Mercurial > public > ostc4
annotate Discovery/Src/logbook.c @ 488:9eeab3fead8f
Added "I2C_DeInit();" in hardware detection routines. It's the recommended way
to do and solves potential issues with older OSTC4 hardware generations.
Increased RTE and RTE required numbers
updated "Current build"
| author | heinrichsweikamp |
|---|---|
| date | Sat, 27 Jun 2020 18:40:32 +0200 |
| parents | 90d1f793dcf2 |
| children | b33a8c1c72e5 |
| rev | line source |
|---|---|
| 38 | 1 /** |
| 2 ****************************************************************************** | |
| 3 * @copyright heinrichs weikamp | |
| 4 * @file logbook.c | |
| 5 * @author heinrichs weikamp gmbh and heinrichs weikamp gmbh | |
| 6 * @date 22-Apr-2014 | |
| 7 * @version V0.0.3 | |
| 8 * @since 03-Feb-2016 | |
| 9 * @brief Everything about creating and evaluating the logbook | |
| 10 * without the flash part which is included in externLogbookFlash.c | |
| 11 * and the USB/Bluetooth part in tComm.c | |
| 12 * CHANGE V0.0.3 hw: ppO2 sensor values | |
| 13 * CHANGE V0.0.4 hw: fix event bytes according to hwos_interface.odt dated 160610 in bitbucket hwOS | |
| 14 * @bug | |
| 15 * @warning | |
| 16 @verbatim | |
| 17 ============================================================================== | |
| 18 ##### Header ##### | |
| 19 ============================================================================== | |
| 20 [..] SLogbookHeader | |
| 21 The order has changed in comparsion to OSTC3 for perfect alignment | |
| 22 with 16bit and 32bit. The header is 256kB as well. | |
| 23 DO NOT rearrange anything but add new data to a second page | |
| 24 beyond diveHeaderEnd. Use extraPagesWithData to indicate that there is | |
| 25 data available that was not available in the OSTC3 256KB | |
| 26 This data will be behind the diveHeaderEnd. DO NOT delete diveHeaderEnd. | |
| 27 | |
| 28 [..] SLogbookHeaderOSTC3 | |
| 29 is the format used by the OSTC3. | |
| 30 logbook_getHeaderOSTC3() does the job using the global headers in logbook.c | |
| 31 | |
| 32 [..] SSmallHeader | |
| 33 - is the format used by the OSTC3 | |
| 34 | |
| 35 [..] Summary | |
| 36 The header format is not perfect and might be optimized prior to | |
| 37 releasing the diving computer. For now it is good to be compatible | |
| 38 with PC software available for checking the content of the logbook | |
| 39 | |
| 40 | |
| 41 @endverbatim | |
| 42 ****************************************************************************** | |
| 43 * @attention | |
| 44 * | |
| 45 * <h2><center>© COPYRIGHT(c) 2014 heinrichs weikamp</center></h2> | |
| 46 * | |
| 47 ****************************************************************************** | |
| 48 */ | |
| 49 | |
| 50 /* Includes ------------------------------------------------------------------*/ | |
| 51 #include <stdint.h> | |
| 52 #include <string.h> | |
| 53 #include "logbook.h" | |
| 54 //#include "test_vpm.h" | |
| 55 #include "externLogbookFlash.h" | |
| 56 #include "data_exchange.h" | |
| 57 #include "decom.h" | |
| 58 #include "tHome.h" // for tHome_findNextStop() | |
| 445 | 59 #include "settings.h" |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
60 #include "configuration.h" |
| 38 | 61 |
| 62 /* Private types -------------------------------------------------------------*/ | |
| 63 | |
| 64 #define LOGBOOK_VERSION (0x30) | |
| 65 #define LOGBOOK_VERSION_OSTC3 (0x24) | |
| 66 | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
67 #define DEFAULT_SAMPLES (100) /* Number of sample data bytes in case of an broken header information */ |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
68 #define DUMMY_SAMPLES (1000) /* Maximum number of samples profided by a dummy dive profile */ |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
69 |
| 38 | 70 typedef struct /* don't forget to adjust void clear_divisor(void) */ |
| 71 { | |
| 72 uint8_t temperature; | |
| 73 uint8_t deco_ndl; | |
| 74 uint8_t gradientFactor; | |
| 75 uint8_t ppo2; | |
| 76 uint8_t decoplan; | |
| 77 uint8_t cns; | |
| 78 uint8_t tank; | |
| 79 } SDivisor; | |
| 80 | |
| 81 /* Exported variables --------------------------------------------------------*/ | |
| 82 | |
| 83 /* Private variables ---------------------------------------------------------*/ | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
84 static SLogbookHeader gheader; |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
85 static SLogbookHeaderOSTC3 headerOSTC3; |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
86 static SLogbookHeaderOSTC3compact headerOSTC3compact; |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
87 static SSmallHeader smallHeader; |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
88 static SDivisor divisor; |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
89 static SDivisor divisorBackup; |
| 38 | 90 |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
91 static SSmallHeader smallDummyHeader; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
92 static uint16_t dummyWriteIdx; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
93 static uint16_t dummyReadIdx; |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
94 static uint8_t dummyMemoryBuffer[5000]; |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
95 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
96 |
| 38 | 97 /* Private function prototypes -----------------------------------------------*/ |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
98 static void clear_divisor(void); |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
99 static void logbook_SetAverageDepth(float average_depth_meter); |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
100 static void logbook_SetMinTemperature(float min_temperature_celsius); |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
101 static void logbook_SetMaxCNS(float max_cns_percentage); |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
102 static void logbook_SetCompartmentDesaturation(const SDiveState * pStateReal); |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
103 static void logbook_SetLastStop(float last_stop_depth_bar); |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
104 static void logbook_writedata(void * data, int length_byte); |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
105 static void logbook_UpdateHeader(const SDiveState * pStateReal); |
| 458 | 106 static void logbook_createDummyProfile(SLogbookHeader* pHeader, uint16_t length, uint16_t* depth, int16_t* temperature, uint16_t* ppo2); |
| 38 | 107 |
| 108 /* Exported functions --------------------------------------------------------*/ | |
| 109 | |
| 110 void logbook_EndDive(void) | |
| 111 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
112 ext_flash_close_new_dive_log((uint8_t*) &gheader); |
| 38 | 113 } |
| 114 | |
| 115 | |
| 116 // =============================================================================== | |
| 117 // logbook_last_totalDiveCount | |
| 118 /// @brief Fix setting issues | |
| 119 /// @date 04-April-2016 | |
| 120 /// | |
| 121 /// @return diveNumber (totalDiveCounter) of latest log entry, 0 if not a valid header | |
| 122 // =============================================================================== | |
| 123 uint16_t logbook_lastDive_diveNumber(void) | |
| 124 { | |
| 125 SLogbookHeader tempLogbookHeader; | |
| 126 if(logbook_getHeader(0, &tempLogbookHeader)) | |
| 127 { | |
| 128 return tempLogbookHeader.diveNumber; | |
| 129 } | |
| 130 else | |
| 131 { | |
| 132 return 0; | |
| 133 } | |
| 134 } | |
| 135 | |
| 136 | |
| 137 /** | |
| 138 ****************************************************************************** | |
| 139 * @brief logbook_getCurrentHeader. / | |
| 281 | 140 * @author heinrichs weikamp |
| 38 | 141 * @version V0.0.1 |
| 142 * @date 22-April-2014 | |
| 143 ****************************************************************************** | |
| 144 * | |
| 145 * @return SLogbookHeader*: | |
| 146 */ | |
| 147 SLogbookHeader* logbook_getCurrentHeader(void) | |
| 148 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
149 return &gheader; |
| 38 | 150 } |
| 151 | |
| 152 /** | |
| 153 ****************************************************************************** | |
| 154 * @brief logbook_getNumberOfHeaders. / | |
| 155 * @author heinrichs weikamp gmbh | |
| 156 * @version V0.0.1 | |
| 157 * @date 18-May-2016 | |
| 158 ****************************************************************************** | |
| 159 * | |
| 160 * @return uint8_t : number of valid headers (0xFAFA) found. | |
| 161 */ | |
| 162 uint8_t logbook_getNumberOfHeaders(void) | |
| 163 { | |
| 164 return ext_flash_count_dive_headers(); | |
| 165 } | |
| 166 | |
| 167 | |
| 168 /** | |
| 169 ****************************************************************************** | |
| 170 * @brief logbook_getHeader. / | |
| 281 | 171 * @author heinrichs weikamp |
| 38 | 172 * @version V0.0.1 |
| 173 * @date 22-April-2014 | |
| 174 ****************************************************************************** | |
| 175 * | |
| 176 * @param StepBackwards : 0 Last lokbook entry, 1 second to last entry, etc. | |
| 177 * @param SSLogbookHeader* pLogbookHeader: Output found LogbookHeader | |
| 178 * @return uint8_t : 1 = success | |
| 179 */ | |
| 180 uint8_t logbook_getHeader(uint8_t StepBackwards,SLogbookHeader* pLogbookHeader) | |
| 181 { | |
| 182 ext_flash_read_dive_header((uint8_t *)pLogbookHeader, StepBackwards); | |
| 183 if(pLogbookHeader->diveHeaderStart != 0xFAFA) | |
| 184 return 0; | |
| 185 else | |
| 186 return 1; | |
| 187 } | |
| 188 | |
| 189 /** | |
| 190 ****************************************************************************** | |
| 191 * @brief logbook_initNewdiveProfile. / | |
| 192 * creates header and smallHeader from diveState and global Settings | |
| 193 * and writes new lookboock entry on flash device | |
| 194 * diveState | |
| 281 | 195 * @author heinrichs weikamp |
| 38 | 196 * @version V0.0.1 |
| 197 * @date 22-April-2014 | |
| 198 ****************************************************************************** | |
| 199 * | |
| 200 * @param SDiveState* pInfo: Input | |
| 201 * @param SSettings* pSettings: Input | |
| 202 */ | |
| 203 | |
| 204 void logbook_initNewdiveProfile(const SDiveState* pInfo, SSettings* pSettings) | |
| 205 { | |
| 206 RTC_DateTypeDef Sdate; | |
| 207 RTC_TimeTypeDef Stime; | |
| 208 | |
| 209 for(int i = 0; i < sizeof(SLogbookHeader); i++) | |
| 210 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
211 ((uint8_t*)(&gheader))[i] = 0; |
| 38 | 212 } |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
213 gheader.diveHeaderStart = 0xFAFA; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
214 gheader.diveHeaderEnd = 0xFBFB; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
215 gheader.samplingRate = 2; |
| 38 | 216 if(pInfo->diveSettings.diveMode == DIVEMODE_OC) |
| 217 { | |
| 218 for(int i = 0; i < 5; i++) | |
| 219 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
220 gheader.gasordil[i].oxygen_percentage = pSettings->gas[i+1].oxygen_percentage; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
221 gheader.gasordil[i].helium_percentage = pSettings->gas[i+1].helium_percentage; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
222 gheader.gasordil[i].note.uw = pSettings->gas[i+1].note.uw; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
223 gheader.gasordil[i].depth_meter = pSettings->gas[i+1].depth_meter; |
| 38 | 224 } |
| 225 } | |
| 226 else | |
| 227 { | |
| 228 for(int i = 0; i < 5; i++) | |
| 229 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
230 gheader.gasordil[i].oxygen_percentage = pSettings->gas[i+6].oxygen_percentage; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
231 gheader.gasordil[i].helium_percentage = pSettings->gas[i+6].helium_percentage; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
232 gheader.gasordil[i].note.uw = pSettings->gas[i+6].note.uw; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
233 gheader.gasordil[i].depth_meter = pSettings->gas[i+6].depth_meter; |
| 38 | 234 } |
| 235 | |
| 236 for(int i = 0; i < 5; i++) | |
| 237 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
238 gheader.setpoint[i].setpoint_cbar = pSettings->setpoint[i+1].setpoint_cbar; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
239 gheader.setpoint[i].depth_meter = pSettings->setpoint[i+1].depth_meter; |
| 38 | 240 } |
| 241 } | |
| 242 // header.gasordil[pInfo->lifeData.actualGas.GasIdInSettings].depth_meter = 0; | |
| 243 | |
| 244 translateDate(pInfo->lifeData.dateBinaryFormat, &Sdate); | |
| 245 translateTime(pInfo->lifeData.timeBinaryFormat, &Stime); | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
246 gheader.dateYear = Sdate.Year; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
247 gheader.dateMonth = Sdate.Month; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
248 gheader.dateDay = Sdate.Date; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
249 gheader.timeHour = Stime.Hours; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
250 gheader.timeMinute = Stime.Minutes; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
251 gheader.cnsAtBeginning = (uint16_t)pInfo->lifeData.cns; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
252 gheader.surfacePressure_mbar = (uint16_t)(pInfo->lifeData.pressure_surface_bar * 1000); |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
253 gheader.firmwareVersionHigh = firmwareVersion_16bit_high(); |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
254 gheader.firmwareVersionLow = firmwareVersion_16bit_low(); |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
255 gheader.logbookProfileVersion = LOGBOOK_VERSION; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
256 gheader.salinity = pSettings->salinity; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
257 gheader.diveNumber = pSettings->totalDiveCounter; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
258 gheader.personalDiveCount = pSettings->personalDiveCount; |
| 38 | 259 |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
260 gheader.diveMode = pInfo->diveSettings.diveMode; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
261 gheader.CCRmode = pInfo->diveSettings.CCR_Mode; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
262 gheader.lastDecostop_m = pSettings->last_stop_depth_meter; |
| 38 | 263 |
| 264 if(pInfo->diveSettings.deco_type.ub.standard == GF_MODE) | |
| 265 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
266 gheader.decoModel = 1; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
267 gheader.gfLow_or_Vpm_conservatism = pInfo->diveSettings.gf_low; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
268 gheader.gfHigh = pInfo->diveSettings.gf_high; |
| 38 | 269 } |
| 270 else | |
| 271 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
272 gheader.decoModel = 2; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
273 gheader.gfLow_or_Vpm_conservatism = pInfo->diveSettings.vpm_conservatism; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
274 gheader.gfHigh = 0; |
| 38 | 275 } |
| 276 | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
277 memcpy(gheader.n2Compartments, pInfo->lifeData.tissue_nitrogen_bar, 64); |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
278 memcpy(gheader.heCompartments, pInfo->lifeData.tissue_helium_bar, 64); |
| 38 | 279 |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
280 logbook_SetCompartmentDesaturation(pInfo); |
| 38 | 281 |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
282 ext_flash_start_new_dive_log_and_set_actualPointerSample((uint8_t*)&gheader); |
| 38 | 283 |
| 284 smallHeader.profileLength[0] = 0xFF; | |
| 285 smallHeader.profileLength[1] = 0xFF; | |
| 286 smallHeader.profileLength[2] = 0xFF; | |
| 287 smallHeader.samplingRate_seconds = 2; | |
| 288 smallHeader.numDivisors = 7; | |
| 289 | |
| 290 smallHeader.tempType = 0; | |
| 291 smallHeader.tempLength = 2; | |
| 292 smallHeader.tempDivisor = 6; | |
| 293 | |
| 294 smallHeader.deco_ndlType = 1; | |
| 295 smallHeader.deco_ndlLength = 2; | |
| 296 smallHeader.deco_ndlDivisor = 6; //= 6; | |
| 297 | |
| 298 /* GF in % at actual position */ | |
| 299 smallHeader.gfType = 2; | |
| 300 smallHeader.gfLength = 1; | |
| 301 smallHeader.gfDivisor = 0; //12; | |
| 302 | |
| 303 /* 3 Sensors: 8bit ppO2 in 0.01bar, 16bit voltage in 0,1mV */ | |
| 304 smallHeader.ppo2Type = 3; | |
| 305 smallHeader.ppo2Length = 9; | |
| 306 smallHeader.ppo2Divisor = 2; //2 | |
| 307 | |
| 308 /* last 15 stops in minutes (last, second_to_last, ... */ | |
| 309 /* last stop depth is defined in header */ | |
| 310 smallHeader.decoplanType = 4; | |
| 311 smallHeader.decoplanLength = 15; | |
| 312 smallHeader.decoplanDivisor = 12;//12; | |
| 313 | |
| 314 smallHeader.cnsType = 5; | |
| 315 smallHeader.cnsLength = 2; | |
| 316 smallHeader.cnsDivisor = 12; | |
| 317 | |
| 318 smallHeader.tankType = 6; | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
319 #ifdef ENABLE_BOTTLE_SENSOR |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
320 smallHeader.tankLength = 2; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
321 smallHeader.tankDivisor = 30; /* log tank data once a minute */ |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
322 #else |
| 38 | 323 smallHeader.tankLength = 0; |
| 324 smallHeader.tankDivisor = 0; | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
325 #endif |
| 38 | 326 logbook_writedata((void *) &smallHeader,sizeof(smallHeader)); |
| 327 | |
| 328 clear_divisor(); | |
| 329 } | |
| 330 | |
| 331 /** | |
| 332 ****************************************************************************** | |
| 333 * @brief clear_divisor / clears divisor struct | |
| 281 | 334 * @author heinrichs weikamp |
| 38 | 335 * @version V0.0.1 |
| 336 * @date 22-April-2014 | |
| 337 ****************************************************************************** | |
| 338 * | |
| 339 */ | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
340 static void clear_divisor(void) |
| 38 | 341 { |
| 342 divisor.cns = smallHeader.cnsDivisor - 1; | |
| 343 divisor.decoplan = smallHeader.decoplanDivisor - 1; | |
| 344 divisor.deco_ndl = smallHeader.deco_ndlDivisor - 1; | |
| 345 divisor.gradientFactor = smallHeader.gfDivisor -1 ; | |
| 346 divisor.ppo2 = smallHeader.ppo2Divisor - 1; | |
| 347 divisor.tank = smallHeader.tankDivisor - 1; | |
| 348 divisor.temperature = smallHeader.tempDivisor - 1; | |
| 349 } | |
| 350 | |
| 351 | |
| 352 /** | |
| 353 ****************************************************************************** | |
| 354 * @brief add16. / adds 16 bit variable to 8 bit array | |
| 281 | 355 * @author heinrichs weikamp |
| 38 | 356 * @version V0.0.1 |
| 357 * @date 22-April-2014 | |
| 358 ****************************************************************************** | |
| 359 * | |
| 360 * @param uint8_t *pos: Output 8 bit array | |
| 361 * @param uint16_t var: 16 bit variable | |
| 362 */ | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
363 static void addU16(uint8_t *pos, uint16_t var) |
| 38 | 364 { |
| 365 *((uint16_t*)pos) = var; | |
| 366 } | |
| 367 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
368 static void addS16(uint8_t *pos, int16_t var) |
| 38 | 369 { |
| 370 *((int16_t*)pos) = var; | |
| 371 } | |
| 372 | |
| 373 /** | |
| 374 ****************************************************************************** | |
| 375 * @brief logbook_writeSample. / Writes one logbook sampl | |
| 281 | 376 * @author heinrichs weikamp |
| 38 | 377 * @date 22-April-2014 |
| 378 * @version V0.0.2 | |
| 379 * @since 20-June-2016 | |
| 380 * @bug Deco/NDL Status fixed in V0.0.2 | |
| 381 | |
| 382 | |
| 383 ****************************************************************************** | |
| 384 * | |
| 385 * @param SDiveState state: | |
| 386 */ | |
| 387 | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
388 void logbook_writeSample(const SDiveState *state) |
| 38 | 389 { |
| 390 uint8_t sample[256]; | |
| 391 // int position = 0; | |
| 392 int length = 0; | |
| 393 // _Bool bEvent = 0; | |
| 394 uint8_t nextstopDepthMeter = 0; | |
| 395 uint16_t nextstopLengthSeconds = 0; | |
| 396 uint8_t nextstopLengthMinutes = 0; | |
| 397 bit8_Type eventByte1, eventByte2; | |
| 398 bit8_Type profileByteFlag; | |
| 399 int i = 0; | |
| 400 for(i = 0; i <256 ;i++) | |
| 401 sample[i] = 0; | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
402 addU16(sample, (uint16_t)(state->lifeData.depth_meter * 100)); |
| 38 | 403 length += 2; |
| 404 sample[2] = 0; | |
| 405 length++; | |
| 406 eventByte1.uw = 0; | |
| 407 eventByte2.uw = 0; | |
| 408 //uint16_t tmpU16 = 0; | |
|
130
b7689d9e888a
Minor changes to improved code quality and to eliminate warnings
Ideenmodellierer
parents:
38
diff
changeset
|
409 const SDecoinfo * pDecoinfo; // new hw 160620 |
| 38 | 410 |
| 411 //BuildEevntyte 1 | |
| 412 // sub old 0-3 only one at a time | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
413 if(state->events.manualMarker) |
| 38 | 414 { |
| 415 eventByte1.uw = 6; | |
| 416 } | |
| 417 else | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
418 if(state->warnings.decoMissed) |
| 38 | 419 { |
| 420 eventByte1.uw = 2; | |
| 421 } | |
| 422 else | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
423 if(state->warnings.ppO2Low) |
| 38 | 424 { |
| 425 eventByte1.uw = 4; | |
| 426 } | |
| 427 else | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
428 if(state->warnings.ppO2High) |
| 38 | 429 { |
| 430 eventByte1.uw = 5; | |
| 431 } | |
| 432 else | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
433 if(state->warnings.lowBattery) |
| 38 | 434 { |
| 435 eventByte1.uw = 7; | |
| 436 } | |
| 437 else | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
438 if(state->warnings.slowWarning) |
| 38 | 439 { |
| 440 eventByte1.uw = 1; | |
| 441 } | |
| 442 // sub bit 4 to 7 | |
| 281 | 443 if(state->events.manualGasSet) |
| 38 | 444 { |
| 445 eventByte1.ub.bit4 = 1; | |
| 446 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
447 if(state->events.gasChange) |
| 38 | 448 { |
| 449 eventByte1.ub.bit5 = 1; | |
| 450 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
451 if(state->events.setpointChange) |
| 38 | 452 { |
| 453 eventByte1.ub.bit6 = 1; | |
| 454 } | |
| 455 // sub bit 7 + eventbyte2 | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
456 if(state->events.bailout) |
| 38 | 457 { |
| 458 eventByte1.ub.bit7 = 1; | |
| 459 eventByte2.ub.bit0 = 1; | |
| 460 } | |
| 461 //Add EventByte 1 | |
| 462 if(eventByte1.uw > 0) | |
| 463 { | |
| 464 sample[length] = eventByte1.uw; | |
| 465 length++; | |
| 466 } | |
| 467 if(eventByte2.uw > 0) | |
| 468 { | |
| 469 sample[length] = eventByte2.uw; | |
| 470 length++; | |
| 471 } | |
| 472 //Add EventInfos | |
| 281 | 473 if(state->events.manualGasSet) |
| 38 | 474 { |
| 475 //manual gas in %O2 & %He | |
| 281 | 476 sample[length] = state->events.info_manualGasSetO2; |
| 38 | 477 length += 1; |
| 281 | 478 sample[length] = state->events.info_manualGasSetHe; |
| 38 | 479 length += 1; |
| 480 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
481 if(state->events.gasChange) |
| 38 | 482 { |
| 483 //Current gas (gasid) | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
484 sample[length] = state->events.info_GasChange; |
| 38 | 485 length += 1; |
| 486 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
487 if(state->events.setpointChange) |
| 38 | 488 { |
| 489 //New setpoint in cbar | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
490 sample[length] = state->events.info_SetpointChange; |
| 38 | 491 length += 1; |
| 492 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
493 if(state->events.bailout) |
| 38 | 494 { |
| 495 //bailout gas in % O2 & %He | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
496 sample[length] = state->events.info_bailoutO2; |
| 38 | 497 length += 1; |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
498 sample[length] = state->events.info_bailoutHe; |
| 38 | 499 length += 1; |
| 500 } | |
| 501 | |
| 502 | |
| 503 if(divisor.temperature == 0) | |
| 504 { | |
| 505 divisor.temperature = smallHeader.tempDivisor - 1; | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
506 addS16(&sample[length], (int16_t)((state->lifeData.temperature_celsius * 10.0f) + 0.5f)); |
| 38 | 507 length += 2; |
| 508 } | |
| 509 else | |
| 510 { | |
| 511 divisor.temperature--; | |
| 512 } | |
| 513 | |
| 514 | |
| 515 if(smallHeader.deco_ndlDivisor > 0) | |
| 516 { | |
| 517 if(divisor.deco_ndl == 0) | |
| 518 { | |
| 519 divisor.deco_ndl = smallHeader.deco_ndlDivisor - 1; | |
| 520 | |
| 521 if(stateUsed->diveSettings.deco_type.ub.standard == GF_MODE) | |
| 522 pDecoinfo = &stateUsed->decolistBuehlmann; | |
| 523 else if(stateUsed->diveSettings.deco_type.ub.standard == VPM_MODE) | |
| 524 pDecoinfo = &stateUsed->decolistVPM; | |
| 525 else // should not happen as only GF and VPM at the moment | |
| 526 { | |
| 527 sample[length] = 0; | |
| 528 length += 1; | |
| 529 sample[length] = 0; | |
| 530 length += 1; | |
| 458 | 531 pDecoinfo = &stateUsed->decolistBuehlmann; /* use GF per default if something went wrong */ |
| 38 | 532 } |
| 533 | |
| 534 if(pDecoinfo->output_ndl_seconds > 0) | |
| 535 { | |
| 536 sample[length] = 0; | |
| 537 length += 1; | |
|
283
04cdeff80254
Bugfix: write NDL in logbook correctly
Jan Mulder <jlmulder@xs4all.nl>
parents:
281
diff
changeset
|
538 sample[length] = (uint8_t)(pDecoinfo->output_ndl_seconds / 60); |
| 281 | 539 |
| 540 // Limit stored sample within 0 to 240 mins (Since it's 8bit UINT only) | |
| 541 if ((pDecoinfo->output_ndl_seconds / 60) > 240) sample[length] = 240; | |
| 542 if ((pDecoinfo->output_ndl_seconds / 60) < 0) sample[length] = 0; | |
| 543 | |
| 38 | 544 length += 1; |
| 545 } | |
| 546 else if(pDecoinfo->output_time_to_surface_seconds) | |
| 547 { | |
| 548 tHome_findNextStop(pDecoinfo->output_stop_length_seconds, &nextstopDepthMeter, &nextstopLengthSeconds); | |
| 549 nextstopLengthMinutes = (nextstopLengthSeconds +59 ) / 60; | |
| 550 | |
| 551 sample[length] = nextstopDepthMeter; | |
| 552 length += 1; | |
| 553 sample[length] = nextstopLengthMinutes; | |
| 554 length += 1; | |
| 555 } | |
| 556 else | |
| 557 { | |
| 558 sample[length] = 0; | |
| 559 length += 1; | |
| 560 sample[length] = 0; | |
| 561 length += 1; | |
| 562 } | |
| 563 } | |
| 564 else | |
| 565 { | |
| 566 divisor.deco_ndl --; | |
| 567 } | |
| 568 } | |
| 569 | |
| 570 | |
| 571 if(smallHeader.ppo2Divisor) | |
| 572 { | |
| 573 if(divisor.ppo2 == 0) | |
| 574 { | |
| 575 divisor.ppo2 = smallHeader.ppo2Divisor - 1; | |
| 576 | |
| 577 for(int i = 0; i <3; i++) | |
| 578 { | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
579 sample[length] = (uint8_t)(state->lifeData.ppO2Sensor_bar[i] * 100.0f + 0.5f); |
| 38 | 580 length += 1; |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
581 addU16(&sample[length], (uint16_t)(state->lifeData.sensorVoltage_mV[i] * 10.0f + 0.5f)); |
| 38 | 582 length += 2; |
| 583 } | |
| 584 } | |
| 585 else | |
| 586 { | |
| 587 divisor.ppo2--; | |
| 588 } | |
| 589 } | |
| 590 | |
| 591 | |
| 592 if(smallHeader.decoplanDivisor) | |
| 593 { | |
| 594 if(divisor.decoplan == 0) | |
| 595 { | |
| 596 divisor.decoplan = smallHeader.decoplanDivisor - 1; | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
597 if(state->diveSettings.deco_type.ub.standard == VPM_MODE) |
| 38 | 598 { |
| 599 for(int i = 0; i <15; i++) | |
| 600 { | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
601 sample[length] = state->decolistVPM.output_stop_length_seconds[i] / 60; |
| 38 | 602 length += 1; |
| 603 } | |
| 604 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
605 else if(state->diveSettings.deco_type.ub.standard == GF_MODE) |
| 38 | 606 { |
| 607 for(int i = 0; i <15; i++) | |
| 608 { | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
609 sample[length] = state->decolistBuehlmann.output_stop_length_seconds[i] / 60; |
| 38 | 610 length += 1; |
| 611 } | |
| 612 } | |
| 613 else | |
| 614 { | |
| 615 for(int i = 0; i <15; i++) | |
| 616 { | |
| 617 sample[length] = 0; | |
| 618 length += 1; | |
| 619 } | |
| 620 } | |
| 621 // add16(&sample[length], state.temperature); | |
| 622 //length += 2; | |
| 623 } | |
| 624 else | |
| 625 { | |
| 626 divisor.decoplan --; | |
| 627 } | |
| 628 } | |
| 629 if(divisor.cns == 0) | |
| 630 { | |
| 631 divisor.cns = smallHeader.cnsDivisor - 1; | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
632 addU16(&sample[length], (uint16_t)state->lifeData.cns); |
| 38 | 633 length += 2; |
| 634 } | |
| 635 else | |
| 636 { | |
| 637 divisor.cns--; | |
| 638 } | |
| 639 | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
640 #ifdef ENABLE_BOTTLE_SENSOR |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
641 if(smallHeader.tankDivisor) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
642 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
643 if(divisor.tank == 0) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
644 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
645 divisor.tank = smallHeader.tankDivisor - 1; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
646 addS16(&sample[length], ((state->lifeData.bottle_bar[state->lifeData.actualGas.GasIdInSettings]))); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
647 length += smallHeader.tankLength; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
648 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
649 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
650 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
651 divisor.tank--; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
652 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
653 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
654 #endif |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
655 |
| 38 | 656 profileByteFlag.uw = length - 3; |
| 657 if(eventByte1.uw) | |
| 658 { | |
| 659 profileByteFlag.ub.bit7 = 1; | |
| 660 } | |
| 661 sample[2] = profileByteFlag.uw; | |
| 662 logbook_writedata((void *) sample,length); | |
| 663 | |
| 664 } | |
| 665 | |
| 666 /** | |
| 667 ****************************************************************************** | |
| 668 * @brief readSample. / Reads data of one logbook sample | |
| 281 | 669 * @author heinrichs weikamp |
| 38 | 670 * @version V0.0.1 |
| 671 * @date 22-April-2014 | |
| 672 ****************************************************************************** | |
| 673 * | |
| 674 * @param int32_t* depth: output Value | |
| 675 * @param int16_t * gasid: output Value | |
| 676 * @param int32_t* temperature: output Value | |
| 677 * @param int32_t* sensor1, sensor2, sensor3: output Value | |
| 678 * @param int32_t* cns: output Value | |
| 679 * @return bytes read / 0 = reading Error | |
| 680 */ | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
681 static uint16_t readSample(int32_t* depth, int16_t * gasid, int16_t* setpoint_cbar, int32_t* temperature, int32_t* sensor1, int32_t* sensor2, |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
682 int32_t* sensor3, int32_t* cns, SManualGas* manualGas, int16_t* bailout, int16_t* decostopDepth, uint16_t* tank) |
| 38 | 683 { |
| 684 int length = 0; | |
| 685 _Bool bEvent = 0; | |
| 686 bit8_Type eventByte1, eventByte2; | |
| 687 bit8_Type profileByteFlag; | |
| 688 | |
| 689 eventByte1.uw = 0; | |
| 690 eventByte2.uw = 0; | |
| 691 uint8_t tempU8 = 0; | |
| 692 uint16_t temp = 0; | |
| 693 uint16_t bytesRead = 0; | |
| 694 | |
| 695 if(gasid) | |
| 696 *gasid = -1; | |
| 697 if(temperature) | |
| 698 *temperature = -1000; | |
| 699 if(sensor1) | |
| 700 *sensor1 = -1; | |
| 701 if(sensor2) | |
| 702 *sensor2 = -1; | |
| 703 if(sensor3) | |
| 704 *sensor3 = -1; | |
| 705 if(cns) | |
| 706 *cns = -1; | |
| 707 if(setpoint_cbar) | |
| 708 *setpoint_cbar = -1; | |
| 709 if(bailout) | |
| 710 *bailout = -1; | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
711 if(tank) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
712 *tank = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
713 |
| 38 | 714 if(manualGas) |
| 715 { | |
| 716 manualGas->percentageO2 =-1; | |
| 717 manualGas->percentageHe =-1; | |
| 718 } | |
| 719 if(decostopDepth) | |
| 720 *decostopDepth = -1; | |
| 721 | |
| 722 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); | |
| 723 if(depth) | |
| 724 *depth = (int32_t)temp; | |
| 725 bytesRead += 2; | |
| 726 | |
| 727 ext_flash_read_next_sample_part( &profileByteFlag.uw, 1); | |
| 728 bytesRead ++; | |
| 729 | |
| 730 bEvent = profileByteFlag.ub.bit7; | |
| 731 profileByteFlag.ub.bit7 = 0; | |
| 732 length = profileByteFlag.uw; | |
| 733 | |
| 734 if(bEvent) | |
| 735 { | |
| 736 ext_flash_read_next_sample_part( &eventByte1.uw, 1); | |
| 737 bytesRead ++; | |
| 738 | |
| 739 length--; | |
| 740 | |
| 741 //second event byte | |
| 742 if(eventByte1.ub.bit7) | |
| 743 { | |
| 744 ext_flash_read_next_sample_part( &eventByte2.uw, 1); | |
| 745 bytesRead ++; | |
| 746 length--; | |
| 747 } | |
| 748 else | |
| 749 { | |
| 750 eventByte2.uw = 0; | |
| 751 } | |
| 752 | |
| 753 //manual Gas Set | |
| 754 if( eventByte1.ub.bit4) | |
| 755 { | |
| 756 //Evaluate manual Gas | |
| 757 ext_flash_read_next_sample_part( (uint8_t*)&tempU8, 1); | |
| 758 bytesRead +=1; | |
| 759 length -= 1; | |
| 760 manualGas->percentageO2 = tempU8; | |
| 761 ext_flash_read_next_sample_part( (uint8_t*)&tempU8, 1); | |
| 762 bytesRead +=1; | |
| 763 length -= 1; | |
| 764 manualGas->percentageHe = tempU8; | |
| 765 if(gasid) | |
| 766 *gasid = 0; | |
| 767 } | |
| 768 //gas change | |
| 769 if( eventByte1.ub.bit5) | |
| 770 { | |
| 771 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 772 bytesRead +=1; | |
| 773 length -= 1; | |
| 774 if(gasid) | |
| 775 *gasid = (uint16_t)tempU8; | |
| 776 } | |
| 777 //SetpointChange | |
| 778 if( eventByte1.ub.bit6) | |
| 779 { | |
| 780 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 781 *setpoint_cbar = tempU8; | |
| 782 bytesRead +=1; | |
| 783 length -= 1; | |
| 784 } | |
| 785 | |
| 786 // second event Byte | |
| 787 //bailout | |
|
298
50c26a4442af
Bugfix: fix drawing of CCR bailout profile
Jan Mulder <jlmulder@xs4all.nl>
parents:
283
diff
changeset
|
788 if(eventByte2.ub.bit0) |
| 38 | 789 { |
| 790 //evaluate bailout gas Gas | |
| 791 *bailout = 1; | |
| 792 | |
| 793 ext_flash_read_next_sample_part( (uint8_t*)&tempU8, 1); | |
| 794 bytesRead +=1; | |
| 795 length -= 1; | |
| 796 manualGas->percentageO2 = tempU8; | |
| 797 ext_flash_read_next_sample_part( (uint8_t*)&tempU8, 1); | |
| 798 bytesRead +=1; | |
| 799 length -= 1; | |
| 800 manualGas->percentageHe = tempU8; | |
| 801 | |
| 802 if(gasid) | |
| 803 *gasid = 0; | |
| 804 } | |
| 805 } | |
| 806 | |
| 807 if(divisor.temperature == 0) | |
| 808 { | |
| 809 divisor.temperature = smallHeader.tempDivisor - 1; | |
| 810 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); | |
| 811 bytesRead +=2; | |
| 812 length -= 2; | |
| 813 if(temperature) | |
| 814 { | |
| 815 *temperature = (int32_t)temp; | |
| 816 } | |
| 817 } | |
| 818 else | |
| 819 { | |
| 820 divisor.temperature--; | |
| 821 } | |
| 822 | |
| 823 if(smallHeader.deco_ndlDivisor > 0) | |
| 824 { | |
| 825 if(divisor.deco_ndl == 0) | |
| 826 { | |
| 827 divisor.deco_ndl = smallHeader.deco_ndlDivisor - 1; | |
| 828 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 829 if(decostopDepth) | |
| 830 { | |
| 831 *decostopDepth = tempU8 * 100; | |
| 832 } | |
| 833 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 834 bytesRead += 2; | |
| 835 length -= 2; | |
| 836 } | |
| 837 else | |
| 838 { | |
| 839 divisor.deco_ndl--; | |
| 840 } | |
| 841 } | |
| 842 | |
| 843 if(divisor.ppo2 == 0) | |
| 844 { | |
| 845 int32_t ppO2Tmp = 0; | |
| 846 divisor.ppo2 = smallHeader.ppo2Divisor -1; | |
| 847 for(int i = 0; i <3 ; i++) | |
| 848 { | |
| 849 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 850 ppO2Tmp += tempU8; | |
| 851 bytesRead +=1; | |
| 852 length -= 1; | |
| 853 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); | |
| 854 bytesRead +=2; | |
| 855 length -= 2; | |
| 856 if(sensor1 && (i==0)) | |
| 857 *sensor1 = (((int32_t)tempU8) * 0xFFFF) + temp; | |
| 858 if(sensor2 && (i==1)) | |
| 859 *sensor2 = (((int32_t)tempU8) * 0xFFFF) + temp; | |
| 860 if(sensor3 && (i==2)) | |
| 861 *sensor3 = (((int32_t)tempU8) * 0xFFFF) + temp; | |
| 862 } | |
| 863 } | |
| 864 else | |
| 865 { | |
| 866 divisor.ppo2--; | |
| 867 } | |
| 868 | |
| 869 if(smallHeader.decoplanDivisor > 0) | |
| 870 { | |
| 871 if(divisor.decoplan == 0) | |
| 872 { | |
| 873 divisor.decoplan = smallHeader.decoplanDivisor - 1; | |
| 874 for(int i = 0; i <15; i++) | |
| 875 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 876 bytesRead += 15; | |
| 877 length -= 15; | |
| 878 } | |
| 879 else | |
| 880 { | |
| 881 divisor.decoplan--; | |
| 882 } | |
| 883 } | |
| 884 | |
| 885 | |
| 886 | |
| 887 if(divisor.cns == 0) | |
| 888 { | |
| 889 divisor.cns = smallHeader.cnsDivisor - 1; | |
| 890 | |
| 891 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); | |
| 892 bytesRead +=2; | |
| 893 length -= 2; | |
| 894 if(cns) | |
| 895 { | |
| 896 *cns = (int32_t)temp; | |
| 897 } | |
| 898 } | |
| 899 else | |
| 900 { | |
| 901 divisor.cns--; | |
| 902 } | |
| 903 | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
904 if(smallHeader.tankDivisor) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
905 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
906 if(divisor.tank == 0) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
907 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
908 divisor.tank = smallHeader.tankDivisor - 1; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
909 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
910 bytesRead +=2; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
911 length -= 2; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
912 if(tank) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
913 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
914 *tank = (uint16_t)temp; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
915 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
916 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
917 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
918 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
919 divisor.tank--; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
920 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
921 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
922 |
| 38 | 923 if (length != 0) |
| 924 return 0; | |
| 925 | |
| 926 return bytesRead; | |
| 927 } | |
| 928 /** | |
| 929 ****************************************************************************** | |
| 930 * @brief logbook_readSampleData. / Reads sample data of whole logbook entry | |
| 281 | 931 * @author heinrichs weikamp |
| 38 | 932 * @version V0.0.1 |
| 933 * @date 22-April-2014 | |
| 934 ****************************************************************************** | |
| 935 * | |
| 936 * @param uint8_t StepBackwards: witch lookbook entry? | |
| 937 * @param uint16_t length : maxlength of output arrays | |
| 938 * @param int32_t* depth : output array | |
| 939 * @param int16_t * gasid : output array | |
| 940 * @param int32_t* temperature : output array | |
| 941 * @param int32_t* ppo2 : output array | |
| 942 * @param int32_t* cns : output array | |
| 943 * @return length of output | |
| 944 */ | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
945 uint16_t logbook_readSampleData(uint8_t StepBackwards, uint16_t length,uint16_t* depth, uint8_t* gasid, int16_t* temperature, uint16_t* ppo2, |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
946 uint16_t* setpoint, uint16_t* sensor1, uint16_t* sensor2, uint16_t* sensor3, uint16_t* cns, uint8_t* bailout, |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
947 uint16_t* decostopDepth, uint16_t* tank) |
| 38 | 948 { |
| 949 //Test read | |
| 950 //SLogbookHeader header; | |
| 951 | |
| 952 //logbook_getHeader(&header); | |
| 953 SLogbookHeader header; | |
| 458 | 954 int16_t iNum; |
| 955 int16_t firstgasid = 0; | |
| 956 uint16_t retVal = 0; | |
| 957 int16_t compression = 0; | |
| 958 int16_t i; | |
| 38 | 959 // uint32_t diveTime_seconds; |
| 960 int32_t depthVal = 0; | |
| 961 int16_t gasidVal = 0; | |
| 962 int16_t setPointVal = 0; | |
| 963 int16_t bailoutVal = 0; | |
| 964 int16_t bailoutLast = 0; | |
| 965 uint16_t setPointLast = 0; | |
| 966 int32_t temperatureVal = 0; | |
| 967 int32_t sensor1Val = 0; | |
| 968 int32_t sensor2Val = 0; | |
| 969 int32_t sensor3Val = 0; | |
| 970 int32_t sensor1Last = 0; | |
| 971 int32_t sensor2Last = 0; | |
| 972 int32_t sensor3Last = 0; | |
| 973 int32_t cnsVal = 0; | |
| 974 int32_t depthLast = 0; | |
| 975 int16_t gasidLast = 0; | |
| 976 int32_t temperatureLast = 0; | |
| 977 int32_t temperatureFirst = 0; | |
| 978 int32_t cnsLast = 0; | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
979 int16_t decostepDepthVal = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
980 int16_t decostepDepthLast = 0; |
| 457 | 981 uint16_t tankVal = 0; |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
982 uint32_t small_profileLength = 0; |
| 38 | 983 |
| 984 SManualGas manualGasVal; | |
| 985 SManualGas manualGasLast; | |
| 986 manualGasLast.percentageO2 = 0; | |
| 987 manualGasLast.percentageHe = 0; | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
988 uint16_t numSamples = 0; |
| 38 | 989 |
| 990 float ambiant_pressure_bar = 0; | |
| 991 float ppO2 = 0; | |
| 992 ext_flash_read_dive_header((uint8_t*)&header, StepBackwards); | |
| 993 for(i = 0;i< 5;i++) | |
| 994 { | |
| 995 if(header.gasordil[i].note.ub.first) | |
| 996 break; | |
| 997 } | |
| 998 firstgasid = i + 1; | |
| 999 if(header.diveMode == DIVEMODE_CCR) | |
| 1000 setPointLast = header.setpoint[0].setpoint_cbar; | |
| 1001 else | |
| 1002 setPointLast = 0; | |
| 1003 //diveTime_seconds = header.diveTime_seconds ; | |
| 1004 for(compression = 1; compression < 100; compression ++) | |
| 1005 { | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1006 numSamples = (header.total_diveTime_seconds / header.samplingRate)/compression; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1007 if(numSamples <= length) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1008 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1009 break; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1010 } |
| 38 | 1011 } |
| 1012 | |
| 1013 | |
| 1014 for(i = 0;i< length;i++) | |
| 1015 { | |
| 1016 if(depth) | |
| 1017 depth[i] = 0; | |
| 1018 if(temperature) | |
| 1019 temperature[i] = 0; | |
| 1020 if(gasid) | |
| 1021 gasid[i] = 0; | |
| 1022 if(ppo2) | |
| 1023 ppo2[i] = 0; | |
| 1024 if(setpoint) | |
| 1025 setpoint[i] = 0; | |
| 1026 if(sensor1) | |
| 1027 sensor1[i] = 0; | |
| 1028 if(sensor2) | |
| 1029 sensor2[i] = 0; | |
| 1030 if(sensor3) | |
| 1031 sensor3[i] = 0; | |
| 1032 if(cns) | |
| 1033 cns[i] = 0; | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1034 if(tank) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1035 tank[i] = 0; |
| 38 | 1036 } |
| 1037 //We start with fist gasid | |
| 1038 gasidLast = firstgasid; | |
| 1039 | |
| 1040 | |
| 1041 //uint16_t* ppo2, uint16_t* cns# | |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1042 uint32_t totalNumberOfBytes = 0; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1043 uint32_t bytesRead = 0; |
| 38 | 1044 ext_flash_open_read_sample( StepBackwards,&totalNumberOfBytes); |
| 1045 ext_flash_read_next_sample_part((uint8_t*)&smallHeader, sizeof(SSmallHeader)); | |
| 1046 bytesRead += sizeof(SSmallHeader); | |
| 1047 | |
| 1048 clear_divisor(); | |
| 1049 | |
| 1050 iNum = 0; | |
| 1051 int counter = 0; | |
| 1052 temperatureLast = -1000; | |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1053 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1054 small_profileLength = (smallHeader.profileLength[2] << 16) + (smallHeader.profileLength[1] << 8) + smallHeader.profileLength[0]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1055 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1056 if(totalNumberOfBytes == small_profileLength) /* sizes provided by header and small header are the same => real data */ |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1057 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1058 while ((bytesRead < totalNumberOfBytes) && (iNum < length)) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1059 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1060 ext_flash_set_entry_point(); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1061 divisorBackup = divisor; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1062 retVal = readSample(&depthVal,&gasidVal, &setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1063 &bailoutVal, &decostepDepthVal, &tankVal); |
| 38 | 1064 |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1065 if(retVal == 0) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1066 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1067 //Error try to read again!!! |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1068 ext_flash_reopen_read_sample_at_entry_point(); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1069 divisor = divisorBackup; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1070 retVal = readSample(&depthVal,&gasidVal,&setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1071 &manualGasVal, &bailoutVal, &decostepDepthVal, &tankVal); |
| 38 | 1072 |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1073 if(retVal == 0) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1074 break; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1075 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1076 bytesRead +=retVal; |
| 38 | 1077 |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1078 //if for some variable no new value is in the sample for (z.B. gasidVal = -1), we take the last value |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1079 if(depthVal == -1) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1080 depthVal = depthLast; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1081 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1082 depthLast = depthVal; |
| 38 | 1083 |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1084 if(gasidVal == -1) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1085 gasidVal = gasidLast; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1086 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1087 gasidLast = gasidVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1088 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1089 if(temperatureVal == -1000) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1090 temperatureVal = temperatureLast; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1091 else |
| 38 | 1092 { |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1093 if(temperatureLast == -1000) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1094 temperatureFirst = temperatureVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1095 temperatureLast = temperatureVal; |
| 38 | 1096 } |
| 1097 | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1098 if(setPointVal == -1) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1099 setPointVal = setPointLast; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1100 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1101 setPointLast = setPointVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1102 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1103 if(sensor1Val == -1) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1104 sensor1Val = sensor1Last; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1105 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1106 sensor1Last = sensor1Val; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1107 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1108 if(sensor2Val == -1) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1109 sensor2Val = sensor2Last; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1110 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1111 sensor2Last = sensor2Val; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1112 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1113 if(sensor3Val == -1) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1114 sensor3Val = sensor3Last; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1115 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1116 sensor3Last = sensor3Val; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1117 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1118 if(cnsVal == -1) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1119 cnsVal = cnsLast; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1120 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1121 cnsLast = cnsVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1122 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1123 if(manualGasVal.percentageO2 == -1) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1124 manualGasVal = manualGasLast; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1125 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1126 manualGasLast = manualGasVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1127 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1128 if(bailoutVal == -1) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1129 bailoutVal = bailoutLast; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1130 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1131 bailoutLast = bailoutVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1132 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1133 if(decostepDepthVal == -1) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1134 decostepDepthVal = decostepDepthLast; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1135 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1136 decostepDepthLast = decostepDepthVal; |
| 38 | 1137 |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1138 counter++; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1139 // Heed compression |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1140 // Write here to arrays |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1141 if(counter == compression) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1142 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1143 if(depth) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1144 depth[iNum] = depthVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1145 if(gasid) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1146 gasid[iNum] = gasidVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1147 if(temperature) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1148 temperature[iNum] = temperatureVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1149 if(cns) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1150 cns[iNum] = cnsVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1151 if(bailout) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1152 bailout[iNum] = bailoutVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1153 if(decostopDepth) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1154 decostopDepth[iNum] = decostepDepthVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1155 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1156 if(ppo2) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1157 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1158 //Calc ppo2 - Values |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1159 SGas gas; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1160 gas.setPoint_cbar = setPointVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1161 if(gasidVal > 0) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1162 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1163 gas.helium_percentage = header.gasordil[gasidVal - 1].helium_percentage; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1164 gas.nitrogen_percentage = 100 - gas.helium_percentage - header.gasordil[gasidVal - 1].oxygen_percentage; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1165 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1166 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1167 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1168 gas.helium_percentage = manualGasVal.percentageHe; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1169 gas.nitrogen_percentage = 100 - gas.helium_percentage - manualGasVal.percentageO2; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1170 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1171 ambiant_pressure_bar =((float)(depthVal + header.surfacePressure_mbar))/1000; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1172 ppO2 = decom_calc_ppO2(ambiant_pressure_bar, &gas ); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1173 ppo2[iNum] = (uint16_t) ( ppO2 * 100); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1174 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1175 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1176 if(tank) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1177 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1178 tank[iNum] = tankVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1179 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1180 if(setpoint) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1181 setpoint[iNum] = setPointVal; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1182 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1183 if(sensor1) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1184 sensor1[iNum] = (sensor1Val / 0xFFFF) & 0xFF; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1185 if(sensor2) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1186 sensor2[iNum] = (sensor2Val / 0xFFFF) & 0xFF; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1187 if(sensor3) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1188 sensor3[iNum] = (sensor3Val / 0xFFFF) & 0xFF; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1189 iNum++; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1190 counter = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1191 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1192 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1193 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1194 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1195 { |
| 458 | 1196 logbook_createDummyProfile(&header, numSamples, depth, temperature, ppo2); |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1197 iNum = numSamples; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1198 } |
| 38 | 1199 |
| 1200 // Fix first Temperature Entries 150930 hw | |
| 1201 if(temperature) | |
| 1202 { | |
| 1203 int i = 0; | |
| 1204 while((temperature[i] == -1000) && (i < iNum)) | |
| 1205 temperature[i++] = temperatureFirst; | |
| 1206 } | |
| 1207 | |
| 1208 ext_flash_close_read_sample(); | |
| 1209 return iNum; | |
| 1210 } | |
| 1211 | |
| 1212 | |
| 1213 /******************************************************************************** | |
| 1214 * @brief logbook_InitAndWrite. / Controls writing of logbook | |
| 1215 * Should be called ten times per second | |
| 1216 * Automatically Initializes logbook at beginning of dive, | |
| 1217 * write samples every 2 seconds | |
| 1218 * and finishes logbook after end of dive | |
| 1219 *********************************************************************************/ | |
| 1220 | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1221 void logbook_InitAndWrite(const SDiveState *pStateReal) |
| 38 | 1222 { |
| 1223 SSettings *pSettings = settingsGetPointer(); | |
| 1224 static uint8_t bDiveMode = 0; | |
| 1225 static uint32_t tickstart = 0; | |
| 1226 uint32_t ticksdiff = 0; | |
| 1227 uint32_t lasttick = 0; | |
| 1228 static float min_temperature_float_celsius = 0; | |
| 1229 | |
| 1230 if(!bDiveMode) | |
| 1231 { | |
| 1232 if((pStateReal->mode == MODE_DIVE) && (pStateReal->diveSettings.diveMode != DIVEMODE_Apnea) && (pStateReal->lifeData.dive_time_seconds >= 5)) | |
| 1233 { | |
| 1234 //InitdiveProfile | |
| 1235 pSettings->totalDiveCounter++; | |
| 1236 logbook_initNewdiveProfile(pStateReal,settingsGetPointer()); | |
| 1237 min_temperature_float_celsius = pStateReal->lifeData.temperature_celsius; | |
| 1238 //Write logbook sample | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1239 logbook_writeSample(pStateReal); |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1240 resetEvents(pStateReal); |
| 38 | 1241 tickstart = HAL_GetTick(); |
| 1242 bDiveMode = 1; | |
| 1243 } | |
| 1244 } | |
| 1245 else if((pStateReal->mode == MODE_DIVE) && (pStateReal->diveSettings.diveMode != DIVEMODE_Apnea)) | |
| 1246 { | |
| 1247 lasttick = HAL_GetTick(); | |
| 1248 ticksdiff = time_elapsed_ms(tickstart,lasttick); | |
| 1249 // | |
| 1250 if(ticksdiff >= 2000) | |
| 1251 { | |
| 1252 //Write logbook sample | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1253 logbook_writeSample(pStateReal); |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1254 resetEvents(pStateReal); |
| 38 | 1255 if(min_temperature_float_celsius > pStateReal->lifeData.temperature_celsius) |
| 1256 min_temperature_float_celsius = pStateReal->lifeData.temperature_celsius; | |
| 1257 tickstart = lasttick; | |
| 1258 if((bDiveMode == 1) && (pStateReal->lifeData.dive_time_seconds >= pSettings->divetimeToCreateLogbook)) | |
| 1259 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1260 ext_flash_create_new_dive_log((uint8_t*)&gheader); |
| 38 | 1261 /** save settings |
| 1262 * with new lastDiveLogId and time and day | |
| 1263 */ | |
| 1264 pSettings->personalDiveCount++; | |
| 1265 if(pSettings->logbookOffset) | |
| 1266 { | |
| 1267 pSettings->logbookOffset++; | |
| 1268 } | |
| 427 | 1269 ext_flash_write_settings(0); |
| 38 | 1270 ext_flash_disable_protection_for_logbook(); |
|
426
514e6269256f
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
411
diff
changeset
|
1271 |
|
514e6269256f
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
411
diff
changeset
|
1272 ext_flash_CloseSector(); /* this is just a repair function which invalidates a not used sector in case a log maintenance was called before dive */ |
| 38 | 1273 bDiveMode = 3; |
| 1274 } | |
| 1275 if(bDiveMode == 3) | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1276 logbook_UpdateHeader(pStateReal); |
| 38 | 1277 } |
| 1278 } | |
| 1279 else if(bDiveMode == 3) | |
| 1280 { | |
| 1281 //End of Dive | |
| 1282 logbook_SetAverageDepth(pStateReal->lifeData.average_depth_meter); | |
| 1283 logbook_SetMinTemperature(min_temperature_float_celsius); | |
| 1284 logbook_SetMaxCNS(pStateReal->lifeData.cns); | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1285 logbook_SetCompartmentDesaturation(pStateReal); |
| 38 | 1286 logbook_SetLastStop(pStateReal->diveSettings.last_stop_depth_bar); |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1287 gheader.batteryVoltage = pStateReal->lifeData.battery_voltage * 1000; |
|
471
73da921869d9
bugfix: implement battery charge percentage in dive header
Jan Mulder <jlmulder@xs4all.nl>
parents:
465
diff
changeset
|
1288 gheader.batteryCharge = pStateReal->lifeData.battery_charge; |
| 38 | 1289 logbook_EndDive(); |
| 1290 bDiveMode = 0; | |
| 1291 } else | |
| 1292 { | |
| 1293 ext_flash_enable_protection(); | |
| 1294 } | |
| 1295 } | |
| 1296 | |
| 1297 | |
| 1298 /* Private functions ---------------------------------------------------------*/ | |
| 1299 | |
| 1300 /******************************************************************************** | |
| 1301 * @brief logbook_UpdateHeader. / | |
| 1302 * set date, time, max depth. etc. pp. | |
| 1303 * the internal pointer to the end of profile and length will be set by | |
| 1304 ext_flash_close_new_dive_log() in externLogbookFlash.c | |
| 1305 * @author heinrichs weikamp gmbh | |
| 1306 * @version V0.0.1 | |
| 1307 * @date 27-Nov-2014 | |
| 1308 *********************************************************************************/ | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1309 static void logbook_UpdateHeader(const SDiveState *pStateReal) |
| 38 | 1310 { |
| 1311 // uint16_t secondsAtShallow = 0; | |
| 1312 RTC_DateTypeDef Sdate; | |
| 1313 RTC_TimeTypeDef Stime; | |
| 1314 uint32_t time1_u32, time2_u32; | |
| 1315 uint32_t divetimeHelper; | |
| 1316 | |
| 1317 /* time and day */ | |
| 1318 /* don't update CHANGE 160224 hw, maybe save actual time and date at other place | |
| 1319 translateDate(pStateReal->lifeData.dateBinaryFormat, &Sdate); | |
| 1320 translateTime(pStateReal->lifeData.timeBinaryFormat, &Stime); | |
| 1321 | |
| 1322 header.dateYear = Sdate.Year; | |
| 1323 header.dateMonth = Sdate.Month; | |
| 1324 header.dateDay = Sdate.Date; | |
| 1325 header.timeHour = Stime.Hours; | |
| 1326 header.timeMinute = Stime.Minutes; | |
| 1327 */ | |
| 1328 /// 160315 Quick fix for empty date problem | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1329 if((!(gheader.dateYear)) || (!(gheader.dateMonth)) || (!(gheader.dateDay))) |
| 38 | 1330 { |
| 1331 translateDate(pStateReal->lifeData.dateBinaryFormat, &Sdate); | |
| 1332 translateTime(pStateReal->lifeData.timeBinaryFormat, &Stime); | |
| 1333 | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1334 gheader.dateYear = Sdate.Year; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1335 gheader.dateMonth = Sdate.Month; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1336 gheader.dateDay = Sdate.Date; |
| 38 | 1337 |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1338 time1_u32 = (uint32_t)gheader.timeMinute + (uint32_t)(gheader.timeHour * 60); |
| 38 | 1339 time2_u32 = (uint32_t)Stime.Minutes + (uint32_t)(Stime.Hours * 60); |
| 1340 if(time2_u32 < time1_u32) | |
| 1341 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1342 if(gheader.dateDay > 1) |
| 38 | 1343 { |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1344 gheader.dateDay -= 1; |
| 38 | 1345 } |
| 1346 else | |
| 1347 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1348 gheader.dateMonth --; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1349 if(!gheader.dateMonth) |
| 38 | 1350 { |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1351 gheader.dateYear--; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1352 gheader.dateMonth = 12; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1353 gheader.dateDay = 31; |
| 38 | 1354 } |
| 1355 else | |
| 1356 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1357 if(gheader.dateMonth == 2) |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1358 gheader.dateDay = 28; |
| 38 | 1359 else |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1360 if((gheader.dateMonth == 4) || (gheader.dateMonth == 6) || (gheader.dateMonth == 9) || (gheader.dateMonth == 11)) |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1361 gheader.dateDay = 30; |
| 38 | 1362 else |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1363 gheader.dateDay = 31; |
| 38 | 1364 } |
| 1365 } | |
| 1366 } | |
| 1367 } | |
| 1368 | |
| 1369 /* duration */ | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1370 gheader.total_diveTime_seconds = pStateReal->lifeData.dive_time_seconds; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1371 gheader.maxDepth = pStateReal->lifeData.max_depth_meter * 100; |
| 38 | 1372 |
| 1373 /* old: | |
| 1374 | |
| 1375 secondsAtShallow = pSettings->timeoutDiveReachedZeroDepth; | |
| 1376 if(pStateReal->lifeData.dive_time_seconds <= secondsAtShallow) | |
| 1377 secondsAtShallow = 0; | |
| 1378 header.diveTimeMinutes = (header.total_diveTime_seconds - secondsAtShallow )/ 60; | |
| 1379 header.diveTimeSeconds = header.total_diveTime_seconds - secondsAtShallow - (header.diveTimeMinutes * 60); | |
| 1380 */ | |
| 1381 divetimeHelper = pStateReal->lifeData.dive_time_seconds_without_surface_time; | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1382 gheader.diveTimeMinutes = (uint16_t)(divetimeHelper/60); |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1383 divetimeHelper -= 60 * (uint32_t)gheader.diveTimeMinutes; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1384 gheader.diveTimeSeconds = (uint16_t)divetimeHelper; |
| 38 | 1385 |
| 1386 /* deco algorithm (final) */ | |
| 1387 if(pStateReal->diveSettings.deco_type.ub.standard == GF_MODE) | |
| 1388 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1389 gheader.decoModel = 1; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1390 gheader.gfLow_or_Vpm_conservatism = pStateReal->diveSettings.gf_low; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1391 gheader.gfHigh = pStateReal->diveSettings.gf_high; |
| 38 | 1392 } |
| 1393 else | |
| 1394 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1395 gheader.decoModel = 2; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1396 gheader.gfLow_or_Vpm_conservatism = pStateReal->diveSettings.vpm_conservatism; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1397 gheader.gfHigh = 0; |
| 38 | 1398 } |
| 1399 | |
| 1400 /* tissue load */ | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1401 memcpy(gheader.n2Compartments, pStateReal->lifeData.tissue_nitrogen_bar, 64); |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1402 memcpy(gheader.heCompartments, pStateReal->lifeData.tissue_helium_bar, 64); |
| 38 | 1403 |
| 1404 } | |
| 1405 | |
| 1406 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
1407 static void logbook_SetAverageDepth(float average_depth_meter) |
| 38 | 1408 { |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1409 gheader.averageDepth_mbar = (uint16_t)(average_depth_meter * 100); |
| 38 | 1410 } |
| 1411 | |
| 1412 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
1413 static void logbook_SetMinTemperature(float min_temperature_celsius) |
| 38 | 1414 { |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1415 gheader.minTemp = (int16_t)((min_temperature_celsius * 10.0f) + 0.5f); |
| 38 | 1416 } |
| 1417 | |
| 1418 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
1419 static void logbook_SetMaxCNS(float max_cns_percentage) |
| 38 | 1420 { |
| 1421 if(max_cns_percentage < 9999) | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1422 gheader.maxCNS = (uint16_t)(max_cns_percentage); |
| 38 | 1423 else |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1424 gheader.maxCNS = 9999; |
| 38 | 1425 } |
| 1426 | |
| 1427 | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1428 static void logbook_SetCompartmentDesaturation(const SDiveState * pStateReal) |
| 38 | 1429 { |
|
225
2bb1db22b5f5
cleanup: random set of cleanups
Jan Mulder <jlmulder@xs4all.nl>
parents:
199
diff
changeset
|
1430 SLifeData2 secondaryInformation = { 0 }; |
| 38 | 1431 |
| 1432 decom_tissues_desaturation_time(&pStateReal->lifeData, &secondaryInformation); | |
| 1433 for(int i=0;i<16;i++) | |
| 1434 { | |
| 1435 if(secondaryInformation.tissue_nitrogen_desaturation_time_minutes[i] <= (15 * 255)) | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1436 gheader.n2CompartDesatTime_min[i] = (uint8_t)((secondaryInformation.tissue_nitrogen_desaturation_time_minutes[i] + 14) / 15); |
| 38 | 1437 else |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1438 gheader.n2CompartDesatTime_min[i] = 255; |
| 38 | 1439 if(secondaryInformation.tissue_helium_desaturation_time_minutes[i] <= (15 * 255)) |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1440 gheader.heCompartDesatTime_min[i] = (uint8_t)((secondaryInformation.tissue_helium_desaturation_time_minutes[i] + 14 )/ 15); |
| 38 | 1441 else |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1442 gheader.heCompartDesatTime_min[i] = 255; |
| 38 | 1443 } |
| 1444 } | |
| 1445 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
1446 static void logbook_SetLastStop(float last_stop_depth_bar) |
| 38 | 1447 { |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1448 gheader.lastDecostop_m = (uint8_t)(last_stop_depth_bar / 10.0f); |
| 38 | 1449 } |
| 1450 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
1451 static void logbook_writedata(void * data, int length_byte) |
| 38 | 1452 { |
| 1453 ext_flash_write_sample(data, length_byte); | |
| 1454 } | |
| 1455 | |
| 1456 /******************************************************************************** | |
| 1457 * @brief logbook_build_ostc3header. / | |
| 1458 * @author heinrichs weikamp gmbh | |
| 1459 * @version V0.0.2 | |
| 1460 * @date 27-Nov-2014 | |
| 1461 *********************************************************************************/ | |
| 1462 SLogbookHeaderOSTC3 * logbook_build_ostc3header(SLogbookHeader* pHead) | |
| 1463 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1464 convert_Type data,data2; |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1465 uint16_t dummyLength = 0; |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1466 uint8_t returnEmptyHeader = 0; |
| 38 | 1467 |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1468 uint32_t headerProfileLength, sampleProfileLength, sampleProfileStart; |
| 38 | 1469 |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1470 |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1471 if(pHead->diveHeaderStart != 0xFAFA) |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1472 { |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1473 returnEmptyHeader = 1; |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1474 } |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1475 else |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1476 { |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1477 memcpy(headerOSTC3.diveHeaderStart, &pHead->diveHeaderStart, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1478 memcpy(headerOSTC3.pBeginProfileData, &pHead->pBeginProfileData, 3); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1479 memcpy(headerOSTC3.pEndProfileData, &pHead->pEndProfileData, 3); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1480 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1481 data.u8bit.byteHigh = 0; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1482 data.u8bit.byteLow = pHead->pBeginProfileData[0]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1483 data.u8bit.byteMidLow = pHead->pBeginProfileData[1]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1484 data.u8bit.byteMidHigh = pHead->pBeginProfileData[2]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1485 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1486 sampleProfileStart = data.u32bit; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1487 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1488 data2.u8bit.byteHigh = 0; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1489 data2.u8bit.byteLow = pHead->pEndProfileData[0]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1490 data2.u8bit.byteMidLow = pHead->pEndProfileData[1]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1491 data2.u8bit.byteMidHigh = pHead->pEndProfileData[2]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1492 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1493 data.u8bit.byteHigh = 0; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1494 data.u8bit.byteLow = pHead->profileLength[0]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1495 data.u8bit.byteMidLow = pHead->profileLength[1]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1496 data.u8bit.byteMidHigh = pHead->profileLength[2]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1497 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1498 if(data.u32bit != 0xFFFFFF) /* if the profile in use ? */ |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1499 { |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1500 if(data2.u32bit < sampleProfileStart) /* Wrap around of sample ring detected */ |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1501 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1502 if(ext_flash_SampleOverrunValid() == 0) /* Wrap around does not seem to be valid => fallback */ |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1503 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1504 sampleProfileStart = 0; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1505 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1506 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1507 if( sampleProfileStart == 0) /* should never happen unless OSTC with older debug version is in use (or invalid overrun) */ |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1508 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1509 sampleProfileLength = 1; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1510 headerProfileLength = 2; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1511 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1512 else |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1513 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1514 headerProfileLength = (pHead->profileLength[2] << 16) + (pHead->profileLength[1] << 8) + pHead->profileLength[0]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1515 sampleProfileLength = ext_flash_read_profilelength_small_header(sampleProfileStart); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1516 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1517 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1518 if(sampleProfileLength != headerProfileLength) |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1519 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1520 dummyLength = logbook_fillDummySampleBuffer(pHead); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1521 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1522 data2.u32bit = sampleProfileStart + dummyLength; /* calc new end address (which is equal to dummyLength) */ |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1523 data.u32bit = dummyLength; /* data is used below to represent the length */ |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1524 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1525 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1526 data.u32bit += 3; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1527 headerOSTC3.profileLength[0] = data.u8bit.byteLow; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1528 headerOSTC3.profileLength[1] = data.u8bit.byteMidLow; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1529 headerOSTC3.profileLength[2] = data.u8bit.byteMidHigh; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1530 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1531 memcpy(headerOSTC3.gasordil, pHead->gasordil, 20); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1532 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1533 if(pHead->logbookProfileVersion == LOGBOOK_VERSION) |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1534 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1535 headerOSTC3.logbookProfileVersion = LOGBOOK_VERSION_OSTC3; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1536 memcpy(headerOSTC3.personalDiveCount, &pHead->personalDiveCount, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1537 headerOSTC3.safetyDistance_10cm = 0; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1538 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1539 for(int i=0;i<5;i++) |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1540 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1541 if(!pHead->gasordil[i].note.ub.active) |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1542 headerOSTC3.gasordil[3 + (i*4)] = 0; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1543 else if(pHead->gasordil[i].note.ub.first) |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1544 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1545 /* depth = 0, note = 1 */ |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1546 headerOSTC3.gasordil[2 + (i*4)] = 0; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1547 headerOSTC3.gasordil[3 + (i*4)] = 1; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1548 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1549 else if( pHead->gasordil[i].depth_meter) |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1550 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1551 /* note = 3 */ |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1552 headerOSTC3.gasordil[3 + (i*4)] = 3; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1553 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1554 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1555 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1556 else |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1557 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1558 headerOSTC3.logbookProfileVersion = 0xFF; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1559 headerOSTC3.personalDiveCount[0] = 0xFF; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1560 headerOSTC3.personalDiveCount[1] = 0xFF; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1561 headerOSTC3.safetyDistance_10cm = 0xFF; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1562 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1563 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1564 headerOSTC3.dateYear = pHead->dateYear; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1565 headerOSTC3.dateMonth = pHead->dateMonth; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1566 headerOSTC3.dateDay = pHead->dateDay; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1567 headerOSTC3.timeHour = pHead->timeHour; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1568 headerOSTC3.timeMinute = pHead->timeMinute; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1569 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1570 memcpy(headerOSTC3.maxDepth, &pHead->maxDepth, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1571 memcpy(headerOSTC3.diveTimeMinutes, &pHead->diveTimeMinutes, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1572 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1573 headerOSTC3.diveTimeSeconds = pHead->diveTimeSeconds; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1574 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1575 memcpy(headerOSTC3.minTemp, &pHead->minTemp, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1576 memcpy(headerOSTC3.surfacePressure_mbar,&pHead->surfacePressure_mbar, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1577 memcpy(headerOSTC3.desaturationTime, &pHead->desaturationTime, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1578 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1579 headerOSTC3.firmwareVersionHigh = pHead->firmwareVersionHigh; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1580 headerOSTC3.firmwareVersionLow = pHead->firmwareVersionLow; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1581 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1582 memcpy(headerOSTC3.batteryVoltage, &pHead->batteryVoltage, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1583 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1584 headerOSTC3.samplingRate = pHead->samplingRate; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1585 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1586 memcpy(headerOSTC3.cnsAtBeginning, &pHead->cnsAtBeginning, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1587 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1588 headerOSTC3.gfAtBeginning = pHead->gfAtBeginning; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1589 headerOSTC3.gfAtEnd = pHead->gfAtEnd; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1590 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1591 memcpy(headerOSTC3.setpoint, pHead->setpoint, 10); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1592 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1593 headerOSTC3.salinity = pHead->salinity; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1594 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1595 memcpy(headerOSTC3.maxCNS, &pHead->maxCNS, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1596 memcpy(headerOSTC3.averageDepth_mbar, &pHead->averageDepth_mbar, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1597 memcpy(headerOSTC3.total_diveTime_seconds, &pHead->total_diveTime_seconds, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1598 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1599 headerOSTC3.gfLow_or_Vpm_conservatism = pHead->gfLow_or_Vpm_conservatism; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1600 headerOSTC3.gfHigh = pHead->gfHigh; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1601 headerOSTC3.decoModel = pHead->decoModel; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1602 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1603 memcpy(headerOSTC3.diveNumber, &pHead->diveNumber, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1604 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1605 headerOSTC3.diveMode = pHead->diveMode; |
|
471
73da921869d9
bugfix: implement battery charge percentage in dive header
Jan Mulder <jlmulder@xs4all.nl>
parents:
465
diff
changeset
|
1606 headerOSTC3.batteryCharge = pHead->batteryCharge; |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1607 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1608 memcpy(headerOSTC3.n2CompartDesatTime_min,pHead->n2CompartDesatTime_min, 16); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1609 memcpy(headerOSTC3.n2Compartments, pHead->n2Compartments, 64); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1610 memcpy(headerOSTC3.heCompartDesatTime_min,pHead->heCompartDesatTime_min, 16); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1611 memcpy(headerOSTC3.heCompartments, pHead->heCompartments, 64); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1612 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1613 headerOSTC3.lastDecostop_m = pHead->lastDecostop_m; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1614 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1615 memcpy(headerOSTC3.hwHudBattery_mV, &pHead->hwHudBattery_mV, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1616 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1617 headerOSTC3.hwHudLastStatus = pHead->hwHudLastStatus; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1618 |
| 483 | 1619 memset(headerOSTC3.batteryGaugeRegisters, 0x00, 6); /* The battery registers are not evaluated => Set to zero */ |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1620 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1621 memcpy(headerOSTC3.diveHeaderEnd, &pHead->diveHeaderEnd, 2); |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1622 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1623 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1624 { |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1625 returnEmptyHeader = 1; |
| 38 | 1626 } |
| 1627 } | |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1628 if(returnEmptyHeader) /* profile not in use => return array full of 0xFF */ |
| 38 | 1629 { |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1630 memset(&headerOSTC3, 0xFF, sizeof(headerOSTC3)); |
| 38 | 1631 } |
| 1632 | |
| 1633 return &headerOSTC3; | |
| 1634 } | |
| 1635 | |
| 1636 | |
| 1637 /******************************************************************************** | |
| 1638 * @brief logbook_build_ostc3header_compact. / | |
| 1639 * @author heinrichs weikamp gmbh | |
| 1640 * @version V0.0.1 | |
| 1641 * @date 31-Juli-2015 | |
| 1642 *********************************************************************************/ | |
| 1643 SLogbookHeaderOSTC3compact * logbook_build_ostc3header_compact(SLogbookHeader* pHead) | |
| 1644 { | |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1645 uint8_t returnEmptyHeader = 0; |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1646 convert_Type data, data2; |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1647 uint32_t dummyLength = 0; |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1648 uint32_t headerProfileLength, sampleProfileLength, sampleProfileStart; |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1649 |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1650 if(pHead->diveHeaderStart != 0xFAFA) |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1651 { |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1652 returnEmptyHeader = 1; |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1653 } |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1654 else |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1655 { |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1656 data.u8bit.byteHigh = 0; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1657 data.u8bit.byteLow = pHead->pBeginProfileData[0]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1658 data.u8bit.byteMidLow = pHead->pBeginProfileData[1]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1659 data.u8bit.byteMidHigh = pHead->pBeginProfileData[2]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1660 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1661 sampleProfileStart = data.u32bit; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1662 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1663 data2.u8bit.byteHigh = 0; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1664 data2.u8bit.byteLow = pHead->pEndProfileData[0]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1665 data2.u8bit.byteMidLow = pHead->pEndProfileData[1]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1666 data2.u8bit.byteMidHigh = pHead->pEndProfileData[2]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1667 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1668 data.u8bit.byteHigh = 0; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1669 data.u8bit.byteLow = pHead->profileLength[0]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1670 data.u8bit.byteMidLow = pHead->profileLength[1]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1671 data.u8bit.byteMidHigh = pHead->profileLength[2]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1672 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1673 if(data.u32bit != 0xFFFFFF) |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1674 { |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1675 if(data2.u32bit < sampleProfileStart) /* Wrap around of sample ring detected */ |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1676 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1677 if(ext_flash_SampleOverrunValid() == 0) /* Wrap around does not seem to be valid => fallback */ |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1678 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1679 sampleProfileStart = 0; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1680 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1681 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1682 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1683 if( sampleProfileStart == 0) /* no sample data available => use dummy */ |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1684 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1685 sampleProfileLength = 1; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1686 headerProfileLength = 2; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1687 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1688 else |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1689 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1690 headerProfileLength = (pHead->profileLength[2] << 16) + (pHead->profileLength[1] << 8) + pHead->profileLength[0]; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1691 sampleProfileLength = ext_flash_read_profilelength_small_header(sampleProfileStart); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1692 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1693 if(sampleProfileLength != headerProfileLength) |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1694 { |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1695 dummyLength = logbook_fillDummySampleBuffer(pHead); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1696 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1697 data2.u32bit = sampleProfileStart + dummyLength; /* calc new end address (which is equal to dummyLength) */ |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1698 data.u32bit = dummyLength; /* data is used below to represent the length */ |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1699 } |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1700 data.u32bit += 3; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1701 headerOSTC3compact.profileLength[0] = data.u8bit.byteLow; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1702 headerOSTC3compact.profileLength[1] = data.u8bit.byteMidLow; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1703 headerOSTC3compact.profileLength[2] = data.u8bit.byteMidHigh; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1704 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1705 headerOSTC3compact.dateYear = pHead->dateYear; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1706 headerOSTC3compact.dateMonth = pHead->dateMonth; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1707 headerOSTC3compact.dateDay = pHead->dateDay; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1708 headerOSTC3compact.timeHour = pHead->timeHour; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1709 headerOSTC3compact.timeMinute = pHead->timeMinute; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1710 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1711 memcpy(headerOSTC3compact.maxDepth, &pHead->maxDepth, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1712 memcpy(headerOSTC3compact.diveTimeMinutes, &pHead->diveTimeMinutes, 2); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1713 |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1714 headerOSTC3compact.diveTimeSeconds = pHead->diveTimeSeconds; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1715 headerOSTC3compact.totalDiveNumberLow = pHead->diveNumber & 0xFF; |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1716 headerOSTC3compact.totalDiveNumberHigh = (uint8_t)(pHead->diveNumber/256); |
|
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1717 headerOSTC3compact.profileVersion = 0x24; // Logbook-Profile version, 0x24 = date and time is start not end |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1718 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1719 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1720 { |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1721 returnEmptyHeader = 1; |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1722 } |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1723 } |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1724 if(returnEmptyHeader) |
| 38 | 1725 { |
| 1726 memset(&headerOSTC3compact, 0xFF, sizeof(SLogbookHeaderOSTC3compact)); | |
| 1727 } | |
| 1728 return &headerOSTC3compact; | |
| 1729 } | |
| 1730 | |
| 1731 | |
| 1732 /** | |
| 1733 ****************************************************************************** | |
| 1734 * @brief logbook_readSampleData. / Reads sample data of whole logbook entry | |
| 281 | 1735 * @author heinrichs weikamp |
| 38 | 1736 * @version V0.0.1 |
| 1737 * @date 22-April-2014 | |
| 1738 ****************************************************************************** | |
| 1739 * | |
| 1740 * @param uint8_t StepBackwards: witch lookbook entry? | |
| 1741 * @param uint16_t length : maxlength of output arrays | |
| 1742 * @param int32_t* depth : output array | |
| 1743 * @param int16_t * gasid : output array | |
| 1744 * @param int32_t* temperature : output array | |
| 1745 * @param int32_t* ppo2 : output array | |
| 1746 * @param int32_t* cns : output array | |
| 1747 * @return length of output | |
| 1748 */ | |
| 1749 void logbook_recover_brokenlog(uint8_t headerId) | |
| 1750 { | |
| 1751 int16_t retVal; | |
| 1752 int32_t depthVal = 0; | |
| 1753 int16_t gasidVal = 0; | |
| 1754 int16_t setPointVal = 0; | |
| 1755 int16_t bailoutVal = 0; | |
| 1756 int32_t temperatureVal = 0; | |
| 1757 int32_t sensor1Val = 0; | |
| 1758 int32_t sensor2Val = 0; | |
| 1759 int32_t sensor3Val = 0; | |
| 1760 int32_t cnsVal = 0; | |
| 1761 SManualGas manualGasVal; | |
| 1762 | |
| 1763 //uint16_t* ppo2, uint16_t* cns# | |
| 1764 uint32_t bytesRead = 0; | |
| 1765 | |
| 1766 ext_flash_read_block_start(); | |
| 1767 ext_flash_read_next_sample_part((uint8_t*)&smallHeader, sizeof(SSmallHeader)); | |
| 1768 bytesRead += sizeof(SSmallHeader); | |
| 1769 | |
| 1770 clear_divisor(); | |
| 1771 | |
| 1772 | |
| 1773 int sampleCounter = 0; | |
| 1774 int maxdepth = 0; | |
| 1775 uint32_t avrdepth = 0; | |
| 1776 while (true) | |
| 1777 { | |
| 1778 | |
| 1779 ext_flash_set_entry_point(); | |
| 1780 divisorBackup = divisor; | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1781 retVal = readSample(&depthVal,&gasidVal, &setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, NULL, NULL); |
| 38 | 1782 if(retVal == 0) |
| 1783 { | |
| 1784 //Error try to read again!!! | |
| 1785 ext_flash_reopen_read_sample_at_entry_point(); | |
| 1786 divisor = divisorBackup; | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1787 retVal = readSample(&depthVal,&gasidVal, &setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, NULL, NULL); |
| 38 | 1788 |
| 1789 if(retVal == 0) | |
| 1790 { | |
| 1791 //Error try to read again!!! | |
| 1792 ext_flash_reopen_read_sample_at_entry_point(); | |
| 1793 divisor = divisorBackup; | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1794 retVal = readSample(&depthVal,&gasidVal, &setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, NULL, NULL); |
| 38 | 1795 |
| 1796 if(retVal == 0) | |
| 1797 { | |
| 1798 ext_flash_reopen_read_sample_at_entry_point(); | |
| 1799 break; | |
| 1800 } | |
| 1801 | |
| 1802 } | |
| 1803 } | |
| 1804 if(depthVal > maxdepth) | |
| 1805 maxdepth = depthVal; | |
| 1806 avrdepth += depthVal; | |
| 1807 sampleCounter++; | |
| 1808 bytesRead +=retVal; | |
| 1809 } | |
| 1810 avrdepth/= sampleCounter; | |
| 1811 ext_flash_close_read_sample(); | |
| 1812 SLogbookHeader header; | |
| 1813 | |
| 1814 ext_flash_read_dive_header2((uint8_t*) &header, headerId, false); | |
| 1815 header.total_diveTime_seconds = sampleCounter * header.samplingRate; | |
| 1816 header.diveTimeMinutes = header.total_diveTime_seconds /60; | |
| 1817 header.diveTimeSeconds = header.total_diveTime_seconds - header.diveTimeMinutes * 60; | |
| 1818 header.maxDepth = maxdepth; | |
| 1819 header.averageDepth_mbar = avrdepth; | |
| 1820 SSettings * settings = settingsGetPointer(); | |
| 1821 settings->lastDiveLogId = headerId; | |
| 1822 ext_flash_close_new_dive_log((uint8_t *)&header); | |
| 1823 } | |
| 1824 | |
| 458 | 1825 void logbook_createDummyProfile(SLogbookHeader* pHeader, uint16_t length, uint16_t* depth, int16_t* temperature, uint16_t* ppo2) |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1826 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1827 uint8_t drawDeco = 1; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1828 uint16_t index = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1829 uint16_t indexDescenStop = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1830 uint16_t indexAscendStart = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1831 uint16_t simDecentDepth = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1832 uint16_t simDecentStep = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1833 uint16_t simAcentDepth = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1834 uint16_t simAcentStep = 0; |
| 458 | 1835 float ambiant_pressure_bar = 0; |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1836 |
| 458 | 1837 simDecentStep = pHeader->maxDepth / (length / 6); /* first 1/6 for descend */ |
| 1838 simAcentStep = pHeader->maxDepth / (length / 3); /* first 1/3 for ascend */ | |
| 1839 | |
| 1840 SGas gas; | |
| 1841 | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1842 |
| 458 | 1843 if(ppo2) |
| 1844 { | |
| 1845 /* find first gas ID */ | |
| 1846 for(index = 0; index < NUM_GAS; index++) | |
| 1847 { | |
| 1848 if(pHeader->gasordil[index].note.ub.first) | |
| 1849 break; | |
| 1850 } | |
| 1851 if(index != NUM_GAS) | |
| 1852 { | |
| 1853 gas.helium_percentage = pHeader->gasordil[index].helium_percentage; | |
| 1854 gas.nitrogen_percentage = 100 - gas.helium_percentage - pHeader->gasordil[index].oxygen_percentage; | |
| 1855 } | |
| 1856 } | |
| 1857 | |
| 1858 while((index < length) && (simDecentDepth < pHeader->maxDepth)) /* draw decent */ | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1859 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1860 depth[index] = simDecentDepth; |
| 458 | 1861 temperature[index] = pHeader->minTemp; |
| 1862 if(ppo2) | |
| 1863 { | |
| 1864 ambiant_pressure_bar =((float)(depth[index] + pHeader->surfacePressure_mbar))/1000; | |
| 1865 ppo2[index] = (uint16_t) ((decom_calc_ppO2(ambiant_pressure_bar, &gas )) * 100); | |
| 1866 } | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1867 index++; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1868 simDecentDepth += simDecentStep; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1869 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1870 indexDescenStop = index; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1871 index = length -1; |
| 458 | 1872 while((index > indexDescenStop) && (simAcentDepth < pHeader->maxDepth)) /* draw ascend including max deco stop */ |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1873 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1874 depth[index] = simAcentDepth; |
| 458 | 1875 temperature[index] = pHeader->minTemp; |
| 1876 if(ppo2) | |
| 1877 { | |
| 1878 ambiant_pressure_bar =((float)(depth[index] + pHeader->surfacePressure_mbar))/1000; | |
| 1879 ppo2[index] = (uint16_t) ((decom_calc_ppO2(ambiant_pressure_bar, &gas )) * 100); | |
| 1880 } | |
| 1881 if((drawDeco) && (simAcentDepth < pHeader->lastDecostop_m)) /* draw deco step */ | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1882 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1883 drawDeco = length / 10; |
| 458 | 1884 while(drawDeco) |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1885 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1886 index--; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1887 depth[index] = simAcentDepth; |
| 458 | 1888 temperature[index] = pHeader->minTemp; |
| 1889 if(ppo2) | |
| 1890 { | |
| 1891 ambiant_pressure_bar =((float)(depth[index] + pHeader->surfacePressure_mbar))/1000; | |
| 1892 ppo2[index] = (uint16_t) ((decom_calc_ppO2(ambiant_pressure_bar, &gas )) * 100); | |
| 1893 } | |
| 1894 drawDeco--; | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1895 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1896 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1897 index--; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1898 simAcentDepth += simAcentStep; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1899 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1900 indexAscendStart = index; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1901 index = indexDescenStop; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1902 while(index <= indexAscendStart) /* draw isobar dive phase */ |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1903 { |
| 458 | 1904 depth[index] = pHeader->maxDepth; |
| 1905 temperature[index] = pHeader->minTemp; | |
| 1906 if(ppo2) | |
| 1907 { | |
| 1908 ambiant_pressure_bar =((float)(depth[index] + pHeader->surfacePressure_mbar))/1000; | |
| 1909 ppo2[index] = (uint16_t) ((decom_calc_ppO2(ambiant_pressure_bar, &gas )) * 100); | |
| 1910 } | |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1911 index++; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1912 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1913 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1914 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1915 void logbook_resetDummy() |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1916 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1917 dummyWriteIdx = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1918 dummyReadIdx = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1919 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1920 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1921 void logbook_writeDummy(void* data, uint16_t length) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1922 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1923 memcpy(&dummyMemoryBuffer[dummyWriteIdx],(uint8_t *)data, length); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1924 dummyWriteIdx += length; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1925 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1926 void logbook_writeDummySample(uint16_t depth, int16_t temperature) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1927 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1928 uint8_t sample[10]; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1929 int length = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1930 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1931 int i = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1932 for(i = 0; i <10 ;i++) sample[i] = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1933 addU16(sample, depth); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1934 length += 2; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1935 sample[2] = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1936 length++; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1937 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1938 if(divisor.temperature == 0) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1939 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1940 divisor.temperature = smallHeader.tempDivisor - 1; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1941 addS16(&sample[length], temperature); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1942 length += 2; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1943 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1944 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1945 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1946 divisor.temperature--; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1947 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1948 |
|
465
2c2df051e554
Compare profile length from header and sample data to identify valid profiles
ideenmodellierer
parents:
458
diff
changeset
|
1949 logbook_writeDummy((void *) sample,length); |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1950 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1951 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1952 |
| 458 | 1953 uint16_t logbook_fillDummySampleBuffer(SLogbookHeader* pHeader) |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1954 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1955 uint16_t depthArray[DUMMY_SAMPLES]; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1956 int16_t temperatureArray[DUMMY_SAMPLES]; |
| 458 | 1957 uint16_t ppo2Array[DUMMY_SAMPLES]; |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1958 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1959 uint16_t index = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1960 uint16_t dummyBufferSize = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1961 uint16_t dummyProfileLength = 0; |
| 458 | 1962 uint32_t overallSecond = pHeader->diveTimeMinutes * 60 + pHeader->diveTimeSeconds; |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1963 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1964 logbook_resetDummy(); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1965 clear_divisor(); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1966 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1967 smallDummyHeader.profileLength[0] = 0xFF; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1968 smallDummyHeader.profileLength[1] = 0xFF; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1969 smallDummyHeader.profileLength[2] = 0xFF; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1970 smallDummyHeader.samplingRate_seconds = 2; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1971 smallDummyHeader.numDivisors = 7; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1972 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1973 smallDummyHeader.tempType = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1974 smallDummyHeader.tempLength = 2; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1975 smallDummyHeader.tempDivisor = 6; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1976 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1977 smallDummyHeader.deco_ndlType = 1; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1978 smallDummyHeader.deco_ndlLength = 2; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1979 smallDummyHeader.deco_ndlDivisor = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1980 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1981 /* GF in % at actual position */ |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1982 smallDummyHeader.gfType = 2; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1983 smallDummyHeader.gfLength = 1; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1984 smallDummyHeader.gfDivisor = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1985 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1986 /* 3 Sensors: 8bit ppO2 in 0.01bar, 16bit voltage in 0,1mV */ |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1987 smallDummyHeader.ppo2Type = 3; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1988 smallDummyHeader.ppo2Length = 9; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1989 smallDummyHeader.ppo2Divisor = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1990 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1991 /* last 15 stops in minutes (last, second_to_last, ... */ |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1992 /* last stop depth is defined in header */ |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1993 smallDummyHeader.decoplanType = 4; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1994 smallDummyHeader.decoplanLength = 15; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1995 smallDummyHeader.decoplanDivisor = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1996 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1997 smallDummyHeader.cnsType = 5; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1998 smallDummyHeader.cnsLength = 2; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
1999 smallDummyHeader.cnsDivisor = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2000 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2001 smallDummyHeader.tankType = 6; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2002 smallDummyHeader.tankLength = 2; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2003 smallDummyHeader.tankDivisor = 0; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2004 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2005 if((overallSecond / smallDummyHeader.samplingRate_seconds) > DUMMY_SAMPLES) /* reduce sample interval to keep buffer size */ |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2006 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2007 smallDummyHeader.samplingRate_seconds = overallSecond / DUMMY_SAMPLES; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2008 dummyProfileLength = DUMMY_SAMPLES; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2009 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2010 else |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2011 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2012 dummyProfileLength = overallSecond / smallDummyHeader.samplingRate_seconds; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2013 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2014 logbook_writeDummy((void *) &smallDummyHeader,sizeof(smallDummyHeader)); |
| 458 | 2015 logbook_createDummyProfile(pHeader,dummyProfileLength, depthArray, temperatureArray, ppo2Array ); |
|
455
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2016 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2017 for (index = 0; index < dummyProfileLength; index++) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2018 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2019 logbook_writeDummySample(depthArray[index], temperatureArray[index]); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2020 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2021 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2022 dummyBufferSize = dummyWriteIdx; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2023 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2024 return dummyBufferSize; /* return size of dummy buffer */ |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2025 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2026 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2027 void logbook_readDummySamples(uint8_t* pTarget, uint16_t length) |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2028 { |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2029 memcpy(pTarget,&dummyMemoryBuffer[dummyReadIdx],length); |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2030 dummyReadIdx += length; |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2031 } |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2032 |
|
928a14568689
Reactivated samples for bottle pressure information:
ideenmodellierer
parents:
445
diff
changeset
|
2033 |
| 38 | 2034 /************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/ |