Mercurial > public > ostc4

log

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
less more | rev 859: (0) -120 +120 tip
age author description
10 months ago Ideenmodellierer Improvment battery charger visualization: Evo_2_23
10 months ago Ideenmodellierer Bugfix initialisation of surface pressure: Evo_2_23
11 months ago Ideenmodellierer Developer feature debug warning: Evo_2_23
11 months ago Ideenmodellierer Do not show SP tab if PSCR mode is active: Evo_2_23
12 months ago Ideenmodellierer Redefine Deco gas creation function: Evo_2_23
12 months ago Ideenmodellierer Development bugfix menu id handling: Evo_2_23
12 months ago Ideenmodellierer Potential Bugfix Selection MenuEdit lifecycle: Evo_2_23
12 months ago Ideenmodellierer Bugfix Selection of custom views: Evo_2_23
12 months ago Ideenmodellierer Added line checks for System Menu: Evo_2_23
13 months ago Ideenmodellierer Check line enable/disable state when a new page is selected: Evo_2_23
13 months ago Ideenmodellierer Consider flipped screen for Predive menu: Evo_2_23
13 months ago Ideenmodellierer Bugfix tInfo_write_content_simple flip: Evo_2_23
13 months ago heinrichsweikamp Minor: Remove absolute paths from the reference project files
14 months ago Ideenmodellierer Consider pressure offset compensation in case of setting a default value: Evo_2_23
14 months ago Ideenmodellierer Added new PreDiveCheck info page: Evo_2_23
14 months ago Ideenmodellierer Added option to adjust pressure to diveO2 reference: Evo_2_23
14 months ago Ideenmodellierer Update version number and set beta state Evo_2_23
14 months ago Ideenmodellierer Migrated Sentinel protocol to new UART structure: Evo_2_23
14 months ago Ideenmodellierer Added autofocus for T3_DecoTTS view: Evo_2_23
14 months ago Ideenmodellierer Development bugfix CO2 LLC: Evo_2_23
14 months ago Ideenmodellierer Code cleanup: UART protocol definitions Evo_2_23
15 months ago Ideenmodellierer Added T3 autofocus for Gas list: Evo_2_23
15 months ago ideenmodellierer Bugfixes and code cleanup for BF views: Evo_2_23
15 months ago ideenmodellierer Bugfix BF temperatur display and cv switching: Evo_2_23
15 months ago Ideenmodellierer Added autofocus for BF Navigation view: Evo_2_23
15 months ago Ideenmodellierer Added event based display changes for big font view: Evo_2_23
15 months ago Ideenmodellierer Added selection if an active gas shall be used for deco calculation or not Evo_2_23
16 months ago Ideenmodellierer Added selection if an active gas shall be used for deco calculation or not Evo_2_23
16 months ago Ideenmodellierer Activated work gas for (p)scr mode: Evo_2_23
16 months ago Ideenmodellierer Added selection if an active gas shall be used for deco calculation or not: Evo_2_23
16 months ago Ideenmodellierer Changes wording from travel gas to work gas to use same wording as for other OSTCs Evo_2_23
17 months ago Ideenmodellierer Added CO2 display to T3 Bigfont view: Evo_2_23
17 months ago Ideenmodellierer Moved CO2 Menu from Xtra to Hardware: Evo_2_23
17 months ago Ideenmodellierer Bugfix Line order of info screen with flip screen active: Evo_2_23
17 months ago Ideenmodellierer Bugfix Flipscreen visualization:
17 months ago Ideenmodellierer Bugfix Flipscreen visualization: Evo_2_23
17 months ago Ideenmodellierer Starting 'Evo_2_23' branch Evo_2_23
17 months ago heinrichsweikamp User Test
18 months ago heinrichsweikamp 1.6.5 release
18 months ago Ideenmodellierer Split definition of custom views:
18 months ago Ideenmodellierer Added debug information in case an error in the settings has been detected:
18 months ago heinrichsweikamp 1.6.4 release
18 months ago heinrichsweikamp Testing build
18 months ago heinrichsweikamp Fix a bug that disables arbitrary menu lines in dive mode if lines are disabled / inactive in surface mode. (mikeller)
19 months ago Ideenmodellierer Bugfix CustomView selection during dive mode:
19 months ago Ideenmodellierer Dev Bugfix: O2 values of new detected sensors were shown as invalid:
19 months ago Ideenmodellierer Used real sensor state in simulation:
19 months ago heinrichsweikamp Testing build
19 months ago Ideenmodellierer Added function to skip lines which are not needed for operation:
19 months ago Ideenmodellierer Only jump to Sensor view during charging if sensors are connected:
19 months ago Ideenmodellierer DevBugfix CO2 sensor in streaming mode:
19 months ago heinrichsweikamp Testing build
19 months ago heinrichsweikamp Zusammenf?hren
19 months ago heinrichsweikamp Update Firmware version number
19 months ago heinrichsweikamp Adds a simple countdown timer, available as a custom view in surface and dive mode.
19 months ago Ideenmodellierer Cleanup initialisation code:
19 months ago Ideenmodellierer Cleanup initialisation / deinitialization:
19 months ago Ideenmodellierer Removed dependency to protocol setting:
19 months ago Ideenmodellierer Update RTE version number
20 months ago Ideenmodellierer Cleanup warnings
20 months ago Ideenmodellierer Added CO2 mirrow instance:
20 months ago Ideenmodellierer Migrated CO2 protocol implementation to new format:
20 months ago Ideenmodellierer Use mirror sensortype for visualization:
20 months ago Ideenmodellierer Expanded Sensor map structure:
20 months ago Ideenmodellierer Moved DiveO2 sensor specific funtionality into separated file:
20 months ago Ideenmodellierer Restructure UART based sensor handling:
20 months ago Ideenmodellierer Bugfix PSCR Settings in Simulator Mode:
20 months ago heinrichsweikamp Avoid a configuration warning after the firmware upgrade by disabling automatic setpoint switching. This makes sure the user's automatic setpoint configuration is not overwritten by the validity checks if the settings are not in the correct spots for the new configuration. Users will have to manually re-create the automatic setpoint switching configuration in the new format;
20 months ago heinrichsweikamp update current build for testing
20 months ago heinrichsweikamp Fix bug introduced in 04b98a2, causing the deco planner to not show deco stops.
20 months ago heinrichsweikamp When using automatic setpoint switching, allow the user to set an arbitrary ppO2 as a custom setpoint during the dive.
21 months ago heinrichsweikamp Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
22 months ago Ideenmodellierer Dev Bugfx Empty buffer indication and stability improvments:
22 months ago Ideenmodellierer Cleanup sensor data interface:
22 months ago heinrichsweikamp Change support from Pyroscience -> DiveO2 sensors
22 months ago Ideenmodellierer Bugfixloop UART multiplexer integration:
22 months ago Ideenmodellierer Update digital O2 sensor information:
22 months ago Ideenmodellierer Sensor status support for multiplexed DiveO2 sensors:
22 months ago Ideenmodellierer Update real multiplexer implementation:
22 months ago Ideenmodellierer Discovery<=>SmallCPU inferface update:
22 months ago Ideenmodellierer Added UART multiplexer support for DiveO2:
22 months ago heinrichsweikamp Zusammenf?hren
22 months ago heinrichsweikamp This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
22 months ago heinrichsweikamp Add support for a configurable compass declination in a range of -99 to 99 degrees.
23 months ago heinrichsweikamp Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
23 months ago heinrichsweikamp more menu items for the compass menu: Delete bearing, and reset to land based bearing. I have also re-enabled the real time bearing display in the menu - makes it easier to set the correct bearing. (mikeller)
23 months ago heinrichsweikamp Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
23 months ago izzni Fix character truncation when screen is flipped. This was causing the dive computer to lock up when in English Units with the screen flipped when the first decompression stop is shown using FONT_105.
23 months ago heinrichsweikamp Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
23 months ago heinrichsweikamp CCR overview in surface mode. Makes it easy to quickly check that all settings (mode, setpoints, diluent, scrubber timer) are correct when preparing to dive (also makes the OC gas list available in surface mode for the same reason).
23 months ago heinrichsweikamp Deactivation of the 'fallback' option when the CCR mode is set to 'Fixed' - this makes it a little clearer that the option has no influence in this mode.
23 months ago heinrichsweikamp 1.6.2 release
23 months ago heinrichsweikamp Update build for testing
23 months ago heinrichsweikamp change button default responsiveness to 100
23 months ago heinrichsweikamp After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
2023-03-27 heinrichsweikamp Update build for testing
2023-03-26 heinrichsweikamp increase HAL_Delay to 10ms for cold-start-button reset
2023-03-26 heinrichsweikamp Preparing a 1.6.2 release candidate
2023-03-21 heinrichsweikamp Fix/handle negative scrubber timer values
2023-03-21 heinrichsweikamp Quit simualted dives after the dive time set in the SIM tab.
2023-03-17 heinrichsweikamp Some compass improvements from mikeller
2023-03-15 heinrichsweikamp - Colours for scrubber display when time remaining falls below a threshold value
2023-03-07 Ideenmodellierer Dev Bugfix: ignore analog out of bounds limits for DiveO2 sensor:
2023-03-07 Ideenmodellierer Added visualization of CO2 during dive:
2023-03-07 Ideenmodellierer Cleanup display of multiple warnings in T3 (Big font) view:
2023-03-07 Ideenmodellierer Only show autodetection in sensor menu if external interface is present:
2023-03-07 Ideenmodellierer Updated outdated comment
2023-03-07 Ideenmodellierer Dev Bugfix: Alignment problem in lifedata structure:
2023-03-13 Ideenmodellierer resolv merge
2023-03-05 Ideenmodellierer Avoid blinking in customer view selection page:
2023-03-13 Ideenmodellierer Added enum for Co2 display
2023-03-05 Ideenmodellierer Added display of co2 ppm values:
2023-03-05 Ideenmodellierer Added pressure compensation to CO2 detection:
2023-02-21 Ideenmodellierer Code cleanup sensors under development:
2023-02-19 Ideenmodellierer Update Sentinel protocol:
2023-02-19 Ideenmodellierer Added DiveO2 fatal error detection:
2023-02-19 Ideenmodellierer Enable start dive in Big font display:
2023-02-19 Ideenmodellierer Update Sentinel protocol:
2023-02-02 Ideenmodellierer Added button lock after wakeup in surface mode:
2023-02-02 Ideenmodellierer Added button lock after wakeup in surface mode:
less more | rev 859: (0) -120 +120 tip