Mercurial > public > ostc4
annotate Small_CPU/Src/baseCPU2.c @ 656:3ccf13af4651
Added visualization of scrubber time:
The remaining scrubber timer may be displayed in minutes or percentage of maximum time (both countdown). The value is displayed in the lower left corner, the overview custom view in T7 display as well as in the O2 Monitor view of the T3 display.
| author | Ideenmodellierer |
|---|---|
| date | Sun, 25 Apr 2021 20:47:01 +0200 |
| parents | ebe3fc302ab8 |
| children | 9513a92b293b |
| rev | line source |
|---|---|
| 38 | 1 /** |
| 2 ****************************************************************************** | |
| 3 * @copyright heinrichs weikamp | |
| 4 * @file base.c including main() | |
| 5 * @author heinrichs weikamp gmbh | |
| 6 * @date 15-Aug-2014 | |
| 7 * @version V1.0.3 | |
| 8 * @since 21-Nov-2014 | |
| 9 * @brief The beginning of it all. main() is part of this. | |
| 10 * + Do the inits for hardware | |
| 11 * + Do the inits for sub-systems like menu, dive screen etc. | |
| 12 * + Start IRQs | |
| 13 * + Start MainTasks not in IRQs | |
| 14 * @bug | |
| 15 * @warning | |
| 16 @verbatim | |
| 17 ============================================================================== | |
|
286
733877ab87d9
Minor: Some Texts fixed, allign RTErequired* values with RTE firmware
heinrichsweikamp
parents:
280
diff
changeset
|
18 ##### What about hardware without 8 MHz oscillator ##### |
| 38 | 19 ============================================================================== |
| 20 [..] modify OTP Byte 1 at 0x1FFF7800 with ST-Link utility | |
| 21 | |
| 22 ============================================================================== | |
| 23 ##### Where is the RTE Firmware version ##### | |
| 24 ============================================================================== | |
| 25 [..] in baseCPU2.c <just here below :-> | |
| 26 | |
| 27 ============================================================================== | |
| 28 ##### What to do with the RTE Firmware version ##### | |
| 29 ============================================================================== | |
| 30 [..] change the values RTErequiredHigh and RTErequiredLow in settings.c | |
| 31 to start warning via the firmware if not updated | |
| 32 | |
| 33 ============================================================================== | |
| 34 ##### What it does ##### | |
| 35 ============================================================================== | |
|
286
733877ab87d9
Minor: Some Texts fixed, allign RTErequired* values with RTE firmware
heinrichsweikamp
parents:
280
diff
changeset
|
36 [..] All realtime stuff and all what has to be done during sleep |
| 38 | 37 |
| 38 [..] RealTimeClock. The entire time and date handling (including divetime) | |
| 39 [..] Hardware control for pressure sensor, compass, battery monitor | |
| 40 [..] Calculations of tissue load, critical radius, otu, cns | |
| 41 [..] Switching off the power of the main CPU after request from it. | |
| 42 | |
| 43 ============================================================================== | |
| 44 ##### IRQs ##### | |
| 45 ============================================================================== | |
| 46 [..] The IRQs are are only used for SystemTick and SPI TransferComplete after | |
| 47 DMA data reception. | |
| 48 | |
| 49 [..] HAL_SPI_TxRxCpltCallback() restarts DMA and will call | |
| 50 scheduleSpecial_Evaluate_DataSendToSlave() only if it is not blocked | |
|
239
e4207f0aaa4b
cleanup: factor out dataSendToSlaveStopEval
Jan Mulder <jlmulder@xs4all.nl>
parents:
207
diff
changeset
|
51 by I2C. |
| 38 | 52 If the evaluation is blocked it has to be tested and executed afterwards. |
| 53 I2C is executed _without_ the usage of interrupts. | |
| 54 | |
| 55 ============================================================================== | |
| 56 ##### Main loop ##### | |
| 57 ============================================================================== | |
| 58 [..] is a combination of the while loop below in main.c and code in scheduler.c | |
| 59 It is similar to the DR5 code / logic - in contrast to the main CPU | |
| 60 Switching the state is done via global.mode | |
| 61 The loops in scheduler all run in the main execution thread without | |
| 62 any job stacks (like it was in the DR5). | |
| 63 | |
| 64 ============================================================================== | |
| 65 ##### Real Time Clock ##### | |
| 66 ============================================================================== | |
|
286
733877ab87d9
Minor: Some Texts fixed, allign RTErequired* values with RTE firmware
heinrichsweikamp
parents:
280
diff
changeset
|
67 The RTC is a separate part of hardware inside the CPU and is not affected |
| 38 | 68 by reset. Only power-on reset does change something. |
| 69 This is fine but the RTC is vital for the Sleep mode as Wakeuptimer. | |
| 70 This is the only date/time system in the OSTC. The main CPU is passive. | |
|
286
733877ab87d9
Minor: Some Texts fixed, allign RTErequired* values with RTE firmware
heinrichsweikamp
parents:
280
diff
changeset
|
71 Data transfer is done with localtime_rtc_tr and localtime_rtc_dr |
| 38 | 72 in HAL_RTC format to the main CPU and as HAL_RTC structs the way back for |
| 73 setting the actual time and date. | |
| 74 The RTC unit has 20 Byte of V_bat powered SRAM. It could be used | |
|
286
733877ab87d9
Minor: Some Texts fixed, allign RTErequired* values with RTE firmware
heinrichsweikamp
parents:
280
diff
changeset
|
75 for something useful in both CPUs. |
| 38 | 76 |
| 77 ============================================================================== | |
| 78 ##### File system ##### | |
| 79 ============================================================================== | |
| 80 [..] some files are used for both CPUs, like decom.c/.h, data_central.h, ... | |
| 81 | |
| 82 | |
| 83 ============================================================================== | |
| 84 ##### Unique device ID register (96 bits) ##### | |
| 85 ============================================================================== | |
| 86 [..] some files are used for both CPUs, like decom.c/.h, data_central.h, ... | |
| 87 | |
| 88 | |
| 89 ============================================================================== | |
| 90 ##### I2C ##### | |
| 91 ============================================================================== | |
| 92 [..] used for pressure, compass, (accelerator) and battery gauge | |
| 93 main cpu and pic (button) is spi | |
| 94 | |
| 95 | |
| 96 ============================================================================== | |
| 97 ##### Firmware Update Info ##### | |
| 98 ============================================================================== | |
| 99 V0.85 160531 scheduleCheck_pressure_reached_dive_mode_level() changes | |
|
286
733877ab87d9
Minor: Some Texts fixed, allign RTErequired* values with RTE firmware
heinrichsweikamp
parents:
280
diff
changeset
|
100 160606 global.no_fly_time_minutes is at least 24h after the dive |
| 38 | 101 160613 ambient light fixed |
| 102 160720 compass calib to Flash (8000 writes max. as erase has problems) | |
| 103 160829 do not reset main CPU on power on! | |
| 104 V0.91 161018 pressure_calculation_AN520_004_mod_MS5803_30BA__09_2015(); | |
| 105 V0.92+ 161020 global.sensorError[MAX_SENSORS] | |
| 106 fix missing init_pressure(); at powerUp of RTE | |
| 107 added HAL_StatusTypeDef for many functions in pressure.c | |
| 108 161024 no_fly_time_minutes Backup FIX | |
| 109 seconds_since_last_dive now related to RTC clock | |
| 110 161121 close to surface starts at 1 meter below last known surface pressure | |
|
286
733877ab87d9
Minor: Some Texts fixed, allign RTErequired* values with RTE firmware
heinrichsweikamp
parents:
280
diff
changeset
|
111 161121 in surface mode dive mode starts @1 mtr difference if surface 880 hPa instead of 700 hPa before |
| 38 | 112 V0.97+ 170213 added global.dataSendToSlave.diveModeInfo for DIVEMODE_Apnea |
| 113 added global.dataSendToSlave.setEndDive | |
| 114 DIVEMODE_Apnea special in scheduler.c (ticksdiff >= 1000) -> no tissue, cns, otu, no change in noFly Time etc. | |
| 115 V0.99 170320 new HAL Driver Repository | |
| 116 V1.01 170509 old HAL Driver Repository | |
| 117 | |
| 118 @endverbatim | |
| 119 ****************************************************************************** | |
| 120 * @attention | |
| 121 * | |
| 122 * <h2><center>© COPYRIGHT(c) 2017 heinrichs weikamp</center></h2> | |
| 123 * | |
| 124 ****************************************************************************** | |
| 125 */ | |
| 126 | |
| 127 //#define DEBUG_PIN_ACTIVE | |
| 128 /* Includes ------------------------------------------------------------------*/ | |
| 129 | |
| 130 #include "baseCPU2.h" | |
| 131 | |
| 132 // From Small_CPU/Inc: | |
| 133 #include "dma.h" | |
| 134 #include "i2c.h" | |
| 135 #include "spi.h" | |
| 136 #include "rtc.h" | |
| 137 #include "adc.h" | |
| 138 #include "compass.h" | |
| 139 #include "pressure.h" | |
| 140 #include "batteryGasGauge.h" | |
| 141 #include "batteryCharger.h" | |
| 142 #include "scheduler.h" | |
| 143 #include "tm_stm32f4_otp.h" | |
|
554
3328189786e7
Added external ADC interface functionality (MCP3424):
Ideenmodellierer
parents:
533
diff
changeset
|
144 #include "externalInterface.h" |
| 38 | 145 |
| 146 // From Common/Inc: | |
| 147 #include "calc_crush.h" | |
| 148 #include "decom.h" | |
| 149 #include "FirmwareData.h" | |
| 150 | |
| 151 // From Common/Drivers/ | |
| 152 #include "stm32f4xx_hal.h" | |
| 153 #include <stdio.h> | |
| 154 | |
| 433 | 155 uint8_t coldstart __attribute__((section (".noinit"))); |
| 156 | |
| 89 | 157 uint8_t hasExternalClock(void) { |
| 158 if ((TM_OTP_Read(0, 0) > 0) && (TM_OTP_Read(0, 0) < 0xFF)) | |
| 159 return 1; | |
| 160 else | |
| 161 return 0; | |
| 38 | 162 } |
| 163 | |
| 164 // SHALL LOAD AT 0x08000000 + 0x00005000 = 0x08005000. | |
| 165 // See CPU2-RTE.ld | |
| 100 | 166 const SFirmwareData cpu2_FirmwareData __attribute__(( section(".firmware_data") ))= { |
|
341
591c03a1e68d
change max. allowed surface pressure to 1030hPa (As in the small OSTC)
heinrichsweikamp
parents:
339
diff
changeset
|
167 .versionFirst = 2, |
| 644 | 168 .versionSecond = 7, |
|
280
ae27d6185d51
Make RTE show as 1.8.0 beta, add update files for testing purposes
heinrichsweikamp
parents:
274
diff
changeset
|
169 .versionThird = 0, |
|
286
733877ab87d9
Minor: Some Texts fixed, allign RTErequired* values with RTE firmware
heinrichsweikamp
parents:
280
diff
changeset
|
170 .versionBeta = 0, |
| 38 | 171 |
| 89 | 172 /* 4 bytes with trailing 0 */ |
| 100 | 173 .signature = "mh", |
| 38 | 174 |
| 606 | 175 .release_year = 21, |
| 644 | 176 .release_month = 3, |
| 177 .release_day = 30, | |
| 100 | 178 .release_sub = 0, |
| 38 | 179 |
| 89 | 180 /* max 48 with trailing 0 */ |
| 181 //release_info ="12345678901234567890123456789012345678901" | |
| 356 | 182 .release_info = "stable Nov'19", |
| 38 | 183 |
| 89 | 184 /* for safety reasons and coming functions */ |
| 185 .magic[0] = FIRMWARE_MAGIC_FIRST, .magic[1] = FIRMWARE_MAGIC_SECOND, | |
| 186 .magic[2] = FIRMWARE_MAGIC_CPU2_RTE, /* the magic byte for RTE */ | |
| 433 | 187 .magic[3] = FIRMWARE_MAGIC_END |
| 188 }; | |
| 189 | |
| 38 | 190 |
| 89 | 191 uint8_t firmwareVersionHigh(void) { |
| 192 return cpu2_FirmwareData.versionFirst; | |
| 38 | 193 } |
| 194 | |
| 89 | 195 uint8_t firmwareVersionLow(void) { |
| 196 return cpu2_FirmwareData.versionSecond; | |
| 38 | 197 } |
| 198 | |
| 199 /** @addtogroup OSTC4 | |
| 200 * @{ | |
| 201 */ | |
| 202 | |
| 203 /** @addtogroup CPU2 | |
| 204 * @{ | |
| 205 */ | |
| 206 | |
| 207 /* Private typedef -----------------------------------------------------------*/ | |
| 208 /* Private define ------------------------------------------------------------*/ | |
| 209 #define BUTTON_OSTC_GPIO_PIN GPIO_PIN_0 | |
| 210 #define BUTTON_OSTC_GPIO_PORT GPIOA | |
| 211 #define BUTTON_OSTC_HAL_RCC_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() | |
| 212 #define BUTTON_OSTC_IRQn EXTI0_IRQn | |
| 213 | |
| 214 #define BUTTON_TEST_GPIO_PIN GPIO_PIN_3 | |
| 215 #define BUTTON_TEST_GPIO_PORT GPIOA | |
| 216 #define BUTTON_TEST_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE() | |
| 217 #define BUTTON_TEST_IRQn EXTI3_IRQn | |
| 218 | |
| 219 #define WIRELSS_RISING_GPIO_PIN GPIO_PIN_1 | |
| 220 #define WIRELSS_RISING_GPIO_PORT GPIOA | |
| 221 #define WIRELSS_RISING_HAL_RCC_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() | |
| 222 #define WIRELSS_RISING_IRQn EXTI1_IRQn | |
| 223 | |
| 224 #define WIRELSS_FALLING_GPIO_PIN GPIO_PIN_2 | |
| 225 #define WIRELSS_FALLING_GPIO_PORT GPIOA | |
| 226 #define WIRELSS_FALLING_HAL_RCC_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() | |
| 227 #define WIRELSS_FALLING_IRQn EXTI2_IRQn | |
| 228 | |
| 229 #define WIRELSS_POWER_GPIO_PIN GPIO_PIN_12 | |
| 230 #define WIRELSS_POWER_GPIO_PORT GPIOB | |
| 231 #define WIRELSS_POWER_HAL_RCC_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() | |
| 232 | |
| 233 /* Private macro -------------------------------------------------------------*/ | |
| 234 | |
| 235 /* Private variables ---------------------------------------------------------*/ | |
| 236 uint32_t global_test_time_counter = 0; | |
| 237 SBackup backup; | |
| 238 | |
| 239 /* Private function prototypes -----------------------------------------------*/ | |
| 240 static void EXTI_Wakeup_Button_Init(void); | |
| 241 static void EXTI_Wakeup_Button_DeInit(void); | |
| 242 | |
| 243 static void EXTI_Test_Button_Init(void); | |
| 244 static void EXTI_Test_Button_DeInit(void); | |
| 245 | |
| 246 static void GPIO_LED_Init(void); | |
| 247 static void GPIO_Power_MainCPU_Init(void); | |
| 248 static void GPIO_Power_MainCPU_ON(void); | |
| 249 static void GPIO_Power_MainCPU_OFF(void); | |
| 250 | |
| 183 | 251 #ifdef DEBUG_I2C_LINES |
| 38 | 252 void GPIO_test_I2C_lines(void); |
| 183 | 253 #endif |
| 38 | 254 |
| 255 void sleep_prepare(void); | |
| 256 | |
| 257 void SystemClock_Config(void); | |
| 258 void SystemClock_Config_HSI(void); | |
| 259 void SystemClock_Config_HSE(void); | |
| 260 void SYSCLKConfig_STOP_HSI(void); | |
| 261 void SYSCLKConfig_STOP_HSE(void); | |
| 262 | |
| 263 void GPIO_new_DEBUG_Init(void); | |
| 264 void GPIO_new_DEBUG_LOW(void); | |
| 265 void GPIO_new_DEBUG_HIGH(void); | |
| 266 | |
| 267 #define REGULAR_RUN | |
| 268 | |
| 89 | 269 int __io_putchar(int ch) { |
| 270 ITM_SendChar(ch); | |
| 271 return ch; | |
| 38 | 272 } |
| 273 | |
| 274 /* Private functions ---------------------------------------------------------*/ | |
| 275 | |
| 276 /** | |
| 277 * @brief Main program | |
| 278 * @param None | |
| 279 * @retval None | |
| 280 */ | |
| 120 | 281 /* #define DEBUG_RUNTIME TRUE */ |
| 282 #ifdef DEBUG_RUNTIME | |
| 283 #define MEASURECNT 60 /* number of measuremets to be stored */ | |
| 284 static uint32_t loopcnt[MEASURECNT]; | |
| 285 extern RTC_HandleTypeDef RTCHandle; | |
| 286 #endif | |
| 38 | 287 |
| 89 | 288 int main(void) { |
| 120 | 289 |
| 290 #ifdef DEBUG_RUNTIME | |
| 291 RTC_TimeTypeDef Stime; | |
| 292 uint8_t measurementindex = 0; | |
| 293 uint8_t lastsecond = 0xFF; | |
| 294 #endif | |
| 295 | |
| 89 | 296 HAL_Init(); |
| 297 SystemClock_Config(); | |
| 38 | 298 |
| 89 | 299 HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq() / 1000); |
| 300 HAL_SYSTICK_CLKSourceConfig( SYSTICK_CLKSOURCE_HCLK); | |
| 301 HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0); | |
| 38 | 302 |
| 89 | 303 MX_RTC_init(); |
| 304 GPIO_LED_Init(); | |
| 305 GPIO_new_DEBUG_Init(); // added 170322 hw | |
| 306 initGlobals(); | |
| 38 | 307 |
| 120 | 308 /* printf("CPU2-RTE running...\n"); */ |
| 38 | 309 |
| 329 | 310 HAL_Delay(100); |
| 311 | |
| 89 | 312 MX_I2C1_Init(); |
| 329 | 313 if (global.I2C_SystemStatus != HAL_OK) |
| 314 { | |
| 89 | 315 if (MX_I2C1_TestAndClear() == GPIO_PIN_RESET) { |
| 316 MX_I2C1_TestAndClear(); // do it a second time | |
| 317 } | |
|
488
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
473
diff
changeset
|
318 HAL_Delay(100); |
|
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
473
diff
changeset
|
319 I2C_DeInit(); |
|
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
473
diff
changeset
|
320 HAL_Delay(100); |
| 89 | 321 MX_I2C1_Init(); |
|
488
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
473
diff
changeset
|
322 HAL_Delay(100); |
| 89 | 323 } |
| 38 | 324 |
| 329 | 325 |
| 326 | |
| 89 | 327 //dangerous: TM_OTP_Write(0,0, 0x01); |
| 38 | 328 #ifdef REGULAR_RUN |
| 89 | 329 global.sensorError[SENSOR_PRESSURE_ID] = init_pressure(); |
| 330 global.I2C_SystemStatus = global.sensorError[SENSOR_PRESSURE_ID]; | |
| 329 | 331 if (global.I2C_SystemStatus != HAL_OK) |
| 332 { | |
| 89 | 333 if (MX_I2C1_TestAndClear() == GPIO_PIN_RESET) { |
| 334 MX_I2C1_TestAndClear(); // do it a second time | |
| 335 } | |
|
488
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
473
diff
changeset
|
336 HAL_Delay(100); |
|
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
473
diff
changeset
|
337 I2C_DeInit(); |
|
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
473
diff
changeset
|
338 HAL_Delay(100); |
| 89 | 339 MX_I2C1_Init(); |
|
488
9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
heinrichsweikamp
parents:
473
diff
changeset
|
340 HAL_Delay(100); |
| 89 | 341 global.sensorError[SENSOR_PRESSURE_ID] = init_pressure(); |
| 342 global.I2C_SystemStatus = global.sensorError[SENSOR_PRESSURE_ID]; | |
| 343 } | |
| 38 | 344 |
| 89 | 345 global.dataSendToMaster.sensorErrors = |
| 346 global.sensorError[SENSOR_PRESSURE_ID]; | |
| 329 | 347 |
| 348 if(is_init_pressure_done()) | |
| 349 { | |
|
339
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
334
diff
changeset
|
350 init_surface_ring(0); |
| 329 | 351 } |
| 89 | 352 init_battery_gas_gauge(); |
| 353 HAL_Delay(10); | |
| 354 battery_gas_gauge_get_data(); | |
|
473
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
355 |
|
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
356 MX_SPI3_Init(); |
|
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
357 |
|
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
358 if(coldstart != 0xA5) /* Not reading a 0xA5 means the memory cells has not been initialized before => cold start */ |
| 433 | 359 { |
| 360 coldstart = 0xA5; | |
| 361 battery_gas_gauge_set(0); | |
|
473
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
362 global.dataSendToMaster.power_on_reset = 1; |
|
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
363 global.deviceDataSendToMaster.power_on_reset = 1; |
|
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
364 |
|
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
365 if (!scheduleSetButtonResponsiveness()) |
|
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
366 { |
|
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
367 HAL_Delay(1); |
|
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
368 if (!scheduleSetButtonResponsiveness()) // send again, if problem it's not my problem here. |
|
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
369 { |
|
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
370 HAL_Delay(1); |
|
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
371 scheduleSetButtonResponsiveness(); // init |
|
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
372 HAL_Delay(1); |
|
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
373 } |
|
edfc1a464b42
Do not signal power on reset in case of a "warm" reset:
ideenmodellierer
parents:
439
diff
changeset
|
374 } |
| 433 | 375 } |
| 38 | 376 |
| 89 | 377 global.lifeData.battery_voltage = get_voltage(); |
| 378 global.lifeData.battery_charge = get_charge(); | |
| 379 copyBatteryData(); | |
| 38 | 380 |
| 89 | 381 ADCx_Init(); |
| 382 GPIO_Power_MainCPU_Init(); | |
| 383 global.mode = MODE_POWERUP; | |
| 38 | 384 #else |
| 89 | 385 init_pressure(); |
|
339
37f45300bc2e
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
ideenmodellierer
parents:
334
diff
changeset
|
386 init_surface_ring(0); |
| 38 | 387 |
| 89 | 388 ADCx_Init(); |
| 389 GPIO_Power_MainCPU_Init(); | |
| 390 global.mode = MODE_TEST; | |
| 38 | 391 #endif |
| 89 | 392 while (1) { |
| 120 | 393 /* printf("Global mode = %d\n", global.mode); */ |
| 38 | 394 |
| 89 | 395 switch (global.mode) { |
| 396 case MODE_POWERUP: | |
| 397 case MODE_BOOT: | |
| 398 // ReInit_battery_charger_status_pins(); | |
| 399 compass_init(0, 7); | |
| 400 accelerator_init(); | |
|
554
3328189786e7
Added external ADC interface functionality (MCP3424):
Ideenmodellierer
parents:
533
diff
changeset
|
401 externalInterface_Init(); |
| 181 | 402 |
| 89 | 403 if (global.mode == MODE_BOOT) { |
| 404 GPIO_Power_MainCPU_OFF(); | |
| 405 HAL_Delay(100); // for GPIO_Power_MainCPU_ON(); | |
| 406 GPIO_Power_MainCPU_ON(); | |
| 407 } | |
| 408 SPI_synchronize_with_Master(); | |
| 409 MX_DMA_Init(); | |
| 410 MX_SPI1_Init(); | |
|
134
0586ae83a243
Removed cyclic (by timer) send on slave side
Ideenmodellierer
parents:
120
diff
changeset
|
411 SPI_Start_single_TxRx_with_Master(); /* be prepared for the first data exchange */ |
| 207 | 412 Scheduler_Request_sync_with_SPI(SPI_SYNC_METHOD_HARD); |
| 89 | 413 EXTI_Test_Button_Init(); |
| 414 global.mode = MODE_SURFACE; | |
| 415 break; | |
| 38 | 416 |
| 89 | 417 case MODE_CALIB: |
| 90 | 418 scheduleCompassCalibrationMode(); |
| 89 | 419 break; |
| 420 | |
| 421 case MODE_SURFACE: | |
| 422 scheduleSurfaceMode(); | |
| 423 break; | |
| 38 | 424 |
| 89 | 425 case MODE_TEST: |
| 426 break; | |
| 38 | 427 |
| 89 | 428 case MODE_DIVE: |
| 90 | 429 backup.no_fly_time_minutes = global.no_fly_time_minutes; |
| 430 backup.seconds_since_last_dive = global.seconds_since_last_dive; | |
| 431 | |
| 432 vpm_init( &global.vpm, global.conservatism, global.repetitive_dive, | |
| 433 global.seconds_since_last_dive ); | |
| 434 global.no_fly_time_minutes = 0; | |
| 435 global.lifeData.dive_time_seconds = 0; | |
| 436 global.lifeData.dive_time_seconds_without_surface_time = 0; | |
| 437 scheduleDiveMode(); | |
| 438 // done now in scheduler prior to change mode: global.seconds_since_last_dive = 1; | |
| 439 | |
| 440 if( global.lifeData.dive_time_seconds > 60 ) | |
| 441 { | |
| 442 //No Fly time 60% of desaturationtime after dive | |
| 443 global.no_fly_time_minutes = decom_calc_desaturation_time( | |
| 444 global.lifeData.tissue_nitrogen_bar, | |
| 445 global.lifeData.tissue_helium_bar, | |
| 446 global.lifeData.pressure_surface_bar ) * 60 / 100; | |
| 447 if( global.no_fly_time_minutes < (24 * 60) ) | |
| 448 global.no_fly_time_minutes = 24 * 60; | |
| 449 } | |
| 450 else | |
| 451 { | |
| 452 global.no_fly_time_minutes = backup.no_fly_time_minutes; | |
| 453 global.seconds_since_last_dive = backup.seconds_since_last_dive; | |
| 454 } | |
| 455 | |
| 456 global.lifeData.dive_time_seconds = 0; | |
| 457 global.lifeData.dive_time_seconds_without_surface_time = 0; | |
| 458 global.lifeData.counterSecondsShallowDepth = 0; | |
| 459 | |
| 460 backup.no_fly_time_minutes = 0; | |
| 461 backup.seconds_since_last_dive = 0; | |
| 89 | 462 break; |
| 38 | 463 |
| 89 | 464 case MODE_SHUTDOWN: |
| 465 HAL_Delay(200); | |
| 466 global.mode = MODE_SLEEP; | |
| 467 MX_SPI3_Init(); | |
| 468 break; | |
| 469 | |
| 470 case MODE_SLEEP: | |
| 471 /* | |
| 472 sleep_prepare(); | |
| 473 scheduleSleepMode_test(); | |
| 474 */ | |
| 475 /* | |
| 476 GPIO_Power_MainCPU_OFF(); | |
| 477 EXTI_Test_Button_DeInit(); | |
| 478 EXTI_Wakeup_Button_Init(); | |
| 479 NOT_USED_AT_THE_MOMENT_scheduleSleepMode(); | |
| 480 */ | |
| 481 EXTI_Test_Button_DeInit(); | |
| 482 if (hasExternalClock()) | |
| 483 SystemClock_Config_HSI(); | |
| 484 sleep_prepare(); | |
| 38 | 485 |
| 89 | 486 GPIO_LED_Init(); |
| 38 | 487 |
| 89 | 488 scheduleSleepMode(); |
| 489 if (hasExternalClock()) | |
| 490 SystemClock_Config_HSE(); | |
| 491 GPIO_LED_Init(); | |
| 492 EXTI_Wakeup_Button_DeInit(); | |
| 493 ADCx_Init(); | |
| 494 GPIO_Power_MainCPU_Init(); | |
| 495 GPIO_Power_MainCPU_ON(); | |
| 496 compass_init(0, 7); | |
| 497 accelerator_init(); | |
|
148
ee744c7160ce
Use SPI TX callback to synchronize to main CPU
Ideenmodellierer
parents:
134
diff
changeset
|
498 SPI_synchronize_with_Master(); |
| 89 | 499 MX_DMA_Init(); |
| 500 MX_SPI1_Init(); | |
|
148
ee744c7160ce
Use SPI TX callback to synchronize to main CPU
Ideenmodellierer
parents:
134
diff
changeset
|
501 SPI_Start_single_TxRx_with_Master(); |
| 89 | 502 |
| 503 // EXTILine0_Button_DeInit(); not now, later after testing | |
| 504 break; | |
| 505 } | |
| 120 | 506 |
| 507 #ifdef DEBUG_RUNTIME | |
| 508 HAL_RTC_GetTime(&RTCHandle, &Stime, RTC_FORMAT_BCD); | |
| 509 | |
| 510 if(lastsecond == 0xFF) | |
| 511 { | |
| 512 measurementindex = 0; | |
| 513 loopcnt[measurementindex] = 0; | |
| 514 lastsecond = Stime.Seconds; | |
| 515 } | |
| 516 loopcnt[measurementindex]++; | |
| 517 | |
| 518 if(lastsecond != Stime.Seconds) | |
| 519 { | |
| 520 measurementindex++; | |
| 521 if (measurementindex == MEASURECNT) measurementindex = 0; | |
| 522 loopcnt[measurementindex] = 0; | |
| 523 lastsecond = Stime.Seconds; | |
| 524 if(measurementindex +1 < MEASURECNT) loopcnt[measurementindex +1] = 0xffff; /* helps to identify the latest value */ | |
| 525 } | |
| 526 #endif | |
| 89 | 527 } |
| 38 | 528 } |
| 529 | |
| 530 /** @brief Button feedback - EXTI line detection callbacks | |
| 531 * @param GPIO_Pin: Specifies the pins connected EXTI line | |
| 532 * @retval None | |
| 533 */ | |
| 89 | 534 void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) { |
| 38 | 535 |
| 89 | 536 if (GPIO_Pin == BUTTON_OSTC_GPIO_PIN) { |
| 537 if (global.mode == MODE_SLEEP) { | |
| 538 global.mode = MODE_BOOT; | |
| 539 } | |
| 540 } | |
| 541 else | |
| 542 if (GPIO_Pin == BUTTON_TEST_GPIO_PIN) { | |
| 543 if (!global.demo_mode && (global.mode == MODE_SURFACE)) { | |
| 544 global.demo_mode = 1; | |
| 545 global.mode = MODE_DIVE; | |
| 546 } else if (global.demo_mode && (global.mode == MODE_DIVE) | |
| 547 && (global.lifeData.dive_time_seconds > 10)) { | |
| 548 global.demo_mode = 0; | |
| 549 global.dataSendToMaster.mode = MODE_ENDDIVE; | |
| 550 global.deviceDataSendToMaster.mode = MODE_ENDDIVE; | |
| 551 } | |
| 552 } | |
| 38 | 553 } |
| 554 | |
| 555 /** | |
| 556 * @brief System Clock Configuration | |
| 557 * The system Clock is configured as follow : | |
| 558 * System Clock source = PLL (HSI) | |
| 559 * SYSCLK(Hz) = 100 MHz | |
| 560 * HCLK(Hz) = 100 MHz | |
| 561 * AHB Prescaler = 1 | |
| 562 * APB1 Prescaler = 2 | |
| 563 * APB2 Prescaler = 1 | |
| 564 * HSI Frequency(Hz) = 16 MHz | |
| 565 * PLL_M = 16 | |
| 566 * PLL_N = 400 | |
| 567 * PLL_P = 4 | |
| 568 * PLL_Q = 7 // no USB | |
| 569 * VDD(V) = 3.3 | |
| 570 * Main regulator output voltage = Scale1 mode | |
| 571 * Flash Latency(WS) = 3 | |
| 572 * @param None | |
| 573 * @retval None | |
| 574 */ | |
| 575 | |
| 89 | 576 void SystemClock_Config(void) { |
| 577 if (hasExternalClock()) | |
| 578 SystemClock_Config_HSE(); | |
| 579 else | |
| 580 SystemClock_Config_HSI(); | |
| 38 | 581 } |
| 582 | |
| 89 | 583 void SYSCLKConfig_STOP(void) { |
| 584 SYSCLKConfig_STOP_HSI(); | |
| 38 | 585 } |
| 586 | |
| 89 | 587 void SystemClock_Config_HSE(void) { |
| 588 RCC_OscInitTypeDef RCC_OscInitStruct; | |
| 589 RCC_ClkInitTypeDef RCC_ClkInitStruct; | |
| 38 | 590 // RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; |
| 591 | |
| 89 | 592 __PWR_CLK_ENABLE(); // is identical to __HAL_RCC_PWR_CLK_ENABLE(); |
| 38 | 593 |
| 89 | 594 __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2); |
| 38 | 595 |
| 89 | 596 RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; //|RCC_OSCILLATORTYPE_LSE; |
| 597 RCC_OscInitStruct.HSEState = RCC_HSE_ON; | |
| 598 //RCC_OscInitStruct.LSEState = RCC_LSE_ON; | |
| 599 RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; | |
| 600 RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; | |
| 601 RCC_OscInitStruct.PLL.PLLM = 8; | |
| 602 RCC_OscInitStruct.PLL.PLLN = 320; | |
| 603 RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; | |
| 604 RCC_OscInitStruct.PLL.PLLQ = 4; | |
| 605 HAL_RCC_OscConfig(&RCC_OscInitStruct); | |
| 38 | 606 |
| 89 | 607 RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK |
| 608 | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; | |
| 609 RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; | |
| 610 RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; | |
| 611 RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; | |
| 612 RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; | |
| 613 HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); | |
| 38 | 614 |
| 615 // PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC; | |
| 616 // PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE; | |
| 617 // HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); | |
| 618 | |
| 619 // HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq()/1000); | |
| 620 | |
| 621 // HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK); | |
| 622 | |
| 89 | 623 /* SysTick_IRQn interrupt configuration */ |
| 38 | 624 // HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0); |
| 625 } | |
| 626 | |
| 89 | 627 void SystemClock_Config_HSI(void) { |
| 628 RCC_ClkInitTypeDef RCC_ClkInitStruct; | |
| 629 RCC_OscInitTypeDef RCC_OscInitStruct; | |
| 38 | 630 |
| 89 | 631 /* Enable Power Control clock */ |
| 632 __HAL_RCC_PWR_CLK_ENABLE(); | |
| 38 | 633 |
| 89 | 634 /* The voltage scaling allows optimizing the power consumption when the device is |
| 635 clocked below the maximum system frequency, to update the voltage scaling value | |
| 636 regarding system frequency refer to product datasheet. */ | |
| 637 __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2); | |
| 38 | 638 |
| 89 | 639 /* Enable HSI Oscillator and activate PLL with HSI as source */ |
| 640 RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; | |
| 641 RCC_OscInitStruct.HSIState = RCC_HSI_ON; | |
| 642 RCC_OscInitStruct.HSICalibrationValue = 0x10; | |
| 643 RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; | |
| 644 RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; | |
| 645 RCC_OscInitStruct.PLL.PLLM = 16; | |
| 646 RCC_OscInitStruct.PLL.PLLN = 320; | |
| 647 RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; | |
| 648 RCC_OscInitStruct.PLL.PLLQ = 4; | |
| 649 HAL_RCC_OscConfig(&RCC_OscInitStruct); | |
| 38 | 650 |
| 89 | 651 /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 |
| 652 clocks dividers */ | |
| 653 RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | |
| 654 | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); | |
| 655 RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; | |
| 656 RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; | |
| 657 RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; | |
| 658 RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; | |
| 659 HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); | |
| 38 | 660 } |
| 661 /* | |
| 662 RCC_OscInitTypeDef RCC_OscInitStruct; | |
| 663 RCC_ClkInitTypeDef RCC_ClkInitStruct; | |
| 664 | |
| 665 __HAL_RCC_PWR_CLK_ENABLE(); | |
| 666 | |
| 667 //__PWR_CLK_ENABLE(); | |
| 668 | |
| 669 __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2); | |
| 670 | |
| 671 RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_LSE; | |
| 672 RCC_OscInitStruct.LSEState = RCC_LSE_ON; | |
| 673 RCC_OscInitStruct.HSIState = RCC_HSI_ON; | |
| 674 RCC_OscInitStruct.HSICalibrationValue = 16; | |
| 675 RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; | |
| 676 RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; | |
| 677 RCC_OscInitStruct.PLL.PLLM = 16; | |
| 678 RCC_OscInitStruct.PLL.PLLN = 320; | |
| 679 RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; | |
| 680 RCC_OscInitStruct.PLL.PLLQ = 4; | |
| 681 HAL_RCC_OscConfig(&RCC_OscInitStruct); | |
| 682 | |
| 683 RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK|RCC_CLOCKTYPE_PCLK1; | |
| 684 RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; | |
| 685 RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; | |
| 686 RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; | |
| 687 RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; | |
| 688 HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); | |
| 689 } | |
| 690 | |
| 691 static void RtcClock_Config(void) | |
| 692 { | |
| 693 RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; | |
| 694 PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC; | |
| 695 PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE; | |
| 696 HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); | |
| 697 } | |
| 698 */ | |
| 699 | |
| 700 /** | |
| 701 * @brief Configures system clock after wake-up from STOP: enable HSI, PLL | |
| 702 * and select PLL as system clock source. | |
| 703 * @param None | |
| 704 * @retval None | |
| 705 */ | |
| 89 | 706 void SYSCLKConfig_STOP_HSE(void) { |
| 707 RCC_ClkInitTypeDef RCC_ClkInitStruct; | |
| 708 RCC_OscInitTypeDef RCC_OscInitStruct; | |
| 709 uint32_t pFLatency = 0; | |
| 38 | 710 |
| 89 | 711 /* Get the Oscillators configuration according to the internal RCC registers */ |
| 712 HAL_RCC_GetOscConfig(&RCC_OscInitStruct); | |
| 38 | 713 |
| 89 | 714 /* After wake-up from STOP reconfigure the system clock: Enable HSI and PLL */ |
| 715 RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; | |
| 716 RCC_OscInitStruct.HSIState = RCC_HSE_ON; | |
| 717 RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; | |
| 718 HAL_RCC_OscConfig(&RCC_OscInitStruct); | |
| 38 | 719 |
| 89 | 720 /* Get the Clocks configuration according to the internal RCC registers */ |
| 721 HAL_RCC_GetClockConfig(&RCC_ClkInitStruct, &pFLatency); | |
| 38 | 722 |
| 89 | 723 /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 |
| 724 clocks dividers */ | |
| 725 RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK; | |
| 726 RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; | |
| 727 HAL_RCC_ClockConfig(&RCC_ClkInitStruct, pFLatency); | |
| 38 | 728 } |
| 729 | |
| 89 | 730 void SYSCLKConfig_STOP_HSI(void) { |
| 731 RCC_ClkInitTypeDef RCC_ClkInitStruct; | |
| 732 RCC_OscInitTypeDef RCC_OscInitStruct; | |
| 733 uint32_t pFLatency = 0; | |
| 38 | 734 |
| 89 | 735 /* Get the Oscillators configuration according to the internal RCC registers */ |
| 736 HAL_RCC_GetOscConfig(&RCC_OscInitStruct); | |
| 38 | 737 |
| 89 | 738 /* After wake-up from STOP reconfigure the system clock: Enable HSI and PLL */ |
| 739 RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; | |
| 740 RCC_OscInitStruct.HSIState = RCC_HSI_ON; | |
| 741 RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; | |
| 742 RCC_OscInitStruct.HSICalibrationValue = 0x10; | |
| 743 HAL_RCC_OscConfig(&RCC_OscInitStruct); | |
| 38 | 744 |
| 89 | 745 /* Get the Clocks configuration according to the internal RCC registers */ |
| 746 HAL_RCC_GetClockConfig(&RCC_ClkInitStruct, &pFLatency); | |
| 38 | 747 |
| 89 | 748 /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 |
| 749 clocks dividers */ | |
| 750 RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK; | |
| 751 RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; | |
| 752 HAL_RCC_ClockConfig(&RCC_ClkInitStruct, pFLatency); | |
| 38 | 753 } |
| 754 | |
| 755 /** | |
| 756 * @brief SYSTICK callback | |
| 757 * @param None | |
| 758 * @retval None | |
| 759 */ | |
| 89 | 760 void HAL_SYSTICK_Callback(void) { |
| 761 HAL_IncTick(); | |
| 38 | 762 } |
| 763 | |
| 764 /** | |
| 765 * @brief Configures GPIO for LED | |
| 766 * Might move with STM32Cube usage | |
| 767 * @param None | |
| 768 * @retval None | |
| 769 */ | |
| 770 /* | |
| 771 void GPIO_test_I2C_lines(void) | |
| 772 { | |
| 773 GPIO_InitTypeDef GPIO_InitStructure; | |
| 774 __GPIOB_CLK_ENABLE(); | |
| 775 GPIO_InitStructure.Pin = GPIO_PIN_8; | |
| 776 GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP; | |
| 777 GPIO_InitStructure.Pull = GPIO_PULLUP; | |
| 778 GPIO_InitStructure.Speed = GPIO_SPEED_LOW; | |
| 779 HAL_GPIO_Init(GPIOB, &GPIO_InitStructure); | |
| 780 GPIO_InitStructure.Pin = GPIO_PIN_9; | |
| 781 HAL_GPIO_Init(GPIOB, &GPIO_InitStructure); | |
| 782 | |
| 783 HAL_GPIO_WritePin(GPIOB,GPIO_PIN_8,GPIO_PIN_SET); | |
| 784 HAL_GPIO_WritePin(GPIOB,GPIO_PIN_9,GPIO_PIN_RESET); | |
| 785 HAL_Delay(10); | |
| 786 HAL_GPIO_WritePin(GPIOB,GPIO_PIN_9,GPIO_PIN_SET); | |
| 787 HAL_GPIO_WritePin(GPIOB,GPIO_PIN_8,GPIO_PIN_RESET); | |
| 788 HAL_Delay(10); | |
| 789 } | |
| 790 */ | |
| 791 | |
| 89 | 792 static void GPIO_LED_Init(void) { |
| 793 GPIO_InitTypeDef GPIO_InitStructure; | |
| 38 | 794 |
| 89 | 795 __GPIOC_CLK_ENABLE(); |
| 796 GPIO_InitStructure.Pin = GPIO_PIN_3; | |
| 797 GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP; | |
| 798 GPIO_InitStructure.Pull = GPIO_PULLUP; | |
| 799 GPIO_InitStructure.Speed = GPIO_SPEED_FAST; | |
| 800 HAL_GPIO_Init( GPIOC, &GPIO_InitStructure); | |
| 38 | 801 } |
| 802 | |
| 89 | 803 void GPIO_new_DEBUG_Init(void) { |
| 38 | 804 #ifdef DEBUG_PIN_ACTIVE |
| 89 | 805 GPIO_InitTypeDef GPIO_InitStructure; |
| 38 | 806 |
| 89 | 807 __GPIOC_CLK_ENABLE(); |
| 808 GPIO_InitStructure.Pin = GPIO_PIN_3; | |
| 809 GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP; | |
| 810 GPIO_InitStructure.Pull = GPIO_PULLUP; | |
| 811 GPIO_InitStructure.Speed = GPIO_SPEED_FAST; | |
| 812 HAL_GPIO_Init(GPIOA, &GPIO_InitStructure); | |
| 38 | 813 #endif |
| 814 } | |
| 815 | |
| 89 | 816 void GPIO_new_DEBUG_LOW(void) { |
| 38 | 817 #ifdef DEBUG_PIN_ACTIVE |
| 89 | 818 HAL_GPIO_WritePin(GPIOC,GPIO_PIN_3,GPIO_PIN_RESET); |
| 38 | 819 #endif |
| 820 } | |
| 821 | |
| 89 | 822 void GPIO_new_DEBUG_HIGH(void) { |
| 38 | 823 #ifdef DEBUG_PIN_ACTIVE |
| 89 | 824 HAL_GPIO_WritePin(GPIOC,GPIO_PIN_3,GPIO_PIN_SET); |
| 38 | 825 #endif |
| 826 } | |
| 827 | |
| 89 | 828 static void GPIO_Power_MainCPU_Init(void) { |
| 829 GPIO_InitTypeDef GPIO_InitStructure; | |
| 830 __GPIOC_CLK_ENABLE(); | |
| 831 GPIO_InitStructure.Pin = GPIO_PIN_0; | |
| 832 GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP; | |
| 833 GPIO_InitStructure.Pull = GPIO_PULLUP; | |
| 834 GPIO_InitStructure.Speed = GPIO_SPEED_LOW; | |
| 835 HAL_GPIO_Init( GPIOC, &GPIO_InitStructure); | |
| 836 HAL_GPIO_WritePin( GPIOC, GPIO_PIN_0, GPIO_PIN_RESET); | |
| 38 | 837 } |
| 838 | |
| 89 | 839 static void GPIO_Power_MainCPU_ON(void) { |
| 840 HAL_GPIO_WritePin( GPIOC, GPIO_PIN_0, GPIO_PIN_RESET); | |
| 38 | 841 } |
| 842 | |
| 89 | 843 static void GPIO_Power_MainCPU_OFF(void) { |
| 844 HAL_GPIO_WritePin( GPIOC, GPIO_PIN_0, GPIO_PIN_SET); | |
| 38 | 845 } |
| 846 | |
| 847 /** | |
| 848 * @brief Configures EXTI Line0 (connected to PA0 + PA1 pin) in interrupt mode | |
| 849 * @param None | |
| 850 * @retval None | |
| 851 */ | |
| 852 | |
| 89 | 853 static void EXTI_Wakeup_Button_Init(void) { |
| 854 GPIO_InitTypeDef GPIO_InitStructure; | |
| 38 | 855 |
| 89 | 856 __HAL_RCC_GPIOA_CLK_ENABLE(); |
| 857 BUTTON_OSTC_HAL_RCC_GPIO_CLK_ENABLE(); | |
| 858 GPIO_InitStructure.Pin = BUTTON_OSTC_GPIO_PIN; | |
| 859 GPIO_InitStructure.Mode = GPIO_MODE_IT_FALLING; | |
| 860 GPIO_InitStructure.Pull = GPIO_NOPULL; | |
| 861 HAL_GPIO_Init( BUTTON_OSTC_GPIO_PORT, &GPIO_InitStructure); | |
| 38 | 862 |
| 89 | 863 HAL_NVIC_SetPriority( BUTTON_OSTC_IRQn, 0x0F, 0); |
| 864 HAL_NVIC_EnableIRQ( BUTTON_OSTC_IRQn); | |
| 38 | 865 } |
| 866 | |
| 89 | 867 static void EXTI_Wakeup_Button_DeInit(void) { |
| 868 GPIO_InitTypeDef GPIO_InitStructure; | |
| 38 | 869 |
| 89 | 870 GPIO_InitStructure.Mode = GPIO_MODE_ANALOG; |
| 871 GPIO_InitStructure.Speed = GPIO_SPEED_LOW; | |
| 872 GPIO_InitStructure.Pull = GPIO_NOPULL; | |
| 38 | 873 |
| 89 | 874 GPIO_InitStructure.Pin = BUTTON_OSTC_GPIO_PIN; |
| 875 HAL_GPIO_Init( BUTTON_OSTC_GPIO_PORT, &GPIO_InitStructure); | |
| 876 HAL_NVIC_DisableIRQ( BUTTON_OSTC_IRQn); | |
| 38 | 877 } |
| 878 | |
| 89 | 879 static void EXTI_Test_Button_Init(void) { |
| 880 GPIO_InitTypeDef GPIO_InitStructure; | |
| 38 | 881 |
| 89 | 882 BUTTON_TEST_GPIO_CLK_ENABLE(); |
| 883 GPIO_InitStructure.Pin = BUTTON_TEST_GPIO_PIN; | |
| 884 GPIO_InitStructure.Mode = GPIO_MODE_IT_FALLING; | |
| 885 GPIO_InitStructure.Pull = GPIO_PULLUP; | |
| 886 HAL_GPIO_Init( BUTTON_TEST_GPIO_PORT, &GPIO_InitStructure); | |
| 887 HAL_NVIC_SetPriority( BUTTON_TEST_IRQn, 0x0F, 0); | |
| 888 HAL_NVIC_EnableIRQ( BUTTON_TEST_IRQn); | |
| 38 | 889 } |
| 890 | |
| 89 | 891 static void EXTI_Test_Button_DeInit(void) { |
| 892 GPIO_InitTypeDef GPIO_InitStructure; | |
| 38 | 893 |
| 89 | 894 GPIO_InitStructure.Mode = GPIO_MODE_ANALOG; |
| 895 GPIO_InitStructure.Speed = GPIO_SPEED_LOW; | |
| 896 GPIO_InitStructure.Pull = GPIO_NOPULL; | |
| 38 | 897 |
| 89 | 898 GPIO_InitStructure.Pin = BUTTON_TEST_GPIO_PIN; |
| 899 HAL_GPIO_Init( BUTTON_TEST_GPIO_PORT, &GPIO_InitStructure); | |
| 900 HAL_NVIC_DisableIRQ( BUTTON_TEST_IRQn); | |
| 38 | 901 } |
| 902 | |
| 903 /* NUCLEO C 13 | |
| 904 KEY_BUTTON_GPIO_CLK_ENABLE(); | |
| 905 GPIO_InitStructure.Mode = GPIO_MODE_IT_FALLING; | |
| 906 GPIO_InitStructure.Pull = GPIO_NOPULL; | |
| 907 GPIO_InitStructure.Pin = KEY_BUTTON_PIN; | |
| 908 HAL_GPIO_Init(KEY_BUTTON_GPIO_PORT, &GPIO_InitStructure); | |
| 909 HAL_NVIC_SetPriority(KEY_BUTTON_EXTI_IRQn, 2, 0); | |
| 910 HAL_NVIC_EnableIRQ(KEY_BUTTON_EXTI_IRQn); | |
| 911 */ | |
| 912 | |
| 913 /** | |
| 914 * @brief Wake Up Timer callback | |
| 915 * @param hrtc: RTC handle | |
| 916 * @retval None | |
| 917 */ | |
| 918 | |
| 919 /* | |
| 920 void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc) | |
| 921 { | |
| 922 static uint8_t uwCounter = 0; | |
| 923 uwCounter = 1; | |
| 924 } | |
| 925 */ | |
| 926 | |
| 89 | 927 void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *I2cHandle) { |
| 38 | 928 |
| 929 } | |
| 930 | |
| 89 | 931 void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *I2cHandle) { |
| 38 | 932 |
| 933 } | |
| 934 | |
| 89 | 935 void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *I2cHandle) { |
| 38 | 936 |
| 937 } | |
| 938 | |
| 89 | 939 void sleep_prepare(void) { |
| 940 EXTI_Wakeup_Button_Init(); | |
| 941 /* | |
| 942 GPIO_InitStruct.Pull = GPIO_PULLUP; | |
| 943 GPIO_InitStruct.Pin = GPIO_PIN_0; | |
| 944 HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); | |
| 945 */ | |
| 946 compass_sleep(); | |
| 947 HAL_Delay(100); | |
| 948 accelerator_sleep(); | |
| 949 HAL_Delay(100); | |
| 38 | 950 |
| 89 | 951 I2C_DeInit(); |
| 952 MX_SPI_DeInit(); | |
| 953 MX_SPI3_DeInit(); | |
| 954 ADCx_DeInit(); | |
| 38 | 955 |
| 89 | 956 GPIO_InitTypeDef GPIO_InitStruct; |
| 38 | 957 |
| 89 | 958 __HAL_RCC_GPIOA_CLK_ENABLE(); |
| 959 __HAL_RCC_GPIOB_CLK_ENABLE(); | |
| 960 __HAL_RCC_GPIOC_CLK_ENABLE(); | |
| 961 __HAL_RCC_GPIOH_CLK_ENABLE(); | |
| 38 | 962 |
| 89 | 963 GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; |
| 964 GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; | |
| 965 GPIO_InitStruct.Pull = GPIO_NOPULL; | |
| 966 GPIO_InitStruct.Pin = GPIO_PIN_All; | |
| 967 HAL_GPIO_Init( GPIOH, &GPIO_InitStruct); | |
| 38 | 968 #ifdef DEBUGMODE |
| 89 | 969 GPIO_InitStruct.Pin = GPIO_PIN_All ^ ( GPIO_PIN_3 | GPIO_PIN_8 | GPIO_PIN_9); /* debug */ |
| 38 | 970 #endif |
| 89 | 971 HAL_GPIO_Init( GPIOB, &GPIO_InitStruct); |
| 38 | 972 |
| 89 | 973 GPIO_InitStruct.Pin = |
| 974 GPIO_PIN_All | |
| 975 ^ ( GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_14 | |
| 976 | GPIO_PIN_15); /* power off & charger in & charge out & OSC32*/ | |
| 977 HAL_GPIO_Init( GPIOC, &GPIO_InitStruct); | |
| 38 | 978 |
| 89 | 979 GPIO_InitStruct.Pin = GPIO_PIN_All ^ ( GPIO_PIN_0); |
| 38 | 980 #ifdef DEBUGMODE |
| 89 | 981 GPIO_InitStruct.Pin = GPIO_PIN_All ^ ( GPIO_PIN_0 | GPIO_PIN_13 | GPIO_PIN_14); /* wake up button & debug */ |
| 38 | 982 #endif |
| 89 | 983 HAL_GPIO_Init( GPIOA, &GPIO_InitStruct); |
| 38 | 984 |
| 89 | 985 GPIO_InitStruct.Pin = GPIO_PIN_All; |
| 986 HAL_GPIO_Init( GPIOH, &GPIO_InitStruct); | |
| 38 | 987 |
| 89 | 988 GPIO_Power_MainCPU_OFF(); |
| 38 | 989 |
| 990 #ifndef DEBUGMODE | |
| 89 | 991 __HAL_RCC_GPIOB_CLK_DISABLE(); |
| 38 | 992 #endif |
| 89 | 993 __HAL_RCC_GPIOH_CLK_DISABLE(); |
| 38 | 994 |
| 89 | 995 HAL_Delay(1000); |
| 38 | 996 } |
| 997 | |
| 998 /* | |
| 999 void sleep_test(void) | |
| 1000 { | |
| 1001 GPIO_InitTypeDef GPIO_InitStruct; | |
| 1002 | |
| 1003 __HAL_RCC_GPIOA_CLK_ENABLE(); | |
| 1004 __HAL_RCC_GPIOB_CLK_ENABLE(); | |
| 1005 __HAL_RCC_GPIOC_CLK_ENABLE(); | |
| 1006 __HAL_RCC_GPIOH_CLK_ENABLE(); | |
| 1007 | |
| 1008 GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; | |
| 1009 GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; | |
| 1010 GPIO_InitStruct.Pull = GPIO_NOPULL; | |
| 1011 GPIO_InitStruct.Pin = GPIO_PIN_All; | |
| 1012 HAL_GPIO_Init(GPIOH, &GPIO_InitStruct); | |
| 1013 HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); | |
| 1014 | |
| 1015 GPIO_InitStruct.Pin = GPIO_PIN_All ^ ( GPIO_PIN_0 | GPIO_PIN_15 | GPIO_PIN_14); | |
| 1016 HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); | |
| 1017 | |
| 1018 GPIO_InitStruct.Pin = GPIO_PIN_All ^ ( GPIO_PIN_0); | |
| 1019 HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); | |
| 1020 | |
| 1021 GPIO_Power_MainCPU_OFF(); | |
| 1022 | |
| 1023 GPIO_InitStruct.Pull = GPIO_PULLUP; | |
| 1024 GPIO_InitStruct.Pin = GPIO_PIN_0; | |
| 1025 HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); | |
| 1026 | |
| 1027 // __HAL_RCC_GPIOA_CLK_DISABLE(); | |
| 1028 __HAL_RCC_GPIOB_CLK_DISABLE(); | |
| 1029 // __HAL_RCC_GPIOC_CLK_DISABLE(); | |
| 1030 __HAL_RCC_GPIOH_CLK_DISABLE(); | |
| 1031 | |
| 1032 | |
| 1033 HAL_Delay(5000); | |
| 1034 while(1) | |
| 1035 { | |
| 1036 RTC_StopMode_2seconds(); | |
| 1037 HAL_Delay(200); | |
| 1038 } | |
| 1039 } | |
| 1040 */ | |
| 1041 | |
| 1042 #ifdef USE_FULL_ASSERT | |
| 1043 | |
| 1044 /** | |
| 1045 * @brief Reports the name of the source file and the source line number | |
| 1046 * where the assert_param error has occurred. | |
| 1047 * @param file: pointer to the source file name | |
| 1048 * @param line: assert_param error line source number | |
| 1049 * @retval None | |
| 1050 */ | |
| 1051 void assert_failed(uint8_t* file, uint32_t line) | |
| 1052 { | |
| 89 | 1053 /* User can add his own implementation to report the file name and line number, |
| 1054 ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ | |
| 38 | 1055 |
| 89 | 1056 /* Infinite loop */ |
| 1057 while (1) | |
| 1058 { | |
| 1059 } | |
| 38 | 1060 } |
| 1061 #endif | |
| 1062 | |
| 1063 /** | |
| 1064 * @} | |
| 1065 */ | |
| 104 | 1066 /** |
| 1067 * @brief This function handles SysTick Handler. | |
| 1068 * @param None | |
| 1069 * @retval None | |
| 1070 */ | |
| 38 | 1071 |
| 104 | 1072 /*TxRx only here. Every 100 ms.*/ |
| 1073 uint8_t ticks100ms=0; | |
| 1074 void SysTick_Handler(void) | |
| 1075 { | |
| 1076 HAL_IncTick(); | |
| 1077 if(ticks100ms<100){ | |
| 1078 ticks100ms++; | |
| 1079 }else | |
| 1080 { | |
| 1081 ticks100ms=0; | |
| 1082 } | |
| 1083 } | |
| 38 | 1084 /** |
| 1085 * @} | |
| 1086 */ | |
| 1087 | |
| 1088 /************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/ |