Mercurial > public > ostc4
annotate Discovery/Src/base.c @ 876:5b325372db4b Evo_2_23 tip
Minor: Enable CO2-Sensor as default now
also enable voltage display in addition to %-Battery
author | heinrichsweikamp |
---|---|
date | Fri, 16 Aug 2024 16:17:51 +0200 |
parents | 17d9d6eddd8d |
children |
rev | line source |
---|---|
38 | 1 /////////////////////////////////////////////////////////////////////////////// |
2 /// -*- coding: UTF-8 -*- | |
3 /// | |
4 /// \file Discovery/Src/base.c | |
5 /// \brief main(): init hardware, IRQs and start sub-systems | |
6 /// \author heinrichs weikamp gmbh | |
7 /// \date 26-February-2014 | |
8 /// | |
9 /// $Id$ | |
10 /////////////////////////////////////////////////////////////////////////////// | |
11 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh | |
12 /// | |
13 /// This program is free software: you can redistribute it and/or modify | |
14 /// it under the terms of the GNU General Public License as published by | |
15 /// the Free Software Foundation, either version 3 of the License, or | |
16 /// (at your option) any later version. | |
17 /// | |
18 /// This program is distributed in the hope that it will be useful, | |
19 /// but WITHOUT ANY WARRANTY; without even the implied warranty of | |
20 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
21 /// GNU General Public License for more details. | |
22 /// | |
23 /// You should have received a copy of the GNU General Public License | |
24 /// along with this program. If not, see <http://www.gnu.org/licenses/>. | |
25 ////////////////////////////////////////////////////////////////////////////// | |
26 | |
27 /** | |
28 @verbatim | |
29 ============================================================================== | |
30 ##### Firmware Info ##### | |
31 ============================================================================== | |
32 [..] In settings.c including text and magic stuff | |
33 ============================================================================== | |
34 ##### IRQs ##### | |
35 ============================================================================== | |
36 [..] The IRQs are very important and most functions should only run there. | |
37 | |
38 PreemptPriority are as follows | |
39 (#) 2 (low) sprintf _only_ here. Don't use in maintask or anywhere else. | |
40 Called by Buttons und Timer3 | |
41 Timer3 is 1/10 second | |
42 (#) 1 (mid) anything that should work while in IRQ2 like HalDelay(), VSYNC | |
43 and DMA2D Transfer Complete for housekeepingFrame(); | |
44 (#) 0 (high) _very very short_ interrupts like The HAL hardware part for | |
45 spi, uart, i2c. | |
46 | |
47 SubPriority within PreemptPriority give the order to execute. | |
48 Introduced 30.Oct.14 as it used by several HAL examples. | |
49 Three levelAmbients are available (2 low,1 mid,0 high) | |
50 | |
51 The STM32F4 has 4bits for IRQ levelAmbients, divided 2/2 in this code | |
52 with the NVIC_PRIORITYGROUP_2 setting. | |
53 | |
54 ============================================================================== | |
55 ##### MainTask ##### | |
56 ============================================================================== | |
57 [..] For everthing slow without importance to be 'in time'. | |
58 Like VPM and Buehlmann. | |
59 No sprintf and probably no GFX_SetFramesTopBottom() stuff neither. | |
60 If sprintf is called while sprintf is executed it blows up everything. | |
61 | |
62 ============================================================================== | |
63 ##### Frames / the external SDRAM ##### | |
64 ============================================================================== | |
65 [..] The SDRAM is handled by getFrame() and releaseFrame(). | |
66 Each frame with 800*480*2 Bytes. | |
67 Be carefull to release every frame | |
68 otherwise there will be a memory leakage over time. | |
69 housekeepingFrame() in the MainTask takes care of cleaning the frames. | |
70 All frames are filled with 0x00. This will be transparent with color of | |
71 CLUT_Font020 (is CLUT 0) if the alpha is set for a 16bit pair. | |
72 housekeepingFrame() delays the cleaning of frames still used as screen | |
73 buffer to prevent flickering. | |
74 | |
75 [..] use global variable frameCounter[] in gfxengine.c to control memory | |
76 all but the last three are identical to caller_id | |
77 for example 0x05 are the menu frames | |
78 the last but one is a sum for higher numbers (shouldn't be any) | |
79 the last but one are those in status RELEASED | |
80 the last are those CLEAR (as of 151202 down to 4 in logbook mode) | |
81 | |
82 [..] 4 pages are used for two double memories for screenshots (since Nov. 15) | |
83 | |
84 ============================================================================== | |
85 ##### Display ##### | |
86 ============================================================================== | |
87 [..] There is a Top layer, Bottom layer and background color. | |
88 All are perfectly alpha-blended by hardware. | |
89 | |
90 (#) top layer has 800x480 option function calls only | |
91 as it is not used for cursors here | |
92 (#) bottom layer has free size and start option to be used | |
93 for cursors (or sprites in the future ;-) | |
94 (#) background only black in the moment. | |
95 ToDo: Could be anything else for warnings etc. | |
96 if needed | |
97 | |
98 [..] Frame updates, switching and cursors is done with | |
99 | |
100 (#) GFX_SetFramesTopBottom() and the subset | |
101 GFX_SetFrameTop() + GFX_SetFrameBottom() | |
102 Those do not change anything on the display but give commands to.. | |
103 (#) GFX_change_LTDC() The only place that changes the pointer. | |
104 This prevents erratic behaviour if several changes | |
105 are made within one refresh rate of the screen. | |
106 Is called in IRQ by PD4 and HAL_GPIO_EXTI_IRQHandler | |
107 from VSYNC signal. | |
108 | |
109 [..] Content | |
110 | |
111 (#) Colors by LookupTable only. This could be modified by | |
112 system settings in the future. (gfx_color.h/.c) | |
113 | |
114 (#) Text by text_multilinguage.h/.c with one char | |
115 necessary only starting from '\x80' | |
116 with automatic language switch by | |
117 selected_language in SSettings | |
118 see openEdit_Language() in tMenuEditSystem.c | |
119 Therefore there are differnent functions | |
120 for example: | |
121 write_label_fix() for single char multilanguage | |
122 write_label_var() for strings that could include | |
123 multilanguage as well | |
124 see GFX_write_string() to get an overview of the controls | |
125 as well as the command list in gfx_engine.h | |
126 There is no clear before writing, text overlay is always on. | |
127 Many options to have LargeFont.SmallFont for numbers etc. | |
128 | |
129 ============================================================================== | |
130 ##### Update, DualBoot and build-in FLASH memory usage ##### | |
131 ============================================================================== | |
132 [..] Boot0 pin, Boot1/PB2 pin and BFB2 software bit control the behaviour. | |
133 PB2 should be tied to GND. | |
134 Boot0 == VDD -> bootloader on start, otherwise boot from Bank1 or Bank2 | |
135 depending on BFB2. | |
136 Bank2 contains the Fonts and should contain a proper test code in future | |
137 Bank1 is the main code (Bank1 is 1 MB too, usage as of Oct. 14 is 200 KB) | |
138 [..] Bootloader should be either UART or USB (on FS pins _only_) | |
139 USB HS to FS like on the Eval board does not work. | |
140 [..] Bootloader for the smaller CPU2 is implemented via the SPI used for DMA copy. | |
141 | |
142 ============================================================================== | |
143 ##### Connection to CPU2 (STM32F411 as of Oct.14 ##### | |
144 ============================================================================== | |
145 [..] Connected via SPI and DMA for every purpose. | |
146 two entire arrays are transfered for data security reasons | |
147 with respect to master (STM32F429) might interrupt internal | |
148 data copy in CPU2 (like hi byte, low byte, etc.). | |
149 [..] The entire life data is calculated in CPU2. Like tissues, CNS,... | |
150 Therefore the main unit is _not_ necessarily a Real Time system. | |
151 Simulation on the main unit can be executed without disrupting life data. | |
152 [..] SPI is triggered and timed by calling DataEX_call() in data_exchange_main.c | |
153 DataEX_copy_to_LifeData() does the transfer from buffer to variables used. | |
154 | |
155 ============================================================================== | |
156 ##### Menu, MenuEdit, Info ##### | |
157 ============================================================================== | |
158 [..] tMenu.c, tMenuEdit.c and tInfo.c is the system used. | |
159 logbook is part of Info not Menu. | |
160 The Info Menu is accessed by button 'Back' | |
161 The regular Menu is accessed by button 'Enter' | |
162 [..] Menu content is kept in frame memory for fast access. | |
163 There is no need to build pages if the 'Enter' button is pressed. | |
164 This is in contrast to MenuEdit pages. | |
165 [..] Button control for new pages (and pages in general) have to implemented | |
166 in tMenu.c, tMenuEdit.c or tInfo.c | |
167 | |
168 [..] ToDo (Oct. 14) Timeout for menus via Timer3 / IRQ 2 | |
169 | |
170 ============================================================================== | |
171 ##### settings ##### | |
172 ============================================================================== | |
173 [..] files: settings.c, settings.h | |
174 1. adjust struct SSettings in settings.h | |
175 2. adjust const SSettings SettingsStandard in settings.c | |
176 3. adjust set_new_settings_missing_in_ext_flash() | |
177 4. adjust check_and_correct_settings() IMPORTANT as it changes values! | |
178 | |
179 ============================================================================== | |
180 ##### specials ##### | |
181 ============================================================================== | |
182 [..] There was code for vector graphics from great demos | |
183 (peridiummmm and jupiter) that can be fitted again | |
184 | |
185 ============================================================================== | |
186 ##### ppO2 sensors ##### | |
187 ============================================================================== | |
188 [..] in tCCR.c is function get_ppO2SensorWeightedResult_cbar(); | |
189 | |
190 @endverbatim | |
191 ****************************************************************************** | |
192 * @attention | |
193 * | |
194 * <h2><center>© COPYRIGHT(c) 2014 heinrichs weikamp</center></h2> | |
195 * | |
196 ****************************************************************************** | |
197 */ | |
198 | |
199 /* Includes ------------------------------------------------------------------*/ | |
200 #include "stdio.h" | |
201 #include <string.h> // for memcopy | |
549
469e93f8633e
Only execute motion detection functions if features is enabled:
Ideenmodellierer
parents:
540
diff
changeset
|
202 #include <math.h> |
446
f1257a32f2d4
Introduced configuration header for variant managment:
ideenmodellierer
parents:
427
diff
changeset
|
203 #include "configuration.h" |
38 | 204 |
205 #include "stm32f4xx_hal.h" | |
206 #include "ostc.h" | |
207 #include "base.h" | |
208 #include "display.h" | |
209 #include "gfx_engine.h" | |
210 #include "show_logbook.h" | |
211 #include "text_multilanguage.h" | |
212 #include "tHome.h" | |
213 #include "tInfo.h" | |
214 #include "tInfoLog.h" | |
718
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
215 #include "tInfoSensor.h" |
845 | 216 #include "tInfoPreDive.h" |
38 | 217 #include "tMenu.h" |
218 #include "tMenuEdit.h" | |
219 #include "tMenuEditGasOC.h" | |
220 #include "tStructure.h" | |
221 #include "externLogbookFlash.h" | |
222 #include "tComm.h" | |
223 #include "tCCR.h" | |
224 #include "data_exchange.h" | |
225 #include "data_exchange_main.h" | |
226 #include "vpm.h" | |
227 #include "buehlmann.h" | |
228 #include "logbook.h" | |
229 #include "check_warning.h" | |
230 #include "simulation.h" | |
231 #include "decom.h" | |
232 #include "timer.h" | |
233 #include "logbook_miniLive.h" | |
234 #include "test_vpm.h" | |
235 #include "tDebug.h" | |
360
fc5e9fdcb156
Added trigger of middle button action in case of a detected shake
ideenmodellierer
parents:
272
diff
changeset
|
236 #include "motion.h" |
586
bb5ce239741f
Motion control: Jump back to primary view if focus is lost:
Ideenmodellierer
parents:
561
diff
changeset
|
237 #include "t7.h" |
bb5ce239741f
Motion control: Jump back to primary view if focus is lost:
Ideenmodellierer
parents:
561
diff
changeset
|
238 #include "t3.h" |
651 | 239 #include "tMenuEditSetpoint.h" |
38 | 240 |
241 #ifdef DEMOMODE | |
242 #include "demo.h" | |
243 static void TIM_DEMO_init(void); | |
244 #endif | |
245 | |
361
b111fc4250e9
Pass action to customer vie update function.
Ideenmodellierer
parents:
360
diff
changeset
|
246 |
38 | 247 //#include "lodepng.h" |
248 //#include <stdlib.h> // for malloc and free | |
249 | |
250 /** @addtogroup OSTC 4 | |
251 * @{ | |
252 */ | |
253 | |
254 /* Private typedef -----------------------------------------------------------*/ | |
255 | |
256 //#define NO_TIMEOUT | |
257 //#define QUICK_SLEEP | |
258 | |
259 /* Private define ------------------------------------------------------------*/ | |
260 #define REFRESH_COUNT ((uint32_t)0x0569) /**< for SDRAM refresh counter (90Mhz SD clock) */ | |
152
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
261 #define INVALID_BUTTON ((uint8_t) 0xFF) |
38 | 262 /* Private macro -------------------------------------------------------------*/ |
263 /* Private variables ---------------------------------------------------------*/ | |
264 | |
300
5ca177d2df5d
cleanup: remove commented/unused code, make static
Jan Mulder <jlmulder@xs4all.nl>
parents:
272
diff
changeset
|
265 static RTC_HandleTypeDef RtcHandle; /* used to change time and date, no RTC is running on this MCU */ |
38 | 266 TIM_HandleTypeDef TimHandle; /* used in stm32f4xx_it.c too */ |
300
5ca177d2df5d
cleanup: remove commented/unused code, make static
Jan Mulder <jlmulder@xs4all.nl>
parents:
272
diff
changeset
|
267 static TIM_HandleTypeDef TimBacklightHandle; |
225
2bb1db22b5f5
cleanup: random set of cleanups
Jan Mulder <jlmulder@xs4all.nl>
parents:
223
diff
changeset
|
268 #ifdef DEMOMODE |
38 | 269 TIM_HandleTypeDef TimDemoHandle; /* used in stm32f4xx_it.c too */ |
225
2bb1db22b5f5
cleanup: random set of cleanups
Jan Mulder <jlmulder@xs4all.nl>
parents:
223
diff
changeset
|
270 #endif |
38 | 271 |
549
469e93f8633e
Only execute motion detection functions if features is enabled:
Ideenmodellierer
parents:
540
diff
changeset
|
272 |
469e93f8633e
Only execute motion detection functions if features is enabled:
Ideenmodellierer
parents:
540
diff
changeset
|
273 static uint8_t blBoost = 0; |
422
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
274 static uint8_t RequestModeChange = 0; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
275 |
697 | 276 static uint8_t LastButtonPressed = INVALID_BUTTON; |
277 static uint32_t LastButtonPressedTick = 0; | |
300
5ca177d2df5d
cleanup: remove commented/unused code, make static
Jan Mulder <jlmulder@xs4all.nl>
parents:
272
diff
changeset
|
278 static uint32_t BaseTick100ms; /* Tick at last 100ms cycle */ |
38 | 279 |
280 /* SDRAM handler declaration */ | |
300
5ca177d2df5d
cleanup: remove commented/unused code, make static
Jan Mulder <jlmulder@xs4all.nl>
parents:
272
diff
changeset
|
281 static SDRAM_HandleTypeDef hsdram; |
5ca177d2df5d
cleanup: remove commented/unused code, make static
Jan Mulder <jlmulder@xs4all.nl>
parents:
272
diff
changeset
|
282 static FMC_SDRAM_TimingTypeDef SDRAM_Timing; |
5ca177d2df5d
cleanup: remove commented/unused code, make static
Jan Mulder <jlmulder@xs4all.nl>
parents:
272
diff
changeset
|
283 static FMC_SDRAM_CommandTypeDef command; |
38 | 284 |
285 /* This was used for Dual Boot */ | |
286 //FLASH_OBProgramInitTypeDef OBInit; | |
287 //FLASH_AdvOBProgramInitTypeDef AdvOBInit; | |
288 | |
289 /* Private variables with external access ------------------------------------*/ | |
290 | |
300
5ca177d2df5d
cleanup: remove commented/unused code, make static
Jan Mulder <jlmulder@xs4all.nl>
parents:
272
diff
changeset
|
291 static uint32_t globalStateID = 0; |
5ca177d2df5d
cleanup: remove commented/unused code, make static
Jan Mulder <jlmulder@xs4all.nl>
parents:
272
diff
changeset
|
292 static uint32_t time_without_button_pressed_deciseconds = 0; /**< langbeschreibung (eigenes Feld) warum diese variable verwendet wird um den sleepmode zu aktivieren */ |
38 | 293 uint8_t bootToBootloader = 0; ///< set in tComm.c to install firmware updates, calls resetToFirmwareUpdate() |
300
5ca177d2df5d
cleanup: remove commented/unused code, make static
Jan Mulder <jlmulder@xs4all.nl>
parents:
272
diff
changeset
|
294 static uint8_t returnFromCommCleanUpRequest = 0; ///< use this to exit bluetooth mode and call tComm_exit() |
38 | 295 uint32_t base_tempLightLevel = 0; |
300
5ca177d2df5d
cleanup: remove commented/unused code, make static
Jan Mulder <jlmulder@xs4all.nl>
parents:
272
diff
changeset
|
296 static uint8_t wasFirmwareUpdateCheckBattery = 0; |
740
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
297 static uint8_t DoDisplayRefresh = 0; /* trigger to refresh display data */ |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
298 static uint8_t DoHousekeeping = 0; /* trigger to cleanup the frame buffers */ |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
299 static SButtonLock ButtonLockState = LOCK_OFF; /* Used for button unlock sequence */ |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
300 |
217
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
301 |
38 | 302 /* Private function prototypes -----------------------------------------------*/ |
303 static void SystemClock_Config(void); | |
304 static void Error_Handler(void); | |
305 static void SDRAM_Initialization_Sequence(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command); | |
306 static void SDRAM_Config(void); | |
307 static void EXTILine_Buttons_Config(void); | |
308 static void TIM_init(void); | |
309 static void TIM_BACKLIGHT_init(void); | |
310 static uint32_t TIM_BACKLIGHT_adjust(void); | |
311 static void gotoSleep(void); | |
312 static void deco_loop(void); | |
313 static void resetToFirmwareUpdate(void); | |
217
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
314 static void TriggerButtonAction(void); |
740
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
315 static void TriggerButtonUnlock(void); |
217
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
316 static void EvaluateButton(void); |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
317 static void RefreshDisplay(void); |
422
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
318 static void TimeoutControlRequestModechange(void); |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
319 static void TimeoutControl(void); |
38 | 320 |
321 /* ITM Trace-------- ---------------------------------------------------------*/ | |
322 /* | |
323 #define ITM_Port8(n) (*((volatile unsigned char *)(0xE0000000+4*n))) | |
324 #define ITM_Port16(n) (*((volatile unsigned short*)(0xE0000000+4*n))) | |
325 #define ITM_Port32(n) (*((volatile unsigned long *)(0xE0000000+4*n))) | |
326 | |
327 #define DEMCR (*((volatile unsigned long *)(0xE000EDFC))) | |
328 #define TRCENA 0x01000000 | |
329 | |
330 struct __FILE { int handle; }; | |
331 FILE __stdout; | |
332 FILE __stdin; | |
333 | |
334 int fputc(int ch, FILE *f) { | |
335 if (DEMCR & TRCENA) { | |
336 while (ITM_Port32(0) == 0); | |
337 ITM_Port8(0) = ch; | |
338 } | |
339 return(ch); | |
340 } | |
341 */ | |
360
fc5e9fdcb156
Added trigger of middle button action in case of a detected shake
ideenmodellierer
parents:
272
diff
changeset
|
342 static uint8_t ButtonAction = ACTION_END; |
fc5e9fdcb156
Added trigger of middle button action in case of a detected shake
ideenmodellierer
parents:
272
diff
changeset
|
343 |
611
916998f90e39
Suspend MotionDetection events while diver is operationg the OSTC:
Ideenmodellierer
parents:
597
diff
changeset
|
344 void StoreButtonAction(uint8_t action) |
360
fc5e9fdcb156
Added trigger of middle button action in case of a detected shake
ideenmodellierer
parents:
272
diff
changeset
|
345 { |
fc5e9fdcb156
Added trigger of middle button action in case of a detected shake
ideenmodellierer
parents:
272
diff
changeset
|
346 ButtonAction = action; |
fc5e9fdcb156
Added trigger of middle button action in case of a detected shake
ideenmodellierer
parents:
272
diff
changeset
|
347 } |
fc5e9fdcb156
Added trigger of middle button action in case of a detected shake
ideenmodellierer
parents:
272
diff
changeset
|
348 |
38 | 349 // =============================================================================== |
350 // main | |
351 /// @brief This function makes initializations and has the nonIRQ endless loop | |
352 /// for bluetooth and deco calculations | |
353 /// | |
354 // =============================================================================== | |
355 int main(void) | |
356 { | |
357 uint32_t pLayerInvisible; | |
358 uint16_t totalDiveCounterFound; | |
116 | 359 |
407
b11e50415982
Bugfix parallel call of external flash functions:
ideenmodellierer
parents:
395
diff
changeset
|
360 SStateList status; |
611
916998f90e39
Suspend MotionDetection events while diver is operationg the OSTC:
Ideenmodellierer
parents:
597
diff
changeset
|
361 |
38 | 362 set_globalState( StBoot0 ); |
152
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
363 LastButtonPressed = 0; |
38 | 364 |
365 HAL_Init(); | |
366 HAL_NVIC_SetPriorityGrouping( NVIC_PRIORITYGROUP_2 ); | |
367 | |
368 SystemClock_Config(); | |
369 | |
370 MX_GPIO_Init(); | |
371 // MX_SmallCPU_NO_Reset_Helper(); //161116 hw | |
395
eb7696e0510f
Added start of module configuration after eache modul power on
ideenmodellierer
parents:
384
diff
changeset
|
372 MX_Bluetooth_PowerOff(); /* disable module, needed in case of e.g. a reset event to make sure module is configured from scratch */ |
38 | 373 MX_SPI_Init(); |
374 MX_UART_Init(); | |
375 SDRAM_Config(); | |
376 HAL_Delay( 100 ); | |
116 | 377 |
378 stateRealGetPointerWrite()->lastKnownBatteryPercentage = 0; // damit das nicht in settings kopiert wird. | |
379 set_settings_to_Standard(); | |
380 mod_settings_for_first_start_with_empty_ext_flash(); | |
381 ext_flash_read_settings(); | |
382 if( newFirmwareVersionCheckViaSettings() ) // test for old firmware version in loaded settings | |
383 { | |
384 wasFirmwareUpdateCheckBattery = 1; | |
765
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
745
diff
changeset
|
385 set_settings_button_to_factory_with_individual_buttonBalance(); // will adapt individual values |
116 | 386 } |
387 //settingsGetPointer()->bluetoothActive = 0; /* MX_Bluetooth_PowerOff(); unnecessary as part of MX_GPIO_Init() */ | |
388 //settingsGetPointer()->compassBearing = 0; | |
300
5ca177d2df5d
cleanup: remove commented/unused code, make static
Jan Mulder <jlmulder@xs4all.nl>
parents:
272
diff
changeset
|
389 set_new_settings_missing_in_ext_flash(); // includes update of firmware version 161121 |
116 | 390 |
38 | 391 GFX_init( &pLayerInvisible ); |
392 TIM_BACKLIGHT_init(); | |
393 | |
394 // new 170508: bluetooth on at start | |
395 settingsGetPointer()->bluetoothActive = 1; | |
396 MX_Bluetooth_PowerOn(); | |
395
eb7696e0510f
Added start of module configuration after eache modul power on
ideenmodellierer
parents:
384
diff
changeset
|
397 tComm_StartBlueModConfig(); |
38 | 398 |
399 /* | |
400 if( (hardwareDataGetPointer()->primarySerial == 20+18) | |
401 || (hardwareDataGetPointer()->primarySerial == 20+25) | |
402 || (hardwareDataGetPointer()->primarySerial == 20+27)) | |
403 { | |
404 MX_Bluetooth_PowerOn(); | |
405 tComm_Set_Bluetooth_Name(1); | |
406 } | |
407 */ | |
408 errorsInSettings = check_and_correct_settings(); | |
409 createDiveSettings(); | |
410 | |
411 #ifdef QUICK_SLEEP | |
412 settingsGetPointer()->timeoutSurfacemode = 20; | |
413 #else | |
414 settingsGetPointer()->timeoutSurfacemode = 120; | |
415 #endif | |
416 | |
417 #ifdef DEMOMODE | |
418 demoConfigureSettings(); | |
419 TIM_DEMO_init(); | |
420 #endif | |
421 | |
422 // ----------------------------- | |
423 | |
424 display_power_on__1_of_2__pre_RGB(); | |
425 GFX_LTDC_Init(); | |
426 GFX_LTDC_LayerDefaultInit( TOP_LAYER, pLayerInvisible ); | |
427 GFX_LTDC_LayerDefaultInit( BACKGRD_LAYER, pLayerInvisible ); | |
428 GFX_SetFramesTopBottom( pLayerInvisible, pLayerInvisible, 480 ); | |
429 HAL_Delay( 20 ); | |
430 display_power_on__2_of_2__post_RGB(); | |
431 GFX_use_colorscheme( settingsGetPointer()->tX_colorscheme ); | |
432 | |
433 tHome_init(); | |
434 tI_init(); | |
435 tM_init(); | |
436 tMenuEdit_init(); | |
437 tInfoLog_init(); | |
438 tComm_init(); | |
439 DataEX_init(); | |
476
19cff811616d
Balance value of button responsitivness were not considered during firmware startup:
ideenmodellierer
parents:
447
diff
changeset
|
440 settingsHelperButtonSens_keepPercentageValues(settingsGetPointer()->ButtonResponsiveness[3], settingsGetPointer()->ButtonResponsiveness); |
38 | 441 setButtonResponsiveness( settingsGetPointer()->ButtonResponsiveness ); |
442 set_globalState_tHome(); | |
443 | |
444 GFX_start_VSYNC_IRQ(); | |
445 tCCR_init(); | |
446 | |
447 GFX_logoAutoOff(); | |
448 EXTILine_Buttons_Config(); | |
449 | |
447
adc4ccbebbb5
Added compile switch var firmware variant which does trust the memory log => does not check the log consistency at startu (used for test purpose)
ideenmodellierer
parents:
446
diff
changeset
|
450 #ifdef TRUST_LOG_CONSISTENCY |
adc4ccbebbb5
Added compile switch var firmware variant which does trust the memory log => does not check the log consistency at startu (used for test purpose)
ideenmodellierer
parents:
446
diff
changeset
|
451 if(!ext_dive_log_consistent()) /* only repair log if an invalid entry was detected */ |
adc4ccbebbb5
Added compile switch var firmware variant which does trust the memory log => does not check the log consistency at startu (used for test purpose)
ideenmodellierer
parents:
446
diff
changeset
|
452 { |
adc4ccbebbb5
Added compile switch var firmware variant which does trust the memory log => does not check the log consistency at startu (used for test purpose)
ideenmodellierer
parents:
446
diff
changeset
|
453 ext_flash_repair_dive_log(); |
adc4ccbebbb5
Added compile switch var firmware variant which does trust the memory log => does not check the log consistency at startu (used for test purpose)
ideenmodellierer
parents:
446
diff
changeset
|
454 } |
adc4ccbebbb5
Added compile switch var firmware variant which does trust the memory log => does not check the log consistency at startu (used for test purpose)
ideenmodellierer
parents:
446
diff
changeset
|
455 |
adc4ccbebbb5
Added compile switch var firmware variant which does trust the memory log => does not check the log consistency at startu (used for test purpose)
ideenmodellierer
parents:
446
diff
changeset
|
456 #else /* always check and repair log */ |
38 | 457 ext_flash_repair_dive_log(); |
458 //ext_flash_repair_SPECIAL_dive_numbers_starting_count_with(1); | |
447
adc4ccbebbb5
Added compile switch var firmware variant which does trust the memory log => does not check the log consistency at startu (used for test purpose)
ideenmodellierer
parents:
446
diff
changeset
|
459 #endif |
38 | 460 totalDiveCounterFound = logbook_lastDive_diveNumber(); |
461 if( settingsGetPointer()->totalDiveCounter < totalDiveCounterFound ) | |
462 settingsGetPointer()->totalDiveCounter = totalDiveCounterFound; | |
463 | |
464 if( settingsGetPointer()->debugModeOnStart ) | |
465 { | |
466 settingsGetPointer()->debugModeOnStart = 0; | |
427 | 467 ext_flash_write_settings(0); |
38 | 468 setDebugMode(); |
469 openInfo( StIDEBUG ); | |
470 } | |
368
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
367
diff
changeset
|
471 InitMotionDetection(); |
38 | 472 |
263
a6c0375bc950
Forward 100ms time stamp to RTE and handle logbook in main loop
ideenmodellierer
parents:
250
diff
changeset
|
473 TIM_init(); /* start cylic 100ms task */ |
a6c0375bc950
Forward 100ms time stamp to RTE and handle logbook in main loop
ideenmodellierer
parents:
250
diff
changeset
|
474 |
740
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
475 if( settingsGetPointer()->buttonLockActive ) |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
476 { |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
477 ButtonLockState = LOCK_FIRST_PRESS; |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
478 } |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
479 |
38 | 480 /* @brief main LOOP |
481 * | |
482 * this is executed while no IRQ interrupts it | |
483 * - deco calculation | |
484 * - bluetooth | |
485 * and resetToFirmwareUpdate() | |
486 * because tComm_control() does not exit before disconnection | |
487 */ | |
488 while( 1 ) | |
489 { | |
490 if( bootToBootloader ) | |
491 resetToFirmwareUpdate(); | |
492 | |
493 tCCR_control(); | |
494 if( tComm_control() )// will stop while loop if tComm Mode started until exit from UART | |
495 { | |
496 createDiveSettings(); | |
497 updateMenu(); | |
427 | 498 ext_flash_write_settings(0); |
38 | 499 } |
407
b11e50415982
Bugfix parallel call of external flash functions:
ideenmodellierer
parents:
395
diff
changeset
|
500 |
b11e50415982
Bugfix parallel call of external flash functions:
ideenmodellierer
parents:
395
diff
changeset
|
501 /* check if tasks depending on global state are pending */ |
b11e50415982
Bugfix parallel call of external flash functions:
ideenmodellierer
parents:
395
diff
changeset
|
502 get_globalStateList(&status); |
b11e50415982
Bugfix parallel call of external flash functions:
ideenmodellierer
parents:
395
diff
changeset
|
503 if(status.base == BaseHome) |
b11e50415982
Bugfix parallel call of external flash functions:
ideenmodellierer
parents:
395
diff
changeset
|
504 { |
427 | 505 tMenuEdit_writeSettingsToFlash(); |
407
b11e50415982
Bugfix parallel call of external flash functions:
ideenmodellierer
parents:
395
diff
changeset
|
506 } |
b11e50415982
Bugfix parallel call of external flash functions:
ideenmodellierer
parents:
395
diff
changeset
|
507 |
b11e50415982
Bugfix parallel call of external flash functions:
ideenmodellierer
parents:
395
diff
changeset
|
508 DataEX_merge_devicedata(); /* data is exchanged at startup and every 10 minutes => check if something changed */ |
b11e50415982
Bugfix parallel call of external flash functions:
ideenmodellierer
parents:
395
diff
changeset
|
509 |
38 | 510 deco_loop(); |
740
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
511 if((ButtonLockState) && (stateUsed->mode == MODE_SURFACE)) |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
512 { |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
513 TriggerButtonUnlock(); |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
514 } |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
515 else |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
516 { |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
517 TriggerButtonAction(); |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
518 } |
623 | 519 if(DoHousekeeping) |
520 { | |
521 DoHousekeeping = housekeepingFrame(); | |
522 } | |
395
eb7696e0510f
Added start of module configuration after eache modul power on
ideenmodellierer
parents:
384
diff
changeset
|
523 if(DoDisplayRefresh) /* set every 100ms by timer interrupt */ |
217
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
524 { |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
525 DoDisplayRefresh = 0; |
615
556df4a8f418
Moved non critical functions from timer interrupt to main loop:
Ideenmodellierer
parents:
611
diff
changeset
|
526 |
662 | 527 updateSetpointStateUsed(); |
615
556df4a8f418
Moved non critical functions from timer interrupt to main loop:
Ideenmodellierer
parents:
611
diff
changeset
|
528 if(stateUsed == stateSimGetPointer()) |
556df4a8f418
Moved non critical functions from timer interrupt to main loop:
Ideenmodellierer
parents:
611
diff
changeset
|
529 { |
556df4a8f418
Moved non critical functions from timer interrupt to main loop:
Ideenmodellierer
parents:
611
diff
changeset
|
530 simulation_UpdateLifeData(1); |
556df4a8f418
Moved non critical functions from timer interrupt to main loop:
Ideenmodellierer
parents:
611
diff
changeset
|
531 } |
556df4a8f418
Moved non critical functions from timer interrupt to main loop:
Ideenmodellierer
parents:
611
diff
changeset
|
532 check_warning(); |
556df4a8f418
Moved non critical functions from timer interrupt to main loop:
Ideenmodellierer
parents:
611
diff
changeset
|
533 updateMiniLiveLogbook(1); |
556df4a8f418
Moved non critical functions from timer interrupt to main loop:
Ideenmodellierer
parents:
611
diff
changeset
|
534 |
217
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
535 RefreshDisplay(); |
623 | 536 TimeoutControl(); /* exit menus if needed */ |
422
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
537 |
549
469e93f8633e
Only execute motion detection functions if features is enabled:
Ideenmodellierer
parents:
540
diff
changeset
|
538 #ifdef ENABLE_MOTION_CONTROL |
469e93f8633e
Only execute motion detection functions if features is enabled:
Ideenmodellierer
parents:
540
diff
changeset
|
539 if((stateUsed->mode == MODE_DIVE) && (settingsGetPointer()->MotionDetection != MOTION_DETECT_OFF)) /* handle motion events in divemode only */ |
368
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
367
diff
changeset
|
540 { |
611
916998f90e39
Suspend MotionDetection events while diver is operationg the OSTC:
Ideenmodellierer
parents:
597
diff
changeset
|
541 if(get_globalState() != StD) |
549
469e93f8633e
Only execute motion detection functions if features is enabled:
Ideenmodellierer
parents:
540
diff
changeset
|
542 { |
642
c737cf5d9067
Do not show focus indicator in case motion detection is suspended:
Ideenmodellierer
parents:
625
diff
changeset
|
543 suspendMotionDetection(10); /* do not change custom views while divers is operating the computer */ |
611
916998f90e39
Suspend MotionDetection events while diver is operationg the OSTC:
Ideenmodellierer
parents:
597
diff
changeset
|
544 } |
916998f90e39
Suspend MotionDetection events while diver is operationg the OSTC:
Ideenmodellierer
parents:
597
diff
changeset
|
545 HandleMotionDetection(); |
368
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
367
diff
changeset
|
546 } |
549
469e93f8633e
Only execute motion detection functions if features is enabled:
Ideenmodellierer
parents:
540
diff
changeset
|
547 #endif |
835 | 548 /* Autofocus for T3 view */ |
549 if((settingsGetPointer()->cvAutofocus) && (settingsGetPointer()->design == 3) && (get_globalState() == StD) && (stateUsed->mode == MODE_DIVE)) | |
550 { | |
551 t3_handleAutofocus(); | |
552 } | |
272
74a8296a2318
cleanup: simplify stateUsed usage
Jan Mulder <jlmulder@xs4all.nl>
parents:
270
diff
changeset
|
553 #ifdef SIM_WRITES_LOGBOOK |
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
263
diff
changeset
|
554 if(stateUsed == stateSimGetPointer()) |
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
263
diff
changeset
|
555 logbook_InitAndWrite(stateUsed); |
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
263
diff
changeset
|
556 #endif |
263
a6c0375bc950
Forward 100ms time stamp to RTE and handle logbook in main loop
ideenmodellierer
parents:
250
diff
changeset
|
557 if(stateUsed == stateRealGetPointer()) /* Handle log entries while in dive mode*/ |
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
263
diff
changeset
|
558 logbook_InitAndWrite(stateUsed); |
217
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
559 } |
38 | 560 } |
561 } | |
562 | |
360
fc5e9fdcb156
Added trigger of middle button action in case of a detected shake
ideenmodellierer
parents:
272
diff
changeset
|
563 |
fc5e9fdcb156
Added trigger of middle button action in case of a detected shake
ideenmodellierer
parents:
272
diff
changeset
|
564 |
fc5e9fdcb156
Added trigger of middle button action in case of a detected shake
ideenmodellierer
parents:
272
diff
changeset
|
565 |
38 | 566 // =============================================================================== |
567 // timer IRQ | |
568 /// @brief this is called periodically | |
569 /// | |
570 /// - refresh screen (the actual change is done in the VSYNC IRQ) | |
571 /// - start data transfer with RTE / small CPU (DateEX....) | |
572 /// - update logbook | |
573 /// - timeouts | |
574 /// .... | |
575 /// | |
576 /// all this in three steps / switch() routines in a given order | |
577 /// as the previous switch() might influence the next functions | |
578 /// to be called | |
579 /// | |
580 // =============================================================================== | |
348 | 581 |
582 //#define NO_TIMEOUT | |
38 | 583 void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) |
584 { | |
585 #ifdef DEMOMODE | |
586 if(htim->Instance==TIM7) | |
587 { | |
588 HAL_GPIO_EXTI_Callback(demoGetCommand()); | |
589 return; | |
590 } | |
591 #endif | |
592 SStateList status; | |
422
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
593 _Bool modeChange = 0; |
263
a6c0375bc950
Forward 100ms time stamp to RTE and handle logbook in main loop
ideenmodellierer
parents:
250
diff
changeset
|
594 |
a6c0375bc950
Forward 100ms time stamp to RTE and handle logbook in main loop
ideenmodellierer
parents:
250
diff
changeset
|
595 BaseTick100ms = HAL_GetTick(); /* store start of 100ms cycle */ |
a6c0375bc950
Forward 100ms time stamp to RTE and handle logbook in main loop
ideenmodellierer
parents:
250
diff
changeset
|
596 |
38 | 597 if(returnFromCommCleanUpRequest) |
598 { | |
599 tComm_exit(); | |
600 returnFromCommCleanUpRequest = 0; | |
601 } | |
602 | |
603 get_globalStateList(&status); | |
604 | |
605 switch(status.base) | |
606 { | |
607 case BaseHome: | |
608 case BaseMenu: | |
609 case BaseInfo: | |
610 DateEx_copy_to_dataOut(); | |
611 DataEX_copy_to_LifeData(&modeChange); | |
612 //foto session :-) stateRealGetPointerWrite()->lifeData.battery_charge = 99; | |
613 //foto session :-) stateSimGetPointerWrite()->lifeData.battery_charge = 99; | |
614 DataEX_copy_to_deco(); | |
132
135eae957389
Add compile switch to disable optimization for specific function
Ideenmodellierer
parents:
116
diff
changeset
|
615 DataEX_call(); |
135eae957389
Add compile switch to disable optimization for specific function
Ideenmodellierer
parents:
116
diff
changeset
|
616 |
38 | 617 timer_UpdateSecond(1); |
132
135eae957389
Add compile switch to disable optimization for specific function
Ideenmodellierer
parents:
116
diff
changeset
|
618 base_tempLightLevel = TIM_BACKLIGHT_adjust(); |
38 | 619 tCCR_tick(); |
620 tHome_tick(); | |
621 break; | |
622 case BaseStop: | |
623 DateEx_copy_to_dataOut(); | |
624 DataEX_call(); | |
625 DataEX_control_connection_while_asking_for_sleep(); | |
626 break; | |
627 default: | |
628 case BaseComm: | |
629 if(get_globalState() == StUART_RTECONNECT) | |
630 { | |
631 DateEx_copy_to_dataOut(); | |
632 DataEX_call(); | |
633 DataEX_copy_to_LifeData(0); | |
634 } | |
635 break; | |
636 } | |
637 | |
422
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
638 get_globalStateList(&status); |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
639 if(modeChange) |
38 | 640 { |
422
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
641 TimeoutControlRequestModechange(); |
38 | 642 } |
217
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
643 if(status.base == BaseComm) /* main loop not serviced in com mode */ |
38 | 644 { |
217
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
645 tComm_refresh(); |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
646 } |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
647 else |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
648 { |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
649 DoDisplayRefresh = 1; |
38 | 650 } |
651 } | |
652 | |
653 | |
654 /* button and VSYNC IRQ | |
655 * | |
656 * VSYNC will switch foreground and background picture | |
657 * if demanded. see GFX_change_LTDC() | |
658 * | |
659 */ | |
660 // =============================================================================== | |
661 // HAL_GPIO_EXTI_Callback | |
662 /// @brief button and VSYNC IRQ | |
663 /// | |
664 /// VSYNC will switch foreground and background picture if demanded - | |
665 /// see GFX_change_LTDC() | |
666 /// | |
667 // =============================================================================== | |
95
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
668 void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) { |
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
669 if (!GPIO_Pin) |
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
670 return; |
38 | 671 |
95
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
672 if (GPIO_Pin == VSYNC_IRQ_PIN) // rechts, unten |
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
673 { |
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
674 GFX_change_LTDC(); |
623 | 675 DoHousekeeping = 1; |
95
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
676 /* |
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
677 #ifdef DEMOMODE |
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
678 static uint8_t countCall = 0; |
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
679 if(countCall++ < 10) |
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
680 return; |
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
681 countCall = 0; |
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
682 uint8_t buttonAction = demoGetCommand(); |
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
683 if(buttonAction) |
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
684 GPIO_Pin = buttonAction; |
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
685 else |
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
686 #endif |
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
687 */ |
697 | 688 |
95
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
689 } |
697 | 690 if((GPIO_Pin == BUTTON_ENTER_PIN) || (GPIO_Pin == BUTTON_NEXT_PIN) || (GPIO_Pin == BUTTON_BACK_PIN)) |
691 { | |
692 LastButtonPressed = GPIO_Pin; | |
693 LastButtonPressedTick = HAL_GetTick(); | |
694 } | |
695 | |
696 EvaluateButton(); | |
38 | 697 |
698 #ifdef DEMOMODE | |
95
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
699 uint8_t demoMachineCall = 0; |
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
700 if(GPIO_Pin & 0x80) |
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
701 { |
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
702 demoMachineCall = 1; |
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
703 GPIO_Pin &= 0x7F; |
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
704 } |
38 | 705 #endif |
152
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
706 } |
38 | 707 |
217
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
708 static void RefreshDisplay() |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
709 { |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
710 SStateList status; |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
711 get_globalStateList(&status); |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
712 switch(status.base) |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
713 { |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
714 case BaseHome: |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
715 tHome_refresh(); |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
716 tM_check_content(); |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
717 break; |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
718 case BaseMenu: |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
719 tM_refresh_live_content(); |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
720 tMenuEdit_refresh_live_content(); |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
721 break; |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
722 case BaseInfo: |
718
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
723 tInfo_refresh(); |
217
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
724 break; |
718
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
725 case BaseComm: /* refresh already done in time callback */ |
217
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
726 break; |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
727 default: |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
728 if(get_globalState() == StStop) |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
729 tHome_sleepmode_fun(); |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
730 break; |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
731 } |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
732 } |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
733 |
740
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
734 static void TriggerButtonUnlock() |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
735 { |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
736 static uint32_t lastInput = 0; |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
737 uint8_t action = ButtonAction; |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
738 |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
739 if(action != ACTION_END) |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
740 { |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
741 if(((time_elapsed_ms(lastInput, HAL_GetTick()) < 2000)) || (ButtonLockState == LOCK_FIRST_PRESS)) |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
742 { |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
743 switch(ButtonLockState) |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
744 { |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
745 case LOCK_FIRST_PRESS: |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
746 case LOCK_1: if(action == ACTION_BUTTON_ENTER) |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
747 { |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
748 ButtonLockState = LOCK_2; |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
749 } |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
750 else |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
751 { |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
752 ButtonLockState = LOCK_1; |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
753 } |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
754 break; |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
755 case LOCK_2: if(action == ACTION_BUTTON_NEXT) |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
756 { |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
757 ButtonLockState = LOCK_3; |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
758 } |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
759 else |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
760 { |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
761 ButtonLockState = LOCK_1; |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
762 } |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
763 break; |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
764 case LOCK_3: if(action == ACTION_BUTTON_BACK) |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
765 { |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
766 ButtonLockState = LOCK_OFF; |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
767 } |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
768 else |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
769 { |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
770 ButtonLockState = LOCK_1; |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
771 } |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
772 break; |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
773 |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
774 default: ButtonLockState = LOCK_OFF; |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
775 break; |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
776 } |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
777 } |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
778 else |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
779 { |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
780 ButtonLockState = LOCK_1; |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
781 } |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
782 lastInput = LastButtonPressedTick; |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
783 ButtonAction = ACTION_END; |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
784 } |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
785 } |
217
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
786 |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
787 static void TriggerButtonAction() |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
788 { |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
789 uint8_t action = ButtonAction; |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
790 SStateList status; |
611
916998f90e39
Suspend MotionDetection events while diver is operationg the OSTC:
Ideenmodellierer
parents:
597
diff
changeset
|
791 SSettings* pSettings; |
916998f90e39
Suspend MotionDetection events while diver is operationg the OSTC:
Ideenmodellierer
parents:
597
diff
changeset
|
792 pSettings = settingsGetPointer(); |
916998f90e39
Suspend MotionDetection events while diver is operationg the OSTC:
Ideenmodellierer
parents:
597
diff
changeset
|
793 |
217
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
794 |
697 | 795 if(action != ACTION_END) |
217
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
796 { |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
797 get_globalStateList(&status); |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
798 |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
799 if (action == ACTION_BUTTON_CUSTOM) { |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
800 GFX_screenshot(); |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
801 } |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
802 |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
803 switch (status.base) { |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
804 case BaseStop: |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
805 if (action == ACTION_BUTTON_BACK) |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
806 resetToFirmwareUpdate(); |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
807 break; |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
808 case BaseComm: /* already handled in tim callback */ |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
809 break; |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
810 case BaseHome: |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
811 if (action == ACTION_BUTTON_NEXT) { |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
812 if (status.page == PageSurface) |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
813 openMenu(1); |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
814 else |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
815 tHomeDiveMenuControl(action); |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
816 } else if (action == ACTION_BUTTON_BACK) { |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
817 if (get_globalState() == StS) |
540 | 818 { |
217
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
819 openInfo(StILOGLIST); |
540 | 820 } |
611
916998f90e39
Suspend MotionDetection events while diver is operationg the OSTC:
Ideenmodellierer
parents:
597
diff
changeset
|
821 else if ((status.page == PageDive) && (pSettings->design < 7)) |
540 | 822 { |
611
916998f90e39
Suspend MotionDetection events while diver is operationg the OSTC:
Ideenmodellierer
parents:
597
diff
changeset
|
823 if(pSettings->design == 3) |
540 | 824 { |
825 if(get_globalState() != StD) /* located in submenu? => return */ | |
826 { | |
827 set_globalState(StD); | |
828 } | |
829 else /* return to t7 view */ | |
830 { | |
611
916998f90e39
Suspend MotionDetection events while diver is operationg the OSTC:
Ideenmodellierer
parents:
597
diff
changeset
|
831 pSettings->design = 7; |
916998f90e39
Suspend MotionDetection events while diver is operationg the OSTC:
Ideenmodellierer
parents:
597
diff
changeset
|
832 if(pSettings->MotionDetection == MOTION_DETECT_SECTOR) |
586
bb5ce239741f
Motion control: Jump back to primary view if focus is lost:
Ideenmodellierer
parents:
561
diff
changeset
|
833 { |
625
028d8f3a9410
Switch Sector / Scroll detection to vector implementation:
Ideenmodellierer
parents:
623
diff
changeset
|
834 DefineSectorCount(CUSTOMER_DEFINED_VIEWS); |
597
132e7e3d13a7
MotionControl-Sector: Map sectors during switch T7 <=> T3:
Ideenmodellierer
parents:
586
diff
changeset
|
835 MapCVToSector(); |
586
bb5ce239741f
Motion control: Jump back to primary view if focus is lost:
Ideenmodellierer
parents:
561
diff
changeset
|
836 } |
540 | 837 } |
838 } | |
839 else | |
840 { | |
611
916998f90e39
Suspend MotionDetection events while diver is operationg the OSTC:
Ideenmodellierer
parents:
597
diff
changeset
|
841 pSettings->design = 7; // auto switch to 9 if necessary |
540 | 842 } |
843 } else if ((status.page == PageDive) && (status.line != 0)) | |
844 { | |
662 | 845 if(get_globalState() == StDMENU) |
384
427ae9f8e28e
Consider number of available t3 views in sector handling:
ideenmodellierer
parents:
382
diff
changeset
|
846 { |
740
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
847 if ((pSettings->extraDisplay == EXTRADISPLAY_BIGFONT) || (pSettings->extraDisplay == EXTRADISPLAY_BFACTIVE)) |
384
427ae9f8e28e
Consider number of available t3 views in sector handling:
ideenmodellierer
parents:
382
diff
changeset
|
848 { |
662 | 849 pSettings->design = 3; |
850 if(pSettings->MotionDetection == MOTION_DETECT_SECTOR) | |
851 { | |
852 DefineSectorCount(CUSTOMER_DEFINED_VIEWS); | |
853 MapCVToSector(); | |
854 } | |
384
427ae9f8e28e
Consider number of available t3 views in sector handling:
ideenmodellierer
parents:
382
diff
changeset
|
855 } |
740
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
856 #ifdef HAVEDECOGAME |
662 | 857 else if (pSettings->extraDisplay == EXTRADISPLAY_DECOGAME) |
858 pSettings->design = 4; | |
740
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
859 #endif |
384
427ae9f8e28e
Consider number of available t3 views in sector handling:
ideenmodellierer
parents:
382
diff
changeset
|
860 } |
217
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
861 set_globalState(StD); |
540 | 862 } |
863 else | |
864 { | |
217
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
865 tHome_change_field_button_pressed(); |
540 | 866 } |
368
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
367
diff
changeset
|
867 } else if ((action == ACTION_BUTTON_ENTER) || (action == ACTION_PITCH_NEG) || (action == ACTION_PITCH_POS)) |
361
b111fc4250e9
Pass action to customer vie update function.
Ideenmodellierer
parents:
360
diff
changeset
|
868 { |
b111fc4250e9
Pass action to customer vie update function.
Ideenmodellierer
parents:
360
diff
changeset
|
869 |
b111fc4250e9
Pass action to customer vie update function.
Ideenmodellierer
parents:
360
diff
changeset
|
870 if ((status.page == PageDive) && (status.line == 0)) |
368
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
367
diff
changeset
|
871 { |
642
c737cf5d9067
Do not show focus indicator in case motion detection is suspended:
Ideenmodellierer
parents:
625
diff
changeset
|
872 if(action == ACTION_BUTTON_ENTER) |
611
916998f90e39
Suspend MotionDetection events while diver is operationg the OSTC:
Ideenmodellierer
parents:
597
diff
changeset
|
873 { |
916998f90e39
Suspend MotionDetection events while diver is operationg the OSTC:
Ideenmodellierer
parents:
597
diff
changeset
|
874 suspendMotionDetection(10); |
916998f90e39
Suspend MotionDetection events while diver is operationg the OSTC:
Ideenmodellierer
parents:
597
diff
changeset
|
875 } |
361
b111fc4250e9
Pass action to customer vie update function.
Ideenmodellierer
parents:
360
diff
changeset
|
876 tHome_change_customview_button_pressed(action); |
368
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
367
diff
changeset
|
877 } |
361
b111fc4250e9
Pass action to customer vie update function.
Ideenmodellierer
parents:
360
diff
changeset
|
878 else if (status.page == PageSurface) |
b111fc4250e9
Pass action to customer vie update function.
Ideenmodellierer
parents:
360
diff
changeset
|
879 tHome_change_customview_button_pressed(action); |
b111fc4250e9
Pass action to customer vie update function.
Ideenmodellierer
parents:
360
diff
changeset
|
880 else |
642
c737cf5d9067
Do not show focus indicator in case motion detection is suspended:
Ideenmodellierer
parents:
625
diff
changeset
|
881 { |
361
b111fc4250e9
Pass action to customer vie update function.
Ideenmodellierer
parents:
360
diff
changeset
|
882 tHomeDiveMenuControl(action); |
642
c737cf5d9067
Do not show focus indicator in case motion detection is suspended:
Ideenmodellierer
parents:
625
diff
changeset
|
883 } |
361
b111fc4250e9
Pass action to customer vie update function.
Ideenmodellierer
parents:
360
diff
changeset
|
884 } |
217
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
885 break; |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
886 |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
887 case BaseMenu: |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
888 if (status.line == 0) |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
889 sendActionToMenu(action); |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
890 else |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
891 sendActionToMenuEdit(action); |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
892 break; |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
893 |
718
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
894 case BaseInfo: switch(status.page) |
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
895 { |
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
896 case InfoPageLogList: sendActionToInfoLogList(action); |
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
897 break; |
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
898 case InfoPageLogShow: sendActionToInfoLogShow(action); |
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
899 break; |
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
900 case InfoPageSensor: sendActionToInfoSensor(action); |
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
901 break; |
845 | 902 case InfoPagePreDive: sendActionToInfoPreDive(action); |
903 break; | |
718
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
904 default: sendActionToInfo(action); |
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
905 break; |
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
906 } |
217
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
907 break; |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
908 |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
909 default: |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
910 break; |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
911 } |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
912 ButtonAction = ACTION_END; |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
913 } |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
914 } |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
915 |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
916 |
300
5ca177d2df5d
cleanup: remove commented/unused code, make static
Jan Mulder <jlmulder@xs4all.nl>
parents:
272
diff
changeset
|
917 static void EvaluateButton() |
152
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
918 { |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
919 uint8_t action = 0; |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
920 SStateList status; |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
921 SSettings* pSettings; |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
922 pSettings = settingsGetPointer(); |
95
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
923 |
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
924 if (GFX_logoStatus() != 0) |
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
925 return; |
38 | 926 |
697 | 927 if ((LastButtonPressed != INVALID_BUTTON) && (time_elapsed_ms(LastButtonPressedTick, HAL_GetTick()) > 40)) |
152
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
928 { |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
929 if (LastButtonPressed == BUTTON_BACK_PIN) { // links |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
930 if (HAL_GPIO_ReadPin(BUTTON_BACK_GPIO_PORT, BUTTON_BACK_PIN) == 1) { |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
931 action = ACTION_BUTTON_BACK; |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
932 } |
95
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
933 } |
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
934 |
152
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
935 else if (LastButtonPressed == BUTTON_ENTER_PIN) { // mitte |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
936 if (HAL_GPIO_ReadPin(BUTTON_ENTER_GPIO_PORT, BUTTON_ENTER_PIN) == 1) { |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
937 action = ACTION_BUTTON_ENTER; |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
938 } |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
939 } |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
940 |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
941 else if (LastButtonPressed == BUTTON_NEXT_PIN) { // rechts |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
942 if (HAL_GPIO_ReadPin(BUTTON_NEXT_GPIO_PORT, BUTTON_NEXT_PIN) == 1) { |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
943 action = ACTION_BUTTON_NEXT; |
108 | 944 } |
945 } | |
38 | 946 |
152
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
947 if(action != 0) |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
948 { |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
949 time_without_button_pressed_deciseconds = 0; |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
950 if(pSettings->FlipDisplay) /* switch action resulting from pressed button */ |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
951 { |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
952 if (action == ACTION_BUTTON_BACK) |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
953 { |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
954 action = ACTION_BUTTON_NEXT; |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
955 } |
158 | 956 else |
152
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
957 { |
158 | 958 if (action == ACTION_BUTTON_NEXT) |
959 { | |
960 action = ACTION_BUTTON_BACK; | |
961 } | |
152
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
962 } |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
963 } |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
964 } |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
965 |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
966 #ifdef BUTTON_CUSTOM_PIN |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
967 else |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
968 if(LastButtonPressed == BUTTON_CUSTOM_PIN) // extra |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
969 action = ACTION_BUTTON_CUSTOM; |
38 | 970 #endif |
971 | |
152
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
972 #ifdef DEMOMODE // user pressed button ? |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
973 if((!demoMachineCall) && demoModeActive()) |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
974 { |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
975 demoSendCommand(action); |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
976 return; |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
977 } |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
978 #endif |
38 | 979 |
152
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
980 get_globalStateList(&status); |
217
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
981 if(status.base == BaseComm) /* main loop is not serviced in comm mode => react immediately */ |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
982 { |
395
eb7696e0510f
Added start of module configuration after eache modul power on
ideenmodellierer
parents:
384
diff
changeset
|
983 switch(action) |
eb7696e0510f
Added start of module configuration after eache modul power on
ideenmodellierer
parents:
384
diff
changeset
|
984 { |
eb7696e0510f
Added start of module configuration after eache modul power on
ideenmodellierer
parents:
384
diff
changeset
|
985 case ACTION_BUTTON_BACK: tComm_exit(); |
eb7696e0510f
Added start of module configuration after eache modul power on
ideenmodellierer
parents:
384
diff
changeset
|
986 break; |
eb7696e0510f
Added start of module configuration after eache modul power on
ideenmodellierer
parents:
384
diff
changeset
|
987 case ACTION_BUTTON_NEXT: tComm_RequestBluetoothStrength(); |
eb7696e0510f
Added start of module configuration after eache modul power on
ideenmodellierer
parents:
384
diff
changeset
|
988 break; |
eb7696e0510f
Added start of module configuration after eache modul power on
ideenmodellierer
parents:
384
diff
changeset
|
989 default: |
eb7696e0510f
Added start of module configuration after eache modul power on
ideenmodellierer
parents:
384
diff
changeset
|
990 break; |
152
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
991 } |
217
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
992 } |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
993 else |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
994 { |
ce05c801b002
Moved display refresh and button action function from tim callback to main loop
ideenmodellierer
parents:
206
diff
changeset
|
995 StoreButtonAction(action); /* Handle action in main loop */ |
152
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
996 } |
bc7795161549
Moved button evaluation out of interrupt handler
Ideenmodellierer
parents:
149
diff
changeset
|
997 LastButtonPressed = INVALID_BUTTON; |
95
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
998 } |
38 | 999 } |
1000 | |
300
5ca177d2df5d
cleanup: remove commented/unused code, make static
Jan Mulder <jlmulder@xs4all.nl>
parents:
272
diff
changeset
|
1001 static void gotoSleep(void) |
38 | 1002 { |
1003 /* not at the moment of testing */ | |
1004 // ext_flash_erase_firmware_if_not_empty(); | |
1005 GFX_logoAutoOff(); | |
422
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1006 ext_flash_write_devicedata(true); /* write data at default position */ |
427 | 1007 ext_flash_write_settings(true); /* write data at default position */ |
38 | 1008 set_globalState(StStop); |
1009 } | |
1010 | |
1011 | |
1012 // ----------------------------- | |
1013 | |
1014 uint32_t get_globalState(void) | |
1015 { | |
1016 return globalStateID; | |
1017 } | |
1018 | |
1019 | |
1020 void get_globalStateList(SStateList *output) | |
1021 { | |
1022 output->base = (uint8_t)((globalStateID >> 28) & 0x0F); | |
1023 output->page = (uint8_t)((globalStateID >> 24) & 0x0F); | |
1024 output->line = (uint8_t)((globalStateID >> 16) & 0xFF); | |
1025 output->field = (uint8_t)((globalStateID >> 8) & 0xFF); | |
1026 output->mode = (uint8_t)((globalStateID ) & 0xFF); | |
1027 } | |
1028 | |
1029 | |
1030 void get_idSpecificStateList(uint32_t id, SStateList *output) | |
1031 { | |
1032 output->base = (uint8_t)((id >> 28) & 0x0F); | |
1033 output->page = (uint8_t)((id >> 24) & 0x0F); | |
1034 output->line = (uint8_t)((id >> 16) & 0xFF); | |
1035 output->field = (uint8_t)((id >> 8) & 0xFF); | |
1036 output->mode = (uint8_t)((id ) & 0xFF); | |
1037 } | |
1038 | |
740
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
1039 SButtonLock get_ButtonLock(void) |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
1040 { |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
1041 return ButtonLockState; |
5078da3845c0
Added button lock after wakeup in surface mode:
Ideenmodellierer
parents:
718
diff
changeset
|
1042 } |
38 | 1043 |
1044 void set_globalState_Menu_Page(uint8_t page) | |
1045 { | |
1046 globalStateID = ((BaseMenu << 28) + (page << 24)); | |
1047 } | |
1048 | |
1049 void set_globalState_Log_Page(uint8_t pageIsLine) | |
1050 { | |
1051 globalStateID = StILOGLIST + (pageIsLine << 16); | |
1052 } | |
1053 | |
1054 | |
1055 void set_globalState_Menu_Line(uint8_t line) | |
1056 { | |
1057 globalStateID = ((globalStateID & MaskLineFieldDigit) + (line << 16)); | |
1058 } | |
1059 | |
1060 | |
776
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
773
diff
changeset
|
1061 uint8_t get_globalState_Menu_Line(void) |
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
773
diff
changeset
|
1062 { |
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
773
diff
changeset
|
1063 return (globalStateID & ~MaskLineFieldDigit) >> 16; |
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
773
diff
changeset
|
1064 } |
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
773
diff
changeset
|
1065 |
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
773
diff
changeset
|
1066 |
38 | 1067 void set_globalState(uint32_t newID) |
1068 { | |
1069 globalStateID = newID; | |
1070 } | |
1071 | |
1072 void set_returnFromComm(void) | |
1073 { | |
1074 returnFromCommCleanUpRequest = 1; | |
1075 } | |
1076 | |
1077 uint8_t font_update_required(void) | |
1078 { | |
1079 uint8_t *fontVersionHigh; | |
1080 uint8_t *fontVersionLow; | |
1081 | |
1082 fontVersionHigh = (uint8_t *)0x08132000; | |
1083 fontVersionLow = (uint8_t *)0x08132001; | |
1084 | |
1085 if(FONTminimum_required_high() < *fontVersionHigh) | |
1086 return 0; | |
1087 | |
1088 if((FONTminimum_required_high() == *fontVersionHigh) && (FONTminimum_required_low() <= *fontVersionLow)) | |
1089 return 0; | |
1090 | |
1091 return 1; | |
1092 } | |
1093 | |
1094 | |
132
135eae957389
Add compile switch to disable optimization for specific function
Ideenmodellierer
parents:
116
diff
changeset
|
1095 __attribute__((optimize("O0"))) void delayMicros(uint32_t micros) |
38 | 1096 { |
1097 micros = micros * (168/4) - 10; | |
1098 while(micros--); | |
1099 } | |
1100 | |
1101 | |
1102 void get_RTC_DateTime(RTC_DateTypeDef * sdatestructureget, RTC_TimeTypeDef * stimestructureget) | |
1103 { | |
1104 /* Get the RTC current Time */ | |
1105 if(sdatestructureget) | |
1106 HAL_RTC_GetTime(&RtcHandle, stimestructureget, FORMAT_BIN); | |
1107 /* Get the RTC current Date */ | |
1108 if(stimestructureget) | |
1109 HAL_RTC_GetDate(&RtcHandle, sdatestructureget, FORMAT_BIN); | |
1110 } | |
1111 | |
1112 | |
1113 void set_RTC_DateTime(RTC_DateTypeDef * sdatestructure, RTC_TimeTypeDef * stimestructure) | |
1114 { | |
1115 if(sdatestructure) | |
1116 if(HAL_RTC_SetDate(&RtcHandle,sdatestructure,FORMAT_BCD) != HAL_OK) | |
1117 { | |
1118 /* Initialization Error */ | |
1119 Error_Handler(); | |
1120 } | |
1121 | |
1122 if(stimestructure) | |
1123 if(HAL_RTC_SetTime(&RtcHandle,stimestructure,FORMAT_BCD) != HAL_OK) | |
1124 { | |
1125 /* Initialization Error */ | |
1126 Error_Handler(); | |
1127 } | |
1128 } | |
1129 | |
1130 static void TIM_init(void) | |
1131 { | |
1132 uint16_t uwPrescalerValue = 0; | |
1133 | |
1134 uwPrescalerValue = (uint32_t) ((SystemCoreClock /2) / 10000) - 1; | |
1135 | |
1136 /* Set TIMx instance */ | |
1137 TimHandle.Instance = TIMx; | |
1138 | |
1139 /* Initialize TIM3 peripheral as follows: | |
1140 + Period = 10000 - 1 | |
1141 + Prescaler = ((SystemCoreClock/2)/10000) - 1 | |
1142 + ClockDivision = 0 | |
1143 + Counter direction = Up | |
1144 */ | |
1145 TimHandle.Init.Period = 1000 - 1; | |
1146 TimHandle.Init.Prescaler = uwPrescalerValue; | |
1147 TimHandle.Init.ClockDivision = 0; | |
1148 TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP; | |
1149 if(HAL_TIM_Base_Init(&TimHandle) != HAL_OK) | |
1150 { | |
1151 /* Initialization Error */ | |
1152 Error_Handler(); | |
1153 } | |
1154 | |
1155 /*##-2- Start the TIM Base generation in interrupt mode ####################*/ | |
1156 /* Start Channel1 */ | |
1157 if(HAL_TIM_Base_Start_IT(&TimHandle) != HAL_OK) | |
1158 { | |
1159 /* Starting Error */ | |
1160 Error_Handler(); | |
1161 } | |
1162 } | |
1163 | |
1164 #ifdef DEMOMODE | |
1165 static void TIM_DEMO_init(void) | |
1166 { | |
1167 uint16_t uwPrescalerValue = 0; | |
1168 | |
1169 uwPrescalerValue = (uint32_t) ((SystemCoreClock /2) / 10000) - 1; | |
1170 | |
1171 /* Set TIMx instance */ | |
1172 TimDemoHandle.Instance = TIM7; | |
1173 | |
1174 /* Initialize TIM3 peripheral as follows: | |
1175 + Period = 10000 - 1 | |
1176 + Prescaler = ((SystemCoreClock/2)/10000) - 1 | |
1177 + ClockDivision = 0 | |
1178 + Counter direction = Up | |
1179 */ | |
1180 TimDemoHandle.Init.Period = 1000 - 1; | |
1181 TimDemoHandle.Init.Prescaler = uwPrescalerValue; | |
1182 TimDemoHandle.Init.ClockDivision = 0; | |
1183 TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP; | |
1184 if(HAL_TIM_Base_Init(&TimDemoHandle) != HAL_OK) | |
1185 { | |
1186 /* Initialization Error */ | |
1187 Error_Handler(); | |
1188 } | |
1189 | |
1190 /*##-2- Start the TIM Base generation in interrupt mode ####################*/ | |
1191 /* Start Channel1 */ | |
1192 if(HAL_TIM_Base_Start_IT(&TimDemoHandle) != HAL_OK) | |
1193 { | |
1194 /* Starting Error */ | |
1195 Error_Handler(); | |
1196 } | |
1197 } | |
1198 #endif | |
1199 | |
1200 | |
1201 | |
1202 #ifndef TIM_BACKLIGHT | |
1203 | |
1204 static uint32_t TIM_BACKLIGHT_adjust(void) | |
1205 { | |
1206 return 0; | |
1207 } | |
1208 | |
1209 static void TIM_BACKLIGHT_init(void) | |
1210 { | |
1211 } | |
1212 #else | |
1213 static uint32_t TIM_BACKLIGHT_adjust(void) | |
1214 { | |
1215 static uint32_t levelActual = 12000; | |
1216 static uint8_t brightnessModeLast = 0; | |
1217 // static _Bool wasLostConnection = 0; | |
1218 | |
1219 uint32_t levelAmbient; | |
1220 uint32_t levelMax; | |
1221 uint32_t levelMin; | |
1222 uint32_t levelUpStep_100ms = 200; | |
1223 uint32_t levelDnStep_100ms = 20; | |
1224 | |
1225 TIM_OC_InitTypeDef sConfig; | |
1226 sConfig.OCMode = TIM_OCMODE_PWM1; | |
1227 sConfig.OCPolarity = TIM_OCPOLARITY_HIGH; | |
1228 sConfig.OCFastMode = TIM_OCFAST_DISABLE; | |
1229 | |
1230 const SDiveState * pStateReal = stateRealGetPointer(); | |
1231 | |
1232 | |
1233 // if(pStateReal->data_old__lost_connection_to_slave) | |
1234 // { | |
1235 // changed 160613 from 6000 to 12000 | |
1236 // removed hw 161209 | |
1237 // levelAmbient = 12000; | |
1238 // levelActual = 12000; | |
1239 // wasLostConnection = 1; | |
1240 // } | |
1241 // else | |
1242 // { | |
1243 SSettings *pSettings = settingsGetPointer(); | |
1244 /* 300 - 4000 */ | |
1245 /* important levelAmbient 300 - 1200 */ | |
1246 levelAmbient = 10 * pStateReal->lifeData.ambient_light_level; | |
1247 | |
670
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1248 if((pStateReal->chargeStatus == CHARGER_running) || (pStateReal->chargeStatus == CHARGER_lostConnection)) |
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1249 { |
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1250 levelMax = 1000; |
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1251 levelMin = 500; |
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1252 } |
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1253 else |
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1254 { |
549
469e93f8633e
Only execute motion detection functions if features is enabled:
Ideenmodellierer
parents:
540
diff
changeset
|
1255 switch( pSettings->brightness + blBoost) |
38 | 1256 { |
1257 case 0: /* Cave */ | |
1258 levelMax = 3000;/* max 25 % (x2) */ | |
1259 levelMin = 1500; | |
1260 break; | |
1261 case 1: /* Eco */ | |
1262 levelMax = 6000;/* max 50 % (x2) */ | |
1263 levelMin = 3000; | |
1264 break; | |
1265 case 2: /* Std */ | |
1266 levelAmbient += 1000; | |
1267 levelMax = 9000; | |
1268 levelMin = 4500; | |
1269 levelUpStep_100ms += levelUpStep_100ms/2; // 4500 instead of 3000 | |
1270 levelDnStep_100ms += levelDnStep_100ms/2; | |
1271 break; | |
1272 case 3: /* High */ | |
1273 default: | |
1274 levelAmbient += 3000; | |
1275 levelMax = 12000; /* max 100% (x2) */ | |
1276 levelMin = 6000; | |
1277 levelUpStep_100ms += levelUpStep_100ms; // 6000 instead of 3000 | |
1278 levelDnStep_100ms += levelDnStep_100ms; | |
1279 break; | |
1280 case 4: /* New Max */ | |
1281 levelAmbient = 12000; | |
1282 levelMax = 12000; /* max 100% (x2) */ | |
1283 levelMin = 12000; | |
1284 levelUpStep_100ms += 12000; | |
1285 levelDnStep_100ms += 0; | |
1286 break; | |
1287 } | |
1288 | |
1289 if((pSettings->brightness != brightnessModeLast))// || wasLostConnection) | |
1290 { | |
1291 levelActual = levelAmbient; | |
1292 brightnessModeLast = pSettings->brightness; | |
1293 // wasLostConnection = 0; | |
1294 } | |
1295 // } | |
670
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1296 } |
38 | 1297 |
1298 if(levelAmbient > levelActual) | |
1299 levelActual += levelUpStep_100ms; | |
1300 else | |
1301 if((levelAmbient < levelActual) && (levelActual > levelMin) && (levelActual > levelDnStep_100ms)) | |
1302 levelActual -= levelDnStep_100ms; | |
1303 | |
1304 if(levelActual > levelMax) | |
1305 levelActual = levelMax; | |
1306 else | |
1307 if(levelActual < levelMin) | |
670
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1308 { |
38 | 1309 levelActual = levelMin; |
670
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1310 } |
38 | 1311 // sConfig.Pulse = levelActual / 20; |
1312 sConfig.Pulse = (levelMin + ((levelMax - levelMin)/2)) / 20; // added 170306 | |
1313 | |
1314 /* xx - 600 */ | |
1315 if(sConfig.Pulse > 600) | |
1316 sConfig.Pulse = 600; | |
1317 else | |
670
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1318 if(sConfig.Pulse < 25) |
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1319 sConfig.Pulse = 25; |
38 | 1320 |
1321 HAL_TIM_PWM_ConfigChannel(&TimBacklightHandle, &sConfig, TIM_BACKLIGHT_CHANNEL); | |
1322 HAL_TIM_PWM_Start(&TimBacklightHandle, TIM_BACKLIGHT_CHANNEL); | |
1323 | |
1324 return levelActual; | |
1325 } | |
1326 | |
1327 static void TIM_BACKLIGHT_init(void) | |
1328 { | |
1329 uint32_t uwPrescalerValue = 0; | |
1330 TIM_OC_InitTypeDef sConfig; | |
1331 | |
1332 uwPrescalerValue = (uint32_t) ((SystemCoreClock /2) / 18000000) - 1; | |
1333 | |
1334 TimBacklightHandle.Instance = TIM_BACKLIGHT; | |
1335 | |
1336 /* Initialize TIM3 peripheral as follows: | |
1337 30 kHz | |
1338 */ | |
1339 TimBacklightHandle.Init.Period = 600 - 1; | |
1340 TimBacklightHandle.Init.Prescaler = uwPrescalerValue; | |
1341 TimBacklightHandle.Init.ClockDivision = 0; | |
1342 TimBacklightHandle.Init.CounterMode = TIM_COUNTERMODE_UP; | |
1343 HAL_TIM_PWM_Init(&TimBacklightHandle); | |
1344 | |
1345 sConfig.OCMode = TIM_OCMODE_PWM1; | |
1346 sConfig.OCPolarity = TIM_OCPOLARITY_HIGH; | |
1347 sConfig.OCFastMode = TIM_OCFAST_DISABLE; | |
263
a6c0375bc950
Forward 100ms time stamp to RTE and handle logbook in main loop
ideenmodellierer
parents:
250
diff
changeset
|
1348 sConfig.Pulse = 100; /* Initial brigthness of display */ |
38 | 1349 |
1350 HAL_TIM_PWM_ConfigChannel(&TimBacklightHandle, &sConfig, TIM_BACKLIGHT_CHANNEL); | |
1351 HAL_TIM_PWM_Start(&TimBacklightHandle, TIM_BACKLIGHT_CHANNEL); | |
1352 } | |
1353 #endif | |
1354 | |
1355 | |
549
469e93f8633e
Only execute motion detection functions if features is enabled:
Ideenmodellierer
parents:
540
diff
changeset
|
1356 void set_Backlight_Boost(uint8_t level) |
469e93f8633e
Only execute motion detection functions if features is enabled:
Ideenmodellierer
parents:
540
diff
changeset
|
1357 { |
469e93f8633e
Only execute motion detection functions if features is enabled:
Ideenmodellierer
parents:
540
diff
changeset
|
1358 if(level < 3) |
469e93f8633e
Only execute motion detection functions if features is enabled:
Ideenmodellierer
parents:
540
diff
changeset
|
1359 { |
469e93f8633e
Only execute motion detection functions if features is enabled:
Ideenmodellierer
parents:
540
diff
changeset
|
1360 blBoost = level; |
469e93f8633e
Only execute motion detection functions if features is enabled:
Ideenmodellierer
parents:
540
diff
changeset
|
1361 } |
469e93f8633e
Only execute motion detection functions if features is enabled:
Ideenmodellierer
parents:
540
diff
changeset
|
1362 } |
469e93f8633e
Only execute motion detection functions if features is enabled:
Ideenmodellierer
parents:
540
diff
changeset
|
1363 |
38 | 1364 static void EXTILine_Buttons_Config(void) |
1365 { | |
1366 GPIO_InitTypeDef GPIO_InitStructure; | |
1367 | |
1368 BUTTON_ENTER_GPIO_ENABLE(); | |
1369 BUTTON_NEXT_GPIO_ENABLE(); | |
1370 BUTTON_BACK_GPIO_ENABLE(); | |
1371 | |
1372 /* Configure pin as weak PULLUP input */ | |
1373 /* buttons */ | |
1374 GPIO_InitStructure.Mode = GPIO_MODE_IT_RISING; | |
1375 GPIO_InitStructure.Pull = GPIO_NOPULL; | |
1376 GPIO_InitStructure.Speed = GPIO_SPEED_LOW; | |
1377 | |
1378 GPIO_InitStructure.Pin = BUTTON_ENTER_PIN; | |
1379 HAL_GPIO_Init(BUTTON_ENTER_GPIO_PORT, &GPIO_InitStructure); | |
1380 | |
1381 GPIO_InitStructure.Pin = BUTTON_NEXT_PIN; | |
1382 HAL_GPIO_Init(BUTTON_NEXT_GPIO_PORT, &GPIO_InitStructure); | |
1383 | |
1384 GPIO_InitStructure.Pin = BUTTON_BACK_PIN; | |
1385 HAL_GPIO_Init(BUTTON_BACK_GPIO_PORT, &GPIO_InitStructure); | |
1386 | |
1387 /* Enable and set EXTI Line0 Interrupt to the lowest priority */ | |
1388 HAL_NVIC_SetPriority(BUTTON_ENTER_EXTI_IRQn, 2, 0); | |
1389 HAL_NVIC_SetPriority(BUTTON_NEXT_EXTI_IRQn, 2, 0); | |
1390 HAL_NVIC_SetPriority(BUTTON_BACK_EXTI_IRQn, 2, 0); | |
1391 HAL_NVIC_EnableIRQ(BUTTON_ENTER_EXTI_IRQn); | |
1392 HAL_NVIC_EnableIRQ(BUTTON_NEXT_EXTI_IRQn); | |
1393 HAL_NVIC_EnableIRQ(BUTTON_BACK_EXTI_IRQn); | |
1394 | |
1395 #ifdef BUTTON_CUSTOM_PIN | |
1396 BUTTON_CUSTOM_GPIO_ENABLE(); | |
1397 GPIO_InitStructure.Pin = BUTTON_CUSTOM_PIN; | |
1398 HAL_GPIO_Init(BUTTON_CUSTOM_GPIO_PORT, &GPIO_InitStructure); | |
1399 HAL_NVIC_SetPriority(BUTTON_CUSTOM_EXTI_IRQn, 2, 0); | |
1400 HAL_NVIC_EnableIRQ(BUTTON_CUSTOM_EXTI_IRQn); | |
1401 #endif | |
1402 } | |
1403 | |
1404 | |
1405 /** | |
1406 * @brief System Clock Configuration | |
1407 * The system Clock is configured as follow : | |
1408 * System Clock source = PLL (HSE) | |
1409 * SYSCLK(Hz) = 180000000 | |
1410 * HCLK(Hz) = 180000000 | |
1411 * AHB Prescaler = 1 | |
1412 * APB1 Prescaler = 4 | |
1413 * APB2 Prescaler = 2 | |
1414 * HSE Frequency(Hz) = 8000000 | |
1415 * PLL_M = 8 | |
1416 * PLL_N = 360 | |
1417 * PLL_P = 2 | |
1418 * PLL_Q = 7 | |
1419 * VDD(V) = 3.3 | |
1420 * Main regulator output voltage = Scale1 mode | |
1421 * Flash Latency(WS) = 5 | |
1422 * The LTDC Clock is configured as follow : | |
1423 * PLLSAIN = 192 | |
1424 * PLLSAIR = 4 | |
1425 * PLLSAIDivR = 8 | |
1426 * @param None | |
1427 * @retval None | |
1428 */ | |
1429 static void SystemClock_Config(void) | |
1430 { | |
1431 | |
1432 /* Enable Power Control clock */ | |
1433 __PWR_CLK_ENABLE(); | |
1434 | |
1435 /* The voltage scaling allows optimizing the power consumption when the device is | |
1436 clocked below the maximum system frequency, to update the voltage scaling value | |
1437 regarding system frequency refer to product datasheet. */ | |
1438 __HAL_PWR_VOLTAGESCALING_CONFIG( PWR_REGULATOR_VOLTAGE_SCALE1 ); | |
1439 | |
1440 /*##-1- System Clock Configuration #########################################*/ | |
1441 /* Enable HighSpeed Oscillator and activate PLL with HSE/HSI as source */ | |
1442 RCC_OscInitTypeDef RCC_OscInitStruct = { 0 }; | |
1443 #ifdef DISC1_BOARD | |
1444 // Use High Speed Internal (HSI) oscillator, running at 16MHz. | |
1445 RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; | |
1446 RCC_OscInitStruct.HSIState = RCC_HSI_ON; | |
1447 RCC_OscInitStruct.HSICalibrationValue = 0x10; | |
1448 RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; | |
1449 RCC_OscInitStruct.PLL.PLLM = 16; // HSI/16 is 1Mhz. | |
1450 #else | |
1451 // Use High Speed External oscillator, running at 8MHz | |
1452 RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; | |
1453 RCC_OscInitStruct.HSEState = RCC_HSE_ON; | |
1454 RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; | |
1455 RCC_OscInitStruct.PLL.PLLM = 8; // HSE/8 is 1Mhz. | |
1456 #endif | |
1457 // System clock = PLL (1MHz) * N/p = 180 MHz. | |
1458 RCC_OscInitStruct.PLL.PLLN = 360; | |
1459 RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; | |
1460 RCC_OscInitStruct.PLL.PLLQ = 7; | |
1461 RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; | |
1462 HAL_RCC_OscConfig( &RCC_OscInitStruct ); | |
1463 | |
1464 // HAL_PWREx_ActivateOverDrive(); | |
1465 HAL_PWREx_DeactivateOverDrive(); | |
1466 | |
1467 /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ | |
1468 RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 }; | |
1469 RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | |
1470 | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; | |
1471 RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; | |
1472 RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; | |
1473 RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; | |
1474 RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; | |
1475 HAL_RCC_ClockConfig( &RCC_ClkInitStruct, FLASH_LATENCY_8 ); //FLASH_LATENCY_5); | |
1476 | |
1477 /*##-2- LTDC Clock Configuration ###########################################*/ | |
1478 /* LCD clock configuration */ | |
1479 /* PLLSAI_VCO Input = HSE_VALUE/PLL_M = 1 Mhz */ | |
1480 /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN = 192 Mhz */ | |
1481 /* PLLLCDCLK = PLLSAI_VCO Output/PLLSAIR = 192/4 = 48 Mhz */ | |
1482 /* LTDC clock frequency = PLLLCDCLK / RCC_PLLSAIDIVR_8 = 48/8 = 6 Mhz */ | |
1483 | |
1484 /* neu: 8MHz/8*300/5/8 = 7,5 MHz = 19,5 Hz bei 800 x 480 */ | |
1485 RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; | |
1486 PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_LTDC; | |
1487 PeriphClkInitStruct.PLLSAI.PLLSAIN = 300; //192; | |
1488 PeriphClkInitStruct.PLLSAI.PLLSAIR = 5; //4; | |
1489 PeriphClkInitStruct.PLLSAIDivR = RCC_PLLSAIDIVR_8;//RCC_PLLSAIDIVR_4;// RCC_PLLSAIDIVR_2; // RCC_PLLSAIDIVR_8 | |
1490 HAL_RCCEx_PeriphCLKConfig( &PeriphClkInitStruct ); | |
1491 } | |
1492 | |
1493 | |
1494 /** | |
1495 * @brief This function is executed in case of error occurrence. | |
1496 * @param None | |
1497 * @retval None | |
1498 */ | |
1499 static void Error_Handler(void) | |
1500 { | |
1501 /* Turn LED3 on */ | |
1502 // BSP_LED_On(LED3); | |
1503 while(1) | |
1504 { | |
1505 } | |
1506 } | |
1507 | |
95
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
1508 /** |
38 | 1509 * @brief Perform the SDRAM exernal memory inialization sequence |
1510 * @param hsdram: SDRAM handle | |
1511 * @param Command: Pointer to SDRAM command structure | |
1512 * @retval None | |
1513 */ | |
1514 static void SDRAM_Initialization_Sequence(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command) | |
1515 { | |
1516 __IO uint32_t tmpmrd =0; | |
1517 /* Step 3: Configure a clock configuration enable command */ | |
1518 Command->CommandMode = FMC_SDRAM_CMD_CLK_ENABLE; | |
1519 Command->CommandTarget = FMC_SDRAM_CMD_TARGET_BANK2; | |
1520 Command->AutoRefreshNumber = 1; | |
1521 Command->ModeRegisterDefinition = 0; | |
95
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
1522 |
38 | 1523 /* Send the command */ |
1524 HAL_SDRAM_SendCommand(hsdram, Command, 0x1000); | |
1525 | |
1526 /* Step 4: Insert 100 ms delay */ | |
1527 HAL_Delay(100); | |
95
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
1528 |
38 | 1529 /* Step 5: Configure a PALL (precharge all) command */ |
1530 Command->CommandMode = FMC_SDRAM_CMD_PALL; | |
1531 Command->CommandTarget = FMC_SDRAM_CMD_TARGET_BANK2; | |
1532 Command->AutoRefreshNumber = 1; | |
1533 Command->ModeRegisterDefinition = 0; | |
1534 | |
1535 /* Send the command */ | |
1536 HAL_SDRAM_SendCommand(hsdram, Command, 0x1000); | |
95
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
1537 |
38 | 1538 /* Step 6 : Configure a Auto-Refresh command */ |
1539 Command->CommandMode = FMC_SDRAM_CMD_AUTOREFRESH_MODE; | |
1540 Command->CommandTarget = FMC_SDRAM_CMD_TARGET_BANK2; | |
1541 Command->AutoRefreshNumber = 4; | |
1542 Command->ModeRegisterDefinition = 0; | |
1543 | |
1544 /* Send the command */ | |
1545 HAL_SDRAM_SendCommand(hsdram, Command, 0x1000); | |
95
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
1546 |
38 | 1547 /* Step 7: Program the external memory mode register */ |
1548 tmpmrd = (uint32_t)SDRAM_MODEREG_BURST_LENGTH_2 | | |
1549 SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL | | |
1550 SDRAM_MODEREG_CAS_LATENCY_3 | | |
1551 SDRAM_MODEREG_OPERATING_MODE_STANDARD | | |
1552 SDRAM_MODEREG_WRITEBURST_MODE_SINGLE; | |
95
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
1553 |
38 | 1554 Command->CommandMode = FMC_SDRAM_CMD_LOAD_MODE; |
1555 Command->CommandTarget = FMC_SDRAM_CMD_TARGET_BANK2; | |
1556 Command->AutoRefreshNumber = 1; | |
1557 Command->ModeRegisterDefinition = tmpmrd; | |
95
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
1558 |
38 | 1559 /* Send the command */ |
1560 HAL_SDRAM_SendCommand(hsdram, Command, 0x1000); | |
1561 | |
1562 /* Step 8: Set the refresh rate counter */ | |
1563 /* (15.62 us x Freq) - 20 */ | |
1564 /* neu: (8 us x Freq) - 20 */ | |
1565 /* Set the device refresh counter */ | |
1566 HAL_SDRAM_ProgramRefreshRate(hsdram, REFRESH_COUNT); | |
95
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
1567 } |
38 | 1568 |
1569 | |
1570 /** | |
1571 ****************************************************************************** | |
1572 ****************************************************************************** | |
1573 ****************************************************************************** | |
1574 */ | |
1575 | |
1576 | |
1577 /** | |
1578 * @brief DMA2D configuration. | |
1579 * @note This function Configure tha DMA2D peripheral : | |
1580 * 1) Configure the transfer mode : memory to memory W/ pixel format conversion | |
1581 * 2) Configure the output color mode as ARGB4444 | |
1582 * 3) Configure the output memory address at SRAM memory | |
1583 * 4) Configure the data size : 320x120 (pixels) | |
1584 * 5) Configure the input color mode as ARGB8888 | |
1585 * 6) Configure the input memory address at FLASH memory | |
1586 * @retval | |
1587 * None | |
1588 */ | |
1589 | |
1590 static void SDRAM_Config(void) | |
1591 { | |
1592 /*##-1- Configure the SDRAM device #########################################*/ | |
1593 /* SDRAM device configuration */ | |
1594 hsdram.Instance = FMC_SDRAM_DEVICE; | |
1595 | |
1596 /* Timing configuration for 90 Mhz of SD clock frequency (180Mhz/2) */ | |
1597 /* TMRD: 2 Clock cycles */ | |
1598 SDRAM_Timing.LoadToActiveDelay = 2; | |
1599 /* TXSR: min=70ns (6x11.90ns) */ | |
1600 SDRAM_Timing.ExitSelfRefreshDelay = 7; | |
1601 /* TRAS: min=42ns (4x11.90ns) max=120k (ns) */ | |
1602 SDRAM_Timing.SelfRefreshTime = 4; | |
1603 /* TRC: min=63 (6x11.90ns) */ | |
1604 SDRAM_Timing.RowCycleDelay = 7; | |
1605 /* TWR: 2 Clock cycles */ | |
1606 SDRAM_Timing.WriteRecoveryTime = 2; | |
1607 /* TRP: 15ns => 2x11.90ns */ | |
1608 SDRAM_Timing.RPDelay = 2; | |
1609 /* TRCD: 15ns => 2x11.90ns */ | |
1610 SDRAM_Timing.RCDDelay = 2; | |
1611 | |
1612 hsdram.Init.SDBank = FMC_SDRAM_BANK2; | |
1613 hsdram.Init.ColumnBitsNumber = FMC_SDRAM_COLUMN_BITS_NUM_9; | |
1614 hsdram.Init.RowBitsNumber = FMC_SDRAM_ROW_BITS_NUM_13; | |
1615 hsdram.Init.MemoryDataWidth = SDRAM_MEMORY_WIDTH; | |
1616 hsdram.Init.InternalBankNumber = FMC_SDRAM_INTERN_BANKS_NUM_4; | |
1617 hsdram.Init.CASLatency = FMC_SDRAM_CAS_LATENCY_3; | |
1618 hsdram.Init.WriteProtection = FMC_SDRAM_WRITE_PROTECTION_DISABLE; | |
1619 hsdram.Init.SDClockPeriod = SDCLOCK_PERIOD; | |
1620 hsdram.Init.ReadBurst = FMC_SDRAM_RBURST_DISABLE; | |
1621 hsdram.Init.ReadPipeDelay = FMC_SDRAM_RPIPE_DELAY_1; | |
1622 | |
1623 /* Initialize the SDRAM controller */ | |
1624 if(HAL_SDRAM_Init(&hsdram, &SDRAM_Timing) != HAL_OK) | |
1625 { | |
1626 /* Initialization Error */ | |
1627 Error_Handler(); | |
1628 } | |
95
2a74647d28d1
Debounce. Bounced buttons fixed.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
1629 |
38 | 1630 /* Program the SDRAM external device */ |
1631 SDRAM_Initialization_Sequence(&hsdram, &command); | |
1632 } | |
1633 | |
1634 | |
1635 #ifdef USE_FULL_ASSERT | |
1636 | |
1637 /** | |
1638 * @brief Reports the name of the source file and the source line number | |
1639 * where the assert_param error has occurred. | |
1640 * @param file: pointer to the source file name | |
1641 * @param line: assert_param error line source number | |
1642 * @retval None | |
1643 */ | |
1644 void assert_failed(uint8_t* file, uint32_t line) | |
1645 { | |
1646 /* User can add his own implementation to report the file name and line number, | |
1647 ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ | |
1648 | |
1649 /* Infinite loop */ | |
1650 while (1) | |
1651 { | |
1652 } | |
1653 } | |
1654 #endif | |
1655 | |
1656 | |
300
5ca177d2df5d
cleanup: remove commented/unused code, make static
Jan Mulder <jlmulder@xs4all.nl>
parents:
272
diff
changeset
|
1657 static void deco_loop(void) |
38 | 1658 { |
1659 typedef enum | |
1660 { | |
1661 CALC_VPM, | |
1662 CALC_VPM_FUTURE, | |
1663 CALC_BUEHLMANN, | |
1664 CALC_BUEHLMANN_FUTURE, | |
149 | 1665 CALC_INVALID |
38 | 1666 } CALC_WHAT; |
1667 | |
149 | 1668 static CALC_WHAT what = CALC_INVALID; |
223
5f535ef6a3db
Bugfix, minor: properly alternate VPM/Buhlmann in deco loop
Jan Mulder <jlmulder@xs4all.nl>
parents:
217
diff
changeset
|
1669 static int counter = 0; |
412 | 1670 if((stateUsed->mode != MODE_DIVE) || (stateUsed->diveSettings.diveMode == DIVEMODE_Apnea) || (stateUsed->diveSettings.diveMode == DIVEMODE_Gauge) || (decoLock != DECO_CALC_ready )) |
38 | 1671 return; |
1672 | |
651 | 1673 if((stateUsed->warnings.betterSetpoint) && (settingsGetPointer()->autoSetpoint) && (settingsGetPointer()->CCR_Mode == CCRMODE_FixedSetpoint)) |
1674 { | |
773
2c243233c999
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
heinrichsweikamp
parents:
765
diff
changeset
|
1675 openEdit_DiveSelectBetterSetpoint(false); |
651 | 1676 } |
1677 | |
38 | 1678 decoLock = DECO_CALC_running; |
1679 | |
1680 if(stateDeco.diveSettings.deco_type.ub.standard == GF_MODE) | |
1681 { | |
1682 // hw 151110 mh wants future TTS even in deco zone if((what == CALC_BUEHLMANN) && (stateDeco.lifeData.pressure_ambient_bar > stateDeco.diveSettings.internal__pressure_first_stop_ambient_bar_as_upper_limit_for_gf_low_otherwise_zero)) | |
1683 if(what == CALC_BUEHLMANN) | |
1684 { | |
1685 //Calc future | |
1686 what = CALC_BUEHLMANN_FUTURE; | |
1687 } | |
1688 else | |
1689 what = CALC_BUEHLMANN; | |
1690 | |
1691 } | |
1692 else | |
1693 { | |
1694 // hw 151110 mh wants future TTS even in deco zone if((what == CALC_VPM) && (!stateDeco.vpm.deco_zone_reached)) | |
1695 if(what == CALC_VPM) | |
1696 { | |
1697 //Calc future | |
1698 what = CALC_VPM_FUTURE; | |
1699 } | |
1700 else | |
1701 what = CALC_VPM; | |
1702 } | |
1703 | |
1704 //In one of ten calc the other option | |
1705 if(counter == 10) | |
1706 { | |
1707 if(what == CALC_VPM) | |
1708 what = CALC_BUEHLMANN; | |
1709 if(what == CALC_BUEHLMANN) | |
1710 what = CALC_VPM; | |
1711 counter = 0; | |
1712 } | |
1713 | |
1714 decom_CreateGasChangeList(&stateDeco.diveSettings, &stateDeco.lifeData); | |
1715 | |
1716 switch(what) | |
1717 { | |
149 | 1718 case CALC_VPM: |
1719 vpm_calc(&stateDeco.lifeData,&stateDeco.diveSettings,&stateDeco.vpm,&stateDeco.decolistVPM, DECOSTOPS); | |
1720 decoLock = DECO_CALC_FINSHED_vpm; | |
1721 return; | |
1722 case CALC_VPM_FUTURE: | |
1723 decom_tissues_exposure(stateDeco.diveSettings.future_TTS_minutes * 60,&stateDeco.lifeData); | |
1724 vpm_calc(&stateDeco.lifeData,&stateDeco.diveSettings,&stateDeco.vpm,&stateDeco.decolistFutureVPM, FUTURESTOPS); | |
1725 decoLock = DECO_CALC_FINSHED_Futurevpm; | |
1726 return; | |
1727 case CALC_BUEHLMANN: | |
1728 buehlmann_calc_deco(&stateDeco.lifeData,&stateDeco.diveSettings,&stateDeco.decolistBuehlmann); | |
250
822416168585
Buelmann: new implementation for ceiling
Jan Mulder <jlmulder@xs4all.nl>
parents:
248
diff
changeset
|
1729 buehlmann_ceiling_calculator(&stateDeco.lifeData, &stateDeco.decolistBuehlmann); |
248 | 1730 buehlmann_super_saturation_calculator(&stateDeco.lifeData,&stateDeco.decolistBuehlmann); |
149 | 1731 decoLock = DECO_CALC_FINSHED_Buehlmann; |
1732 return; | |
1733 case CALC_BUEHLMANN_FUTURE: | |
1734 decom_tissues_exposure(stateDeco.diveSettings.future_TTS_minutes * 60,&stateDeco.lifeData); | |
1735 buehlmann_calc_deco(&stateDeco.lifeData,&stateDeco.diveSettings,&stateDeco.decolistFutureBuehlmann); | |
1736 decoLock = DECO_CALC_FINSHED_FutureBuehlmann; | |
1737 return; | |
1738 default: break; | |
38 | 1739 } |
1740 counter++; | |
1741 } | |
1742 | |
300
5ca177d2df5d
cleanup: remove commented/unused code, make static
Jan Mulder <jlmulder@xs4all.nl>
parents:
272
diff
changeset
|
1743 static void resetToFirmwareUpdate(void) |
38 | 1744 { |
1745 __HAL_RCC_CLEAR_RESET_FLAGS(); | |
1746 HAL_NVIC_SystemReset(); | |
1747 } | |
1748 | |
422
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1749 static void TimeoutControlRequestModechange(void) |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1750 { |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1751 RequestModeChange = 1; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1752 } |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1753 |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1754 static void TimeoutControl(void) |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1755 { |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1756 static uint8_t last_base; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1757 |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1758 SStateList status; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1759 uint32_t timeout_in_seconds; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1760 uint32_t timeout_limit_Surface_in_seconds; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1761 _Bool InDiveMode = 0; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1762 |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1763 get_globalStateList(&status); |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1764 |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1765 if(stateUsed->mode == MODE_DIVE) |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1766 { |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1767 InDiveMode = 1; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1768 } |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1769 else |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1770 { |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1771 InDiveMode = 0; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1772 } |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1773 /* timeout control */ |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1774 if(RequestModeChange) ///< from RTE, set in data_exchange_main.c |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1775 time_without_button_pressed_deciseconds = (settingsGetPointer()->timeoutSurfacemode / 4) * 3; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1776 if(status.base != last_base) |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1777 time_without_button_pressed_deciseconds = 0; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1778 last_base = status.base; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1779 timeout_in_seconds = time_without_button_pressed_deciseconds / 10; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1780 time_without_button_pressed_deciseconds += 1; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1781 if(RequestModeChange || (timeout_in_seconds != time_without_button_pressed_deciseconds / 10)) |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1782 { |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1783 #ifdef NO_TIMEOUT |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1784 timeout_in_seconds = 0; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1785 #else |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1786 timeout_in_seconds += 1; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1787 #endif |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1788 |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1789 if(InDiveMode) |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1790 { |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1791 switch(status.base) |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1792 { |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1793 case BaseHome: |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1794 if((status.line != 0) && (timeout_in_seconds >= settingsGetPointer()->timeoutEnterButtonSelectDive)) |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1795 { |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1796 set_globalState(StD); |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1797 timeout_in_seconds = 0; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1798 } |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1799 break; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1800 |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1801 case BaseMenu: |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1802 if((status.line == 0) && ((timeout_in_seconds >= settingsGetPointer()->timeoutMenuDive) || RequestModeChange)) |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1803 { |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1804 exitMenu(); |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1805 timeout_in_seconds = 0; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1806 } |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1807 if((status.line != 0) && ((timeout_in_seconds >= settingsGetPointer()->timeoutMenuEdit) || RequestModeChange)) |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1808 { |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1809 exitMenuEdit_to_Home(); |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1810 timeout_in_seconds = 0; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1811 } |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1812 break; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1813 default: |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1814 break; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1815 } |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1816 } |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1817 else /* surface mode */ |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1818 { |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1819 switch(status.base) |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1820 { |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1821 case BaseHome: |
670
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1822 /* The RTE will mark a charge value as suspect after startup. Main know the update condition and may confirm that the value is most likely valid */ |
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1823 // if(!(stateRealGetPointer()->warnings.lowBattery) && ((stateRealGetPointer()->lifeData.battery_charge > 9) || (wasFirmwareUpdateCheckBattery))) |
422
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1824 { |
670
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1825 if(stateRealGetPointer()->lifeData.battery_charge < 0.0) |
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1826 { |
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1827 if(fabs(stateRealGetPointerWrite()->lastKnownBatteryPercentage - fabs(stateRealGetPointer()->lifeData.battery_charge)) < 1.0) |
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1828 { |
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1829 setBatteryPercentage(settingsGetPointer()->lastKnownBatteryPercentage); /* confirm that value provided by RTE is valid (maybe reset happened) */ |
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1830 } |
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1831 } |
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1832 else |
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1833 { |
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1834 if(!(stateRealGetPointer()->warnings.lowBattery) && (stateRealGetPointer()->lifeData.battery_charge > 9)) |
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1835 { |
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1836 stateRealGetPointerWrite()->lastKnownBatteryPercentage = stateRealGetPointer()->lifeData.battery_charge; |
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1837 } |
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1838 } |
422
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1839 } |
670
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1840 if((wasFirmwareUpdateCheckBattery) && (timeout_in_seconds > 3)) |
422
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1841 { |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1842 wasFirmwareUpdateCheckBattery = 0; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1843 setButtonResponsiveness(settingsGetPointer()->ButtonResponsiveness); // added 170306 |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1844 if( (settingsGetPointer()->lastKnownBatteryPercentage > 0) |
670
7a352b449055
Reduce display brightness in case the charger is connected:
Ideenmodellierer
parents:
662
diff
changeset
|
1845 && (settingsGetPointer()->lastKnownBatteryPercentage <= 101.0) |
422
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1846 && (stateRealGetPointer()->warnings.lowBattery)) |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1847 { |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1848 setBatteryPercentage(settingsGetPointer()->lastKnownBatteryPercentage); |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1849 } |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1850 } |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1851 // stuff before and new @161121 CCR-sensor limit 10 minutes |
662 | 1852 if(isLoopMode(settingsGetPointer()->dive_mode) && (settingsGetPointer()->CCR_Mode == CCRMODE_Sensors)) |
422
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1853 { |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1854 timeout_limit_Surface_in_seconds = settingsGetPointer()->timeoutSurfacemodeWithSensors; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1855 } |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1856 else |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1857 { |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1858 timeout_limit_Surface_in_seconds = settingsGetPointer()->timeoutSurfacemode; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1859 } |
805
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
776
diff
changeset
|
1860 if (timeout_in_seconds >= timeout_limit_Surface_in_seconds) { |
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
776
diff
changeset
|
1861 if (t7_isTimerRunning(true)) { |
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
776
diff
changeset
|
1862 // Delay sleep until the timer has elapsed |
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
776
diff
changeset
|
1863 timeout_in_seconds = timeout_limit_Surface_in_seconds - 1; |
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
776
diff
changeset
|
1864 } else { |
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
776
diff
changeset
|
1865 gotoSleep(); |
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
776
diff
changeset
|
1866 } |
422
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1867 } |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1868 break; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1869 case BaseMenu: |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1870 if((status.line == 0) && ((timeout_in_seconds >= settingsGetPointer()->timeoutMenuSurface) || RequestModeChange)) |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1871 { |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1872 exitMenu(); |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1873 timeout_in_seconds = 0; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1874 } |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1875 if((status.line != 0) && ((timeout_in_seconds >= settingsGetPointer()->timeoutMenuEdit) || RequestModeChange)) |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1876 { |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1877 if((status.page != (uint8_t)((StMPLAN >> 24) & 0x0F)) || (timeout_in_seconds >= 10*(settingsGetPointer()->timeoutMenuEdit))) |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1878 { |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1879 exitMenuEdit_to_Home(); |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1880 timeout_in_seconds = 0; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1881 } |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1882 } |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1883 break; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1884 |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1885 case BaseInfo: |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1886 if((timeout_in_seconds >= settingsGetPointer()->timeoutInfo) || RequestModeChange) |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1887 { |
718
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
1888 timeout_in_seconds = 0; |
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
1889 |
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
1890 switch(status.page) |
422
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1891 { |
718
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
1892 case InfoPageLogList: exitLog(); |
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
1893 break; |
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
1894 case InfoPageLogShow: show_logbook_exit(); |
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
1895 exitLog(); |
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
1896 break; |
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
1897 case InfoPageCompass: /* compass has individual timeout */ |
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
1898 break; |
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
1899 case InfoPageSensor: exitInfoToBack(); |
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
1900 break; |
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
1901 default: exitInfo(); |
b9f699d2e3d0
Updated menu structure to support new sensor information page:
Ideenmodellierer
parents:
697
diff
changeset
|
1902 break; |
422
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1903 } |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1904 } |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1905 break; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1906 default: |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1907 break; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1908 } |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1909 } |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1910 } |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1911 RequestModeChange = 0; |
b67327177159
Moved Timeout handling out of 100ms callback:
ideenmodellierer
parents:
412
diff
changeset
|
1912 } |
38 | 1913 // debugging by https://blog.feabhas.com/2013/02/developing-a-generic-hard-fault-handler-for-arm-cortex-m3cortex-m4/ |
1914 | |
1915 /* | |
1916 void printErrorMsg(const char * errMsg) | |
1917 { | |
1918 | |
1919 // printf(errMsg); | |
1920 // return; | |
1921 | |
1922 while(*errMsg != 0){ | |
1923 ITM_SendChar(*errMsg); | |
1924 ++errMsg; | |
1925 } | |
1926 } | |
1927 | |
1928 enum { r0, r1, r2, r3, r12, lr, pc, psr}; | |
1929 | |
1930 void stackDump(uint32_t stack[]) | |
1931 { | |
1932 static char msg[80]; | |
1933 sprintf(msg, "r0 = 0x%08x\n", stack[r0]); printErrorMsg(msg); | |
1934 sprintf(msg, "r1 = 0x%08x\n", stack[r1]); printErrorMsg(msg); | |
1935 sprintf(msg, "r2 = 0x%08x\n", stack[r2]); printErrorMsg(msg); | |
1936 sprintf(msg, "r3 = 0x%08x\n", stack[r3]); printErrorMsg(msg); | |
1937 sprintf(msg, "r12 = 0x%08x\n", stack[r12]); printErrorMsg(msg); | |
1938 sprintf(msg, "lr = 0x%08x\n", stack[lr]); printErrorMsg(msg); | |
1939 sprintf(msg, "pc = 0x%08x\n", stack[pc]); printErrorMsg(msg); | |
1940 sprintf(msg, "psr = 0x%08x\n", stack[psr]); printErrorMsg(msg); | |
1941 } | |
1942 | |
1943 void printUsageErrorMsg(uint32_t CFSRValue) | |
1944 { | |
1945 printErrorMsg("Usage fault: "); | |
1946 CFSRValue >>= 16; // right shift to lsb | |
1947 if((CFSRValue & (1 << 9)) != 0) { | |
1948 printErrorMsg("Divide by zero\n"); | |
1949 } | |
1950 } | |
1951 | |
1952 void Hard_Fault_Handler()//uint32_t stack[]) | |
1953 { | |
1954 static char msg[80]; | |
1955 printErrorMsg("In Hard Fault Handler\n"); | |
1956 sprintf(msg, "SCB->HFSR = 0x%08x\n", SCB->HFSR); | |
1957 printErrorMsg(msg); | |
1958 if ((SCB->HFSR & (1 << 30)) != 0) { | |
1959 printErrorMsg("Forced Hard Fault\n"); | |
1960 sprintf(msg, "SCB->CFSR = 0x%08x\n", SCB->CFSR ); | |
1961 printErrorMsg(msg); | |
1962 if((SCB->CFSR & 0xFFFF0000) != 0) { | |
1963 printUsageErrorMsg(SCB->CFSR); | |
1964 } | |
1965 } | |
1966 __ASM volatile("BKPT #01"); | |
1967 while(1); | |
1968 } | |
1969 | |
1970 int my_store_of_MSP; | |
1971 | |
1972 void HardFault_Handler(void) | |
1973 { | |
1974 __asm ("MRS my_store_of_MSP, MSP"); | |
1975 Hard_Fault_Handler(); | |
1976 } | |
1977 */ | |
1978 | |
1979 /* | |
1980 __asm void HardFault_Handler(void) | |
1981 { | |
1982 TST lr, #4 // Test for MSP or PSP | |
1983 ITE EQ | |
1984 MRSEQ r0, MSP | |
1985 MRSNE r0, PSP | |
1986 B __cpp(Hard_Fault_Handler) | |
1987 } | |
1988 */ | |
1989 /* | |
1990 HardFault_Handler\ | |
1991 PROC | |
1992 EXPORT HardFault_Handler | |
1993 B . | |
1994 ENDP | |
1995 */ | |
1996 | |
1997 /* | |
1998 __asm int f(int i) | |
1999 { | |
2000 ADD i, i, #1 // error | |
2001 } | |
2002 | |
2003 EXPORT HardFault_Handler | |
2004 HardFault_Handler FUNCTION | |
2005 MRS r0, MSP | |
2006 B __cpp(Hard_Fault_Handler) | |
2007 ENDFUNC | |
2008 */ |