Tue, 20 Aug 2024 15:18:43 +0200 |
Ideenmodellierer |
DevBugfix: Exit condition deco_stop_depth
Evo_2_23 tip
|
Fri, 16 Aug 2024 16:17:51 +0200 |
heinrichsweikamp |
Minor: Enable CO2-Sensor as default now
Evo_2_23
|
Thu, 15 Aug 2024 20:44:35 +0200 |
Ideenmodellierer |
DevBugfix: Added missing default language value
Evo_2_23
|
Wed, 14 Aug 2024 16:50:55 +0200 |
heinrichsweikamp |
minor
Evo_2_23
|
Wed, 14 Aug 2024 16:44:46 +0200 |
heinrichsweikamp |
merge new screen stuff
Evo_2_23
|
Wed, 14 Aug 2024 14:41:04 +0200 |
Ideenmodellierer |
Added first time initialization for new bluetooth module:
Evo_2_23
|
Tue, 13 Aug 2024 13:24:54 +0200 |
heinrichsweikamp |
support for new screen
default
|
Mon, 12 Aug 2024 22:25:46 +0200 |
Ideenmodellierer |
Instrument code for Bootloader:
Evo_2_23
|
Mon, 12 Aug 2024 22:23:03 +0200 |
Ideenmodellierer |
Reactivate Bootloader:
Evo_2_23
|
Mon, 12 Aug 2024 15:14:19 +0200 |
Ideenmodellierer |
Introduce speed dependend coloring of depth:
Evo_2_23
|
Mon, 12 Aug 2024 14:30:22 +0200 |
Ideenmodellierer |
Decrease calculation interval for ascend speed:
Evo_2_23
|
Mon, 22 Jul 2024 16:40:14 +0200 |
heinrichsweikamp |
Zusammenf?hren
|
Mon, 22 Jul 2024 16:39:48 +0200 |
heinrichsweikamp |
When opening the logbook, or scrolling inside a logbook page,
|
Mon, 22 Jul 2024 16:38:36 +0200 |
heinrichsweikamp |
Fix incorrect logging of bailout to Open Circuit when using the best gas.
|
Tue, 02 Jul 2024 20:05:08 +0200 |
Ideenmodellierer |
Bugfix empty line in deco plan (VPM only):
Evo_2_23
|
Tue, 02 Jul 2024 19:24:03 +0200 |
Ideenmodellierer |
Only use deco gas for calculation if option is enabled:
Evo_2_23
|
Tue, 07 May 2024 21:25:25 +0200 |
Ideenmodellierer |
Synchronize ADC and UART activities:
Evo_2_23
|
Tue, 07 May 2024 21:20:56 +0200 |
Ideenmodellierer |
Code cleanup
Evo_2_23
|
Tue, 07 May 2024 21:20:33 +0200 |
Ideenmodellierer |
Improvment battery charger visualization:
Evo_2_23
|
Tue, 07 May 2024 21:12:37 +0200 |
Ideenmodellierer |
Bugfix initialisation of surface pressure:
Evo_2_23
|
Sun, 05 May 2024 17:27:28 +0200 |
Ideenmodellierer |
Developer feature debug warning:
Evo_2_23
|
Sun, 05 May 2024 17:20:56 +0200 |
Ideenmodellierer |
Do not show SP tab if PSCR mode is active:
Evo_2_23
|
Mon, 18 Mar 2024 21:52:25 +0100 |
Ideenmodellierer |
Redefine Deco gas creation function:
Evo_2_23
|
Sat, 09 Mar 2024 20:05:33 +0100 |
Ideenmodellierer |
Development bugfix menu id handling:
Evo_2_23
|
Thu, 07 Mar 2024 21:51:18 +0100 |
Ideenmodellierer |
Potential Bugfix Selection MenuEdit lifecycle:
Evo_2_23
|
Thu, 07 Mar 2024 21:46:49 +0100 |
Ideenmodellierer |
Bugfix Selection of custom views:
Evo_2_23
|
Thu, 07 Mar 2024 21:42:23 +0100 |
Ideenmodellierer |
Added line checks for System Menu:
Evo_2_23
|
Fri, 01 Mar 2024 19:30:29 +0100 |
Ideenmodellierer |
Check line enable/disable state when a new page is selected:
Evo_2_23
|
Thu, 29 Feb 2024 18:49:55 +0100 |
Ideenmodellierer |
Consider flipped screen for Predive menu:
Evo_2_23
|
Thu, 15 Feb 2024 21:26:28 +0100 |
Ideenmodellierer |
Bugfix tInfo_write_content_simple flip:
Evo_2_23
|
Tue, 13 Feb 2024 17:30:24 +0100 |
heinrichsweikamp |
Minor: Remove absolute paths from the reference project files
|
Sun, 21 Jan 2024 22:26:37 +0100 |
Ideenmodellierer |
Consider pressure offset compensation in case of setting a default value:
Evo_2_23
|
Sun, 21 Jan 2024 22:24:36 +0100 |
Ideenmodellierer |
Added new PreDiveCheck info page:
Evo_2_23
|
Sun, 21 Jan 2024 22:18:51 +0100 |
Ideenmodellierer |
Added option to adjust pressure to diveO2 reference:
Evo_2_23
|
Sat, 20 Jan 2024 19:38:52 +0100 |
Ideenmodellierer |
Update version number and set beta state
Evo_2_23
|
Mon, 15 Jan 2024 21:44:18 +0100 |
Ideenmodellierer |
Migrated Sentinel protocol to new UART structure:
Evo_2_23
|
Sun, 07 Jan 2024 21:25:34 +0100 |
Ideenmodellierer |
Added autofocus for T3_DecoTTS view:
Evo_2_23
|
Sun, 07 Jan 2024 21:21:58 +0100 |
Ideenmodellierer |
Development bugfix CO2 LLC:
Evo_2_23
|
Sun, 07 Jan 2024 21:20:15 +0100 |
Ideenmodellierer |
Code cleanup: UART protocol definitions
Evo_2_23
|
Fri, 05 Jan 2024 16:01:22 +0100 |
Ideenmodellierer |
Added T3 autofocus for Gas list:
Evo_2_23
|
Wed, 27 Dec 2023 19:37:17 +0100 |
ideenmodellierer |
Bugfixes and code cleanup for BF views:
Evo_2_23
|
Wed, 27 Dec 2023 19:24:44 +0100 |
ideenmodellierer |
Bugfix BF temperatur display and cv switching:
Evo_2_23
|
Sun, 17 Dec 2023 21:49:02 +0100 |
Ideenmodellierer |
Added autofocus for BF Navigation view:
Evo_2_23
|
Sun, 17 Dec 2023 21:14:17 +0100 |
Ideenmodellierer |
Added event based display changes for big font view:
Evo_2_23
|
Sun, 17 Dec 2023 21:10:04 +0100 |
Ideenmodellierer |
Added selection if an active gas shall be used for deco calculation or not
Evo_2_23
|
Thu, 16 Nov 2023 20:37:20 +0100 |
Ideenmodellierer |
Added selection if an active gas shall be used for deco calculation or not
Evo_2_23
|
Thu, 16 Nov 2023 20:36:35 +0100 |
Ideenmodellierer |
Activated work gas for (p)scr mode:
Evo_2_23
|
Thu, 16 Nov 2023 20:32:09 +0100 |
Ideenmodellierer |
Added selection if an active gas shall be used for deco calculation or not:
Evo_2_23
|
Thu, 16 Nov 2023 20:25:01 +0100 |
Ideenmodellierer |
Changes wording from travel gas to work gas to use same wording as for other OSTCs
Evo_2_23
|
Sun, 05 Nov 2023 20:21:42 +0100 |
Ideenmodellierer |
Added CO2 display to T3 Bigfont view:
Evo_2_23
|
Sun, 05 Nov 2023 20:19:08 +0100 |
Ideenmodellierer |
Moved CO2 Menu from Xtra to Hardware:
Evo_2_23
|
Wed, 11 Oct 2023 17:49:19 +0200 |
Ideenmodellierer |
Bugfix Line order of info screen with flip screen active:
Evo_2_23
|
Mon, 09 Oct 2023 16:50:11 +0200 |
Ideenmodellierer |
Bugfix Flipscreen visualization:
|
Mon, 09 Oct 2023 16:50:11 +0200 |
Ideenmodellierer |
Bugfix Flipscreen visualization:
Evo_2_23
|
Mon, 09 Oct 2023 15:10:10 +0200 |
Ideenmodellierer |
Starting 'Evo_2_23' branch
Evo_2_23
|
Mon, 09 Oct 2023 11:23:27 +0200 |
heinrichsweikamp |
User Test
|
Mon, 25 Sep 2023 10:56:32 +0200 |
heinrichsweikamp |
1.6.5 release
|
Sun, 24 Sep 2023 18:43:12 +0200 |
Ideenmodellierer |
Split definition of custom views:
|
Sun, 24 Sep 2023 18:39:26 +0200 |
Ideenmodellierer |
Added debug information in case an error in the settings has been detected:
|
Thu, 14 Sep 2023 13:24:30 +0200 |
heinrichsweikamp |
1.6.4 release
|
Tue, 12 Sep 2023 12:02:49 +0200 |
heinrichsweikamp |
Testing build
|
Sun, 10 Sep 2023 11:46:45 +0200 |
heinrichsweikamp |
Fix a bug that disables arbitrary menu lines in dive mode if lines are disabled / inactive in surface mode. (mikeller)
|
Sun, 03 Sep 2023 18:03:49 +0200 |
Ideenmodellierer |
Bugfix CustomView selection during dive mode:
|
Sun, 03 Sep 2023 17:58:12 +0200 |
Ideenmodellierer |
Dev Bugfix: O2 values of new detected sensors were shown as invalid:
|
Sun, 03 Sep 2023 17:53:07 +0200 |
Ideenmodellierer |
Used real sensor state in simulation:
|
Thu, 31 Aug 2023 10:33:25 +0200 |
heinrichsweikamp |
Testing build
|
Sun, 27 Aug 2023 20:59:12 +0200 |
Ideenmodellierer |
Added function to skip lines which are not needed for operation:
|
Sun, 27 Aug 2023 20:55:57 +0200 |
Ideenmodellierer |
Only jump to Sensor view during charging if sensors are connected:
|
Sun, 27 Aug 2023 20:51:13 +0200 |
Ideenmodellierer |
DevBugfix CO2 sensor in streaming mode:
|
Sat, 26 Aug 2023 13:38:13 +0200 |
heinrichsweikamp |
Testing build
|
Sat, 26 Aug 2023 13:37:06 +0200 |
heinrichsweikamp |
Zusammenf?hren
|
Sat, 26 Aug 2023 13:35:15 +0200 |
heinrichsweikamp |
Update Firmware version number
|
Mon, 21 Aug 2023 17:20:07 +0200 |
heinrichsweikamp |
Adds a simple countdown timer, available as a custom view in surface and dive mode.
|
Thu, 10 Aug 2023 21:35:34 +0200 |
Ideenmodellierer |
Cleanup initialisation code:
|
Thu, 10 Aug 2023 21:30:24 +0200 |
Ideenmodellierer |
Cleanup initialisation / deinitialization:
|
Thu, 10 Aug 2023 21:27:58 +0200 |
Ideenmodellierer |
Removed dependency to protocol setting:
|
Thu, 10 Aug 2023 21:24:04 +0200 |
Ideenmodellierer |
Update RTE version number
|
Tue, 08 Aug 2023 17:29:03 +0200 |
Ideenmodellierer |
Cleanup warnings
|
Mon, 07 Aug 2023 20:32:42 +0200 |
Ideenmodellierer |
Added CO2 mirrow instance:
|
Mon, 07 Aug 2023 20:29:44 +0200 |
Ideenmodellierer |
Migrated CO2 protocol implementation to new format:
|
Mon, 31 Jul 2023 20:10:27 +0200 |
Ideenmodellierer |
Use mirror sensortype for visualization:
|
Mon, 31 Jul 2023 20:00:06 +0200 |
Ideenmodellierer |
Expanded Sensor map structure:
|
Mon, 31 Jul 2023 19:50:36 +0200 |
Ideenmodellierer |
Moved DiveO2 sensor specific funtionality into separated file:
|
Mon, 31 Jul 2023 19:46:29 +0200 |
Ideenmodellierer |
Restructure UART based sensor handling:
|
Thu, 27 Jul 2023 21:52:19 +0200 |
Ideenmodellierer |
Bugfix PSCR Settings in Simulator Mode:
|
Sat, 05 Aug 2023 11:52:08 +0200 |
heinrichsweikamp |
Avoid a configuration warning after the firmware upgrade by disabling automatic setpoint switching. This makes sure the user's automatic setpoint configuration is not overwritten by the validity checks if the settings are not in the correct spots for the new configuration. Users will have to manually re-create the automatic setpoint switching configuration in the new format;
|
Wed, 02 Aug 2023 08:41:03 +0200 |
heinrichsweikamp |
update current build for testing
|
Tue, 25 Jul 2023 14:48:58 +0200 |
heinrichsweikamp |
Fix bug introduced in 04b98a2, causing the deco planner to not show deco stops.
|
Wed, 12 Jul 2023 10:13:25 +0200 |
heinrichsweikamp |
When using automatic setpoint switching, allow the user to set an arbitrary ppO2 as a custom setpoint during the dive.
|
Tue, 04 Jul 2023 14:39:06 +0200 |
heinrichsweikamp |
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
|
Sun, 04 Jun 2023 21:59:26 +0200 |
Ideenmodellierer |
Dev Bugfx Empty buffer indication and stability improvments:
|
Sun, 04 Jun 2023 21:54:24 +0200 |
Ideenmodellierer |
Cleanup sensor data interface:
|
Wed, 31 May 2023 08:44:07 +0200 |
heinrichsweikamp |
Change support from Pyroscience -> DiveO2 sensors
|
Tue, 30 May 2023 18:44:20 +0200 |
Ideenmodellierer |
Bugfixloop UART multiplexer integration:
|
Mon, 29 May 2023 20:26:38 +0200 |
Ideenmodellierer |
Update digital O2 sensor information:
|
Mon, 29 May 2023 20:22:15 +0200 |
Ideenmodellierer |
Sensor status support for multiplexed DiveO2 sensors:
|
Mon, 29 May 2023 18:26:55 +0200 |
Ideenmodellierer |
Update real multiplexer implementation:
|
Tue, 23 May 2023 21:50:19 +0200 |
Ideenmodellierer |
Discovery<=>SmallCPU inferface update:
|
Tue, 23 May 2023 21:45:34 +0200 |
Ideenmodellierer |
Added UART multiplexer support for DiveO2:
|
Mon, 22 May 2023 09:15:09 +0200 |
heinrichsweikamp |
Zusammenf?hren
|
Mon, 22 May 2023 09:14:27 +0200 |
heinrichsweikamp |
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
|
Thu, 18 May 2023 09:49:17 +0200 |
heinrichsweikamp |
Add support for a configurable compass declination in a range of -99 to 99 degrees.
|
Thu, 11 May 2023 12:13:03 +0200 |
heinrichsweikamp |
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
|
Wed, 10 May 2023 16:25:39 +0200 |
heinrichsweikamp |
more menu items for the compass menu: Delete bearing, and reset to land based bearing. I have also re-enabled the real time bearing display in the menu - makes it easier to set the correct bearing. (mikeller)
|
Wed, 10 May 2023 16:24:57 +0200 |
heinrichsweikamp |
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
|
Sat, 22 Apr 2023 21:11:50 -0500 |
izzni |
Fix character truncation when screen is flipped. This was causing the dive computer to lock up when in English Units with the screen flipped when the first decompression stop is shown using FONT_105.
|
Fri, 21 Apr 2023 09:48:23 +0200 |
heinrichsweikamp |
Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
|
Fri, 21 Apr 2023 09:47:44 +0200 |
heinrichsweikamp |
CCR overview in surface mode. Makes it easy to quickly check that all settings (mode, setpoints, diluent, scrubber timer) are correct when preparing to dive (also makes the OC gas list available in surface mode for the same reason).
|
Fri, 21 Apr 2023 09:47:06 +0200 |
heinrichsweikamp |
Deactivation of the 'fallback' option when the CCR mode is set to 'Fixed' - this makes it a little clearer that the option has no influence in this mode.
|
Thu, 13 Apr 2023 09:35:43 +0200 |
heinrichsweikamp |
1.6.2 release
|
Wed, 12 Apr 2023 09:56:00 +0200 |
heinrichsweikamp |
Update build for testing
|
Wed, 12 Apr 2023 09:30:15 +0200 |
heinrichsweikamp |
change button default responsiveness to 100
|
Wed, 12 Apr 2023 09:24:44 +0200 |
heinrichsweikamp |
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
|
Mon, 27 Mar 2023 10:04:53 +0200 |
heinrichsweikamp |
Update build for testing
|
Sun, 26 Mar 2023 18:34:30 +0200 |
heinrichsweikamp |
increase HAL_Delay to 10ms for cold-start-button reset
|
Sun, 26 Mar 2023 11:27:29 +0200 |
heinrichsweikamp |
Preparing a 1.6.2 release candidate
|
Tue, 21 Mar 2023 12:57:37 +0100 |
heinrichsweikamp |
Fix/handle negative scrubber timer values
|
Tue, 21 Mar 2023 12:56:54 +0100 |
heinrichsweikamp |
Quit simualted dives after the dive time set in the SIM tab.
|
Fri, 17 Mar 2023 09:35:25 +0100 |
heinrichsweikamp |
Some compass improvements from mikeller
|
Wed, 15 Mar 2023 09:18:07 +0100 |
heinrichsweikamp |
- Colours for scrubber display when time remaining falls below a threshold value
|
Tue, 07 Mar 2023 22:14:20 +0100 |
Ideenmodellierer |
Dev Bugfix: ignore analog out of bounds limits for DiveO2 sensor:
|
Tue, 07 Mar 2023 20:02:05 +0100 |
Ideenmodellierer |
Added visualization of CO2 during dive:
|
Tue, 07 Mar 2023 19:59:02 +0100 |
Ideenmodellierer |
Cleanup display of multiple warnings in T3 (Big font) view:
|
Tue, 07 Mar 2023 19:55:13 +0100 |
Ideenmodellierer |
Only show autodetection in sensor menu if external interface is present:
|
Tue, 07 Mar 2023 19:52:18 +0100 |
Ideenmodellierer |
Updated outdated comment
|
Tue, 07 Mar 2023 19:51:30 +0100 |
Ideenmodellierer |
Dev Bugfix: Alignment problem in lifedata structure:
|
Mon, 13 Mar 2023 22:23:00 +0100 |
Ideenmodellierer |
resolv merge
|
Sun, 05 Mar 2023 22:17:32 +0100 |
Ideenmodellierer |
Avoid blinking in customer view selection page:
|
Mon, 13 Mar 2023 22:18:28 +0100 |
Ideenmodellierer |
Added enum for Co2 display
|
Sun, 05 Mar 2023 22:14:53 +0100 |
Ideenmodellierer |
Added display of co2 ppm values:
|
Sun, 05 Mar 2023 22:06:47 +0100 |
Ideenmodellierer |
Added pressure compensation to CO2 detection:
|
Tue, 21 Feb 2023 21:19:31 +0100 |
Ideenmodellierer |
Code cleanup sensors under development:
|
Sun, 19 Feb 2023 21:52:02 +0100 |
Ideenmodellierer |
Update Sentinel protocol:
|
Sun, 19 Feb 2023 21:51:19 +0100 |
Ideenmodellierer |
Added DiveO2 fatal error detection:
|
Sun, 19 Feb 2023 21:48:47 +0100 |
Ideenmodellierer |
Enable start dive in Big font display:
|
Sun, 19 Feb 2023 21:43:24 +0100 |
Ideenmodellierer |
Update Sentinel protocol:
|
Thu, 02 Feb 2023 17:35:54 +0100 |
Ideenmodellierer |
Added button lock after wakeup in surface mode:
|
Thu, 02 Feb 2023 17:35:38 +0100 |
Ideenmodellierer |
Added button lock after wakeup in surface mode:
|
Thu, 02 Feb 2023 17:26:54 +0100 |
Ideenmodellierer |
Enable start dive in Big font display:
|
Thu, 02 Feb 2023 17:19:24 +0100 |
Ideenmodellierer |
Added data init function for external interface:
|
Mon, 06 Mar 2023 16:03:00 +0100 |
heinrichsweikamp |
NEW: Add mini compass with marker declination indication
|
Fri, 03 Mar 2023 10:41:44 +0100 |
heinrichsweikamp |
Fixed logbook download after switch from CCR to extra (OC) gas if the extra gas
|
Tue, 14 Feb 2023 10:21:56 +0100 |
heinrichsweikamp |
Fixed invalid setpoint (0.0) used after switch from CCR to extra (OC) gas
|
Sun, 15 Jan 2023 21:51:54 +0100 |
Ideenmodellierer |
Removed interface selection from sensor menu:
|
Sun, 15 Jan 2023 21:48:34 +0100 |
Ideenmodellierer |
Optical sensor as default:
|
Sun, 15 Jan 2023 21:45:14 +0100 |
Ideenmodellierer |
Fix compiler switch:
|
Sun, 15 Jan 2023 21:43:33 +0100 |
Ideenmodellierer |
Improvment sensor Autodetection:
|
Sat, 14 Jan 2023 20:49:40 +0100 |
Ideenmodellierer |
Update sensor menu support for automatic sensor detection:
|
Sat, 14 Jan 2023 20:46:17 +0100 |
Ideenmodellierer |
Added auto detection functionality for sensors connected to the external interface:
|
Sat, 14 Jan 2023 20:41:36 +0100 |
Ideenmodellierer |
Added sensor map to Firmware <=> RTE inferface:
|
Sat, 14 Jan 2023 20:37:20 +0100 |
Ideenmodellierer |
Enabled CO2 support for beta test phase:
|
Sat, 14 Jan 2023 20:35:40 +0100 |
Ideenmodellierer |
Bugfix data synchronization after RTE start:
|
Sat, 07 Jan 2023 18:11:52 +0100 |
Ideenmodellierer |
Update CO2 sensor implementation:
|
Thu, 05 Jan 2023 18:30:06 +0100 |
Ideenmodellierer |
Development feature: external pressure sensor
|
Thu, 05 Jan 2023 18:27:04 +0100 |
Ideenmodellierer |
DigO2 added raw data request:
|
Thu, 05 Jan 2023 18:25:47 +0100 |
Ideenmodellierer |
Show saturation in large font (T3) view:
|
Thu, 05 Jan 2023 18:22:21 +0100 |
Ideenmodellierer |
DigO2 added raw data request:
|
Tue, 03 Jan 2023 19:47:12 +0100 |
Ideenmodellierer |
Bugfix set date (year):
|
Sun, 27 Nov 2022 15:18:00 +0100 |
heinrichsweikamp |
Add build for 1.6.1 beta / RTE 2.9 (Support for DiveO2 solid state oxygen sensors)
|
Sun, 20 Nov 2022 20:49:41 +0100 |
Ideenmodellierer |
Updated menu structure to support new sensor information page:
|
Sun, 20 Nov 2022 20:46:10 +0100 |
Ideenmodellierer |
Added new info page for extended sensor data:
|
Sun, 20 Nov 2022 20:43:04 +0100 |
Ideenmodellierer |
Added customizable data area for specific sensor data:
|
Sun, 20 Nov 2022 20:42:33 +0100 |
Ideenmodellierer |
Increased version number and set beta label
|
Sun, 20 Nov 2022 20:42:08 +0100 |
Ideenmodellierer |
Added customizable data area for specific sensor data:
|
Sun, 20 Nov 2022 20:37:44 +0100 |
Ideenmodellierer |
Increased version number and set beta label
|
Sun, 20 Nov 2022 20:36:34 +0100 |
Ideenmodellierer |
Bugfix PSCR menu button label:
|
Tue, 08 Nov 2022 22:16:56 +0100 |
Ideenmodellierer |
Development bugfix number of spare bytes in setting structure
|
Tue, 08 Nov 2022 21:16:17 +0100 |
Ideenmodellierer |
Extension scrubber time:
|
Tue, 08 Nov 2022 21:13:14 +0100 |
Ideenmodellierer |
Bugfix compass bearing:
|
Thu, 03 Nov 2022 20:44:51 +0100 |
Ideenmodellierer |
Menu cleanup rebreather specific settings:
|
Thu, 03 Nov 2022 20:44:21 +0100 |
Ideenmodellierer |
Menu cleanup rebreather specific settings:
|
Thu, 03 Nov 2022 20:37:06 +0100 |
Ideenmodellierer |
Bugfix: only reset menu if a new sub menu is created:
|
Tue, 01 Nov 2022 09:55:45 +0100 |
Ideenmodellierer |
Bugfix release frame:
|
Fri, 28 Oct 2022 20:49:21 +0200 |
Ideenmodellierer |
Added protocol functions for UART DiveO2 sensor:
|
Fri, 28 Oct 2022 20:32:24 +0200 |
Ideenmodellierer |
Added selection of digital o2 sensor source to HW menu:
|
Fri, 28 Oct 2022 20:29:37 +0200 |
Ideenmodellierer |
Added digital o2 sensor to settings and data exchange:
|
Fri, 28 Oct 2022 19:39:20 +0200 |
Ideenmodellierer |
Bugfix display of deactivated sensors:
|
Tue, 18 Oct 2022 21:21:32 +0200 |
Ideenmodellierer |
Bugfix motioncontrol frame deactivation:
|
Tue, 18 Oct 2022 20:56:19 +0200 |
Ideenmodellierer |
Cleanup warnings:
|
Sun, 25 Sep 2022 21:13:45 +0200 |
Ideenmodellierer |
Bugfix Empty menu:
|
Sun, 25 Sep 2022 21:09:18 +0200 |
Ideenmodellierer |
Improvment key event detection:
|
Fri, 19 Aug 2022 11:30:24 +0200 |
heinrichsweikamp |
Merge
|
Fri, 19 Aug 2022 11:27:44 +0200 |
heinrichsweikamp |
1.6.0 release
Betatest
|
Sat, 06 Aug 2022 11:10:56 +0200 |
heinrichsweikamp |
Update current build for testing
Betatest
|
Fri, 05 Aug 2022 16:04:52 +0200 |
Ideenmodellierer |
Improvment charge percent visualization:
Betatest
|
Fri, 05 Aug 2022 15:27:01 +0200 |
Ideenmodellierer |
Added compile switch for Sentinel rebreather option
Betatest
|
Fri, 05 Aug 2022 15:26:28 +0200 |
Ideenmodellierer |
Improvment external interface usage:
Betatest
|
Fri, 05 Aug 2022 15:22:26 +0200 |
Ideenmodellierer |
Added Sentinel protocoll support:
Betatest
|
Fri, 05 Aug 2022 15:15:01 +0200 |
Ideenmodellierer |
Added Sentinel as O2 sensor source:
Betatest
|
Fri, 05 Aug 2022 15:13:29 +0200 |
Ideenmodellierer |
Added sanity check for temperature and pressure values:
Betatest
|
Fri, 05 Aug 2022 15:10:10 +0200 |
Ideenmodellierer |
Increased version numbers:
Betatest
|
Fri, 05 Aug 2022 14:56:17 +0200 |
Ideenmodellierer |
Bugfix Battery charge complete event:
Betatest
|
Wed, 03 Aug 2022 18:19:03 +0200 |
Ideenmodellierer |
Bugfix automatic switch to o2 sensor custom view:
Betatest
|
Thu, 02 Jun 2022 20:24:59 +0200 |
Ideenmodellierer |
Ignore automatic setpoint changes during ascend:
Betatest
|
Mon, 16 May 2022 20:50:26 +0200 |
Ideenmodellierer |
Bugfix: Set actual gas after basic dive settings were created:
Betatest
|
Mon, 25 Apr 2022 21:15:01 +0200 |
Ideenmodellierer |
Bugfix low ppO2 warning in bailout mode:
Betatest
|
Mon, 25 Apr 2022 21:10:10 +0200 |
Ideenmodellierer |
Bugfix screen clipping (Flipdisplay mode):
Betatest
|
Mon, 25 Apr 2022 21:07:28 +0200 |
Ideenmodellierer |
Bugfix visualization better setpoint:
Betatest
|
Fri, 22 Apr 2022 18:24:43 +0200 |
Jan Mulder |
cleanup: Use correct "per" symbol
Betatest
|
Thu, 21 Apr 2022 21:02:50 +0200 |
Jan Mulder |
Bugfix: deco planner did not initialize properly
Betatest
|
Wed, 20 Apr 2022 20:25:04 +0200 |
Jan Mulder |
Move include file to common to ...
Betatest
|
Mon, 22 Nov 2021 19:39:11 +0100 |
Jan Mulder |
Allow longer scrubber time
Betatest
|
Wed, 30 Mar 2022 18:07:21 +0200 |
Ideenmodellierer |
Bugfix: Missing flip screen support for charge view
Betatest
|
Wed, 30 Mar 2022 18:01:29 +0200 |
heinrichsweikamp |
Zusammenf?hren
Betatest
|
Wed, 30 Mar 2022 18:00:21 +0200 |
heinrichsweikamp |
Show 98% in case of Oxygen as the calibrating gas
Betatest
|
Sat, 12 Mar 2022 23:01:11 +0100 |
Ideenmodellierer |
Added Charging view:
Betatest
|
Sat, 12 Mar 2022 22:58:22 +0100 |
Ideenmodellierer |
Support of unknown charging counter values:
Betatest
|
Sat, 12 Mar 2022 22:54:26 +0100 |
Ideenmodellierer |
Reduce display brightness in case the charger is connected:
Betatest
|
Sat, 12 Mar 2022 22:49:09 +0100 |
Ideenmodellierer |
Rework charge cycle:
Betatest
|
Sat, 12 Mar 2022 22:48:45 +0100 |
Ideenmodellierer |
Rework charge cycle:
Betatest
|
Sat, 12 Mar 2022 22:42:56 +0100 |
Ideenmodellierer |
Increased version number
Betatest
|
Sat, 12 Mar 2022 14:57:54 +0100 |
heinrichsweikamp |
increase version numbers for upcomming release
Betatest
|
Fri, 24 Dec 2021 13:40:47 +0100 |
heinrichsweikamp |
update test build
Betatest
|
Tue, 21 Dec 2021 19:36:41 +0100 |
Ideenmodellierer |
Stability improvment bluetooth startup:
Betatest
|
Tue, 21 Dec 2021 19:32:29 +0100 |
Ideenmodellierer |
Revert Setbluetooh name changes
Betatest
|
Tue, 14 Dec 2021 15:36:10 +0100 |
heinrichs weikamp |
PSCR Mode
Betatest
|
Mon, 01 Nov 2021 12:39:34 +0100 |
heinrichs weikamp |
Undo Rev. 660
|
Sun, 08 Aug 2021 09:36:23 +0200 |
heinrichsweikamp |
Add option to reset bluetooth name
|
Wed, 28 Apr 2021 09:47:25 +0200 |
heinrichs weikamp |
Update build file for testing
|
Tue, 27 Apr 2021 21:29:26 +0200 |
Ideenmodellierer |
Bugfix handling of new menu tab in flipped mode:
|
Mon, 26 Apr 2021 15:03:04 +0200 |
heinrichs weikamp |
Update release date
|
Sun, 25 Apr 2021 20:47:01 +0200 |
Ideenmodellierer |
Added visualization of scrubber time:
|
Sun, 25 Apr 2021 20:42:56 +0200 |
Ideenmodellierer |
Added count down timer for scrubber time:
|
Sun, 25 Apr 2021 20:41:19 +0200 |
Ideenmodellierer |
Introduced new menu tab for addition CCR options:
|
Sun, 25 Apr 2021 20:36:18 +0200 |
Ideenmodellierer |
Bugfix temperature display Logpage2:
|
Mon, 19 Apr 2021 20:34:53 +0200 |
Ideenmodellierer |
Allow setpoint starting at 0.4 ppO2:
|
Mon, 19 Apr 2021 20:20:38 +0200 |
Ideenmodellierer |
Automatik setpoint change:
|
Mon, 19 Apr 2021 20:19:32 +0200 |
Ideenmodellierer |
Automatik setpoint change:
|
Mon, 19 Apr 2021 20:16:24 +0200 |
Ideenmodellierer |
Bugfix consider checkbox in calculation of right aligned and centered position:
|
Mon, 19 Apr 2021 20:14:20 +0200 |
Ideenmodellierer |
Motion detection: Enable focus after focus calibration:
|
Tue, 13 Apr 2021 19:25:41 +0200 |
Ideenmodellierer |
Integrated selection of bailout in the diluent selection page:
|
Tue, 13 Apr 2021 19:21:14 +0200 |
Ideenmodellierer |
Remove battery charge counter from information menu:
|
Tue, 13 Apr 2021 19:18:32 +0200 |
Ideenmodellierer |
Small changes in charger state handling:
|
Tue, 30 Mar 2021 10:34:12 +0200 |
heinrichs weikamp |
Compile with ENABLE_CHARGER_STATUS_V2
|
Wed, 24 Mar 2021 22:06:00 +0100 |
Ideenmodellierer |
Reimplemented charger status generation (deactivated):
|
Wed, 24 Mar 2021 21:28:41 +0100 |
Ideenmodellierer |
Do not show focus indicator in case motion detection is suspended:
|
Thu, 11 Mar 2021 21:45:22 +0100 |
Ideenmodellierer |
Development Bugfix Deco bars not shown after last deco stop passed:
|
Thu, 11 Mar 2021 21:43:43 +0100 |
Ideenmodellierer |
Development bugfix Viewport settings:
|
Thu, 25 Feb 2021 12:20:43 +0100 |
heinrichsweikamp |
add build for testing, advance to FW1.5.7, RTE is unchanged since 1.5.6
|
Wed, 24 Feb 2021 21:45:35 +0100 |
Ideenmodellierer |
Added last measured PPO2 value to sensor selection dialog:
|
Wed, 24 Feb 2021 21:04:07 +0100 |
Ideenmodellierer |
Debounce fallback warning:
|
Wed, 24 Feb 2021 21:03:54 +0100 |
Ideenmodellierer |
Debounce fallback warning:
|
Wed, 24 Feb 2021 21:03:22 +0100 |
Ideenmodellierer |
Debounce fallback warning:
|
Wed, 24 Feb 2021 19:18:26 +0100 |
Ideenmodellierer |
Enable sensor check for Analog PPO2 mode:
|
Tue, 23 Feb 2021 21:58:18 +0100 |
Ideenmodellierer |
Added menu structure to allow ppo2 modification in simulator mode:
|
Tue, 23 Feb 2021 21:55:52 +0100 |
Ideenmodellierer |
Warnings:
|
Tue, 23 Feb 2021 21:55:26 +0100 |
Ideenmodellierer |
Warnings:
|
Tue, 23 Feb 2021 21:54:56 +0100 |
Ideenmodellierer |
Warnings:
|
Tue, 23 Feb 2021 21:53:24 +0100 |
Ideenmodellierer |
Added functionality to add ppo2 mV offset:
|
Fri, 12 Feb 2021 21:46:36 +0100 |
Ideenmodellierer |
Added compile switch for T3_PROFILE menu operation option
|
Fri, 12 Feb 2021 21:43:27 +0100 |
Ideenmodellierer |
Improve in / out of focus transitions:
|
Fri, 12 Feb 2021 21:37:50 +0100 |
Ideenmodellierer |
Added option to select sensitivity of focus detection:
|
Mon, 08 Feb 2021 21:35:46 +0100 |
Ideenmodellierer |
Switch Sector / Scroll detection to vector implementation:
|
Sun, 07 Feb 2021 22:05:32 +0100 |
Ideenmodellierer |
Development bugfix: Marker in standard t3 view drawn in wrong direction
|
Sun, 07 Feb 2021 22:04:43 +0100 |
Ideenmodellierer |
Improvment frame Handling:
|
Wed, 03 Feb 2021 21:45:48 +0100 |
Ideenmodellierer |
Adjustments for flipped display view:
|
Wed, 03 Feb 2021 21:44:22 +0100 |
Ideenmodellierer |
Use roll and pitch agles in 0-360 format:
|
Wed, 27 Jan 2021 22:12:44 +0100 |
Ideenmodellierer |
Added minilog functions to allow marker synchronisation:
|
Wed, 27 Jan 2021 22:10:11 +0100 |
Ideenmodellierer |
Added t3 quick menu for marker synchronisation:
|
Wed, 27 Jan 2021 22:04:45 +0100 |
Ideenmodellierer |
Development bugfix: focus state not remembered:
|
Wed, 27 Jan 2021 22:03:11 +0100 |
Ideenmodellierer |
Development bugfix: Low battery warning was interpretated as marker:
|
Wed, 27 Jan 2021 21:58:46 +0100 |
Ideenmodellierer |
Development bugfix: show replay symbol only for the selected dive:
|
Wed, 27 Jan 2021 21:56:48 +0100 |
Ideenmodellierer |
Moved non critical functions from timer interrupt to main loop:
|
Wed, 20 Jan 2021 20:05:05 +0100 |
Ideenmodellierer |
Added "Set Marker" to T3 quick menu:
|
Fri, 15 Jan 2021 21:33:07 +0100 |
Ideenmodellierer |
Added "Set Marker" to T3 quick menu:
|
Fri, 15 Jan 2021 21:20:29 +0100 |
Ideenmodellierer |
Bugfix inverted whitspace:
|
Thu, 14 Jan 2021 21:25:15 +0100 |
Ideenmodellierer |
Suspend MotionDetection events while diver is operationg the OSTC:
|
Thu, 14 Jan 2021 20:38:28 +0100 |
Ideenmodellierer |
Added access to logbook marker data:
|
Thu, 14 Jan 2021 19:17:28 +0100 |
Ideenmodellierer |
Bugfix: CalibViewport were shown even in case the compile switch had not been set:
|
Fri, 05 Feb 2021 14:53:50 +0100 |
heinrichsweikamp |
Update RTE required value for release
|
Fri, 05 Feb 2021 14:50:18 +0100 |
heinrichsweikamp |
Added tag v1.5.6 release for changeset 06ec1da5e105
|
Fri, 05 Feb 2021 14:50:05 +0100 |
heinrichsweikamp |
1.5.6 release
v1.5.6 release
|
Thu, 07 Jan 2021 09:53:04 +0100 |
heinrichsweikamp |
change O2_CALIB_FRACTION_O2 to 0.98
|
Wed, 06 Jan 2021 21:01:00 +0100 |
Ideenmodellierer |
Merged menu items of viewport and motion control:
|
Wed, 06 Jan 2021 19:41:43 +0100 |
Ideenmodellierer |
T3 profile view: Added visualization of deco data
|
Tue, 05 Jan 2021 20:35:01 +0100 |
Ideenmodellierer |
Added replay data scaling in case life data is longer than replay block
|
Mon, 04 Jan 2021 22:49:07 +0100 |
Ideenmodellierer |
Bugfix T3 skip deactivated views:
|
Mon, 04 Jan 2021 22:45:37 +0100 |
Ideenmodellierer |
Added compile switch for new T3 View Profile
|
Mon, 04 Jan 2021 21:48:31 +0100 |
Ideenmodellierer |
Bugfix T3 skip deactivated views:
|
Mon, 04 Jan 2021 21:41:51 +0100 |
Ideenmodellierer |
New replay block for T3 profile:
|
Mon, 04 Jan 2021 21:38:28 +0100 |
Ideenmodellierer |
MotionControl-Sector: Map sectors during switch T7 <=> T3:
|
Mon, 04 Jan 2021 21:35:38 +0100 |
Ideenmodellierer |
Added functionality to select a dive to be shown in the T3 profile view:
|
Mon, 04 Jan 2021 21:32:39 +0100 |
Ideenmodellierer |
Bugfix Selection of primary view:
|
Mon, 04 Jan 2021 21:30:04 +0100 |
Ideenmodellierer |
Added compile switch for new T3 View Profile
|
Mon, 04 Jan 2021 21:24:24 +0100 |
Ideenmodellierer |
Added PrintGraph option to skip invalid data entries:
|
Sun, 03 Jan 2021 14:43:16 +0100 |
Ideenmodellierer |
MotionCtrl - Sectorview Map sectors directly to custom views:
|
Wed, 06 Jan 2021 22:02:49 +0100 |
heinrichsweikamp |
Minor: Comment translation into English
|
Tue, 22 Dec 2020 22:23:11 +0100 |
Ideenmodellierer |
Align VPM tag in log list to be at same position as GF tag:
|
Thu, 17 Dec 2020 10:58:28 +0100 |
heinrichsweikamp |
Minor: Update the documentation for building the code
|
Thu, 17 Dec 2020 09:52:12 +0100 |
heinrichsweikamp |
Update current build, "RTErequired" value and release date
|
Wed, 16 Dec 2020 09:43:11 +0100 |
heinrichsweikamp |
update ostc4pack sample files
|
Sun, 13 Dec 2020 18:31:40 +0100 |
Ideenmodellierer |
Motion control: Jump back to primary view if focus is lost:
|
Sun, 13 Dec 2020 18:29:12 +0100 |
Ideenmodellierer |
Reduced view angle and number of vusiualized custom views in setor mode:
|
Sat, 12 Dec 2020 21:05:11 +0100 |
Ideenmodellierer |
Added option for 100% o2 calibration:
|
Sat, 12 Dec 2020 20:54:31 +0100 |
Ideenmodellierer |
Solved minor warnings
|
Sat, 12 Dec 2020 20:52:58 +0100 |
Ideenmodellierer |
Show Fallback if no valid sensor value is available:
|
Sat, 12 Dec 2020 19:18:57 +0100 |
Ideenmodellierer |
Added ex Interface measurement restart in case of i2c disturbance:
|
Sat, 12 Dec 2020 19:16:37 +0100 |
Ideenmodellierer |
Bugfix bad resolution of compass LSM303AGR:
|
Thu, 03 Dec 2020 13:17:32 +0100 |
heinrichsweikamp |
Minor: Functional inert cleanup of some unused variables
|
Sun, 29 Nov 2020 23:02:11 +0100 |
Ideenmodellierer |
Rework pitch detection:
|
Sun, 29 Nov 2020 22:58:11 +0100 |
Ideenmodellierer |
Handle o2 voltage values < 0.5mV as invalid:
|
Sun, 29 Nov 2020 22:55:31 +0100 |
Ideenmodellierer |
Return to o2 values:
|
Sun, 29 Nov 2020 22:53:33 +0100 |
Ideenmodellierer |
Change style of viewport calibration menu:
|
Wed, 25 Nov 2020 20:26:01 +0100 |
Ideenmodellierer |
Improved focus detection:
|
Wed, 25 Nov 2020 20:19:50 +0100 |
Ideenmodellierer |
Update String "Blickwinkel":
|
Wed, 25 Nov 2020 20:18:22 +0100 |
Ideenmodellierer |
Added debug view to viewport calibration:
|
Wed, 25 Nov 2020 20:16:20 +0100 |
Ideenmodellierer |
Reactivate compass parameter stored in NVM:
|
Mon, 30 Nov 2020 20:55:23 +0100 |
Ideenmodellierer |
Try to reduce legth of log entry string:
|
Mon, 30 Nov 2020 20:52:49 +0100 |
Ideenmodellierer |
Added new section "lower.font":
|
Sun, 29 Nov 2020 11:41:03 +0100 |
heinrichsweikamp |
Minor: Update the documentation for building the code
|
Tue, 24 Nov 2020 13:22:23 -0600 |
izzni |
-Add 12HR Time Support
|
Sat, 21 Nov 2020 17:41:59 +0100 |
heinrichsweikamp |
add current build
|
Sun, 15 Nov 2020 20:12:19 +0100 |
Ideenmodellierer |
Bugfix center / right alignment if dualfont is used:
|
Sun, 15 Nov 2020 20:09:31 +0100 |
Ideenmodellierer |
Bugfix One or more deactivated sensors hide sensor display:
|
Sun, 15 Nov 2020 20:01:56 +0100 |
Ideenmodellierer |
Refine o2 sensor diagnostic functions:
|
Sun, 15 Nov 2020 19:58:14 +0100 |
Ideenmodellierer |
Added ADC sensor interface to O2 sensore menu structure:
|
Sun, 15 Nov 2020 19:54:36 +0100 |
Ideenmodellierer |
Solved minor warnings
|
Sun, 15 Nov 2020 19:53:09 +0100 |
Ideenmodellierer |
Added O2 sensor source and calibration parameters to setting structure
|
Sun, 15 Nov 2020 19:52:03 +0100 |
Ideenmodellierer |
Check if HW evaluation was performed:
|
Thu, 12 Nov 2020 20:06:04 +0100 |
Ideenmodellierer |
Changed operation mode of RecoverSampleIndex:
|
Thu, 12 Nov 2020 20:03:00 +0100 |
Ideenmodellierer |
Stabilityfix: Do not trust lastDiveLogID == 0 at startup:
|
Thu, 12 Nov 2020 19:54:58 +0100 |
Ideenmodellierer |
Switch source of o2 sensor data depending on availability of external ADC:
|
Thu, 12 Nov 2020 19:48:28 +0100 |
Ideenmodellierer |
Added HW_Info to Discovery <=> RTE data exchange:
|
Thu, 12 Nov 2020 19:46:03 +0100 |
Ideenmodellierer |
Added external ADC interface functionality (MCP3424):
|
Sun, 08 Nov 2020 18:49:54 +0100 |
Ideenmodellierer |
Added color indicator for focus state:
|
Sun, 08 Nov 2020 18:46:46 +0100 |
Ideenmodellierer |
Added menu structure to acces viewport calibration:
|
Sun, 08 Nov 2020 18:43:19 +0100 |
Ideenmodellierer |
Added viewport functionality:
|
Sun, 08 Nov 2020 18:38:53 +0100 |
Ideenmodellierer |
Make sure motion detection settings are set to default values:
|
Sun, 08 Nov 2020 18:36:02 +0100 |
Ideenmodellierer |
Only execute motion detection functions if features is enabled:
|
Sun, 08 Nov 2020 16:38:43 +0100 |
Ideenmodellierer |
Update roll and pitch value in simulation mode:
|
Mon, 02 Nov 2020 21:17:45 +0100 |
Ideenmodellierer |
Added viewport calibration to dive menu:
|
Mon, 02 Nov 2020 21:15:42 +0100 |
Ideenmodellierer |
Added new settings for Viewport:
|
Tue, 03 Nov 2020 12:47:51 +0100 |
heinrichsweikamp |
Add I2C address for external bulkhead ADC (Hardware gen 3 only) to i2c.h
|
Mon, 02 Nov 2020 12:13:02 +0100 |
heinrichsweikamp |
add current build
|
Sun, 11 Oct 2020 18:33:19 +0200 |
Ideenmodellierer |
Shortend t3 view names:
|
Sat, 10 Oct 2020 21:02:05 +0200 |
Ideenmodellierer |
Added new t3 view showing first deco stop and tts in parallel:
|
Sat, 10 Oct 2020 18:34:10 +0200 |
Ideenmodellierer |
Added default view selection and auto return to view to t3 visualization:
|
Sat, 10 Oct 2020 18:30:13 +0200 |
Ideenmodellierer |
Bugfix return from submenu in t3 view:
|
Sat, 10 Oct 2020 16:59:18 +0200 |
Ideenmodellierer |
Added inertia simulation for compass heading:
|
Sat, 10 Oct 2020 13:51:44 +0200 |
Ideenmodellierer |
BugFix firmware downgrade to version with less settings:
|
Wed, 07 Oct 2020 18:07:10 +0200 |
Ideenmodellierer |
Added center / right alignment option to custom text display:
|
Wed, 07 Oct 2020 17:15:27 +0200 |
Ideenmodellierer |
Changed visualization of Depth / temperatur / debugview entry
|
Wed, 07 Oct 2020 17:12:44 +0200 |
Ideenmodellierer |
Increased max value for surface pressure:
|
Sun, 04 Oct 2020 15:50:43 +0200 |
heinrichsweikamp |
Added tag 1.5.5 release for changeset 02e7e11fdbe8
|
Fri, 25 Sep 2020 11:13:03 +0200 |
heinrichsweikamp |
increase version numbers, compile with TRUST_LOG_CONSISTENCY switch
1.5.5 release
|
Wed, 16 Sep 2020 10:52:57 +0200 |
heinrichsweikamp |
add current build
|
Tue, 15 Sep 2020 20:57:04 +0200 |
Ideenmodellierer |
Bugfix custom view selection dialog:
|
Tue, 15 Sep 2020 20:54:54 +0200 |
Ideenmodellierer |
Bugfix: No need to consider surface custom view in count of enabled view:
|
Tue, 15 Sep 2020 20:52:39 +0200 |
Ideenmodellierer |
Added skip condition in custom view selection:
|
Sun, 13 Sep 2020 20:59:38 +0200 |
Ideenmodellierer |
Added new option to gas configuration: "Off":
|
Sun, 13 Sep 2020 20:58:37 +0200 |
Ideenmodellierer |
Do not show gases in "Off" state in custom gas list:
|
Sun, 13 Sep 2020 20:55:54 +0200 |
Ideenmodellierer |
Added new option to gas configuration: "Off":
|
Sun, 13 Sep 2020 20:49:58 +0200 |
Ideenmodellierer |
Change color ID used in strings for light grey:
|
Sun, 13 Sep 2020 20:44:50 +0200 |
Ideenmodellierer |
Minor: Removed duplicated definition of number of available gases
|
Thu, 10 Sep 2020 20:52:47 +0200 |
Ideenmodellierer |
Changed string for data view selections:
|
Thu, 10 Sep 2020 20:51:36 +0200 |
Ideenmodellierer |
Added compile switch for motion control:
|
Thu, 10 Sep 2020 20:47:48 +0200 |
Ideenmodellierer |
Move Bigfont and motion Ctrl selection menu out of custom view submenu:
|
Tue, 08 Sep 2020 21:24:14 +0200 |
Ideenmodellierer |
Moved custom view menu to new tab:
|
Sun, 06 Sep 2020 22:11:51 +0200 |
Ideenmodellierer |
Reset Safety Stop display in case of a new descend:
|
Sun, 06 Sep 2020 21:17:59 +0200 |
Ideenmodellierer |
Added T3_gaslist:
|
Sun, 06 Sep 2020 21:15:34 +0200 |
Ideenmodellierer |
Added color coding for cv gas list:
|
Sun, 06 Sep 2020 21:13:22 +0200 |
Ideenmodellierer |
Added quick menu function to big font view:
|
Sun, 06 Sep 2020 21:09:37 +0200 |
Ideenmodellierer |
Added missing display of button labels in refresh function:
|
Wed, 16 Sep 2020 10:30:28 +0200 |
heinrichsweikamp |
Properly send compass 3 into sleepmode (end-2019 hardware)
|
Mon, 31 Aug 2020 20:06:59 +0200 |
heinrichsweikamp |
Merge
|
Sun, 30 Aug 2020 17:31:29 +0200 |
Ideenmodellierer |
Added new strings for the selection of T3 custom views
|
Sun, 30 Aug 2020 17:30:54 +0200 |
Ideenmodellierer |
Minor adaptions in page layout:
|
Sun, 30 Aug 2020 17:26:52 +0200 |
Ideenmodellierer |
Display warning in t7 using centered strings
|
Sun, 30 Aug 2020 17:26:00 +0200 |
Ideenmodellierer |
Show page number in small letters if more than 8 tabs are active
|
Sun, 30 Aug 2020 17:23:44 +0200 |
Ideenmodellierer |
Reimplementation of tMenuEdit_select:
|
Sun, 30 Aug 2020 17:20:16 +0200 |
Ideenmodellierer |
Added new menu tab into call structure
|
Sun, 30 Aug 2020 17:19:23 +0200 |
Ideenmodellierer |
Added new top level menu for customization of views
|
Sun, 30 Aug 2020 17:14:31 +0200 |
Ideenmodellierer |
Removed second big font profile
|
Mon, 24 Aug 2020 19:59:28 +0200 |
Ideenmodellierer |
Added worst case plausibility check (disabled by compile switch)
|
Mon, 24 Aug 2020 19:53:27 +0200 |
Ideenmodellierer |
Bugfix display of disabled screen.
|
Mon, 24 Aug 2020 19:43:13 +0200 |
Ideenmodellierer |
Bugfix display of disabled screen.
|
Mon, 24 Aug 2020 19:39:28 +0200 |
Ideenmodellierer |
Bugfix right alignment of dualfont strings
|
Mon, 24 Aug 2020 19:36:18 +0200 |
Ideenmodellierer |
Added possibility to switch between "classic" bigfont views and a selection with a new information combination
|
Mon, 24 Aug 2020 19:31:05 +0200 |
Ideenmodellierer |
Added compile switch to enable / disable new BigFont layout
|
Mon, 24 Aug 2020 19:30:15 +0200 |
Ideenmodellierer |
Added dew parameter to enable selection of customer BigFont screens to be displayed
|
Mon, 24 Aug 2020 19:59:28 +0200 |
Ideenmodellierer |
Added worst case plausibility check (disabled by compile switch)
|
Mon, 24 Aug 2020 19:53:27 +0200 |
Ideenmodellierer |
Bugfix display of disabled screen.
|
Mon, 24 Aug 2020 19:43:13 +0200 |
Ideenmodellierer |
Bugfix display of disabled screen.
|
Mon, 24 Aug 2020 19:39:28 +0200 |
Ideenmodellierer |
Bugfix right alignment of dualfont strings
|
Mon, 24 Aug 2020 19:36:18 +0200 |
Ideenmodellierer |
Added possibility to switch between "classic" bigfont views and a selection with a new information combination
|
Thu, 20 Aug 2020 21:25:38 +0200 |
Ideenmodellierer |
Added compiler switch for existing debug view parameter
|
Mon, 10 Aug 2020 15:53:45 +0200 |
heinrichsweikamp |
Added tag v1.5.4 release for changeset e9ca66ce36e5
|
Wed, 22 Jul 2020 11:55:53 +0200 |
heinrichsweikamp |
1.5.4 release
v1.5.4 release
|
Mon, 29 Jun 2020 16:18:17 +0200 |
heinrichsweikamp |
add wiki sub-directory
|
Sat, 27 Jun 2020 18:40:32 +0200 |
heinrichsweikamp |
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
|
Tue, 26 May 2020 19:27:07 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/FixLayout_Header_LogView (pull request #46)
|
Tue, 26 May 2020 21:13:12 +0200 |
ideenmodellierer |
Bugfix header EEPROM layout:
FixLayout_Header_LogView
|
Tue, 26 May 2020 21:13:00 +0200 |
ideenmodellierer |
Bugfix right alignment of string:
FixLayout_Header_LogView
|
Tue, 26 May 2020 21:12:46 +0200 |
ideenmodellierer |
Small corrections layout Divelog page 1:
FixLayout_Header_LogView
|
Tue, 26 May 2020 21:12:02 +0200 |
ideenmodellierer |
Development option only read bottledata:
FixLayout_Header_LogView
|
Tue, 19 May 2020 07:27:18 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Improve_Button_Sleep (pull request #45)
|
Mon, 18 May 2020 21:51:08 +0200 |
ideenmodellierer |
Bugfix calculation of string center position:
Improve_Button_Sleep
|
Wed, 13 May 2020 21:56:35 +0200 |
ideenmodellierer |
Code cleanup pressure plausibility check:
Improve_Button_Sleep
|
Wed, 13 May 2020 21:27:30 +0200 |
ideenmodellierer |
Bugfix unintended else condition:
Improve_Button_Sleep
|
Tue, 12 May 2020 23:03:50 +0200 |
ideenmodellierer |
Development option only: Show Pressure update for a short time in the custom field (as warning)
Improve_Button_Sleep
|
Tue, 12 May 2020 23:03:29 +0200 |
ideenmodellierer |
Only switch between "no fly" and "desaturation" in case there is desaturation time left:
Improve_Button_Sleep
|
Tue, 12 May 2020 22:54:19 +0200 |
ideenmodellierer |
Balance value of button responsitivness were not considered during firmware startup:
Improve_Button_Sleep
|
Tue, 12 May 2020 22:52:05 +0200 |
ideenmodellierer |
Changed default values:
Improve_Button_Sleep
|
Tue, 12 May 2020 22:42:52 +0200 |
ideenmodellierer |
Added error detection for reading of ADC values in sleep mode:
Improve_Button_Sleep
|
Tue, 12 May 2020 22:39:18 +0200 |
ideenmodellierer |
Do not signal power on reset in case of a "warm" reset:
Improve_Button_Sleep
|
Tue, 28 Apr 2020 15:37:47 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/fix-bat-2 (pull request #44)
|
Wed, 22 Apr 2020 13:08:57 +0200 |
Jan Mulder |
bugfix: implement battery charge percentage in dive header
fix-bat-2
|
Wed, 15 Apr 2020 07:01:11 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Improve_Logtansfer (pull request #42)
|
Tue, 14 Apr 2020 19:45:34 +0200 |
ideenmodellierer |
Removed no longer needed reset profile function:
Improve_Logtansfer
|
Tue, 14 Apr 2020 19:44:19 +0200 |
ideenmodellierer |
Moved and deactivated analyse sample buffer switch:
Improve_Logtansfer
|
Tue, 14 Apr 2020 19:29:23 +0200 |
ideenmodellierer |
Cmd Get profile: transmit dummy profile if necessary
Improve_Logtansfer
|
Tue, 14 Apr 2020 19:27:04 +0200 |
ideenmodellierer |
Removed invalidate header function because it is no lonnger needed
Improve_Logtansfer
|
Tue, 14 Apr 2020 19:22:56 +0200 |
ideenmodellierer |
Compare profile length from header and sample data to identify valid profiles
Improve_Logtansfer
|
Mon, 13 Apr 2020 16:00:54 +0200 |
ideenmodellierer |
Added compile switch to handle additional data during raw header request:
Improve_Logtansfer
|
Sun, 12 Apr 2020 21:02:34 +0200 |
ideenmodellierer |
Added function to transfer sample buffer:
Improve_Logtansfer
|
Wed, 08 Apr 2020 16:34:54 +0200 |
heinrichsweikamp |
Power-down Bluetooth on COMM exit
|
Mon, 30 Mar 2020 13:16:11 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/minor_improvments (pull request #41)
|
Sun, 29 Mar 2020 21:55:00 +0200 |
Ideenmodellierer |
merged default into minor_improvments
minor_improvments
|
Sun, 29 Mar 2020 21:39:57 +0200 |
ideenmodellierer |
Activated reset of sample information within header data at time of sector erasing:
minor_improvments
|
Sat, 28 Mar 2020 21:41:47 +0100 |
ideenmodellierer |
Added ppO2 to dummy profile data:
minor_improvments
|
Tue, 24 Mar 2020 22:32:48 +0100 |
ideenmodellierer |
Eliminated some minor warnings
minor_improvments
|
Tue, 24 Mar 2020 22:14:16 +0100 |
ideenmodellierer |
Transfer a dummy profile in case of missing sample information:
minor_improvments
|
Tue, 24 Mar 2020 22:12:08 +0100 |
ideenmodellierer |
Reactivated samples for bottle pressure information:
minor_improvments
|
Tue, 24 Mar 2020 22:08:29 +0100 |
ideenmodellierer |
Reactivated samples for bottle pressure information:
minor_improvments
|
Tue, 24 Mar 2020 21:59:38 +0100 |
ideenmodellierer |
Added compile variant enabling the reset of profile sample information:
minor_improvments
|
Tue, 24 Mar 2020 21:59:11 +0100 |
ideenmodellierer |
Added compile variant enabling the reset of profile sample information:
minor_improvments
|
Tue, 24 Mar 2020 21:49:52 +0100 |
ideenmodellierer |
Allocate received bar value to active gas (was static allocated to gas[1])
minor_improvments
|
Tue, 24 Mar 2020 21:48:27 +0100 |
ideenmodellierer |
Added new compile switches for variants:
minor_improvments
|
Mon, 23 Mar 2020 21:14:54 +0100 |
ideenmodellierer |
Added initialization of bottle sensor data age counter
minor_improvments
|
Mon, 23 Mar 2020 21:13:52 +0100 |
ideenmodellierer |
Added compile switch to show voltage parallel to charge status percantage
minor_improvments
|
Mon, 23 Mar 2020 21:10:02 +0100 |
ideenmodellierer |
Added compile switch var firmware variant which does trust the memory log => does not check the log consistency at startu (used for test purpose)
minor_improvments
|
Thu, 05 Mar 2020 22:31:50 +0100 |
ideenmodellierer |
Introduced configuration header for variant managment:
minor_improvments
|
Thu, 05 Mar 2020 22:27:55 +0100 |
ideenmodellierer |
Removed duplicated definition:
minor_improvments
|
Sat, 29 Feb 2020 22:27:29 +0100 |
ideenmodellierer |
Introduced enum for lower left corner view selection:
minor_improvments
|
Sat, 29 Feb 2020 22:27:04 +0100 |
ideenmodellierer |
Introduced enum for lower left corner view selection:
minor_improvments
|
Sat, 29 Feb 2020 22:25:20 +0100 |
ideenmodellierer |
Introduced enum for lower left corner view selection:
minor_improvments
|
Sun, 01 Mar 2020 10:06:45 +0100 |
heinrichsweikamp |
fix potential issue with >255 dives in the logbook
|
Thu, 27 Feb 2020 09:13:25 +0100 |
heinrichsweikamp |
Added tag v1.5.3 release for changeset 5b4c78c36b04
|
Thu, 27 Feb 2020 09:13:08 +0100 |
heinrichsweikamp |
1.5.3 release
v1.5.3 release
|
Mon, 24 Feb 2020 15:17:54 +0100 |
heinrichsweikamp |
update the 1.5.3 for tests
|
Mon, 24 Feb 2020 07:58:37 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Improve_BatteryGasGauge (pull request #40)
|
Sun, 23 Feb 2020 21:18:49 +0100 |
ideenmodellierer |
Moved power on detection to RTE:
Improve_BatteryGasGauge
|
Sun, 23 Feb 2020 21:17:17 +0100 |
ideenmodellierer |
Bugfix display battery voltage in maintainance menu:
Improve_BatteryGasGauge
|
Sun, 23 Feb 2020 21:13:28 +0100 |
ideenmodellierer |
Reduced timeout for common UART communication:
Improve_BatteryGasGauge
|
Sun, 23 Feb 2020 21:09:56 +0100 |
ideenmodellierer |
Detect startup after power off:
Improve_BatteryGasGauge
|
Tue, 18 Feb 2020 12:41:45 +0100 |
heinrichsweikamp |
show battery percent and voltage and surfacemode. That gives additional
|
Tue, 18 Feb 2020 09:58:52 +0100 |
heinrichsweikamp |
make a 1.5.3 for tests
|
Tue, 18 Feb 2020 07:20:29 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/ImprovmentNVM_2 (pull request #39)
|
Mon, 17 Feb 2020 19:43:09 +0100 |
ideenmodellierer |
Marked possible code improvment for future activities:
ImprovmentNVM_2
|
Mon, 17 Feb 2020 19:04:10 +0100 |
ideenmodellierer |
Activated ringbuffer for settings:
ImprovmentNVM_2
|
Sun, 16 Feb 2020 22:04:52 +0100 |
ideenmodellierer |
Activated ringbuffer for settings:
ImprovmentNVM_2
|
Sat, 15 Feb 2020 20:50:58 +0100 |
ideenmodellierer |
Added function to analyse the sampel ringbuffer:
ImprovmentNVM_2
|
Sat, 15 Feb 2020 20:50:20 +0100 |
ideenmodellierer |
Added function to analyse the sampel ringbuffer:
ImprovmentNVM_2
|
Sat, 15 Feb 2020 20:45:19 +0100 |
ideenmodellierer |
Added (optional) menu item to analyse log sample buffer:
ImprovmentNVM_2
|
Mon, 10 Feb 2020 19:40:33 +0100 |
ideenmodellierer |
ext_Flash_write_sample erase sector optimization:
ImprovmentNVM_2
|
Mon, 10 Feb 2020 19:29:12 +0100 |
ideenmodellierer |
Moved Timeout handling out of 100ms callback:
ImprovmentNVM_2
|
Mon, 10 Feb 2020 19:25:09 +0100 |
ideenmodellierer |
Enable sequentionel writing of device data:
ImprovmentNVM_2
|
Mon, 10 Feb 2020 19:15:27 +0100 |
ideenmodellierer |
Optimize ef_write_block function:
ImprovmentNVM_2
|
Mon, 10 Feb 2020 08:23:15 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/maintain-2 (pull request #38)
|
Fri, 07 Feb 2020 16:38:11 +0100 |
Jan Mulder |
Added tag v1.5.2.beta release for changeset 54a480c43e97
maintain-2
|
Wed, 15 Jan 2020 13:41:01 +0100 |
heinrichsweikamp |
1.5.2 beta with RTE 2.02
v1.5.2.beta release
|
Wed, 15 Jan 2020 10:53:15 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Improment_NVM (pull request #37)
|
Tue, 14 Jan 2020 21:52:15 +0100 |
Ideenmodellierer |
merged default into Improvment_NVM
Improment_NVM
|
Tue, 14 Jan 2020 21:38:45 +0100 |
ideenmodellierer |
Added compile switch for restoring of last known date after power lost:
Improment_NVM
|
Tue, 14 Jan 2020 21:10:37 +0100 |
ideenmodellierer |
Bugfix Flipdisplay Gauge and Apnoe mode:
Improment_NVM
|
Tue, 14 Jan 2020 21:08:45 +0100 |
ideenmodellierer |
Bugfix: Warnings displayed in Gauge Mode:
Improment_NVM
|
Mon, 13 Jan 2020 20:27:57 +0100 |
ideenmodellierer |
Bugfix: Limit log length in case of corrupted sample storage:
Improment_NVM
|
Sun, 12 Jan 2020 21:33:13 +0100 |
ideenmodellierer |
Bugfix display compass calibration frozen:
Improment_NVM
|
Sun, 12 Jan 2020 19:55:22 +0100 |
ideenmodellierer |
Restore last known date: After a power off RTC looses time data and restarts in the year 2000. Code will fix this date to the year 2016. This change will set the date to the last known date of the operation hour counter
Improment_NVM
|
Sun, 12 Jan 2020 19:50:14 +0100 |
ideenmodellierer |
Bugfix invalid voltage / temperatur after coldstart:
Improment_NVM
|
Sun, 12 Jan 2020 18:06:59 +0100 |
ideenmodellierer |
Bugfix parallel call of external flash functions:
Improment_NVM
|
Sun, 12 Jan 2020 17:57:11 +0100 |
ideenmodellierer |
Bugfix Min max values for device data checks:
Improment_NVM
|
Sun, 12 Jan 2020 17:47:02 +0100 |
ideenmodellierer |
Bugfix Display of Sensor values:
Improment_NVM
|
Sun, 12 Jan 2020 17:45:36 +0100 |
ideenmodellierer |
Bugfix: display of time of minimum voltag:
Improment_NVM
|
Wed, 08 Jan 2020 15:35:15 +0100 |
heinrichsweikamp |
We got one report of false/freezd depth reading when jumping into 2m depth
|
Sun, 05 Jan 2020 14:57:50 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/ImproveBluetooth (pull request #36)
|
Sun, 29 Dec 2019 09:42:16 +0100 |
Ideenmodellierer |
merged default into ImproveBluetooth
ImproveBluetooth
|
Sat, 28 Dec 2019 19:42:04 +0100 |
ideenmodellierer |
Added retry through power off/on cycle:
ImproveBluetooth
|
Sat, 21 Dec 2019 20:21:26 +0100 |
ideenmodellierer |
Revert change to keep connection open in case of BlueMod messages:
ImproveBluetooth
|
Mon, 02 Dec 2019 22:03:05 +0100 |
ideenmodellierer |
Bugfix: Merge / cleanup problem:
ImproveBluetooth
|
Sun, 01 Dec 2019 19:55:15 +0100 |
ideenmodellierer |
Added missing enum for configuration states
ImproveBluetooth
|
Tue, 26 Nov 2019 22:12:25 +0100 |
ideenmodellierer |
Added function for BlueMod configuration:
ImproveBluetooth
|
Tue, 26 Nov 2019 21:17:57 +0100 |
ideenmodellierer |
Added start of module configuration after eache modul power on
ImproveBluetooth
|
Tue, 26 Nov 2019 21:16:36 +0100 |
ideenmodellierer |
Added start of module configuration after eache modul power on
ImproveBluetooth
|
Tue, 26 Nov 2019 21:14:58 +0100 |
ideenmodellierer |
Configurate FlowCntrl Pins as noPull
ImproveBluetooth
|
Tue, 26 Nov 2019 18:13:26 +0100 |
ideenmodellierer |
Bugfix negativ ascend bar:
ImproveBluetooth
|
Tue, 26 Nov 2019 18:02:48 +0100 |
ideenmodellierer |
Move Constants and libm to start of firmware ROM block:
ImproveBluetooth
|
Mon, 02 Dec 2019 07:56:47 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/maintain-1 (pull request #35)
|
Sun, 01 Dec 2019 17:28:35 +0100 |
Jan Mulder |
Fix case for case sensitive OS
maintain-1
|
Sun, 01 Dec 2019 17:12:27 +0100 |
Jan Mulder |
Added tag v1.5.1 release for changeset afa55a50cc72
maintain-1
|
Sun, 24 Nov 2019 15:46:58 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/MotionDetection (pull request #34)
|
Mon, 21 Oct 2019 21:16:53 +0200 |
ideenmodellierer |
Added key direction awarness to t3, t5 and t6 views:
MotionDetection
|
Mon, 21 Oct 2019 18:37:43 +0200 |
ideenmodellierer |
Finetune parameter for detection of small sectors as used for the pitch detection
MotionDetection
|
Thu, 17 Oct 2019 23:09:17 +0200 |
ideenmodellierer |
Consider number of available t3 views in sector handling:
MotionDetection
|
Thu, 17 Oct 2019 21:15:42 +0200 |
ideenmodellierer |
Combine variables in a structure to improve readability of code
MotionDetection
|
Thu, 10 Oct 2019 22:26:03 +0200 |
Ideenmodellierer |
merge default
MotionDetection
|
Thu, 10 Oct 2019 22:11:59 +0200 |
ideenmodellierer |
Simplified pitch detection state machine:
MotionDetection
|
Thu, 10 Oct 2019 22:09:52 +0200 |
ideenmodellierer |
Minor code cleanup
MotionDetection
|
Mon, 16 Sep 2019 22:49:34 +0200 |
ideenmodellierer |
Added missing customerview selection
MotionDetection
|
Mon, 16 Sep 2019 22:46:24 +0200 |
ideenmodellierer |
Incremented "idle window" for scroll detection
MotionDetection
|
Mon, 16 Sep 2019 20:57:40 +0200 |
ideenmodellierer |
Motion events effect custom view in dive mode only
MotionDetection
|
Mon, 16 Sep 2019 20:21:06 +0200 |
ideenmodellierer |
Added string for Empty/ Debug custom view selection
MotionDetection
|
Tue, 10 Sep 2019 20:51:55 +0200 |
ideenmodellierer |
Use Enum values for initialization and setting check:
MotionDetection
|
Sun, 08 Sep 2019 13:45:43 +0200 |
ideenmodellierer |
Removed some warnings
MotionDetection
|
Sun, 08 Sep 2019 13:45:17 +0200 |
ideenmodellierer |
Add scroll event by pitch angle detection:
MotionDetection
|
Mon, 19 Aug 2019 17:50:55 +0200 |
Ideenmodellierer |
merged default into MotionDetection
MotionDetection
|
Mon, 19 Aug 2019 17:39:47 +0200 |
ideenmodellierer |
Added parameter for number of sectors to be defined
MotionDetection
|
Tue, 13 Aug 2019 21:13:54 +0200 |
ideenmodellierer |
Changed function names from shake to pitch and improved detection function: Shake might be confusing for people reading the code because pitch values are ased for calculation => changed name to pitch to be more transparent
MotionDetection
|
Tue, 13 Aug 2019 21:12:17 +0200 |
ideenmodellierer |
Added a function to count the active custom views.
MotionDetection
|
Tue, 13 Aug 2019 21:10:46 +0200 |
ideenmodellierer |
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
MotionDetection
|
Sat, 20 Jul 2019 21:42:45 +0200 |
Ideenmodellierer |
Merge default
MotionDetection
|
Mon, 17 Jun 2019 19:56:38 +0200 |
ideenmodellierer |
Fix misalignment of do while loop
MotionDetection
|
Mon, 17 Jun 2019 19:53:01 +0200 |
ideenmodellierer |
Bugfix: selection of current view not working
MotionDetection
|
Mon, 17 Jun 2019 19:47:07 +0200 |
ideenmodellierer |
Update call of motion detection function
MotionDetection
|
Mon, 17 Jun 2019 19:46:18 +0200 |
ideenmodellierer |
Reworked detection function
MotionDetection
|
Tue, 11 Jun 2019 05:31:07 +0200 |
Ideenmodellierer |
Parameter update
MotionDetection
|
Tue, 11 Jun 2019 05:30:09 +0200 |
Ideenmodellierer |
Pass action to customer vie update function.
MotionDetection
|
Fri, 24 May 2019 22:01:46 +0200 |
ideenmodellierer |
Added trigger of middle button action in case of a detected shake
MotionDetection
|
Fri, 24 May 2019 22:00:38 +0200 |
ideenmodellierer |
Added new files for motion detection (shaking) detection
MotionDetection
|
Sun, 24 Nov 2019 16:08:29 +0100 |
heinrichsweikamp |
Add Support for new end-2019 hardware:
|
Sat, 23 Nov 2019 18:39:50 +0100 |
heinrichsweikamp |
Add Support for new end-2019 hardware:
|
Sat, 23 Nov 2019 15:36:38 +0100 |
heinrichsweikamp |
Add Support for new end-2019 hardware:
|
Wed, 09 Oct 2019 20:05:47 +0200 |
heinrichsweikamp |
Make a FW 1.5.1 / RTE 2.0 binary for testing
v1.5.1 release
|
Wed, 09 Oct 2019 07:08:43 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/fix-merge-mess (pull request #33)
|
Tue, 08 Oct 2019 16:41:57 +0200 |
Jan Mulder |
Added tag v1.5.0 release for changeset 143fe85f82a2
fix-merge-mess
|
Tue, 08 Oct 2019 16:35:45 +0200 |
Jan Mulder |
Fix merge problem
fix-merge-mess
|
Sun, 06 Oct 2019 14:12:41 +0200 |
heinrichsweikamp |
Merge
|
Sun, 06 Oct 2019 11:58:36 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/FlightMode_Improvment (pull request #32)
|
Thu, 03 Oct 2019 21:39:28 +0200 |
ideenmodellierer |
Decrease ManualExitDiveCounter in surface mode
FlightMode_Improvment
|
Thu, 03 Oct 2019 21:34:52 +0200 |
ideenmodellierer |
Minor changes to debug view
FlightMode_Improvment
|
Thu, 03 Oct 2019 21:33:47 +0200 |
ideenmodellierer |
Added option to manually leave dive mode to system menu
FlightMode_Improvment
|
Thu, 03 Oct 2019 21:30:16 +0200 |
ideenmodellierer |
Added function to support manuel exit of dive mode
FlightMode_Improvment
|
Thu, 03 Oct 2019 21:26:46 +0200 |
ideenmodellierer |
Added function to evaluate the state of the surface pressure history memory
FlightMode_Improvment
|
Tue, 01 Oct 2019 19:58:58 +0200 |
ideenmodellierer |
Removed not used wireless menu items
FlightMode_Improvment
|
Tue, 01 Oct 2019 19:43:30 +0200 |
ideenmodellierer |
Added compile switch to enable debug view option in system menu
FlightMode_Improvment
|
Tue, 01 Oct 2019 19:13:41 +0200 |
ideenmodellierer |
Removed averaging of pressure and temperatur values
FlightMode_Improvment
|
Sun, 06 Oct 2019 14:07:51 +0200 |
heinrichsweikamp |
change max. allowed surface pressure to 1030hPa (As in the small OSTC)
|
Mon, 19 Aug 2019 11:42:31 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/PressureMeasure_Improvment (pull request #31)
|
Sat, 17 Aug 2019 19:03:47 +0200 |
ideenmodellierer |
Apply averaging to pressure measurement: In pre versions calculated pressure value jittered +/-10hPa. Since we measure the pressure several time a second but only use one value a second, calc average including not used values
PressureMeasure_Improvment
|
Sat, 17 Aug 2019 18:57:15 +0200 |
ideenmodellierer |
Added function to avoid divemode activation during Landing:
PressureMeasure_Improvment
|
Sat, 17 Aug 2019 18:47:08 +0200 |
ideenmodellierer |
Set Max value for pressure offset to 50mBar (20mBar before)
PressureMeasure_Improvment
|
Sat, 17 Aug 2019 18:44:43 +0200 |
ideenmodellierer |
Show actual instead of surface (30minute old) pressure if the actual differs significant (e.g. in plane or during pressure testing)
PressureMeasure_Improvment
|
Tue, 13 Aug 2019 21:46:26 +0200 |
ideenmodellierer |
Use average calculation for pressure: precondition was that pressure values jittered +- 10 HPa from one capture (once a second) to the other. Basically pressure is measured several times a second => using these values in an additional history calculation reduces the jitter down to +-1 per second
PressureMeasure_Improvment
|
Sun, 04 Aug 2019 11:01:06 +0200 |
heinrichsweikamp |
building a 1.5
v1.5.0 release
|
Sat, 20 Jul 2019 10:44:01 +0200 |
heinrichsweikamp |
add update files for testing purposes
|
Thu, 18 Jul 2019 14:26:56 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/I2C_Improvment (pull request #30)
|
Wed, 17 Jul 2019 22:43:51 +0200 |
ideenmodellierer |
Added plausibility check for pressure values
I2C_Improvment
|
Wed, 17 Jul 2019 22:43:16 +0200 |
ideenmodellierer |
Added check of configuration.
I2C_Improvment
|
Wed, 17 Jul 2019 22:42:55 +0200 |
ideenmodellierer |
Improved startup robustness
I2C_Improvment
|
Wed, 17 Jul 2019 22:42:15 +0200 |
ideenmodellierer |
Set I2C speed to 88kHz, use digital filter only and reworked idle clock recovery
I2C_Improvment
|
Wed, 17 Jul 2019 22:41:31 +0200 |
ideenmodellierer |
Deactivated internal pullups and I2C interrupt callback
I2C_Improvment
|
Mon, 01 Jul 2019 14:18:39 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/fix-batt-1 (pull request #29)
|
Thu, 20 Jun 2019 14:24:57 +0200 |
Jan Mulder |
bugfix: implement battery at end in dive header
fix-batt-1
|
Sun, 30 Jun 2019 22:12:15 +0200 |
heinrichsweikamp |
increase RTE to 1.9 and Firmware to 1.4.9 beta
|
Sun, 30 Jun 2019 19:52:46 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/O2_SensorSync (pull request #28)
|
Sun, 30 Jun 2019 21:25:58 +0200 |
ideenmodellierer |
Added start of frame detection for HUD data
O2_SensorSync
|
Sun, 30 Jun 2019 21:18:05 +0200 |
ideenmodellierer |
Moved indication variable for received HUD data to tCCR file.
O2_SensorSync
|
Wed, 19 Jun 2019 13:12:25 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/fix-version (pull request #27)
|
Wed, 19 Jun 2019 14:31:50 +0200 |
Jan Mulder |
bugfix: correct packed main version number in dive header
fix-version
|
Wed, 19 Jun 2019 13:12:01 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Bugfix_Flip_FirmwareUpdate (pull request #26)
|
Mon, 17 Jun 2019 21:47:54 +0200 |
ideenmodellierer |
Resolved warning
Bugfix_Flip_FirmwareUpdate
|
Mon, 17 Jun 2019 21:47:33 +0200 |
ideenmodellierer |
Bugfix text display in update mode (flipped display) and reduction of timeout in case of a failed firmware update
Bugfix_Flip_FirmwareUpdate
|
Mon, 17 Jun 2019 21:47:19 +0200 |
ideenmodellierer |
Bugfix Overview, O2 values and mV in flip display mode
Bugfix_Flip_FirmwareUpdate
|
Mon, 17 Jun 2019 21:46:56 +0200 |
ideenmodellierer |
Reinitialize logos after flip of display
Bugfix_Flip_FirmwareUpdate
|
Sat, 01 Jun 2019 10:12:15 +0200 |
heinrichsweikamp |
Minor: Remove unused compass header file. The LSM303DLHC is not used in any hardware sold.
|
Fri, 31 May 2019 06:22:50 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/cleanup-4 (pull request #25)
|
Wed, 29 May 2019 14:02:27 +0200 |
Jan Mulder |
bugfix: make stopwatch and divetime run in sync
cleanup-4
|
Sun, 26 May 2019 10:09:22 +0200 |
Jan Mulder |
Make dive mode detection more advanced
cleanup-4
|
Fri, 24 May 2019 09:29:29 +0200 |
Jan Mulder |
cleanup: factor out SHelper typedef (and more)
cleanup-4
|
Fri, 24 May 2019 09:02:46 +0200 |
Jan Mulder |
cleanup: introduce function setAvgDepth
cleanup-4
|
Wed, 22 May 2019 22:22:15 +0200 |
Jan Mulder |
cleanup: factor out unused stopwatch code
cleanup-4
|
Wed, 22 May 2019 14:39:04 +0200 |
Jan Mulder |
bugfix, cleanup: do not clip depth to 0
cleanup-4
|
Tue, 21 May 2019 11:11:05 +0200 |
Jan Mulder |
bugfix, consistency: show deco/NDL really after 1 minute divetime
cleanup-4
|
Mon, 20 May 2019 13:06:02 +0200 |
Jan Mulder |
bugfix, simulator: fix the 1 sec difference between stopwatch and divetime
cleanup-4
|
Mon, 20 May 2019 12:57:31 +0200 |
Jan Mulder |
bugfix, cleanup: simplify stopwatch logic and fix fallout
cleanup-4
|
Mon, 20 May 2019 10:13:44 +0200 |
Jan Mulder |
bugfix, cleanup: keep both is_ambient_pressure_close_to_surface in sync
cleanup-4
|
Mon, 20 May 2019 10:05:27 +0200 |
Jan Mulder |
cleanup, RTE: factor out scheduleCheck_pressure_reached_dive_mode_level
cleanup-4
|
Fri, 17 May 2019 21:19:04 +0200 |
Jan Mulder |
cleanup: remove commented/unused code, make static
cleanup-4
|
Fri, 17 May 2019 06:38:56 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/cleanup-3 (pull request #24)
|
Thu, 16 May 2019 14:02:46 +0200 |
Jan Mulder |
Bugfix: fix drawing of CCR bailout profile
cleanup-3
|
Thu, 16 May 2019 08:56:15 +0200 |
Jan Mulder |
cleanup: remove unused code, make static, remove commented code
cleanup-3
|
Thu, 16 May 2019 08:54:33 +0200 |
Jan Mulder |
Possible bugfix: do not use bitwise and (&)
cleanup-3
|
Mon, 13 May 2019 13:37:34 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/div-fixes-6 (pull request #23)
|
Sun, 12 May 2019 09:45:32 +0200 |
Jan Mulder |
Added tag v1.4.8 release for changeset ba9d99a2e310
div-fixes-6
|
Thu, 02 May 2019 10:05:28 +0200 |
Jan Mulder |
bugfix, consistency: show deco, NDL after 1 minute
div-fixes-6
|
Thu, 02 May 2019 09:24:54 +0200 |
Jan Mulder |
translate: nullzeit -> ndl
div-fixes-6
|
Thu, 02 May 2019 09:16:07 +0200 |
Jan Mulder |
Deco Models: limit NDL to 240 minutes
div-fixes-6
|
Thu, 02 May 2019 08:43:07 +0200 |
Jan Mulder |
VPM, cleanup: 1st round
div-fixes-6
|
Mon, 29 Apr 2019 19:45:25 +0200 |
Jan Mulder |
cleanup: remove unused code
div-fixes-6
|
Mon, 29 Apr 2019 19:43:05 +0200 |
Jan Mulder |
cleanup: no useless checks for simulator state
div-fixes-6
|
Mon, 06 May 2019 15:45:19 +0200 |
heinrichsweikamp |
Update the release file for testing. Rev 286 did not include the 1.4.8 (non-beta) firmware.
v1.4.8 release
|
Mon, 06 May 2019 09:00:58 +0200 |
heinrichsweikamp |
Minor: Some Texts fixed, allign RTErequired* values with RTE firmware
|
Sun, 05 May 2019 11:06:02 +0200 |
heinrichsweikamp |
add update files for testing purposes
|
Thu, 02 May 2019 11:12:25 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/ndl-in-logbook (pull request #22)
|
Thu, 02 May 2019 13:08:17 +0200 |
Jan Mulder |
Bugfix: write NDL in logbook correctly
ndl-in-logbook
|
Wed, 01 May 2019 14:45:47 +0200 |
heinrichsweikamp |
translate some comments into english
|
Wed, 01 May 2019 14:39:46 +0200 |
heinrichsweikamp |
Fix typos (There are still many...)
|
Mon, 29 Apr 2019 19:25:24 +0200 |
heinrichsweikamp |
Make RTE show as 1.8.0 beta, add update files for testing purposes
|
Sun, 28 Apr 2019 17:57:39 +0200 |
heinrichsweikamp |
add update files for testing purposes
|
Sun, 28 Apr 2019 15:54:46 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/IPC_Sync_Improvment_3 (pull request #21)
|
Sun, 28 Apr 2019 10:16:38 +0200 |
ideenmodellierer |
Rework SPI error handling.
IPC_Sync_Improvment_3
|
Sun, 28 Apr 2019 10:06:27 +0200 |
ideenmodellierer |
Rework pressure/ temperature data aquisition
IPC_Sync_Improvment_3
|
Sun, 28 Apr 2019 09:54:43 +0200 |
ideenmodellierer |
Do not mark data as valid if devicedata is received.
IPC_Sync_Improvment_3
|
Sun, 28 Apr 2019 09:41:43 +0200 |
heinrichsweikamp |
add update files for testing purposes, bump to 1.4.8 beta / RTE 1.7.1 beta
|
Sun, 28 Apr 2019 07:05:23 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/write-from-sim (pull request #20)
|
Sat, 27 Apr 2019 12:27:46 +0200 |
Jan Mulder |
cleanup: simplify stateUsed usage
write-from-sim
|
Sat, 27 Apr 2019 09:32:16 +0200 |
Jan Mulder |
cleanup: also write gas and setpoint changes in simulator mode
write-from-sim
|
Wed, 24 Apr 2019 17:10:51 +0200 |
Jan Mulder |
feature, debug: make simulator write a logbook entry
write-from-sim
|
Tue, 23 Apr 2019 21:03:24 +0200 |
Jan Mulder |
cleanup: do not pass large struct by value
write-from-sim
|
Tue, 23 Apr 2019 17:41:20 +0200 |
Jan Mulder |
cleanup: make things static where possible.
write-from-sim
|
Fri, 26 Apr 2019 10:36:11 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/IPC_Sync_Improvment_2 (pull request #18)
|
Sun, 14 Apr 2019 14:27:32 +0200 |
ideenmodellierer |
Added batch to copy bins from release folder
IPC_Sync_Improvment_2
|
Sun, 14 Apr 2019 14:22:41 +0200 |
ideenmodellierer |
Increase SPI com timeout for cold start and wake up
IPC_Sync_Improvment_2
|
Sun, 14 Apr 2019 11:43:29 +0200 |
ideenmodellierer |
Sync to Main 100ms time stamp & added Reinitialization of globals after startup
IPC_Sync_Improvment_2
|
Sun, 14 Apr 2019 11:38:14 +0200 |
ideenmodellierer |
Forward 100ms time stamp to RTE and handle logbook in main loop
IPC_Sync_Improvment_2
|
Tue, 23 Apr 2019 14:21:32 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/bm-3 (pull request #19)
|
Tue, 23 Apr 2019 13:05:20 +0200 |
Jan Mulder |
Bugfix: do not reset saturation on surfacing
bm-3
|
Tue, 23 Apr 2019 09:25:18 +0200 |
Jan Mulder |
Added tag V1.4.7 release for changeset 1b9be6040d82
bm-3
|
Mon, 15 Apr 2019 17:35:47 +0200 |
Jan Mulder |
feature: allow new saturation to be set in lower left corner
bm-3
|
Fri, 12 Apr 2019 22:00:07 +0200 |
Jan Mulder |
Buehlmann: factor out another global gDecotable
bm-3
|
Fri, 12 Apr 2019 21:04:52 +0200 |
Jan Mulder |
Buehlmann: factor out gNDL and gTTS
bm-3
|
Fri, 12 Apr 2019 19:05:49 +0200 |
Jan Mulder |
Buehlmann: trivial performance improvement (NDL)
bm-3
|
Fri, 12 Apr 2019 15:26:14 +0200 |
Jan Mulder |
Buehlmann: cleanup, factor out pBuDiveSettings
bm-3
|
Fri, 12 Apr 2019 14:46:48 +0200 |
Jan Mulder |
Buehlmann: cleanup, remove global pDecolistBuehlmann
bm-3
|
Fri, 12 Apr 2019 10:43:52 +0200 |
Jan Mulder |
Buehlmann: cleanup, whitespace, static
bm-3
|
Sat, 13 Apr 2019 14:36:33 +0200 |
heinrichsweikamp |
Minor: Typo fixed in bootloader screen
V1.4.7 release
|
Fri, 12 Apr 2019 07:22:14 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/bm-2 (pull request #17)
|
Thu, 11 Apr 2019 17:48:48 +0200 |
Jan Mulder |
Buelmann: new implementation for ceiling
bm-2
|
Thu, 11 Apr 2019 10:26:22 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/bm-1 (pull request #16)
|
Wed, 10 Apr 2019 17:55:46 +0200 |
Jan Mulder |
Fix stupid commit error
bm-1
|
Tue, 09 Apr 2019 16:30:21 +0200 |
Jan Mulder |
feature: Relative GF to Saturation renames
bm-1
|
Tue, 09 Apr 2019 15:38:31 +0200 |
Jan Mulder |
feature: replace Relative GF by saturation, computational only
bm-1
|
Wed, 10 Apr 2019 11:04:56 +0200 |
heinrichsweikamp |
add update files for testing purposes
|
Tue, 09 Apr 2019 08:52:44 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/div-fixes-5 (pull request #15)
|
Mon, 08 Apr 2019 12:35:59 +0200 |
Jan Mulder |
debug: add SPI error counter to compass calibration
div-fixes-5
|
Mon, 08 Apr 2019 12:02:07 +0200 |
Jan Mulder |
Comply to datasheet when resetting battery gauge registers
div-fixes-5
|
Mon, 08 Apr 2019 11:18:40 +0200 |
Jan Mulder |
cleanup: factor out I2C1_Status() and cleanup type
div-fixes-5
|
Mon, 08 Apr 2019 11:49:13 +0200 |
Jan Mulder |
Improvement SPI stability/recoverability
div-fixes-5
|
Mon, 08 Apr 2019 10:35:29 +0200 |
Jan Mulder |
cleanup: factor out dataSendToSlaveStopEval
div-fixes-5
|
Mon, 08 Apr 2019 10:16:17 +0200 |
Jan Mulder |
cleanup, bugfix: do not mask I2C_SystemStatus with local variable
div-fixes-5
|
Sat, 06 Apr 2019 20:35:21 +0200 |
Jan Mulder |
Bugfix: do not show NDL in bigscreen mode when zero
div-fixes-5
|
Sat, 06 Apr 2019 09:41:14 +0200 |
heinrichsweikamp |
Minor: translating some comments and variable names into english, some cleanup in tComm.c
|
Sat, 06 Apr 2019 09:11:39 +0200 |
heinrichsweikamp |
add update files for testing purposes
|
Sat, 06 Apr 2019 07:01:21 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/div-fixes-4-1 (pull request #14)
|
Fri, 05 Apr 2019 09:12:04 +0200 |
Jan Mulder |
cleanup, bugfix: do not exit simulator on 5h dive time
div-fixes-4-1
|
Wed, 03 Apr 2019 21:11:56 +0200 |
Jan Mulder |
Bugfix: make date/time setting work over reboots
div-fixes-4-1
|
Wed, 03 Apr 2019 14:33:12 +0200 |
Jan Mulder |
cleanup: do not re-implement a standard function
div-fixes-4-1
|
Wed, 03 Apr 2019 14:16:59 +0200 |
Jan Mulder |
cleanup: make return void when never used
div-fixes-4-1
|
Tue, 02 Apr 2019 15:11:42 +0200 |
Jan Mulder |
cleanup: fix recent extra compiler warnings
div-fixes-4-1
|
Tue, 02 Apr 2019 14:53:15 +0200 |
Jan Mulder |
Bugfix: set battery percentage correctly after RTE update
div-fixes-4-1
|
Tue, 02 Apr 2019 18:18:22 +0200 |
heinrichsweikamp |
add update files for testing purposes
|
Mon, 01 Apr 2019 19:19:04 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/div-fixes-3 (pull request #13)
|
Mon, 01 Apr 2019 15:50:41 +0200 |
Jan Mulder |
cleanup: random set of cleanups
div-fixes-3
|
Sun, 31 Mar 2019 19:35:51 +0200 |
Jan Mulder |
Bugfix, deco: fix 2 (small) problems with calculated ceiling
div-fixes-3
|
Sun, 31 Mar 2019 15:14:06 +0200 |
Jan Mulder |
Bugfix, minor: properly alternate VPM/Buhlmann in deco loop
div-fixes-3
|
Fri, 29 Mar 2019 14:00:43 +0100 |
Jan Mulder |
Bugfix: correct presentation error in tissues custom view
div-fixes-3
|
Mon, 01 Apr 2019 09:01:09 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Improve_IPC_Sync (pull request #12)
|
Sun, 31 Mar 2019 15:49:47 +0200 |
ideenmodellierer |
Added schedule point for functions executed once in a second
Improve_IPC_Sync
|
Sun, 31 Mar 2019 15:44:56 +0200 |
ideenmodellierer |
Resolved some minor warnings
Improve_IPC_Sync
|
Sun, 31 Mar 2019 15:44:12 +0200 |
ideenmodellierer |
Splitted 120 seconds UART timeout into chunks of 500ms
Improve_IPC_Sync
|
Sun, 31 Mar 2019 15:39:44 +0200 |
ideenmodellierer |
Moved display refresh and button action function from tim callback to main loop
Improve_IPC_Sync
|
Thu, 28 Mar 2019 13:05:29 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/edit-fix (pull request #11)
|
Thu, 28 Mar 2019 09:54:29 +0100 |
Jan Mulder |
Bugfix, trivial: correctly present avg depth in overview custom
edit-fix
|
Thu, 28 Mar 2019 08:26:17 +0100 |
Jan Mulder |
Bugfix: handle rounding of TTS and future TTS consistently
edit-fix
|
Wed, 27 Mar 2019 15:12:26 +0100 |
Jan Mulder |
Bugfix, trivial: do not visit 9 on first digit for setpoint
edit-fix
|
Tue, 26 Mar 2019 22:23:26 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/cv-persistent (pull request #10)
|
Tue, 26 Mar 2019 16:02:22 +0100 |
Jan Mulder |
New feature: do not show sensor customviews when no sensors attached
cv-persistent
|
Tue, 26 Mar 2019 13:00:15 +0100 |
Jan Mulder |
New feature: make selected customviews persistent
cv-persistent
|
Sun, 24 Mar 2019 22:09:37 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/ImprovmentSPI (pull request #9)
|
Sun, 24 Mar 2019 22:57:28 +0100 |
ideenmodellierer |
Update SPI error display and handling
ImprovmentSPI
|
Sun, 24 Mar 2019 22:53:17 +0100 |
ideenmodellierer |
Introduce scheduler function
ImprovmentSPI
|
Sun, 24 Mar 2019 22:51:15 +0100 |
ideenmodellierer |
Moved EvaluateButton into 100ms callback
ImprovmentSPI
|
Sun, 24 Mar 2019 22:48:49 +0100 |
ideenmodellierer |
Deleted duplicated header file (keep the one stored in common)
ImprovmentSPI
|
Sat, 23 Mar 2019 21:35:29 +0100 |
ideenmodellierer |
Starting 'ImprovmentSPI' branch
ImprovmentSPI
|
Sat, 23 Mar 2019 21:32:16 +0100 |
Ideenmodellierer |
merge fork
|
Sun, 17 Mar 2019 19:16:59 +0100 |
Thorsten |
Merged heinrichsweikamp/ostc4 into default
|
Sat, 16 Mar 2019 19:58:52 +0000 |
Thorsten |
Merged Cleanup_Compass_Wireless into default
|
Fri, 22 Mar 2019 08:15:30 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/div-fixes-cleaup-2 (pull request #8)
|
Fri, 22 Mar 2019 08:36:39 +0100 |
Jan Mulder |
Bugfix: fix initial CNS data in the logbook header
div-fixes-cleaup-2
|
Thu, 21 Mar 2019 15:28:47 +0100 |
Jan Mulder |
cleanup: another cleanup session (data_exchange_main.c)
div-fixes-cleaup-2
|
Thu, 21 Mar 2019 11:41:59 +0100 |
Jan Mulder |
cleanup: fix (harmless) use before assign
div-fixes-cleaup-2
|
Wed, 20 Mar 2019 16:24:10 +0100 |
Jan Mulder |
Bugfix, minor: color the overview customview correctly
div-fixes-cleaup-2
|
Tue, 19 Mar 2019 15:43:38 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/div-fixes-cleanup-1 (pull request #7)
|
Tue, 19 Mar 2019 11:42:00 +0100 |
Jan Mulder |
cleanup: more trivial cleanup (logbook.c/h)
div-fixes-cleanup-1
|
Sat, 16 Mar 2019 21:52:06 +0100 |
Jan Mulder |
Bugfix: show proper dive mode
div-fixes-cleanup-1
|
Sat, 16 Mar 2019 21:08:18 +0100 |
Jan Mulder |
cleanup: fix compiler warning
div-fixes-cleanup-1
|
Sat, 16 Mar 2019 21:02:10 +0100 |
Jan Mulder |
cleanup: remove unused include file t9.h
div-fixes-cleanup-1
|
Fri, 15 Mar 2019 15:48:53 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/avg-temp (pull request #6)
|
Fri, 15 Mar 2019 15:04:57 +0100 |
Jan Mulder |
Bugfix: average temperature on arrival from RTE instead of display time
avg-temp
|
Fri, 15 Mar 2019 12:55:58 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/cleanup-2 (pull request #5)
|
Fri, 15 Mar 2019 12:53:14 +0100 |
Jan Mulder |
cleanup: forgotten cleanup from 9da7dd50e2ec
cleanup-2
|
Fri, 15 Mar 2019 12:39:28 +0100 |
Jan Mulder |
cleanup: remove obsolete code, make static, etc.
cleanup-2
|
Fri, 15 Mar 2019 08:22:16 +0000 |
heinrichsweikamp |
Merged in Ideenmodellierer/ostc4/Cleanup_Compass_Wireless (pull request #4)
|
Thu, 14 Mar 2019 20:44:23 +0100 |
ideenmodellierer |
Cleanup compiler warnings
Cleanup_Compass_Wireless
|
Thu, 14 Mar 2019 20:44:03 +0100 |
ideenmodellierer |
Cleanup compiler warnings
Cleanup_Compass_Wireless
|
Thu, 14 Mar 2019 20:43:47 +0100 |
ideenmodellierer |
Resolve fixme comments
Cleanup_Compass_Wireless
|
Wed, 13 Mar 2019 21:51:25 +0100 |
ideenmodellierer |
Removed not suppoted wireless feature
Cleanup_Compass_Wireless
|
Wed, 13 Mar 2019 21:49:25 +0100 |
ideenmodellierer |
Removed not used compass code
Cleanup_Compass_Wireless
|
Wed, 13 Mar 2019 20:53:05 +0100 |
ideenmodellierer |
Starting 'Cleanup_Compass_Wireless' branch
Cleanup_Compass_Wireless
|
Wed, 13 Mar 2019 20:51:50 +0100 |
heinrichsweikamp |
Minor: Replace stupid "Sleep Sleep Sleep" message with something more meaningful
|
Tue, 12 Mar 2019 15:04:19 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/max-depth (pull request #3)
|
Mon, 11 Mar 2019 20:20:17 +0100 |
Jan Mulder |
cleanup: do not assign to same
max-depth
|
Mon, 11 Mar 2019 19:57:51 +0100 |
Jan Mulder |
cleanup: remove unused code
max-depth
|
Mon, 11 Mar 2019 19:54:20 +0100 |
Jan Mulder |
Bugfix: make max depth move with current depth (part 2)
max-depth
|
Mon, 11 Mar 2019 19:48:57 +0100 |
Jan Mulder |
Bugfix: make max depth move with current depth (part 1)
max-depth
|
Sun, 10 Mar 2019 20:30:42 +0100 |
heinrichsweikamp |
Minor: Button defaults, release date adjusted, use SPI_SHOW_SYNC_STATS
|
Sun, 10 Mar 2019 15:39:55 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/cleanup-1 (pull request #2)
|
Sun, 10 Mar 2019 10:46:48 +0100 |
Jan Mulder |
Fix accidentally pushed local code
cleanup-1
|
Sun, 10 Mar 2019 10:09:58 +0100 |
Jan Mulder |
Bugfix: highlight the menu underline correctly on selected state
cleanup-1
|
Fri, 08 Mar 2019 19:26:36 +0000 |
Jan Mulder |
Close branch linux-build.
linux-build
|
Fri, 08 Mar 2019 13:47:52 +0100 |
Jan Mulder |
cleanup: local data and functions can be static (tMenu)
cleanup-1
|
Thu, 07 Mar 2019 21:52:23 +0100 |
Jan Mulder |
cleanup: get rid of some compile warnings
cleanup-1
|
Fri, 08 Mar 2019 10:31:32 +0100 |
heinrichsweikamp |
Minor: Some documentation for new hardware
|
Thu, 07 Mar 2019 14:15:33 +0000 |
heinrichsweikamp |
Merged in janlmulder/ostc4/linux-build (pull request #1)
|
Thu, 21 Feb 2019 16:56:08 +0100 |
Jan Mulder |
Add Linux pack script
linux-build
|
Thu, 21 Feb 2019 10:29:26 +0100 |
Jan Mulder |
OSTC4pack_V4: do not hard code output filename for fonts
linux-build
|
Thu, 21 Feb 2019 10:01:36 +0100 |
Jan Mulder |
Add missing file for self build pack tools
linux-build
|
Thu, 07 Mar 2019 15:06:43 +0100 |
heinrichsweikamp |
Merge with FlipDisplay
|
Sun, 03 Mar 2019 21:13:31 +0100 |
Ideenmodellierer |
Fix for flipped display
FlipDisplay
|
Sun, 03 Mar 2019 21:12:06 +0100 |
Ideenmodellierer |
Bugfix button translation
FlipDisplay
|
Sun, 03 Mar 2019 19:20:18 +0100 |
Ideenmodellierer |
Binaries for beta testing
FlipDisplay
|
Sun, 03 Mar 2019 19:18:51 +0100 |
Ideenmodellierer |
Removed special indicator for DMA transfer error
FlipDisplay
|
Sun, 03 Mar 2019 17:46:50 +0100 |
Ideenmodellierer |
Do hard sync after communication timeout > 1 second
FlipDisplay
|
Sun, 03 Mar 2019 17:45:39 +0100 |
Ideenmodellierer |
Keep NSS low during SPI transfer only
FlipDisplay
|
Sun, 03 Mar 2019 12:19:47 +0100 |
Ideenmodellierer |
Added definitions for SPI sequence counter
FlipDisplay
|
Sun, 03 Mar 2019 12:18:44 +0100 |
Ideenmodellierer |
Moved button evaluation out of interrupt handler
FlipDisplay
|
Sun, 03 Mar 2019 12:16:54 +0100 |
Ideenmodellierer |
Bugfix ButtonResponsiveness
FlipDisplay
|
Sat, 02 Mar 2019 17:42:51 +0100 |
Ideenmodellierer |
Place CNS and pressure within the screen (avoid clipping)
FlipDisplay
|
Sat, 02 Mar 2019 17:42:06 +0100 |
Ideenmodellierer |
Eliminate warnings
FlipDisplay
|
Sat, 02 Mar 2019 17:01:06 +0100 |
Ideenmodellierer |
Use SPI TX callback to synchronize to main CPU
FlipDisplay
|
Sat, 02 Mar 2019 16:57:59 +0100 |
Ideenmodellierer |
Forward compass data during calibration mode
FlipDisplay
|
Sat, 02 Mar 2019 16:56:58 +0100 |
Ideenmodellierer |
RTE Version 1.7 needed because of protocoll and baud rate change
FlipDisplay
|
Thu, 28 Feb 2019 20:05:51 +0100 |
Ideenmodellierer |
Adjust voltage location
FlipDisplay
|
Thu, 28 Feb 2019 20:05:17 +0100 |
Ideenmodellierer |
Use one global structure for schedule data
FlipDisplay
|
Thu, 28 Feb 2019 19:38:36 +0100 |
Ideenmodellierer |
Introduced Token for SPI data exchange
FlipDisplay
|
Thu, 28 Feb 2019 19:34:08 +0100 |
Ideenmodellierer |
Use one global structure for all schedule counters
FlipDisplay
|
Thu, 28 Feb 2019 19:07:10 +0100 |
Ideenmodellierer |
Only use data if data frame is valid
FlipDisplay
|
Thu, 28 Feb 2019 19:03:29 +0100 |
Ideenmodellierer |
Increase prescalar => frame takes about 4ms.
FlipDisplay
|
Thu, 28 Feb 2019 19:02:34 +0100 |
Ideenmodellierer |
Get version from local memory instead from incoming data
FlipDisplay
|
Sat, 23 Feb 2019 21:10:51 +0100 |
Ideenmodellierer |
Removed no longer supported scooter code
FlipDisplay
|
Tue, 19 Feb 2019 21:48:32 +0100 |
Ideenmodellierer |
Only copy data if data connection to RTE is valid
FlipDisplay
|
Tue, 19 Feb 2019 18:20:45 +0100 |
Ideenmodellierer |
Introduces abort of communication in case of a out of sync DMA transfer
FlipDisplay
|
Tue, 19 Feb 2019 18:18:37 +0100 |
Ideenmodellierer |
Restore old data copy locations
FlipDisplay
|
Tue, 19 Feb 2019 18:16:59 +0100 |
Ideenmodellierer |
Removed cyclic (by timer) send on slave side
FlipDisplay
|
Tue, 19 Feb 2019 18:15:35 +0100 |
Ideenmodellierer |
Intoduced transfer abort function for data exchange recovery
FlipDisplay
|
Tue, 19 Feb 2019 18:13:18 +0100 |
Ideenmodellierer |
Add compile switch to disable optimization for specific function
FlipDisplay
|
Sun, 17 Feb 2019 21:29:38 +0100 |
Ideenmodellierer |
Update of configuration and projectfiles to support new library folder structure
FlipDisplay
|
Sun, 17 Feb 2019 21:22:13 +0100 |
Ideenmodellierer |
Minor changes to improved code quality and to eliminate warnings
FlipDisplay
|
Sun, 17 Feb 2019 21:14:09 +0100 |
Ideenmodellierer |
Added function to initialise structures with the actual ambient pressure
FlipDisplay
|
Sun, 17 Feb 2019 21:12:22 +0100 |
Ideenmodellierer |
Added current STM32 standandard libraries in version independend folder structure
FlipDisplay
|
Sun, 17 Feb 2019 21:07:35 +0100 |
Ideenmodellierer |
Drop old STM32 standard librarey files
FlipDisplay
|
Sun, 03 Feb 2019 10:04:27 +0100 |
heinrichsweikamp |
build files
kittz
|
Sun, 27 Jan 2019 22:21:01 +0100 |
Ideenmodellierer |
Change GPIO speed for SPI communication as recommended by STM32 Errata
FlipDisplay
|
Sun, 27 Jan 2019 22:17:16 +0100 |
Ideenmodellierer |
Change GPIO speed for SPI communication as recommended by STM32 Errata
FlipDisplay
|
Sun, 27 Jan 2019 22:01:07 +0100 |
Ideenmodellierer |
Added option to build FontPack as static libary which is linked to the Firmware project (to allow separate build settings)
FlipDisplay
|
Sun, 13 Jan 2019 18:59:53 +0100 |
Ideenmodellierer |
Take care for display orientation if deleting lines
FlipDisplay
|
Sun, 13 Jan 2019 18:58:23 +0100 |
Ideenmodellierer |
Use 32bit operations for buffer fills
FlipDisplay
|
Tue, 08 Jan 2019 22:31:17 +0100 |
Ideenmodellierer |
Cleanup warning and disable printf calls
FlipDisplay
|
Sun, 06 Jan 2019 22:33:26 +0100 |
Ideenmodellierer |
Cleanup writechar pointers
FlipDisplay
|
Sun, 06 Jan 2019 22:31:45 +0100 |
Ideenmodellierer |
Enlarge text limits to get string displayed completly
FlipDisplay
|
Sun, 06 Jan 2019 22:30:35 +0100 |
Ideenmodellierer |
Submenus may have 6 items
FlipDisplay
|
Sun, 06 Jan 2019 22:27:46 +0100 |
Ideenmodellierer |
Added small helper for runtime evaluation
FlipDisplay
|
Thu, 03 Jan 2019 19:59:36 +0100 |
Ideenmodellierer |
Merge with 68181cd61f2069d061621c2cd2a6afddb7486f5e
FlipDisplay
|
Thu, 03 Jan 2019 18:35:11 +0100 |
Ideenmodellierer |
Eliminate warnings
FlipDisplay
|
Tue, 01 Jan 2019 21:04:01 +0100 |
Ideenmodellierer |
Binaries of development snapshot
FlipDisplay
|
Tue, 01 Jan 2019 21:03:33 +0100 |
Ideenmodellierer |
Added new nvm parameter"FlipDisplay" indicating the screen orientation
FlipDisplay
|
Tue, 01 Jan 2019 21:03:10 +0100 |
Ideenmodellierer |
Added new nvm parameter"FlipDisplay" indicating the screen orientation
FlipDisplay
|
Tue, 01 Jan 2019 21:02:17 +0100 |
Ideenmodellierer |
Added option to handled mirrored display to existing functions
FlipDisplay
|
Tue, 01 Jan 2019 21:00:55 +0100 |
Ideenmodellierer |
Consider computer heading in case of a flipped display
FlipDisplay
|
Tue, 01 Jan 2019 21:00:13 +0100 |
Ideenmodellierer |
Flip key assigment if needed
FlipDisplay
|
Tue, 01 Jan 2019 20:59:36 +0100 |
Ideenmodellierer |
Next text ID for display flip
FlipDisplay
|
Tue, 01 Jan 2019 20:57:41 +0100 |
Ideenmodellierer |
Starting 'FlipDisplay' branch
FlipDisplay
|
Mon, 24 Dec 2018 16:19:09 +0300 |
Dmitry Romanov |
fix comments
kittz
|
Mon, 24 Dec 2018 16:15:02 +0300 |
Dmitry Romanov |
Tested and alive.
kittz
|
Wed, 28 Nov 2018 09:36:33 +0300 |
Dmitry Romanov |
Generalize TEXT of pressure unit
kittz
|
Tue, 27 Nov 2018 18:31:21 +0100 |
heinrichsweikamp |
hPa instead of mbar, enabled Spanish language
kittz
|
Tue, 27 Nov 2018 13:18:59 +0300 |
Dmitry Romanov |
globals
kittz
|
Tue, 27 Nov 2018 12:59:56 +0300 |
Dmitry Romanov |
Stable.fix.
kittz
|
Mon, 26 Nov 2018 15:25:52 +0300 |
Dmitry Romanov |
Config for debug data
kittz
|
Mon, 26 Nov 2018 13:58:51 +0300 |
Dmitry Romanov |
+2ms delay
kittz
|
Mon, 26 Nov 2018 13:49:02 +0300 |
Dmitry Romanov |
fix comments
kittz
|
Mon, 26 Nov 2018 13:45:14 +0300 |
Dmitry Romanov |
Sorry. Now.
kittz
|
Mon, 26 Nov 2018 13:42:38 +0300 |
Dmitry Romanov |
Debounce. Bounced buttons fixed.
kittz
|
Mon, 26 Nov 2018 12:20:31 +0300 |
Dmitry Romanov |
reduce i2c speed and dutycycle for compass stability
kittz
|
Mon, 26 Nov 2018 11:38:06 +0300 |
Dmitry Romanov |
a bit of
kittz
|
Mon, 26 Nov 2018 10:50:39 +0300 |
Dmitry Romanov |
Stable to test. button sensitiveness fix. + global_constants.
kittz
|
Mon, 26 Nov 2018 10:13:02 +0300 |
Dmitry Romanov |
First stable. With minimal button sensitivity fix(for broken buttons)
kittz
|
Fri, 23 Nov 2018 18:14:56 +0300 |
Dmitry Romanov |
+- stable
kittz
|
Fri, 23 Nov 2018 16:52:21 +0300 |
Dmitry Romanov |
temp! full cyclic SPI
kittz
|
Thu, 22 Nov 2018 12:02:55 +0300 |
Dmitry Romanov |
revert
kittz
|
Wed, 21 Nov 2018 13:57:58 +0300 |
Dmitry Romanov |
tmp
kittz
|
Wed, 21 Nov 2018 13:12:44 +0300 |
Dmitry Romanov |
fix time&date after wakeup
kittz
|
Wed, 21 Nov 2018 12:49:54 +0300 |
Dmitry Romanov |
increased interCPU baudrate, cpu2: i2c in SPI1 IRQ
kittz
|
Wed, 21 Nov 2018 10:25:15 +0300 |
Dmitry Romanov |
Remove unusable code!!! prepare data for SPI in ONLY 1 IRQ!!!!
kittz
|
Tue, 20 Nov 2018 12:27:40 +0300 |
Dmitry Romanov |
???????
kittz
|
Tue, 20 Nov 2018 12:08:19 +0300 |
Dmitry Romanov |
+i2c analog noise filtering
kittz
|
Tue, 20 Nov 2018 09:25:17 +0000 |
Dmitry Romanov |
Created new branch kittz
kittz
|
Sat, 06 Oct 2018 15:02:11 +0200 |
heinrichsweikamp |
Added Spanish language
|
Thu, 04 Oct 2018 20:49:47 +0200 |
Ideenmodellierer |
Added Fontpack reference project
|
Thu, 04 Oct 2018 20:45:12 +0200 |
Ideenmodellierer |
Added script to pack FontPack
|
Thu, 04 Oct 2018 20:44:19 +0200 |
Ideenmodellierer |
Starting Firmware 1.4 the fontpack version 1.0 is needed
|
Thu, 04 Oct 2018 20:42:56 +0200 |
Ideenmodellierer |
Update Fontpack code to support font moved to upper memory
|
Thu, 04 Oct 2018 20:41:21 +0200 |
Ideenmodellierer |
Update version info
|
Thu, 04 Oct 2018 20:40:53 +0200 |
Ideenmodellierer |
Move font to upper memory
|
Thu, 04 Oct 2018 20:40:21 +0200 |
Ideenmodellierer |
Add definitions for Fonts to be placed in upper flash
|
Tue, 11 Sep 2018 22:16:05 +0200 |
heinrichsweikamp |
Merge
|
Wed, 05 Sep 2018 10:41:48 +0200 |
heinrichsweikamp |
remove wiki files from repo
|
Tue, 11 Sep 2018 19:29:58 +0200 |
heinrichsweikamp |
old (and new) compass support
|
Thu, 30 Aug 2018 21:48:21 +0200 |
heinrichsweikamp |
1.3.8 forum release
|
Wed, 22 Aug 2018 18:54:01 +0200 |
Ideenmodellierer |
Update image size for 'F'ahrenheit
|
Wed, 22 Aug 2018 11:35:05 +0200 |
Ideenmodellierer |
Bugfix: FutureTTS and Fahrenheit not displayed correct
|
Wed, 15 Aug 2018 12:16:23 +0200 |
heinrichsweikamp |
language updates
|
Tue, 14 Aug 2018 13:53:43 +0200 |
heinrichsweikamp |
language updates
|
Tue, 14 Aug 2018 12:43:58 +0200 |
heinrichsweikamp |
typo in info menu...
|
Mon, 13 Aug 2018 19:11:14 +0200 |
Ideenmodellierer |
Replaced wait loop with delay fct
|
Sun, 12 Aug 2018 23:02:13 +0200 |
Ideenmodellierer |
Bugfix font elements (ue missing)
|
Sat, 11 Aug 2018 13:57:47 +0200 |
heinrichsweikamp |
rename update batch file
|
Fri, 10 Aug 2018 19:40:55 +0200 |
heinrichsweikamp |
more language updates
|
Fri, 10 Aug 2018 19:22:12 +0200 |
heinrichsweikamp |
language updates
|
Thu, 09 Aug 2018 22:39:15 +0200 |
Ideenmodellierer |
Added UTF8 decode function
|
Thu, 09 Aug 2018 22:38:56 +0200 |
Ideenmodellierer |
Resolve format warnings
|
Tue, 07 Aug 2018 17:03:36 +0200 |
heinrichsweikamp |
language updates
|
Tue, 07 Aug 2018 00:24:05 +0200 |
heinrichsweikamp |
Italian activated (needs some fine tuning), special characters (?,?,?,?,? and others) currently not working...
|
Sun, 05 Aug 2018 12:57:49 +0200 |
Ideenmodellierer |
Added missing ENTRY point
|
Sun, 05 Aug 2018 12:57:23 +0200 |
Ideenmodellierer |
Allow RTE binaries > 64k size
|
Sun, 05 Aug 2018 12:56:43 +0200 |
Ideenmodellierer |
Added reference projects
|
Tue, 31 Jul 2018 22:28:21 +0200 |
Ideenmodellierer |
Resolved warnings pointing to possible invalid memory access
|
Mon, 30 Jul 2018 11:37:39 +0200 |
heinrichsweikamp |
remove hgsub files
|
Mon, 30 Jul 2018 11:31:20 +0200 |
heinrichsweikamp |
add o4pack files
|
Sun, 29 Jul 2018 18:27:37 +0200 |
Ideenmodellierer |
Increased version number
|
Sun, 29 Jul 2018 18:16:01 +0200 |
Ideenmodellierer |
Added instruction to optimize for size
|
Sun, 29 Jul 2018 18:09:58 +0200 |
Ideenmodellierer |
Always include Fonts library (to have the adresses defined)
|
Sun, 29 Jul 2018 18:07:52 +0200 |
Ideenmodellierer |
Replaced generic with individual sections to invert the link order and to be able to place specific fonts at defined locations
|
Sun, 29 Jul 2018 18:06:37 +0200 |
Ideenmodellierer |
Placed directory sections in firmware memory space
|
Sun, 29 Jul 2018 18:05:44 +0200 |
Ideenmodellierer |
Split memory areas and reverse engineered font library
|
Sun, 29 Jul 2018 16:46:31 +0200 |
Ideenmodellierer |
Force reset in case of a hard fault
|
Sun, 29 Jul 2018 16:45:37 +0200 |
Ideenmodellierer |
Non functional change just to use same symbols as CPU1
|
Sun, 29 Jul 2018 16:45:00 +0200 |
Ideenmodellierer |
Aligned structure with CPU1 linker file
|
Sun, 29 Jul 2018 16:17:25 +0200 |
Ideenmodellierer |
Increase version number
|
Sat, 28 Apr 2018 11:52:34 +0200 |
heinrichsweikamp |
include in ostc4 repository
|
Sat, 28 Apr 2018 11:48:39 +0200 |
heinrichsweikamp |
init
|
Sat, 28 Apr 2018 11:33:57 +0200 |
heinrichsweikamp |
Update author name for release
|
Wed, 07 Mar 2018 18:56:48 +0100 |
jDG |
... more GPL License and general cleanups
|
Wed, 07 Mar 2018 17:35:35 +0100 |
jDG |
... OpenOCD scripts to dump firmwares (not working)
|
Tue, 27 Feb 2018 13:57:30 +0100 |
jDG |
... minor warnings
|
Sat, 10 Feb 2018 11:25:13 +0100 |
heinrichsweikamp |
change author name to heinrichs weikamp gmbh
|
Tue, 06 Feb 2018 16:13:30 +0100 |
jDG |
[ADD]Discovery/Src licences, plus reindentation
|
Tue, 23 Jan 2018 17:29:40 +0100 |
jDG |
ADD GPL License ...
|
Tue, 23 Jan 2018 13:36:25 +0100 |
jDG |
ADD script to set GPL headers
|
Wed, 10 Jan 2018 19:59:50 +0100 |
JeanDo |
... Fighting with internal oscillator.
|
Wed, 10 Jan 2018 11:22:33 +0100 |
JeanDo |
ADD C indentation standard
|
Tue, 09 Jan 2018 18:34:03 +0100 |
jDG |
... single step in Discovery code: trying to have an oscillator.
|
Wed, 03 Jan 2018 01:40:59 +0100 |
jdg |
FIX move bootloader SFirmwareData at fixed address 0x0800A000
|
Mon, 01 Jan 2018 20:12:34 +0100 |
JeanDo |
ADD font check code that runs at FontPack installation.
|
Mon, 01 Jan 2018 18:56:14 +0100 |
JeanDo |
ADD missing chars in FontPack
|
Mon, 01 Jan 2018 18:55:12 +0100 |
JeanDo |
FIX need to link actual FirmwareData too...
|
Mon, 01 Jan 2018 18:24:07 +0100 |
JeanDo |
FIX shared SFirmwareData signature at fixed address
|
Sat, 30 Dec 2017 20:24:04 +0100 |
jdg |
NEW shared font directory at 0x081E0000
|
Tue, 26 Dec 2017 19:31:13 +0100 |
jdg |
... more docs
|
Tue, 26 Dec 2017 18:26:12 +0100 |
jdg |
... typo in subrepo ?
|
Tue, 26 Dec 2017 18:24:03 +0100 |
jdg |
ADD wiki sub-repos
|
Tue, 26 Dec 2017 18:22:49 +0100 |
jdg |
... FontPack CPU1 project
|
Tue, 19 Dec 2017 23:42:13 +0100 |
JeanDo |
FIRST CPU2-RTE LINKING VERSION
|
Tue, 19 Dec 2017 18:47:04 +0100 |
JeanDo |
FIX move fonts to UPPER ROM SECTION (above 0x8100000)
|
Tue, 19 Dec 2017 18:45:03 +0100 |
JeanDo |
ADD CPU1 pin layout
|
Tue, 19 Dec 2017 13:45:03 +0100 |
jDG |
FIRST CPU1-DISCOVERY LINKING VERSION
|
Tue, 19 Dec 2017 11:19:35 +0100 |
jDG |
CLEANUP move driver code to Common/Drivers
|
Mon, 18 Dec 2017 18:16:28 +0100 |
JeanDo |
FIX text_multilanguage shall be compiled once
|
Mon, 18 Dec 2017 17:08:23 +0100 |
JeanDo |
FIX recover jeopardized fonts & images structure
|
Mon, 18 Dec 2017 14:30:14 +0100 |
jDG |
... move absolute data to named sections
|
Mon, 18 Dec 2017 14:03:55 +0100 |
jDG |
CLEAN retrieve original startup code. reset linker script.
|
Fri, 15 Dec 2017 02:06:18 +0100 |
JeanDo |
... more clean
|
Fri, 15 Dec 2017 01:45:20 +0100 |
JeanDo |
MOVE files for other applications
|
Wed, 13 Dec 2017 18:23:00 +0100 |
jDG |
... debugging Discovery project compilation.
|
Wed, 13 Dec 2017 13:30:13 +0100 |
jDG |
CLEANUP remove duplicated support sources
|
Wed, 13 Dec 2017 13:05:12 +0100 |
jDG |
CLEANUP make svn: subdirectories windows and macos compatibles
|
Tue, 12 Dec 2017 18:53:53 +0100 |
jDG |
Add chip documentations
|
Tue, 12 Dec 2017 17:36:20 +0100 |
jDG |
ADD sub repositories
|