| Thu, 10 Aug 2023 21:24:04 +0200 |
Ideenmodellierer |
Update RTE version number
|
| Mon, 31 Jul 2023 20:00:06 +0200 |
Ideenmodellierer |
Expanded Sensor map structure:
|
| Sat, 05 Aug 2023 11:52:08 +0200 |
heinrichsweikamp |
Avoid a configuration warning after the firmware upgrade by disabling automatic setpoint switching. This makes sure the user's automatic setpoint configuration is not overwritten by the validity checks if the settings are not in the correct spots for the new configuration. Users will have to manually re-create the automatic setpoint switching configuration in the new format;
|
| Tue, 04 Jul 2023 14:39:06 +0200 |
heinrichsweikamp |
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
|
| Thu, 18 May 2023 09:49:17 +0200 |
heinrichsweikamp |
Add support for a configurable compass declination in a range of -99 to 99 degrees.
|
| Thu, 13 Apr 2023 09:35:43 +0200 |
heinrichsweikamp |
1.6.2 release
|
| Wed, 12 Apr 2023 09:24:44 +0200 |
heinrichsweikamp |
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
|
| Sun, 26 Mar 2023 11:27:29 +0200 |
heinrichsweikamp |
Preparing a 1.6.2 release candidate
|
| Tue, 21 Mar 2023 12:57:37 +0100 |
heinrichsweikamp |
Fix/handle negative scrubber timer values
|
| Wed, 15 Mar 2023 09:18:07 +0100 |
heinrichsweikamp |
- Colours for scrubber display when time remaining falls below a threshold value
|
| Thu, 02 Feb 2023 17:35:38 +0100 |
Ideenmodellierer |
Added button lock after wakeup in surface mode:
|
| Sun, 15 Jan 2023 21:48:34 +0100 |
Ideenmodellierer |
Optical sensor as default:
|
| Sat, 14 Jan 2023 20:41:36 +0100 |
Ideenmodellierer |
Added sensor map to Firmware <=> RTE inferface:
|
| Sun, 20 Nov 2022 20:42:33 +0100 |
Ideenmodellierer |
Increased version number and set beta label
|
| Tue, 08 Nov 2022 21:16:17 +0100 |
Ideenmodellierer |
Extension scrubber time:
|
| Fri, 19 Aug 2022 11:27:44 +0200 |
heinrichsweikamp |
1.6.0 release
Betatest
|
| Fri, 05 Aug 2022 15:10:10 +0200 |
Ideenmodellierer |
Increased version numbers:
Betatest
|
| Sat, 12 Mar 2022 14:57:54 +0100 |
heinrichsweikamp |
increase version numbers for upcomming release
Betatest
|
| Tue, 14 Dec 2021 15:36:10 +0100 |
heinrichs weikamp |
PSCR Mode
Betatest
|
| Mon, 26 Apr 2021 15:03:04 +0200 |
heinrichs weikamp |
Update release date
|
| Sun, 25 Apr 2021 20:41:19 +0200 |
Ideenmodellierer |
Introduced new menu tab for addition CCR options:
|
| Mon, 19 Apr 2021 20:34:53 +0200 |
Ideenmodellierer |
Allow setpoint starting at 0.4 ppO2:
|
| Mon, 19 Apr 2021 20:19:32 +0200 |
Ideenmodellierer |
Automatik setpoint change:
|
| Tue, 30 Mar 2021 10:34:12 +0200 |
heinrichs weikamp |
Compile with ENABLE_CHARGER_STATUS_V2
|
| Thu, 25 Feb 2021 12:20:43 +0100 |
heinrichsweikamp |
add build for testing, advance to FW1.5.7, RTE is unchanged since 1.5.6
|
| Fri, 05 Feb 2021 14:53:50 +0100 |
heinrichsweikamp |
Update RTE required value for release
|
| Fri, 05 Feb 2021 14:50:05 +0100 |
heinrichsweikamp |
1.5.6 release
v1.5.6 release
|
| Thu, 17 Dec 2020 09:52:12 +0100 |
heinrichsweikamp |
Update current build, "RTErequired" value and release date
|
| Tue, 24 Nov 2020 13:22:23 -0600 |
izzni |
-Add 12HR Time Support
|
| Sun, 15 Nov 2020 19:53:09 +0100 |
Ideenmodellierer |
Added O2 sensor source and calibration parameters to setting structure
|
| Sun, 08 Nov 2020 18:38:53 +0100 |
Ideenmodellierer |
Make sure motion detection settings are set to default values:
|
| Mon, 02 Nov 2020 21:15:42 +0100 |
Ideenmodellierer |
Added new settings for Viewport:
|
| Sat, 10 Oct 2020 21:02:05 +0200 |
Ideenmodellierer |
Added new t3 view showing first deco stop and tts in parallel:
|
| Sat, 10 Oct 2020 18:34:10 +0200 |
Ideenmodellierer |
Added default view selection and auto return to view to t3 visualization:
|
| Sat, 10 Oct 2020 16:59:18 +0200 |
Ideenmodellierer |
Added inertia simulation for compass heading:
|
| Fri, 25 Sep 2020 11:13:03 +0200 |
heinrichsweikamp |
increase version numbers, compile with TRUST_LOG_CONSISTENCY switch
1.5.5 release
|
| Thu, 10 Sep 2020 20:51:36 +0200 |
Ideenmodellierer |
Added compile switch for motion control:
|
| Sun, 30 Aug 2020 17:14:31 +0200 |
Ideenmodellierer |
Removed second big font profile
|
| Mon, 24 Aug 2020 19:30:15 +0200 |
Ideenmodellierer |
Added dew parameter to enable selection of customer BigFont screens to be displayed
|
| Thu, 20 Aug 2020 21:25:38 +0200 |
Ideenmodellierer |
Added compiler switch for existing debug view parameter
|
| Sat, 27 Jun 2020 18:40:32 +0200 |
heinrichsweikamp |
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
|
| Wed, 08 Apr 2020 16:34:54 +0200 |
heinrichsweikamp |
Power-down Bluetooth on COMM exit
|
| Sat, 29 Feb 2020 22:27:04 +0100 |
ideenmodellierer |
Introduced enum for lower left corner view selection:
minor_improvments
|
| Thu, 27 Feb 2020 09:13:08 +0100 |
heinrichsweikamp |
1.5.3 release
v1.5.3 release
|
| Tue, 18 Feb 2020 09:58:52 +0100 |
heinrichsweikamp |
make a 1.5.3 for tests
|
| Wed, 15 Jan 2020 13:41:01 +0100 |
heinrichsweikamp |
1.5.2 beta with RTE 2.02
v1.5.2.beta release
|
| Sun, 01 Dec 2019 17:28:35 +0100 |
Jan Mulder |
Fix case for case sensitive OS
maintain-1
|
| Thu, 10 Oct 2019 22:26:03 +0200 |
Ideenmodellierer |
merge default
MotionDetection
|
| Tue, 10 Sep 2019 20:51:55 +0200 |
ideenmodellierer |
Use Enum values for initialization and setting check:
MotionDetection
|
| Mon, 19 Aug 2019 17:50:55 +0200 |
Ideenmodellierer |
merged default into MotionDetection
MotionDetection
|
| Tue, 13 Aug 2019 21:10:46 +0200 |
ideenmodellierer |
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
MotionDetection
|
| Sun, 06 Oct 2019 14:07:51 +0200 |
heinrichsweikamp |
change max. allowed surface pressure to 1030hPa (As in the small OSTC)
|
| Sat, 17 Aug 2019 18:47:08 +0200 |
ideenmodellierer |
Set Max value for pressure offset to 50mBar (20mBar before)
PressureMeasure_Improvment
|
| Sun, 04 Aug 2019 11:01:06 +0200 |
heinrichsweikamp |
building a 1.5
v1.5.0 release
|
| Sun, 30 Jun 2019 22:12:15 +0200 |
heinrichsweikamp |
increase RTE to 1.9 and Firmware to 1.4.9 beta
|
| Wed, 19 Jun 2019 14:31:50 +0200 |
Jan Mulder |
bugfix: correct packed main version number in dive header
fix-version
|
| Mon, 06 May 2019 09:00:58 +0200 |
heinrichsweikamp |
Minor: Some Texts fixed, allign RTErequired* values with RTE firmware
|
| Sun, 28 Apr 2019 09:41:43 +0200 |
heinrichsweikamp |
add update files for testing purposes, bump to 1.4.8 beta / RTE 1.7.1 beta
|
| Mon, 15 Apr 2019 17:35:47 +0200 |
Jan Mulder |
feature: allow new saturation to be set in lower left corner
bm-3
|
| Tue, 26 Mar 2019 13:00:15 +0100 |
Jan Mulder |
New feature: make selected customviews persistent
cv-persistent
|
| Sun, 10 Mar 2019 20:30:42 +0100 |
heinrichsweikamp |
Minor: Button defaults, release date adjusted, use SPI_SHOW_SYNC_STATS
|
| Sun, 03 Mar 2019 12:16:54 +0100 |
Ideenmodellierer |
Bugfix ButtonResponsiveness
FlipDisplay
|
| Sat, 02 Mar 2019 16:56:58 +0100 |
Ideenmodellierer |
RTE Version 1.7 needed because of protocoll and baud rate change
FlipDisplay
|
| Sat, 23 Feb 2019 21:10:51 +0100 |
Ideenmodellierer |
Removed no longer supported scooter code
FlipDisplay
|
| Thu, 03 Jan 2019 19:59:36 +0100 |
Ideenmodellierer |
Merge with 68181cd61f2069d061621c2cd2a6afddb7486f5e
FlipDisplay
|
| Tue, 01 Jan 2019 21:03:10 +0100 |
Ideenmodellierer |
Added new nvm parameter"FlipDisplay" indicating the screen orientation
FlipDisplay
|
| Mon, 24 Dec 2018 16:15:02 +0300 |
Dmitry Romanov |
Tested and alive.
kittz
|
| Wed, 28 Nov 2018 09:36:33 +0300 |
Dmitry Romanov |
Generalize TEXT of pressure unit
kittz
|
| Tue, 27 Nov 2018 18:31:21 +0100 |
heinrichsweikamp |
hPa instead of mbar, enabled Spanish language
kittz
|
| Tue, 27 Nov 2018 12:59:56 +0300 |
Dmitry Romanov |
Stable.fix.
kittz
|
| Mon, 26 Nov 2018 13:58:51 +0300 |
Dmitry Romanov |
+2ms delay
kittz
|
| Mon, 26 Nov 2018 13:45:14 +0300 |
Dmitry Romanov |
Sorry. Now.
kittz
|
| Mon, 26 Nov 2018 13:42:38 +0300 |
Dmitry Romanov |
Debounce. Bounced buttons fixed.
kittz
|
| Mon, 26 Nov 2018 11:38:06 +0300 |
Dmitry Romanov |
a bit of
kittz
|
| Mon, 26 Nov 2018 10:50:39 +0300 |
Dmitry Romanov |
Stable to test. button sensitiveness fix. + global_constants.
kittz
|
| Mon, 26 Nov 2018 10:13:02 +0300 |
Dmitry Romanov |
First stable. With minimal button sensitivity fix(for broken buttons)
kittz
|
| Fri, 23 Nov 2018 16:52:21 +0300 |
Dmitry Romanov |
temp! full cyclic SPI
kittz
|
| Thu, 22 Nov 2018 12:02:55 +0300 |
Dmitry Romanov |
revert
kittz
|
| Wed, 21 Nov 2018 13:57:58 +0300 |
Dmitry Romanov |
tmp
kittz
|
| Wed, 21 Nov 2018 12:49:54 +0300 |
Dmitry Romanov |
increased interCPU baudrate, cpu2: i2c in SPI1 IRQ
kittz
|
| Wed, 21 Nov 2018 10:25:15 +0300 |
Dmitry Romanov |
Remove unusable code!!! prepare data for SPI in ONLY 1 IRQ!!!!
kittz
|
| Tue, 20 Nov 2018 12:08:19 +0300 |
Dmitry Romanov |
+i2c analog noise filtering
kittz
|
| Thu, 04 Oct 2018 20:41:21 +0200 |
Ideenmodellierer |
Update version info
|
| Tue, 11 Sep 2018 19:29:58 +0200 |
heinrichsweikamp |
old (and new) compass support
|
| Thu, 30 Aug 2018 21:48:21 +0200 |
heinrichsweikamp |
1.3.8 forum release
|
| Wed, 15 Aug 2018 12:16:23 +0200 |
heinrichsweikamp |
language updates
|
| Fri, 10 Aug 2018 19:40:55 +0200 |
heinrichsweikamp |
more language updates
|
| Tue, 07 Aug 2018 00:24:05 +0200 |
heinrichsweikamp |
Italian activated (needs some fine tuning), special characters (?,?,?,?,? and others) currently not working...
|
| Sun, 29 Jul 2018 18:27:37 +0200 |
Ideenmodellierer |
Increased version number
|
| Sat, 28 Apr 2018 11:52:34 +0200 |
heinrichsweikamp |
include in ostc4 repository
|
