Mercurial > public > ostc4
annotate Discovery/Src/logbook.c @ 281:54d14bc2083c
Fix typos (There are still many...)
Limit stored NDL within 0 to 240 mins (Since it's 8bit UINT only) - I asume this is was a bug causing bad NDL readings in the logbook when downloaded with libdivecomputer
| author | heinrichsweikamp |
|---|---|
| date | Wed, 01 May 2019 14:39:46 +0200 |
| parents | 2e58a4094770 |
| children | 04cdeff80254 |
| rev | line source |
|---|---|
| 38 | 1 /** |
| 2 ****************************************************************************** | |
| 3 * @copyright heinrichs weikamp | |
| 4 * @file logbook.c | |
| 5 * @author heinrichs weikamp gmbh and heinrichs weikamp gmbh | |
| 6 * @date 22-Apr-2014 | |
| 7 * @version V0.0.3 | |
| 8 * @since 03-Feb-2016 | |
| 9 * @brief Everything about creating and evaluating the logbook | |
| 10 * without the flash part which is included in externLogbookFlash.c | |
| 11 * and the USB/Bluetooth part in tComm.c | |
| 12 * CHANGE V0.0.3 hw: ppO2 sensor values | |
| 13 * CHANGE V0.0.4 hw: fix event bytes according to hwos_interface.odt dated 160610 in bitbucket hwOS | |
| 14 * @bug | |
| 15 * @warning | |
| 16 @verbatim | |
| 17 ============================================================================== | |
| 18 ##### Header ##### | |
| 19 ============================================================================== | |
| 20 [..] SLogbookHeader | |
| 21 The order has changed in comparsion to OSTC3 for perfect alignment | |
| 22 with 16bit and 32bit. The header is 256kB as well. | |
| 23 DO NOT rearrange anything but add new data to a second page | |
| 24 beyond diveHeaderEnd. Use extraPagesWithData to indicate that there is | |
| 25 data available that was not available in the OSTC3 256KB | |
| 26 This data will be behind the diveHeaderEnd. DO NOT delete diveHeaderEnd. | |
| 27 | |
| 28 [..] SLogbookHeaderOSTC3 | |
| 29 is the format used by the OSTC3. | |
| 30 logbook_getHeaderOSTC3() does the job using the global headers in logbook.c | |
| 31 | |
| 32 [..] SSmallHeader | |
| 33 - is the format used by the OSTC3 | |
| 34 | |
| 35 [..] Summary | |
| 36 The header format is not perfect and might be optimized prior to | |
| 37 releasing the diving computer. For now it is good to be compatible | |
| 38 with PC software available for checking the content of the logbook | |
| 39 | |
| 40 | |
| 41 @endverbatim | |
| 42 ****************************************************************************** | |
| 43 * @attention | |
| 44 * | |
| 45 * <h2><center>© COPYRIGHT(c) 2014 heinrichs weikamp</center></h2> | |
| 46 * | |
| 47 ****************************************************************************** | |
| 48 */ | |
| 49 | |
| 50 /* Includes ------------------------------------------------------------------*/ | |
| 51 #include <stdint.h> | |
| 52 #include <string.h> | |
| 53 #include "logbook.h" | |
| 54 //#include "test_vpm.h" | |
| 55 #include "externLogbookFlash.h" | |
| 56 #include "data_exchange.h" | |
| 57 #include "decom.h" | |
| 58 #include "tHome.h" // for tHome_findNextStop() | |
| 59 | |
| 60 /* Private types -------------------------------------------------------------*/ | |
| 61 | |
| 62 #define NUM_GASES 5 | |
| 63 | |
| 64 #define LOGBOOK_VERSION (0x30) | |
| 65 #define LOGBOOK_VERSION_OSTC3 (0x24) | |
| 66 | |
| 67 typedef struct /* don't forget to adjust void clear_divisor(void) */ | |
| 68 { | |
| 69 uint8_t temperature; | |
| 70 uint8_t deco_ndl; | |
| 71 uint8_t gradientFactor; | |
| 72 uint8_t ppo2; | |
| 73 uint8_t decoplan; | |
| 74 uint8_t cns; | |
| 75 uint8_t tank; | |
| 76 } SDivisor; | |
| 77 | |
| 78 /* Exported variables --------------------------------------------------------*/ | |
| 79 | |
| 80 /* Private variables ---------------------------------------------------------*/ | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
81 static SLogbookHeader header; |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
82 static SLogbookHeaderOSTC3 headerOSTC3; |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
83 static SLogbookHeaderOSTC3compact headerOSTC3compact; |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
84 static SSmallHeader smallHeader; |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
85 static SDivisor divisor; |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
86 static SDivisor divisorBackup; |
| 38 | 87 |
| 88 /* Private function prototypes -----------------------------------------------*/ | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
89 static void clear_divisor(void); |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
90 static void logbook_SetAverageDepth(float average_depth_meter); |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
91 static void logbook_SetMinTemperature(float min_temperature_celsius); |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
92 static void logbook_SetMaxCNS(float max_cns_percentage); |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
93 static void logbook_SetCompartmentDesaturation(const SDiveState * pStateReal); |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
94 static void logbook_SetLastStop(float last_stop_depth_bar); |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
95 static void logbook_writedata(void * data, int length_byte); |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
96 static void logbook_UpdateHeader(const SDiveState * pStateReal); |
| 38 | 97 |
| 98 /* Exported functions --------------------------------------------------------*/ | |
| 99 | |
| 100 void logbook_EndDive(void) | |
| 101 { | |
| 102 ext_flash_close_new_dive_log((uint8_t*) &header); | |
| 103 } | |
| 104 | |
| 105 | |
| 106 // =============================================================================== | |
| 107 // logbook_last_totalDiveCount | |
| 108 /// @brief Fix setting issues | |
| 109 /// @date 04-April-2016 | |
| 110 /// | |
| 111 /// @return diveNumber (totalDiveCounter) of latest log entry, 0 if not a valid header | |
| 112 // =============================================================================== | |
| 113 uint16_t logbook_lastDive_diveNumber(void) | |
| 114 { | |
| 115 SLogbookHeader tempLogbookHeader; | |
| 116 if(logbook_getHeader(0, &tempLogbookHeader)) | |
| 117 { | |
| 118 return tempLogbookHeader.diveNumber; | |
| 119 } | |
| 120 else | |
| 121 { | |
| 122 return 0; | |
| 123 } | |
| 124 } | |
| 125 | |
| 126 | |
| 127 /** | |
| 128 ****************************************************************************** | |
| 129 * @brief logbook_getCurrentHeader. / | |
| 281 | 130 * @author heinrichs weikamp |
| 38 | 131 * @version V0.0.1 |
| 132 * @date 22-April-2014 | |
| 133 ****************************************************************************** | |
| 134 * | |
| 135 * @return SLogbookHeader*: | |
| 136 */ | |
| 137 SLogbookHeader* logbook_getCurrentHeader(void) | |
| 138 { | |
| 139 return &header; | |
| 140 } | |
| 141 | |
| 142 /** | |
| 143 ****************************************************************************** | |
| 144 * @brief logbook_getNumberOfHeaders. / | |
| 145 * @author heinrichs weikamp gmbh | |
| 146 * @version V0.0.1 | |
| 147 * @date 18-May-2016 | |
| 148 ****************************************************************************** | |
| 149 * | |
| 150 * @return uint8_t : number of valid headers (0xFAFA) found. | |
| 151 */ | |
| 152 uint8_t logbook_getNumberOfHeaders(void) | |
| 153 { | |
| 154 return ext_flash_count_dive_headers(); | |
| 155 } | |
| 156 | |
| 157 | |
| 158 /** | |
| 159 ****************************************************************************** | |
| 160 * @brief logbook_getHeader. / | |
| 281 | 161 * @author heinrichs weikamp |
| 38 | 162 * @version V0.0.1 |
| 163 * @date 22-April-2014 | |
| 164 ****************************************************************************** | |
| 165 * | |
| 166 * @param StepBackwards : 0 Last lokbook entry, 1 second to last entry, etc. | |
| 167 * @param SSLogbookHeader* pLogbookHeader: Output found LogbookHeader | |
| 168 * @return uint8_t : 1 = success | |
| 169 */ | |
| 170 uint8_t logbook_getHeader(uint8_t StepBackwards,SLogbookHeader* pLogbookHeader) | |
| 171 { | |
| 172 ext_flash_read_dive_header((uint8_t *)pLogbookHeader, StepBackwards); | |
| 173 if(pLogbookHeader->diveHeaderStart != 0xFAFA) | |
| 174 return 0; | |
| 175 else | |
| 176 return 1; | |
| 177 } | |
| 178 | |
| 179 /** | |
| 180 ****************************************************************************** | |
| 181 * @brief logbook_initNewdiveProfile. / | |
| 182 * creates header and smallHeader from diveState and global Settings | |
| 183 * and writes new lookboock entry on flash device | |
| 184 * diveState | |
| 281 | 185 * @author heinrichs weikamp |
| 38 | 186 * @version V0.0.1 |
| 187 * @date 22-April-2014 | |
| 188 ****************************************************************************** | |
| 189 * | |
| 190 * @param SDiveState* pInfo: Input | |
| 191 * @param SSettings* pSettings: Input | |
| 192 */ | |
| 193 | |
| 194 void logbook_initNewdiveProfile(const SDiveState* pInfo, SSettings* pSettings) | |
| 195 { | |
| 196 RTC_DateTypeDef Sdate; | |
| 197 RTC_TimeTypeDef Stime; | |
| 198 | |
| 199 for(int i = 0; i < sizeof(SLogbookHeader); i++) | |
| 200 { | |
| 201 ((uint8_t*)(&header))[i] = 0; | |
| 202 } | |
| 203 header.diveHeaderStart = 0xFAFA; | |
| 204 header.diveHeaderEnd = 0xFBFB; | |
| 205 header.samplingRate = 2; | |
| 206 if(pInfo->diveSettings.diveMode == DIVEMODE_OC) | |
| 207 { | |
| 208 for(int i = 0; i < 5; i++) | |
| 209 { | |
| 210 header.gasordil[i].oxygen_percentage = pSettings->gas[i+1].oxygen_percentage; | |
| 211 header.gasordil[i].helium_percentage = pSettings->gas[i+1].helium_percentage; | |
| 212 header.gasordil[i].note.uw = pSettings->gas[i+1].note.uw; | |
| 213 header.gasordil[i].depth_meter = pSettings->gas[i+1].depth_meter; | |
| 214 } | |
| 215 } | |
| 216 else | |
| 217 { | |
| 218 for(int i = 0; i < 5; i++) | |
| 219 { | |
| 220 header.gasordil[i].oxygen_percentage = pSettings->gas[i+6].oxygen_percentage; | |
| 221 header.gasordil[i].helium_percentage = pSettings->gas[i+6].helium_percentage; | |
| 222 header.gasordil[i].note.uw = pSettings->gas[i+6].note.uw; | |
| 223 header.gasordil[i].depth_meter = pSettings->gas[i+6].depth_meter; | |
| 224 } | |
| 225 | |
| 226 for(int i = 0; i < 5; i++) | |
| 227 { | |
| 228 header.setpoint[i].setpoint_cbar = pSettings->setpoint[i+1].setpoint_cbar; | |
| 229 header.setpoint[i].depth_meter = pSettings->setpoint[i+1].depth_meter; | |
| 230 } | |
| 231 } | |
| 232 // header.gasordil[pInfo->lifeData.actualGas.GasIdInSettings].depth_meter = 0; | |
| 233 | |
| 234 translateDate(pInfo->lifeData.dateBinaryFormat, &Sdate); | |
| 235 translateTime(pInfo->lifeData.timeBinaryFormat, &Stime); | |
| 236 header.dateYear = Sdate.Year; | |
| 237 header.dateMonth = Sdate.Month; | |
| 238 header.dateDay = Sdate.Date; | |
| 239 header.timeHour = Stime.Hours; | |
| 240 header.timeMinute = Stime.Minutes; | |
|
199
ac58a9fb92ac
Bugfix: fix initial CNS data in the logbook header
Jan Mulder <jlmulder@xs4all.nl>
parents:
194
diff
changeset
|
241 header.cnsAtBeginning = (uint16_t)pInfo->lifeData.cns; |
| 38 | 242 header.surfacePressure_mbar = (uint16_t)(pInfo->lifeData.pressure_surface_bar * 1000); |
| 243 header.firmwareVersionHigh = firmwareVersion_16bit_high(); | |
| 244 header.firmwareVersionLow = firmwareVersion_16bit_low(); | |
| 245 header.logbookProfileVersion = LOGBOOK_VERSION; | |
| 246 header.salinity = pSettings->salinity; | |
| 247 header.diveNumber = pSettings->totalDiveCounter; | |
| 248 header.personalDiveCount = pSettings->personalDiveCount; | |
| 249 | |
| 250 header.diveMode = pInfo->diveSettings.diveMode; | |
| 251 header.CCRmode = pInfo->diveSettings.CCR_Mode; | |
| 252 header.lastDecostop_m = pSettings->last_stop_depth_meter; | |
| 253 | |
| 254 if(pInfo->diveSettings.deco_type.ub.standard == GF_MODE) | |
| 255 { | |
| 256 header.decoModel = 1; | |
| 257 header.gfLow_or_Vpm_conservatism = pInfo->diveSettings.gf_low; | |
| 258 header.gfHigh = pInfo->diveSettings.gf_high; | |
| 259 } | |
| 260 else | |
| 261 { | |
| 262 header.decoModel = 2; | |
| 263 header.gfLow_or_Vpm_conservatism = pInfo->diveSettings.vpm_conservatism; | |
| 264 header.gfHigh = 0; | |
| 265 } | |
| 266 | |
| 267 memcpy(header.n2Compartments, pInfo->lifeData.tissue_nitrogen_bar, 64); | |
| 268 memcpy(header.heCompartments, pInfo->lifeData.tissue_helium_bar, 64); | |
| 269 | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
270 logbook_SetCompartmentDesaturation(pInfo); |
| 38 | 271 |
| 272 ext_flash_start_new_dive_log_and_set_actualPointerSample((uint8_t*)&header); | |
| 273 | |
| 274 smallHeader.profileLength[0] = 0xFF; | |
| 275 smallHeader.profileLength[1] = 0xFF; | |
| 276 smallHeader.profileLength[2] = 0xFF; | |
| 277 smallHeader.samplingRate_seconds = 2; | |
| 278 smallHeader.numDivisors = 7; | |
| 279 | |
| 280 smallHeader.tempType = 0; | |
| 281 smallHeader.tempLength = 2; | |
| 282 smallHeader.tempDivisor = 6; | |
| 283 | |
| 284 smallHeader.deco_ndlType = 1; | |
| 285 smallHeader.deco_ndlLength = 2; | |
| 286 smallHeader.deco_ndlDivisor = 6; //= 6; | |
| 287 | |
| 288 /* GF in % at actual position */ | |
| 289 smallHeader.gfType = 2; | |
| 290 smallHeader.gfLength = 1; | |
| 291 smallHeader.gfDivisor = 0; //12; | |
| 292 | |
| 293 /* 3 Sensors: 8bit ppO2 in 0.01bar, 16bit voltage in 0,1mV */ | |
| 294 smallHeader.ppo2Type = 3; | |
| 295 smallHeader.ppo2Length = 9; | |
| 296 smallHeader.ppo2Divisor = 2; //2 | |
| 297 | |
| 298 /* last 15 stops in minutes (last, second_to_last, ... */ | |
| 299 /* last stop depth is defined in header */ | |
| 300 smallHeader.decoplanType = 4; | |
| 301 smallHeader.decoplanLength = 15; | |
| 302 smallHeader.decoplanDivisor = 12;//12; | |
| 303 | |
| 304 smallHeader.cnsType = 5; | |
| 305 smallHeader.cnsLength = 2; | |
| 306 smallHeader.cnsDivisor = 12; | |
| 307 | |
| 308 smallHeader.tankType = 6; | |
| 309 smallHeader.tankLength = 0; | |
| 310 smallHeader.tankDivisor = 0; | |
| 311 | |
| 312 logbook_writedata((void *) &smallHeader,sizeof(smallHeader)); | |
| 313 | |
| 314 clear_divisor(); | |
| 315 } | |
| 316 | |
| 317 /** | |
| 318 ****************************************************************************** | |
| 319 * @brief clear_divisor / clears divisor struct | |
| 281 | 320 * @author heinrichs weikamp |
| 38 | 321 * @version V0.0.1 |
| 322 * @date 22-April-2014 | |
| 323 ****************************************************************************** | |
| 324 * | |
| 325 */ | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
326 static void clear_divisor(void) |
| 38 | 327 { |
| 328 divisor.cns = smallHeader.cnsDivisor - 1; | |
| 329 divisor.decoplan = smallHeader.decoplanDivisor - 1; | |
| 330 divisor.deco_ndl = smallHeader.deco_ndlDivisor - 1; | |
| 331 divisor.gradientFactor = smallHeader.gfDivisor -1 ; | |
| 332 divisor.ppo2 = smallHeader.ppo2Divisor - 1; | |
| 333 divisor.tank = smallHeader.tankDivisor - 1; | |
| 334 divisor.temperature = smallHeader.tempDivisor - 1; | |
| 335 } | |
| 336 | |
| 337 | |
| 338 /** | |
| 339 ****************************************************************************** | |
| 340 * @brief add16. / adds 16 bit variable to 8 bit array | |
| 281 | 341 * @author heinrichs weikamp |
| 38 | 342 * @version V0.0.1 |
| 343 * @date 22-April-2014 | |
| 344 ****************************************************************************** | |
| 345 * | |
| 346 * @param uint8_t *pos: Output 8 bit array | |
| 347 * @param uint16_t var: 16 bit variable | |
| 348 */ | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
349 static void addU16(uint8_t *pos, uint16_t var) |
| 38 | 350 { |
| 351 *((uint16_t*)pos) = var; | |
| 352 } | |
| 353 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
354 static void addS16(uint8_t *pos, int16_t var) |
| 38 | 355 { |
| 356 *((int16_t*)pos) = var; | |
| 357 } | |
| 358 | |
| 359 /** | |
| 360 ****************************************************************************** | |
| 361 * @brief logbook_writeSample. / Writes one logbook sampl | |
| 281 | 362 * @author heinrichs weikamp |
| 38 | 363 * @date 22-April-2014 |
| 364 * @version V0.0.2 | |
| 365 * @since 20-June-2016 | |
| 366 * @bug Deco/NDL Status fixed in V0.0.2 | |
| 367 | |
| 368 | |
| 369 ****************************************************************************** | |
| 370 * | |
| 371 * @param SDiveState state: | |
| 372 */ | |
| 373 | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
374 void logbook_writeSample(const SDiveState *state) |
| 38 | 375 { |
| 376 uint8_t sample[256]; | |
| 377 // int position = 0; | |
| 378 int length = 0; | |
| 379 // _Bool bEvent = 0; | |
| 380 uint8_t nextstopDepthMeter = 0; | |
| 381 uint16_t nextstopLengthSeconds = 0; | |
| 382 uint8_t nextstopLengthMinutes = 0; | |
| 383 bit8_Type eventByte1, eventByte2; | |
| 384 bit8_Type profileByteFlag; | |
| 385 int i = 0; | |
| 386 for(i = 0; i <256 ;i++) | |
| 387 sample[i] = 0; | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
388 addU16(sample, (uint16_t)(state->lifeData.depth_meter * 100)); |
| 38 | 389 length += 2; |
| 390 sample[2] = 0; | |
| 391 length++; | |
| 392 eventByte1.uw = 0; | |
| 393 eventByte2.uw = 0; | |
| 394 //uint16_t tmpU16 = 0; | |
|
130
b7689d9e888a
Minor changes to improved code quality and to eliminate warnings
Ideenmodellierer
parents:
38
diff
changeset
|
395 const SDecoinfo * pDecoinfo; // new hw 160620 |
| 38 | 396 |
| 397 //BuildEevntyte 1 | |
| 398 // sub old 0-3 only one at a time | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
399 if(state->events.manualMarker) |
| 38 | 400 { |
| 401 eventByte1.uw = 6; | |
| 402 } | |
| 403 else | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
404 if(state->warnings.decoMissed) |
| 38 | 405 { |
| 406 eventByte1.uw = 2; | |
| 407 } | |
| 408 else | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
409 if(state->warnings.ppO2Low) |
| 38 | 410 { |
| 411 eventByte1.uw = 4; | |
| 412 } | |
| 413 else | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
414 if(state->warnings.ppO2High) |
| 38 | 415 { |
| 416 eventByte1.uw = 5; | |
| 417 } | |
| 418 else | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
419 if(state->warnings.lowBattery) |
| 38 | 420 { |
| 421 eventByte1.uw = 7; | |
| 422 } | |
| 423 else | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
424 if(state->warnings.slowWarning) |
| 38 | 425 { |
| 426 eventByte1.uw = 1; | |
| 427 } | |
| 428 // sub bit 4 to 7 | |
| 281 | 429 if(state->events.manualGasSet) |
| 38 | 430 { |
| 431 eventByte1.ub.bit4 = 1; | |
| 432 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
433 if(state->events.gasChange) |
| 38 | 434 { |
| 435 eventByte1.ub.bit5 = 1; | |
| 436 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
437 if(state->events.setpointChange) |
| 38 | 438 { |
| 439 eventByte1.ub.bit6 = 1; | |
| 440 } | |
| 441 // sub bit 7 + eventbyte2 | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
442 if(state->events.bailout) |
| 38 | 443 { |
| 444 eventByte1.ub.bit7 = 1; | |
| 445 eventByte2.ub.bit0 = 1; | |
| 446 } | |
| 447 //Add EventByte 1 | |
| 448 if(eventByte1.uw > 0) | |
| 449 { | |
| 450 sample[length] = eventByte1.uw; | |
| 451 length++; | |
| 452 } | |
| 453 if(eventByte2.uw > 0) | |
| 454 { | |
| 455 sample[length] = eventByte2.uw; | |
| 456 length++; | |
| 457 } | |
| 458 //Add EventInfos | |
| 281 | 459 if(state->events.manualGasSet) |
| 38 | 460 { |
| 461 //manual gas in %O2 & %He | |
| 281 | 462 sample[length] = state->events.info_manualGasSetO2; |
| 38 | 463 length += 1; |
| 281 | 464 sample[length] = state->events.info_manualGasSetHe; |
| 38 | 465 length += 1; |
| 466 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
467 if(state->events.gasChange) |
| 38 | 468 { |
| 469 //Current gas (gasid) | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
470 sample[length] = state->events.info_GasChange; |
| 38 | 471 length += 1; |
| 472 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
473 if(state->events.setpointChange) |
| 38 | 474 { |
| 475 //New setpoint in cbar | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
476 sample[length] = state->events.info_SetpointChange; |
| 38 | 477 length += 1; |
| 478 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
479 if(state->events.bailout) |
| 38 | 480 { |
| 481 //bailout gas in % O2 & %He | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
482 sample[length] = state->events.info_bailoutO2; |
| 38 | 483 length += 1; |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
484 sample[length] = state->events.info_bailoutHe; |
| 38 | 485 length += 1; |
| 486 } | |
| 487 | |
| 488 | |
| 489 if(divisor.temperature == 0) | |
| 490 { | |
| 491 divisor.temperature = smallHeader.tempDivisor - 1; | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
492 addS16(&sample[length], (int16_t)((state->lifeData.temperature_celsius * 10.0f) + 0.5f)); |
| 38 | 493 length += 2; |
| 494 } | |
| 495 else | |
| 496 { | |
| 497 divisor.temperature--; | |
| 498 } | |
| 499 | |
| 500 | |
| 501 if(smallHeader.deco_ndlDivisor > 0) | |
| 502 { | |
| 503 if(divisor.deco_ndl == 0) | |
| 504 { | |
| 505 divisor.deco_ndl = smallHeader.deco_ndlDivisor - 1; | |
| 506 | |
| 507 if(stateUsed->diveSettings.deco_type.ub.standard == GF_MODE) | |
| 508 pDecoinfo = &stateUsed->decolistBuehlmann; | |
| 509 else if(stateUsed->diveSettings.deco_type.ub.standard == VPM_MODE) | |
| 510 pDecoinfo = &stateUsed->decolistVPM; | |
| 511 else // should not happen as only GF and VPM at the moment | |
| 512 { | |
| 513 sample[length] = 0; | |
| 514 length += 1; | |
| 515 sample[length] = 0; | |
| 516 length += 1; | |
| 517 } | |
| 518 | |
| 519 if(pDecoinfo->output_ndl_seconds > 0) | |
| 520 { | |
| 521 sample[length] = 0; | |
| 522 length += 1; | |
| 523 sample[length] = (uint8_t)pDecoinfo->output_ndl_seconds / 60; | |
| 281 | 524 |
| 525 // Limit stored sample within 0 to 240 mins (Since it's 8bit UINT only) | |
| 526 if ((pDecoinfo->output_ndl_seconds / 60) > 240) sample[length] = 240; | |
| 527 if ((pDecoinfo->output_ndl_seconds / 60) < 0) sample[length] = 0; | |
| 528 | |
| 38 | 529 length += 1; |
| 530 } | |
| 531 else if(pDecoinfo->output_time_to_surface_seconds) | |
| 532 { | |
| 533 tHome_findNextStop(pDecoinfo->output_stop_length_seconds, &nextstopDepthMeter, &nextstopLengthSeconds); | |
| 534 nextstopLengthMinutes = (nextstopLengthSeconds +59 ) / 60; | |
| 535 | |
| 536 sample[length] = nextstopDepthMeter; | |
| 537 length += 1; | |
| 538 sample[length] = nextstopLengthMinutes; | |
| 539 length += 1; | |
| 540 } | |
| 541 else | |
| 542 { | |
| 543 sample[length] = 0; | |
| 544 length += 1; | |
| 545 sample[length] = 0; | |
| 546 length += 1; | |
| 547 } | |
| 548 } | |
| 549 else | |
| 550 { | |
| 551 divisor.deco_ndl --; | |
| 552 } | |
| 553 } | |
| 554 | |
| 555 | |
| 556 if(smallHeader.ppo2Divisor) | |
| 557 { | |
| 558 if(divisor.ppo2 == 0) | |
| 559 { | |
| 560 divisor.ppo2 = smallHeader.ppo2Divisor - 1; | |
| 561 | |
| 562 for(int i = 0; i <3; i++) | |
| 563 { | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
564 sample[length] = (uint8_t)(state->lifeData.ppO2Sensor_bar[i] * 100.0f + 0.5f); |
| 38 | 565 length += 1; |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
566 addU16(&sample[length], (uint16_t)(state->lifeData.sensorVoltage_mV[i] * 10.0f + 0.5f)); |
| 38 | 567 length += 2; |
| 568 } | |
| 569 } | |
| 570 else | |
| 571 { | |
| 572 divisor.ppo2--; | |
| 573 } | |
| 574 } | |
| 575 | |
| 576 | |
| 577 if(smallHeader.decoplanDivisor) | |
| 578 { | |
| 579 if(divisor.decoplan == 0) | |
| 580 { | |
| 581 divisor.decoplan = smallHeader.decoplanDivisor - 1; | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
582 if(state->diveSettings.deco_type.ub.standard == VPM_MODE) |
| 38 | 583 { |
| 584 for(int i = 0; i <15; i++) | |
| 585 { | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
586 sample[length] = state->decolistVPM.output_stop_length_seconds[i] / 60; |
| 38 | 587 length += 1; |
| 588 } | |
| 589 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
590 else if(state->diveSettings.deco_type.ub.standard == GF_MODE) |
| 38 | 591 { |
| 592 for(int i = 0; i <15; i++) | |
| 593 { | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
594 sample[length] = state->decolistBuehlmann.output_stop_length_seconds[i] / 60; |
| 38 | 595 length += 1; |
| 596 } | |
| 597 } | |
| 598 else | |
| 599 { | |
| 600 for(int i = 0; i <15; i++) | |
| 601 { | |
| 602 sample[length] = 0; | |
| 603 length += 1; | |
| 604 } | |
| 605 } | |
| 606 // add16(&sample[length], state.temperature); | |
| 607 //length += 2; | |
| 608 } | |
| 609 else | |
| 610 { | |
| 611 divisor.decoplan --; | |
| 612 } | |
| 613 } | |
| 614 if(divisor.cns == 0) | |
| 615 { | |
| 616 divisor.cns = smallHeader.cnsDivisor - 1; | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
617 addU16(&sample[length], (uint16_t)state->lifeData.cns); |
| 38 | 618 length += 2; |
| 619 } | |
| 620 else | |
| 621 { | |
| 622 divisor.cns--; | |
| 623 } | |
| 624 | |
| 625 profileByteFlag.uw = length - 3; | |
| 626 if(eventByte1.uw) | |
| 627 { | |
| 628 profileByteFlag.ub.bit7 = 1; | |
| 629 } | |
| 630 sample[2] = profileByteFlag.uw; | |
| 631 logbook_writedata((void *) sample,length); | |
| 632 | |
| 633 } | |
| 634 | |
| 635 /** | |
| 636 ****************************************************************************** | |
| 637 * @brief readSample. / Reads data of one logbook sample | |
| 281 | 638 * @author heinrichs weikamp |
| 38 | 639 * @version V0.0.1 |
| 640 * @date 22-April-2014 | |
| 641 ****************************************************************************** | |
| 642 * | |
| 643 * @param int32_t* depth: output Value | |
| 644 * @param int16_t * gasid: output Value | |
| 645 * @param int32_t* temperature: output Value | |
| 646 * @param int32_t* sensor1, sensor2, sensor3: output Value | |
| 647 * @param int32_t* cns: output Value | |
| 648 * @return bytes read / 0 = reading Error | |
| 649 */ | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
650 static uint16_t readSample(int32_t* depth, int16_t * gasid, int16_t* setpoint_cbar, int32_t* temperature, int32_t* sensor1, int32_t* sensor2, int32_t* sensor3, int32_t* cns, SManualGas* manualGas, int16_t* bailout, int16_t* decostopDepth) |
| 38 | 651 { |
| 652 int length = 0; | |
| 653 _Bool bEvent = 0; | |
| 654 bit8_Type eventByte1, eventByte2; | |
| 655 bit8_Type profileByteFlag; | |
| 656 | |
| 657 eventByte1.uw = 0; | |
| 658 eventByte2.uw = 0; | |
| 659 uint8_t tempU8 = 0; | |
| 660 uint16_t temp = 0; | |
| 661 uint16_t bytesRead = 0; | |
| 662 | |
| 663 if(gasid) | |
| 664 *gasid = -1; | |
| 665 if(temperature) | |
| 666 *temperature = -1000; | |
| 667 if(sensor1) | |
| 668 *sensor1 = -1; | |
| 669 if(sensor2) | |
| 670 *sensor2 = -1; | |
| 671 if(sensor3) | |
| 672 *sensor3 = -1; | |
| 673 if(cns) | |
| 674 *cns = -1; | |
| 675 if(setpoint_cbar) | |
| 676 *setpoint_cbar = -1; | |
| 677 if(bailout) | |
| 678 *bailout = -1; | |
| 679 if(manualGas) | |
| 680 { | |
| 681 manualGas->percentageO2 =-1; | |
| 682 manualGas->percentageHe =-1; | |
| 683 } | |
| 684 if(decostopDepth) | |
| 685 *decostopDepth = -1; | |
| 686 | |
| 687 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); | |
| 688 if(depth) | |
| 689 *depth = (int32_t)temp; | |
| 690 bytesRead += 2; | |
| 691 | |
| 692 ext_flash_read_next_sample_part( &profileByteFlag.uw, 1); | |
| 693 bytesRead ++; | |
| 694 | |
| 695 bEvent = profileByteFlag.ub.bit7; | |
| 696 profileByteFlag.ub.bit7 = 0; | |
| 697 length = profileByteFlag.uw; | |
| 698 | |
| 699 if(bEvent) | |
| 700 { | |
| 701 ext_flash_read_next_sample_part( &eventByte1.uw, 1); | |
| 702 bytesRead ++; | |
| 703 | |
| 704 length--; | |
| 705 | |
| 706 //second event byte | |
| 707 if(eventByte1.ub.bit7) | |
| 708 { | |
| 709 ext_flash_read_next_sample_part( &eventByte2.uw, 1); | |
| 710 bytesRead ++; | |
| 711 length--; | |
| 712 } | |
| 713 else | |
| 714 { | |
| 715 eventByte2.uw = 0; | |
| 716 } | |
| 717 | |
| 718 //manual Gas Set | |
| 719 if( eventByte1.ub.bit4) | |
| 720 { | |
| 721 //Evaluate manual Gas | |
| 722 ext_flash_read_next_sample_part( (uint8_t*)&tempU8, 1); | |
| 723 bytesRead +=1; | |
| 724 length -= 1; | |
| 725 manualGas->percentageO2 = tempU8; | |
| 726 ext_flash_read_next_sample_part( (uint8_t*)&tempU8, 1); | |
| 727 bytesRead +=1; | |
| 728 length -= 1; | |
| 729 manualGas->percentageHe = tempU8; | |
| 730 if(gasid) | |
| 731 *gasid = 0; | |
| 732 } | |
| 733 //gas change | |
| 734 if( eventByte1.ub.bit5) | |
| 735 { | |
| 736 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 737 bytesRead +=1; | |
| 738 length -= 1; | |
| 739 if(gasid) | |
| 740 *gasid = (uint16_t)tempU8; | |
| 741 } | |
| 742 //SetpointChange | |
| 743 if( eventByte1.ub.bit6) | |
| 744 { | |
| 745 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 746 *setpoint_cbar = tempU8; | |
| 747 bytesRead +=1; | |
| 748 length -= 1; | |
| 749 } | |
| 750 | |
| 751 // second event Byte | |
| 752 //bailout | |
| 753 if(eventByte2.ub.bit1) | |
| 754 { | |
| 755 //evaluate bailout gas Gas | |
| 756 *bailout = 1; | |
| 757 | |
| 758 ext_flash_read_next_sample_part( (uint8_t*)&tempU8, 1); | |
| 759 bytesRead +=1; | |
| 760 length -= 1; | |
| 761 manualGas->percentageO2 = tempU8; | |
| 762 ext_flash_read_next_sample_part( (uint8_t*)&tempU8, 1); | |
| 763 bytesRead +=1; | |
| 764 length -= 1; | |
| 765 manualGas->percentageHe = tempU8; | |
| 766 | |
| 767 if(gasid) | |
| 768 *gasid = 0; | |
| 769 } | |
| 770 } | |
| 771 | |
| 772 if(divisor.temperature == 0) | |
| 773 { | |
| 774 divisor.temperature = smallHeader.tempDivisor - 1; | |
| 775 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); | |
| 776 bytesRead +=2; | |
| 777 length -= 2; | |
| 778 if(temperature) | |
| 779 { | |
| 780 *temperature = (int32_t)temp; | |
| 781 } | |
| 782 } | |
| 783 else | |
| 784 { | |
| 785 divisor.temperature--; | |
| 786 } | |
| 787 | |
| 788 if(smallHeader.deco_ndlDivisor > 0) | |
| 789 { | |
| 790 if(divisor.deco_ndl == 0) | |
| 791 { | |
| 792 divisor.deco_ndl = smallHeader.deco_ndlDivisor - 1; | |
| 793 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 794 if(decostopDepth) | |
| 795 { | |
| 796 *decostopDepth = tempU8 * 100; | |
| 797 } | |
| 798 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 799 bytesRead += 2; | |
| 800 length -= 2; | |
| 801 } | |
| 802 else | |
| 803 { | |
| 804 divisor.deco_ndl--; | |
| 805 } | |
| 806 } | |
| 807 | |
| 808 if(divisor.ppo2 == 0) | |
| 809 { | |
| 810 int32_t ppO2Tmp = 0; | |
| 811 divisor.ppo2 = smallHeader.ppo2Divisor -1; | |
| 812 for(int i = 0; i <3 ; i++) | |
| 813 { | |
| 814 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 815 ppO2Tmp += tempU8; | |
| 816 bytesRead +=1; | |
| 817 length -= 1; | |
| 818 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); | |
| 819 bytesRead +=2; | |
| 820 length -= 2; | |
| 821 if(sensor1 && (i==0)) | |
| 822 *sensor1 = (((int32_t)tempU8) * 0xFFFF) + temp; | |
| 823 if(sensor2 && (i==1)) | |
| 824 *sensor2 = (((int32_t)tempU8) * 0xFFFF) + temp; | |
| 825 if(sensor3 && (i==2)) | |
| 826 *sensor3 = (((int32_t)tempU8) * 0xFFFF) + temp; | |
| 827 } | |
| 828 } | |
| 829 else | |
| 830 { | |
| 831 divisor.ppo2--; | |
| 832 } | |
| 833 | |
| 834 if(smallHeader.decoplanDivisor > 0) | |
| 835 { | |
| 836 if(divisor.decoplan == 0) | |
| 837 { | |
| 838 divisor.decoplan = smallHeader.decoplanDivisor - 1; | |
| 839 for(int i = 0; i <15; i++) | |
| 840 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 841 bytesRead += 15; | |
| 842 length -= 15; | |
| 843 } | |
| 844 else | |
| 845 { | |
| 846 divisor.decoplan--; | |
| 847 } | |
| 848 } | |
| 849 | |
| 850 | |
| 851 | |
| 852 if(divisor.cns == 0) | |
| 853 { | |
| 854 divisor.cns = smallHeader.cnsDivisor - 1; | |
| 855 | |
| 856 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); | |
| 857 bytesRead +=2; | |
| 858 length -= 2; | |
| 859 if(cns) | |
| 860 { | |
| 861 *cns = (int32_t)temp; | |
| 862 } | |
| 863 } | |
| 864 else | |
| 865 { | |
| 866 divisor.cns--; | |
| 867 } | |
| 868 | |
| 869 if (length != 0) | |
| 870 return 0; | |
| 871 | |
| 872 return bytesRead; | |
| 873 } | |
| 874 /** | |
| 875 ****************************************************************************** | |
| 876 * @brief logbook_readSampleData. / Reads sample data of whole logbook entry | |
| 281 | 877 * @author heinrichs weikamp |
| 38 | 878 * @version V0.0.1 |
| 879 * @date 22-April-2014 | |
| 880 ****************************************************************************** | |
| 881 * | |
| 882 * @param uint8_t StepBackwards: witch lookbook entry? | |
| 883 * @param uint16_t length : maxlength of output arrays | |
| 884 * @param int32_t* depth : output array | |
| 885 * @param int16_t * gasid : output array | |
| 886 * @param int32_t* temperature : output array | |
| 887 * @param int32_t* ppo2 : output array | |
| 888 * @param int32_t* cns : output array | |
| 889 * @return length of output | |
| 890 */ | |
| 891 uint16_t logbook_readSampleData(uint8_t StepBackwards, uint16_t length,uint16_t* depth, uint8_t* gasid, int16_t* temperature, uint16_t* ppo2, uint16_t* setpoint, uint16_t* sensor1, uint16_t* sensor2, uint16_t* sensor3, uint16_t* cns, uint8_t* bailout, uint16_t* decostopDepth) | |
| 892 { | |
| 893 //Test read | |
| 894 //SLogbookHeader header; | |
| 895 | |
| 896 //logbook_getHeader(&header); | |
| 897 SLogbookHeader header; | |
| 898 int iNum; | |
| 899 int firstgasid = 0; | |
| 900 int retVal = 0; | |
| 901 int compression = 0; | |
| 902 int i; | |
| 903 // uint32_t diveTime_seconds; | |
| 904 int32_t depthVal = 0; | |
| 905 int16_t gasidVal = 0; | |
| 906 int16_t setPointVal = 0; | |
| 907 int16_t bailoutVal = 0; | |
| 908 int16_t bailoutLast = 0; | |
| 909 uint16_t setPointLast = 0; | |
| 910 int32_t temperatureVal = 0; | |
| 911 int32_t sensor1Val = 0; | |
| 912 int32_t sensor2Val = 0; | |
| 913 int32_t sensor3Val = 0; | |
| 914 int32_t sensor1Last = 0; | |
| 915 int32_t sensor2Last = 0; | |
| 916 int32_t sensor3Last = 0; | |
| 917 int32_t cnsVal = 0; | |
| 918 int32_t depthLast = 0; | |
| 919 int16_t gasidLast = 0; | |
| 920 int32_t temperatureLast = 0; | |
| 921 int32_t temperatureFirst = 0; | |
| 922 int32_t cnsLast = 0; | |
| 923 int16_t decostepDepthVal = 0; | |
| 924 int16_t decostepDepthLast = 0; | |
| 925 | |
| 926 SManualGas manualGasVal; | |
| 927 SManualGas manualGasLast; | |
| 928 manualGasLast.percentageO2 = 0; | |
| 929 manualGasLast.percentageHe = 0; | |
| 930 | |
| 931 float ambiant_pressure_bar = 0; | |
| 932 float ppO2 = 0; | |
| 933 ext_flash_read_dive_header((uint8_t*)&header, StepBackwards); | |
| 934 for(i = 0;i< 5;i++) | |
| 935 { | |
| 936 if(header.gasordil[i].note.ub.first) | |
| 937 break; | |
| 938 } | |
| 939 firstgasid = i + 1; | |
| 940 if(header.diveMode == DIVEMODE_CCR) | |
| 941 setPointLast = header.setpoint[0].setpoint_cbar; | |
| 942 else | |
| 943 setPointLast = 0; | |
| 944 //diveTime_seconds = header.diveTime_seconds ; | |
| 945 for(compression = 1; compression < 100; compression ++) | |
| 946 { | |
| 947 if((header.total_diveTime_seconds / header.samplingRate)/compression <= length) | |
| 948 break; | |
| 949 } | |
| 950 | |
| 951 | |
| 952 for(i = 0;i< length;i++) | |
| 953 { | |
| 954 if(depth) | |
| 955 depth[i] = 0; | |
| 956 if(temperature) | |
| 957 temperature[i] = 0; | |
| 958 if(gasid) | |
| 959 gasid[i] = 0; | |
| 960 if(ppo2) | |
| 961 ppo2[i] = 0; | |
| 962 if(setpoint) | |
| 963 setpoint[i] = 0; | |
| 964 if(sensor1) | |
| 965 sensor1[i] = 0; | |
| 966 if(sensor2) | |
| 967 sensor2[i] = 0; | |
| 968 if(sensor3) | |
| 969 sensor3[i] = 0; | |
| 970 if(cns) | |
| 971 cns[i] = 0; | |
| 972 } | |
| 973 //We start with fist gasid | |
| 974 gasidLast = firstgasid; | |
| 975 | |
| 976 | |
| 977 //uint16_t* ppo2, uint16_t* cns# | |
| 978 uint32_t totalNumberOfBytes = 0; | |
| 979 uint32_t bytesRead = 0; | |
| 980 ext_flash_open_read_sample( StepBackwards,&totalNumberOfBytes); | |
| 981 ext_flash_read_next_sample_part((uint8_t*)&smallHeader, sizeof(SSmallHeader)); | |
| 982 bytesRead += sizeof(SSmallHeader); | |
| 983 | |
| 984 clear_divisor(); | |
| 985 | |
| 986 iNum = 0; | |
| 987 int counter = 0; | |
| 988 temperatureLast = -1000; | |
| 989 while ((bytesRead < totalNumberOfBytes) && (iNum < length)) | |
| 990 { | |
| 991 ext_flash_set_entry_point(); | |
| 992 divisorBackup = divisor; | |
| 993 retVal = readSample(&depthVal,&gasidVal, &setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, &decostepDepthVal); | |
| 994 | |
| 995 if(retVal == 0) | |
| 996 { | |
| 997 //Error try to read again!!! | |
| 998 ext_flash_reopen_read_sample_at_entry_point(); | |
| 999 divisor = divisorBackup; | |
| 1000 retVal = readSample(&depthVal,&gasidVal,&setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, &decostepDepthVal); | |
| 1001 | |
| 1002 if(retVal == 0) | |
| 1003 break; | |
| 1004 } | |
| 1005 bytesRead +=retVal; | |
| 1006 | |
| 1007 //if for some variable no new value is in the sample for (z.B. gasidVal = -1), we take the last value | |
| 1008 if(depthVal == -1) | |
| 1009 depthVal = depthLast; | |
| 1010 else | |
| 1011 depthLast = depthVal; | |
| 1012 | |
| 1013 if(gasidVal == -1) | |
| 1014 gasidVal = gasidLast; | |
| 1015 else | |
| 1016 gasidLast = gasidVal; | |
| 1017 | |
| 1018 if(temperatureVal == -1000) | |
| 1019 temperatureVal = temperatureLast; | |
| 1020 else | |
| 1021 { | |
| 1022 if(temperatureLast == -1000) | |
| 1023 temperatureFirst = temperatureVal; | |
| 1024 temperatureLast = temperatureVal; | |
| 1025 } | |
| 1026 | |
| 1027 if(setPointVal == -1) | |
| 1028 setPointVal = setPointLast; | |
| 1029 else | |
| 1030 setPointLast = setPointVal; | |
| 1031 | |
| 1032 if(sensor1Val == -1) | |
| 1033 sensor1Val = sensor1Last; | |
| 1034 else | |
| 1035 sensor1Last = sensor1Val; | |
| 1036 | |
| 1037 if(sensor2Val == -1) | |
| 1038 sensor2Val = sensor2Last; | |
| 1039 else | |
| 1040 sensor2Last = sensor2Val; | |
| 1041 | |
| 1042 if(sensor3Val == -1) | |
| 1043 sensor3Val = sensor3Last; | |
| 1044 else | |
| 1045 sensor3Last = sensor3Val; | |
| 1046 | |
| 1047 if(cnsVal == -1) | |
| 1048 cnsVal = cnsLast; | |
| 1049 else | |
| 1050 cnsLast = cnsVal; | |
| 1051 | |
| 1052 if(manualGasVal.percentageO2 == -1) | |
| 1053 manualGasVal = manualGasLast; | |
| 1054 else | |
| 1055 manualGasLast = manualGasVal; | |
| 1056 | |
| 1057 if(bailoutVal == -1) | |
| 1058 bailoutVal = bailoutLast; | |
| 1059 else | |
| 1060 bailoutLast = bailoutVal; | |
| 1061 | |
| 1062 if(decostepDepthVal == -1) | |
| 1063 decostepDepthVal = decostepDepthLast; | |
| 1064 else | |
| 1065 decostepDepthLast = decostepDepthVal; | |
| 1066 | |
| 1067 counter++; | |
| 1068 // Heed compression | |
| 1069 // Write here to arrays | |
| 1070 if(counter == compression) | |
| 1071 { | |
| 1072 if(depth) | |
| 1073 depth[iNum] = depthVal; | |
| 1074 if(gasid) | |
| 1075 gasid[iNum] = gasidVal; | |
| 1076 if(temperature) | |
| 1077 temperature[iNum] = temperatureVal; | |
| 1078 if(cns) | |
| 1079 cns[iNum] = cnsVal; | |
| 1080 if(bailout) | |
| 1081 bailout[iNum] = bailoutVal; | |
| 1082 if(decostopDepth) | |
| 1083 decostopDepth[iNum] = decostepDepthVal; | |
| 1084 | |
| 1085 if(ppo2) | |
| 1086 { | |
| 1087 //Calc ppo2 - Values | |
| 1088 SGas gas; | |
| 1089 gas.setPoint_cbar = setPointVal; | |
| 1090 if(gasidVal > 0) | |
| 1091 { | |
| 1092 gas.helium_percentage = header.gasordil[gasidVal - 1].helium_percentage; | |
| 1093 gas.nitrogen_percentage = 100 - gas.helium_percentage - header.gasordil[gasidVal - 1].oxygen_percentage; | |
| 1094 } | |
| 1095 else | |
| 1096 { | |
| 1097 gas.helium_percentage = manualGasVal.percentageHe; | |
| 1098 gas.nitrogen_percentage = 100 - gas.helium_percentage - manualGasVal.percentageO2; | |
| 1099 } | |
| 1100 ambiant_pressure_bar =((float)(depthVal + header.surfacePressure_mbar))/1000; | |
| 1101 ppO2 = decom_calc_ppO2(ambiant_pressure_bar, &gas ); | |
| 1102 ppo2[iNum] = (uint16_t) ( ppO2 * 100); | |
| 1103 } | |
| 1104 | |
| 1105 if(setpoint) | |
| 1106 setpoint[iNum] = setPointVal; | |
| 1107 | |
| 1108 if(sensor1) | |
| 1109 sensor1[iNum] = (sensor1Val / 0xFFFF) & 0xFF; | |
| 1110 if(sensor2) | |
| 1111 sensor2[iNum] = (sensor2Val / 0xFFFF) & 0xFF; | |
| 1112 if(sensor3) | |
| 1113 sensor3[iNum] = (sensor3Val / 0xFFFF) & 0xFF; | |
| 1114 iNum++; | |
| 1115 counter = 0; | |
| 1116 } | |
| 1117 } | |
| 1118 | |
| 1119 // Fix first Temperature Entries 150930 hw | |
| 1120 if(temperature) | |
| 1121 { | |
| 1122 int i = 0; | |
| 1123 while((temperature[i] == -1000) && (i < iNum)) | |
| 1124 temperature[i++] = temperatureFirst; | |
| 1125 } | |
| 1126 | |
| 1127 ext_flash_close_read_sample(); | |
| 1128 return iNum; | |
| 1129 } | |
| 1130 | |
| 1131 | |
| 1132 /******************************************************************************** | |
| 1133 * @brief logbook_InitAndWrite. / Controls writing of logbook | |
| 1134 * Should be called ten times per second | |
| 1135 * Automatically Initializes logbook at beginning of dive, | |
| 1136 * write samples every 2 seconds | |
| 1137 * and finishes logbook after end of dive | |
| 1138 *********************************************************************************/ | |
| 1139 | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1140 void logbook_InitAndWrite(const SDiveState *pStateReal) |
| 38 | 1141 { |
| 1142 SSettings *pSettings = settingsGetPointer(); | |
| 1143 static uint8_t bDiveMode = 0; | |
| 1144 static uint32_t tickstart = 0; | |
| 1145 uint32_t ticksdiff = 0; | |
| 1146 uint32_t lasttick = 0; | |
| 1147 static float min_temperature_float_celsius = 0; | |
| 1148 | |
| 1149 if(!bDiveMode) | |
| 1150 { | |
| 1151 if((pStateReal->mode == MODE_DIVE) && (pStateReal->diveSettings.diveMode != DIVEMODE_Apnea) && (pStateReal->lifeData.dive_time_seconds >= 5)) | |
| 1152 { | |
| 1153 //InitdiveProfile | |
| 1154 pSettings->totalDiveCounter++; | |
| 1155 logbook_initNewdiveProfile(pStateReal,settingsGetPointer()); | |
| 1156 min_temperature_float_celsius = pStateReal->lifeData.temperature_celsius; | |
| 1157 //Write logbook sample | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1158 logbook_writeSample(pStateReal); |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1159 resetEvents(pStateReal); |
| 38 | 1160 tickstart = HAL_GetTick(); |
| 1161 bDiveMode = 1; | |
| 1162 } | |
| 1163 } | |
| 1164 else if((pStateReal->mode == MODE_DIVE) && (pStateReal->diveSettings.diveMode != DIVEMODE_Apnea)) | |
| 1165 { | |
| 1166 lasttick = HAL_GetTick(); | |
| 1167 ticksdiff = time_elapsed_ms(tickstart,lasttick); | |
| 1168 // | |
| 1169 if(ticksdiff >= 2000) | |
| 1170 { | |
| 1171 //Write logbook sample | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1172 logbook_writeSample(pStateReal); |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1173 resetEvents(pStateReal); |
| 38 | 1174 if(min_temperature_float_celsius > pStateReal->lifeData.temperature_celsius) |
| 1175 min_temperature_float_celsius = pStateReal->lifeData.temperature_celsius; | |
| 1176 tickstart = lasttick; | |
| 1177 if((bDiveMode == 1) && (pStateReal->lifeData.dive_time_seconds >= pSettings->divetimeToCreateLogbook)) | |
| 1178 { | |
| 1179 ext_flash_create_new_dive_log((uint8_t*)&header); | |
| 1180 /** save settings | |
| 1181 * with new lastDiveLogId and time and day | |
| 1182 */ | |
| 1183 pSettings->personalDiveCount++; | |
| 1184 if(pSettings->logbookOffset) | |
| 1185 { | |
| 1186 pSettings->logbookOffset++; | |
| 1187 } | |
| 1188 ext_flash_write_settings(); | |
| 1189 ext_flash_disable_protection_for_logbook(); | |
| 1190 bDiveMode = 3; | |
| 1191 } | |
| 1192 if(bDiveMode == 3) | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1193 logbook_UpdateHeader(pStateReal); |
| 38 | 1194 } |
| 1195 } | |
| 1196 else if(bDiveMode == 3) | |
| 1197 { | |
| 1198 //End of Dive | |
| 1199 logbook_SetAverageDepth(pStateReal->lifeData.average_depth_meter); | |
| 1200 logbook_SetMinTemperature(min_temperature_float_celsius); | |
| 1201 logbook_SetMaxCNS(pStateReal->lifeData.cns); | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1202 logbook_SetCompartmentDesaturation(pStateReal); |
| 38 | 1203 logbook_SetLastStop(pStateReal->diveSettings.last_stop_depth_bar); |
| 1204 logbook_EndDive(); | |
| 1205 bDiveMode = 0; | |
| 1206 } else | |
| 1207 { | |
| 1208 ext_flash_enable_protection(); | |
| 1209 } | |
| 1210 } | |
| 1211 | |
| 1212 | |
| 1213 /* Private functions ---------------------------------------------------------*/ | |
| 1214 | |
| 1215 /******************************************************************************** | |
| 1216 * @brief logbook_UpdateHeader. / | |
| 1217 * set date, time, max depth. etc. pp. | |
| 1218 * the internal pointer to the end of profile and length will be set by | |
| 1219 ext_flash_close_new_dive_log() in externLogbookFlash.c | |
| 1220 * @author heinrichs weikamp gmbh | |
| 1221 * @version V0.0.1 | |
| 1222 * @date 27-Nov-2014 | |
| 1223 *********************************************************************************/ | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1224 static void logbook_UpdateHeader(const SDiveState *pStateReal) |
| 38 | 1225 { |
| 1226 // uint16_t secondsAtShallow = 0; | |
| 1227 RTC_DateTypeDef Sdate; | |
| 1228 RTC_TimeTypeDef Stime; | |
| 1229 uint32_t time1_u32, time2_u32; | |
| 1230 uint32_t divetimeHelper; | |
| 1231 | |
| 1232 /* time and day */ | |
| 1233 /* don't update CHANGE 160224 hw, maybe save actual time and date at other place | |
| 1234 translateDate(pStateReal->lifeData.dateBinaryFormat, &Sdate); | |
| 1235 translateTime(pStateReal->lifeData.timeBinaryFormat, &Stime); | |
| 1236 | |
| 1237 header.dateYear = Sdate.Year; | |
| 1238 header.dateMonth = Sdate.Month; | |
| 1239 header.dateDay = Sdate.Date; | |
| 1240 header.timeHour = Stime.Hours; | |
| 1241 header.timeMinute = Stime.Minutes; | |
| 1242 */ | |
| 1243 /// 160315 Quick fix for empty date problem | |
| 1244 if((!(header.dateYear)) || (!(header.dateMonth)) || (!(header.dateDay))) | |
| 1245 { | |
| 1246 translateDate(pStateReal->lifeData.dateBinaryFormat, &Sdate); | |
| 1247 translateTime(pStateReal->lifeData.timeBinaryFormat, &Stime); | |
| 1248 | |
| 1249 header.dateYear = Sdate.Year; | |
| 1250 header.dateMonth = Sdate.Month; | |
| 1251 header.dateDay = Sdate.Date; | |
| 1252 | |
| 1253 time1_u32 = (uint32_t)header.timeMinute + (uint32_t)(header.timeHour * 60); | |
| 1254 time2_u32 = (uint32_t)Stime.Minutes + (uint32_t)(Stime.Hours * 60); | |
| 1255 if(time2_u32 < time1_u32) | |
| 1256 { | |
| 1257 if(header.dateDay > 1) | |
| 1258 { | |
| 1259 header.dateDay -= 1; | |
| 1260 } | |
| 1261 else | |
| 1262 { | |
| 1263 header.dateMonth --; | |
| 1264 if(!header.dateMonth) | |
| 1265 { | |
| 1266 header.dateYear--; | |
| 1267 header.dateMonth = 12; | |
| 1268 header.dateDay = 31; | |
| 1269 } | |
| 1270 else | |
| 1271 { | |
| 1272 if(header.dateMonth == 2) | |
| 1273 header.dateDay = 28; | |
| 1274 else | |
| 1275 if((header.dateMonth == 4) || (header.dateMonth == 6) || (header.dateMonth == 9) || (header.dateMonth == 11)) | |
| 1276 header.dateDay = 30; | |
| 1277 else | |
| 1278 header.dateDay = 31; | |
| 1279 } | |
| 1280 } | |
| 1281 } | |
| 1282 } | |
| 1283 | |
| 1284 /* duration */ | |
| 1285 header.total_diveTime_seconds = pStateReal->lifeData.dive_time_seconds; | |
| 1286 header.maxDepth = pStateReal->lifeData.max_depth_meter * 100; | |
| 1287 | |
| 1288 /* old: | |
| 1289 | |
| 1290 secondsAtShallow = pSettings->timeoutDiveReachedZeroDepth; | |
| 1291 if(pStateReal->lifeData.dive_time_seconds <= secondsAtShallow) | |
| 1292 secondsAtShallow = 0; | |
| 1293 header.diveTimeMinutes = (header.total_diveTime_seconds - secondsAtShallow )/ 60; | |
| 1294 header.diveTimeSeconds = header.total_diveTime_seconds - secondsAtShallow - (header.diveTimeMinutes * 60); | |
| 1295 */ | |
| 1296 divetimeHelper = pStateReal->lifeData.dive_time_seconds_without_surface_time; | |
| 1297 header.diveTimeMinutes = (uint16_t)(divetimeHelper/60); | |
| 1298 divetimeHelper -= 60 * (uint32_t)header.diveTimeMinutes; | |
| 1299 header.diveTimeSeconds = (uint16_t)divetimeHelper; | |
| 1300 | |
| 1301 /* deco algorithm (final) */ | |
| 1302 if(pStateReal->diveSettings.deco_type.ub.standard == GF_MODE) | |
| 1303 { | |
| 1304 header.decoModel = 1; | |
| 1305 header.gfLow_or_Vpm_conservatism = pStateReal->diveSettings.gf_low; | |
| 1306 header.gfHigh = pStateReal->diveSettings.gf_high; | |
| 1307 } | |
| 1308 else | |
| 1309 { | |
| 1310 header.decoModel = 2; | |
| 1311 header.gfLow_or_Vpm_conservatism = pStateReal->diveSettings.vpm_conservatism; | |
| 1312 header.gfHigh = 0; | |
| 1313 } | |
| 1314 | |
| 1315 /* tissue load */ | |
| 1316 memcpy(header.n2Compartments, pStateReal->lifeData.tissue_nitrogen_bar, 64); | |
| 1317 memcpy(header.heCompartments, pStateReal->lifeData.tissue_helium_bar, 64); | |
| 1318 | |
| 1319 } | |
| 1320 | |
| 1321 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
1322 static void logbook_SetAverageDepth(float average_depth_meter) |
| 38 | 1323 { |
| 1324 header.averageDepth_mbar = (uint16_t)(average_depth_meter * 100); | |
| 1325 } | |
| 1326 | |
| 1327 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
1328 static void logbook_SetMinTemperature(float min_temperature_celsius) |
| 38 | 1329 { |
| 1330 header.minTemp = (int16_t)((min_temperature_celsius * 10.0f) + 0.5f); | |
| 1331 } | |
| 1332 | |
| 1333 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
1334 static void logbook_SetMaxCNS(float max_cns_percentage) |
| 38 | 1335 { |
| 1336 if(max_cns_percentage < 9999) | |
| 1337 header.maxCNS = (uint16_t)(max_cns_percentage); | |
| 1338 else | |
| 1339 header.maxCNS = 9999; | |
| 1340 } | |
| 1341 | |
| 1342 | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1343 static void logbook_SetCompartmentDesaturation(const SDiveState * pStateReal) |
| 38 | 1344 { |
|
225
2bb1db22b5f5
cleanup: random set of cleanups
Jan Mulder <jlmulder@xs4all.nl>
parents:
199
diff
changeset
|
1345 SLifeData2 secondaryInformation = { 0 }; |
| 38 | 1346 |
| 1347 decom_tissues_desaturation_time(&pStateReal->lifeData, &secondaryInformation); | |
| 1348 for(int i=0;i<16;i++) | |
| 1349 { | |
| 1350 if(secondaryInformation.tissue_nitrogen_desaturation_time_minutes[i] <= (15 * 255)) | |
| 1351 header.n2CompartDesatTime_min[i] = (uint8_t)((secondaryInformation.tissue_nitrogen_desaturation_time_minutes[i] + 14) / 15); | |
| 1352 else | |
| 1353 header.n2CompartDesatTime_min[i] = 255; | |
| 1354 if(secondaryInformation.tissue_helium_desaturation_time_minutes[i] <= (15 * 255)) | |
| 1355 header.heCompartDesatTime_min[i] = (uint8_t)((secondaryInformation.tissue_helium_desaturation_time_minutes[i] + 14 )/ 15); | |
| 1356 else | |
| 1357 header.heCompartDesatTime_min[i] = 255; | |
| 1358 } | |
| 1359 } | |
| 1360 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
1361 static void logbook_SetLastStop(float last_stop_depth_bar) |
| 38 | 1362 { |
| 1363 header.lastDecostop_m = (uint8_t)(last_stop_depth_bar / 10.0f); | |
| 1364 } | |
| 1365 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
1366 static void logbook_writedata(void * data, int length_byte) |
| 38 | 1367 { |
| 1368 ext_flash_write_sample(data, length_byte); | |
| 1369 } | |
| 1370 | |
| 1371 | |
| 1372 /******************************************************************************** | |
| 1373 * @brief logbook_build_ostc3header. / | |
| 1374 * @author heinrichs weikamp gmbh | |
| 1375 * @version V0.0.2 | |
| 1376 * @date 27-Nov-2014 | |
| 1377 *********************************************************************************/ | |
| 1378 SLogbookHeaderOSTC3 * logbook_build_ostc3header(SLogbookHeader* pHead) | |
| 1379 { | |
| 1380 convert_Type data; | |
| 1381 | |
| 1382 memcpy(headerOSTC3.diveHeaderStart, &pHead->diveHeaderStart, 2); | |
| 1383 memcpy(headerOSTC3.pBeginProfileData, &pHead->pBeginProfileData, 3); | |
| 1384 memcpy(headerOSTC3.pEndProfileData, &pHead->pEndProfileData, 3); | |
| 1385 | |
| 1386 data.u8bit.byteHigh = 0; | |
| 1387 data.u8bit.byteLow = pHead->profileLength[0]; | |
| 1388 data.u8bit.byteMidLow = pHead->profileLength[1]; | |
| 1389 data.u8bit.byteMidHigh = pHead->profileLength[2]; | |
| 1390 | |
| 1391 if(data.u32bit != 0xFFFFFF) | |
| 1392 data.u32bit += 3; | |
| 1393 | |
| 1394 headerOSTC3.profileLength[0] = data.u8bit.byteLow; | |
| 1395 headerOSTC3.profileLength[1] = data.u8bit.byteMidLow; | |
| 1396 headerOSTC3.profileLength[2] = data.u8bit.byteMidHigh; | |
| 1397 | |
| 1398 memcpy(headerOSTC3.gasordil, pHead->gasordil, 20); | |
| 1399 | |
| 1400 if(pHead->logbookProfileVersion == LOGBOOK_VERSION) | |
| 1401 { | |
| 1402 headerOSTC3.logbookProfileVersion = LOGBOOK_VERSION_OSTC3; | |
| 1403 memcpy(headerOSTC3.personalDiveCount, &pHead->personalDiveCount, 2); | |
| 1404 headerOSTC3.safetyDistance_10cm = 0; | |
| 1405 | |
| 1406 for(int i=0;i<5;i++) | |
| 1407 { | |
| 1408 if(!pHead->gasordil[i].note.ub.active) | |
| 1409 headerOSTC3.gasordil[3 + (i*4)] = 0; | |
| 1410 else if(pHead->gasordil[i].note.ub.first) | |
| 1411 { | |
| 1412 /* depth = 0, note = 1 */ | |
| 1413 headerOSTC3.gasordil[2 + (i*4)] = 0; | |
| 1414 headerOSTC3.gasordil[3 + (i*4)] = 1; | |
| 1415 } | |
| 1416 else if( pHead->gasordil[i].depth_meter) | |
| 1417 { | |
| 1418 /* note = 3 */ | |
| 1419 headerOSTC3.gasordil[3 + (i*4)] = 3; | |
| 1420 } | |
| 1421 } | |
| 1422 } | |
| 1423 else | |
| 1424 { | |
| 1425 headerOSTC3.logbookProfileVersion = 0xFF; | |
| 1426 headerOSTC3.personalDiveCount[0] = 0xFF; | |
| 1427 headerOSTC3.personalDiveCount[1] = 0xFF; | |
| 1428 headerOSTC3.safetyDistance_10cm = 0xFF; | |
| 1429 } | |
| 1430 | |
| 1431 headerOSTC3.dateYear = pHead->dateYear; | |
| 1432 headerOSTC3.dateMonth = pHead->dateMonth; | |
| 1433 headerOSTC3.dateDay = pHead->dateDay; | |
| 1434 headerOSTC3.timeHour = pHead->timeHour; | |
| 1435 headerOSTC3.timeMinute = pHead->timeMinute; | |
| 1436 | |
| 1437 | |
| 1438 memcpy(headerOSTC3.maxDepth, &pHead->maxDepth, 2); | |
| 1439 memcpy(headerOSTC3.diveTimeMinutes, &pHead->diveTimeMinutes, 2); | |
| 1440 | |
| 1441 headerOSTC3.diveTimeSeconds = pHead->diveTimeSeconds; | |
| 1442 | |
| 1443 memcpy(headerOSTC3.minTemp, &pHead->minTemp, 2); | |
| 1444 memcpy(headerOSTC3.surfacePressure_mbar,&pHead->surfacePressure_mbar, 2); | |
| 1445 memcpy(headerOSTC3.desaturationTime, &pHead->desaturationTime, 2); | |
| 1446 | |
| 1447 headerOSTC3.firmwareVersionHigh = pHead->firmwareVersionHigh; | |
| 1448 headerOSTC3.firmwareVersionLow = pHead->firmwareVersionLow; | |
| 1449 | |
| 1450 memcpy(headerOSTC3.batteryVoltage, &pHead->batteryVoltage, 2); | |
| 1451 | |
| 1452 headerOSTC3.samplingRate = pHead->samplingRate; | |
| 1453 | |
| 1454 memcpy(headerOSTC3.cnsAtBeginning, &pHead->cnsAtBeginning, 2); | |
| 1455 | |
| 1456 headerOSTC3.gfAtBeginning = pHead->gfAtBeginning; | |
| 1457 headerOSTC3.gfAtEnd = pHead->gfAtEnd; | |
| 1458 | |
| 1459 memcpy(headerOSTC3.setpoint, pHead->setpoint, 10); | |
| 1460 | |
| 1461 headerOSTC3.salinity = pHead->salinity; | |
| 1462 | |
| 1463 memcpy(headerOSTC3.maxCNS, &pHead->maxCNS, 2); | |
| 1464 memcpy(headerOSTC3.averageDepth_mbar, &pHead->averageDepth_mbar, 2); | |
| 1465 memcpy(headerOSTC3.total_diveTime_seconds,&pHead->total_diveTime_seconds, 2); | |
| 1466 | |
| 1467 headerOSTC3.gfLow_or_Vpm_conservatism = pHead->gfLow_or_Vpm_conservatism; | |
| 1468 headerOSTC3.gfHigh = pHead->gfHigh; | |
| 1469 headerOSTC3.decoModel = pHead->decoModel; | |
| 1470 | |
| 1471 memcpy(headerOSTC3.diveNumber, &pHead->diveNumber, 2); | |
| 1472 | |
| 1473 headerOSTC3.diveMode = pHead->diveMode; | |
| 1474 headerOSTC3.CCRmode = pHead->CCRmode; | |
| 1475 | |
| 1476 memcpy(headerOSTC3.n2CompartDesatTime_min,pHead->n2CompartDesatTime_min, 16); | |
| 1477 memcpy(headerOSTC3.n2Compartments, pHead->n2Compartments, 64); | |
| 1478 memcpy(headerOSTC3.heCompartDesatTime_min,pHead->heCompartDesatTime_min, 16); | |
| 1479 memcpy(headerOSTC3.heCompartments, pHead->heCompartments, 64); | |
| 1480 | |
| 1481 headerOSTC3.lastDecostop_m = pHead->lastDecostop_m; | |
| 1482 | |
| 1483 memcpy(headerOSTC3.hwHudBattery_mV, &pHead->hwHudBattery_mV, 2); | |
| 1484 | |
| 1485 headerOSTC3.hwHudLastStatus = pHead->hwHudLastStatus; | |
| 1486 | |
| 1487 memcpy(headerOSTC3.batteryGaugeRegisters,&pHead->batteryGaugeRegisters, 6); | |
| 1488 | |
| 1489 | |
| 1490 memcpy(headerOSTC3.diveHeaderEnd, &pHead->diveHeaderEnd, 2); | |
| 1491 | |
| 1492 return &headerOSTC3; | |
| 1493 } | |
| 1494 | |
| 1495 | |
| 1496 /******************************************************************************** | |
| 1497 * @brief logbook_build_ostc3header_compact. / | |
| 1498 * @author heinrichs weikamp gmbh | |
| 1499 * @version V0.0.1 | |
| 1500 * @date 31-Juli-2015 | |
| 1501 *********************************************************************************/ | |
| 1502 SLogbookHeaderOSTC3compact * logbook_build_ostc3header_compact(SLogbookHeader* pHead) | |
| 1503 { | |
| 1504 convert_Type data; | |
| 1505 | |
| 1506 data.u8bit.byteHigh = 0; | |
| 1507 data.u8bit.byteLow = pHead->profileLength[0]; | |
| 1508 data.u8bit.byteMidLow = pHead->profileLength[1]; | |
| 1509 data.u8bit.byteMidHigh = pHead->profileLength[2]; | |
| 1510 | |
| 1511 if(data.u32bit != 0xFFFFFF) | |
| 1512 { | |
| 1513 data.u32bit += 3; | |
| 1514 | |
| 1515 headerOSTC3compact.profileLength[0] = data.u8bit.byteLow; | |
| 1516 headerOSTC3compact.profileLength[1] = data.u8bit.byteMidLow; | |
| 1517 headerOSTC3compact.profileLength[2] = data.u8bit.byteMidHigh; | |
| 1518 | |
| 1519 headerOSTC3compact.dateYear = pHead->dateYear; | |
| 1520 headerOSTC3compact.dateMonth = pHead->dateMonth; | |
| 1521 headerOSTC3compact.dateDay = pHead->dateDay; | |
| 1522 headerOSTC3compact.timeHour = pHead->timeHour; | |
| 1523 headerOSTC3compact.timeMinute = pHead->timeMinute; | |
| 1524 | |
| 1525 memcpy(headerOSTC3compact.maxDepth, &pHead->maxDepth, 2); | |
| 1526 memcpy(headerOSTC3compact.diveTimeMinutes, &pHead->diveTimeMinutes, 2); | |
| 1527 | |
| 1528 headerOSTC3compact.diveTimeSeconds = pHead->diveTimeSeconds; | |
| 1529 | |
| 1530 | |
| 1531 headerOSTC3compact.totalDiveNumberLow = pHead->diveNumber & 0xFF; | |
| 1532 headerOSTC3compact.totalDiveNumberHigh = (uint8_t)(pHead->diveNumber/256); | |
| 1533 headerOSTC3compact.profileVersion = 0x24; // Logbook-Profile version, 0x24 = date and time is start not end | |
| 1534 } | |
| 1535 else | |
| 1536 { | |
| 1537 memset(&headerOSTC3compact, 0xFF, sizeof(SLogbookHeaderOSTC3compact)); | |
| 1538 } | |
| 1539 return &headerOSTC3compact; | |
| 1540 } | |
| 1541 | |
| 1542 | |
| 1543 /** | |
| 1544 ****************************************************************************** | |
| 1545 * @brief logbook_readSampleData. / Reads sample data of whole logbook entry | |
| 281 | 1546 * @author heinrichs weikamp |
| 38 | 1547 * @version V0.0.1 |
| 1548 * @date 22-April-2014 | |
| 1549 ****************************************************************************** | |
| 1550 * | |
| 1551 * @param uint8_t StepBackwards: witch lookbook entry? | |
| 1552 * @param uint16_t length : maxlength of output arrays | |
| 1553 * @param int32_t* depth : output array | |
| 1554 * @param int16_t * gasid : output array | |
| 1555 * @param int32_t* temperature : output array | |
| 1556 * @param int32_t* ppo2 : output array | |
| 1557 * @param int32_t* cns : output array | |
| 1558 * @return length of output | |
| 1559 */ | |
| 1560 void logbook_recover_brokenlog(uint8_t headerId) | |
| 1561 { | |
| 1562 int16_t retVal; | |
| 1563 int32_t depthVal = 0; | |
| 1564 int16_t gasidVal = 0; | |
| 1565 int16_t setPointVal = 0; | |
| 1566 int16_t bailoutVal = 0; | |
| 1567 int32_t temperatureVal = 0; | |
| 1568 int32_t sensor1Val = 0; | |
| 1569 int32_t sensor2Val = 0; | |
| 1570 int32_t sensor3Val = 0; | |
| 1571 int32_t cnsVal = 0; | |
| 1572 SManualGas manualGasVal; | |
| 1573 | |
| 1574 //uint16_t* ppo2, uint16_t* cns# | |
| 1575 uint32_t bytesRead = 0; | |
| 1576 | |
| 1577 ext_flash_read_block_start(); | |
| 1578 ext_flash_read_next_sample_part((uint8_t*)&smallHeader, sizeof(SSmallHeader)); | |
| 1579 bytesRead += sizeof(SSmallHeader); | |
| 1580 | |
| 1581 clear_divisor(); | |
| 1582 | |
| 1583 | |
| 1584 int sampleCounter = 0; | |
| 1585 int maxdepth = 0; | |
| 1586 uint32_t avrdepth = 0; | |
| 1587 while (true) | |
| 1588 { | |
| 1589 | |
| 1590 ext_flash_set_entry_point(); | |
| 1591 divisorBackup = divisor; | |
| 1592 retVal = readSample(&depthVal,&gasidVal, &setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, NULL); | |
| 1593 if(retVal == 0) | |
| 1594 { | |
| 1595 //Error try to read again!!! | |
| 1596 ext_flash_reopen_read_sample_at_entry_point(); | |
| 1597 divisor = divisorBackup; | |
| 1598 retVal = readSample(&depthVal,&gasidVal, &setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, NULL); | |
| 1599 | |
| 1600 if(retVal == 0) | |
| 1601 { | |
| 1602 //Error try to read again!!! | |
| 1603 ext_flash_reopen_read_sample_at_entry_point(); | |
| 1604 divisor = divisorBackup; | |
| 1605 retVal = readSample(&depthVal,&gasidVal, &setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, NULL); | |
| 1606 | |
| 1607 if(retVal == 0) | |
| 1608 { | |
| 1609 ext_flash_reopen_read_sample_at_entry_point(); | |
| 1610 break; | |
| 1611 } | |
| 1612 | |
| 1613 } | |
| 1614 } | |
| 1615 if(depthVal > maxdepth) | |
| 1616 maxdepth = depthVal; | |
| 1617 avrdepth += depthVal; | |
| 1618 sampleCounter++; | |
| 1619 bytesRead +=retVal; | |
| 1620 } | |
| 1621 avrdepth/= sampleCounter; | |
| 1622 ext_flash_close_read_sample(); | |
| 1623 SLogbookHeader header; | |
| 1624 | |
| 1625 ext_flash_read_dive_header2((uint8_t*) &header, headerId, false); | |
| 1626 header.total_diveTime_seconds = sampleCounter * header.samplingRate; | |
| 1627 header.diveTimeMinutes = header.total_diveTime_seconds /60; | |
| 1628 header.diveTimeSeconds = header.total_diveTime_seconds - header.diveTimeMinutes * 60; | |
| 1629 header.maxDepth = maxdepth; | |
| 1630 header.averageDepth_mbar = avrdepth; | |
| 1631 SSettings * settings = settingsGetPointer(); | |
| 1632 settings->lastDiveLogId = headerId; | |
| 1633 ext_flash_close_new_dive_log((uint8_t *)&header); | |
| 1634 } | |
| 1635 | |
| 1636 /************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/ |