Mercurial > public > ostc4
annotate Discovery/Src/logbook.c @ 451:c2e02b87774f minor_improvments
Allocate received bar value to active gas (was static allocated to gas[1])
| author | ideenmodellierer |
|---|---|
| date | Tue, 24 Mar 2020 21:49:52 +0100 |
| parents | ee1434824c3f |
| children | 928a14568689 |
| rev | line source |
|---|---|
| 38 | 1 /** |
| 2 ****************************************************************************** | |
| 3 * @copyright heinrichs weikamp | |
| 4 * @file logbook.c | |
| 5 * @author heinrichs weikamp gmbh and heinrichs weikamp gmbh | |
| 6 * @date 22-Apr-2014 | |
| 7 * @version V0.0.3 | |
| 8 * @since 03-Feb-2016 | |
| 9 * @brief Everything about creating and evaluating the logbook | |
| 10 * without the flash part which is included in externLogbookFlash.c | |
| 11 * and the USB/Bluetooth part in tComm.c | |
| 12 * CHANGE V0.0.3 hw: ppO2 sensor values | |
| 13 * CHANGE V0.0.4 hw: fix event bytes according to hwos_interface.odt dated 160610 in bitbucket hwOS | |
| 14 * @bug | |
| 15 * @warning | |
| 16 @verbatim | |
| 17 ============================================================================== | |
| 18 ##### Header ##### | |
| 19 ============================================================================== | |
| 20 [..] SLogbookHeader | |
| 21 The order has changed in comparsion to OSTC3 for perfect alignment | |
| 22 with 16bit and 32bit. The header is 256kB as well. | |
| 23 DO NOT rearrange anything but add new data to a second page | |
| 24 beyond diveHeaderEnd. Use extraPagesWithData to indicate that there is | |
| 25 data available that was not available in the OSTC3 256KB | |
| 26 This data will be behind the diveHeaderEnd. DO NOT delete diveHeaderEnd. | |
| 27 | |
| 28 [..] SLogbookHeaderOSTC3 | |
| 29 is the format used by the OSTC3. | |
| 30 logbook_getHeaderOSTC3() does the job using the global headers in logbook.c | |
| 31 | |
| 32 [..] SSmallHeader | |
| 33 - is the format used by the OSTC3 | |
| 34 | |
| 35 [..] Summary | |
| 36 The header format is not perfect and might be optimized prior to | |
| 37 releasing the diving computer. For now it is good to be compatible | |
| 38 with PC software available for checking the content of the logbook | |
| 39 | |
| 40 | |
| 41 @endverbatim | |
| 42 ****************************************************************************** | |
| 43 * @attention | |
| 44 * | |
| 45 * <h2><center>© COPYRIGHT(c) 2014 heinrichs weikamp</center></h2> | |
| 46 * | |
| 47 ****************************************************************************** | |
| 48 */ | |
| 49 | |
| 50 /* Includes ------------------------------------------------------------------*/ | |
| 51 #include <stdint.h> | |
| 52 #include <string.h> | |
| 53 #include "logbook.h" | |
| 54 //#include "test_vpm.h" | |
| 55 #include "externLogbookFlash.h" | |
| 56 #include "data_exchange.h" | |
| 57 #include "decom.h" | |
| 58 #include "tHome.h" // for tHome_findNextStop() | |
| 445 | 59 #include "settings.h" |
| 38 | 60 |
| 61 /* Private types -------------------------------------------------------------*/ | |
| 62 | |
| 63 #define LOGBOOK_VERSION (0x30) | |
| 64 #define LOGBOOK_VERSION_OSTC3 (0x24) | |
| 65 | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
66 #define DEFAULT_SAMPLES (100) /* Number of sample data bytes in case of an broken header information */ |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
67 |
| 38 | 68 typedef struct /* don't forget to adjust void clear_divisor(void) */ |
| 69 { | |
| 70 uint8_t temperature; | |
| 71 uint8_t deco_ndl; | |
| 72 uint8_t gradientFactor; | |
| 73 uint8_t ppo2; | |
| 74 uint8_t decoplan; | |
| 75 uint8_t cns; | |
| 76 uint8_t tank; | |
| 77 } SDivisor; | |
| 78 | |
| 79 /* Exported variables --------------------------------------------------------*/ | |
| 80 | |
| 81 /* Private variables ---------------------------------------------------------*/ | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
82 static SLogbookHeader gheader; |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
83 static SLogbookHeaderOSTC3 headerOSTC3; |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
84 static SLogbookHeaderOSTC3compact headerOSTC3compact; |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
85 static SSmallHeader smallHeader; |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
86 static SDivisor divisor; |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
87 static SDivisor divisorBackup; |
| 38 | 88 |
| 89 /* Private function prototypes -----------------------------------------------*/ | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
90 static void clear_divisor(void); |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
91 static void logbook_SetAverageDepth(float average_depth_meter); |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
92 static void logbook_SetMinTemperature(float min_temperature_celsius); |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
93 static void logbook_SetMaxCNS(float max_cns_percentage); |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
94 static void logbook_SetCompartmentDesaturation(const SDiveState * pStateReal); |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
95 static void logbook_SetLastStop(float last_stop_depth_bar); |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
96 static void logbook_writedata(void * data, int length_byte); |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
97 static void logbook_UpdateHeader(const SDiveState * pStateReal); |
| 38 | 98 |
| 99 /* Exported functions --------------------------------------------------------*/ | |
| 100 | |
| 101 void logbook_EndDive(void) | |
| 102 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
103 ext_flash_close_new_dive_log((uint8_t*) &gheader); |
| 38 | 104 } |
| 105 | |
| 106 | |
| 107 // =============================================================================== | |
| 108 // logbook_last_totalDiveCount | |
| 109 /// @brief Fix setting issues | |
| 110 /// @date 04-April-2016 | |
| 111 /// | |
| 112 /// @return diveNumber (totalDiveCounter) of latest log entry, 0 if not a valid header | |
| 113 // =============================================================================== | |
| 114 uint16_t logbook_lastDive_diveNumber(void) | |
| 115 { | |
| 116 SLogbookHeader tempLogbookHeader; | |
| 117 if(logbook_getHeader(0, &tempLogbookHeader)) | |
| 118 { | |
| 119 return tempLogbookHeader.diveNumber; | |
| 120 } | |
| 121 else | |
| 122 { | |
| 123 return 0; | |
| 124 } | |
| 125 } | |
| 126 | |
| 127 | |
| 128 /** | |
| 129 ****************************************************************************** | |
| 130 * @brief logbook_getCurrentHeader. / | |
| 281 | 131 * @author heinrichs weikamp |
| 38 | 132 * @version V0.0.1 |
| 133 * @date 22-April-2014 | |
| 134 ****************************************************************************** | |
| 135 * | |
| 136 * @return SLogbookHeader*: | |
| 137 */ | |
| 138 SLogbookHeader* logbook_getCurrentHeader(void) | |
| 139 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
140 return &gheader; |
| 38 | 141 } |
| 142 | |
| 143 /** | |
| 144 ****************************************************************************** | |
| 145 * @brief logbook_getNumberOfHeaders. / | |
| 146 * @author heinrichs weikamp gmbh | |
| 147 * @version V0.0.1 | |
| 148 * @date 18-May-2016 | |
| 149 ****************************************************************************** | |
| 150 * | |
| 151 * @return uint8_t : number of valid headers (0xFAFA) found. | |
| 152 */ | |
| 153 uint8_t logbook_getNumberOfHeaders(void) | |
| 154 { | |
| 155 return ext_flash_count_dive_headers(); | |
| 156 } | |
| 157 | |
| 158 | |
| 159 /** | |
| 160 ****************************************************************************** | |
| 161 * @brief logbook_getHeader. / | |
| 281 | 162 * @author heinrichs weikamp |
| 38 | 163 * @version V0.0.1 |
| 164 * @date 22-April-2014 | |
| 165 ****************************************************************************** | |
| 166 * | |
| 167 * @param StepBackwards : 0 Last lokbook entry, 1 second to last entry, etc. | |
| 168 * @param SSLogbookHeader* pLogbookHeader: Output found LogbookHeader | |
| 169 * @return uint8_t : 1 = success | |
| 170 */ | |
| 171 uint8_t logbook_getHeader(uint8_t StepBackwards,SLogbookHeader* pLogbookHeader) | |
| 172 { | |
| 173 ext_flash_read_dive_header((uint8_t *)pLogbookHeader, StepBackwards); | |
| 174 if(pLogbookHeader->diveHeaderStart != 0xFAFA) | |
| 175 return 0; | |
| 176 else | |
| 177 return 1; | |
| 178 } | |
| 179 | |
| 180 /** | |
| 181 ****************************************************************************** | |
| 182 * @brief logbook_initNewdiveProfile. / | |
| 183 * creates header and smallHeader from diveState and global Settings | |
| 184 * and writes new lookboock entry on flash device | |
| 185 * diveState | |
| 281 | 186 * @author heinrichs weikamp |
| 38 | 187 * @version V0.0.1 |
| 188 * @date 22-April-2014 | |
| 189 ****************************************************************************** | |
| 190 * | |
| 191 * @param SDiveState* pInfo: Input | |
| 192 * @param SSettings* pSettings: Input | |
| 193 */ | |
| 194 | |
| 195 void logbook_initNewdiveProfile(const SDiveState* pInfo, SSettings* pSettings) | |
| 196 { | |
| 197 RTC_DateTypeDef Sdate; | |
| 198 RTC_TimeTypeDef Stime; | |
| 199 | |
| 200 for(int i = 0; i < sizeof(SLogbookHeader); i++) | |
| 201 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
202 ((uint8_t*)(&gheader))[i] = 0; |
| 38 | 203 } |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
204 gheader.diveHeaderStart = 0xFAFA; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
205 gheader.diveHeaderEnd = 0xFBFB; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
206 gheader.samplingRate = 2; |
| 38 | 207 if(pInfo->diveSettings.diveMode == DIVEMODE_OC) |
| 208 { | |
| 209 for(int i = 0; i < 5; i++) | |
| 210 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
211 gheader.gasordil[i].oxygen_percentage = pSettings->gas[i+1].oxygen_percentage; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
212 gheader.gasordil[i].helium_percentage = pSettings->gas[i+1].helium_percentage; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
213 gheader.gasordil[i].note.uw = pSettings->gas[i+1].note.uw; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
214 gheader.gasordil[i].depth_meter = pSettings->gas[i+1].depth_meter; |
| 38 | 215 } |
| 216 } | |
| 217 else | |
| 218 { | |
| 219 for(int i = 0; i < 5; i++) | |
| 220 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
221 gheader.gasordil[i].oxygen_percentage = pSettings->gas[i+6].oxygen_percentage; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
222 gheader.gasordil[i].helium_percentage = pSettings->gas[i+6].helium_percentage; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
223 gheader.gasordil[i].note.uw = pSettings->gas[i+6].note.uw; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
224 gheader.gasordil[i].depth_meter = pSettings->gas[i+6].depth_meter; |
| 38 | 225 } |
| 226 | |
| 227 for(int i = 0; i < 5; i++) | |
| 228 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
229 gheader.setpoint[i].setpoint_cbar = pSettings->setpoint[i+1].setpoint_cbar; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
230 gheader.setpoint[i].depth_meter = pSettings->setpoint[i+1].depth_meter; |
| 38 | 231 } |
| 232 } | |
| 233 // header.gasordil[pInfo->lifeData.actualGas.GasIdInSettings].depth_meter = 0; | |
| 234 | |
| 235 translateDate(pInfo->lifeData.dateBinaryFormat, &Sdate); | |
| 236 translateTime(pInfo->lifeData.timeBinaryFormat, &Stime); | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
237 gheader.dateYear = Sdate.Year; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
238 gheader.dateMonth = Sdate.Month; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
239 gheader.dateDay = Sdate.Date; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
240 gheader.timeHour = Stime.Hours; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
241 gheader.timeMinute = Stime.Minutes; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
242 gheader.cnsAtBeginning = (uint16_t)pInfo->lifeData.cns; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
243 gheader.surfacePressure_mbar = (uint16_t)(pInfo->lifeData.pressure_surface_bar * 1000); |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
244 gheader.firmwareVersionHigh = firmwareVersion_16bit_high(); |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
245 gheader.firmwareVersionLow = firmwareVersion_16bit_low(); |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
246 gheader.logbookProfileVersion = LOGBOOK_VERSION; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
247 gheader.salinity = pSettings->salinity; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
248 gheader.diveNumber = pSettings->totalDiveCounter; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
249 gheader.personalDiveCount = pSettings->personalDiveCount; |
| 38 | 250 |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
251 gheader.diveMode = pInfo->diveSettings.diveMode; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
252 gheader.CCRmode = pInfo->diveSettings.CCR_Mode; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
253 gheader.lastDecostop_m = pSettings->last_stop_depth_meter; |
| 38 | 254 |
| 255 if(pInfo->diveSettings.deco_type.ub.standard == GF_MODE) | |
| 256 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
257 gheader.decoModel = 1; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
258 gheader.gfLow_or_Vpm_conservatism = pInfo->diveSettings.gf_low; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
259 gheader.gfHigh = pInfo->diveSettings.gf_high; |
| 38 | 260 } |
| 261 else | |
| 262 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
263 gheader.decoModel = 2; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
264 gheader.gfLow_or_Vpm_conservatism = pInfo->diveSettings.vpm_conservatism; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
265 gheader.gfHigh = 0; |
| 38 | 266 } |
| 267 | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
268 memcpy(gheader.n2Compartments, pInfo->lifeData.tissue_nitrogen_bar, 64); |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
269 memcpy(gheader.heCompartments, pInfo->lifeData.tissue_helium_bar, 64); |
| 38 | 270 |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
271 logbook_SetCompartmentDesaturation(pInfo); |
| 38 | 272 |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
273 ext_flash_start_new_dive_log_and_set_actualPointerSample((uint8_t*)&gheader); |
| 38 | 274 |
| 275 smallHeader.profileLength[0] = 0xFF; | |
| 276 smallHeader.profileLength[1] = 0xFF; | |
| 277 smallHeader.profileLength[2] = 0xFF; | |
| 278 smallHeader.samplingRate_seconds = 2; | |
| 279 smallHeader.numDivisors = 7; | |
| 280 | |
| 281 smallHeader.tempType = 0; | |
| 282 smallHeader.tempLength = 2; | |
| 283 smallHeader.tempDivisor = 6; | |
| 284 | |
| 285 smallHeader.deco_ndlType = 1; | |
| 286 smallHeader.deco_ndlLength = 2; | |
| 287 smallHeader.deco_ndlDivisor = 6; //= 6; | |
| 288 | |
| 289 /* GF in % at actual position */ | |
| 290 smallHeader.gfType = 2; | |
| 291 smallHeader.gfLength = 1; | |
| 292 smallHeader.gfDivisor = 0; //12; | |
| 293 | |
| 294 /* 3 Sensors: 8bit ppO2 in 0.01bar, 16bit voltage in 0,1mV */ | |
| 295 smallHeader.ppo2Type = 3; | |
| 296 smallHeader.ppo2Length = 9; | |
| 297 smallHeader.ppo2Divisor = 2; //2 | |
| 298 | |
| 299 /* last 15 stops in minutes (last, second_to_last, ... */ | |
| 300 /* last stop depth is defined in header */ | |
| 301 smallHeader.decoplanType = 4; | |
| 302 smallHeader.decoplanLength = 15; | |
| 303 smallHeader.decoplanDivisor = 12;//12; | |
| 304 | |
| 305 smallHeader.cnsType = 5; | |
| 306 smallHeader.cnsLength = 2; | |
| 307 smallHeader.cnsDivisor = 12; | |
| 308 | |
| 309 smallHeader.tankType = 6; | |
| 310 smallHeader.tankLength = 0; | |
| 311 smallHeader.tankDivisor = 0; | |
| 312 | |
| 313 logbook_writedata((void *) &smallHeader,sizeof(smallHeader)); | |
| 314 | |
| 315 clear_divisor(); | |
| 316 } | |
| 317 | |
| 318 /** | |
| 319 ****************************************************************************** | |
| 320 * @brief clear_divisor / clears divisor struct | |
| 281 | 321 * @author heinrichs weikamp |
| 38 | 322 * @version V0.0.1 |
| 323 * @date 22-April-2014 | |
| 324 ****************************************************************************** | |
| 325 * | |
| 326 */ | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
327 static void clear_divisor(void) |
| 38 | 328 { |
| 329 divisor.cns = smallHeader.cnsDivisor - 1; | |
| 330 divisor.decoplan = smallHeader.decoplanDivisor - 1; | |
| 331 divisor.deco_ndl = smallHeader.deco_ndlDivisor - 1; | |
| 332 divisor.gradientFactor = smallHeader.gfDivisor -1 ; | |
| 333 divisor.ppo2 = smallHeader.ppo2Divisor - 1; | |
| 334 divisor.tank = smallHeader.tankDivisor - 1; | |
| 335 divisor.temperature = smallHeader.tempDivisor - 1; | |
| 336 } | |
| 337 | |
| 338 | |
| 339 /** | |
| 340 ****************************************************************************** | |
| 341 * @brief add16. / adds 16 bit variable to 8 bit array | |
| 281 | 342 * @author heinrichs weikamp |
| 38 | 343 * @version V0.0.1 |
| 344 * @date 22-April-2014 | |
| 345 ****************************************************************************** | |
| 346 * | |
| 347 * @param uint8_t *pos: Output 8 bit array | |
| 348 * @param uint16_t var: 16 bit variable | |
| 349 */ | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
350 static void addU16(uint8_t *pos, uint16_t var) |
| 38 | 351 { |
| 352 *((uint16_t*)pos) = var; | |
| 353 } | |
| 354 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
355 static void addS16(uint8_t *pos, int16_t var) |
| 38 | 356 { |
| 357 *((int16_t*)pos) = var; | |
| 358 } | |
| 359 | |
| 360 /** | |
| 361 ****************************************************************************** | |
| 362 * @brief logbook_writeSample. / Writes one logbook sampl | |
| 281 | 363 * @author heinrichs weikamp |
| 38 | 364 * @date 22-April-2014 |
| 365 * @version V0.0.2 | |
| 366 * @since 20-June-2016 | |
| 367 * @bug Deco/NDL Status fixed in V0.0.2 | |
| 368 | |
| 369 | |
| 370 ****************************************************************************** | |
| 371 * | |
| 372 * @param SDiveState state: | |
| 373 */ | |
| 374 | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
375 void logbook_writeSample(const SDiveState *state) |
| 38 | 376 { |
| 377 uint8_t sample[256]; | |
| 378 // int position = 0; | |
| 379 int length = 0; | |
| 380 // _Bool bEvent = 0; | |
| 381 uint8_t nextstopDepthMeter = 0; | |
| 382 uint16_t nextstopLengthSeconds = 0; | |
| 383 uint8_t nextstopLengthMinutes = 0; | |
| 384 bit8_Type eventByte1, eventByte2; | |
| 385 bit8_Type profileByteFlag; | |
| 386 int i = 0; | |
| 387 for(i = 0; i <256 ;i++) | |
| 388 sample[i] = 0; | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
389 addU16(sample, (uint16_t)(state->lifeData.depth_meter * 100)); |
| 38 | 390 length += 2; |
| 391 sample[2] = 0; | |
| 392 length++; | |
| 393 eventByte1.uw = 0; | |
| 394 eventByte2.uw = 0; | |
| 395 //uint16_t tmpU16 = 0; | |
|
130
b7689d9e888a
Minor changes to improved code quality and to eliminate warnings
Ideenmodellierer
parents:
38
diff
changeset
|
396 const SDecoinfo * pDecoinfo; // new hw 160620 |
| 38 | 397 |
| 398 //BuildEevntyte 1 | |
| 399 // sub old 0-3 only one at a time | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
400 if(state->events.manualMarker) |
| 38 | 401 { |
| 402 eventByte1.uw = 6; | |
| 403 } | |
| 404 else | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
405 if(state->warnings.decoMissed) |
| 38 | 406 { |
| 407 eventByte1.uw = 2; | |
| 408 } | |
| 409 else | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
410 if(state->warnings.ppO2Low) |
| 38 | 411 { |
| 412 eventByte1.uw = 4; | |
| 413 } | |
| 414 else | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
415 if(state->warnings.ppO2High) |
| 38 | 416 { |
| 417 eventByte1.uw = 5; | |
| 418 } | |
| 419 else | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
420 if(state->warnings.lowBattery) |
| 38 | 421 { |
| 422 eventByte1.uw = 7; | |
| 423 } | |
| 424 else | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
425 if(state->warnings.slowWarning) |
| 38 | 426 { |
| 427 eventByte1.uw = 1; | |
| 428 } | |
| 429 // sub bit 4 to 7 | |
| 281 | 430 if(state->events.manualGasSet) |
| 38 | 431 { |
| 432 eventByte1.ub.bit4 = 1; | |
| 433 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
434 if(state->events.gasChange) |
| 38 | 435 { |
| 436 eventByte1.ub.bit5 = 1; | |
| 437 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
438 if(state->events.setpointChange) |
| 38 | 439 { |
| 440 eventByte1.ub.bit6 = 1; | |
| 441 } | |
| 442 // sub bit 7 + eventbyte2 | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
443 if(state->events.bailout) |
| 38 | 444 { |
| 445 eventByte1.ub.bit7 = 1; | |
| 446 eventByte2.ub.bit0 = 1; | |
| 447 } | |
| 448 //Add EventByte 1 | |
| 449 if(eventByte1.uw > 0) | |
| 450 { | |
| 451 sample[length] = eventByte1.uw; | |
| 452 length++; | |
| 453 } | |
| 454 if(eventByte2.uw > 0) | |
| 455 { | |
| 456 sample[length] = eventByte2.uw; | |
| 457 length++; | |
| 458 } | |
| 459 //Add EventInfos | |
| 281 | 460 if(state->events.manualGasSet) |
| 38 | 461 { |
| 462 //manual gas in %O2 & %He | |
| 281 | 463 sample[length] = state->events.info_manualGasSetO2; |
| 38 | 464 length += 1; |
| 281 | 465 sample[length] = state->events.info_manualGasSetHe; |
| 38 | 466 length += 1; |
| 467 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
468 if(state->events.gasChange) |
| 38 | 469 { |
| 470 //Current gas (gasid) | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
471 sample[length] = state->events.info_GasChange; |
| 38 | 472 length += 1; |
| 473 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
474 if(state->events.setpointChange) |
| 38 | 475 { |
| 476 //New setpoint in cbar | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
477 sample[length] = state->events.info_SetpointChange; |
| 38 | 478 length += 1; |
| 479 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
480 if(state->events.bailout) |
| 38 | 481 { |
| 482 //bailout gas in % O2 & %He | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
483 sample[length] = state->events.info_bailoutO2; |
| 38 | 484 length += 1; |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
485 sample[length] = state->events.info_bailoutHe; |
| 38 | 486 length += 1; |
| 487 } | |
| 488 | |
| 489 | |
| 490 if(divisor.temperature == 0) | |
| 491 { | |
| 492 divisor.temperature = smallHeader.tempDivisor - 1; | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
493 addS16(&sample[length], (int16_t)((state->lifeData.temperature_celsius * 10.0f) + 0.5f)); |
| 38 | 494 length += 2; |
| 495 } | |
| 496 else | |
| 497 { | |
| 498 divisor.temperature--; | |
| 499 } | |
| 500 | |
| 501 | |
| 502 if(smallHeader.deco_ndlDivisor > 0) | |
| 503 { | |
| 504 if(divisor.deco_ndl == 0) | |
| 505 { | |
| 506 divisor.deco_ndl = smallHeader.deco_ndlDivisor - 1; | |
| 507 | |
| 508 if(stateUsed->diveSettings.deco_type.ub.standard == GF_MODE) | |
| 509 pDecoinfo = &stateUsed->decolistBuehlmann; | |
| 510 else if(stateUsed->diveSettings.deco_type.ub.standard == VPM_MODE) | |
| 511 pDecoinfo = &stateUsed->decolistVPM; | |
| 512 else // should not happen as only GF and VPM at the moment | |
| 513 { | |
| 514 sample[length] = 0; | |
| 515 length += 1; | |
| 516 sample[length] = 0; | |
| 517 length += 1; | |
| 518 } | |
| 519 | |
| 520 if(pDecoinfo->output_ndl_seconds > 0) | |
| 521 { | |
| 522 sample[length] = 0; | |
| 523 length += 1; | |
|
283
04cdeff80254
Bugfix: write NDL in logbook correctly
Jan Mulder <jlmulder@xs4all.nl>
parents:
281
diff
changeset
|
524 sample[length] = (uint8_t)(pDecoinfo->output_ndl_seconds / 60); |
| 281 | 525 |
| 526 // Limit stored sample within 0 to 240 mins (Since it's 8bit UINT only) | |
| 527 if ((pDecoinfo->output_ndl_seconds / 60) > 240) sample[length] = 240; | |
| 528 if ((pDecoinfo->output_ndl_seconds / 60) < 0) sample[length] = 0; | |
| 529 | |
| 38 | 530 length += 1; |
| 531 } | |
| 532 else if(pDecoinfo->output_time_to_surface_seconds) | |
| 533 { | |
| 534 tHome_findNextStop(pDecoinfo->output_stop_length_seconds, &nextstopDepthMeter, &nextstopLengthSeconds); | |
| 535 nextstopLengthMinutes = (nextstopLengthSeconds +59 ) / 60; | |
| 536 | |
| 537 sample[length] = nextstopDepthMeter; | |
| 538 length += 1; | |
| 539 sample[length] = nextstopLengthMinutes; | |
| 540 length += 1; | |
| 541 } | |
| 542 else | |
| 543 { | |
| 544 sample[length] = 0; | |
| 545 length += 1; | |
| 546 sample[length] = 0; | |
| 547 length += 1; | |
| 548 } | |
| 549 } | |
| 550 else | |
| 551 { | |
| 552 divisor.deco_ndl --; | |
| 553 } | |
| 554 } | |
| 555 | |
| 556 | |
| 557 if(smallHeader.ppo2Divisor) | |
| 558 { | |
| 559 if(divisor.ppo2 == 0) | |
| 560 { | |
| 561 divisor.ppo2 = smallHeader.ppo2Divisor - 1; | |
| 562 | |
| 563 for(int i = 0; i <3; i++) | |
| 564 { | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
565 sample[length] = (uint8_t)(state->lifeData.ppO2Sensor_bar[i] * 100.0f + 0.5f); |
| 38 | 566 length += 1; |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
567 addU16(&sample[length], (uint16_t)(state->lifeData.sensorVoltage_mV[i] * 10.0f + 0.5f)); |
| 38 | 568 length += 2; |
| 569 } | |
| 570 } | |
| 571 else | |
| 572 { | |
| 573 divisor.ppo2--; | |
| 574 } | |
| 575 } | |
| 576 | |
| 577 | |
| 578 if(smallHeader.decoplanDivisor) | |
| 579 { | |
| 580 if(divisor.decoplan == 0) | |
| 581 { | |
| 582 divisor.decoplan = smallHeader.decoplanDivisor - 1; | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
583 if(state->diveSettings.deco_type.ub.standard == VPM_MODE) |
| 38 | 584 { |
| 585 for(int i = 0; i <15; i++) | |
| 586 { | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
587 sample[length] = state->decolistVPM.output_stop_length_seconds[i] / 60; |
| 38 | 588 length += 1; |
| 589 } | |
| 590 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
591 else if(state->diveSettings.deco_type.ub.standard == GF_MODE) |
| 38 | 592 { |
| 593 for(int i = 0; i <15; i++) | |
| 594 { | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
595 sample[length] = state->decolistBuehlmann.output_stop_length_seconds[i] / 60; |
| 38 | 596 length += 1; |
| 597 } | |
| 598 } | |
| 599 else | |
| 600 { | |
| 601 for(int i = 0; i <15; i++) | |
| 602 { | |
| 603 sample[length] = 0; | |
| 604 length += 1; | |
| 605 } | |
| 606 } | |
| 607 // add16(&sample[length], state.temperature); | |
| 608 //length += 2; | |
| 609 } | |
| 610 else | |
| 611 { | |
| 612 divisor.decoplan --; | |
| 613 } | |
| 614 } | |
| 615 if(divisor.cns == 0) | |
| 616 { | |
| 617 divisor.cns = smallHeader.cnsDivisor - 1; | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
618 addU16(&sample[length], (uint16_t)state->lifeData.cns); |
| 38 | 619 length += 2; |
| 620 } | |
| 621 else | |
| 622 { | |
| 623 divisor.cns--; | |
| 624 } | |
| 625 | |
| 626 profileByteFlag.uw = length - 3; | |
| 627 if(eventByte1.uw) | |
| 628 { | |
| 629 profileByteFlag.ub.bit7 = 1; | |
| 630 } | |
| 631 sample[2] = profileByteFlag.uw; | |
| 632 logbook_writedata((void *) sample,length); | |
| 633 | |
| 634 } | |
| 635 | |
| 636 /** | |
| 637 ****************************************************************************** | |
| 638 * @brief readSample. / Reads data of one logbook sample | |
| 281 | 639 * @author heinrichs weikamp |
| 38 | 640 * @version V0.0.1 |
| 641 * @date 22-April-2014 | |
| 642 ****************************************************************************** | |
| 643 * | |
| 644 * @param int32_t* depth: output Value | |
| 645 * @param int16_t * gasid: output Value | |
| 646 * @param int32_t* temperature: output Value | |
| 647 * @param int32_t* sensor1, sensor2, sensor3: output Value | |
| 648 * @param int32_t* cns: output Value | |
| 649 * @return bytes read / 0 = reading Error | |
| 650 */ | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
651 static uint16_t readSample(int32_t* depth, int16_t * gasid, int16_t* setpoint_cbar, int32_t* temperature, int32_t* sensor1, int32_t* sensor2, int32_t* sensor3, int32_t* cns, SManualGas* manualGas, int16_t* bailout, int16_t* decostopDepth) |
| 38 | 652 { |
| 653 int length = 0; | |
| 654 _Bool bEvent = 0; | |
| 655 bit8_Type eventByte1, eventByte2; | |
| 656 bit8_Type profileByteFlag; | |
| 657 | |
| 658 eventByte1.uw = 0; | |
| 659 eventByte2.uw = 0; | |
| 660 uint8_t tempU8 = 0; | |
| 661 uint16_t temp = 0; | |
| 662 uint16_t bytesRead = 0; | |
| 663 | |
| 664 if(gasid) | |
| 665 *gasid = -1; | |
| 666 if(temperature) | |
| 667 *temperature = -1000; | |
| 668 if(sensor1) | |
| 669 *sensor1 = -1; | |
| 670 if(sensor2) | |
| 671 *sensor2 = -1; | |
| 672 if(sensor3) | |
| 673 *sensor3 = -1; | |
| 674 if(cns) | |
| 675 *cns = -1; | |
| 676 if(setpoint_cbar) | |
| 677 *setpoint_cbar = -1; | |
| 678 if(bailout) | |
| 679 *bailout = -1; | |
| 680 if(manualGas) | |
| 681 { | |
| 682 manualGas->percentageO2 =-1; | |
| 683 manualGas->percentageHe =-1; | |
| 684 } | |
| 685 if(decostopDepth) | |
| 686 *decostopDepth = -1; | |
| 687 | |
| 688 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); | |
| 689 if(depth) | |
| 690 *depth = (int32_t)temp; | |
| 691 bytesRead += 2; | |
| 692 | |
| 693 ext_flash_read_next_sample_part( &profileByteFlag.uw, 1); | |
| 694 bytesRead ++; | |
| 695 | |
| 696 bEvent = profileByteFlag.ub.bit7; | |
| 697 profileByteFlag.ub.bit7 = 0; | |
| 698 length = profileByteFlag.uw; | |
| 699 | |
| 700 if(bEvent) | |
| 701 { | |
| 702 ext_flash_read_next_sample_part( &eventByte1.uw, 1); | |
| 703 bytesRead ++; | |
| 704 | |
| 705 length--; | |
| 706 | |
| 707 //second event byte | |
| 708 if(eventByte1.ub.bit7) | |
| 709 { | |
| 710 ext_flash_read_next_sample_part( &eventByte2.uw, 1); | |
| 711 bytesRead ++; | |
| 712 length--; | |
| 713 } | |
| 714 else | |
| 715 { | |
| 716 eventByte2.uw = 0; | |
| 717 } | |
| 718 | |
| 719 //manual Gas Set | |
| 720 if( eventByte1.ub.bit4) | |
| 721 { | |
| 722 //Evaluate manual Gas | |
| 723 ext_flash_read_next_sample_part( (uint8_t*)&tempU8, 1); | |
| 724 bytesRead +=1; | |
| 725 length -= 1; | |
| 726 manualGas->percentageO2 = tempU8; | |
| 727 ext_flash_read_next_sample_part( (uint8_t*)&tempU8, 1); | |
| 728 bytesRead +=1; | |
| 729 length -= 1; | |
| 730 manualGas->percentageHe = tempU8; | |
| 731 if(gasid) | |
| 732 *gasid = 0; | |
| 733 } | |
| 734 //gas change | |
| 735 if( eventByte1.ub.bit5) | |
| 736 { | |
| 737 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 738 bytesRead +=1; | |
| 739 length -= 1; | |
| 740 if(gasid) | |
| 741 *gasid = (uint16_t)tempU8; | |
| 742 } | |
| 743 //SetpointChange | |
| 744 if( eventByte1.ub.bit6) | |
| 745 { | |
| 746 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 747 *setpoint_cbar = tempU8; | |
| 748 bytesRead +=1; | |
| 749 length -= 1; | |
| 750 } | |
| 751 | |
| 752 // second event Byte | |
| 753 //bailout | |
|
298
50c26a4442af
Bugfix: fix drawing of CCR bailout profile
Jan Mulder <jlmulder@xs4all.nl>
parents:
283
diff
changeset
|
754 if(eventByte2.ub.bit0) |
| 38 | 755 { |
| 756 //evaluate bailout gas Gas | |
| 757 *bailout = 1; | |
| 758 | |
| 759 ext_flash_read_next_sample_part( (uint8_t*)&tempU8, 1); | |
| 760 bytesRead +=1; | |
| 761 length -= 1; | |
| 762 manualGas->percentageO2 = tempU8; | |
| 763 ext_flash_read_next_sample_part( (uint8_t*)&tempU8, 1); | |
| 764 bytesRead +=1; | |
| 765 length -= 1; | |
| 766 manualGas->percentageHe = tempU8; | |
| 767 | |
| 768 if(gasid) | |
| 769 *gasid = 0; | |
| 770 } | |
| 771 } | |
| 772 | |
| 773 if(divisor.temperature == 0) | |
| 774 { | |
| 775 divisor.temperature = smallHeader.tempDivisor - 1; | |
| 776 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); | |
| 777 bytesRead +=2; | |
| 778 length -= 2; | |
| 779 if(temperature) | |
| 780 { | |
| 781 *temperature = (int32_t)temp; | |
| 782 } | |
| 783 } | |
| 784 else | |
| 785 { | |
| 786 divisor.temperature--; | |
| 787 } | |
| 788 | |
| 789 if(smallHeader.deco_ndlDivisor > 0) | |
| 790 { | |
| 791 if(divisor.deco_ndl == 0) | |
| 792 { | |
| 793 divisor.deco_ndl = smallHeader.deco_ndlDivisor - 1; | |
| 794 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 795 if(decostopDepth) | |
| 796 { | |
| 797 *decostopDepth = tempU8 * 100; | |
| 798 } | |
| 799 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 800 bytesRead += 2; | |
| 801 length -= 2; | |
| 802 } | |
| 803 else | |
| 804 { | |
| 805 divisor.deco_ndl--; | |
| 806 } | |
| 807 } | |
| 808 | |
| 809 if(divisor.ppo2 == 0) | |
| 810 { | |
| 811 int32_t ppO2Tmp = 0; | |
| 812 divisor.ppo2 = smallHeader.ppo2Divisor -1; | |
| 813 for(int i = 0; i <3 ; i++) | |
| 814 { | |
| 815 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 816 ppO2Tmp += tempU8; | |
| 817 bytesRead +=1; | |
| 818 length -= 1; | |
| 819 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); | |
| 820 bytesRead +=2; | |
| 821 length -= 2; | |
| 822 if(sensor1 && (i==0)) | |
| 823 *sensor1 = (((int32_t)tempU8) * 0xFFFF) + temp; | |
| 824 if(sensor2 && (i==1)) | |
| 825 *sensor2 = (((int32_t)tempU8) * 0xFFFF) + temp; | |
| 826 if(sensor3 && (i==2)) | |
| 827 *sensor3 = (((int32_t)tempU8) * 0xFFFF) + temp; | |
| 828 } | |
| 829 } | |
| 830 else | |
| 831 { | |
| 832 divisor.ppo2--; | |
| 833 } | |
| 834 | |
| 835 if(smallHeader.decoplanDivisor > 0) | |
| 836 { | |
| 837 if(divisor.decoplan == 0) | |
| 838 { | |
| 839 divisor.decoplan = smallHeader.decoplanDivisor - 1; | |
| 840 for(int i = 0; i <15; i++) | |
| 841 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 842 bytesRead += 15; | |
| 843 length -= 15; | |
| 844 } | |
| 845 else | |
| 846 { | |
| 847 divisor.decoplan--; | |
| 848 } | |
| 849 } | |
| 850 | |
| 851 | |
| 852 | |
| 853 if(divisor.cns == 0) | |
| 854 { | |
| 855 divisor.cns = smallHeader.cnsDivisor - 1; | |
| 856 | |
| 857 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); | |
| 858 bytesRead +=2; | |
| 859 length -= 2; | |
| 860 if(cns) | |
| 861 { | |
| 862 *cns = (int32_t)temp; | |
| 863 } | |
| 864 } | |
| 865 else | |
| 866 { | |
| 867 divisor.cns--; | |
| 868 } | |
| 869 | |
| 870 if (length != 0) | |
| 871 return 0; | |
| 872 | |
| 873 return bytesRead; | |
| 874 } | |
| 875 /** | |
| 876 ****************************************************************************** | |
| 877 * @brief logbook_readSampleData. / Reads sample data of whole logbook entry | |
| 281 | 878 * @author heinrichs weikamp |
| 38 | 879 * @version V0.0.1 |
| 880 * @date 22-April-2014 | |
| 881 ****************************************************************************** | |
| 882 * | |
| 883 * @param uint8_t StepBackwards: witch lookbook entry? | |
| 884 * @param uint16_t length : maxlength of output arrays | |
| 885 * @param int32_t* depth : output array | |
| 886 * @param int16_t * gasid : output array | |
| 887 * @param int32_t* temperature : output array | |
| 888 * @param int32_t* ppo2 : output array | |
| 889 * @param int32_t* cns : output array | |
| 890 * @return length of output | |
| 891 */ | |
| 892 uint16_t logbook_readSampleData(uint8_t StepBackwards, uint16_t length,uint16_t* depth, uint8_t* gasid, int16_t* temperature, uint16_t* ppo2, uint16_t* setpoint, uint16_t* sensor1, uint16_t* sensor2, uint16_t* sensor3, uint16_t* cns, uint8_t* bailout, uint16_t* decostopDepth) | |
| 893 { | |
| 894 //Test read | |
| 895 //SLogbookHeader header; | |
| 896 | |
| 897 //logbook_getHeader(&header); | |
| 898 SLogbookHeader header; | |
| 899 int iNum; | |
| 900 int firstgasid = 0; | |
| 901 int retVal = 0; | |
| 902 int compression = 0; | |
| 903 int i; | |
| 904 // uint32_t diveTime_seconds; | |
| 905 int32_t depthVal = 0; | |
| 906 int16_t gasidVal = 0; | |
| 907 int16_t setPointVal = 0; | |
| 908 int16_t bailoutVal = 0; | |
| 909 int16_t bailoutLast = 0; | |
| 910 uint16_t setPointLast = 0; | |
| 911 int32_t temperatureVal = 0; | |
| 912 int32_t sensor1Val = 0; | |
| 913 int32_t sensor2Val = 0; | |
| 914 int32_t sensor3Val = 0; | |
| 915 int32_t sensor1Last = 0; | |
| 916 int32_t sensor2Last = 0; | |
| 917 int32_t sensor3Last = 0; | |
| 918 int32_t cnsVal = 0; | |
| 919 int32_t depthLast = 0; | |
| 920 int16_t gasidLast = 0; | |
| 921 int32_t temperatureLast = 0; | |
| 922 int32_t temperatureFirst = 0; | |
| 923 int32_t cnsLast = 0; | |
| 924 int16_t decostepDepthVal = 0; | |
| 925 int16_t decostepDepthLast = 0; | |
| 926 | |
| 927 SManualGas manualGasVal; | |
| 928 SManualGas manualGasLast; | |
| 929 manualGasLast.percentageO2 = 0; | |
| 930 manualGasLast.percentageHe = 0; | |
| 931 | |
| 932 float ambiant_pressure_bar = 0; | |
| 933 float ppO2 = 0; | |
| 934 ext_flash_read_dive_header((uint8_t*)&header, StepBackwards); | |
| 935 for(i = 0;i< 5;i++) | |
| 936 { | |
| 937 if(header.gasordil[i].note.ub.first) | |
| 938 break; | |
| 939 } | |
| 940 firstgasid = i + 1; | |
| 941 if(header.diveMode == DIVEMODE_CCR) | |
| 942 setPointLast = header.setpoint[0].setpoint_cbar; | |
| 943 else | |
| 944 setPointLast = 0; | |
| 945 //diveTime_seconds = header.diveTime_seconds ; | |
| 946 for(compression = 1; compression < 100; compression ++) | |
| 947 { | |
| 948 if((header.total_diveTime_seconds / header.samplingRate)/compression <= length) | |
| 949 break; | |
| 950 } | |
| 951 | |
| 952 | |
| 953 for(i = 0;i< length;i++) | |
| 954 { | |
| 955 if(depth) | |
| 956 depth[i] = 0; | |
| 957 if(temperature) | |
| 958 temperature[i] = 0; | |
| 959 if(gasid) | |
| 960 gasid[i] = 0; | |
| 961 if(ppo2) | |
| 962 ppo2[i] = 0; | |
| 963 if(setpoint) | |
| 964 setpoint[i] = 0; | |
| 965 if(sensor1) | |
| 966 sensor1[i] = 0; | |
| 967 if(sensor2) | |
| 968 sensor2[i] = 0; | |
| 969 if(sensor3) | |
| 970 sensor3[i] = 0; | |
| 971 if(cns) | |
| 972 cns[i] = 0; | |
| 973 } | |
| 974 //We start with fist gasid | |
| 975 gasidLast = firstgasid; | |
| 976 | |
| 977 | |
| 978 //uint16_t* ppo2, uint16_t* cns# | |
| 979 uint32_t totalNumberOfBytes = 0; | |
| 980 uint32_t bytesRead = 0; | |
| 981 ext_flash_open_read_sample( StepBackwards,&totalNumberOfBytes); | |
| 982 ext_flash_read_next_sample_part((uint8_t*)&smallHeader, sizeof(SSmallHeader)); | |
| 983 bytesRead += sizeof(SSmallHeader); | |
| 984 | |
| 985 clear_divisor(); | |
| 986 | |
| 987 iNum = 0; | |
| 988 int counter = 0; | |
| 989 temperatureLast = -1000; | |
| 990 while ((bytesRead < totalNumberOfBytes) && (iNum < length)) | |
| 991 { | |
| 992 ext_flash_set_entry_point(); | |
| 993 divisorBackup = divisor; | |
| 994 retVal = readSample(&depthVal,&gasidVal, &setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, &decostepDepthVal); | |
| 995 | |
| 996 if(retVal == 0) | |
| 997 { | |
| 998 //Error try to read again!!! | |
| 999 ext_flash_reopen_read_sample_at_entry_point(); | |
| 1000 divisor = divisorBackup; | |
| 1001 retVal = readSample(&depthVal,&gasidVal,&setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, &decostepDepthVal); | |
| 1002 | |
| 1003 if(retVal == 0) | |
| 1004 break; | |
| 1005 } | |
| 1006 bytesRead +=retVal; | |
| 1007 | |
| 1008 //if for some variable no new value is in the sample for (z.B. gasidVal = -1), we take the last value | |
| 1009 if(depthVal == -1) | |
| 1010 depthVal = depthLast; | |
| 1011 else | |
| 1012 depthLast = depthVal; | |
| 1013 | |
| 1014 if(gasidVal == -1) | |
| 1015 gasidVal = gasidLast; | |
| 1016 else | |
| 1017 gasidLast = gasidVal; | |
| 1018 | |
| 1019 if(temperatureVal == -1000) | |
| 1020 temperatureVal = temperatureLast; | |
| 1021 else | |
| 1022 { | |
| 1023 if(temperatureLast == -1000) | |
| 1024 temperatureFirst = temperatureVal; | |
| 1025 temperatureLast = temperatureVal; | |
| 1026 } | |
| 1027 | |
| 1028 if(setPointVal == -1) | |
| 1029 setPointVal = setPointLast; | |
| 1030 else | |
| 1031 setPointLast = setPointVal; | |
| 1032 | |
| 1033 if(sensor1Val == -1) | |
| 1034 sensor1Val = sensor1Last; | |
| 1035 else | |
| 1036 sensor1Last = sensor1Val; | |
| 1037 | |
| 1038 if(sensor2Val == -1) | |
| 1039 sensor2Val = sensor2Last; | |
| 1040 else | |
| 1041 sensor2Last = sensor2Val; | |
| 1042 | |
| 1043 if(sensor3Val == -1) | |
| 1044 sensor3Val = sensor3Last; | |
| 1045 else | |
| 1046 sensor3Last = sensor3Val; | |
| 1047 | |
| 1048 if(cnsVal == -1) | |
| 1049 cnsVal = cnsLast; | |
| 1050 else | |
| 1051 cnsLast = cnsVal; | |
| 1052 | |
| 1053 if(manualGasVal.percentageO2 == -1) | |
| 1054 manualGasVal = manualGasLast; | |
| 1055 else | |
| 1056 manualGasLast = manualGasVal; | |
| 1057 | |
| 1058 if(bailoutVal == -1) | |
| 1059 bailoutVal = bailoutLast; | |
| 1060 else | |
| 1061 bailoutLast = bailoutVal; | |
| 1062 | |
| 1063 if(decostepDepthVal == -1) | |
| 1064 decostepDepthVal = decostepDepthLast; | |
| 1065 else | |
| 1066 decostepDepthLast = decostepDepthVal; | |
| 1067 | |
| 1068 counter++; | |
| 1069 // Heed compression | |
| 1070 // Write here to arrays | |
| 1071 if(counter == compression) | |
| 1072 { | |
| 1073 if(depth) | |
| 1074 depth[iNum] = depthVal; | |
| 1075 if(gasid) | |
| 1076 gasid[iNum] = gasidVal; | |
| 1077 if(temperature) | |
| 1078 temperature[iNum] = temperatureVal; | |
| 1079 if(cns) | |
| 1080 cns[iNum] = cnsVal; | |
| 1081 if(bailout) | |
| 1082 bailout[iNum] = bailoutVal; | |
| 1083 if(decostopDepth) | |
| 1084 decostopDepth[iNum] = decostepDepthVal; | |
| 1085 | |
| 1086 if(ppo2) | |
| 1087 { | |
| 1088 //Calc ppo2 - Values | |
| 1089 SGas gas; | |
| 1090 gas.setPoint_cbar = setPointVal; | |
| 1091 if(gasidVal > 0) | |
| 1092 { | |
| 1093 gas.helium_percentage = header.gasordil[gasidVal - 1].helium_percentage; | |
| 1094 gas.nitrogen_percentage = 100 - gas.helium_percentage - header.gasordil[gasidVal - 1].oxygen_percentage; | |
| 1095 } | |
| 1096 else | |
| 1097 { | |
| 1098 gas.helium_percentage = manualGasVal.percentageHe; | |
| 1099 gas.nitrogen_percentage = 100 - gas.helium_percentage - manualGasVal.percentageO2; | |
| 1100 } | |
| 1101 ambiant_pressure_bar =((float)(depthVal + header.surfacePressure_mbar))/1000; | |
| 1102 ppO2 = decom_calc_ppO2(ambiant_pressure_bar, &gas ); | |
| 1103 ppo2[iNum] = (uint16_t) ( ppO2 * 100); | |
| 1104 } | |
| 1105 | |
| 1106 if(setpoint) | |
| 1107 setpoint[iNum] = setPointVal; | |
| 1108 | |
| 1109 if(sensor1) | |
| 1110 sensor1[iNum] = (sensor1Val / 0xFFFF) & 0xFF; | |
| 1111 if(sensor2) | |
| 1112 sensor2[iNum] = (sensor2Val / 0xFFFF) & 0xFF; | |
| 1113 if(sensor3) | |
| 1114 sensor3[iNum] = (sensor3Val / 0xFFFF) & 0xFF; | |
| 1115 iNum++; | |
| 1116 counter = 0; | |
| 1117 } | |
| 1118 } | |
| 1119 | |
| 1120 // Fix first Temperature Entries 150930 hw | |
| 1121 if(temperature) | |
| 1122 { | |
| 1123 int i = 0; | |
| 1124 while((temperature[i] == -1000) && (i < iNum)) | |
| 1125 temperature[i++] = temperatureFirst; | |
| 1126 } | |
| 1127 | |
| 1128 ext_flash_close_read_sample(); | |
| 1129 return iNum; | |
| 1130 } | |
| 1131 | |
| 1132 | |
| 1133 /******************************************************************************** | |
| 1134 * @brief logbook_InitAndWrite. / Controls writing of logbook | |
| 1135 * Should be called ten times per second | |
| 1136 * Automatically Initializes logbook at beginning of dive, | |
| 1137 * write samples every 2 seconds | |
| 1138 * and finishes logbook after end of dive | |
| 1139 *********************************************************************************/ | |
| 1140 | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1141 void logbook_InitAndWrite(const SDiveState *pStateReal) |
| 38 | 1142 { |
| 1143 SSettings *pSettings = settingsGetPointer(); | |
| 1144 static uint8_t bDiveMode = 0; | |
| 1145 static uint32_t tickstart = 0; | |
| 1146 uint32_t ticksdiff = 0; | |
| 1147 uint32_t lasttick = 0; | |
| 1148 static float min_temperature_float_celsius = 0; | |
| 1149 | |
| 1150 if(!bDiveMode) | |
| 1151 { | |
| 1152 if((pStateReal->mode == MODE_DIVE) && (pStateReal->diveSettings.diveMode != DIVEMODE_Apnea) && (pStateReal->lifeData.dive_time_seconds >= 5)) | |
| 1153 { | |
| 1154 //InitdiveProfile | |
| 1155 pSettings->totalDiveCounter++; | |
| 1156 logbook_initNewdiveProfile(pStateReal,settingsGetPointer()); | |
| 1157 min_temperature_float_celsius = pStateReal->lifeData.temperature_celsius; | |
| 1158 //Write logbook sample | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1159 logbook_writeSample(pStateReal); |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1160 resetEvents(pStateReal); |
| 38 | 1161 tickstart = HAL_GetTick(); |
| 1162 bDiveMode = 1; | |
| 1163 } | |
| 1164 } | |
| 1165 else if((pStateReal->mode == MODE_DIVE) && (pStateReal->diveSettings.diveMode != DIVEMODE_Apnea)) | |
| 1166 { | |
| 1167 lasttick = HAL_GetTick(); | |
| 1168 ticksdiff = time_elapsed_ms(tickstart,lasttick); | |
| 1169 // | |
| 1170 if(ticksdiff >= 2000) | |
| 1171 { | |
| 1172 //Write logbook sample | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1173 logbook_writeSample(pStateReal); |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1174 resetEvents(pStateReal); |
| 38 | 1175 if(min_temperature_float_celsius > pStateReal->lifeData.temperature_celsius) |
| 1176 min_temperature_float_celsius = pStateReal->lifeData.temperature_celsius; | |
| 1177 tickstart = lasttick; | |
| 1178 if((bDiveMode == 1) && (pStateReal->lifeData.dive_time_seconds >= pSettings->divetimeToCreateLogbook)) | |
| 1179 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1180 ext_flash_create_new_dive_log((uint8_t*)&gheader); |
| 38 | 1181 /** save settings |
| 1182 * with new lastDiveLogId and time and day | |
| 1183 */ | |
| 1184 pSettings->personalDiveCount++; | |
| 1185 if(pSettings->logbookOffset) | |
| 1186 { | |
| 1187 pSettings->logbookOffset++; | |
| 1188 } | |
| 427 | 1189 ext_flash_write_settings(0); |
| 38 | 1190 ext_flash_disable_protection_for_logbook(); |
|
426
514e6269256f
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
411
diff
changeset
|
1191 |
|
514e6269256f
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
411
diff
changeset
|
1192 ext_flash_CloseSector(); /* this is just a repair function which invalidates a not used sector in case a log maintenance was called before dive */ |
| 38 | 1193 bDiveMode = 3; |
| 1194 } | |
| 1195 if(bDiveMode == 3) | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1196 logbook_UpdateHeader(pStateReal); |
| 38 | 1197 } |
| 1198 } | |
| 1199 else if(bDiveMode == 3) | |
| 1200 { | |
| 1201 //End of Dive | |
| 1202 logbook_SetAverageDepth(pStateReal->lifeData.average_depth_meter); | |
| 1203 logbook_SetMinTemperature(min_temperature_float_celsius); | |
| 1204 logbook_SetMaxCNS(pStateReal->lifeData.cns); | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1205 logbook_SetCompartmentDesaturation(pStateReal); |
| 38 | 1206 logbook_SetLastStop(pStateReal->diveSettings.last_stop_depth_bar); |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1207 gheader.batteryVoltage = pStateReal->lifeData.battery_voltage * 1000; |
| 38 | 1208 logbook_EndDive(); |
| 1209 bDiveMode = 0; | |
| 1210 } else | |
| 1211 { | |
| 1212 ext_flash_enable_protection(); | |
| 1213 } | |
| 1214 } | |
| 1215 | |
| 1216 | |
| 1217 /* Private functions ---------------------------------------------------------*/ | |
| 1218 | |
| 1219 /******************************************************************************** | |
| 1220 * @brief logbook_UpdateHeader. / | |
| 1221 * set date, time, max depth. etc. pp. | |
| 1222 * the internal pointer to the end of profile and length will be set by | |
| 1223 ext_flash_close_new_dive_log() in externLogbookFlash.c | |
| 1224 * @author heinrichs weikamp gmbh | |
| 1225 * @version V0.0.1 | |
| 1226 * @date 27-Nov-2014 | |
| 1227 *********************************************************************************/ | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1228 static void logbook_UpdateHeader(const SDiveState *pStateReal) |
| 38 | 1229 { |
| 1230 // uint16_t secondsAtShallow = 0; | |
| 1231 RTC_DateTypeDef Sdate; | |
| 1232 RTC_TimeTypeDef Stime; | |
| 1233 uint32_t time1_u32, time2_u32; | |
| 1234 uint32_t divetimeHelper; | |
| 1235 | |
| 1236 /* time and day */ | |
| 1237 /* don't update CHANGE 160224 hw, maybe save actual time and date at other place | |
| 1238 translateDate(pStateReal->lifeData.dateBinaryFormat, &Sdate); | |
| 1239 translateTime(pStateReal->lifeData.timeBinaryFormat, &Stime); | |
| 1240 | |
| 1241 header.dateYear = Sdate.Year; | |
| 1242 header.dateMonth = Sdate.Month; | |
| 1243 header.dateDay = Sdate.Date; | |
| 1244 header.timeHour = Stime.Hours; | |
| 1245 header.timeMinute = Stime.Minutes; | |
| 1246 */ | |
| 1247 /// 160315 Quick fix for empty date problem | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1248 if((!(gheader.dateYear)) || (!(gheader.dateMonth)) || (!(gheader.dateDay))) |
| 38 | 1249 { |
| 1250 translateDate(pStateReal->lifeData.dateBinaryFormat, &Sdate); | |
| 1251 translateTime(pStateReal->lifeData.timeBinaryFormat, &Stime); | |
| 1252 | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1253 gheader.dateYear = Sdate.Year; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1254 gheader.dateMonth = Sdate.Month; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1255 gheader.dateDay = Sdate.Date; |
| 38 | 1256 |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1257 time1_u32 = (uint32_t)gheader.timeMinute + (uint32_t)(gheader.timeHour * 60); |
| 38 | 1258 time2_u32 = (uint32_t)Stime.Minutes + (uint32_t)(Stime.Hours * 60); |
| 1259 if(time2_u32 < time1_u32) | |
| 1260 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1261 if(gheader.dateDay > 1) |
| 38 | 1262 { |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1263 gheader.dateDay -= 1; |
| 38 | 1264 } |
| 1265 else | |
| 1266 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1267 gheader.dateMonth --; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1268 if(!gheader.dateMonth) |
| 38 | 1269 { |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1270 gheader.dateYear--; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1271 gheader.dateMonth = 12; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1272 gheader.dateDay = 31; |
| 38 | 1273 } |
| 1274 else | |
| 1275 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1276 if(gheader.dateMonth == 2) |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1277 gheader.dateDay = 28; |
| 38 | 1278 else |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1279 if((gheader.dateMonth == 4) || (gheader.dateMonth == 6) || (gheader.dateMonth == 9) || (gheader.dateMonth == 11)) |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1280 gheader.dateDay = 30; |
| 38 | 1281 else |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1282 gheader.dateDay = 31; |
| 38 | 1283 } |
| 1284 } | |
| 1285 } | |
| 1286 } | |
| 1287 | |
| 1288 /* duration */ | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1289 gheader.total_diveTime_seconds = pStateReal->lifeData.dive_time_seconds; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1290 gheader.maxDepth = pStateReal->lifeData.max_depth_meter * 100; |
| 38 | 1291 |
| 1292 /* old: | |
| 1293 | |
| 1294 secondsAtShallow = pSettings->timeoutDiveReachedZeroDepth; | |
| 1295 if(pStateReal->lifeData.dive_time_seconds <= secondsAtShallow) | |
| 1296 secondsAtShallow = 0; | |
| 1297 header.diveTimeMinutes = (header.total_diveTime_seconds - secondsAtShallow )/ 60; | |
| 1298 header.diveTimeSeconds = header.total_diveTime_seconds - secondsAtShallow - (header.diveTimeMinutes * 60); | |
| 1299 */ | |
| 1300 divetimeHelper = pStateReal->lifeData.dive_time_seconds_without_surface_time; | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1301 gheader.diveTimeMinutes = (uint16_t)(divetimeHelper/60); |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1302 divetimeHelper -= 60 * (uint32_t)gheader.diveTimeMinutes; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1303 gheader.diveTimeSeconds = (uint16_t)divetimeHelper; |
| 38 | 1304 |
| 1305 /* deco algorithm (final) */ | |
| 1306 if(pStateReal->diveSettings.deco_type.ub.standard == GF_MODE) | |
| 1307 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1308 gheader.decoModel = 1; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1309 gheader.gfLow_or_Vpm_conservatism = pStateReal->diveSettings.gf_low; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1310 gheader.gfHigh = pStateReal->diveSettings.gf_high; |
| 38 | 1311 } |
| 1312 else | |
| 1313 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1314 gheader.decoModel = 2; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1315 gheader.gfLow_or_Vpm_conservatism = pStateReal->diveSettings.vpm_conservatism; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1316 gheader.gfHigh = 0; |
| 38 | 1317 } |
| 1318 | |
| 1319 /* tissue load */ | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1320 memcpy(gheader.n2Compartments, pStateReal->lifeData.tissue_nitrogen_bar, 64); |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1321 memcpy(gheader.heCompartments, pStateReal->lifeData.tissue_helium_bar, 64); |
| 38 | 1322 |
| 1323 } | |
| 1324 | |
| 1325 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
1326 static void logbook_SetAverageDepth(float average_depth_meter) |
| 38 | 1327 { |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1328 gheader.averageDepth_mbar = (uint16_t)(average_depth_meter * 100); |
| 38 | 1329 } |
| 1330 | |
| 1331 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
1332 static void logbook_SetMinTemperature(float min_temperature_celsius) |
| 38 | 1333 { |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1334 gheader.minTemp = (int16_t)((min_temperature_celsius * 10.0f) + 0.5f); |
| 38 | 1335 } |
| 1336 | |
| 1337 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
1338 static void logbook_SetMaxCNS(float max_cns_percentage) |
| 38 | 1339 { |
| 1340 if(max_cns_percentage < 9999) | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1341 gheader.maxCNS = (uint16_t)(max_cns_percentage); |
| 38 | 1342 else |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1343 gheader.maxCNS = 9999; |
| 38 | 1344 } |
| 1345 | |
| 1346 | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1347 static void logbook_SetCompartmentDesaturation(const SDiveState * pStateReal) |
| 38 | 1348 { |
|
225
2bb1db22b5f5
cleanup: random set of cleanups
Jan Mulder <jlmulder@xs4all.nl>
parents:
199
diff
changeset
|
1349 SLifeData2 secondaryInformation = { 0 }; |
| 38 | 1350 |
| 1351 decom_tissues_desaturation_time(&pStateReal->lifeData, &secondaryInformation); | |
| 1352 for(int i=0;i<16;i++) | |
| 1353 { | |
| 1354 if(secondaryInformation.tissue_nitrogen_desaturation_time_minutes[i] <= (15 * 255)) | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1355 gheader.n2CompartDesatTime_min[i] = (uint8_t)((secondaryInformation.tissue_nitrogen_desaturation_time_minutes[i] + 14) / 15); |
| 38 | 1356 else |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1357 gheader.n2CompartDesatTime_min[i] = 255; |
| 38 | 1358 if(secondaryInformation.tissue_helium_desaturation_time_minutes[i] <= (15 * 255)) |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1359 gheader.heCompartDesatTime_min[i] = (uint8_t)((secondaryInformation.tissue_helium_desaturation_time_minutes[i] + 14 )/ 15); |
| 38 | 1360 else |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1361 gheader.heCompartDesatTime_min[i] = 255; |
| 38 | 1362 } |
| 1363 } | |
| 1364 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
1365 static void logbook_SetLastStop(float last_stop_depth_bar) |
| 38 | 1366 { |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1367 gheader.lastDecostop_m = (uint8_t)(last_stop_depth_bar / 10.0f); |
| 38 | 1368 } |
| 1369 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
1370 static void logbook_writedata(void * data, int length_byte) |
| 38 | 1371 { |
| 1372 ext_flash_write_sample(data, length_byte); | |
| 1373 } | |
| 1374 | |
| 1375 /******************************************************************************** | |
| 1376 * @brief logbook_build_ostc3header. / | |
| 1377 * @author heinrichs weikamp gmbh | |
| 1378 * @version V0.0.2 | |
| 1379 * @date 27-Nov-2014 | |
| 1380 *********************************************************************************/ | |
| 1381 SLogbookHeaderOSTC3 * logbook_build_ostc3header(SLogbookHeader* pHead) | |
| 1382 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1383 convert_Type data,data2; |
| 38 | 1384 |
| 1385 memcpy(headerOSTC3.diveHeaderStart, &pHead->diveHeaderStart, 2); | |
| 1386 memcpy(headerOSTC3.pBeginProfileData, &pHead->pBeginProfileData, 3); | |
| 1387 memcpy(headerOSTC3.pEndProfileData, &pHead->pEndProfileData, 3); | |
| 1388 | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1389 |
| 38 | 1390 data.u8bit.byteHigh = 0; |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1391 data.u8bit.byteLow = pHead->pBeginProfileData[0]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1392 data.u8bit.byteMidLow = pHead->pBeginProfileData[1]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1393 data.u8bit.byteMidHigh = pHead->pBeginProfileData[2]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1394 |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1395 data2.u8bit.byteHigh = 0; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1396 data2.u8bit.byteLow = pHead->pEndProfileData[0]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1397 data2.u8bit.byteMidLow = pHead->pEndProfileData[1]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1398 data2.u8bit.byteMidHigh = pHead->pEndProfileData[2]; |
| 38 | 1399 |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1400 /* check if sample address information are corrupted by address range. */ |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1401 /* TODO: Workaround. Better solution would be to check end of ring for 0xFF pattern */ |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1402 if((data.u32bit > data2.u32bit) && (data.u32bit < (SAMPLESTOP - 0x9000))) |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1403 { |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1404 data2.u32bit = data.u32bit + DEFAULT_SAMPLES; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1405 pHead->pEndProfileData[0] = data2.u8bit.byteLow; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1406 pHead->pEndProfileData[1] = data2.u8bit.byteMidLow; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1407 pHead->pEndProfileData[2] = data2.u8bit.byteMidHigh; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1408 data.u32bit = DEFAULT_SAMPLES; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1409 } |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1410 else |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1411 { |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1412 data.u8bit.byteHigh = 0; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1413 data.u8bit.byteLow = pHead->profileLength[0]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1414 data.u8bit.byteMidLow = pHead->profileLength[1]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1415 data.u8bit.byteMidHigh = pHead->profileLength[2]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1416 } |
| 38 | 1417 if(data.u32bit != 0xFFFFFF) |
| 1418 data.u32bit += 3; | |
| 1419 | |
| 1420 headerOSTC3.profileLength[0] = data.u8bit.byteLow; | |
| 1421 headerOSTC3.profileLength[1] = data.u8bit.byteMidLow; | |
| 1422 headerOSTC3.profileLength[2] = data.u8bit.byteMidHigh; | |
| 1423 | |
| 1424 memcpy(headerOSTC3.gasordil, pHead->gasordil, 20); | |
| 1425 | |
| 1426 if(pHead->logbookProfileVersion == LOGBOOK_VERSION) | |
| 1427 { | |
| 1428 headerOSTC3.logbookProfileVersion = LOGBOOK_VERSION_OSTC3; | |
| 1429 memcpy(headerOSTC3.personalDiveCount, &pHead->personalDiveCount, 2); | |
| 1430 headerOSTC3.safetyDistance_10cm = 0; | |
| 1431 | |
| 1432 for(int i=0;i<5;i++) | |
| 1433 { | |
| 1434 if(!pHead->gasordil[i].note.ub.active) | |
| 1435 headerOSTC3.gasordil[3 + (i*4)] = 0; | |
| 1436 else if(pHead->gasordil[i].note.ub.first) | |
| 1437 { | |
| 1438 /* depth = 0, note = 1 */ | |
| 1439 headerOSTC3.gasordil[2 + (i*4)] = 0; | |
| 1440 headerOSTC3.gasordil[3 + (i*4)] = 1; | |
| 1441 } | |
| 1442 else if( pHead->gasordil[i].depth_meter) | |
| 1443 { | |
| 1444 /* note = 3 */ | |
| 1445 headerOSTC3.gasordil[3 + (i*4)] = 3; | |
| 1446 } | |
| 1447 } | |
| 1448 } | |
| 1449 else | |
| 1450 { | |
| 1451 headerOSTC3.logbookProfileVersion = 0xFF; | |
| 1452 headerOSTC3.personalDiveCount[0] = 0xFF; | |
| 1453 headerOSTC3.personalDiveCount[1] = 0xFF; | |
| 1454 headerOSTC3.safetyDistance_10cm = 0xFF; | |
| 1455 } | |
| 1456 | |
| 1457 headerOSTC3.dateYear = pHead->dateYear; | |
| 1458 headerOSTC3.dateMonth = pHead->dateMonth; | |
| 1459 headerOSTC3.dateDay = pHead->dateDay; | |
| 1460 headerOSTC3.timeHour = pHead->timeHour; | |
| 1461 headerOSTC3.timeMinute = pHead->timeMinute; | |
| 1462 | |
| 1463 | |
| 1464 memcpy(headerOSTC3.maxDepth, &pHead->maxDepth, 2); | |
| 1465 memcpy(headerOSTC3.diveTimeMinutes, &pHead->diveTimeMinutes, 2); | |
| 1466 | |
| 1467 headerOSTC3.diveTimeSeconds = pHead->diveTimeSeconds; | |
| 1468 | |
| 1469 memcpy(headerOSTC3.minTemp, &pHead->minTemp, 2); | |
| 1470 memcpy(headerOSTC3.surfacePressure_mbar,&pHead->surfacePressure_mbar, 2); | |
| 1471 memcpy(headerOSTC3.desaturationTime, &pHead->desaturationTime, 2); | |
| 1472 | |
| 1473 headerOSTC3.firmwareVersionHigh = pHead->firmwareVersionHigh; | |
| 1474 headerOSTC3.firmwareVersionLow = pHead->firmwareVersionLow; | |
| 1475 | |
| 1476 memcpy(headerOSTC3.batteryVoltage, &pHead->batteryVoltage, 2); | |
| 1477 | |
| 1478 headerOSTC3.samplingRate = pHead->samplingRate; | |
| 1479 | |
| 1480 memcpy(headerOSTC3.cnsAtBeginning, &pHead->cnsAtBeginning, 2); | |
| 1481 | |
| 1482 headerOSTC3.gfAtBeginning = pHead->gfAtBeginning; | |
| 1483 headerOSTC3.gfAtEnd = pHead->gfAtEnd; | |
| 1484 | |
| 1485 memcpy(headerOSTC3.setpoint, pHead->setpoint, 10); | |
| 1486 | |
| 1487 headerOSTC3.salinity = pHead->salinity; | |
| 1488 | |
| 1489 memcpy(headerOSTC3.maxCNS, &pHead->maxCNS, 2); | |
| 1490 memcpy(headerOSTC3.averageDepth_mbar, &pHead->averageDepth_mbar, 2); | |
| 1491 memcpy(headerOSTC3.total_diveTime_seconds,&pHead->total_diveTime_seconds, 2); | |
| 1492 | |
| 1493 headerOSTC3.gfLow_or_Vpm_conservatism = pHead->gfLow_or_Vpm_conservatism; | |
| 1494 headerOSTC3.gfHigh = pHead->gfHigh; | |
| 1495 headerOSTC3.decoModel = pHead->decoModel; | |
| 1496 | |
| 1497 memcpy(headerOSTC3.diveNumber, &pHead->diveNumber, 2); | |
| 1498 | |
| 1499 headerOSTC3.diveMode = pHead->diveMode; | |
| 1500 headerOSTC3.CCRmode = pHead->CCRmode; | |
| 1501 | |
| 1502 memcpy(headerOSTC3.n2CompartDesatTime_min,pHead->n2CompartDesatTime_min, 16); | |
| 1503 memcpy(headerOSTC3.n2Compartments, pHead->n2Compartments, 64); | |
| 1504 memcpy(headerOSTC3.heCompartDesatTime_min,pHead->heCompartDesatTime_min, 16); | |
| 1505 memcpy(headerOSTC3.heCompartments, pHead->heCompartments, 64); | |
| 1506 | |
| 1507 headerOSTC3.lastDecostop_m = pHead->lastDecostop_m; | |
| 1508 | |
| 1509 memcpy(headerOSTC3.hwHudBattery_mV, &pHead->hwHudBattery_mV, 2); | |
| 1510 | |
| 1511 headerOSTC3.hwHudLastStatus = pHead->hwHudLastStatus; | |
| 1512 | |
| 1513 memcpy(headerOSTC3.batteryGaugeRegisters,&pHead->batteryGaugeRegisters, 6); | |
| 1514 | |
| 1515 | |
| 1516 memcpy(headerOSTC3.diveHeaderEnd, &pHead->diveHeaderEnd, 2); | |
| 1517 | |
| 1518 return &headerOSTC3; | |
| 1519 } | |
| 1520 | |
| 1521 | |
| 1522 /******************************************************************************** | |
| 1523 * @brief logbook_build_ostc3header_compact. / | |
| 1524 * @author heinrichs weikamp gmbh | |
| 1525 * @version V0.0.1 | |
| 1526 * @date 31-Juli-2015 | |
| 1527 *********************************************************************************/ | |
| 1528 SLogbookHeaderOSTC3compact * logbook_build_ostc3header_compact(SLogbookHeader* pHead) | |
| 1529 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1530 convert_Type data, data2; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1531 |
| 38 | 1532 |
| 1533 data.u8bit.byteHigh = 0; | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1534 data.u8bit.byteLow = pHead->pBeginProfileData[0]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1535 data.u8bit.byteMidLow = pHead->pBeginProfileData[1]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1536 data.u8bit.byteMidHigh = pHead->pBeginProfileData[2]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1537 |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1538 data2.u8bit.byteHigh = 0; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1539 data2.u8bit.byteLow = pHead->pEndProfileData[0]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1540 data2.u8bit.byteMidLow = pHead->pEndProfileData[1]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1541 data2.u8bit.byteMidHigh = pHead->pEndProfileData[2]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1542 |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1543 /* check if sample address information are corrupted by address range. */ |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1544 /* TODO: Workaround. Better solution would be to check end of ring for 0xFF pattern */ |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1545 if((data.u32bit > data2.u32bit) && (data.u32bit < (SAMPLESTOP - 0x9000))) |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1546 { |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1547 data2.u32bit = data.u32bit + DEFAULT_SAMPLES; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1548 pHead->pEndProfileData[0] = data2.u8bit.byteLow; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1549 pHead->pEndProfileData[1] = data2.u8bit.byteMidLow; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1550 pHead->pEndProfileData[2] = data2.u8bit.byteMidHigh; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1551 data.u32bit = DEFAULT_SAMPLES; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1552 } |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1553 else |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1554 { |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1555 data.u8bit.byteHigh = 0; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1556 data.u8bit.byteLow = pHead->profileLength[0]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1557 data.u8bit.byteMidLow = pHead->profileLength[1]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1558 data.u8bit.byteMidHigh = pHead->profileLength[2]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1559 } |
| 38 | 1560 |
| 1561 if(data.u32bit != 0xFFFFFF) | |
| 1562 { | |
| 1563 data.u32bit += 3; | |
| 1564 | |
| 1565 headerOSTC3compact.profileLength[0] = data.u8bit.byteLow; | |
| 1566 headerOSTC3compact.profileLength[1] = data.u8bit.byteMidLow; | |
| 1567 headerOSTC3compact.profileLength[2] = data.u8bit.byteMidHigh; | |
| 1568 | |
| 1569 headerOSTC3compact.dateYear = pHead->dateYear; | |
| 1570 headerOSTC3compact.dateMonth = pHead->dateMonth; | |
| 1571 headerOSTC3compact.dateDay = pHead->dateDay; | |
| 1572 headerOSTC3compact.timeHour = pHead->timeHour; | |
| 1573 headerOSTC3compact.timeMinute = pHead->timeMinute; | |
| 1574 | |
| 1575 memcpy(headerOSTC3compact.maxDepth, &pHead->maxDepth, 2); | |
| 1576 memcpy(headerOSTC3compact.diveTimeMinutes, &pHead->diveTimeMinutes, 2); | |
| 1577 | |
| 1578 headerOSTC3compact.diveTimeSeconds = pHead->diveTimeSeconds; | |
| 1579 | |
| 1580 | |
| 1581 headerOSTC3compact.totalDiveNumberLow = pHead->diveNumber & 0xFF; | |
| 1582 headerOSTC3compact.totalDiveNumberHigh = (uint8_t)(pHead->diveNumber/256); | |
| 1583 headerOSTC3compact.profileVersion = 0x24; // Logbook-Profile version, 0x24 = date and time is start not end | |
| 1584 } | |
| 1585 else | |
| 1586 { | |
| 1587 memset(&headerOSTC3compact, 0xFF, sizeof(SLogbookHeaderOSTC3compact)); | |
| 1588 } | |
| 1589 return &headerOSTC3compact; | |
| 1590 } | |
| 1591 | |
| 1592 | |
| 1593 /** | |
| 1594 ****************************************************************************** | |
| 1595 * @brief logbook_readSampleData. / Reads sample data of whole logbook entry | |
| 281 | 1596 * @author heinrichs weikamp |
| 38 | 1597 * @version V0.0.1 |
| 1598 * @date 22-April-2014 | |
| 1599 ****************************************************************************** | |
| 1600 * | |
| 1601 * @param uint8_t StepBackwards: witch lookbook entry? | |
| 1602 * @param uint16_t length : maxlength of output arrays | |
| 1603 * @param int32_t* depth : output array | |
| 1604 * @param int16_t * gasid : output array | |
| 1605 * @param int32_t* temperature : output array | |
| 1606 * @param int32_t* ppo2 : output array | |
| 1607 * @param int32_t* cns : output array | |
| 1608 * @return length of output | |
| 1609 */ | |
| 1610 void logbook_recover_brokenlog(uint8_t headerId) | |
| 1611 { | |
| 1612 int16_t retVal; | |
| 1613 int32_t depthVal = 0; | |
| 1614 int16_t gasidVal = 0; | |
| 1615 int16_t setPointVal = 0; | |
| 1616 int16_t bailoutVal = 0; | |
| 1617 int32_t temperatureVal = 0; | |
| 1618 int32_t sensor1Val = 0; | |
| 1619 int32_t sensor2Val = 0; | |
| 1620 int32_t sensor3Val = 0; | |
| 1621 int32_t cnsVal = 0; | |
| 1622 SManualGas manualGasVal; | |
| 1623 | |
| 1624 //uint16_t* ppo2, uint16_t* cns# | |
| 1625 uint32_t bytesRead = 0; | |
| 1626 | |
| 1627 ext_flash_read_block_start(); | |
| 1628 ext_flash_read_next_sample_part((uint8_t*)&smallHeader, sizeof(SSmallHeader)); | |
| 1629 bytesRead += sizeof(SSmallHeader); | |
| 1630 | |
| 1631 clear_divisor(); | |
| 1632 | |
| 1633 | |
| 1634 int sampleCounter = 0; | |
| 1635 int maxdepth = 0; | |
| 1636 uint32_t avrdepth = 0; | |
| 1637 while (true) | |
| 1638 { | |
| 1639 | |
| 1640 ext_flash_set_entry_point(); | |
| 1641 divisorBackup = divisor; | |
| 1642 retVal = readSample(&depthVal,&gasidVal, &setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, NULL); | |
| 1643 if(retVal == 0) | |
| 1644 { | |
| 1645 //Error try to read again!!! | |
| 1646 ext_flash_reopen_read_sample_at_entry_point(); | |
| 1647 divisor = divisorBackup; | |
| 1648 retVal = readSample(&depthVal,&gasidVal, &setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, NULL); | |
| 1649 | |
| 1650 if(retVal == 0) | |
| 1651 { | |
| 1652 //Error try to read again!!! | |
| 1653 ext_flash_reopen_read_sample_at_entry_point(); | |
| 1654 divisor = divisorBackup; | |
| 1655 retVal = readSample(&depthVal,&gasidVal, &setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, NULL); | |
| 1656 | |
| 1657 if(retVal == 0) | |
| 1658 { | |
| 1659 ext_flash_reopen_read_sample_at_entry_point(); | |
| 1660 break; | |
| 1661 } | |
| 1662 | |
| 1663 } | |
| 1664 } | |
| 1665 if(depthVal > maxdepth) | |
| 1666 maxdepth = depthVal; | |
| 1667 avrdepth += depthVal; | |
| 1668 sampleCounter++; | |
| 1669 bytesRead +=retVal; | |
| 1670 } | |
| 1671 avrdepth/= sampleCounter; | |
| 1672 ext_flash_close_read_sample(); | |
| 1673 SLogbookHeader header; | |
| 1674 | |
| 1675 ext_flash_read_dive_header2((uint8_t*) &header, headerId, false); | |
| 1676 header.total_diveTime_seconds = sampleCounter * header.samplingRate; | |
| 1677 header.diveTimeMinutes = header.total_diveTime_seconds /60; | |
| 1678 header.diveTimeSeconds = header.total_diveTime_seconds - header.diveTimeMinutes * 60; | |
| 1679 header.maxDepth = maxdepth; | |
| 1680 header.averageDepth_mbar = avrdepth; | |
| 1681 SSettings * settings = settingsGetPointer(); | |
| 1682 settings->lastDiveLogId = headerId; | |
| 1683 ext_flash_close_new_dive_log((uint8_t *)&header); | |
| 1684 } | |
| 1685 | |
| 1686 /************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/ |