Mercurial > public > ostc4
annotate Discovery/Src/logbook.c @ 592:f52bc70e380f
MotionCtrl - Sectorview Map sectors directly to custom views:
In previous version detection of sector changes lead to a button event which triggered the change of the shown custom view. As result the views shown were depending on the angle which is present while entering focus state. The new implementation maps the primary view to the center sector and assigns the other enabled views around the center => views will always appear at the same angle value.
| author | Ideenmodellierer |
|---|---|
| date | Sun, 03 Jan 2021 14:43:16 +0100 |
| parents | b33a8c1c72e5 |
| children | ae7f8333c900 |
| rev | line source |
|---|---|
| 38 | 1 /** |
| 2 ****************************************************************************** | |
| 3 * @copyright heinrichs weikamp | |
| 4 * @file logbook.c | |
| 5 * @author heinrichs weikamp gmbh and heinrichs weikamp gmbh | |
| 6 * @date 22-Apr-2014 | |
| 7 * @version V0.0.3 | |
| 8 * @since 03-Feb-2016 | |
| 9 * @brief Everything about creating and evaluating the logbook | |
| 10 * without the flash part which is included in externLogbookFlash.c | |
| 11 * and the USB/Bluetooth part in tComm.c | |
| 12 * CHANGE V0.0.3 hw: ppO2 sensor values | |
| 13 * CHANGE V0.0.4 hw: fix event bytes according to hwos_interface.odt dated 160610 in bitbucket hwOS | |
| 14 * @bug | |
| 15 * @warning | |
| 16 @verbatim | |
| 17 ============================================================================== | |
| 18 ##### Header ##### | |
| 19 ============================================================================== | |
| 20 [..] SLogbookHeader | |
| 21 The order has changed in comparsion to OSTC3 for perfect alignment | |
| 22 with 16bit and 32bit. The header is 256kB as well. | |
| 23 DO NOT rearrange anything but add new data to a second page | |
| 24 beyond diveHeaderEnd. Use extraPagesWithData to indicate that there is | |
| 25 data available that was not available in the OSTC3 256KB | |
| 26 This data will be behind the diveHeaderEnd. DO NOT delete diveHeaderEnd. | |
| 27 | |
| 28 [..] SLogbookHeaderOSTC3 | |
| 29 is the format used by the OSTC3. | |
| 30 logbook_getHeaderOSTC3() does the job using the global headers in logbook.c | |
| 31 | |
| 32 [..] SSmallHeader | |
| 33 - is the format used by the OSTC3 | |
| 34 | |
| 35 [..] Summary | |
| 36 The header format is not perfect and might be optimized prior to | |
| 37 releasing the diving computer. For now it is good to be compatible | |
| 38 with PC software available for checking the content of the logbook | |
| 39 | |
| 40 | |
| 41 @endverbatim | |
| 42 ****************************************************************************** | |
| 43 * @attention | |
| 44 * | |
| 45 * <h2><center>© COPYRIGHT(c) 2014 heinrichs weikamp</center></h2> | |
| 46 * | |
| 47 ****************************************************************************** | |
| 48 */ | |
| 49 | |
| 50 /* Includes ------------------------------------------------------------------*/ | |
| 51 #include <stdint.h> | |
| 52 #include <string.h> | |
| 53 #include "logbook.h" | |
| 54 //#include "test_vpm.h" | |
| 55 #include "externLogbookFlash.h" | |
| 56 #include "data_exchange.h" | |
| 57 #include "decom.h" | |
| 58 #include "tHome.h" // for tHome_findNextStop() | |
| 445 | 59 #include "settings.h" |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
60 #include "configuration.h" |
| 38 | 61 |
| 62 /* Private types -------------------------------------------------------------*/ | |
| 63 | |
| 64 #define LOGBOOK_VERSION (0x30) | |
| 65 #define LOGBOOK_VERSION_OSTC3 (0x24) | |
| 66 | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
67 #define DEFAULT_SAMPLES (100) /* Number of sample data bytes in case of an broken header information */ |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
68 #define DUMMY_SAMPLES (1000) /* Maximum number of samples profided by a dummy dive profile */ |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
69 |
| 38 | 70 typedef struct /* don't forget to adjust void clear_divisor(void) */ |
| 71 { | |
| 72 uint8_t temperature; | |
| 73 uint8_t deco_ndl; | |
| 74 uint8_t gradientFactor; | |
| 75 uint8_t ppo2; | |
| 76 uint8_t decoplan; | |
| 77 uint8_t cns; | |
| 78 uint8_t tank; | |
| 79 } SDivisor; | |
| 80 | |
| 81 /* Exported variables --------------------------------------------------------*/ | |
| 82 | |
| 83 /* Private variables ---------------------------------------------------------*/ | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
84 static SLogbookHeader gheader; |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
85 static SLogbookHeaderOSTC3 headerOSTC3; |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
86 static SLogbookHeaderOSTC3compact headerOSTC3compact; |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
87 static SSmallHeader smallHeader; |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
88 static SDivisor divisor; |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
89 static SDivisor divisorBackup; |
| 38 | 90 |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
91 static SSmallHeader smallDummyHeader; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
92 static uint16_t dummyWriteIdx; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
93 static uint16_t dummyReadIdx; |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
94 static uint8_t dummyMemoryBuffer[5000]; |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
95 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
96 |
| 38 | 97 /* Private function prototypes -----------------------------------------------*/ |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
98 static void clear_divisor(void); |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
99 static void logbook_SetAverageDepth(float average_depth_meter); |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
100 static void logbook_SetMinTemperature(float min_temperature_celsius); |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
101 static void logbook_SetMaxCNS(float max_cns_percentage); |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
102 static void logbook_SetCompartmentDesaturation(const SDiveState * pStateReal); |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
103 static void logbook_SetLastStop(float last_stop_depth_bar); |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
104 static void logbook_writedata(void * data, int length_byte); |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
105 static void logbook_UpdateHeader(const SDiveState * pStateReal); |
| 458 | 106 static void logbook_createDummyProfile(SLogbookHeader* pHeader, uint16_t length, uint16_t* depth, int16_t* temperature, uint16_t* ppo2); |
| 38 | 107 |
| 108 /* Exported functions --------------------------------------------------------*/ | |
| 109 | |
| 110 void logbook_EndDive(void) | |
| 111 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
112 ext_flash_close_new_dive_log((uint8_t*) &gheader); |
| 38 | 113 } |
| 114 | |
| 115 | |
| 116 // =============================================================================== | |
| 117 // logbook_last_totalDiveCount | |
| 118 /// @brief Fix setting issues | |
| 119 /// @date 04-April-2016 | |
| 120 /// | |
| 121 /// @return diveNumber (totalDiveCounter) of latest log entry, 0 if not a valid header | |
| 122 // =============================================================================== | |
| 123 uint16_t logbook_lastDive_diveNumber(void) | |
| 124 { | |
| 125 SLogbookHeader tempLogbookHeader; | |
| 126 if(logbook_getHeader(0, &tempLogbookHeader)) | |
| 127 { | |
| 128 return tempLogbookHeader.diveNumber; | |
| 129 } | |
| 130 else | |
| 131 { | |
| 132 return 0; | |
| 133 } | |
| 134 } | |
| 135 | |
| 136 | |
| 137 /** | |
| 138 ****************************************************************************** | |
| 139 * @brief logbook_getCurrentHeader. / | |
| 281 | 140 * @author heinrichs weikamp |
| 38 | 141 * @version V0.0.1 |
| 142 * @date 22-April-2014 | |
| 143 ****************************************************************************** | |
| 144 * | |
| 145 * @return SLogbookHeader*: | |
| 146 */ | |
| 147 SLogbookHeader* logbook_getCurrentHeader(void) | |
| 148 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
149 return &gheader; |
| 38 | 150 } |
| 151 | |
| 152 /** | |
| 153 ****************************************************************************** | |
| 154 * @brief logbook_getNumberOfHeaders. / | |
| 155 * @author heinrichs weikamp gmbh | |
| 156 * @version V0.0.1 | |
| 157 * @date 18-May-2016 | |
| 158 ****************************************************************************** | |
| 159 * | |
| 160 * @return uint8_t : number of valid headers (0xFAFA) found. | |
| 161 */ | |
| 162 uint8_t logbook_getNumberOfHeaders(void) | |
| 163 { | |
| 164 return ext_flash_count_dive_headers(); | |
| 165 } | |
| 166 | |
| 167 | |
| 168 /** | |
| 169 ****************************************************************************** | |
| 170 * @brief logbook_getHeader. / | |
| 281 | 171 * @author heinrichs weikamp |
| 38 | 172 * @version V0.0.1 |
| 173 * @date 22-April-2014 | |
| 174 ****************************************************************************** | |
| 175 * | |
| 176 * @param StepBackwards : 0 Last lokbook entry, 1 second to last entry, etc. | |
| 177 * @param SSLogbookHeader* pLogbookHeader: Output found LogbookHeader | |
| 178 * @return uint8_t : 1 = success | |
| 179 */ | |
| 180 uint8_t logbook_getHeader(uint8_t StepBackwards,SLogbookHeader* pLogbookHeader) | |
| 181 { | |
| 182 ext_flash_read_dive_header((uint8_t *)pLogbookHeader, StepBackwards); | |
| 183 if(pLogbookHeader->diveHeaderStart != 0xFAFA) | |
| 184 return 0; | |
| 185 else | |
| 186 return 1; | |
| 187 } | |
| 188 | |
| 189 /** | |
| 190 ****************************************************************************** | |
| 191 * @brief logbook_initNewdiveProfile. / | |
| 192 * creates header and smallHeader from diveState and global Settings | |
| 193 * and writes new lookboock entry on flash device | |
| 194 * diveState | |
| 281 | 195 * @author heinrichs weikamp |
| 38 | 196 * @version V0.0.1 |
| 197 * @date 22-April-2014 | |
| 198 ****************************************************************************** | |
| 199 * | |
| 200 * @param SDiveState* pInfo: Input | |
| 201 * @param SSettings* pSettings: Input | |
| 202 */ | |
| 203 | |
| 204 void logbook_initNewdiveProfile(const SDiveState* pInfo, SSettings* pSettings) | |
| 205 { | |
| 206 RTC_DateTypeDef Sdate; | |
| 207 RTC_TimeTypeDef Stime; | |
| 208 | |
| 209 for(int i = 0; i < sizeof(SLogbookHeader); i++) | |
| 210 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
211 ((uint8_t*)(&gheader))[i] = 0; |
| 38 | 212 } |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
213 gheader.diveHeaderStart = 0xFAFA; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
214 gheader.diveHeaderEnd = 0xFBFB; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
215 gheader.samplingRate = 2; |
| 38 | 216 if(pInfo->diveSettings.diveMode == DIVEMODE_OC) |
| 217 { | |
| 218 for(int i = 0; i < 5; i++) | |
| 219 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
220 gheader.gasordil[i].oxygen_percentage = pSettings->gas[i+1].oxygen_percentage; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
221 gheader.gasordil[i].helium_percentage = pSettings->gas[i+1].helium_percentage; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
222 gheader.gasordil[i].note.uw = pSettings->gas[i+1].note.uw; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
223 gheader.gasordil[i].depth_meter = pSettings->gas[i+1].depth_meter; |
| 38 | 224 } |
| 225 } | |
| 226 else | |
| 227 { | |
| 228 for(int i = 0; i < 5; i++) | |
| 229 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
230 gheader.gasordil[i].oxygen_percentage = pSettings->gas[i+6].oxygen_percentage; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
231 gheader.gasordil[i].helium_percentage = pSettings->gas[i+6].helium_percentage; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
232 gheader.gasordil[i].note.uw = pSettings->gas[i+6].note.uw; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
233 gheader.gasordil[i].depth_meter = pSettings->gas[i+6].depth_meter; |
| 38 | 234 } |
| 235 | |
| 236 for(int i = 0; i < 5; i++) | |
| 237 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
238 gheader.setpoint[i].setpoint_cbar = pSettings->setpoint[i+1].setpoint_cbar; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
239 gheader.setpoint[i].depth_meter = pSettings->setpoint[i+1].depth_meter; |
| 38 | 240 } |
| 241 } | |
| 242 // header.gasordil[pInfo->lifeData.actualGas.GasIdInSettings].depth_meter = 0; | |
| 243 | |
| 244 translateDate(pInfo->lifeData.dateBinaryFormat, &Sdate); | |
| 245 translateTime(pInfo->lifeData.timeBinaryFormat, &Stime); | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
246 gheader.dateYear = Sdate.Year; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
247 gheader.dateMonth = Sdate.Month; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
248 gheader.dateDay = Sdate.Date; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
249 gheader.timeHour = Stime.Hours; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
250 gheader.timeMinute = Stime.Minutes; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
251 gheader.cnsAtBeginning = (uint16_t)pInfo->lifeData.cns; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
252 gheader.surfacePressure_mbar = (uint16_t)(pInfo->lifeData.pressure_surface_bar * 1000); |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
253 gheader.firmwareVersionHigh = firmwareVersion_16bit_high(); |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
254 gheader.firmwareVersionLow = firmwareVersion_16bit_low(); |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
255 gheader.logbookProfileVersion = LOGBOOK_VERSION; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
256 gheader.salinity = pSettings->salinity; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
257 gheader.diveNumber = pSettings->totalDiveCounter; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
258 gheader.personalDiveCount = pSettings->personalDiveCount; |
| 38 | 259 |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
260 gheader.diveMode = pInfo->diveSettings.diveMode; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
261 gheader.CCRmode = pInfo->diveSettings.CCR_Mode; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
262 gheader.lastDecostop_m = pSettings->last_stop_depth_meter; |
| 38 | 263 |
| 264 if(pInfo->diveSettings.deco_type.ub.standard == GF_MODE) | |
| 265 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
266 gheader.decoModel = 1; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
267 gheader.gfLow_or_Vpm_conservatism = pInfo->diveSettings.gf_low; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
268 gheader.gfHigh = pInfo->diveSettings.gf_high; |
| 38 | 269 } |
| 270 else | |
| 271 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
272 gheader.decoModel = 2; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
273 gheader.gfLow_or_Vpm_conservatism = pInfo->diveSettings.vpm_conservatism; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
274 gheader.gfHigh = 0; |
| 38 | 275 } |
| 276 | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
277 memcpy(gheader.n2Compartments, pInfo->lifeData.tissue_nitrogen_bar, 64); |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
278 memcpy(gheader.heCompartments, pInfo->lifeData.tissue_helium_bar, 64); |
| 38 | 279 |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
280 logbook_SetCompartmentDesaturation(pInfo); |
| 38 | 281 |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
282 ext_flash_start_new_dive_log_and_set_actualPointerSample((uint8_t*)&gheader); |
| 38 | 283 |
| 284 smallHeader.profileLength[0] = 0xFF; | |
| 285 smallHeader.profileLength[1] = 0xFF; | |
| 286 smallHeader.profileLength[2] = 0xFF; | |
| 287 smallHeader.samplingRate_seconds = 2; | |
| 288 smallHeader.numDivisors = 7; | |
| 289 | |
| 290 smallHeader.tempType = 0; | |
| 291 smallHeader.tempLength = 2; | |
| 292 smallHeader.tempDivisor = 6; | |
| 293 | |
| 294 smallHeader.deco_ndlType = 1; | |
| 295 smallHeader.deco_ndlLength = 2; | |
| 296 smallHeader.deco_ndlDivisor = 6; //= 6; | |
| 297 | |
| 298 /* GF in % at actual position */ | |
| 299 smallHeader.gfType = 2; | |
| 300 smallHeader.gfLength = 1; | |
| 301 smallHeader.gfDivisor = 0; //12; | |
| 302 | |
| 303 /* 3 Sensors: 8bit ppO2 in 0.01bar, 16bit voltage in 0,1mV */ | |
| 304 smallHeader.ppo2Type = 3; | |
| 305 smallHeader.ppo2Length = 9; | |
| 306 smallHeader.ppo2Divisor = 2; //2 | |
| 307 | |
| 308 /* last 15 stops in minutes (last, second_to_last, ... */ | |
| 309 /* last stop depth is defined in header */ | |
| 310 smallHeader.decoplanType = 4; | |
| 311 smallHeader.decoplanLength = 15; | |
| 312 smallHeader.decoplanDivisor = 12;//12; | |
| 313 | |
| 314 smallHeader.cnsType = 5; | |
| 315 smallHeader.cnsLength = 2; | |
| 316 smallHeader.cnsDivisor = 12; | |
| 317 | |
| 318 smallHeader.tankType = 6; | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
319 #ifdef ENABLE_BOTTLE_SENSOR |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
320 smallHeader.tankLength = 2; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
321 smallHeader.tankDivisor = 30; /* log tank data once a minute */ |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
322 #else |
| 38 | 323 smallHeader.tankLength = 0; |
| 324 smallHeader.tankDivisor = 0; | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
325 #endif |
| 38 | 326 logbook_writedata((void *) &smallHeader,sizeof(smallHeader)); |
| 327 | |
| 328 clear_divisor(); | |
| 329 } | |
| 330 | |
| 331 /** | |
| 332 ****************************************************************************** | |
| 333 * @brief clear_divisor / clears divisor struct | |
| 281 | 334 * @author heinrichs weikamp |
| 38 | 335 * @version V0.0.1 |
| 336 * @date 22-April-2014 | |
| 337 ****************************************************************************** | |
| 338 * | |
| 339 */ | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
340 static void clear_divisor(void) |
| 38 | 341 { |
| 342 divisor.cns = smallHeader.cnsDivisor - 1; | |
| 343 divisor.decoplan = smallHeader.decoplanDivisor - 1; | |
| 344 divisor.deco_ndl = smallHeader.deco_ndlDivisor - 1; | |
| 345 divisor.gradientFactor = smallHeader.gfDivisor -1 ; | |
| 346 divisor.ppo2 = smallHeader.ppo2Divisor - 1; | |
| 347 divisor.tank = smallHeader.tankDivisor - 1; | |
| 348 divisor.temperature = smallHeader.tempDivisor - 1; | |
| 349 } | |
| 350 | |
| 351 | |
| 352 /** | |
| 353 ****************************************************************************** | |
| 354 * @brief add16. / adds 16 bit variable to 8 bit array | |
| 281 | 355 * @author heinrichs weikamp |
| 38 | 356 * @version V0.0.1 |
| 357 * @date 22-April-2014 | |
| 358 ****************************************************************************** | |
| 359 * | |
| 360 * @param uint8_t *pos: Output 8 bit array | |
| 361 * @param uint16_t var: 16 bit variable | |
| 362 */ | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
363 static void addU16(uint8_t *pos, uint16_t var) |
| 38 | 364 { |
| 365 *((uint16_t*)pos) = var; | |
| 366 } | |
| 367 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
368 static void addS16(uint8_t *pos, int16_t var) |
| 38 | 369 { |
| 370 *((int16_t*)pos) = var; | |
| 371 } | |
| 372 | |
| 373 /** | |
| 374 ****************************************************************************** | |
| 375 * @brief logbook_writeSample. / Writes one logbook sampl | |
| 281 | 376 * @author heinrichs weikamp |
| 38 | 377 * @date 22-April-2014 |
| 378 * @version V0.0.2 | |
| 379 * @since 20-June-2016 | |
| 380 * @bug Deco/NDL Status fixed in V0.0.2 | |
| 381 | |
| 382 | |
| 383 ****************************************************************************** | |
| 384 * | |
| 385 * @param SDiveState state: | |
| 386 */ | |
| 387 | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
388 void logbook_writeSample(const SDiveState *state) |
| 38 | 389 { |
| 390 uint8_t sample[256]; | |
| 391 // int position = 0; | |
| 392 int length = 0; | |
| 393 // _Bool bEvent = 0; | |
| 394 uint8_t nextstopDepthMeter = 0; | |
| 395 uint16_t nextstopLengthSeconds = 0; | |
| 396 uint8_t nextstopLengthMinutes = 0; | |
| 397 bit8_Type eventByte1, eventByte2; | |
| 398 bit8_Type profileByteFlag; | |
| 399 int i = 0; | |
| 400 for(i = 0; i <256 ;i++) | |
| 401 sample[i] = 0; | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
402 addU16(sample, (uint16_t)(state->lifeData.depth_meter * 100)); |
| 38 | 403 length += 2; |
| 404 sample[2] = 0; | |
| 405 length++; | |
| 406 eventByte1.uw = 0; | |
| 407 eventByte2.uw = 0; | |
| 408 //uint16_t tmpU16 = 0; | |
|
130
b7689d9e888a
Minor changes to improved code quality and to eliminate warnings
Ideenmodellierer
parents:
38
diff
changeset
|
409 const SDecoinfo * pDecoinfo; // new hw 160620 |
| 38 | 410 |
| 411 //BuildEevntyte 1 | |
| 412 // sub old 0-3 only one at a time | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
413 if(state->events.manualMarker) |
| 38 | 414 { |
| 415 eventByte1.uw = 6; | |
| 416 } | |
| 417 else | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
418 if(state->warnings.decoMissed) |
| 38 | 419 { |
| 420 eventByte1.uw = 2; | |
| 421 } | |
| 422 else | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
423 if(state->warnings.ppO2Low) |
| 38 | 424 { |
| 425 eventByte1.uw = 4; | |
| 426 } | |
| 427 else | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
428 if(state->warnings.ppO2High) |
| 38 | 429 { |
| 430 eventByte1.uw = 5; | |
| 431 } | |
| 432 else | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
433 if(state->warnings.lowBattery) |
| 38 | 434 { |
| 435 eventByte1.uw = 7; | |
| 436 } | |
| 437 else | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
438 if(state->warnings.slowWarning) |
| 38 | 439 { |
| 440 eventByte1.uw = 1; | |
| 441 } | |
| 442 // sub bit 4 to 7 | |
| 281 | 443 if(state->events.manualGasSet) |
| 38 | 444 { |
| 445 eventByte1.ub.bit4 = 1; | |
| 446 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
447 if(state->events.gasChange) |
| 38 | 448 { |
| 449 eventByte1.ub.bit5 = 1; | |
| 450 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
451 if(state->events.setpointChange) |
| 38 | 452 { |
| 453 eventByte1.ub.bit6 = 1; | |
| 454 } | |
| 455 // sub bit 7 + eventbyte2 | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
456 if(state->events.bailout) |
| 38 | 457 { |
| 458 eventByte1.ub.bit7 = 1; | |
| 459 eventByte2.ub.bit0 = 1; | |
| 460 } | |
| 461 //Add EventByte 1 | |
| 462 if(eventByte1.uw > 0) | |
| 463 { | |
| 464 sample[length] = eventByte1.uw; | |
| 465 length++; | |
| 466 } | |
| 467 if(eventByte2.uw > 0) | |
| 468 { | |
| 469 sample[length] = eventByte2.uw; | |
| 470 length++; | |
| 471 } | |
| 472 //Add EventInfos | |
| 281 | 473 if(state->events.manualGasSet) |
| 38 | 474 { |
| 475 //manual gas in %O2 & %He | |
| 281 | 476 sample[length] = state->events.info_manualGasSetO2; |
| 38 | 477 length += 1; |
| 281 | 478 sample[length] = state->events.info_manualGasSetHe; |
| 38 | 479 length += 1; |
| 480 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
481 if(state->events.gasChange) |
| 38 | 482 { |
| 483 //Current gas (gasid) | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
484 sample[length] = state->events.info_GasChange; |
| 38 | 485 length += 1; |
| 486 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
487 if(state->events.setpointChange) |
| 38 | 488 { |
| 489 //New setpoint in cbar | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
490 sample[length] = state->events.info_SetpointChange; |
| 38 | 491 length += 1; |
| 492 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
493 if(state->events.bailout) |
| 38 | 494 { |
| 495 //bailout gas in % O2 & %He | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
496 sample[length] = state->events.info_bailoutO2; |
| 38 | 497 length += 1; |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
498 sample[length] = state->events.info_bailoutHe; |
| 38 | 499 length += 1; |
| 500 } | |
| 501 | |
| 502 | |
| 503 if(divisor.temperature == 0) | |
| 504 { | |
| 505 divisor.temperature = smallHeader.tempDivisor - 1; | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
506 addS16(&sample[length], (int16_t)((state->lifeData.temperature_celsius * 10.0f) + 0.5f)); |
| 38 | 507 length += 2; |
| 508 } | |
| 509 else | |
| 510 { | |
| 511 divisor.temperature--; | |
| 512 } | |
| 513 | |
| 514 | |
| 515 if(smallHeader.deco_ndlDivisor > 0) | |
| 516 { | |
| 517 if(divisor.deco_ndl == 0) | |
| 518 { | |
| 519 divisor.deco_ndl = smallHeader.deco_ndlDivisor - 1; | |
| 520 | |
| 521 if(stateUsed->diveSettings.deco_type.ub.standard == GF_MODE) | |
| 522 pDecoinfo = &stateUsed->decolistBuehlmann; | |
| 523 else if(stateUsed->diveSettings.deco_type.ub.standard == VPM_MODE) | |
| 524 pDecoinfo = &stateUsed->decolistVPM; | |
| 525 else // should not happen as only GF and VPM at the moment | |
| 526 { | |
| 527 sample[length] = 0; | |
| 528 length += 1; | |
| 529 sample[length] = 0; | |
| 530 length += 1; | |
| 458 | 531 pDecoinfo = &stateUsed->decolistBuehlmann; /* use GF per default if something went wrong */ |
| 38 | 532 } |
| 533 | |
| 534 if(pDecoinfo->output_ndl_seconds > 0) | |
| 535 { | |
| 536 sample[length] = 0; | |
| 537 length += 1; | |
|
283
04cdeff80254
Bugfix: write NDL in logbook correctly
Jan Mulder <jlmulder@xs4all.nl>
parents:
281
diff
changeset
|
538 sample[length] = (uint8_t)(pDecoinfo->output_ndl_seconds / 60); |
| 281 | 539 |
| 540 // Limit stored sample within 0 to 240 mins (Since it's 8bit UINT only) | |
| 541 if ((pDecoinfo->output_ndl_seconds / 60) > 240) sample[length] = 240; | |
| 542 if ((pDecoinfo->output_ndl_seconds / 60) < 0) sample[length] = 0; | |
| 543 | |
| 38 | 544 length += 1; |
| 545 } | |
| 546 else if(pDecoinfo->output_time_to_surface_seconds) | |
| 547 { | |
| 548 tHome_findNextStop(pDecoinfo->output_stop_length_seconds, &nextstopDepthMeter, &nextstopLengthSeconds); | |
| 549 nextstopLengthMinutes = (nextstopLengthSeconds +59 ) / 60; | |
| 550 | |
| 551 sample[length] = nextstopDepthMeter; | |
| 552 length += 1; | |
| 553 sample[length] = nextstopLengthMinutes; | |
| 554 length += 1; | |
| 555 } | |
| 556 else | |
| 557 { | |
| 558 sample[length] = 0; | |
| 559 length += 1; | |
| 560 sample[length] = 0; | |
| 561 length += 1; | |
| 562 } | |
| 563 } | |
| 564 else | |
| 565 { | |
| 566 divisor.deco_ndl --; | |
| 567 } | |
| 568 } | |
| 569 | |
| 570 | |
| 571 if(smallHeader.ppo2Divisor) | |
| 572 { | |
| 573 if(divisor.ppo2 == 0) | |
| 574 { | |
| 575 divisor.ppo2 = smallHeader.ppo2Divisor - 1; | |
| 576 | |
| 577 for(int i = 0; i <3; i++) | |
| 578 { | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
579 sample[length] = (uint8_t)(state->lifeData.ppO2Sensor_bar[i] * 100.0f + 0.5f); |
| 38 | 580 length += 1; |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
581 addU16(&sample[length], (uint16_t)(state->lifeData.sensorVoltage_mV[i] * 10.0f + 0.5f)); |
| 38 | 582 length += 2; |
| 583 } | |
| 584 } | |
| 585 else | |
| 586 { | |
| 587 divisor.ppo2--; | |
| 588 } | |
| 589 } | |
| 590 | |
| 591 | |
| 592 if(smallHeader.decoplanDivisor) | |
| 593 { | |
| 594 if(divisor.decoplan == 0) | |
| 595 { | |
| 596 divisor.decoplan = smallHeader.decoplanDivisor - 1; | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
597 if(state->diveSettings.deco_type.ub.standard == VPM_MODE) |
| 38 | 598 { |
| 599 for(int i = 0; i <15; i++) | |
| 600 { | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
601 sample[length] = state->decolistVPM.output_stop_length_seconds[i] / 60; |
| 38 | 602 length += 1; |
| 603 } | |
| 604 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
605 else if(state->diveSettings.deco_type.ub.standard == GF_MODE) |
| 38 | 606 { |
| 607 for(int i = 0; i <15; i++) | |
| 608 { | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
609 sample[length] = state->decolistBuehlmann.output_stop_length_seconds[i] / 60; |
| 38 | 610 length += 1; |
| 611 } | |
| 612 } | |
| 613 else | |
| 614 { | |
| 615 for(int i = 0; i <15; i++) | |
| 616 { | |
| 617 sample[length] = 0; | |
| 618 length += 1; | |
| 619 } | |
| 620 } | |
| 621 // add16(&sample[length], state.temperature); | |
| 622 //length += 2; | |
| 623 } | |
| 624 else | |
| 625 { | |
| 626 divisor.decoplan --; | |
| 627 } | |
| 628 } | |
| 629 if(divisor.cns == 0) | |
| 630 { | |
| 631 divisor.cns = smallHeader.cnsDivisor - 1; | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
632 addU16(&sample[length], (uint16_t)state->lifeData.cns); |
| 38 | 633 length += 2; |
| 634 } | |
| 635 else | |
| 636 { | |
| 637 divisor.cns--; | |
| 638 } | |
| 639 | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
640 #ifdef ENABLE_BOTTLE_SENSOR |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
641 if(smallHeader.tankDivisor) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
642 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
643 if(divisor.tank == 0) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
644 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
645 divisor.tank = smallHeader.tankDivisor - 1; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
646 addS16(&sample[length], ((state->lifeData.bottle_bar[state->lifeData.actualGas.GasIdInSettings]))); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
647 length += smallHeader.tankLength; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
648 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
649 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
650 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
651 divisor.tank--; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
652 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
653 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
654 #endif |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
655 |
| 38 | 656 profileByteFlag.uw = length - 3; |
| 657 if(eventByte1.uw) | |
| 658 { | |
| 659 profileByteFlag.ub.bit7 = 1; | |
| 660 } | |
| 661 sample[2] = profileByteFlag.uw; | |
| 662 logbook_writedata((void *) sample,length); | |
| 663 | |
| 664 } | |
| 665 | |
| 666 /** | |
| 667 ****************************************************************************** | |
| 668 * @brief readSample. / Reads data of one logbook sample | |
| 281 | 669 * @author heinrichs weikamp |
| 38 | 670 * @version V0.0.1 |
| 671 * @date 22-April-2014 | |
| 672 ****************************************************************************** | |
| 673 * | |
| 674 * @param int32_t* depth: output Value | |
| 675 * @param int16_t * gasid: output Value | |
| 676 * @param int32_t* temperature: output Value | |
| 677 * @param int32_t* sensor1, sensor2, sensor3: output Value | |
| 678 * @param int32_t* cns: output Value | |
| 679 * @return bytes read / 0 = reading Error | |
| 680 */ | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
681 static uint16_t readSample(int32_t* depth, int16_t * gasid, int16_t* setpoint_cbar, int32_t* temperature, int32_t* sensor1, int32_t* sensor2, |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
682 int32_t* sensor3, int32_t* cns, SManualGas* manualGas, int16_t* bailout, int16_t* decostopDepth, uint16_t* tank) |
| 38 | 683 { |
| 684 int length = 0; | |
| 685 _Bool bEvent = 0; | |
| 686 bit8_Type eventByte1, eventByte2; | |
| 687 bit8_Type profileByteFlag; | |
| 688 | |
| 689 eventByte1.uw = 0; | |
| 690 eventByte2.uw = 0; | |
| 691 uint8_t tempU8 = 0; | |
| 692 uint16_t temp = 0; | |
| 693 uint16_t bytesRead = 0; | |
| 694 | |
| 695 if(gasid) | |
| 696 *gasid = -1; | |
| 697 if(temperature) | |
| 698 *temperature = -1000; | |
| 699 if(sensor1) | |
| 700 *sensor1 = -1; | |
| 701 if(sensor2) | |
| 702 *sensor2 = -1; | |
| 703 if(sensor3) | |
| 704 *sensor3 = -1; | |
| 705 if(cns) | |
| 706 *cns = -1; | |
| 707 if(setpoint_cbar) | |
| 708 *setpoint_cbar = -1; | |
| 709 if(bailout) | |
| 710 *bailout = -1; | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
711 if(tank) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
712 *tank = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
713 |
| 38 | 714 if(manualGas) |
| 715 { | |
| 716 manualGas->percentageO2 =-1; | |
| 717 manualGas->percentageHe =-1; | |
| 718 } | |
| 719 if(decostopDepth) | |
| 720 *decostopDepth = -1; | |
| 721 | |
| 722 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); | |
| 723 if(depth) | |
| 724 *depth = (int32_t)temp; | |
| 725 bytesRead += 2; | |
| 726 | |
| 727 ext_flash_read_next_sample_part( &profileByteFlag.uw, 1); | |
| 728 bytesRead ++; | |
| 729 | |
| 730 bEvent = profileByteFlag.ub.bit7; | |
| 731 profileByteFlag.ub.bit7 = 0; | |
| 732 length = profileByteFlag.uw; | |
| 733 | |
| 734 if(bEvent) | |
| 735 { | |
| 736 ext_flash_read_next_sample_part( &eventByte1.uw, 1); | |
| 737 bytesRead ++; | |
| 738 | |
| 739 length--; | |
| 740 | |
| 741 //second event byte | |
| 742 if(eventByte1.ub.bit7) | |
| 743 { | |
| 744 ext_flash_read_next_sample_part( &eventByte2.uw, 1); | |
| 745 bytesRead ++; | |
| 746 length--; | |
| 747 } | |
| 748 else | |
| 749 { | |
| 750 eventByte2.uw = 0; | |
| 751 } | |
| 752 | |
| 753 //manual Gas Set | |
| 754 if( eventByte1.ub.bit4) | |
| 755 { | |
| 756 //Evaluate manual Gas | |
| 757 ext_flash_read_next_sample_part( (uint8_t*)&tempU8, 1); | |
| 758 bytesRead +=1; | |
| 759 length -= 1; | |
| 760 manualGas->percentageO2 = tempU8; | |
| 761 ext_flash_read_next_sample_part( (uint8_t*)&tempU8, 1); | |
| 762 bytesRead +=1; | |
| 763 length -= 1; | |
| 764 manualGas->percentageHe = tempU8; | |
| 765 if(gasid) | |
| 766 *gasid = 0; | |
| 767 } | |
| 768 //gas change | |
| 769 if( eventByte1.ub.bit5) | |
| 770 { | |
| 771 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 772 bytesRead +=1; | |
| 773 length -= 1; | |
| 774 if(gasid) | |
| 775 *gasid = (uint16_t)tempU8; | |
| 776 } | |
| 777 //SetpointChange | |
| 778 if( eventByte1.ub.bit6) | |
| 779 { | |
| 780 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 781 *setpoint_cbar = tempU8; | |
| 782 bytesRead +=1; | |
| 783 length -= 1; | |
| 784 } | |
| 785 | |
| 786 // second event Byte | |
| 787 //bailout | |
|
298
50c26a4442af
Bugfix: fix drawing of CCR bailout profile
Jan Mulder <jlmulder@xs4all.nl>
parents:
283
diff
changeset
|
788 if(eventByte2.ub.bit0) |
| 38 | 789 { |
| 790 //evaluate bailout gas Gas | |
| 791 *bailout = 1; | |
| 792 | |
| 793 ext_flash_read_next_sample_part( (uint8_t*)&tempU8, 1); | |
| 794 bytesRead +=1; | |
| 795 length -= 1; | |
| 796 manualGas->percentageO2 = tempU8; | |
| 797 ext_flash_read_next_sample_part( (uint8_t*)&tempU8, 1); | |
| 798 bytesRead +=1; | |
| 799 length -= 1; | |
| 800 manualGas->percentageHe = tempU8; | |
| 801 | |
| 802 if(gasid) | |
| 803 *gasid = 0; | |
| 804 } | |
| 805 } | |
| 806 | |
| 807 if(divisor.temperature == 0) | |
| 808 { | |
| 809 divisor.temperature = smallHeader.tempDivisor - 1; | |
| 810 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); | |
| 811 bytesRead +=2; | |
| 812 length -= 2; | |
| 813 if(temperature) | |
| 814 { | |
| 815 *temperature = (int32_t)temp; | |
| 816 } | |
| 817 } | |
| 818 else | |
| 819 { | |
| 820 divisor.temperature--; | |
| 821 } | |
| 822 | |
| 823 if(smallHeader.deco_ndlDivisor > 0) | |
| 824 { | |
| 825 if(divisor.deco_ndl == 0) | |
| 826 { | |
| 827 divisor.deco_ndl = smallHeader.deco_ndlDivisor - 1; | |
| 828 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 829 if(decostopDepth) | |
| 830 { | |
| 831 *decostopDepth = tempU8 * 100; | |
| 832 } | |
| 833 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 834 bytesRead += 2; | |
| 835 length -= 2; | |
| 836 } | |
| 837 else | |
| 838 { | |
| 839 divisor.deco_ndl--; | |
| 840 } | |
| 841 } | |
| 842 | |
| 843 if(divisor.ppo2 == 0) | |
| 844 { | |
| 845 int32_t ppO2Tmp = 0; | |
| 846 divisor.ppo2 = smallHeader.ppo2Divisor -1; | |
| 847 for(int i = 0; i <3 ; i++) | |
| 848 { | |
| 849 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 850 ppO2Tmp += tempU8; | |
| 851 bytesRead +=1; | |
| 852 length -= 1; | |
| 853 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); | |
| 854 bytesRead +=2; | |
| 855 length -= 2; | |
| 856 if(sensor1 && (i==0)) | |
| 857 *sensor1 = (((int32_t)tempU8) * 0xFFFF) + temp; | |
| 858 if(sensor2 && (i==1)) | |
| 859 *sensor2 = (((int32_t)tempU8) * 0xFFFF) + temp; | |
| 860 if(sensor3 && (i==2)) | |
| 861 *sensor3 = (((int32_t)tempU8) * 0xFFFF) + temp; | |
| 862 } | |
| 863 } | |
| 864 else | |
| 865 { | |
| 866 divisor.ppo2--; | |
| 867 } | |
| 868 | |
| 869 if(smallHeader.decoplanDivisor > 0) | |
| 870 { | |
| 871 if(divisor.decoplan == 0) | |
| 872 { | |
| 873 divisor.decoplan = smallHeader.decoplanDivisor - 1; | |
| 874 for(int i = 0; i <15; i++) | |
| 875 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 876 bytesRead += 15; | |
| 877 length -= 15; | |
| 878 } | |
| 879 else | |
| 880 { | |
| 881 divisor.decoplan--; | |
| 882 } | |
| 883 } | |
| 884 | |
| 885 | |
| 886 | |
| 887 if(divisor.cns == 0) | |
| 888 { | |
| 889 divisor.cns = smallHeader.cnsDivisor - 1; | |
| 890 | |
| 891 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); | |
| 892 bytesRead +=2; | |
| 893 length -= 2; | |
| 894 if(cns) | |
| 895 { | |
| 896 *cns = (int32_t)temp; | |
| 897 } | |
| 898 } | |
| 899 else | |
| 900 { | |
| 901 divisor.cns--; | |
| 902 } | |
| 903 | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
904 if(smallHeader.tankDivisor) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
905 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
906 if(divisor.tank == 0) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
907 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
908 divisor.tank = smallHeader.tankDivisor - 1; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
909 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
910 bytesRead +=2; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
911 length -= 2; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
912 if(tank) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
913 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
914 *tank = (uint16_t)temp; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
915 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
916 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
917 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
918 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
919 divisor.tank--; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
920 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
921 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
922 |
| 38 | 923 if (length != 0) |
| 924 return 0; | |
| 925 | |
| 926 return bytesRead; | |
| 927 } | |
| 928 /** | |
| 929 ****************************************************************************** | |
| 930 * @brief logbook_readSampleData. / Reads sample data of whole logbook entry | |
| 281 | 931 * @author heinrichs weikamp |
| 38 | 932 * @version V0.0.1 |
| 933 * @date 22-April-2014 | |
| 934 ****************************************************************************** | |
| 935 * | |
| 936 * @param uint8_t StepBackwards: witch lookbook entry? | |
| 937 * @param uint16_t length : maxlength of output arrays | |
| 938 * @param int32_t* depth : output array | |
| 939 * @param int16_t * gasid : output array | |
| 940 * @param int32_t* temperature : output array | |
| 941 * @param int32_t* ppo2 : output array | |
| 942 * @param int32_t* cns : output array | |
| 943 * @return length of output | |
| 944 */ | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
945 uint16_t logbook_readSampleData(uint8_t StepBackwards, uint16_t length,uint16_t* depth, uint8_t* gasid, int16_t* temperature, uint16_t* ppo2, |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
946 uint16_t* setpoint, uint16_t* sensor1, uint16_t* sensor2, uint16_t* sensor3, uint16_t* cns, uint8_t* bailout, |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
947 uint16_t* decostopDepth, uint16_t* tank) |
| 38 | 948 { |
| 949 //Test read | |
| 950 //SLogbookHeader header; | |
| 951 | |
| 952 //logbook_getHeader(&header); | |
| 953 SLogbookHeader header; | |
| 458 | 954 int16_t iNum; |
| 955 int16_t firstgasid = 0; | |
| 956 uint16_t retVal = 0; | |
| 957 int16_t compression = 0; | |
| 958 int16_t i; | |
| 38 | 959 // uint32_t diveTime_seconds; |
| 960 int32_t depthVal = 0; | |
| 961 int16_t gasidVal = 0; | |
| 962 int16_t setPointVal = 0; | |
| 963 int16_t bailoutVal = 0; | |
| 964 int16_t bailoutLast = 0; | |
| 965 uint16_t setPointLast = 0; | |
| 966 int32_t temperatureVal = 0; | |
| 967 int32_t sensor1Val = 0; | |
| 968 int32_t sensor2Val = 0; | |
| 969 int32_t sensor3Val = 0; | |
| 970 int32_t sensor1Last = 0; | |
| 971 int32_t sensor2Last = 0; | |
| 972 int32_t sensor3Last = 0; | |
| 973 int32_t cnsVal = 0; | |
| 974 int32_t depthLast = 0; | |
| 975 int16_t gasidLast = 0; | |
| 976 int32_t temperatureLast = 0; | |
| 977 int32_t temperatureFirst = 0; | |
| 978 int32_t cnsLast = 0; | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
979 int16_t decostepDepthVal = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
980 int16_t decostepDepthLast = 0; |
| 457 | 981 uint16_t tankVal = 0; |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
982 uint32_t small_profileLength = 0; |
| 38 | 983 |
| 984 SManualGas manualGasVal; | |
| 985 SManualGas manualGasLast; | |
| 986 manualGasLast.percentageO2 = 0; | |
| 987 manualGasLast.percentageHe = 0; | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
988 uint16_t numSamples = 0; |
| 38 | 989 |
| 990 float ambiant_pressure_bar = 0; | |
| 991 float ppO2 = 0; | |
| 992 ext_flash_read_dive_header((uint8_t*)&header, StepBackwards); | |
| 993 for(i = 0;i< 5;i++) | |
| 994 { | |
| 995 if(header.gasordil[i].note.ub.first) | |
| 996 break; | |
| 997 } | |
| 998 firstgasid = i + 1; | |
| 999 if(header.diveMode == DIVEMODE_CCR) | |
| 1000 setPointLast = header.setpoint[0].setpoint_cbar; | |
| 1001 else | |
| 1002 setPointLast = 0; | |
| 1003 //diveTime_seconds = header.diveTime_seconds ; | |
| 1004 for(compression = 1; compression < 100; compression ++) | |
| 1005 { | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1006 numSamples = (header.total_diveTime_seconds / header.samplingRate)/compression; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1007 if(numSamples <= length) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1008 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1009 break; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1010 } |
| 38 | 1011 } |
| 1012 | |
| 1013 | |
| 1014 for(i = 0;i< length;i++) | |
| 1015 { | |
| 1016 if(depth) | |
| 1017 depth[i] = 0; | |
| 1018 if(temperature) | |
| 1019 temperature[i] = 0; | |
| 1020 if(gasid) | |
| 1021 gasid[i] = 0; | |
| 1022 if(ppo2) | |
| 1023 ppo2[i] = 0; | |
| 1024 if(setpoint) | |
| 1025 setpoint[i] = 0; | |
| 1026 if(sensor1) | |
| 1027 sensor1[i] = 0; | |
| 1028 if(sensor2) | |
| 1029 sensor2[i] = 0; | |
| 1030 if(sensor3) | |
| 1031 sensor3[i] = 0; | |
| 1032 if(cns) | |
| 1033 cns[i] = 0; | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1034 if(tank) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1035 tank[i] = 0; |
| 38 | 1036 } |
| 1037 //We start with fist gasid | |
| 1038 gasidLast = firstgasid; | |
| 1039 | |
| 1040 | |
| 1041 //uint16_t* ppo2, uint16_t* cns# | |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1042 uint32_t totalNumberOfBytes = 0; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1043 uint32_t bytesRead = 0; |
| 38 | 1044 ext_flash_open_read_sample( StepBackwards,&totalNumberOfBytes); |
| 1045 ext_flash_read_next_sample_part((uint8_t*)&smallHeader, sizeof(SSmallHeader)); | |
| 1046 bytesRead += sizeof(SSmallHeader); | |
| 1047 | |
| 1048 clear_divisor(); | |
| 1049 | |
| 1050 iNum = 0; | |
| 1051 int counter = 0; | |
| 1052 temperatureLast = -1000; | |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1053 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1054 small_profileLength = (smallHeader.profileLength[2] << 16) + (smallHeader.profileLength[1] << 8) + smallHeader.profileLength[0]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1055 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1056 if(totalNumberOfBytes == small_profileLength) /* sizes provided by header and small header are the same => real data */ |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1057 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1058 while ((bytesRead < totalNumberOfBytes) && (iNum < length)) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1059 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1060 ext_flash_set_entry_point(); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1061 divisorBackup = divisor; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1062 retVal = readSample(&depthVal,&gasidVal, &setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1063 &bailoutVal, &decostepDepthVal, &tankVal); |
| 38 | 1064 |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1065 if(retVal == 0) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1066 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1067 //Error try to read again!!! |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1068 ext_flash_reopen_read_sample_at_entry_point(); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1069 divisor = divisorBackup; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1070 retVal = readSample(&depthVal,&gasidVal,&setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1071 &manualGasVal, &bailoutVal, &decostepDepthVal, &tankVal); |
| 38 | 1072 |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1073 if(retVal == 0) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1074 break; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1075 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1076 bytesRead +=retVal; |
| 38 | 1077 |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1078 //if for some variable no new value is in the sample for (z.B. gasidVal = -1), we take the last value |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1079 if(depthVal == -1) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1080 depthVal = depthLast; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1081 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1082 depthLast = depthVal; |
| 38 | 1083 |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1084 if(gasidVal == -1) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1085 gasidVal = gasidLast; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1086 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1087 gasidLast = gasidVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1088 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1089 if(temperatureVal == -1000) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1090 temperatureVal = temperatureLast; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1091 else |
| 38 | 1092 { |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1093 if(temperatureLast == -1000) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1094 temperatureFirst = temperatureVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1095 temperatureLast = temperatureVal; |
| 38 | 1096 } |
| 1097 | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1098 if(setPointVal == -1) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1099 setPointVal = setPointLast; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1100 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1101 setPointLast = setPointVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1102 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1103 if(sensor1Val == -1) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1104 sensor1Val = sensor1Last; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1105 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1106 sensor1Last = sensor1Val; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1107 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1108 if(sensor2Val == -1) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1109 sensor2Val = sensor2Last; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1110 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1111 sensor2Last = sensor2Val; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1112 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1113 if(sensor3Val == -1) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1114 sensor3Val = sensor3Last; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1115 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1116 sensor3Last = sensor3Val; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1117 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1118 if(cnsVal == -1) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1119 cnsVal = cnsLast; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1120 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1121 cnsLast = cnsVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1122 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1123 if(manualGasVal.percentageO2 == -1) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1124 manualGasVal = manualGasLast; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1125 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1126 manualGasLast = manualGasVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1127 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1128 if(bailoutVal == -1) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1129 bailoutVal = bailoutLast; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1130 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1131 bailoutLast = bailoutVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1132 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1133 if(decostepDepthVal == -1) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1134 decostepDepthVal = decostepDepthLast; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1135 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1136 decostepDepthLast = decostepDepthVal; |
| 38 | 1137 |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1138 counter++; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1139 // Heed compression |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1140 // Write here to arrays |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1141 if(counter == compression) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1142 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1143 if(depth) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1144 depth[iNum] = depthVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1145 if(gasid) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1146 gasid[iNum] = gasidVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1147 if(temperature) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1148 temperature[iNum] = temperatureVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1149 if(cns) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1150 cns[iNum] = cnsVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1151 if(bailout) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1152 bailout[iNum] = bailoutVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1153 if(decostopDepth) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1154 decostopDepth[iNum] = decostepDepthVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1155 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1156 if(ppo2) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1157 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1158 //Calc ppo2 - Values |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1159 SGas gas; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1160 gas.setPoint_cbar = setPointVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1161 if(gasidVal > 0) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1162 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1163 gas.helium_percentage = header.gasordil[gasidVal - 1].helium_percentage; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1164 gas.nitrogen_percentage = 100 - gas.helium_percentage - header.gasordil[gasidVal - 1].oxygen_percentage; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1165 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1166 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1167 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1168 gas.helium_percentage = manualGasVal.percentageHe; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1169 gas.nitrogen_percentage = 100 - gas.helium_percentage - manualGasVal.percentageO2; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1170 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1171 ambiant_pressure_bar =((float)(depthVal + header.surfacePressure_mbar))/1000; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1172 ppO2 = decom_calc_ppO2(ambiant_pressure_bar, &gas ); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1173 ppo2[iNum] = (uint16_t) ( ppO2 * 100); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1174 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1175 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1176 if(tank) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1177 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1178 tank[iNum] = tankVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1179 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1180 if(setpoint) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1181 setpoint[iNum] = setPointVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1182 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1183 if(sensor1) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1184 sensor1[iNum] = (sensor1Val / 0xFFFF) & 0xFF; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1185 if(sensor2) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1186 sensor2[iNum] = (sensor2Val / 0xFFFF) & 0xFF; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1187 if(sensor3) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1188 sensor3[iNum] = (sensor3Val / 0xFFFF) & 0xFF; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1189 iNum++; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1190 counter = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1191 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1192 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1193 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1194 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1195 { |
| 458 | 1196 logbook_createDummyProfile(&header, numSamples, depth, temperature, ppo2); |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1197 iNum = numSamples; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1198 } |
| 38 | 1199 |
| 1200 // Fix first Temperature Entries 150930 hw | |
| 1201 if(temperature) | |
| 1202 { | |
| 1203 int i = 0; | |
| 1204 while((temperature[i] == -1000) && (i < iNum)) | |
| 1205 temperature[i++] = temperatureFirst; | |
| 1206 } | |
| 1207 | |
| 1208 ext_flash_close_read_sample(); | |
| 1209 return iNum; | |
| 1210 } | |
| 1211 | |
| 1212 | |
| 1213 /******************************************************************************** | |
| 1214 * @brief logbook_InitAndWrite. / Controls writing of logbook | |
| 1215 * Should be called ten times per second | |
| 1216 * Automatically Initializes logbook at beginning of dive, | |
| 1217 * write samples every 2 seconds | |
| 1218 * and finishes logbook after end of dive | |
| 1219 *********************************************************************************/ | |
| 1220 | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1221 void logbook_InitAndWrite(const SDiveState *pStateReal) |
| 38 | 1222 { |
| 1223 SSettings *pSettings = settingsGetPointer(); | |
| 1224 static uint8_t bDiveMode = 0; | |
| 1225 static uint32_t tickstart = 0; | |
| 1226 uint32_t ticksdiff = 0; | |
| 1227 uint32_t lasttick = 0; | |
| 1228 static float min_temperature_float_celsius = 0; | |
| 1229 | |
| 1230 if(!bDiveMode) | |
| 1231 { | |
| 1232 if((pStateReal->mode == MODE_DIVE) && (pStateReal->diveSettings.diveMode != DIVEMODE_Apnea) && (pStateReal->lifeData.dive_time_seconds >= 5)) | |
| 1233 { | |
| 1234 //InitdiveProfile | |
| 1235 pSettings->totalDiveCounter++; | |
| 1236 logbook_initNewdiveProfile(pStateReal,settingsGetPointer()); | |
| 1237 min_temperature_float_celsius = pStateReal->lifeData.temperature_celsius; | |
| 1238 //Write logbook sample | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1239 logbook_writeSample(pStateReal); |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1240 resetEvents(pStateReal); |
| 38 | 1241 tickstart = HAL_GetTick(); |
| 1242 bDiveMode = 1; | |
| 1243 } | |
| 1244 } | |
| 1245 else if((pStateReal->mode == MODE_DIVE) && (pStateReal->diveSettings.diveMode != DIVEMODE_Apnea)) | |
| 1246 { | |
| 1247 lasttick = HAL_GetTick(); | |
| 1248 ticksdiff = time_elapsed_ms(tickstart,lasttick); | |
| 1249 // | |
| 1250 if(ticksdiff >= 2000) | |
| 1251 { | |
| 1252 //Write logbook sample | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1253 logbook_writeSample(pStateReal); |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1254 resetEvents(pStateReal); |
| 38 | 1255 if(min_temperature_float_celsius > pStateReal->lifeData.temperature_celsius) |
| 1256 min_temperature_float_celsius = pStateReal->lifeData.temperature_celsius; | |
| 1257 tickstart = lasttick; | |
| 1258 if((bDiveMode == 1) && (pStateReal->lifeData.dive_time_seconds >= pSettings->divetimeToCreateLogbook)) | |
| 1259 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1260 ext_flash_create_new_dive_log((uint8_t*)&gheader); |
| 38 | 1261 /** save settings |
| 1262 * with new lastDiveLogId and time and day | |
| 1263 */ | |
| 1264 pSettings->personalDiveCount++; | |
| 1265 if(pSettings->logbookOffset) | |
| 1266 { | |
| 1267 pSettings->logbookOffset++; | |
| 1268 } | |
| 427 | 1269 ext_flash_write_settings(0); |
| 38 | 1270 ext_flash_disable_protection_for_logbook(); |
|
426
514e6269256f
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
411
diff
changeset
|
1271 |
|
514e6269256f
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
411
diff
changeset
|
1272 ext_flash_CloseSector(); /* this is just a repair function which invalidates a not used sector in case a log maintenance was called before dive */ |
| 38 | 1273 bDiveMode = 3; |
| 1274 } | |
| 1275 if(bDiveMode == 3) | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1276 logbook_UpdateHeader(pStateReal); |
| 38 | 1277 } |
| 1278 } | |
| 1279 else if(bDiveMode == 3) | |
| 1280 { | |
| 1281 //End of Dive | |
| 1282 logbook_SetAverageDepth(pStateReal->lifeData.average_depth_meter); | |
| 1283 logbook_SetMinTemperature(min_temperature_float_celsius); | |
| 1284 logbook_SetMaxCNS(pStateReal->lifeData.cns); | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1285 logbook_SetCompartmentDesaturation(pStateReal); |
| 38 | 1286 logbook_SetLastStop(pStateReal->diveSettings.last_stop_depth_bar); |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1287 gheader.batteryVoltage = pStateReal->lifeData.battery_voltage * 1000; |
|
471
73da921869d9
bugfix: implement battery charge percentage in dive header
Jan Mulder <jlmulder@xs4all.nl>
parents:
465
diff
changeset
|
1288 gheader.batteryCharge = pStateReal->lifeData.battery_charge; |
| 38 | 1289 logbook_EndDive(); |
| 1290 bDiveMode = 0; | |
| 1291 } else | |
| 1292 { | |
| 1293 ext_flash_enable_protection(); | |
| 1294 } | |
| 1295 } | |
| 1296 | |
| 1297 | |
| 1298 /* Private functions ---------------------------------------------------------*/ | |
| 1299 | |
| 1300 /******************************************************************************** | |
| 1301 * @brief logbook_UpdateHeader. / | |
| 1302 * set date, time, max depth. etc. pp. | |
| 1303 * the internal pointer to the end of profile and length will be set by | |
| 1304 ext_flash_close_new_dive_log() in externLogbookFlash.c | |
| 1305 * @author heinrichs weikamp gmbh | |
| 1306 * @version V0.0.1 | |
| 1307 * @date 27-Nov-2014 | |
| 1308 *********************************************************************************/ | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1309 static void logbook_UpdateHeader(const SDiveState *pStateReal) |
| 38 | 1310 { |
| 1311 // uint16_t secondsAtShallow = 0; | |
| 1312 RTC_DateTypeDef Sdate; | |
| 1313 RTC_TimeTypeDef Stime; | |
| 1314 uint32_t time1_u32, time2_u32; | |
| 1315 uint32_t divetimeHelper; | |
| 1316 | |
| 1317 /* time and day */ | |
| 1318 /* don't update CHANGE 160224 hw, maybe save actual time and date at other place | |
| 1319 translateDate(pStateReal->lifeData.dateBinaryFormat, &Sdate); | |
| 1320 translateTime(pStateReal->lifeData.timeBinaryFormat, &Stime); | |
| 1321 | |
| 1322 header.dateYear = Sdate.Year; | |
| 1323 header.dateMonth = Sdate.Month; | |
| 1324 header.dateDay = Sdate.Date; | |
| 1325 header.timeHour = Stime.Hours; | |
| 1326 header.timeMinute = Stime.Minutes; | |
| 1327 */ | |
| 1328 /// 160315 Quick fix for empty date problem | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1329 if((!(gheader.dateYear)) || (!(gheader.dateMonth)) || (!(gheader.dateDay))) |
| 38 | 1330 { |
| 1331 translateDate(pStateReal->lifeData.dateBinaryFormat, &Sdate); | |
| 1332 translateTime(pStateReal->lifeData.timeBinaryFormat, &Stime); | |
| 1333 | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1334 gheader.dateYear = Sdate.Year; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1335 gheader.dateMonth = Sdate.Month; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1336 gheader.dateDay = Sdate.Date; |
| 38 | 1337 |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1338 time1_u32 = (uint32_t)gheader.timeMinute + (uint32_t)(gheader.timeHour * 60); |
| 38 | 1339 time2_u32 = (uint32_t)Stime.Minutes + (uint32_t)(Stime.Hours * 60); |
| 1340 if(time2_u32 < time1_u32) | |
| 1341 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1342 if(gheader.dateDay > 1) |
| 38 | 1343 { |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1344 gheader.dateDay -= 1; |
| 38 | 1345 } |
| 1346 else | |
| 1347 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1348 gheader.dateMonth --; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1349 if(!gheader.dateMonth) |
| 38 | 1350 { |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1351 gheader.dateYear--; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1352 gheader.dateMonth = 12; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1353 gheader.dateDay = 31; |
| 38 | 1354 } |
| 1355 else | |
| 1356 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1357 if(gheader.dateMonth == 2) |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1358 gheader.dateDay = 28; |
| 38 | 1359 else |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1360 if((gheader.dateMonth == 4) || (gheader.dateMonth == 6) || (gheader.dateMonth == 9) || (gheader.dateMonth == 11)) |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1361 gheader.dateDay = 30; |
| 38 | 1362 else |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1363 gheader.dateDay = 31; |
| 38 | 1364 } |
| 1365 } | |
| 1366 } | |
| 1367 } | |
| 1368 | |
| 1369 /* duration */ | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1370 gheader.total_diveTime_seconds = pStateReal->lifeData.dive_time_seconds; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1371 gheader.maxDepth = pStateReal->lifeData.max_depth_meter * 100; |
| 38 | 1372 |
| 1373 /* old: | |
| 1374 | |
| 1375 secondsAtShallow = pSettings->timeoutDiveReachedZeroDepth; | |
| 1376 if(pStateReal->lifeData.dive_time_seconds <= secondsAtShallow) | |
| 1377 secondsAtShallow = 0; | |
| 1378 header.diveTimeMinutes = (header.total_diveTime_seconds - secondsAtShallow )/ 60; | |
| 1379 header.diveTimeSeconds = header.total_diveTime_seconds - secondsAtShallow - (header.diveTimeMinutes * 60); | |
| 1380 */ | |
| 1381 divetimeHelper = pStateReal->lifeData.dive_time_seconds_without_surface_time; | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1382 gheader.diveTimeMinutes = (uint16_t)(divetimeHelper/60); |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1383 divetimeHelper -= 60 * (uint32_t)gheader.diveTimeMinutes; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1384 gheader.diveTimeSeconds = (uint16_t)divetimeHelper; |
| 38 | 1385 |
| 1386 /* deco algorithm (final) */ | |
| 1387 if(pStateReal->diveSettings.deco_type.ub.standard == GF_MODE) | |
| 1388 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1389 gheader.decoModel = 1; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1390 gheader.gfLow_or_Vpm_conservatism = pStateReal->diveSettings.gf_low; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1391 gheader.gfHigh = pStateReal->diveSettings.gf_high; |
| 38 | 1392 } |
| 1393 else | |
| 1394 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1395 gheader.decoModel = 2; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1396 gheader.gfLow_or_Vpm_conservatism = pStateReal->diveSettings.vpm_conservatism; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1397 gheader.gfHigh = 0; |
| 38 | 1398 } |
| 1399 | |
| 1400 /* tissue load */ | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1401 memcpy(gheader.n2Compartments, pStateReal->lifeData.tissue_nitrogen_bar, 64); |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1402 memcpy(gheader.heCompartments, pStateReal->lifeData.tissue_helium_bar, 64); |
| 38 | 1403 |
| 1404 } | |
| 1405 | |
| 1406 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
1407 static void logbook_SetAverageDepth(float average_depth_meter) |
| 38 | 1408 { |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1409 gheader.averageDepth_mbar = (uint16_t)(average_depth_meter * 100); |
| 38 | 1410 } |
| 1411 | |
| 1412 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
1413 static void logbook_SetMinTemperature(float min_temperature_celsius) |
| 38 | 1414 { |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1415 gheader.minTemp = (int16_t)((min_temperature_celsius * 10.0f) + 0.5f); |
| 38 | 1416 } |
| 1417 | |
| 1418 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
1419 static void logbook_SetMaxCNS(float max_cns_percentage) |
| 38 | 1420 { |
| 1421 if(max_cns_percentage < 9999) | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1422 gheader.maxCNS = (uint16_t)(max_cns_percentage); |
| 38 | 1423 else |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1424 gheader.maxCNS = 9999; |
| 38 | 1425 } |
| 1426 | |
| 1427 | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1428 static void logbook_SetCompartmentDesaturation(const SDiveState * pStateReal) |
| 38 | 1429 { |
|
225
2bb1db22b5f5
cleanup: random set of cleanups
Jan Mulder <jlmulder@xs4all.nl>
parents:
199
diff
changeset
|
1430 SLifeData2 secondaryInformation = { 0 }; |
| 38 | 1431 |
| 1432 decom_tissues_desaturation_time(&pStateReal->lifeData, &secondaryInformation); | |
| 1433 for(int i=0;i<16;i++) | |
| 1434 { | |
| 1435 if(secondaryInformation.tissue_nitrogen_desaturation_time_minutes[i] <= (15 * 255)) | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1436 gheader.n2CompartDesatTime_min[i] = (uint8_t)((secondaryInformation.tissue_nitrogen_desaturation_time_minutes[i] + 14) / 15); |
| 38 | 1437 else |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1438 gheader.n2CompartDesatTime_min[i] = 255; |
| 38 | 1439 if(secondaryInformation.tissue_helium_desaturation_time_minutes[i] <= (15 * 255)) |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1440 gheader.heCompartDesatTime_min[i] = (uint8_t)((secondaryInformation.tissue_helium_desaturation_time_minutes[i] + 14 )/ 15); |
| 38 | 1441 else |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1442 gheader.heCompartDesatTime_min[i] = 255; |
| 38 | 1443 } |
| 1444 } | |
| 1445 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
1446 static void logbook_SetLastStop(float last_stop_depth_bar) |
| 38 | 1447 { |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1448 gheader.lastDecostop_m = (uint8_t)(last_stop_depth_bar / 10.0f); |
| 38 | 1449 } |
| 1450 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
1451 static void logbook_writedata(void * data, int length_byte) |
| 38 | 1452 { |
| 1453 ext_flash_write_sample(data, length_byte); | |
| 1454 } | |
| 1455 | |
| 1456 /******************************************************************************** | |
| 1457 * @brief logbook_build_ostc3header. / | |
| 1458 * @author heinrichs weikamp gmbh | |
| 1459 * @version V0.0.2 | |
| 1460 * @date 27-Nov-2014 | |
| 1461 *********************************************************************************/ | |
| 1462 SLogbookHeaderOSTC3 * logbook_build_ostc3header(SLogbookHeader* pHead) | |
| 1463 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1464 convert_Type data,data2; |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1465 uint16_t dummyLength = 0; |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1466 uint8_t returnEmptyHeader = 0; |
| 38 | 1467 |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1468 uint32_t headerProfileLength, sampleProfileLength, sampleProfileStart; |
| 38 | 1469 |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1470 |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1471 if(pHead->diveHeaderStart != 0xFAFA) |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1472 { |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1473 returnEmptyHeader = 1; |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1474 } |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1475 else |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1476 { |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1477 memcpy(headerOSTC3.diveHeaderStart, &pHead->diveHeaderStart, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1478 memcpy(headerOSTC3.pBeginProfileData, &pHead->pBeginProfileData, 3); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1479 memcpy(headerOSTC3.pEndProfileData, &pHead->pEndProfileData, 3); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1480 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1481 data.u8bit.byteHigh = 0; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1482 data.u8bit.byteLow = pHead->pBeginProfileData[0]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1483 data.u8bit.byteMidLow = pHead->pBeginProfileData[1]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1484 data.u8bit.byteMidHigh = pHead->pBeginProfileData[2]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1485 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1486 sampleProfileStart = data.u32bit; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1487 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1488 data2.u8bit.byteHigh = 0; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1489 data2.u8bit.byteLow = pHead->pEndProfileData[0]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1490 data2.u8bit.byteMidLow = pHead->pEndProfileData[1]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1491 data2.u8bit.byteMidHigh = pHead->pEndProfileData[2]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1492 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1493 data.u8bit.byteHigh = 0; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1494 data.u8bit.byteLow = pHead->profileLength[0]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1495 data.u8bit.byteMidLow = pHead->profileLength[1]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1496 data.u8bit.byteMidHigh = pHead->profileLength[2]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1497 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1498 if(data.u32bit != 0xFFFFFF) /* if the profile in use ? */ |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1499 { |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1500 if(data2.u32bit < sampleProfileStart) /* Wrap around of sample ring detected */ |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1501 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1502 if(ext_flash_SampleOverrunValid() == 0) /* Wrap around does not seem to be valid => fallback */ |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1503 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1504 sampleProfileStart = 0; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1505 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1506 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1507 if( sampleProfileStart == 0) /* should never happen unless OSTC with older debug version is in use (or invalid overrun) */ |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1508 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1509 sampleProfileLength = 1; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1510 headerProfileLength = 2; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1511 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1512 else |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1513 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1514 headerProfileLength = (pHead->profileLength[2] << 16) + (pHead->profileLength[1] << 8) + pHead->profileLength[0]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1515 sampleProfileLength = ext_flash_read_profilelength_small_header(sampleProfileStart); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1516 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1517 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1518 if(sampleProfileLength != headerProfileLength) |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1519 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1520 dummyLength = logbook_fillDummySampleBuffer(pHead); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1521 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1522 data2.u32bit = sampleProfileStart + dummyLength; /* calc new end address (which is equal to dummyLength) */ |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1523 data.u32bit = dummyLength; /* data is used below to represent the length */ |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1524 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1525 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1526 data.u32bit += 3; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1527 headerOSTC3.profileLength[0] = data.u8bit.byteLow; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1528 headerOSTC3.profileLength[1] = data.u8bit.byteMidLow; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1529 headerOSTC3.profileLength[2] = data.u8bit.byteMidHigh; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1530 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1531 memcpy(headerOSTC3.gasordil, pHead->gasordil, 20); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1532 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1533 if(pHead->logbookProfileVersion == LOGBOOK_VERSION) |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1534 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1535 headerOSTC3.logbookProfileVersion = LOGBOOK_VERSION_OSTC3; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1536 memcpy(headerOSTC3.personalDiveCount, &pHead->personalDiveCount, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1537 headerOSTC3.safetyDistance_10cm = 0; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1538 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1539 for(int i=0;i<5;i++) |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1540 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1541 if(!pHead->gasordil[i].note.ub.active) |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1542 headerOSTC3.gasordil[3 + (i*4)] = 0; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1543 else if(pHead->gasordil[i].note.ub.first) |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1544 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1545 /* depth = 0, note = 1 */ |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1546 headerOSTC3.gasordil[2 + (i*4)] = 0; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1547 headerOSTC3.gasordil[3 + (i*4)] = 1; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1548 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1549 else if( pHead->gasordil[i].depth_meter) |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1550 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1551 /* note = 3 */ |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1552 headerOSTC3.gasordil[3 + (i*4)] = 3; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1553 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1554 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1555 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1556 else |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1557 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1558 headerOSTC3.logbookProfileVersion = 0xFF; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1559 headerOSTC3.personalDiveCount[0] = 0xFF; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1560 headerOSTC3.personalDiveCount[1] = 0xFF; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1561 headerOSTC3.safetyDistance_10cm = 0xFF; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1562 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1563 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1564 headerOSTC3.dateYear = pHead->dateYear; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1565 headerOSTC3.dateMonth = pHead->dateMonth; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1566 headerOSTC3.dateDay = pHead->dateDay; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1567 headerOSTC3.timeHour = pHead->timeHour; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1568 headerOSTC3.timeMinute = pHead->timeMinute; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1569 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1570 memcpy(headerOSTC3.maxDepth, &pHead->maxDepth, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1571 memcpy(headerOSTC3.diveTimeMinutes, &pHead->diveTimeMinutes, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1572 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1573 headerOSTC3.diveTimeSeconds = pHead->diveTimeSeconds; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1574 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1575 memcpy(headerOSTC3.minTemp, &pHead->minTemp, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1576 memcpy(headerOSTC3.surfacePressure_mbar,&pHead->surfacePressure_mbar, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1577 memcpy(headerOSTC3.desaturationTime, &pHead->desaturationTime, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1578 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1579 headerOSTC3.firmwareVersionHigh = pHead->firmwareVersionHigh; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1580 headerOSTC3.firmwareVersionLow = pHead->firmwareVersionLow; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1581 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1582 memcpy(headerOSTC3.batteryVoltage, &pHead->batteryVoltage, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1583 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1584 headerOSTC3.samplingRate = pHead->samplingRate; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1585 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1586 memcpy(headerOSTC3.cnsAtBeginning, &pHead->cnsAtBeginning, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1587 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1588 headerOSTC3.gfAtBeginning = pHead->gfAtBeginning; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1589 headerOSTC3.gfAtEnd = pHead->gfAtEnd; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1590 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1591 memcpy(headerOSTC3.setpoint, pHead->setpoint, 10); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1592 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1593 headerOSTC3.salinity = pHead->salinity; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1594 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1595 memcpy(headerOSTC3.maxCNS, &pHead->maxCNS, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1596 memcpy(headerOSTC3.averageDepth_mbar, &pHead->averageDepth_mbar, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1597 memcpy(headerOSTC3.total_diveTime_seconds, &pHead->total_diveTime_seconds, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1598 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1599 headerOSTC3.gfLow_or_Vpm_conservatism = pHead->gfLow_or_Vpm_conservatism; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1600 headerOSTC3.gfHigh = pHead->gfHigh; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1601 headerOSTC3.decoModel = pHead->decoModel; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1602 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1603 memcpy(headerOSTC3.diveNumber, &pHead->diveNumber, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1604 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1605 headerOSTC3.diveMode = pHead->diveMode; |
|
471
73da921869d9
bugfix: implement battery charge percentage in dive header
Jan Mulder <jlmulder@xs4all.nl>
parents:
465
diff
changeset
|
1606 headerOSTC3.batteryCharge = pHead->batteryCharge; |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1607 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1608 memcpy(headerOSTC3.n2CompartDesatTime_min,pHead->n2CompartDesatTime_min, 16); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1609 memcpy(headerOSTC3.n2Compartments, pHead->n2Compartments, 64); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1610 memcpy(headerOSTC3.heCompartDesatTime_min,pHead->heCompartDesatTime_min, 16); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1611 memcpy(headerOSTC3.heCompartments, pHead->heCompartments, 64); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1612 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1613 headerOSTC3.lastDecostop_m = pHead->lastDecostop_m; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1614 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1615 memcpy(headerOSTC3.hwHudBattery_mV, &pHead->hwHudBattery_mV, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1616 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1617 headerOSTC3.hwHudLastStatus = pHead->hwHudLastStatus; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1618 |
| 483 | 1619 memset(headerOSTC3.batteryGaugeRegisters, 0x00, 6); /* The battery registers are not evaluated => Set to zero */ |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1620 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1621 memcpy(headerOSTC3.diveHeaderEnd, &pHead->diveHeaderEnd, 2); |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1622 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1623 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1624 { |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1625 returnEmptyHeader = 1; |
| 38 | 1626 } |
| 1627 } | |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1628 if(returnEmptyHeader) /* profile not in use => return array full of 0xFF */ |
| 38 | 1629 { |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1630 memset(&headerOSTC3, 0xFF, sizeof(headerOSTC3)); |
| 38 | 1631 } |
| 1632 | |
| 1633 return &headerOSTC3; | |
| 1634 } | |
| 1635 | |
| 1636 | |
| 1637 /******************************************************************************** | |
| 1638 * @brief logbook_build_ostc3header_compact. / | |
| 1639 * @author heinrichs weikamp gmbh | |
| 1640 * @version V0.0.1 | |
| 1641 * @date 31-Juli-2015 | |
| 1642 *********************************************************************************/ | |
| 1643 SLogbookHeaderOSTC3compact * logbook_build_ostc3header_compact(SLogbookHeader* pHead) | |
| 1644 { | |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1645 uint8_t returnEmptyHeader = 0; |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1646 convert_Type data, data2; |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1647 uint32_t dummyLength = 0; |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1648 uint32_t headerProfileLength, sampleProfileLength, sampleProfileStart; |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1649 |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1650 if(pHead->diveHeaderStart != 0xFAFA) |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1651 { |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1652 returnEmptyHeader = 1; |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1653 } |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1654 else |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1655 { |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1656 data.u8bit.byteHigh = 0; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1657 data.u8bit.byteLow = pHead->pBeginProfileData[0]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1658 data.u8bit.byteMidLow = pHead->pBeginProfileData[1]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1659 data.u8bit.byteMidHigh = pHead->pBeginProfileData[2]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1660 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1661 sampleProfileStart = data.u32bit; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1662 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1663 data2.u8bit.byteHigh = 0; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1664 data2.u8bit.byteLow = pHead->pEndProfileData[0]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1665 data2.u8bit.byteMidLow = pHead->pEndProfileData[1]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1666 data2.u8bit.byteMidHigh = pHead->pEndProfileData[2]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1667 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1668 data.u8bit.byteHigh = 0; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1669 data.u8bit.byteLow = pHead->profileLength[0]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1670 data.u8bit.byteMidLow = pHead->profileLength[1]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1671 data.u8bit.byteMidHigh = pHead->profileLength[2]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1672 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1673 if(data.u32bit != 0xFFFFFF) |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1674 { |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1675 if(data2.u32bit < sampleProfileStart) /* Wrap around of sample ring detected */ |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1676 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1677 if(ext_flash_SampleOverrunValid() == 0) /* Wrap around does not seem to be valid => fallback */ |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1678 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1679 sampleProfileStart = 0; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1680 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1681 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1682 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1683 if( sampleProfileStart == 0) /* no sample data available => use dummy */ |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1684 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1685 sampleProfileLength = 1; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1686 headerProfileLength = 2; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1687 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1688 else |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1689 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1690 headerProfileLength = (pHead->profileLength[2] << 16) + (pHead->profileLength[1] << 8) + pHead->profileLength[0]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1691 sampleProfileLength = ext_flash_read_profilelength_small_header(sampleProfileStart); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1692 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1693 if(sampleProfileLength != headerProfileLength) |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1694 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1695 dummyLength = logbook_fillDummySampleBuffer(pHead); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1696 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1697 data2.u32bit = sampleProfileStart + dummyLength; /* calc new end address (which is equal to dummyLength) */ |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1698 data.u32bit = dummyLength; /* data is used below to represent the length */ |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1699 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1700 data.u32bit += 3; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1701 headerOSTC3compact.profileLength[0] = data.u8bit.byteLow; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1702 headerOSTC3compact.profileLength[1] = data.u8bit.byteMidLow; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1703 headerOSTC3compact.profileLength[2] = data.u8bit.byteMidHigh; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1704 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1705 headerOSTC3compact.dateYear = pHead->dateYear; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1706 headerOSTC3compact.dateMonth = pHead->dateMonth; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1707 headerOSTC3compact.dateDay = pHead->dateDay; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1708 headerOSTC3compact.timeHour = pHead->timeHour; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1709 headerOSTC3compact.timeMinute = pHead->timeMinute; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1710 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1711 memcpy(headerOSTC3compact.maxDepth, &pHead->maxDepth, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1712 memcpy(headerOSTC3compact.diveTimeMinutes, &pHead->diveTimeMinutes, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1713 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1714 headerOSTC3compact.diveTimeSeconds = pHead->diveTimeSeconds; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1715 headerOSTC3compact.totalDiveNumberLow = pHead->diveNumber & 0xFF; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1716 headerOSTC3compact.totalDiveNumberHigh = (uint8_t)(pHead->diveNumber/256); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1717 headerOSTC3compact.profileVersion = 0x24; // Logbook-Profile version, 0x24 = date and time is start not end |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1718 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1719 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1720 { |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1721 returnEmptyHeader = 1; |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1722 } |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1723 } |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1724 if(returnEmptyHeader) |
| 38 | 1725 { |
| 1726 memset(&headerOSTC3compact, 0xFF, sizeof(SLogbookHeaderOSTC3compact)); | |
| 1727 } | |
| 1728 return &headerOSTC3compact; | |
| 1729 } | |
| 1730 | |
| 1731 | |
| 1732 /** | |
| 1733 ****************************************************************************** | |
| 1734 * @brief logbook_readSampleData. / Reads sample data of whole logbook entry | |
| 281 | 1735 * @author heinrichs weikamp |
| 38 | 1736 * @version V0.0.1 |
| 1737 * @date 22-April-2014 | |
| 1738 ****************************************************************************** | |
| 1739 * | |
| 1740 * @param uint8_t StepBackwards: witch lookbook entry? | |
| 1741 * @param uint16_t length : maxlength of output arrays | |
| 1742 * @param int32_t* depth : output array | |
| 1743 * @param int16_t * gasid : output array | |
| 1744 * @param int32_t* temperature : output array | |
| 1745 * @param int32_t* ppo2 : output array | |
| 1746 * @param int32_t* cns : output array | |
| 1747 * @return length of output | |
| 1748 */ | |
| 1749 void logbook_recover_brokenlog(uint8_t headerId) | |
| 1750 { | |
| 1751 int16_t retVal; | |
| 1752 int32_t depthVal = 0; | |
| 1753 int16_t gasidVal = 0; | |
| 1754 int16_t setPointVal = 0; | |
| 1755 int16_t bailoutVal = 0; | |
| 1756 int32_t temperatureVal = 0; | |
| 1757 int32_t sensor1Val = 0; | |
| 1758 int32_t sensor2Val = 0; | |
| 1759 int32_t sensor3Val = 0; | |
| 1760 int32_t cnsVal = 0; | |
| 1761 SManualGas manualGasVal; | |
| 1762 | |
| 1763 //uint16_t* ppo2, uint16_t* cns# | |
| 1764 uint32_t bytesRead = 0; | |
| 1765 | |
| 1766 ext_flash_read_block_start(); | |
| 1767 ext_flash_read_next_sample_part((uint8_t*)&smallHeader, sizeof(SSmallHeader)); | |
| 1768 bytesRead += sizeof(SSmallHeader); | |
| 1769 | |
| 1770 clear_divisor(); | |
| 1771 | |
| 1772 | |
| 1773 int sampleCounter = 0; | |
| 1774 int maxdepth = 0; | |
| 1775 uint32_t avrdepth = 0; | |
| 1776 while (true) | |
| 1777 { | |
| 1778 | |
| 1779 ext_flash_set_entry_point(); | |
| 1780 divisorBackup = divisor; | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1781 retVal = readSample(&depthVal,&gasidVal, &setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, NULL, NULL); |
| 38 | 1782 if(retVal == 0) |
| 1783 { | |
| 1784 //Error try to read again!!! | |
| 1785 ext_flash_reopen_read_sample_at_entry_point(); | |
| 1786 divisor = divisorBackup; | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1787 retVal = readSample(&depthVal,&gasidVal, &setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, NULL, NULL); |
| 38 | 1788 |
| 1789 if(retVal == 0) | |
| 1790 { | |
| 1791 //Error try to read again!!! | |
| 1792 ext_flash_reopen_read_sample_at_entry_point(); | |
| 1793 divisor = divisorBackup; | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1794 retVal = readSample(&depthVal,&gasidVal, &setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, NULL, NULL); |
| 38 | 1795 |
| 1796 if(retVal == 0) | |
| 1797 { | |
| 1798 ext_flash_reopen_read_sample_at_entry_point(); | |
| 1799 break; | |
| 1800 } | |
| 1801 | |
| 1802 } | |
| 1803 } | |
| 1804 if(depthVal > maxdepth) | |
| 1805 maxdepth = depthVal; | |
| 1806 avrdepth += depthVal; | |
| 1807 sampleCounter++; | |
| 1808 bytesRead +=retVal; | |
| 1809 } | |
| 1810 avrdepth/= sampleCounter; | |
| 1811 ext_flash_close_read_sample(); | |
| 1812 SLogbookHeader header; | |
| 1813 | |
| 1814 ext_flash_read_dive_header2((uint8_t*) &header, headerId, false); | |
| 1815 header.total_diveTime_seconds = sampleCounter * header.samplingRate; | |
| 1816 header.diveTimeMinutes = header.total_diveTime_seconds /60; | |
| 1817 header.diveTimeSeconds = header.total_diveTime_seconds - header.diveTimeMinutes * 60; | |
| 1818 header.maxDepth = maxdepth; | |
| 1819 header.averageDepth_mbar = avrdepth; | |
| 1820 SSettings * settings = settingsGetPointer(); | |
| 1821 settings->lastDiveLogId = headerId; | |
| 1822 ext_flash_close_new_dive_log((uint8_t *)&header); | |
| 1823 } | |
| 1824 | |
| 458 | 1825 void logbook_createDummyProfile(SLogbookHeader* pHeader, uint16_t length, uint16_t* depth, int16_t* temperature, uint16_t* ppo2) |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1826 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1827 uint8_t drawDeco = 1; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1828 uint16_t index = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1829 uint16_t indexDescenStop = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1830 uint16_t indexAscendStart = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1831 uint16_t simDecentDepth = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1832 uint16_t simDecentStep = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1833 uint16_t simAcentDepth = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1834 uint16_t simAcentStep = 0; |
| 458 | 1835 float ambiant_pressure_bar = 0; |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1836 |
| 458 | 1837 simDecentStep = pHeader->maxDepth / (length / 6); /* first 1/6 for descend */ |
| 1838 simAcentStep = pHeader->maxDepth / (length / 3); /* first 1/3 for ascend */ | |
| 1839 | |
| 1840 SGas gas; | |
| 1841 | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1842 |
| 458 | 1843 if(ppo2) |
| 1844 { | |
| 1845 /* find first gas ID */ | |
|
524
b33a8c1c72e5
Minor: Removed duplicated definition of number of available gases
Ideenmodellierer
parents:
483
diff
changeset
|
1846 for(index = 0; index < NUM_GASES; index++) |
| 458 | 1847 { |
| 1848 if(pHeader->gasordil[index].note.ub.first) | |
| 1849 break; | |
| 1850 } | |
|
524
b33a8c1c72e5
Minor: Removed duplicated definition of number of available gases
Ideenmodellierer
parents:
483
diff
changeset
|
1851 if(index != NUM_GASES) |
| 458 | 1852 { |
| 1853 gas.helium_percentage = pHeader->gasordil[index].helium_percentage; | |
| 1854 gas.nitrogen_percentage = 100 - gas.helium_percentage - pHeader->gasordil[index].oxygen_percentage; | |
| 1855 } | |
| 1856 } | |
| 1857 | |
| 1858 while((index < length) && (simDecentDepth < pHeader->maxDepth)) /* draw decent */ | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1859 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1860 depth[index] = simDecentDepth; |
| 458 | 1861 temperature[index] = pHeader->minTemp; |
| 1862 if(ppo2) | |
| 1863 { | |
| 1864 ambiant_pressure_bar =((float)(depth[index] + pHeader->surfacePressure_mbar))/1000; | |
| 1865 ppo2[index] = (uint16_t) ((decom_calc_ppO2(ambiant_pressure_bar, &gas )) * 100); | |
| 1866 } | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1867 index++; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1868 simDecentDepth += simDecentStep; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1869 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1870 indexDescenStop = index; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1871 index = length -1; |
| 458 | 1872 while((index > indexDescenStop) && (simAcentDepth < pHeader->maxDepth)) /* draw ascend including max deco stop */ |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1873 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1874 depth[index] = simAcentDepth; |
| 458 | 1875 temperature[index] = pHeader->minTemp; |
| 1876 if(ppo2) | |
| 1877 { | |
| 1878 ambiant_pressure_bar =((float)(depth[index] + pHeader->surfacePressure_mbar))/1000; | |
| 1879 ppo2[index] = (uint16_t) ((decom_calc_ppO2(ambiant_pressure_bar, &gas )) * 100); | |
| 1880 } | |
| 1881 if((drawDeco) && (simAcentDepth < pHeader->lastDecostop_m)) /* draw deco step */ | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1882 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1883 drawDeco = length / 10; |
| 458 | 1884 while(drawDeco) |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1885 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1886 index--; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1887 depth[index] = simAcentDepth; |
| 458 | 1888 temperature[index] = pHeader->minTemp; |
| 1889 if(ppo2) | |
| 1890 { | |
| 1891 ambiant_pressure_bar =((float)(depth[index] + pHeader->surfacePressure_mbar))/1000; | |
| 1892 ppo2[index] = (uint16_t) ((decom_calc_ppO2(ambiant_pressure_bar, &gas )) * 100); | |
| 1893 } | |
| 1894 drawDeco--; | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1895 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1896 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1897 index--; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1898 simAcentDepth += simAcentStep; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1899 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1900 indexAscendStart = index; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1901 index = indexDescenStop; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1902 while(index <= indexAscendStart) /* draw isobar dive phase */ |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1903 { |
| 458 | 1904 depth[index] = pHeader->maxDepth; |
| 1905 temperature[index] = pHeader->minTemp; | |
| 1906 if(ppo2) | |
| 1907 { | |
| 1908 ambiant_pressure_bar =((float)(depth[index] + pHeader->surfacePressure_mbar))/1000; | |
| 1909 ppo2[index] = (uint16_t) ((decom_calc_ppO2(ambiant_pressure_bar, &gas )) * 100); | |
| 1910 } | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1911 index++; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1912 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1913 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1914 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1915 void logbook_resetDummy() |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1916 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1917 dummyWriteIdx = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1918 dummyReadIdx = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1919 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1920 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1921 void logbook_writeDummy(void* data, uint16_t length) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1922 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1923 memcpy(&dummyMemoryBuffer[dummyWriteIdx],(uint8_t *)data, length); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1924 dummyWriteIdx += length; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1925 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1926 void logbook_writeDummySample(uint16_t depth, int16_t temperature) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1927 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1928 uint8_t sample[10]; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1929 int length = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1930 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1931 int i = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1932 for(i = 0; i <10 ;i++) sample[i] = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1933 addU16(sample, depth); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1934 length += 2; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1935 sample[2] = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1936 length++; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1937 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1938 if(divisor.temperature == 0) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1939 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1940 divisor.temperature = smallHeader.tempDivisor - 1; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1941 addS16(&sample[length], temperature); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1942 length += 2; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1943 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1944 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1945 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1946 divisor.temperature--; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1947 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1948 |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1949 logbook_writeDummy((void *) sample,length); |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1950 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1951 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1952 |
| 458 | 1953 uint16_t logbook_fillDummySampleBuffer(SLogbookHeader* pHeader) |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1954 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1955 uint16_t depthArray[DUMMY_SAMPLES]; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1956 int16_t temperatureArray[DUMMY_SAMPLES]; |
| 458 | 1957 uint16_t ppo2Array[DUMMY_SAMPLES]; |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1958 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1959 uint16_t index = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1960 uint16_t dummyBufferSize = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1961 uint16_t dummyProfileLength = 0; |
| 458 | 1962 uint32_t overallSecond = pHeader->diveTimeMinutes * 60 + pHeader->diveTimeSeconds; |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1963 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1964 logbook_resetDummy(); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1965 clear_divisor(); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1966 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1967 smallDummyHeader.profileLength[0] = 0xFF; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1968 smallDummyHeader.profileLength[1] = 0xFF; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1969 smallDummyHeader.profileLength[2] = 0xFF; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1970 smallDummyHeader.samplingRate_seconds = 2; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1971 smallDummyHeader.numDivisors = 7; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1972 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1973 smallDummyHeader.tempType = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1974 smallDummyHeader.tempLength = 2; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1975 smallDummyHeader.tempDivisor = 6; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1976 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1977 smallDummyHeader.deco_ndlType = 1; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1978 smallDummyHeader.deco_ndlLength = 2; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1979 smallDummyHeader.deco_ndlDivisor = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1980 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1981 /* GF in % at actual position */ |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1982 smallDummyHeader.gfType = 2; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1983 smallDummyHeader.gfLength = 1; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1984 smallDummyHeader.gfDivisor = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1985 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1986 /* 3 Sensors: 8bit ppO2 in 0.01bar, 16bit voltage in 0,1mV */ |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1987 smallDummyHeader.ppo2Type = 3; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1988 smallDummyHeader.ppo2Length = 9; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1989 smallDummyHeader.ppo2Divisor = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1990 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1991 /* last 15 stops in minutes (last, second_to_last, ... */ |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1992 /* last stop depth is defined in header */ |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1993 smallDummyHeader.decoplanType = 4; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1994 smallDummyHeader.decoplanLength = 15; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1995 smallDummyHeader.decoplanDivisor = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1996 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1997 smallDummyHeader.cnsType = 5; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1998 smallDummyHeader.cnsLength = 2; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1999 smallDummyHeader.cnsDivisor = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2000 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2001 smallDummyHeader.tankType = 6; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2002 smallDummyHeader.tankLength = 2; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2003 smallDummyHeader.tankDivisor = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2004 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2005 if((overallSecond / smallDummyHeader.samplingRate_seconds) > DUMMY_SAMPLES) /* reduce sample interval to keep buffer size */ |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2006 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2007 smallDummyHeader.samplingRate_seconds = overallSecond / DUMMY_SAMPLES; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2008 dummyProfileLength = DUMMY_SAMPLES; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2009 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2010 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2011 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2012 dummyProfileLength = overallSecond / smallDummyHeader.samplingRate_seconds; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2013 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2014 logbook_writeDummy((void *) &smallDummyHeader,sizeof(smallDummyHeader)); |
| 458 | 2015 logbook_createDummyProfile(pHeader,dummyProfileLength, depthArray, temperatureArray, ppo2Array ); |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2016 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2017 for (index = 0; index < dummyProfileLength; index++) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2018 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2019 logbook_writeDummySample(depthArray[index], temperatureArray[index]); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2020 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2021 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2022 dummyBufferSize = dummyWriteIdx; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2023 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2024 return dummyBufferSize; /* return size of dummy buffer */ |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2025 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2026 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2027 void logbook_readDummySamples(uint8_t* pTarget, uint16_t length) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2028 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2029 memcpy(pTarget,&dummyMemoryBuffer[dummyReadIdx],length); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2030 dummyReadIdx += length; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2031 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2032 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2033 |
| 38 | 2034 /************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/ |