Mercurial > public > ostc4
annotate Small_CPU/Src/baseCPU2.c @ 943:e7f87ade3037 Evo_2_23
Added missing compile switches
| author | Ideenmodellierer |
|---|---|
| date | Mon, 16 Dec 2024 19:33:20 +0100 |
| parents | 06aaccaf2e02 |
| children |
| rev | line source |
|---|---|
| 38 | 1 /** |
| 2 ****************************************************************************** | |
| 3 * @copyright heinrichs weikamp | |
| 4 * @file base.c including main() | |
| 5 * @author heinrichs weikamp gmbh | |
| 6 * @date 15-Aug-2014 | |
| 7 * @version V1.0.3 | |
| 8 * @since 21-Nov-2014 | |
| 9 * @brief The beginning of it all. main() is part of this. | |
| 10 * + Do the inits for hardware | |
| 11 * + Do the inits for sub-systems like menu, dive screen etc. | |
| 12 * + Start IRQs | |
| 13 * + Start MainTasks not in IRQs | |
| 14 * @bug | |
| 15 * @warning | |
| 16 @verbatim | |
| 17 ============================================================================== | |
|
286
733877ab87d9
Minor: Some Texts fixed, allign RTErequired* values with RTE firmware
heinrichsweikamp
parents:
280
diff
changeset
|
18 ##### What about hardware without 8 MHz oscillator ##### |
| 38 | 19 ============================================================================== |
| 20 [..] modify OTP Byte 1 at 0x1FFF7800 with ST-Link utility | |
| 21 | |
| 22 ============================================================================== | |
| 23 ##### Where is the RTE Firmware version ##### | |
| 24 ============================================================================== | |
| 25 [..] in baseCPU2.c <just here below :-> | |
| 26 | |
| 27 ============================================================================== | |
| 28 ##### What to do with the RTE Firmware version ##### | |
| 29 ============================================================================== | |
| 30 [..] change the values RTErequiredHigh and RTErequiredLow in settings.c | |
| 31 to start warning via the firmware if not updated | |
| 32 | |
| 33 ============================================================================== | |
| 34 ##### What it does ##### | |
| 35 ============================================================================== | |
|
286
733877ab87d9
Minor: Some Texts fixed, allign RTErequired* values with RTE firmware
heinrichsweikamp
parents:
280
diff
changeset
|
36 [..] All realtime stuff and all what has to be done during sleep |
| 38 | 37 |
| 38 [..] RealTimeClock. The entire time and date handling (including divetime) | |
| 39 [..] Hardware control for pressure sensor, compass, battery monitor | |
| 40 [..] Calculations of tissue load, critical radius, otu, cns | |
| 41 [..] Switching off the power of the main CPU after request from it. | |
| 42 | |
| 43 ============================================================================== | |
| 44 ##### IRQs ##### | |
| 45 ============================================================================== | |
| 46 [..] The IRQs are are only used for SystemTick and SPI TransferComplete after | |
| 47 DMA data reception. | |
| 48 | |
| 49 [..] HAL_SPI_TxRxCpltCallback() restarts DMA and will call | |
| 50 scheduleSpecial_Evaluate_DataSendToSlave() only if it is not blocked | |
|
239
e4207f0aaa4b
cleanup: factor out dataSendToSlaveStopEval
Jan Mulder <jlmulder@xs4all.nl>
parents:
207
diff
changeset
|
51 by I2C. |
| 38 | 52 If the evaluation is blocked it has to be tested and executed afterwards. |
| 53 I2C is executed _without_ the usage of interrupts. | |
| 54 | |
| 55 ============================================================================== | |
| 56 ##### Main loop ##### | |
| 57 ============================================================================== | |
| 58 [..] is a combination of the while loop below in main.c and code in scheduler.c | |
| 59 It is similar to the DR5 code / logic - in contrast to the main CPU | |
| 60 Switching the state is done via global.mode | |
| 61 The loops in scheduler all run in the main execution thread without | |
| 62 any job stacks (like it was in the DR5). | |
| 63 | |
| 64 ============================================================================== | |
| 65 ##### Real Time Clock ##### | |
| 66 ============================================================================== | |
|
286
733877ab87d9
Minor: Some Texts fixed, allign RTErequired* values with RTE firmware
heinrichsweikamp
parents:
280
diff
changeset
|
67 The RTC is a separate part of hardware inside the CPU and is not affected |
| 38 | 68 by reset. Only power-on reset does change something. |
| 69 This is fine but the RTC is vital for the Sleep mode as Wakeuptimer. | |
| 70 This is the only date/time system in the OSTC. The main CPU is passive. | |
|
286
733877ab87d9
Minor: Some Texts fixed, allign RTErequired* values with RTE firmware
heinrichsweikamp
parents:
280
diff
changeset
|
71 Data transfer is done with localtime_rtc_tr and localtime_rtc_dr |
| 38 | 72 in HAL_RTC format to the main CPU and as HAL_RTC structs the way back for |
| 73 setting the actual time and date. | |
| 74 The RTC unit has 20 Byte of V_bat powered SRAM. It could be used | |
|
286
733877ab87d9
Minor: Some Texts fixed, allign RTErequired* values with RTE firmware
heinrichsweikamp
parents:
280
diff
changeset
|
75 for something useful in both CPUs. |
| 38 | 76 |
| 77 ============================================================================== | |
| 78 ##### File system ##### | |
| 79 ============================================================================== | |
| 80 [..] some files are used for both CPUs, like decom.c/.h, data_central.h, ... | |
| 81 | |
| 82 | |
| 83 ============================================================================== | |
| 84 ##### Unique device ID register (96 bits) ##### | |
| 85 ============================================================================== | |
| 86 [..] some files are used for both CPUs, like decom.c/.h, data_central.h, ... | |
| 87 | |
| 88 | |
| 89 ============================================================================== | |
| 90 ##### I2C ##### | |
| 91 ============================================================================== | |
| 92 [..] used for pressure, compass, (accelerator) and battery gauge | |
| 93 main cpu and pic (button) is spi | |
| 94 | |
| 95 | |
| 96 ============================================================================== | |
| 97 ##### Firmware Update Info ##### | |
| 98 ============================================================================== | |
| 99 V0.85 160531 scheduleCheck_pressure_reached_dive_mode_level() changes | |
|
286
733877ab87d9
Minor: Some Texts fixed, allign RTErequired* values with RTE firmware
heinrichsweikamp
parents:
280
diff
changeset
|
100 160606 global.no_fly_time_minutes is at least 24h after the dive |
| 38 | 101 160613 ambient light fixed |
| 102 160720 compass calib to Flash (8000 writes max. as erase has problems) | |
| 103 160829 do not reset main CPU on power on! | |
| 104 V0.91 161018 pressure_calculation_AN520_004_mod_MS5803_30BA__09_2015(); | |
| 105 V0.92+ 161020 global.sensorError[MAX_SENSORS] | |
| 106 fix missing init_pressure(); at powerUp of RTE | |
| 107 added HAL_StatusTypeDef for many functions in pressure.c | |
| 108 161024 no_fly_time_minutes Backup FIX | |
| 109 seconds_since_last_dive now related to RTC clock | |
| 110 161121 close to surface starts at 1 meter below last known surface pressure | |
|
286
733877ab87d9
Minor: Some Texts fixed, allign RTErequired* values with RTE firmware
heinrichsweikamp
parents:
280
diff
changeset
|
111 161121 in surface mode dive mode starts @1 mtr difference if surface 880 hPa instead of 700 hPa before |
| 38 | 112 V0.97+ 170213 added global.dataSendToSlave.diveModeInfo for DIVEMODE_Apnea |
| 113 added global.dataSendToSlave.setEndDive | |
| 114 DIVEMODE_Apnea special in scheduler.c (ticksdiff >= 1000) -> no tissue, cns, otu, no change in noFly Time etc. | |
| 115 V0.99 170320 new HAL Driver Repository | |
| 116 V1.01 170509 old HAL Driver Repository | |
| 117 | |
| 118 @endverbatim | |
| 119 ****************************************************************************** | |
| 120 * @attention | |
| 121 * | |
| 122 * <h2><center>© COPYRIGHT(c) 2017 heinrichs weikamp</center></h2> | |
| 123 * | |
| 124 ****************************************************************************** | |
| 125 */ | |
| 126 | |
| 127 //#define DEBUG_PIN_ACTIVE | |
| 128 /* Includes ------------------------------------------------------------------*/ | |
| 129 | |
| 130 #include "baseCPU2.h" | |
| 131 | |
| 132 // From Small_CPU/Inc: | |
| 133 #include "dma.h" | |
| 134 #include "i2c.h" | |
| 135 #include "spi.h" | |
| 136 #include "rtc.h" | |
| 137 #include "adc.h" | |
| 936 | 138 #include "gpio.h" |
| 38 | 139 #include "compass.h" |
| 140 #include "pressure.h" | |
| 141 #include "batteryGasGauge.h" | |
| 142 #include "batteryCharger.h" | |
| 143 #include "scheduler.h" | |
| 144 #include "tm_stm32f4_otp.h" | |
|
554
3328189786e7
Added external ADC interface functionality (MCP3424):
Ideenmodellierer
parents:
533
diff
changeset
|
145 #include "externalInterface.h" |
| 662 | 146 #include "uart.h" |
| 922 | 147 #include "uart_Internal.h" |
| 936 | 148 #include "uartProtocol_GNSS.h" |
| 889 | 149 #include "GNSS.h" |
| 938 | 150 #include "configuration.h" |
| 889 | 151 |
| 38 | 152 |
| 153 // From Common/Inc: | |
| 154 #include "calc_crush.h" | |
| 155 #include "decom.h" | |
| 156 #include "FirmwareData.h" | |
| 157 | |
| 158 // From Common/Drivers/ | |
| 159 #include <stdio.h> | |
| 160 | |
| 889 | 161 |
| 433 | 162 uint8_t coldstart __attribute__((section (".noinit"))); |
| 163 | |
| 89 | 164 uint8_t hasExternalClock(void) { |
| 165 if ((TM_OTP_Read(0, 0) > 0) && (TM_OTP_Read(0, 0) < 0xFF)) | |
| 166 return 1; | |
| 167 else | |
| 168 return 0; | |
| 38 | 169 } |
| 170 | |
| 171 // SHALL LOAD AT 0x08000000 + 0x00005000 = 0x08005000. | |
| 172 // See CPU2-RTE.ld | |
| 100 | 173 const SFirmwareData cpu2_FirmwareData __attribute__(( section(".firmware_data") ))= { |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
713
diff
changeset
|
174 .versionFirst = 3, |
|
899
2225c467f1e9
Added data path and visualization for position data:
Ideenmodellierer
parents:
890
diff
changeset
|
175 .versionSecond = 4, |
| 762 | 176 .versionThird = 0, |
| 843 | 177 .versionBeta = 1, |
| 38 | 178 |
| 89 | 179 /* 4 bytes with trailing 0 */ |
| 100 | 180 .signature = "mh", |
| 38 | 181 |
| 762 | 182 .release_year = 23, |
| 818 | 183 .release_month = 9, |
| 184 .release_day = 14, | |
| 100 | 185 .release_sub = 0, |
| 38 | 186 |
| 89 | 187 /* max 48 with trailing 0 */ |
| 188 //release_info ="12345678901234567890123456789012345678901" | |
| 768 | 189 .release_info = "stable April 2023", |
| 38 | 190 |
| 89 | 191 /* for safety reasons and coming functions */ |
| 192 .magic[0] = FIRMWARE_MAGIC_FIRST, .magic[1] = FIRMWARE_MAGIC_SECOND, | |
| 193 .magic[2] = FIRMWARE_MAGIC_CPU2_RTE, /* the magic byte for RTE */ | |
| 433 | 194 .magic[3] = FIRMWARE_MAGIC_END |
| 195 }; | |
| 196 | |
| 38 | 197 |
| 89 | 198 uint8_t firmwareVersionHigh(void) { |
| 199 return cpu2_FirmwareData.versionFirst; | |
| 38 | 200 } |
| 201 | |
| 89 | 202 uint8_t firmwareVersionLow(void) { |
| 203 return cpu2_FirmwareData.versionSecond; | |
| 38 | 204 } |
| 205 | |
| 206 /** @addtogroup OSTC4 | |
| 207 * @{ | |
| 208 */ | |
| 209 | |
| 210 /** @addtogroup CPU2 | |
| 211 * @{ | |
| 212 */ | |
| 213 | |
| 214 /* Private typedef -----------------------------------------------------------*/ | |
| 215 /* Private define ------------------------------------------------------------*/ | |
| 216 #define BUTTON_OSTC_GPIO_PIN GPIO_PIN_0 | |
| 217 #define BUTTON_OSTC_GPIO_PORT GPIOA | |
| 218 #define BUTTON_OSTC_HAL_RCC_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() | |
| 219 #define BUTTON_OSTC_IRQn EXTI0_IRQn | |
| 220 | |
| 662 | 221 |
| 38 | 222 /* Private macro -------------------------------------------------------------*/ |
| 223 | |
| 224 /* Private variables ---------------------------------------------------------*/ | |
| 225 uint32_t global_test_time_counter = 0; | |
| 226 SBackup backup; | |
| 227 | |
| 228 /* Private function prototypes -----------------------------------------------*/ | |
| 229 static void EXTI_Wakeup_Button_Init(void); | |
| 230 static void EXTI_Wakeup_Button_DeInit(void); | |
| 231 | |
| 183 | 232 #ifdef DEBUG_I2C_LINES |
| 38 | 233 void GPIO_test_I2C_lines(void); |
| 183 | 234 #endif |
| 38 | 235 |
| 236 void sleep_prepare(void); | |
| 237 | |
| 238 void SystemClock_Config(void); | |
| 239 void SystemClock_Config_HSI(void); | |
| 240 void SystemClock_Config_HSE(void); | |
| 241 void SYSCLKConfig_STOP_HSI(void); | |
| 242 void SYSCLKConfig_STOP_HSE(void); | |
| 243 | |
| 244 void GPIO_new_DEBUG_Init(void); | |
| 245 void GPIO_new_DEBUG_LOW(void); | |
| 246 void GPIO_new_DEBUG_HIGH(void); | |
| 247 | |
| 248 #define REGULAR_RUN | |
| 249 | |
| 89 | 250 int __io_putchar(int ch) { |
| 251 ITM_SendChar(ch); | |
| 252 return ch; | |
| 38 | 253 } |
| 254 | |
| 255 /* Private functions ---------------------------------------------------------*/ | |
| 256 | |
| 257 /** | |
| 258 * @brief Main program | |
| 259 * @param None | |
| 260 * @retval None | |
| 261 */ | |
| 120 | 262 /* #define DEBUG_RUNTIME TRUE */ |
| 263 #ifdef DEBUG_RUNTIME | |
| 264 #define MEASURECNT 60 /* number of measuremets to be stored */ | |
| 265 static uint32_t loopcnt[MEASURECNT]; | |
| 266 extern RTC_HandleTypeDef RTCHandle; | |
| 267 #endif | |
| 38 | 268 |
| 89 | 269 int main(void) { |
| 120 | 270 |
| 271 #ifdef DEBUG_RUNTIME | |
| 272 RTC_TimeTypeDef Stime; | |
| 273 uint8_t measurementindex = 0; | |
| 274 uint8_t lastsecond = 0xFF; | |
| 275 #endif | |
| 276 | |
|
917
0d6c4b40fae4
Bugfix external interface power up after sleep:
Ideenmodellierer
parents:
909
diff
changeset
|
277 uint8_t extInterfaceActive = 0; |
| 936 | 278 uint32_t shutdownTick = 0; |
|
917
0d6c4b40fae4
Bugfix external interface power up after sleep:
Ideenmodellierer
parents:
909
diff
changeset
|
279 |
| 89 | 280 HAL_Init(); |
| 281 SystemClock_Config(); | |
| 38 | 282 |
| 89 | 283 HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq() / 1000); |
| 284 HAL_SYSTICK_CLKSourceConfig( SYSTICK_CLKSOURCE_HCLK); | |
| 285 HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0); | |
| 38 | 286 |
| 89 | 287 MX_RTC_init(); |
| 880 | 288 GPIO_LEDs_VIBRATION_Init(); |
| 938 | 289 GPIO_GNSS_Init(); |
| 89 | 290 GPIO_new_DEBUG_Init(); // added 170322 hw |
| 291 initGlobals(); | |
| 38 | 292 |
| 120 | 293 /* printf("CPU2-RTE running...\n"); */ |
| 38 | 294 |
| 329 | 295 HAL_Delay(100); |
| 296 | |
| 89 | 297 MX_I2C1_Init(); |
| 329 | 298 if (global.I2C_SystemStatus != HAL_OK) |
| 299 { | |
| 89 | 300 if (MX_I2C1_TestAndClear() == GPIO_PIN_RESET) { |
| 301 MX_I2C1_TestAndClear(); // do it a second time | |
| 302 } | |
|
488
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
473
diff
changeset
|
303 HAL_Delay(100); |
|
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
473
diff
changeset
|
304 I2C_DeInit(); |
|
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
473
diff
changeset
|
305 HAL_Delay(100); |
| 89 | 306 MX_I2C1_Init(); |
|
488
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
473
diff
changeset
|
307 HAL_Delay(100); |
| 89 | 308 } |
| 38 | 309 |
| 329 | 310 |
| 311 | |
| 89 | 312 //dangerous: TM_OTP_Write(0,0, 0x01); |
| 38 | 313 #ifdef REGULAR_RUN |
| 89 | 314 global.sensorError[SENSOR_PRESSURE_ID] = init_pressure(); |
| 315 global.I2C_SystemStatus = global.sensorError[SENSOR_PRESSURE_ID]; | |
| 329 | 316 if (global.I2C_SystemStatus != HAL_OK) |
| 317 { | |
| 89 | 318 if (MX_I2C1_TestAndClear() == GPIO_PIN_RESET) { |
| 319 MX_I2C1_TestAndClear(); // do it a second time | |
| 320 } | |
|
488
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
473
diff
changeset
|
321 HAL_Delay(100); |
|
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
473
diff
changeset
|
322 I2C_DeInit(); |
|
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
473
diff
changeset
|
323 HAL_Delay(100); |
| 89 | 324 MX_I2C1_Init(); |
|
488
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
473
diff
changeset
|
325 HAL_Delay(100); |
| 89 | 326 global.sensorError[SENSOR_PRESSURE_ID] = init_pressure(); |
| 327 global.I2C_SystemStatus = global.sensorError[SENSOR_PRESSURE_ID]; | |
| 328 } | |
| 38 | 329 |
| 89 | 330 global.dataSendToMaster.sensorErrors = |
| 331 global.sensorError[SENSOR_PRESSURE_ID]; | |
| 329 | 332 |
| 333 if(is_init_pressure_done()) | |
| 334 { | |
|
339
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
334
diff
changeset
|
335 init_surface_ring(0); |
| 329 | 336 } |
| 89 | 337 init_battery_gas_gauge(); |
| 338 HAL_Delay(10); | |
| 339 battery_gas_gauge_get_data(); | |
|
473
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
340 |
| 662 | 341 global.lifeData.battery_voltage = get_voltage(); |
| 342 global.lifeData.battery_charge = get_charge(); | |
| 343 copyBatteryData(); | |
| 344 | |
|
473
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
345 MX_SPI3_Init(); |
|
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
346 |
|
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
347 if(coldstart != 0xA5) /* Not reading a 0xA5 means the memory cells has not been initialized before => cold start */ |
| 433 | 348 { |
| 349 coldstart = 0xA5; | |
| 662 | 350 |
| 351 set_charge_state(Charger_ColdStart); | |
| 352 | |
|
473
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
353 global.dataSendToMaster.power_on_reset = 1; |
|
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
354 global.deviceDataSendToMaster.power_on_reset = 1; |
|
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
355 |
|
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
356 if (!scheduleSetButtonResponsiveness()) |
|
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
357 { |
|
763
aa6006975e76
increase HAL_Delay to 10ms for cold-start-button reset
heinrichsweikamp
parents:
762
diff
changeset
|
358 HAL_Delay(10); |
|
473
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
359 if (!scheduleSetButtonResponsiveness()) // send again, if problem it's not my problem here. |
|
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
360 { |
|
763
aa6006975e76
increase HAL_Delay to 10ms for cold-start-button reset
heinrichsweikamp
parents:
762
diff
changeset
|
361 HAL_Delay(10); |
|
473
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
362 scheduleSetButtonResponsiveness(); // init |
|
763
aa6006975e76
increase HAL_Delay to 10ms for cold-start-button reset
heinrichsweikamp
parents:
762
diff
changeset
|
363 HAL_Delay(10); |
|
473
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
364 } |
|
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
365 } |
| 433 | 366 } |
| 662 | 367 else |
| 368 { | |
| 369 set_charge_state(Charger_NotConnected); | |
| 370 } | |
| 38 | 371 |
| 89 | 372 ADCx_Init(); |
| 373 GPIO_Power_MainCPU_Init(); | |
| 662 | 374 |
| 375 externalInterface_InitPower33(); | |
| 376 | |
| 89 | 377 global.mode = MODE_POWERUP; |
| 38 | 378 #else |
| 89 | 379 init_pressure(); |
|
339
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
334
diff
changeset
|
380 init_surface_ring(0); |
| 38 | 381 |
| 89 | 382 ADCx_Init(); |
| 383 GPIO_Power_MainCPU_Init(); | |
| 384 global.mode = MODE_TEST; | |
| 38 | 385 #endif |
| 89 | 386 while (1) { |
| 120 | 387 /* printf("Global mode = %d\n", global.mode); */ |
| 38 | 388 |
| 89 | 389 switch (global.mode) { |
| 390 case MODE_POWERUP: | |
| 391 case MODE_BOOT: | |
| 392 // ReInit_battery_charger_status_pins(); | |
| 393 compass_init(0, 7); | |
| 394 accelerator_init(); | |
|
554
3328189786e7
Added external ADC interface functionality (MCP3424):
Ideenmodellierer
parents:
533
diff
changeset
|
395 externalInterface_Init(); |
| 181 | 396 |
| 89 | 397 if (global.mode == MODE_BOOT) { |
| 398 GPIO_Power_MainCPU_OFF(); | |
| 922 | 399 #ifdef ENABLE_GPIO_V2 |
| 880 | 400 GPIO_LED_GREEN_ON(); |
|
903
0f2e5a166d40
Disable GNSS operations using compile switch:
Ideenmodellierer
parents:
900
diff
changeset
|
401 #endif |
| 89 | 402 HAL_Delay(100); // for GPIO_Power_MainCPU_ON(); |
| 403 GPIO_Power_MainCPU_ON(); | |
| 922 | 404 #ifdef ENABLE_GPIO_V2 |
| 880 | 405 GPIO_LED_GREEN_OFF(); |
| 406 | |
| 407 GPIO_LED_RED_ON(); | |
| 900 | 408 GPIO_VIBRATION_ON(); |
|
903
0f2e5a166d40
Disable GNSS operations using compile switch:
Ideenmodellierer
parents:
900
diff
changeset
|
409 #endif |
| 880 | 410 HAL_Delay(100); |
| 922 | 411 #ifdef ENABLE_GPIO_V2 |
| 880 | 412 GPIO_LED_RED_OFF(); |
| 413 GPIO_VIBRATION_OFF(); | |
|
903
0f2e5a166d40
Disable GNSS operations using compile switch:
Ideenmodellierer
parents:
900
diff
changeset
|
414 #endif |
| 89 | 415 } |
| 922 | 416 #ifdef ENABLE_GPIO_V2 |
| 900 | 417 GPIO_LED_RED_OFF(); |
| 418 GPIO_LED_GREEN_OFF(); | |
| 419 GPIO_VIBRATION_OFF(); | |
|
903
0f2e5a166d40
Disable GNSS operations using compile switch:
Ideenmodellierer
parents:
900
diff
changeset
|
420 #endif |
| 89 | 421 SPI_synchronize_with_Master(); |
| 422 MX_DMA_Init(); | |
| 423 MX_SPI1_Init(); | |
|
134
0586ae83a243
Removed cyclic (by timer) send on slave side
Ideenmodellierer
parents:
120
diff
changeset
|
424 SPI_Start_single_TxRx_with_Master(); /* be prepared for the first data exchange */ |
| 207 | 425 Scheduler_Request_sync_with_SPI(SPI_SYNC_METHOD_HARD); |
| 889 | 426 |
| 922 | 427 #ifdef ENABLE_GPIO_V2 |
| 889 | 428 // GNSS tests |
| 429 GNSS_IO_init(); | |
| 900 | 430 GPIO_GPS_ON(); |
| 431 GPIO_GPS_BCKP_ON(); | |
| 889 | 432 MX_USART6_UART_Init(); |
| 433 GNSS_Init(&GNSS_Handle, &huart6); | |
| 932 | 434 #else |
| 435 #ifdef ENABLE_GNSS_SUPPORT | |
| 436 GNSS_Init(&GNSS_Handle, &huart1); | |
| 437 #endif | |
| 900 | 438 #endif |
|
899
2225c467f1e9
Added data path and visualization for position data:
Ideenmodellierer
parents:
890
diff
changeset
|
439 |
| 89 | 440 global.mode = MODE_SURFACE; |
| 441 break; | |
| 38 | 442 |
| 89 | 443 case MODE_CALIB: |
| 90 | 444 scheduleCompassCalibrationMode(); |
| 89 | 445 break; |
| 446 | |
| 447 case MODE_SURFACE: | |
| 448 scheduleSurfaceMode(); | |
| 449 break; | |
| 38 | 450 |
| 89 | 451 case MODE_TEST: |
| 452 break; | |
| 38 | 453 |
| 89 | 454 case MODE_DIVE: |
| 90 | 455 backup.no_fly_time_minutes = global.no_fly_time_minutes; |
| 456 backup.seconds_since_last_dive = global.seconds_since_last_dive; | |
| 457 | |
| 458 vpm_init( &global.vpm, global.conservatism, global.repetitive_dive, | |
| 459 global.seconds_since_last_dive ); | |
| 460 global.no_fly_time_minutes = 0; | |
| 461 global.lifeData.dive_time_seconds = 0; | |
| 462 global.lifeData.dive_time_seconds_without_surface_time = 0; | |
| 943 | 463 #if defined ENABLE_GNSS_SUPPORT || defined ENABLE_GPIO_V2 |
| 942 | 464 uartGnss_ReqPowerDown(1); |
| 943 | 465 #endif |
| 90 | 466 scheduleDiveMode(); |
| 467 // done now in scheduler prior to change mode: global.seconds_since_last_dive = 1; | |
| 468 | |
| 469 if( global.lifeData.dive_time_seconds > 60 ) | |
| 470 { | |
| 471 //No Fly time 60% of desaturationtime after dive | |
| 472 global.no_fly_time_minutes = decom_calc_desaturation_time( | |
| 473 global.lifeData.tissue_nitrogen_bar, | |
| 474 global.lifeData.tissue_helium_bar, | |
| 475 global.lifeData.pressure_surface_bar ) * 60 / 100; | |
| 476 if( global.no_fly_time_minutes < (24 * 60) ) | |
| 477 global.no_fly_time_minutes = 24 * 60; | |
| 478 } | |
| 479 else | |
| 480 { | |
| 481 global.no_fly_time_minutes = backup.no_fly_time_minutes; | |
| 482 global.seconds_since_last_dive = backup.seconds_since_last_dive; | |
| 483 } | |
| 484 | |
| 485 global.lifeData.dive_time_seconds = 0; | |
| 486 global.lifeData.dive_time_seconds_without_surface_time = 0; | |
| 487 global.lifeData.counterSecondsShallowDepth = 0; | |
| 488 | |
| 489 backup.no_fly_time_minutes = 0; | |
| 490 backup.seconds_since_last_dive = 0; | |
| 943 | 491 #if defined ENABLE_GNSS_SUPPORT || defined ENABLE_GPIO_V2 |
| 942 | 492 uartGnss_ReqPowerDown(0); |
| 943 | 493 #endif |
| 89 | 494 break; |
| 38 | 495 |
| 89 | 496 case MODE_SHUTDOWN: |
| 497 HAL_Delay(200); | |
| 936 | 498 |
| 499 MX_SPI3_Init(); | |
| 500 | |
| 501 #if defined ENABLE_GNSS_SUPPORT || defined ENABLE_GPIO_V2 | |
| 502 if(shutdownTick == 0) | |
| 503 { | |
| 504 shutdownTick = HAL_GetTick(); | |
| 505 uartGnss_ReqPowerDown(1); | |
| 506 } | |
| 507 #ifdef ENABLE_GNSS_SUPPORT | |
| 508 externalInterface_HandleUART(); | |
| 509 #else | |
| 510 UART6_HandleUART(); | |
| 511 #endif | |
| 940 | 512 if((uartGnss_GetState() == UART_GNSS_INACTIVE) || (time_elapsed_ms(shutdownTick,HAL_GetTick()) > 3000)) |
| 936 | 513 { |
| 514 global.mode = MODE_SLEEP; | |
| 938 | 515 uartGnss_ReqPowerDown(0); /* release power down request */ |
| 936 | 516 } |
| 517 #else | |
| 89 | 518 global.mode = MODE_SLEEP; |
| 936 | 519 #endif |
| 520 | |
| 521 | |
| 89 | 522 break; |
| 523 | |
| 524 case MODE_SLEEP: | |
|
917
0d6c4b40fae4
Bugfix external interface power up after sleep:
Ideenmodellierer
parents:
909
diff
changeset
|
525 extInterfaceActive = externalInterface_isEnabledPower33(); |
| 839 | 526 externalInterface_SwitchUART(EXT_INTERFACE_UART_OFF); |
| 662 | 527 externalInterface_SwitchPower33(false); |
| 89 | 528 if (hasExternalClock()) |
| 529 SystemClock_Config_HSI(); | |
| 887 | 530 GPIO_LEDs_VIBRATION_Init(); |
| 89 | 531 sleep_prepare(); |
| 38 | 532 |
| 940 | 533 while(time_elapsed_ms(shutdownTick,HAL_GetTick()) < 1000 ) /* delay shutdown till shutdown animation is finished */ |
| 534 { | |
| 535 HAL_Delay(10); | |
| 536 } | |
| 537 shutdownTick = 0; | |
| 89 | 538 scheduleSleepMode(); |
| 539 if (hasExternalClock()) | |
| 540 SystemClock_Config_HSE(); | |
| 541 EXTI_Wakeup_Button_DeInit(); | |
| 542 ADCx_Init(); | |
| 543 GPIO_Power_MainCPU_Init(); | |
| 544 GPIO_Power_MainCPU_ON(); | |
| 545 compass_init(0, 7); | |
| 546 accelerator_init(); | |
|
148
ee744c7160ce
Use SPI TX callback to synchronize to main CPU
Ideenmodellierer
parents:
134
diff
changeset
|
547 SPI_synchronize_with_Master(); |
| 89 | 548 MX_DMA_Init(); |
| 549 MX_SPI1_Init(); | |
|
148
ee744c7160ce
Use SPI TX callback to synchronize to main CPU
Ideenmodellierer
parents:
134
diff
changeset
|
550 SPI_Start_single_TxRx_with_Master(); |
| 89 | 551 |
|
917
0d6c4b40fae4
Bugfix external interface power up after sleep:
Ideenmodellierer
parents:
909
diff
changeset
|
552 if(extInterfaceActive) |
| 662 | 553 { |
| 554 externalInterface_SwitchPower33(true); | |
| 555 } | |
|
738
30717de00f3a
Added data init function for external interface:
Ideenmodellierer
parents:
728
diff
changeset
|
556 externalInterface_InitDatastruct(); |
| 89 | 557 // EXTILine0_Button_DeInit(); not now, later after testing |
| 558 break; | |
| 559 } | |
| 120 | 560 |
| 561 #ifdef DEBUG_RUNTIME | |
| 562 HAL_RTC_GetTime(&RTCHandle, &Stime, RTC_FORMAT_BCD); | |
| 563 | |
| 564 if(lastsecond == 0xFF) | |
| 565 { | |
| 566 measurementindex = 0; | |
| 567 loopcnt[measurementindex] = 0; | |
| 568 lastsecond = Stime.Seconds; | |
| 569 } | |
| 570 loopcnt[measurementindex]++; | |
| 571 | |
| 572 if(lastsecond != Stime.Seconds) | |
| 573 { | |
| 574 measurementindex++; | |
| 575 if (measurementindex == MEASURECNT) measurementindex = 0; | |
| 576 loopcnt[measurementindex] = 0; | |
| 577 lastsecond = Stime.Seconds; | |
| 578 if(measurementindex +1 < MEASURECNT) loopcnt[measurementindex +1] = 0xffff; /* helps to identify the latest value */ | |
| 579 } | |
| 580 #endif | |
| 89 | 581 } |
| 38 | 582 } |
| 583 | |
| 584 /** @brief Button feedback - EXTI line detection callbacks | |
| 585 * @param GPIO_Pin: Specifies the pins connected EXTI line | |
| 586 * @retval None | |
| 587 */ | |
| 89 | 588 void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) { |
| 38 | 589 |
| 89 | 590 if (GPIO_Pin == BUTTON_OSTC_GPIO_PIN) { |
| 591 if (global.mode == MODE_SLEEP) { | |
| 592 global.mode = MODE_BOOT; | |
| 593 } | |
| 594 } | |
| 595 else | |
| 880 | 596 { |
| 597 | |
| 89 | 598 } |
| 38 | 599 } |
| 600 | |
| 601 /** | |
| 602 * @brief System Clock Configuration | |
| 603 * The system Clock is configured as follow : | |
| 604 * System Clock source = PLL (HSI) | |
| 605 * SYSCLK(Hz) = 100 MHz | |
| 606 * HCLK(Hz) = 100 MHz | |
| 607 * AHB Prescaler = 1 | |
| 608 * APB1 Prescaler = 2 | |
| 609 * APB2 Prescaler = 1 | |
| 610 * HSI Frequency(Hz) = 16 MHz | |
| 611 * PLL_M = 16 | |
| 612 * PLL_N = 400 | |
| 613 * PLL_P = 4 | |
| 614 * PLL_Q = 7 // no USB | |
| 615 * VDD(V) = 3.3 | |
| 616 * Main regulator output voltage = Scale1 mode | |
| 617 * Flash Latency(WS) = 3 | |
| 618 * @param None | |
| 619 * @retval None | |
| 620 */ | |
| 621 | |
| 89 | 622 void SystemClock_Config(void) { |
| 623 if (hasExternalClock()) | |
| 624 SystemClock_Config_HSE(); | |
| 625 else | |
| 626 SystemClock_Config_HSI(); | |
| 38 | 627 } |
| 628 | |
| 89 | 629 void SYSCLKConfig_STOP(void) { |
| 630 SYSCLKConfig_STOP_HSI(); | |
| 38 | 631 } |
| 632 | |
| 89 | 633 void SystemClock_Config_HSE(void) { |
| 634 RCC_OscInitTypeDef RCC_OscInitStruct; | |
| 635 RCC_ClkInitTypeDef RCC_ClkInitStruct; | |
| 38 | 636 // RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; |
| 637 | |
| 89 | 638 __PWR_CLK_ENABLE(); // is identical to __HAL_RCC_PWR_CLK_ENABLE(); |
| 38 | 639 |
| 887 | 640 __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); |
| 38 | 641 |
| 89 | 642 RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; //|RCC_OSCILLATORTYPE_LSE; |
| 643 RCC_OscInitStruct.HSEState = RCC_HSE_ON; | |
| 644 //RCC_OscInitStruct.LSEState = RCC_LSE_ON; | |
| 645 RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; | |
| 646 RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; | |
| 647 RCC_OscInitStruct.PLL.PLLM = 8; | |
| 648 RCC_OscInitStruct.PLL.PLLN = 320; | |
| 649 RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; | |
| 650 RCC_OscInitStruct.PLL.PLLQ = 4; | |
| 651 HAL_RCC_OscConfig(&RCC_OscInitStruct); | |
| 38 | 652 |
| 89 | 653 RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK |
| 654 | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; | |
| 655 RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; | |
| 656 RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; | |
| 657 RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; | |
| 658 RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; | |
| 659 HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); | |
| 38 | 660 |
| 661 // PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC; | |
| 662 // PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE; | |
| 663 // HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); | |
| 664 | |
| 665 // HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq()/1000); | |
| 666 | |
| 667 // HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK); | |
| 668 | |
| 89 | 669 /* SysTick_IRQn interrupt configuration */ |
| 38 | 670 // HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0); |
| 671 } | |
| 672 | |
| 89 | 673 void SystemClock_Config_HSI(void) { |
| 674 RCC_ClkInitTypeDef RCC_ClkInitStruct; | |
| 675 RCC_OscInitTypeDef RCC_OscInitStruct; | |
| 38 | 676 |
| 89 | 677 /* Enable Power Control clock */ |
| 678 __HAL_RCC_PWR_CLK_ENABLE(); | |
| 38 | 679 |
| 89 | 680 /* The voltage scaling allows optimizing the power consumption when the device is |
| 681 clocked below the maximum system frequency, to update the voltage scaling value | |
| 682 regarding system frequency refer to product datasheet. */ | |
| 887 | 683 __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); |
| 38 | 684 |
| 89 | 685 /* Enable HSI Oscillator and activate PLL with HSI as source */ |
| 686 RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; | |
| 687 RCC_OscInitStruct.HSIState = RCC_HSI_ON; | |
| 688 RCC_OscInitStruct.HSICalibrationValue = 0x10; | |
| 689 RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; | |
| 690 RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; | |
| 691 RCC_OscInitStruct.PLL.PLLM = 16; | |
| 692 RCC_OscInitStruct.PLL.PLLN = 320; | |
| 693 RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; | |
| 694 RCC_OscInitStruct.PLL.PLLQ = 4; | |
| 695 HAL_RCC_OscConfig(&RCC_OscInitStruct); | |
| 38 | 696 |
| 89 | 697 /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 |
| 698 clocks dividers */ | |
| 699 RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | |
| 700 | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); | |
| 701 RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; | |
| 702 RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; | |
| 703 RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; | |
| 704 RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; | |
| 705 HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); | |
| 38 | 706 } |
| 707 | |
| 708 | |
| 709 /** | |
| 710 * @brief Configures system clock after wake-up from STOP: enable HSI, PLL | |
| 711 * and select PLL as system clock source. | |
| 712 * @param None | |
| 713 * @retval None | |
| 714 */ | |
| 89 | 715 void SYSCLKConfig_STOP_HSE(void) { |
| 716 RCC_ClkInitTypeDef RCC_ClkInitStruct; | |
| 717 RCC_OscInitTypeDef RCC_OscInitStruct; | |
| 718 uint32_t pFLatency = 0; | |
| 38 | 719 |
| 89 | 720 /* Get the Oscillators configuration according to the internal RCC registers */ |
| 721 HAL_RCC_GetOscConfig(&RCC_OscInitStruct); | |
| 38 | 722 |
| 89 | 723 /* After wake-up from STOP reconfigure the system clock: Enable HSI and PLL */ |
| 724 RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; | |
| 725 RCC_OscInitStruct.HSIState = RCC_HSE_ON; | |
| 726 RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; | |
| 727 HAL_RCC_OscConfig(&RCC_OscInitStruct); | |
| 38 | 728 |
| 89 | 729 /* Get the Clocks configuration according to the internal RCC registers */ |
| 730 HAL_RCC_GetClockConfig(&RCC_ClkInitStruct, &pFLatency); | |
| 38 | 731 |
| 89 | 732 /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 |
| 733 clocks dividers */ | |
| 734 RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK; | |
| 735 RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; | |
| 736 HAL_RCC_ClockConfig(&RCC_ClkInitStruct, pFLatency); | |
| 38 | 737 } |
| 738 | |
| 89 | 739 void SYSCLKConfig_STOP_HSI(void) { |
| 740 RCC_ClkInitTypeDef RCC_ClkInitStruct; | |
| 741 RCC_OscInitTypeDef RCC_OscInitStruct; | |
| 742 uint32_t pFLatency = 0; | |
| 38 | 743 |
| 89 | 744 /* Get the Oscillators configuration according to the internal RCC registers */ |
| 745 HAL_RCC_GetOscConfig(&RCC_OscInitStruct); | |
| 38 | 746 |
| 89 | 747 /* After wake-up from STOP reconfigure the system clock: Enable HSI and PLL */ |
| 748 RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; | |
| 749 RCC_OscInitStruct.HSIState = RCC_HSI_ON; | |
| 750 RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; | |
| 751 RCC_OscInitStruct.HSICalibrationValue = 0x10; | |
| 752 HAL_RCC_OscConfig(&RCC_OscInitStruct); | |
| 38 | 753 |
| 89 | 754 /* Get the Clocks configuration according to the internal RCC registers */ |
| 755 HAL_RCC_GetClockConfig(&RCC_ClkInitStruct, &pFLatency); | |
| 38 | 756 |
| 89 | 757 /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 |
| 758 clocks dividers */ | |
| 759 RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK; | |
| 760 RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; | |
| 761 HAL_RCC_ClockConfig(&RCC_ClkInitStruct, pFLatency); | |
| 38 | 762 } |
| 763 | |
| 764 /** | |
| 765 * @brief SYSTICK callback | |
| 766 * @param None | |
| 767 * @retval None | |
| 768 */ | |
| 89 | 769 void HAL_SYSTICK_Callback(void) { |
| 770 HAL_IncTick(); | |
| 38 | 771 } |
| 772 | |
| 773 /** | |
| 774 * @brief Configures GPIO for LED | |
| 775 * Might move with STM32Cube usage | |
| 776 * @param None | |
| 777 * @retval None | |
| 778 */ | |
| 779 /* | |
| 780 void GPIO_test_I2C_lines(void) | |
| 781 { | |
| 782 GPIO_InitTypeDef GPIO_InitStructure; | |
| 783 __GPIOB_CLK_ENABLE(); | |
| 784 GPIO_InitStructure.Pin = GPIO_PIN_8; | |
| 785 GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP; | |
| 786 GPIO_InitStructure.Pull = GPIO_PULLUP; | |
| 787 GPIO_InitStructure.Speed = GPIO_SPEED_LOW; | |
| 788 HAL_GPIO_Init(GPIOB, &GPIO_InitStructure); | |
| 789 GPIO_InitStructure.Pin = GPIO_PIN_9; | |
| 790 HAL_GPIO_Init(GPIOB, &GPIO_InitStructure); | |
| 791 | |
| 792 HAL_GPIO_WritePin(GPIOB,GPIO_PIN_8,GPIO_PIN_SET); | |
| 793 HAL_GPIO_WritePin(GPIOB,GPIO_PIN_9,GPIO_PIN_RESET); | |
| 794 HAL_Delay(10); | |
| 795 HAL_GPIO_WritePin(GPIOB,GPIO_PIN_9,GPIO_PIN_SET); | |
| 796 HAL_GPIO_WritePin(GPIOB,GPIO_PIN_8,GPIO_PIN_RESET); | |
| 797 HAL_Delay(10); | |
| 798 } | |
| 799 */ | |
| 800 | |
| 89 | 801 void GPIO_new_DEBUG_Init(void) { |
| 38 | 802 #ifdef DEBUG_PIN_ACTIVE |
| 89 | 803 GPIO_InitTypeDef GPIO_InitStructure; |
| 38 | 804 |
| 89 | 805 __GPIOC_CLK_ENABLE(); |
| 662 | 806 GPIO_InitStructure.Pin = LED_CONTROL_PIN; |
| 89 | 807 GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP; |
| 808 GPIO_InitStructure.Pull = GPIO_PULLUP; | |
| 809 GPIO_InitStructure.Speed = GPIO_SPEED_FAST; | |
| 810 HAL_GPIO_Init(GPIOA, &GPIO_InitStructure); | |
| 38 | 811 #endif |
| 812 } | |
| 813 | |
| 89 | 814 void GPIO_new_DEBUG_LOW(void) { |
| 38 | 815 #ifdef DEBUG_PIN_ACTIVE |
| 662 | 816 HAL_GPIO_WritePin(GPIOC,LED_CONTROL_PIN,GPIO_PIN_RESET); |
| 38 | 817 #endif |
| 818 } | |
| 819 | |
| 89 | 820 void GPIO_new_DEBUG_HIGH(void) { |
| 38 | 821 #ifdef DEBUG_PIN_ACTIVE |
| 662 | 822 HAL_GPIO_WritePin(GPIOC,LED_CONTROL_PIN,GPIO_PIN_SET); |
| 38 | 823 #endif |
| 824 } | |
| 825 | |
| 826 /** | |
| 827 * @brief Configures EXTI Line0 (connected to PA0 + PA1 pin) in interrupt mode | |
| 828 * @param None | |
| 829 * @retval None | |
| 830 */ | |
| 831 | |
| 89 | 832 static void EXTI_Wakeup_Button_Init(void) { |
| 833 GPIO_InitTypeDef GPIO_InitStructure; | |
| 38 | 834 |
| 89 | 835 __HAL_RCC_GPIOA_CLK_ENABLE(); |
| 836 BUTTON_OSTC_HAL_RCC_GPIO_CLK_ENABLE(); | |
| 837 GPIO_InitStructure.Pin = BUTTON_OSTC_GPIO_PIN; | |
| 838 GPIO_InitStructure.Mode = GPIO_MODE_IT_FALLING; | |
| 839 GPIO_InitStructure.Pull = GPIO_NOPULL; | |
| 840 HAL_GPIO_Init( BUTTON_OSTC_GPIO_PORT, &GPIO_InitStructure); | |
| 38 | 841 |
| 89 | 842 HAL_NVIC_SetPriority( BUTTON_OSTC_IRQn, 0x0F, 0); |
| 843 HAL_NVIC_EnableIRQ( BUTTON_OSTC_IRQn); | |
| 38 | 844 } |
| 845 | |
| 89 | 846 static void EXTI_Wakeup_Button_DeInit(void) { |
| 847 GPIO_InitTypeDef GPIO_InitStructure; | |
| 38 | 848 |
| 89 | 849 GPIO_InitStructure.Mode = GPIO_MODE_ANALOG; |
| 850 GPIO_InitStructure.Speed = GPIO_SPEED_LOW; | |
| 851 GPIO_InitStructure.Pull = GPIO_NOPULL; | |
| 38 | 852 |
| 89 | 853 GPIO_InitStructure.Pin = BUTTON_OSTC_GPIO_PIN; |
| 854 HAL_GPIO_Init( BUTTON_OSTC_GPIO_PORT, &GPIO_InitStructure); | |
| 855 HAL_NVIC_DisableIRQ( BUTTON_OSTC_IRQn); | |
| 38 | 856 } |
| 857 | |
| 858 /** | |
| 859 * @brief Wake Up Timer callback | |
| 860 * @param hrtc: RTC handle | |
| 861 * @retval None | |
| 862 */ | |
| 863 | |
| 864 /* | |
| 865 void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc) | |
| 866 { | |
| 867 static uint8_t uwCounter = 0; | |
| 868 uwCounter = 1; | |
| 869 } | |
| 870 */ | |
| 871 | |
| 89 | 872 void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *I2cHandle) { |
| 38 | 873 |
| 874 } | |
| 875 | |
| 89 | 876 void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *I2cHandle) { |
| 38 | 877 |
| 878 } | |
| 879 | |
| 89 | 880 void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *I2cHandle) { |
| 38 | 881 |
| 882 } | |
| 883 | |
| 89 | 884 void sleep_prepare(void) { |
| 885 EXTI_Wakeup_Button_Init(); | |
| 662 | 886 |
| 89 | 887 compass_sleep(); |
| 888 HAL_Delay(100); | |
| 889 accelerator_sleep(); | |
| 890 HAL_Delay(100); | |
| 38 | 891 |
| 89 | 892 I2C_DeInit(); |
| 893 MX_SPI_DeInit(); | |
| 894 MX_SPI3_DeInit(); | |
| 895 ADCx_DeInit(); | |
| 38 | 896 |
| 89 | 897 GPIO_InitTypeDef GPIO_InitStruct; |
| 38 | 898 |
| 89 | 899 __HAL_RCC_GPIOA_CLK_ENABLE(); |
| 900 __HAL_RCC_GPIOB_CLK_ENABLE(); | |
| 901 __HAL_RCC_GPIOC_CLK_ENABLE(); | |
| 902 __HAL_RCC_GPIOH_CLK_ENABLE(); | |
| 38 | 903 |
| 89 | 904 GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; |
| 887 | 905 GPIO_InitStruct.Speed = GPIO_SPEED_LOW; |
| 89 | 906 GPIO_InitStruct.Pull = GPIO_NOPULL; |
| 907 GPIO_InitStruct.Pin = GPIO_PIN_All; | |
| 908 HAL_GPIO_Init( GPIOH, &GPIO_InitStruct); | |
| 938 | 909 #ifdef ENABLE_SLEEP_DEBUG |
| 89 | 910 GPIO_InitStruct.Pin = GPIO_PIN_All ^ ( GPIO_PIN_3 | GPIO_PIN_8 | GPIO_PIN_9); /* debug */ |
| 38 | 911 #endif |
| 887 | 912 |
| 936 | 913 /* |
| 887 | 914 GPIO_InitStruct.Pin = GPIO_PIN_All ^ (GPS_POWER_CONTROL_PIN | GPS_BCKP_CONTROL_PIN); |
| 89 | 915 HAL_GPIO_Init( GPIOB, &GPIO_InitStruct); |
| 936 | 916 */ |
| 887 | 917 GPIO_InitStruct.Pin = GPIO_PIN_All ^ ( MAINCPU_CONTROL_PIN | CHARGE_OUT_PIN | EXT33V_CONTROL_PIN); /* power off & charger in & charge out & OSC32 & ext33Volt */ |
| 662 | 918 |
| 89 | 919 HAL_GPIO_Init( GPIOC, &GPIO_InitStruct); |
| 38 | 920 |
| 887 | 921 GPIO_InitStruct.Pin = GPIO_PIN_All ^ ( GPIO_PIN_0 | VIBRATION_CONTROL_PIN | LED_CONTROL_PIN_RED | LED_CONTROL_PIN_GREEN); |
| 938 | 922 #ifdef ENABLE_SLEEP_DEBUG |
| 89 | 923 GPIO_InitStruct.Pin = GPIO_PIN_All ^ ( GPIO_PIN_0 | GPIO_PIN_13 | GPIO_PIN_14); /* wake up button & debug */ |
| 38 | 924 #endif |
| 89 | 925 HAL_GPIO_Init( GPIOA, &GPIO_InitStruct); |
| 38 | 926 |
| 89 | 927 GPIO_InitStruct.Pin = GPIO_PIN_All; |
| 928 HAL_GPIO_Init( GPIOH, &GPIO_InitStruct); | |
| 38 | 929 |
| 89 | 930 GPIO_Power_MainCPU_OFF(); |
| 922 | 931 #ifdef ENABLE_GPIO_V2 |
| 880 | 932 GPIO_LED_GREEN_OFF(); |
| 933 GPIO_LED_RED_OFF(); | |
| 887 | 934 GPIO_VIBRATION_OFF(); |
| 935 GPIO_GPS_BCKP_ON(); // mH : costs 100µA in sleep - beware | |
| 938 | 936 /* GPIO_GPS_OFF(); will be done in transition sleep => deep sleep */ |
| 880 | 937 |
|
890
651d21777b61
cleanup and disable function for GNSS uart and DMA
heinrichsweikamp
parents:
889
diff
changeset
|
938 MX_USART6_UART_DeInit(); |
|
903
0f2e5a166d40
Disable GNSS operations using compile switch:
Ideenmodellierer
parents:
900
diff
changeset
|
939 #endif |
| 938 | 940 #ifndef ENABLE_SLEEP_DEBUG |
| 941 /* | |
| 89 | 942 __HAL_RCC_GPIOB_CLK_DISABLE(); |
| 938 | 943 */ |
| 38 | 944 #endif |
| 89 | 945 __HAL_RCC_GPIOH_CLK_DISABLE(); |
| 38 | 946 } |
| 947 | |
| 948 /* | |
| 949 void sleep_test(void) | |
| 950 { | |
| 951 GPIO_InitTypeDef GPIO_InitStruct; | |
| 952 | |
| 953 __HAL_RCC_GPIOA_CLK_ENABLE(); | |
| 954 __HAL_RCC_GPIOB_CLK_ENABLE(); | |
| 955 __HAL_RCC_GPIOC_CLK_ENABLE(); | |
| 956 __HAL_RCC_GPIOH_CLK_ENABLE(); | |
| 957 | |
| 958 GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; | |
| 959 GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; | |
| 960 GPIO_InitStruct.Pull = GPIO_NOPULL; | |
| 961 GPIO_InitStruct.Pin = GPIO_PIN_All; | |
| 962 HAL_GPIO_Init(GPIOH, &GPIO_InitStruct); | |
| 963 HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); | |
| 964 | |
| 965 GPIO_InitStruct.Pin = GPIO_PIN_All ^ ( GPIO_PIN_0 | GPIO_PIN_15 | GPIO_PIN_14); | |
| 966 HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); | |
| 967 | |
| 968 GPIO_InitStruct.Pin = GPIO_PIN_All ^ ( GPIO_PIN_0); | |
| 969 HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); | |
| 970 | |
| 971 GPIO_Power_MainCPU_OFF(); | |
| 972 | |
| 973 GPIO_InitStruct.Pull = GPIO_PULLUP; | |
| 974 GPIO_InitStruct.Pin = GPIO_PIN_0; | |
| 975 HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); | |
| 976 | |
| 977 // __HAL_RCC_GPIOA_CLK_DISABLE(); | |
| 978 __HAL_RCC_GPIOB_CLK_DISABLE(); | |
| 979 // __HAL_RCC_GPIOC_CLK_DISABLE(); | |
| 980 __HAL_RCC_GPIOH_CLK_DISABLE(); | |
| 981 | |
| 982 | |
| 983 HAL_Delay(5000); | |
| 984 while(1) | |
| 985 { | |
| 986 RTC_StopMode_2seconds(); | |
| 987 HAL_Delay(200); | |
| 988 } | |
| 989 } | |
| 990 */ | |
| 991 | |
| 992 #ifdef USE_FULL_ASSERT | |
| 993 | |
| 994 /** | |
| 995 * @brief Reports the name of the source file and the source line number | |
| 996 * where the assert_param error has occurred. | |
| 997 * @param file: pointer to the source file name | |
| 998 * @param line: assert_param error line source number | |
| 999 * @retval None | |
| 1000 */ | |
| 1001 void assert_failed(uint8_t* file, uint32_t line) | |
| 1002 { | |
| 89 | 1003 /* User can add his own implementation to report the file name and line number, |
| 1004 ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ | |
| 38 | 1005 |
| 89 | 1006 /* Infinite loop */ |
| 1007 while (1) | |
| 1008 { | |
| 1009 } | |
| 38 | 1010 } |
| 1011 #endif | |
| 1012 | |
| 1013 /** | |
| 1014 * @} | |
| 1015 */ | |
| 104 | 1016 /** |
| 1017 * @brief This function handles SysTick Handler. | |
| 1018 * @param None | |
| 1019 * @retval None | |
| 1020 */ | |
| 38 | 1021 |
| 104 | 1022 /*TxRx only here. Every 100 ms.*/ |
| 1023 uint8_t ticks100ms=0; | |
| 1024 void SysTick_Handler(void) | |
| 1025 { | |
| 1026 HAL_IncTick(); | |
| 1027 if(ticks100ms<100){ | |
| 1028 ticks100ms++; | |
| 1029 }else | |
| 1030 { | |
| 1031 ticks100ms=0; | |
| 1032 } | |
| 1033 } | |
| 38 | 1034 /** |
| 1035 * @} | |
| 1036 */ | |
| 1037 | |
| 1038 /************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/ |