Mercurial > public > ostc4
annotate Discovery/Src/data_exchange_main.c @ 924:4d98fb2a178e Evo_2_23
Bugfix real scrubber time decreased in sim mode:
In the previous version the condition check for dive / simulation had been commented out causing the scrubber timer to be decreased during simulator usage. The problem has been fixed. In addition the scrubbertimer will now be maintained in simulator mode. In case the +5 minutes option is used the scrubber time is decreased by 5 minutes as well.
| author | Ideenmodellierer |
|---|---|
| date | Wed, 13 Nov 2024 17:55:05 +0100 |
| parents | c4c9850a2039 |
| children | 908d9a8e8c84 |
| rev | line source |
|---|---|
| 38 | 1 /** |
| 2 ****************************************************************************** | |
| 3 * @file data_exchange_main.c | |
| 4 * @author heinrichs weikamp gmbh | |
| 5 * @date 13-Oct-2014 | |
| 6 * @version V0.0.3 | |
| 7 * @since 17-Feb-2016 | |
| 8 | |
| 9 * @brief Communication with the second CPU == RTE system | |
| 10 * | |
| 11 @verbatim | |
| 12 ============================================================================== | |
| 13 ##### Version Changes ##### | |
| 14 ============================================================================== | |
| 15 160217 V0.0.3 pStateUsed->decolistXXXXX.tickstamp = HAL_GetTick(); added | |
| 16 150627 V0.0.2 | |
| 17 | |
| 18 ============================================================================== | |
| 19 ##### How to use ##### | |
| 20 ============================================================================== | |
| 21 | |
| 22 ============================================================================== | |
| 23 ##### Button, Set Time, Clear Deco etc Request ##### | |
| 24 ============================================================================== | |
| 25 was updated (151207) for buttons and clear deco at the moment only | |
| 26 using requestNecessary and checking in DataEX_copy_to_LifeData() | |
| 27 Hence if there is no confirm from the smallCPU on the data after the request | |
| 28 the request will be send again. | |
| 29 | |
| 30 ============================================================================== | |
| 31 ##### Device Data ##### | |
| 32 ============================================================================== | |
| 33 | |
| 34 main CPU always sends the device data info that it has at the moment | |
| 35 | |
| 36 on start it is INT32_MIN, INT32_MAX and 0 | |
| 37 as initialized in data_central.c variable declaration | |
| 38 | |
| 39 second small CPU gets request to send its device data | |
| 40 | |
|
198
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
41 on reception the data is merged with the data in externLogbookFlash, |
| 38 | 42 stored on the externLogbookFlash and from now on send to small CPU |
| 43 | |
| 44 ============================================================================== | |
| 45 ##### Magnet Reset ##### | |
| 46 ============================================================================== | |
| 47 | |
| 48 @endverbatim | |
| 49 ****************************************************************************** | |
| 50 * @attention | |
| 51 * | |
| 52 * <h2><center>© COPYRIGHT(c) 2014 heinrichs weikamp</center></h2> | |
| 53 * | |
| 54 ****************************************************************************** | |
| 55 */ | |
| 56 | |
| 57 /* Includes ------------------------------------------------------------------*/ | |
|
133
acc98f5bd8c4
Intoduced transfer abort function for data exchange recovery
Ideenmodellierer
parents:
115
diff
changeset
|
58 #include <stdlib.h> |
|
198
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
59 #include <string.h> // for memcpy |
|
747
df0d43da1614
Added pressure compensation to CO2 detection:
Ideenmodellierer
parents:
734
diff
changeset
|
60 #include <math.h> |
| 38 | 61 #include "stm32f4xx_hal.h" |
| 62 #include "stdio.h" | |
| 63 #include "ostc.h" | |
| 64 #include "settings.h" | |
| 65 #include "data_central.h" | |
| 66 #include "data_exchange_main.h" | |
| 67 #include "base.h" | |
| 68 #include "decom.h" | |
| 69 #include "calc_crush.h" /* for vpm_init */ | |
| 70 #include "simulation.h" | |
| 71 #include "tCCR.h" | |
| 72 #include "timer.h" | |
| 73 #include "buehlmann.h" | |
| 74 #include "externLogbookFlash.h" | |
| 911 | 75 #include "vpm.h" |
| 38 | 76 |
| 662 | 77 /* #define TESTBENCH */ |
| 38 | 78 |
|
173
05c770dc2911
Bugfix: make max depth move with current depth (part 1)
Jan Mulder <jlmulder@xs4all.nl>
parents:
156
diff
changeset
|
79 /* Exported variables --------------------------------------------------------*/ |
|
198
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
80 static uint8_t wasPowerOn = 0; |
|
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
81 static confirmbit8_Type requestNecessary = { .uw = 0 }; |
|
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
82 static uint8_t wasUpdateNotPowerOn = 0; |
| 38 | 83 |
| 84 /* Private variables with external access ------------------------------------*/ | |
| 85 | |
| 86 /* Private variables ---------------------------------------------------------*/ | |
|
198
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
87 static uint8_t told_reset_logik_alles_ok = 0; |
| 559 | 88 static hw_Info_t hw_Info; |
| 38 | 89 |
|
198
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
90 static SDataReceiveFromMaster dataOut; |
|
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
91 static SDataExchangeSlaveToMaster dataIn; |
| 38 | 92 |
|
198
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
93 static uint8_t data_old__lost_connection_to_slave_counter_temp = 0; |
|
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
94 static uint8_t data_old__lost_connection_to_slave_counter_retry = 0; |
|
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
95 static uint32_t data_old__lost_connection_to_slave_counter_total = 0; |
| 38 | 96 |
|
406
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
97 static uint8_t DeviceDataUpdated = 0; |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
98 |
| 662 | 99 static uint16_t externalInterface_Cmd = 0; |
| 100 | |
| 38 | 101 /* Private types -------------------------------------------------------------*/ |
|
406
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
102 #define UNKNOWN_TIME_HOURS 1 |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
103 #define UNKNOWN_TIME_MINUTES 0 |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
104 #define UNKNOWN_TIME_SECOND 0 |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
105 #define UNKNOWN_DATE_DAY 1 |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
106 #define UNKNOWN_DATE_MONTH 1 |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
107 #define UNKNOWN_DATE_YEAR 16 |
| 38 | 108 |
|
577
9bb9a52d6ae5
Handle o2 voltage values < 0.5mV as invalid:
Ideenmodellierer
parents:
559
diff
changeset
|
109 |
| 38 | 110 /* Private function prototypes -----------------------------------------------*/ |
|
198
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
111 static uint8_t DataEX_check_header_and_footer_ok(void); |
|
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
112 static uint8_t DataEX_check_header_and_footer_shifted(void); |
|
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
113 static uint8_t DataEX_check_header_and_footer_devicedata(void); |
|
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
114 static void DataEX_check_DeviceData(void); |
| 38 | 115 |
| 116 /* Exported functions --------------------------------------------------------*/ | |
| 117 uint8_t DataEX_was_power_on(void) | |
| 118 { | |
| 119 return wasPowerOn; | |
| 120 } | |
| 121 | |
|
198
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
122 static uint8_t count_DataEX_Error_Handler = 0; |
|
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
123 static uint8_t last_error_DataEX_Error_Handler = 0; |
| 38 | 124 |
|
198
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
125 static void DataEX_Error_Handler(uint8_t answer) |
| 38 | 126 { |
| 127 count_DataEX_Error_Handler++; | |
| 128 last_error_DataEX_Error_Handler = answer; | |
|
133
acc98f5bd8c4
Intoduced transfer abort function for data exchange recovery
Ideenmodellierer
parents:
115
diff
changeset
|
129 |
|
156
1fbdb45db701
Removed special indicator for DMA transfer error
Ideenmodellierer
parents:
154
diff
changeset
|
130 /* A wrong footer indicates a communication interrupt. State machine is waiting for new data which is not received because no new transmission is triggered */ |
|
133
acc98f5bd8c4
Intoduced transfer abort function for data exchange recovery
Ideenmodellierer
parents:
115
diff
changeset
|
131 /* ==> Abort data exchange to enable a new RX / TX cycle */ |
|
acc98f5bd8c4
Intoduced transfer abort function for data exchange recovery
Ideenmodellierer
parents:
115
diff
changeset
|
132 if(answer == HAL_BUSY) |
|
acc98f5bd8c4
Intoduced transfer abort function for data exchange recovery
Ideenmodellierer
parents:
115
diff
changeset
|
133 { |
|
acc98f5bd8c4
Intoduced transfer abort function for data exchange recovery
Ideenmodellierer
parents:
115
diff
changeset
|
134 HAL_SPI_Abort_IT(&cpu2DmaSpi); |
|
acc98f5bd8c4
Intoduced transfer abort function for data exchange recovery
Ideenmodellierer
parents:
115
diff
changeset
|
135 } |
|
137
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
136 |
| 38 | 137 return; |
| 138 } | |
| 139 | |
| 140 | |
| 141 uint32_t DataEX_lost_connection_count(void) | |
| 142 { | |
| 143 return data_old__lost_connection_to_slave_counter_total; | |
| 144 } | |
| 145 | |
| 146 | |
|
198
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
147 SDataReceiveFromMaster *dataOutGetPointer(void) |
| 38 | 148 { |
| 149 return &dataOut; | |
| 150 } | |
| 151 | |
| 152 void DataEX_init(void) | |
| 153 { | |
| 154 SDiveState * pStateReal = stateRealGetPointerWrite(); | |
| 99 | 155 pStateReal->data_old__lost_connection_to_slave = 0; //initial value |
| 38 | 156 data_old__lost_connection_to_slave_counter_temp = 0; |
| 157 data_old__lost_connection_to_slave_counter_total = 0; | |
|
407
b11e50415982
Bugfix parallel call of external flash functions:
ideenmodellierer
parents:
406
diff
changeset
|
158 DeviceDataUpdated = 0; |
| 38 | 159 |
| 160 memset((void *)&dataOut, 0, sizeof(SDataReceiveFromMaster)); | |
| 161 | |
| 162 dataOut.header.checkCode[0] = 0xBB; | |
| 208 | 163 dataOut.header.checkCode[1] = SPI_RX_STATE_OK; |
| 164 dataOut.header.checkCode[2] = SPI_RX_STATE_OK; | |
| 38 | 165 dataOut.header.checkCode[3] = 0xBB; |
| 166 | |
| 167 dataOut.footer.checkCode[0] = 0xF4; | |
| 168 dataOut.footer.checkCode[1] = 0xF3; | |
| 169 dataOut.footer.checkCode[2] = 0xF2; | |
| 170 dataOut.footer.checkCode[3] = 0xF1; | |
| 171 } | |
| 172 | |
| 173 | |
|
198
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
174 static void DataEx_call_helper_requests(void) |
| 38 | 175 { |
| 176 static uint8_t setDateWasSend = 0; | |
| 177 static uint8_t setTimeWasSend = 0; | |
| 178 static uint8_t calibrateCompassWasSend = 0; | |
| 179 static uint8_t setButtonSensitivityWasSend = 0; | |
| 180 static uint8_t clearDecoWasSend = 0; | |
| 181 static uint8_t getDeviceDataWasSend = 0; | |
| 182 static uint8_t setAccidentFlagWasSend = 0; | |
| 183 static uint8_t setEndDiveWasSend = 0; | |
| 184 | |
| 185 if(getDeviceDataWasSend) | |
| 186 { | |
| 187 dataOut.getDeviceDataNow = 0; | |
| 188 } | |
| 189 getDeviceDataWasSend = 0; | |
| 190 if(dataOut.getDeviceDataNow) | |
| 191 { | |
| 192 getDeviceDataWasSend = 1; | |
| 662 | 193 requestNecessary.ub.devicedata = 1; |
| 38 | 194 } |
| 195 | |
| 196 if(setEndDiveWasSend) | |
| 197 { | |
| 198 dataOut.setEndDive = 0; | |
| 199 //requestNecessary.ub.XXX = 1; not implemented and no space here | |
| 200 } | |
| 201 setEndDiveWasSend = 0; | |
| 202 if(dataOut.setEndDive) | |
| 203 { | |
| 204 setEndDiveWasSend = 1; | |
| 205 } | |
| 206 | |
| 207 if(setAccidentFlagWasSend) | |
| 208 { | |
| 209 dataOut.setAccidentFlag = 0; | |
| 210 } | |
| 211 setAccidentFlagWasSend = 0; | |
| 212 if(dataOut.setAccidentFlag) | |
| 213 { | |
| 214 setAccidentFlagWasSend = 1; | |
| 662 | 215 requestNecessary.ub.accident = 1; |
| 38 | 216 } |
| 217 | |
| 218 if(setDateWasSend) | |
| 219 { | |
| 220 dataOut.setDateNow = 0; | |
| 221 } | |
| 222 setDateWasSend = 0; | |
| 223 if(dataOut.setDateNow) | |
| 224 { | |
| 225 setDateWasSend = 1; | |
| 662 | 226 requestNecessary.ub.date = 1; |
| 38 | 227 } |
| 228 | |
| 229 if(setTimeWasSend) | |
| 230 { | |
| 231 dataOut.setTimeNow = 0; | |
| 232 } | |
| 233 setTimeWasSend = 0; | |
| 234 if(dataOut.setTimeNow) | |
| 235 { | |
| 236 setTimeWasSend = 1; | |
| 662 | 237 requestNecessary.ub.time = 1; |
| 38 | 238 } |
| 239 | |
| 240 if(calibrateCompassWasSend) | |
| 241 { | |
| 242 dataOut.calibrateCompassNow = 0; | |
| 243 } | |
| 244 calibrateCompassWasSend = 0; | |
| 245 if(dataOut.calibrateCompassNow) | |
| 246 { | |
| 247 calibrateCompassWasSend = 1; | |
| 248 } | |
| 249 | |
| 250 if(clearDecoWasSend) | |
| 251 { | |
| 252 dataOut.clearDecoNow = 0; | |
| 662 | 253 requestNecessary.ub.compass = 1; |
| 38 | 254 } |
| 255 if(dataOut.clearDecoNow) | |
| 256 { | |
| 257 clearDecoWasSend = 1; | |
| 662 | 258 requestNecessary.ub.clearDeco = 1; |
| 38 | 259 } |
| 260 | |
| 261 if(setButtonSensitivityWasSend) | |
| 262 { | |
| 263 dataOut.setButtonSensitivityNow = 0; | |
| 264 } | |
| 265 setButtonSensitivityWasSend = 0; | |
| 266 if(dataOut.setButtonSensitivityNow) | |
| 267 { | |
| 268 setButtonSensitivityWasSend = 1; | |
| 662 | 269 requestNecessary.ub.button = 1; |
| 38 | 270 } |
| 271 } | |
| 272 | |
| 273 | |
| 274 uint8_t DataEX_call(void) | |
| 275 { | |
| 208 | 276 static uint32_t RTEOfflineCnt = 0; |
| 277 static uint8_t SusppressCom = 0; | |
| 278 | |
| 38 | 279 uint8_t SPI_DMA_answer = 0; |
| 141 | 280 |
| 208 | 281 if(SusppressCom) |
| 38 | 282 { |
| 208 | 283 SusppressCom--; |
| 38 | 284 } |
| 149 | 285 else |
| 286 { | |
|
763
aa6006975e76
increase HAL_Delay to 10ms for cold-start-button reset
heinrichsweikamp
parents:
747
diff
changeset
|
287 if(data_old__lost_connection_to_slave_counter_temp >= 2) /* error reaction is triggered whenever communication could not be reestablished within two cycles */ |
| 208 | 288 { |
| 289 data_old__lost_connection_to_slave_counter_temp = 0; | |
| 290 if(DataEX_check_header_and_footer_shifted()) | |
| 291 { | |
| 292 if(RTEOfflineCnt > 1) /* RTE restarted communication after a longer silent time => restart error handling to recover */ | |
| 293 { | |
| 294 data_old__lost_connection_to_slave_counter_retry = 0; | |
| 295 RTEOfflineCnt = 0; | |
| 296 } | |
| 38 | 297 |
| 208 | 298 /* We received shifted data. Step one. Reset DMA to see if the problem is located at main */ |
| 299 if (data_old__lost_connection_to_slave_counter_retry == 0) | |
| 300 { | |
| 301 HAL_SPI_Abort_IT(&cpu2DmaSpi); | |
| 302 } | |
|
763
aa6006975e76
increase HAL_Delay to 10ms for cold-start-button reset
heinrichsweikamp
parents:
747
diff
changeset
|
303 /* reset of own DMA does not work ==> request reset of slave dma by indicating shifted reception */ |
| 208 | 304 if (data_old__lost_connection_to_slave_counter_retry == 1) |
| 305 { | |
| 306 dataOut.header.checkCode[SPI_HEADER_INDEX_RX_STATE] = SPI_RX_STATE_SHIFTED; | |
| 307 } | |
| 308 | |
| 309 /* stop communication with RTE to trigger RTE timeout reaction */ | |
| 310 if (data_old__lost_connection_to_slave_counter_retry == 2) | |
| 311 { | |
| 312 SusppressCom = 3; | |
| 313 } | |
| 38 | 314 |
| 208 | 315 data_old__lost_connection_to_slave_counter_retry++; |
| 316 } | |
| 317 else | |
| 318 { | |
| 319 RTEOfflineCnt++; /* based on footer status the RTE does not seem to provide data in time */ | |
| 320 dataOut.header.checkCode[SPI_HEADER_INDEX_RX_STATE] = SPI_RX_STATE_OFFLINE; | |
| 321 } | |
| 322 } | |
| 323 #if USE_OLD_SYNC_METHOD | |
| 324 /* one cycle with NotChipSelect true to clear slave spi buffer */ | |
| 325 else | |
| 326 { | |
| 327 HAL_GPIO_WritePin(SMALLCPU_CSB_GPIO_PORT,SMALLCPU_CSB_PIN,GPIO_PIN_RESET); | |
| 328 } | |
| 329 #endif | |
|
133
acc98f5bd8c4
Intoduced transfer abort function for data exchange recovery
Ideenmodellierer
parents:
115
diff
changeset
|
330 |
| 208 | 331 DataEx_call_helper_requests(); |
| 332 | |
| 333 //HAL_GPIO_WritePin(OSCILLOSCOPE2_GPIO_PORT,OSCILLOSCOPE2_PIN,GPIO_PIN_RESET); /* only for testing with Oscilloscope */ | |
| 334 | |
| 335 if(SusppressCom == 0) | |
| 336 { | |
| 337 HAL_GPIO_WritePin(SMALLCPU_CSB_GPIO_PORT,SMALLCPU_CSB_PIN,GPIO_PIN_RESET); | |
| 338 | |
| 339 SPI_DMA_answer = HAL_SPI_TransmitReceive_DMA(&cpu2DmaSpi, (uint8_t *)&dataOut, (uint8_t *)&dataIn, EXCHANGE_BUFFERSIZE); | |
| 340 if(SPI_DMA_answer != HAL_OK) | |
| 341 { | |
| 342 DataEX_Error_Handler(SPI_DMA_answer); | |
| 343 } | |
| 344 } | |
| 345 } | |
| 104 | 346 // HAL_GPIO_WritePin(SMALLCPU_CSB_GPIO_PORT,SMALLCPU_CSB_PIN,GPIO_PIN_SET); |
| 38 | 347 //HAL_Delay(3); |
| 348 //HAL_GPIO_WritePin(OSCILLOSCOPE2_GPIO_PORT,OSCILLOSCOPE2_PIN,GPIO_PIN_SET); /* only for testing with Oscilloscope */ | |
| 349 | |
| 350 return 1; | |
| 351 } | |
| 352 | |
| 82 | 353 |
|
198
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
354 static uint32_t SPI_CALLBACKS; |
| 82 | 355 uint32_t get_num_SPI_CALLBACKS(void){ |
| 356 return SPI_CALLBACKS; | |
| 357 } | |
| 358 | |
| 359 SDataExchangeSlaveToMaster* get_dataInPointer(void){ | |
| 360 return &dataIn; | |
| 361 } | |
| 362 | |
| 363 void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi) | |
| 364 { | |
| 365 if(hspi == &cpu2DmaSpi) | |
| 366 { | |
| 154 | 367 HAL_GPIO_WritePin(SMALLCPU_CSB_GPIO_PORT,SMALLCPU_CSB_PIN,GPIO_PIN_SET); |
| 82 | 368 SPI_CALLBACKS+=1; |
| 369 } | |
| 370 } | |
| 371 | |
| 372 | |
| 38 | 373 void DateEx_copy_to_dataOut(void) |
| 374 { | |
| 375 const SDiveState * pStateReal = stateRealGetPointer(); | |
| 376 SSettings *settings = settingsGetPointer(); | |
| 377 | |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
716
diff
changeset
|
378 uint8_t SensorActive[SENSOR_END]; |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
716
diff
changeset
|
379 uint8_t index = 0; |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
716
diff
changeset
|
380 |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
716
diff
changeset
|
381 |
| 38 | 382 if(get_globalState() == StStop) |
| 383 dataOut.mode = MODE_SHUTDOWN; | |
| 384 else | |
| 385 dataOut.mode = 0; | |
| 386 | |
| 387 dataOut.diveModeInfo = pStateReal->diveSettings.diveMode; // hw 170215 | |
| 388 | |
| 389 memcpy(&dataOut.data.DeviceData, stateDeviceGetPointer(), sizeof(SDevice)); | |
| 390 | |
| 391 dataOut.data.VPMconservatism = pStateReal->diveSettings.vpm_conservatism; | |
| 392 dataOut.data.actualGas = pStateReal->lifeData.actualGas; | |
| 393 dataOut.data.ambient_pressure_mbar_ceiling = (pStateReal->decolistBuehlmann.output_ceiling_meter * 100) + (pStateReal->lifeData.pressure_surface_bar * 1000); | |
| 394 dataOut.data.divetimeToCreateLogbook = settings->divetimeToCreateLogbook; | |
| 395 dataOut.data.timeoutDiveReachedZeroDepth = settings->timeoutDiveReachedZeroDepth; | |
| 396 | |
| 397 dataOut.data.offsetPressureSensor_mbar = settings->offsetPressure_mbar; | |
| 398 dataOut.data.offsetTemperatureSensor_centiDegree = settings->offsetTemperature_centigrad; | |
| 399 | |
| 691 | 400 |
| 796 | 401 memcpy(dataOut.data.externalInterface_SensorMap, settings->ext_sensor_map, EXT_INTERFACE_SENSOR_CNT); |
| 691 | 402 |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
716
diff
changeset
|
403 memset(SensorActive, 0, sizeof(SensorActive)); |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
716
diff
changeset
|
404 for (index = 0; index < EXT_INTERFACE_SENSOR_CNT; index++) |
| 691 | 405 { |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
716
diff
changeset
|
406 switch(settings->ext_sensor_map[index]) |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
716
diff
changeset
|
407 { |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
716
diff
changeset
|
408 case SENSOR_ANALOG: SensorActive[SENSOR_ANALOG] = 1; |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
716
diff
changeset
|
409 break; |
| 796 | 410 case SENSOR_DIGO2M: SensorActive[SENSOR_DIGO2] = 1; |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
716
diff
changeset
|
411 break; |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
716
diff
changeset
|
412 case SENSOR_CO2: SensorActive[SENSOR_CO2] = 1; |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
716
diff
changeset
|
413 break; |
| 920 | 414 #ifdef ENABLE_GNSS_SUPPORT |
| 415 case SENSOR_GNSS: SensorActive[SENSOR_GNSS] = 1; | |
| 416 break; | |
| 417 #endif | |
|
747
df0d43da1614
Added pressure compensation to CO2 detection:
Ideenmodellierer
parents:
734
diff
changeset
|
418 #ifdef ENABLE_SENTINEL_MODE |
|
df0d43da1614
Added pressure compensation to CO2 detection:
Ideenmodellierer
parents:
734
diff
changeset
|
419 case SENSOR_SENTINEL: SensorActive[SENSOR_SENTINEL] = 1; |
|
df0d43da1614
Added pressure compensation to CO2 detection:
Ideenmodellierer
parents:
734
diff
changeset
|
420 break; |
|
df0d43da1614
Added pressure compensation to CO2 detection:
Ideenmodellierer
parents:
734
diff
changeset
|
421 #endif |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
716
diff
changeset
|
422 default: |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
716
diff
changeset
|
423 break; |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
716
diff
changeset
|
424 } |
| 691 | 425 } |
| 426 | |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
716
diff
changeset
|
427 if(SensorActive[SENSOR_ANALOG]) |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
716
diff
changeset
|
428 { |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
716
diff
changeset
|
429 externalInterface_Cmd |= EXT_INTERFACE_ADC_ON | EXT_INTERFACE_33V_ON; |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
716
diff
changeset
|
430 } |
| 920 | 431 if((SensorActive[SENSOR_DIGO2]) || (SensorActive[SENSOR_CO2])|| (SensorActive[SENSOR_GNSS])) |
|
702
6d7c812fc173
Added digital o2 sensor to settings and data exchange:
Ideenmodellierer
parents:
691
diff
changeset
|
432 { |
| 839 | 433 externalInterface_Cmd |= EXT_INTERFACE_33V_ON; |
|
702
6d7c812fc173
Added digital o2 sensor to settings and data exchange:
Ideenmodellierer
parents:
691
diff
changeset
|
434 } |
|
6d7c812fc173
Added digital o2 sensor to settings and data exchange:
Ideenmodellierer
parents:
691
diff
changeset
|
435 |
| 691 | 436 #ifdef ENABLE_SENTINEL_MODE |
|
747
df0d43da1614
Added pressure compensation to CO2 detection:
Ideenmodellierer
parents:
734
diff
changeset
|
437 if(SensorActive[SENSOR_SENTINEL]) |
| 691 | 438 { |
|
842
c3dd461ca3f9
Migrated Sentinel protocol to new UART structure:
Ideenmodellierer
parents:
839
diff
changeset
|
439 externalInterface_Cmd |= EXT_INTERFACE_33V_ON; |
| 691 | 440 externalInterface_Cmd &= (~EXT_INTERFACE_ADC_ON); |
| 441 } | |
| 442 #endif | |
| 443 | |
| 662 | 444 dataOut.data.externalInterface_Cmd = externalInterface_Cmd; |
| 445 externalInterface_Cmd = 0; | |
| 446 | |
| 38 | 447 if((hardwareDataGetPointer()->primarySerial <= 32) || (((hardwareDataGetPointer()->primarySerial == 72) && (hardwareDataGetPointer()->secondarySerial == 15)))) |
| 448 { | |
| 449 dataOut.revisionHardware = 0x00; | |
| 450 dataOut.revisionCRCx0x7A = 0x7A; | |
| 451 } | |
| 452 else | |
| 453 if(hardwareDataGetPointer()->primarySerial < 0xFFFF) | |
| 454 { | |
| 455 dataOut.revisionHardware = hardwareDataGetPointer()->revision8bit; | |
| 456 dataOut.revisionCRCx0x7A = hardwareDataGetPointer()->revision8bit ^ 0x7A; | |
| 457 } | |
| 458 else | |
| 459 { | |
| 460 dataOut.revisionHardware = 0xFF; | |
| 461 dataOut.revisionCRCx0x7A = 0xFF; | |
| 462 } | |
| 463 | |
| 464 if(DataEX_check_header_and_footer_ok() && !told_reset_logik_alles_ok) | |
| 465 { | |
| 466 MX_tell_reset_logik_alles_ok(); | |
| 467 told_reset_logik_alles_ok = 1; | |
| 468 } | |
| 469 | |
| 470 if(DataEX_check_header_and_footer_ok() && (dataIn.power_on_reset == 1)) | |
| 471 { | |
| 472 if(!wasUpdateNotPowerOn) | |
| 473 wasPowerOn = 1; | |
| 474 | |
| 475 settingsHelperButtonSens_keepPercentageValues(settingsGetPointerStandard()->ButtonResponsiveness[3], settings->ButtonResponsiveness); | |
| 476 setButtonResponsiveness(settings->ButtonResponsiveness); | |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
716
diff
changeset
|
477 DataEX_setExtInterface_Cmd(EXT_INTERFACE_COPY_SENSORMAP); |
| 38 | 478 } |
| 479 } | |
| 480 | |
| 481 | |
| 482 void DataEX_copy_to_deco(void) | |
| 483 { | |
| 484 if(decoLock == DECO_CALC_running) | |
| 485 return; | |
| 486 | |
|
899
2225c467f1e9
Added data path and visualization for position data:
Ideenmodellierer
parents:
842
diff
changeset
|
487 if(decoLock == DECO_CALC_init_as_is_start_of_dive) |
|
2225c467f1e9
Added data path and visualization for position data:
Ideenmodellierer
parents:
842
diff
changeset
|
488 { |
| 907 | 489 vpm_table_init(); |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
490 vpm_init(&stateUsedWrite->vpm, stateUsedWrite->diveSettings.vpm_conservatism, 0, 0); |
| 38 | 491 buehlmann_init(); |
| 492 timer_init(); | |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
493 resetEvents(stateUsedWrite); |
|
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
494 stateUsedWrite->diveSettings.internal__pressure_first_stop_ambient_bar_as_upper_limit_for_gf_low_otherwise_zero = 0; |
|
899
2225c467f1e9
Added data path and visualization for position data:
Ideenmodellierer
parents:
842
diff
changeset
|
495 } |
| 38 | 496 |
|
899
2225c467f1e9
Added data path and visualization for position data:
Ideenmodellierer
parents:
842
diff
changeset
|
497 if(decoLock == DECO_CALC_FINSHED_Buehlmann) |
| 38 | 498 { |
| 499 | |
| 500 } | |
| 501 switch(decoLock) | |
| 502 { | |
| 503 | |
| 504 //Deco_calculation finished | |
| 505 case DECO_CALC_FINSHED_vpm: | |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
506 memcpy(&stateUsedWrite->decolistVPM,&stateDeco.decolistVPM,sizeof(SDecoinfo)); |
|
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
507 stateUsedWrite->decolistVPM.tickstamp = HAL_GetTick(); |
|
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
508 stateUsedWrite->vpm.deco_zone_reached = stateDeco.vpm.deco_zone_reached; |
| 38 | 509 for(int i = 0; i< 16; i++) |
| 510 { | |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
511 stateUsedWrite->vpm.adjusted_critical_radius_he[i] = stateDeco.vpm.adjusted_critical_radius_he[i]; |
|
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
512 stateUsedWrite->vpm.adjusted_critical_radius_n2[i] = stateDeco.vpm.adjusted_critical_radius_n2[i]; |
|
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
513 stateUsedWrite->vpm.adjusted_crushing_pressure_he[i] = stateDeco.vpm.adjusted_crushing_pressure_he[i]; |
|
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
514 stateUsedWrite->vpm.adjusted_crushing_pressure_n2[i] = stateDeco.vpm.adjusted_crushing_pressure_n2[i]; |
|
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
515 stateUsedWrite->vpm.initial_allowable_gradient_he[i] = stateDeco.vpm.initial_allowable_gradient_he[i]; |
|
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
516 stateUsedWrite->vpm.initial_allowable_gradient_n2[i] = stateDeco.vpm.initial_allowable_gradient_n2[i]; |
|
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
517 stateUsedWrite->vpm.max_actual_gradient[i] = stateDeco.vpm.max_actual_gradient[i]; |
| 38 | 518 } |
| 519 break; | |
| 520 case DECO_CALC_FINSHED_Buehlmann: | |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
521 memcpy(&stateUsedWrite->decolistBuehlmann,&stateDeco.decolistBuehlmann,sizeof(SDecoinfo)); |
|
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
522 stateUsedWrite->decolistBuehlmann.tickstamp = HAL_GetTick(); |
| 38 | 523 //Copy Data to be stored if regular Buehlmann, not FutureBuehlmann |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
524 stateUsedWrite->diveSettings.internal__pressure_first_stop_ambient_bar_as_upper_limit_for_gf_low_otherwise_zero = stateDeco.diveSettings.internal__pressure_first_stop_ambient_bar_as_upper_limit_for_gf_low_otherwise_zero; |
| 38 | 525 break; |
| 526 case DECO_CALC_FINSHED_FutureBuehlmann: | |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
527 memcpy(&stateUsedWrite->decolistFutureBuehlmann,&stateDeco.decolistFutureBuehlmann,sizeof(SDecoinfo)); |
|
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
528 stateUsedWrite->decolistFutureBuehlmann.tickstamp = HAL_GetTick(); |
| 38 | 529 break; |
| 530 case DECO_CALC_FINSHED_Futurevpm: | |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
531 memcpy(&stateUsedWrite->decolistFutureVPM,&stateDeco.decolistFutureVPM,sizeof(SDecoinfo)); |
|
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
532 stateUsedWrite->decolistFutureVPM.tickstamp = HAL_GetTick(); |
| 38 | 533 break; |
| 534 } | |
| 535 | |
| 536 //Copy Inputdata from stateReal to stateDeco | |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
537 memcpy(&stateDeco.lifeData,&stateUsedWrite->lifeData,sizeof(SLifeData)); |
|
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
538 memcpy(&stateDeco.diveSettings,&stateUsedWrite->diveSettings,sizeof(SDiveSettings)); |
|
899
2225c467f1e9
Added data path and visualization for position data:
Ideenmodellierer
parents:
842
diff
changeset
|
539 memcpy(&stateDeco.decolistVPM,&stateUsedWrite->decolistVPM,sizeof(SDecoinfo)); |
| 38 | 540 |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
541 stateDeco.vpm.deco_zone_reached = stateUsedWrite->vpm.deco_zone_reached; |
| 38 | 542 // memcpy(&stateDeco.vpm,&pStateUsed->vpm,sizeof(SVpm)); |
| 543 for(int i = 0; i< 16; i++) | |
| 544 { | |
|
288
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
545 stateDeco.vpm.max_crushing_pressure_he[i] = stateUsedWrite->vpm.max_crushing_pressure_he[i]; |
|
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
546 stateDeco.vpm.max_crushing_pressure_n2[i] = stateUsedWrite->vpm.max_crushing_pressure_n2[i]; |
|
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
547 stateDeco.vpm.adjusted_critical_radius_he[i] = stateUsedWrite->vpm.adjusted_critical_radius_he[i]; |
|
ba229a012ac7
cleanup: no useless checks for simulator state
Jan Mulder <jlmulder@xs4all.nl>
parents:
278
diff
changeset
|
548 stateDeco.vpm.adjusted_critical_radius_n2[i] = stateUsedWrite->vpm.adjusted_critical_radius_n2[i]; |
| 38 | 549 } |
|
899
2225c467f1e9
Added data path and visualization for position data:
Ideenmodellierer
parents:
842
diff
changeset
|
550 decoLock = DECO_CALC_ready; |
| 38 | 551 } |
| 552 | |
| 553 | |
|
198
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
554 static void DataEX_helper_copy_deviceData(SDeviceLine *lineWrite, const SDeviceLine *lineRead) |
| 38 | 555 { |
| 556 lineWrite->date_rtc_dr = lineRead->date_rtc_dr; | |
| 557 lineWrite->time_rtc_tr = lineRead->time_rtc_tr; | |
| 558 lineWrite->value_int32 = lineRead->value_int32; | |
| 559 } | |
| 560 | |
|
198
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
561 static void DataEX_helper_SetTime(RTC_TimeTypeDef inStimestructure, uint32_t *outTimetmpreg) |
| 38 | 562 { |
| 563 inStimestructure.TimeFormat = RTC_HOURFORMAT_24; | |
| 564 | |
| 565 *outTimetmpreg = (uint32_t)(((uint32_t)RTC_ByteToBcd2(inStimestructure.Hours) << 16U) | \ | |
| 566 ((uint32_t)RTC_ByteToBcd2(inStimestructure.Minutes) << 8U) | \ | |
| 567 ((uint32_t)RTC_ByteToBcd2(inStimestructure.Seconds)) | \ | |
| 568 (((uint32_t)inStimestructure.TimeFormat) << 16U)); | |
| 569 } | |
| 570 | |
| 571 | |
|
198
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
572 static void DataEX_helper_SetDate(RTC_DateTypeDef inSdatestructure, uint32_t *outDatetmpreg) |
| 38 | 573 { |
| 574 *outDatetmpreg = (((uint32_t)RTC_ByteToBcd2(inSdatestructure.Year) << 16U) | \ | |
| 575 ((uint32_t)RTC_ByteToBcd2(inSdatestructure.Month) << 8U) | \ | |
| 576 ((uint32_t)RTC_ByteToBcd2(inSdatestructure.Date)) | \ | |
| 577 ((uint32_t)inSdatestructure.WeekDay << 13U)); | |
| 578 } | |
| 579 | |
| 580 | |
|
198
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
581 static void DataEX_helper_set_Unknown_Date_deviceData(SDeviceLine *lineWrite) |
| 38 | 582 { |
| 583 RTC_DateTypeDef sdatestructure; | |
| 584 RTC_TimeTypeDef stimestructure; | |
| 585 | |
|
406
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
586 stimestructure.Hours = UNKNOWN_TIME_HOURS; |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
587 stimestructure.Minutes = UNKNOWN_TIME_MINUTES; |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
588 stimestructure.Seconds = UNKNOWN_TIME_SECOND; |
| 38 | 589 |
|
406
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
590 sdatestructure.Date = UNKNOWN_DATE_DAY; |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
591 sdatestructure.Month = UNKNOWN_DATE_MONTH; |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
592 sdatestructure.Year = UNKNOWN_DATE_YEAR; |
| 38 | 593 setWeekday(&sdatestructure); |
| 594 | |
| 595 DataEX_helper_SetTime(stimestructure, &lineWrite->time_rtc_tr); | |
| 596 DataEX_helper_SetDate(sdatestructure, &lineWrite->date_rtc_dr); | |
| 597 } | |
| 598 | |
| 599 | |
|
198
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
600 static uint8_t DataEX_helper_Check_And_Correct_Date_deviceData(SDeviceLine *lineWrite) |
| 38 | 601 { |
|
406
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
602 uint8_t retval = 0; |
| 38 | 603 RTC_DateTypeDef sdatestructure; |
| 604 RTC_TimeTypeDef stimestructure; | |
| 605 | |
| 606 // from lineWrite to structure | |
| 607 translateDate(lineWrite->date_rtc_dr, &sdatestructure); | |
| 608 translateTime(lineWrite->time_rtc_tr, &stimestructure); | |
|
406
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
609 |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
610 /* Check if date is out of range */ |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
611 if(!( (sdatestructure.Year >= 15) |
| 38 | 612 && (sdatestructure.Year <= 30) |
|
406
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
613 && (sdatestructure.Month <= 12))) |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
614 { |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
615 DataEX_helper_set_Unknown_Date_deviceData(lineWrite); |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
616 retval = 1; |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
617 } |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
618 return retval; |
| 38 | 619 } |
| 620 | |
| 621 | |
|
406
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
622 static uint8_t DataEX_helper_Check_And_Correct_Value_deviceData(SDeviceLine *lineWrite, int32_t from, int32_t to, uint8_t defaulttofrom) |
| 38 | 623 { |
|
406
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
624 uint8_t retval = 0; |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
625 RTC_DateTypeDef sdatestructure; |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
626 |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
627 /* Is value out of valid range? */ |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
628 if(!(lineWrite->value_int32 >= from && lineWrite->value_int32 <= to)) |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
629 { |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
630 if(defaulttofrom) |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
631 { |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
632 lineWrite->value_int32 = from; |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
633 } |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
634 else |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
635 { |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
636 lineWrite->value_int32 = to; |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
637 } |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
638 DataEX_helper_set_Unknown_Date_deviceData(lineWrite); |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
639 } |
| 38 | 640 |
|
406
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
641 /* This is just a repair function to restore metric if a corruption occurred in an older fw version */ |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
642 if(((lineWrite->value_int32 == to) && defaulttofrom ) |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
643 || ((lineWrite->value_int32 == from) && !defaulttofrom )) |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
644 { |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
645 translateDate(lineWrite->date_rtc_dr, &sdatestructure); |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
646 if(sdatestructure.Year == UNKNOWN_DATE_YEAR) |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
647 { |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
648 if(defaulttofrom) |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
649 { |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
650 lineWrite->value_int32 = from; |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
651 } |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
652 else |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
653 { |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
654 lineWrite->value_int32 = to; |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
655 } |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
656 } |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
657 } |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
658 return retval; |
| 38 | 659 } |
| 660 | |
| 661 | |
|
198
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
662 static void DataEX_check_DeviceData(void) |
| 38 | 663 { |
| 664 SDevice *DeviceData = stateDeviceGetPointerWrite(); | |
| 665 | |
| 666 DataEX_helper_Check_And_Correct_Date_deviceData(&DeviceData->batteryChargeCompleteCycles); | |
| 667 DataEX_helper_Check_And_Correct_Date_deviceData(&DeviceData->batteryChargeCycles); | |
| 668 DataEX_helper_Check_And_Correct_Date_deviceData(&DeviceData->depthMaximum); | |
| 669 DataEX_helper_Check_And_Correct_Date_deviceData(&DeviceData->diveCycles); | |
| 670 DataEX_helper_Check_And_Correct_Date_deviceData(&DeviceData->hoursOfOperation); | |
| 671 DataEX_helper_Check_And_Correct_Date_deviceData(&DeviceData->temperatureMaximum); | |
| 672 DataEX_helper_Check_And_Correct_Date_deviceData(&DeviceData->temperatureMinimum); | |
| 673 DataEX_helper_Check_And_Correct_Date_deviceData(&DeviceData->voltageMinimum); | |
| 674 | |
|
406
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
675 DataEX_helper_Check_And_Correct_Value_deviceData(&DeviceData->batteryChargeCompleteCycles, 0, 10000,1); |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
676 DataEX_helper_Check_And_Correct_Value_deviceData(&DeviceData->batteryChargeCycles, 0, 20000,1); |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
677 DataEX_helper_Check_And_Correct_Value_deviceData(&DeviceData->depthMaximum, 0, (500*100)+1000,1); |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
678 DataEX_helper_Check_And_Correct_Value_deviceData(&DeviceData->diveCycles, 0, 20000,1); |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
679 DataEX_helper_Check_And_Correct_Value_deviceData(&DeviceData->hoursOfOperation, 0, 1000000,1); |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
680 DataEX_helper_Check_And_Correct_Value_deviceData(&DeviceData->temperatureMaximum, -30*100, 150*100,1); |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
681 DataEX_helper_Check_And_Correct_Value_deviceData(&DeviceData->temperatureMinimum, -30*100, 150*100,0); |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
682 DataEX_helper_Check_And_Correct_Value_deviceData(&DeviceData->voltageMinimum, 2*1000, 6*1000,0); |
| 38 | 683 } |
| 684 | |
| 685 | |
|
198
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
686 static void DataEX_merge_DeviceData_and_store(void) |
| 38 | 687 { |
| 688 uint16_t dataLengthRead; | |
| 689 SDevice DeviceDataFlash; | |
| 690 SDevice *DeviceData = stateDeviceGetPointerWrite(); | |
| 691 | |
| 692 dataLengthRead = ext_flash_read_devicedata((uint8_t *)&DeviceDataFlash,sizeof(SDevice)); | |
| 693 | |
| 694 if(dataLengthRead == 0) | |
| 695 { | |
|
421
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
407
diff
changeset
|
696 ext_flash_write_devicedata(false); |
| 38 | 697 return; |
| 698 } | |
| 699 | |
| 700 /* max values */ | |
| 701 if(DeviceData->batteryChargeCompleteCycles.value_int32 < DeviceDataFlash.batteryChargeCompleteCycles.value_int32) | |
| 702 { | |
| 703 DataEX_helper_copy_deviceData(&DeviceData->batteryChargeCompleteCycles, &DeviceDataFlash.batteryChargeCompleteCycles); | |
| 704 } | |
| 705 if(DeviceData->batteryChargeCycles.value_int32 < DeviceDataFlash.batteryChargeCycles.value_int32) | |
| 706 { | |
| 707 DataEX_helper_copy_deviceData(&DeviceData->batteryChargeCycles, &DeviceDataFlash.batteryChargeCycles); | |
| 708 } | |
| 709 if(DeviceData->temperatureMaximum.value_int32 < DeviceDataFlash.temperatureMaximum.value_int32) | |
| 710 { | |
| 711 DataEX_helper_copy_deviceData(&DeviceData->temperatureMaximum, &DeviceDataFlash.temperatureMaximum); | |
| 712 } | |
| 713 if(DeviceData->depthMaximum.value_int32 < DeviceDataFlash.depthMaximum.value_int32) | |
| 714 { | |
| 715 DataEX_helper_copy_deviceData(&DeviceData->depthMaximum, &DeviceDataFlash.depthMaximum); | |
| 716 } | |
| 717 if(DeviceData->diveCycles.value_int32 < DeviceDataFlash.diveCycles.value_int32) | |
| 718 { | |
| 719 DataEX_helper_copy_deviceData(&DeviceData->diveCycles, &DeviceDataFlash.diveCycles); | |
| 720 } | |
|
406
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
721 if(DeviceData->hoursOfOperation.value_int32 < DeviceDataFlash.hoursOfOperation.value_int32) |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
722 { |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
723 DataEX_helper_copy_deviceData(&DeviceData->hoursOfOperation, &DeviceDataFlash.hoursOfOperation); |
|
439874690f85
Bugfix Min max values for device data checks:
ideenmodellierer
parents:
342
diff
changeset
|
724 } |
| 38 | 725 |
|
407
b11e50415982
Bugfix parallel call of external flash functions:
ideenmodellierer
parents:
406
diff
changeset
|
726 |
| 38 | 727 /* min values */ |
| 728 if(DeviceData->temperatureMinimum.value_int32 > DeviceDataFlash.temperatureMinimum.value_int32) | |
| 729 { | |
| 730 DataEX_helper_copy_deviceData(&DeviceData->temperatureMinimum, &DeviceDataFlash.temperatureMinimum); | |
| 731 } | |
| 732 if(DeviceData->voltageMinimum.value_int32 > DeviceDataFlash.voltageMinimum.value_int32) | |
| 733 { | |
| 734 DataEX_helper_copy_deviceData(&DeviceData->voltageMinimum, &DeviceDataFlash.voltageMinimum); | |
| 735 } | |
| 736 | |
| 737 DataEX_check_DeviceData (); | |
|
421
3f7d80f37bfc
Enable sequentionel writing of device data:
ideenmodellierer
parents:
407
diff
changeset
|
738 ext_flash_write_devicedata(false); |
| 38 | 739 } |
| 740 | |
| 741 | |
|
198
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
742 static void DataEX_copy_to_DeviceData(void) |
| 38 | 743 { |
| 744 SDataExchangeSlaveToMasterDeviceData * dataInDevice = (SDataExchangeSlaveToMasterDeviceData *)&dataIn; | |
| 745 SDevice * pDeviceState = stateDeviceGetPointerWrite(); | |
| 746 | |
| 747 memcpy(pDeviceState, &dataInDevice->DeviceData[dataInDevice->boolDeviceData], sizeof(SDevice)); | |
| 559 | 748 memcpy(&hw_Info, &dataInDevice->hw_Info, sizeof(dataInDevice->hw_Info)); |
| 749 | |
|
407
b11e50415982
Bugfix parallel call of external flash functions:
ideenmodellierer
parents:
406
diff
changeset
|
750 DeviceDataUpdated = 1; /* indicate new data to be written to flash by background task (at last op hour count will be updated) */ |
| 38 | 751 } |
| 752 | |
| 753 | |
|
198
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
754 static void DataEX_copy_to_VpmRepetitiveData(void) |
| 38 | 755 { |
| 756 SDataExchangeSlaveToMasterDeviceData * dataInDevice = (SDataExchangeSlaveToMasterDeviceData *)&dataIn; | |
| 757 SVpmRepetitiveData * pVpmState = stateVpmRepetitiveDataGetPointerWrite(); | |
| 758 | |
| 759 if(dataInDevice->boolVpmRepetitiveDataValid) | |
| 760 { | |
| 761 memcpy(pVpmState, &dataInDevice->VpmRepetitiveData, sizeof(SVpmRepetitiveData)); | |
| 762 pVpmState->is_data_from_RTE_CPU = 1; | |
| 763 } | |
| 764 } | |
| 765 | |
| 766 | |
| 767 void DataEX_control_connection_while_asking_for_sleep(void) | |
| 768 { | |
| 769 if(!DataEX_check_header_and_footer_ok()) | |
| 770 { | |
| 771 if(DataEX_check_header_and_footer_devicedata()) | |
| 772 { | |
| 773 data_old__lost_connection_to_slave_counter_retry = 0; | |
| 774 data_old__lost_connection_to_slave_counter_temp = 0; | |
| 775 stateRealGetPointerWrite()->data_old__lost_connection_to_slave = 0; | |
| 208 | 776 dataOut.header.checkCode[SPI_HEADER_INDEX_RX_STATE] = SPI_RX_STATE_OK; |
| 38 | 777 } |
| 778 else | |
| 779 { | |
| 780 stateRealGetPointerWrite()->data_old__lost_connection_to_slave = 1; | |
| 781 data_old__lost_connection_to_slave_counter_temp += 1; | |
| 782 data_old__lost_connection_to_slave_counter_total += 1; | |
| 783 } | |
| 784 } | |
| 785 } | |
| 786 | |
|
173
05c770dc2911
Bugfix: make max depth move with current depth (part 1)
Jan Mulder <jlmulder@xs4all.nl>
parents:
156
diff
changeset
|
787 static float getSampleDepth(SDataExchangeSlaveToMaster *d, SDiveState *ds) |
|
05c770dc2911
Bugfix: make max depth move with current depth (part 1)
Jan Mulder <jlmulder@xs4all.nl>
parents:
156
diff
changeset
|
788 { |
|
342
ea3fda8eb93e
Removed averaging of pressure and temperatur values
ideenmodellierer
parents:
309
diff
changeset
|
789 float ambient = 0; |
|
ea3fda8eb93e
Removed averaging of pressure and temperatur values
ideenmodellierer
parents:
309
diff
changeset
|
790 float surface = 0; |
|
ea3fda8eb93e
Removed averaging of pressure and temperatur values
ideenmodellierer
parents:
309
diff
changeset
|
791 float depth = 0; |
|
ea3fda8eb93e
Removed averaging of pressure and temperatur values
ideenmodellierer
parents:
309
diff
changeset
|
792 float density = 0; |
|
173
05c770dc2911
Bugfix: make max depth move with current depth (part 1)
Jan Mulder <jlmulder@xs4all.nl>
parents:
156
diff
changeset
|
793 |
|
342
ea3fda8eb93e
Removed averaging of pressure and temperatur values
ideenmodellierer
parents:
309
diff
changeset
|
794 ambient = d->data[d->boolPressureData].pressure_mbar / 1000.0f; |
|
ea3fda8eb93e
Removed averaging of pressure and temperatur values
ideenmodellierer
parents:
309
diff
changeset
|
795 surface = d->data[d->boolPressureData].surface_mbar / 1000.0f; |
|
ea3fda8eb93e
Removed averaging of pressure and temperatur values
ideenmodellierer
parents:
309
diff
changeset
|
796 density = ((float)( 100 + settingsGetPointer()->salinity)) / 100.0f; |
|
173
05c770dc2911
Bugfix: make max depth move with current depth (part 1)
Jan Mulder <jlmulder@xs4all.nl>
parents:
156
diff
changeset
|
797 |
|
497
5757edda56b7
Added worst case plausibility check (disabled by compile switch)
Ideenmodellierer
parents:
451
diff
changeset
|
798 #ifdef TESTBENCH |
|
5757edda56b7
Added worst case plausibility check (disabled by compile switch)
Ideenmodellierer
parents:
451
diff
changeset
|
799 /* do plausibility check (typically only needed at debug hardware) */ |
|
5757edda56b7
Added worst case plausibility check (disabled by compile switch)
Ideenmodellierer
parents:
451
diff
changeset
|
800 if(ambient < 0) |
|
5757edda56b7
Added worst case plausibility check (disabled by compile switch)
Ideenmodellierer
parents:
451
diff
changeset
|
801 { |
|
5757edda56b7
Added worst case plausibility check (disabled by compile switch)
Ideenmodellierer
parents:
451
diff
changeset
|
802 ambient = 1.0; |
|
5757edda56b7
Added worst case plausibility check (disabled by compile switch)
Ideenmodellierer
parents:
451
diff
changeset
|
803 } |
|
5757edda56b7
Added worst case plausibility check (disabled by compile switch)
Ideenmodellierer
parents:
451
diff
changeset
|
804 if(surface < 0) |
|
5757edda56b7
Added worst case plausibility check (disabled by compile switch)
Ideenmodellierer
parents:
451
diff
changeset
|
805 { |
|
5757edda56b7
Added worst case plausibility check (disabled by compile switch)
Ideenmodellierer
parents:
451
diff
changeset
|
806 surface = 1.0; |
|
5757edda56b7
Added worst case plausibility check (disabled by compile switch)
Ideenmodellierer
parents:
451
diff
changeset
|
807 } |
|
5757edda56b7
Added worst case plausibility check (disabled by compile switch)
Ideenmodellierer
parents:
451
diff
changeset
|
808 #endif |
|
342
ea3fda8eb93e
Removed averaging of pressure and temperatur values
ideenmodellierer
parents:
309
diff
changeset
|
809 ds->lifeData.pressure_ambient_bar = ambient; |
|
ea3fda8eb93e
Removed averaging of pressure and temperatur values
ideenmodellierer
parents:
309
diff
changeset
|
810 ds->lifeData.pressure_surface_bar = surface; |
|
ea3fda8eb93e
Removed averaging of pressure and temperatur values
ideenmodellierer
parents:
309
diff
changeset
|
811 depth = (ambient - surface) / (0.09807f * density); |
|
ea3fda8eb93e
Removed averaging of pressure and temperatur values
ideenmodellierer
parents:
309
diff
changeset
|
812 ds->lifeData.bool_temp1 = d->data[d->boolPressureData].SPARE1; |
|
173
05c770dc2911
Bugfix: make max depth move with current depth (part 1)
Jan Mulder <jlmulder@xs4all.nl>
parents:
156
diff
changeset
|
813 |
|
342
ea3fda8eb93e
Removed averaging of pressure and temperatur values
ideenmodellierer
parents:
309
diff
changeset
|
814 return depth; |
|
173
05c770dc2911
Bugfix: make max depth move with current depth (part 1)
Jan Mulder <jlmulder@xs4all.nl>
parents:
156
diff
changeset
|
815 } |
| 38 | 816 |
|
189
8b8074080d7b
Bugfix: average temperature on arrival from RTE instead of display time
Jan Mulder <jlmulder@xs4all.nl>
parents:
173
diff
changeset
|
817 static float getTemperature(SDataExchangeSlaveToMaster *d) |
|
8b8074080d7b
Bugfix: average temperature on arrival from RTE instead of display time
Jan Mulder <jlmulder@xs4all.nl>
parents:
173
diff
changeset
|
818 { |
|
342
ea3fda8eb93e
Removed averaging of pressure and temperatur values
ideenmodellierer
parents:
309
diff
changeset
|
819 float temp = 0; |
|
ea3fda8eb93e
Removed averaging of pressure and temperatur values
ideenmodellierer
parents:
309
diff
changeset
|
820 temp = d->data[d->boolPressureData].temperature; |
|
189
8b8074080d7b
Bugfix: average temperature on arrival from RTE instead of display time
Jan Mulder <jlmulder@xs4all.nl>
parents:
173
diff
changeset
|
821 |
|
497
5757edda56b7
Added worst case plausibility check (disabled by compile switch)
Ideenmodellierer
parents:
451
diff
changeset
|
822 #ifdef TESTBENCH |
|
5757edda56b7
Added worst case plausibility check (disabled by compile switch)
Ideenmodellierer
parents:
451
diff
changeset
|
823 /* do plausibility check (typically only needed at debug hardware */ |
|
5757edda56b7
Added worst case plausibility check (disabled by compile switch)
Ideenmodellierer
parents:
451
diff
changeset
|
824 if(temp < -40.0) |
|
5757edda56b7
Added worst case plausibility check (disabled by compile switch)
Ideenmodellierer
parents:
451
diff
changeset
|
825 { |
|
5757edda56b7
Added worst case plausibility check (disabled by compile switch)
Ideenmodellierer
parents:
451
diff
changeset
|
826 temp = 20.0; |
|
5757edda56b7
Added worst case plausibility check (disabled by compile switch)
Ideenmodellierer
parents:
451
diff
changeset
|
827 } |
|
5757edda56b7
Added worst case plausibility check (disabled by compile switch)
Ideenmodellierer
parents:
451
diff
changeset
|
828 #endif |
|
342
ea3fda8eb93e
Removed averaging of pressure and temperatur values
ideenmodellierer
parents:
309
diff
changeset
|
829 return temp; |
|
189
8b8074080d7b
Bugfix: average temperature on arrival from RTE instead of display time
Jan Mulder <jlmulder@xs4all.nl>
parents:
173
diff
changeset
|
830 } |
|
8b8074080d7b
Bugfix: average temperature on arrival from RTE instead of display time
Jan Mulder <jlmulder@xs4all.nl>
parents:
173
diff
changeset
|
831 |
| 38 | 832 void DataEX_copy_to_LifeData(_Bool *modeChangeFlag) |
| 833 { | |
| 662 | 834 static uint16_t getDeviceDataAfterStartOfMainCPU = 20; |
| 835 | |
|
173
05c770dc2911
Bugfix: make max depth move with current depth (part 1)
Jan Mulder <jlmulder@xs4all.nl>
parents:
156
diff
changeset
|
836 SDiveState *pStateReal = stateRealGetPointerWrite(); |
|
577
9bb9a52d6ae5
Handle o2 voltage values < 0.5mV as invalid:
Ideenmodellierer
parents:
559
diff
changeset
|
837 uint8_t idx; |
| 662 | 838 float meter = 0; |
| 839 SSettings *pSettings; | |
|
747
df0d43da1614
Added pressure compensation to CO2 detection:
Ideenmodellierer
parents:
734
diff
changeset
|
840 |
|
df0d43da1614
Added pressure compensation to CO2 detection:
Ideenmodellierer
parents:
734
diff
changeset
|
841 #ifdef ENABLE_EXTERNAL_PRESSURE |
|
df0d43da1614
Added pressure compensation to CO2 detection:
Ideenmodellierer
parents:
734
diff
changeset
|
842 float CO2Corr = 0.0; |
|
df0d43da1614
Added pressure compensation to CO2 detection:
Ideenmodellierer
parents:
734
diff
changeset
|
843 #endif |
| 662 | 844 |
| 38 | 845 // wireless - �ltere daten aufr�umen |
|
446
f1257a32f2d4
Introduced configuration header for variant managment:
ideenmodellierer
parents:
436
diff
changeset
|
846 #if 0 |
|
51
8f8ea3a32e82
Resolved warnings pointing to possible invalid memory access
Ideenmodellierer
parents:
38
diff
changeset
|
847 for(int i=0;i<(2*NUM_GASES+1);i++) |
| 38 | 848 { |
| 849 if(pStateReal->lifeData.bottle_bar[i]) | |
| 850 { | |
| 851 if((pStateReal->lifeData.bottle_bar_age_MilliSeconds[i] == 0) || (pStateReal->lifeData.bottle_bar_age_MilliSeconds[i] > 60000)) | |
| 852 { | |
| 853 pStateReal->lifeData.bottle_bar_age_MilliSeconds[i] = 0; | |
| 854 pStateReal->lifeData.bottle_bar[i] = 0; | |
| 855 } | |
| 856 else | |
| 857 pStateReal->lifeData.bottle_bar_age_MilliSeconds[i] += 100; | |
| 858 } | |
| 859 } | |
|
446
f1257a32f2d4
Introduced configuration header for variant managment:
ideenmodellierer
parents:
436
diff
changeset
|
860 #else |
|
451
c2e02b87774f
Allocate received bar value to active gas (was static allocated to gas[1])
ideenmodellierer
parents:
446
diff
changeset
|
861 if(stateRealGetPointer()->lifeData.bottle_bar_age_MilliSeconds[stateRealGetPointer()->lifeData.actualGas.GasIdInSettings] < 6000) /* max age after ten minutes */ |
|
446
f1257a32f2d4
Introduced configuration header for variant managment:
ideenmodellierer
parents:
436
diff
changeset
|
862 { |
|
451
c2e02b87774f
Allocate received bar value to active gas (was static allocated to gas[1])
ideenmodellierer
parents:
446
diff
changeset
|
863 stateRealGetPointerWrite()->lifeData.bottle_bar_age_MilliSeconds[stateRealGetPointer()->lifeData.actualGas.GasIdInSettings]++; |
|
446
f1257a32f2d4
Introduced configuration header for variant managment:
ideenmodellierer
parents:
436
diff
changeset
|
864 } |
|
f1257a32f2d4
Introduced configuration header for variant managment:
ideenmodellierer
parents:
436
diff
changeset
|
865 #endif |
| 38 | 866 if(!DataEX_check_header_and_footer_ok()) |
| 867 { | |
| 868 if(DataEX_check_header_and_footer_devicedata()) | |
| 869 { | |
| 870 DataEX_copy_to_DeviceData(); | |
| 871 DataEX_copy_to_VpmRepetitiveData(); | |
| 872 data_old__lost_connection_to_slave_counter_temp = 0; | |
| 873 data_old__lost_connection_to_slave_counter_retry = 0; | |
|
275
189387bf23a8
Do not mark data as valid if devicedata is received.
ideenmodellierer
parents:
232
diff
changeset
|
874 /* Do not yet reset state. Wait till common data has been received in next cycle. Otherwise invalid data may be forwarded for processing */ |
|
189387bf23a8
Do not mark data as valid if devicedata is received.
ideenmodellierer
parents:
232
diff
changeset
|
875 /* pStateReal->data_old__lost_connection_to_slave = 0; */ |
| 208 | 876 dataOut.header.checkCode[SPI_HEADER_INDEX_RX_STATE] = SPI_RX_STATE_OK; |
| 38 | 877 } |
| 878 else | |
| 879 { | |
| 880 pStateReal->data_old__lost_connection_to_slave = 1; | |
| 881 data_old__lost_connection_to_slave_counter_temp += 1; | |
| 882 data_old__lost_connection_to_slave_counter_total += 1; | |
| 883 } | |
| 884 return; | |
| 885 } | |
| 141 | 886 else /* RX data OK */ |
| 887 { | |
| 888 data_old__lost_connection_to_slave_counter_temp = 0; | |
| 889 data_old__lost_connection_to_slave_counter_retry = 0; | |
| 890 pStateReal->data_old__lost_connection_to_slave = 0; | |
| 208 | 891 dataOut.header.checkCode[SPI_HEADER_INDEX_RX_STATE] = SPI_RX_STATE_OK; |
| 141 | 892 } |
| 38 | 893 |
| 894 if(getDeviceDataAfterStartOfMainCPU) | |
| 895 { | |
| 896 getDeviceDataAfterStartOfMainCPU--; | |
| 897 if(getDeviceDataAfterStartOfMainCPU == 0) | |
| 898 { | |
| 899 dataOut.getDeviceDataNow = 1; | |
| 141 | 900 getDeviceDataAfterStartOfMainCPU = 10*60*10; /* * 100ms = 60 second => update device data every 10 minutes */ |
| 38 | 901 } |
| 902 } | |
| 903 | |
| 662 | 904 if((requestNecessary.uw != 0) && (dataIn.confirmRequest.uw != 0)) |
| 38 | 905 { |
| 906 if(((dataIn.confirmRequest.uw) & CRBUTTON) != 0) | |
| 907 { | |
| 908 requestNecessary.ub.button = 0; | |
| 909 } | |
| 662 | 910 if(((dataIn.confirmRequest.uw) & CRCLEARDECO) != 0) |
| 911 { | |
| 912 requestNecessary.ub.clearDeco = 0; | |
| 913 } | |
| 914 if(((dataIn.confirmRequest.uw) & CRDATE) != 0) | |
| 915 { | |
| 916 requestNecessary.ub.date = 0; | |
| 917 } | |
| 918 if(((dataIn.confirmRequest.uw) & CRTIME) != 0) | |
| 919 { | |
| 920 requestNecessary.ub.time = 0; | |
| 921 } | |
| 922 if(((dataIn.confirmRequest.uw) & CRCOMPASS) != 0) | |
| 923 { | |
| 924 requestNecessary.ub.compass = 0; | |
| 925 } | |
| 926 if(((dataIn.confirmRequest.uw) & CRDEVICEDATA) != 0) | |
| 927 { | |
| 928 requestNecessary.ub.devicedata = 0; | |
| 929 } | |
| 930 if(((dataIn.confirmRequest.uw) & CRBATTERY) != 0) | |
| 931 { | |
| 932 requestNecessary.ub.batterygauge = 0; | |
| 933 } | |
| 934 if(((dataIn.confirmRequest.uw) & CRACCIDENT) != 0) | |
| 935 { | |
| 936 requestNecessary.ub.accident = 0; | |
| 937 } | |
| 38 | 938 |
| 662 | 939 if(requestNecessary.ub.button == 1) /* send button values to RTE */ |
| 38 | 940 { |
| 941 setButtonResponsiveness(settingsGetPointer()->ButtonResponsiveness); | |
| 942 } | |
| 943 } | |
| 149 | 944 |
| 38 | 945 /* uint8_t IAmStolenPleaseKillMe; |
| 946 */ | |
|
51
8f8ea3a32e82
Resolved warnings pointing to possible invalid memory access
Ideenmodellierer
parents:
38
diff
changeset
|
947 pSettings = settingsGetPointer(); |
|
8f8ea3a32e82
Resolved warnings pointing to possible invalid memory access
Ideenmodellierer
parents:
38
diff
changeset
|
948 |
|
8f8ea3a32e82
Resolved warnings pointing to possible invalid memory access
Ideenmodellierer
parents:
38
diff
changeset
|
949 if(pSettings->IAmStolenPleaseKillMe > 3) |
| 38 | 950 { |
| 951 pSettings->salinity = 0; | |
| 952 dataIn.data[dataIn.boolPressureData].surface_mbar = 999; | |
| 953 dataIn.data[dataIn.boolPressureData].pressure_mbar = 98971; | |
| 954 dataIn.mode = MODE_DIVE; | |
| 955 } | |
| 956 | |
|
556
eb2060caca7d
Switch source of o2 sensor data depending on availability of external ADC:
Ideenmodellierer
parents:
539
diff
changeset
|
957 |
|
eb2060caca7d
Switch source of o2 sensor data depending on availability of external ADC:
Ideenmodellierer
parents:
539
diff
changeset
|
958 /* internal sensor: HUD data */ |
| 559 | 959 if(pSettings->ppo2sensors_source == O2_SENSOR_SOURCE_OPTIC) |
|
556
eb2060caca7d
Switch source of o2 sensor data depending on availability of external ADC:
Ideenmodellierer
parents:
539
diff
changeset
|
960 { |
|
716
74cfd91199bd
Added customizable data area for specific sensor data:
Ideenmodellierer
parents:
702
diff
changeset
|
961 pStateReal->lifeData.extIf_sensor_Id = 0; |
|
556
eb2060caca7d
Switch source of o2 sensor data depending on availability of external ADC:
Ideenmodellierer
parents:
539
diff
changeset
|
962 for(int i=0;i<3;i++) |
|
eb2060caca7d
Switch source of o2 sensor data depending on availability of external ADC:
Ideenmodellierer
parents:
539
diff
changeset
|
963 { |
|
eb2060caca7d
Switch source of o2 sensor data depending on availability of external ADC:
Ideenmodellierer
parents:
539
diff
changeset
|
964 pStateReal->lifeData.ppO2Sensor_bar[i] = get_ppO2Sensor_bar(i); |
|
eb2060caca7d
Switch source of o2 sensor data depending on availability of external ADC:
Ideenmodellierer
parents:
539
diff
changeset
|
965 pStateReal->lifeData.sensorVoltage_mV[i] = get_sensorVoltage_mV(i); |
|
eb2060caca7d
Switch source of o2 sensor data depending on availability of external ADC:
Ideenmodellierer
parents:
539
diff
changeset
|
966 } |
|
eb2060caca7d
Switch source of o2 sensor data depending on availability of external ADC:
Ideenmodellierer
parents:
539
diff
changeset
|
967 pStateReal->lifeData.HUD_battery_voltage_V = get_HUD_battery_voltage_V(); |
|
eb2060caca7d
Switch source of o2 sensor data depending on availability of external ADC:
Ideenmodellierer
parents:
539
diff
changeset
|
968 } |
|
eb2060caca7d
Switch source of o2 sensor data depending on availability of external ADC:
Ideenmodellierer
parents:
539
diff
changeset
|
969 else /* use data from external ADC */ |
|
eb2060caca7d
Switch source of o2 sensor data depending on availability of external ADC:
Ideenmodellierer
parents:
539
diff
changeset
|
970 { |
|
eb2060caca7d
Switch source of o2 sensor data depending on availability of external ADC:
Ideenmodellierer
parents:
539
diff
changeset
|
971 if(pStateReal->data_old__lost_connection_to_slave == 0) |
|
eb2060caca7d
Switch source of o2 sensor data depending on availability of external ADC:
Ideenmodellierer
parents:
539
diff
changeset
|
972 { |
|
577
9bb9a52d6ae5
Handle o2 voltage values < 0.5mV as invalid:
Ideenmodellierer
parents:
559
diff
changeset
|
973 for(idx = 0; idx < 3; idx++) |
|
9bb9a52d6ae5
Handle o2 voltage values < 0.5mV as invalid:
Ideenmodellierer
parents:
559
diff
changeset
|
974 { |
| 691 | 975 pStateReal->lifeData.sensorVoltage_mV[idx] = dataIn.data[(dataIn.boolADCO2Data && DATA_BUFFER_ADC)].extADC_voltage[idx]; |
|
577
9bb9a52d6ae5
Handle o2 voltage values < 0.5mV as invalid:
Ideenmodellierer
parents:
559
diff
changeset
|
976 if(pStateReal->lifeData.sensorVoltage_mV[idx] < IGNORE_O2_VOLTAGE_LEVEL_MV) |
|
9bb9a52d6ae5
Handle o2 voltage values < 0.5mV as invalid:
Ideenmodellierer
parents:
559
diff
changeset
|
977 { |
|
9bb9a52d6ae5
Handle o2 voltage values < 0.5mV as invalid:
Ideenmodellierer
parents:
559
diff
changeset
|
978 pStateReal->lifeData.sensorVoltage_mV[idx] = 0.0; |
|
9bb9a52d6ae5
Handle o2 voltage values < 0.5mV as invalid:
Ideenmodellierer
parents:
559
diff
changeset
|
979 pStateReal->lifeData.ppO2Sensor_bar[idx] = 0; |
|
9bb9a52d6ae5
Handle o2 voltage values < 0.5mV as invalid:
Ideenmodellierer
parents:
559
diff
changeset
|
980 } |
|
9bb9a52d6ae5
Handle o2 voltage values < 0.5mV as invalid:
Ideenmodellierer
parents:
559
diff
changeset
|
981 else |
|
9bb9a52d6ae5
Handle o2 voltage values < 0.5mV as invalid:
Ideenmodellierer
parents:
559
diff
changeset
|
982 { |
| 796 | 983 if(dataIn.data[(dataIn.boolADCO2Data && DATA_BUFFER_ADC)].sensor_map[idx] == SENSOR_DIGO2M) |
|
702
6d7c812fc173
Added digital o2 sensor to settings and data exchange:
Ideenmodellierer
parents:
691
diff
changeset
|
984 { |
|
6d7c812fc173
Added digital o2 sensor to settings and data exchange:
Ideenmodellierer
parents:
691
diff
changeset
|
985 pStateReal->lifeData.ppO2Sensor_bar[idx] = pStateReal->lifeData.sensorVoltage_mV[idx] / 100.0; |
|
6d7c812fc173
Added digital o2 sensor to settings and data exchange:
Ideenmodellierer
parents:
691
diff
changeset
|
986 } |
|
6d7c812fc173
Added digital o2 sensor to settings and data exchange:
Ideenmodellierer
parents:
691
diff
changeset
|
987 else |
|
6d7c812fc173
Added digital o2 sensor to settings and data exchange:
Ideenmodellierer
parents:
691
diff
changeset
|
988 { |
|
6d7c812fc173
Added digital o2 sensor to settings and data exchange:
Ideenmodellierer
parents:
691
diff
changeset
|
989 pStateReal->lifeData.ppO2Sensor_bar[idx] = pStateReal->lifeData.sensorVoltage_mV[idx] * pSettings->ppo2sensors_calibCoeff[idx]; |
|
6d7c812fc173
Added digital o2 sensor to settings and data exchange:
Ideenmodellierer
parents:
691
diff
changeset
|
990 } |
|
577
9bb9a52d6ae5
Handle o2 voltage values < 0.5mV as invalid:
Ideenmodellierer
parents:
559
diff
changeset
|
991 } |
|
716
74cfd91199bd
Added customizable data area for specific sensor data:
Ideenmodellierer
parents:
702
diff
changeset
|
992 } |
|
556
eb2060caca7d
Switch source of o2 sensor data depending on availability of external ADC:
Ideenmodellierer
parents:
539
diff
changeset
|
993 } |
|
eb2060caca7d
Switch source of o2 sensor data depending on availability of external ADC:
Ideenmodellierer
parents:
539
diff
changeset
|
994 } |
|
eb2060caca7d
Switch source of o2 sensor data depending on availability of external ADC:
Ideenmodellierer
parents:
539
diff
changeset
|
995 |
|
137
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
996 if(pStateReal->data_old__lost_connection_to_slave == 0) |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
997 { |
|
734
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
728
diff
changeset
|
998 |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
728
diff
changeset
|
999 pStateReal->lifeData.extIf_sensor_Id = dataIn.data[(dataIn.boolADCO2Data && DATA_BUFFER_ADC)].externalInterface_SensorID; |
| 786 | 1000 if(pStateReal->lifeData.extIf_sensor_Id < 3) |
|
734
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
728
diff
changeset
|
1001 { |
| 780 | 1002 |
| 786 | 1003 memcpy(pStateReal->lifeData.extIf_sensor_data[pStateReal->lifeData.extIf_sensor_Id], dataIn.data[(dataIn.boolADCO2Data && DATA_BUFFER_ADC)].sensor_data, 32); |
|
734
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
728
diff
changeset
|
1004 } |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
728
diff
changeset
|
1005 memcpy(pStateReal->lifeData.extIf_sensor_map, dataIn.data[(dataIn.boolADCO2Data && DATA_BUFFER_ADC)].sensor_map, EXT_INTERFACE_SENSOR_CNT); |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
728
diff
changeset
|
1006 |
|
190e5814b2f5
Removed interface selection from sensor menu:
Ideenmodellierer
parents:
728
diff
changeset
|
1007 |
|
173
05c770dc2911
Bugfix: make max depth move with current depth (part 1)
Jan Mulder <jlmulder@xs4all.nl>
parents:
156
diff
changeset
|
1008 meter = getSampleDepth(&dataIn, pStateReal); |
| 38 | 1009 |
|
137
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1010 pStateReal->pressure_uTick_old = pStateReal->pressure_uTick_new; |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1011 pStateReal->pressure_uTick_new = dataIn.data[dataIn.boolPressureData].pressure_uTick; |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1012 pStateReal->pressure_uTick_local_new = HAL_GetTick(); |
| 38 | 1013 |
|
137
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1014 pStateReal->lifeData.dateBinaryFormat = dataIn.data[dataIn.boolTimeData].localtime_rtc_dr; |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1015 pStateReal->lifeData.timeBinaryFormat = dataIn.data[dataIn.boolTimeData].localtime_rtc_tr; |
|
899
2225c467f1e9
Added data path and visualization for position data:
Ideenmodellierer
parents:
842
diff
changeset
|
1016 |
|
2225c467f1e9
Added data path and visualization for position data:
Ideenmodellierer
parents:
842
diff
changeset
|
1017 pStateReal->lifeData.gnssPosition.Latitude = dataIn.data[0].fLat; |
|
2225c467f1e9
Added data path and visualization for position data:
Ideenmodellierer
parents:
842
diff
changeset
|
1018 pStateReal->lifeData.gnssPosition.Longitude = dataIn.data[0].fLon; |
|
137
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1019 } |
| 38 | 1020 |
| 141 | 1021 if(pStateReal->data_old__lost_connection_to_slave == 0) |
| 38 | 1022 { |
| 141 | 1023 //Start of diveMode? |
| 1024 if(pStateReal->mode != MODE_DIVE && dataIn.mode == MODE_DIVE) | |
| 1025 { | |
| 1026 if(modeChangeFlag) | |
| 1027 { | |
| 1028 *modeChangeFlag = 1; | |
| 1029 } | |
| 1030 if(stateUsed == stateSimGetPointer()) | |
| 38 | 1031 { |
| 1032 simulation_exit(); | |
| 1033 } | |
|
805
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
796
diff
changeset
|
1034 disableTimer(); |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
796
diff
changeset
|
1035 |
| 141 | 1036 // new 170508 |
| 38 | 1037 settingsGetPointer()->bluetoothActive = 0; |
| 1038 MX_Bluetooth_PowerOff(); | |
| 1039 //Init dive Mode | |
| 141 | 1040 decoLock = DECO_CALC_init_as_is_start_of_dive; |
| 1041 pStateReal->lifeData.boolResetAverageDepth = 1; | |
|
924
4d98fb2a178e
Bugfix real scrubber time decreased in sim mode:
Ideenmodellierer
parents:
920
diff
changeset
|
1042 |
|
4d98fb2a178e
Bugfix real scrubber time decreased in sim mode:
Ideenmodellierer
parents:
920
diff
changeset
|
1043 memcpy(pStateReal->scrubberDataDive, pSettings->scrubberData, sizeof(pStateReal->scrubberDataDive)); |
| 38 | 1044 } |
| 141 | 1045 |
|
197
c853f5d23bb7
cleanup: fix (harmless) use before assign
Jan Mulder <jlmulder@xs4all.nl>
parents:
189
diff
changeset
|
1046 pStateReal->lifeData.cns = dataIn.data[dataIn.boolToxicData].cns; |
|
c853f5d23bb7
cleanup: fix (harmless) use before assign
Jan Mulder <jlmulder@xs4all.nl>
parents:
189
diff
changeset
|
1047 pStateReal->lifeData.otu = dataIn.data[dataIn.boolToxicData].otu; |
|
c853f5d23bb7
cleanup: fix (harmless) use before assign
Jan Mulder <jlmulder@xs4all.nl>
parents:
189
diff
changeset
|
1048 pStateReal->lifeData.no_fly_time_minutes = dataIn.data[dataIn.boolToxicData].no_fly_time_minutes; |
|
c853f5d23bb7
cleanup: fix (harmless) use before assign
Jan Mulder <jlmulder@xs4all.nl>
parents:
189
diff
changeset
|
1049 pStateReal->lifeData.desaturation_time_minutes = dataIn.data[dataIn.boolToxicData].desaturation_time_minutes; |
|
c853f5d23bb7
cleanup: fix (harmless) use before assign
Jan Mulder <jlmulder@xs4all.nl>
parents:
189
diff
changeset
|
1050 |
| 141 | 1051 //End of diveMode? |
| 1052 if(pStateReal->mode == MODE_DIVE && dataIn.mode != MODE_DIVE) | |
| 1053 { | |
| 1054 if(modeChangeFlag) | |
| 1055 { | |
| 1056 *modeChangeFlag = 1; | |
| 1057 } | |
| 1058 createDiveSettings(); | |
| 38 | 1059 |
|
805
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
796
diff
changeset
|
1060 disableTimer(); |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
796
diff
changeset
|
1061 |
| 141 | 1062 if(pStateReal->warnings.cnsHigh) |
| 1063 { | |
| 1064 if(pStateReal->lifeData.cns >= 130) | |
| 1065 dataOut.setAccidentFlag += ACCIDENT_CNSLVL2; | |
| 1066 else if(pStateReal->lifeData.cns >= 100) | |
| 1067 dataOut.setAccidentFlag += ACCIDENT_CNS; | |
| 1068 } | |
| 1069 if(pStateReal->warnings.decoMissed) | |
| 1070 dataOut.setAccidentFlag += ACCIDENT_DECOSTOP; | |
|
924
4d98fb2a178e
Bugfix real scrubber time decreased in sim mode:
Ideenmodellierer
parents:
920
diff
changeset
|
1071 |
|
4d98fb2a178e
Bugfix real scrubber time decreased in sim mode:
Ideenmodellierer
parents:
920
diff
changeset
|
1072 memcpy(pSettings->scrubberData, pStateReal->scrubberDataDive, sizeof(pStateReal->scrubberDataDive)); /* Store value of current usage */ |
| 141 | 1073 } |
| 1074 pStateReal->mode = dataIn.mode; | |
| 1075 pStateReal->chargeStatus = dataIn.chargeStatus; | |
|
137
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1076 |
|
306
2f43419102c8
bugfix, cleanup: do not clip depth to 0
Jan Mulder <jlmulder@xs4all.nl>
parents:
288
diff
changeset
|
1077 pStateReal->lifeData.depth_meter = meter; |
| 141 | 1078 |
|
189
8b8074080d7b
Bugfix: average temperature on arrival from RTE instead of display time
Jan Mulder <jlmulder@xs4all.nl>
parents:
173
diff
changeset
|
1079 pStateReal->lifeData.temperature_celsius = getTemperature(&dataIn); |
|
137
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1080 pStateReal->lifeData.ascent_rate_meter_per_min = dataIn.data[dataIn.boolPressureData].ascent_rate_meter_per_min; |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1081 if(pStateReal->mode != MODE_DIVE) |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1082 pStateReal->lifeData.max_depth_meter = 0; |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1083 else |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1084 { |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1085 if(meter > pStateReal->lifeData.max_depth_meter) |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1086 pStateReal->lifeData.max_depth_meter = meter; |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1087 } |
| 38 | 1088 |
| 662 | 1089 if(requestNecessary.ub.clearDeco == 0) /* No "reset deco" is send to RTE ? */ |
| 1090 { | |
| 1091 if(dataIn.accidentFlags & ACCIDENT_DECOSTOP) | |
| 1092 { | |
| 1093 pStateReal->decoMissed_at_the_end_of_dive = 1; | |
| 1094 } | |
| 1095 else | |
| 1096 { | |
| 1097 pStateReal->decoMissed_at_the_end_of_dive = 0; | |
| 1098 } | |
| 1099 if(dataIn.accidentFlags & ACCIDENT_CNS) | |
| 1100 { | |
| 1101 pStateReal->cnsHigh_at_the_end_of_dive = 1; | |
| 1102 } | |
| 1103 else | |
| 1104 { | |
| 1105 pStateReal->cnsHigh_at_the_end_of_dive = 0; | |
| 1106 } | |
| 1107 } | |
|
137
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1108 pStateReal->lifeData.dive_time_seconds = (int32_t)dataIn.data[dataIn.boolTimeData].divetime_seconds; |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1109 pStateReal->lifeData.dive_time_seconds_without_surface_time = (int32_t)dataIn.data[dataIn.boolTimeData].dive_time_seconds_without_surface_time; |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1110 pStateReal->lifeData.counterSecondsShallowDepth = dataIn.data[dataIn.boolTimeData].counterSecondsShallowDepth; |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1111 pStateReal->lifeData.surface_time_seconds = (int32_t)dataIn.data[dataIn.boolTimeData].surfacetime_seconds; |
| 38 | 1112 |
|
137
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1113 pStateReal->lifeData.compass_heading = dataIn.data[dataIn.boolCompassData].compass_heading; |
|
776
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
763
diff
changeset
|
1114 if (pStateReal->lifeData.compass_heading != -1) { |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
763
diff
changeset
|
1115 if (pSettings->FlipDisplay) { /* consider that diver is targeting into the opposite direction */ |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
763
diff
changeset
|
1116 pStateReal->lifeData.compass_heading -= 180.0; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
763
diff
changeset
|
1117 } |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
763
diff
changeset
|
1118 |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
763
diff
changeset
|
1119 if (pSettings->compassDeclinationDeg != 0) { |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
763
diff
changeset
|
1120 pStateReal->lifeData.compass_heading = pStateReal->lifeData.compass_heading + pSettings->compassDeclinationDeg - 360.0; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
763
diff
changeset
|
1121 } |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
763
diff
changeset
|
1122 |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
763
diff
changeset
|
1123 while (pStateReal->lifeData.compass_heading < 0) { |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
763
diff
changeset
|
1124 pStateReal->lifeData.compass_heading += 360.0; |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
763
diff
changeset
|
1125 } |
|
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
763
diff
changeset
|
1126 } |
|
109
65a6e352ce08
Consider computer heading in case of a flipped display
Ideenmodellierer
parents:
51
diff
changeset
|
1127 |
|
137
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1128 pStateReal->lifeData.compass_roll = dataIn.data[dataIn.boolCompassData].compass_roll; |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1129 pStateReal->lifeData.compass_pitch = dataIn.data[dataIn.boolCompassData].compass_pitch; |
| 38 | 1130 |
|
137
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1131 pStateReal->lifeData.compass_DX_f = dataIn.data[dataIn.boolCompassData].compass_DX_f; |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1132 pStateReal->lifeData.compass_DY_f = dataIn.data[dataIn.boolCompassData].compass_DY_f; |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1133 pStateReal->lifeData.compass_DZ_f = dataIn.data[dataIn.boolCompassData].compass_DZ_f; |
| 38 | 1134 |
|
137
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1135 pStateReal->compass_uTick_old = pStateReal->compass_uTick_new; |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1136 pStateReal->compass_uTick_new = dataIn.data[dataIn.boolCompassData].compass_uTick; |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1137 pStateReal->compass_uTick_local_new = HAL_GetTick(); |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
497
diff
changeset
|
1138 compass_Inertia(pStateReal->lifeData.compass_heading); |
|
137
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1139 |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1140 memcpy(pStateReal->lifeData.tissue_nitrogen_bar, dataIn.data[dataIn.boolTisssueData].tissue_nitrogen_bar,sizeof(pStateReal->lifeData.tissue_nitrogen_bar)); |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1141 memcpy(pStateReal->lifeData.tissue_helium_bar, dataIn.data[dataIn.boolTisssueData].tissue_helium_bar,sizeof(pStateReal->lifeData.tissue_helium_bar)); |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1142 |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1143 if(pStateReal->mode == MODE_DIVE) |
| 38 | 1144 { |
|
137
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1145 for(int i= 0; i <16; i++) |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1146 { |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1147 pStateReal->vpm.max_crushing_pressure_he[i] = dataIn.data[dataIn.boolCrushingData].max_crushing_pressure_he[i]; |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1148 pStateReal->vpm.max_crushing_pressure_n2[i] = dataIn.data[dataIn.boolCrushingData].max_crushing_pressure_n2[i]; |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1149 pStateReal->vpm.adjusted_critical_radius_he[i] = dataIn.data[dataIn.boolCrushingData].adjusted_critical_radius_he[i]; |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1150 pStateReal->vpm.adjusted_critical_radius_n2[i] = dataIn.data[dataIn.boolCrushingData].adjusted_critical_radius_n2[i]; |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1151 } |
| 38 | 1152 } |
| 1153 | |
|
137
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1154 /* battery and ambient light sensors |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1155 */ |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1156 pStateReal->lifeData.ambient_light_level = dataIn.data[dataIn.boolAmbientLightData].ambient_light_level; |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1157 pStateReal->lifeData.battery_charge = dataIn.data[dataIn.boolBatteryData].battery_charge; |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1158 pStateReal->lifeData.battery_voltage = dataIn.data[dataIn.boolBatteryData].battery_voltage; |
|
275
189387bf23a8
Do not mark data as valid if devicedata is received.
ideenmodellierer
parents:
232
diff
changeset
|
1159 |
|
189387bf23a8
Do not mark data as valid if devicedata is received.
ideenmodellierer
parents:
232
diff
changeset
|
1160 /* PIC data |
|
189387bf23a8
Do not mark data as valid if devicedata is received.
ideenmodellierer
parents:
232
diff
changeset
|
1161 */ |
|
189387bf23a8
Do not mark data as valid if devicedata is received.
ideenmodellierer
parents:
232
diff
changeset
|
1162 for(int i=0;i<4;i++) |
|
189387bf23a8
Do not mark data as valid if devicedata is received.
ideenmodellierer
parents:
232
diff
changeset
|
1163 { |
|
189387bf23a8
Do not mark data as valid if devicedata is received.
ideenmodellierer
parents:
232
diff
changeset
|
1164 pStateReal->lifeData.buttonPICdata[i] = dataIn.data[dataIn.boolPICdata].button_setting[i]; |
|
189387bf23a8
Do not mark data as valid if devicedata is received.
ideenmodellierer
parents:
232
diff
changeset
|
1165 } |
|
189387bf23a8
Do not mark data as valid if devicedata is received.
ideenmodellierer
parents:
232
diff
changeset
|
1166 |
|
189387bf23a8
Do not mark data as valid if devicedata is received.
ideenmodellierer
parents:
232
diff
changeset
|
1167 /* sensorErrors |
|
189387bf23a8
Do not mark data as valid if devicedata is received.
ideenmodellierer
parents:
232
diff
changeset
|
1168 */ |
|
189387bf23a8
Do not mark data as valid if devicedata is received.
ideenmodellierer
parents:
232
diff
changeset
|
1169 pStateReal->sensorErrorsRTE = dataIn.sensorErrors; |
| 662 | 1170 |
| 1171 /* data from CO2 sensor */ | |
| 831 | 1172 pStateReal->lifeData.CO2_data.CO2_ppm = dataIn.data[(dataIn.boolADCO2Data && DATA_BUFFER_CO2)].CO2_ppm; |
| 691 | 1173 pStateReal->lifeData.CO2_data.signalStrength = dataIn.data[(dataIn.boolADCO2Data && DATA_BUFFER_CO2)].CO2_signalStrength; |
|
747
df0d43da1614
Added pressure compensation to CO2 detection:
Ideenmodellierer
parents:
734
diff
changeset
|
1174 |
|
df0d43da1614
Added pressure compensation to CO2 detection:
Ideenmodellierer
parents:
734
diff
changeset
|
1175 #ifdef ENABLE_EXTERNAL_PRESSURE |
|
df0d43da1614
Added pressure compensation to CO2 detection:
Ideenmodellierer
parents:
734
diff
changeset
|
1176 CO2Corr = 2.811*pow(10,-38)*pow(pStateReal->lifeData.CO2_data.CO2_ppm,6)- 9.817*pow(10,-32)*pow(pStateReal->lifeData.CO2_data.CO2_ppm,5)+1.304*pow(10,-25)*pow(pStateReal->lifeData.CO2_data.CO2_ppm,4) |
|
df0d43da1614
Added pressure compensation to CO2 detection:
Ideenmodellierer
parents:
734
diff
changeset
|
1177 -8.216*pow(10,-20)*pow(pStateReal->lifeData.CO2_data.CO2_ppm,3)+2.311*pow(10,-14)*pow(pStateReal->lifeData.CO2_data.CO2_ppm,2) - 2.195*pow(10,-9)*pStateReal->lifeData.CO2_data.CO2_ppm - 1.471*pow(10,-3); |
|
df0d43da1614
Added pressure compensation to CO2 detection:
Ideenmodellierer
parents:
734
diff
changeset
|
1178 pStateReal->lifeData.CO2_data.CO2_ppm = pStateReal->lifeData.CO2_data.CO2_ppm / (1.0 + (CO2Corr * ((stateRealGetPointer()->lifeData.pressure_surface_bar * 1000) - ((stateRealGetPointer()->lifeData.ppO2Sensor_bar[2] *1000))))); |
|
df0d43da1614
Added pressure compensation to CO2 detection:
Ideenmodellierer
parents:
734
diff
changeset
|
1179 #endif |
|
137
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1180 } |
| 38 | 1181 |
| 1182 /* apnea specials | |
| 1183 */ | |
| 1184 if(pStateReal->diveSettings.diveMode == DIVEMODE_Apnea) | |
| 1185 { | |
| 1186 if(pStateReal->mode != MODE_DIVE) | |
| 1187 { | |
| 1188 pStateReal->lifeData.apnea_total_max_depth_meter = 0; | |
| 1189 pStateReal->lifeData.apnea_last_dive_time_seconds = 0; | |
| 1190 pStateReal->lifeData.apnea_last_max_depth_meter = 0; | |
| 1191 } | |
| 1192 else | |
| 1193 { | |
| 1194 if(pStateReal->lifeData.max_depth_meter > pStateReal->lifeData.apnea_total_max_depth_meter) | |
| 1195 pStateReal->lifeData.apnea_total_max_depth_meter = pStateReal->lifeData.max_depth_meter; | |
| 1196 } | |
| 1197 | |
| 1198 if(pStateReal->lifeData.dive_time_seconds > 15) | |
| 1199 { | |
| 1200 pStateReal->lifeData.apnea_last_dive_time_seconds = pStateReal->lifeData.dive_time_seconds; | |
| 1201 } | |
| 1202 | |
| 1203 if(pStateReal->lifeData.counterSecondsShallowDepth) | |
| 1204 { | |
| 1205 if(pStateReal->lifeData.max_depth_meter > 1.5f) | |
| 1206 { | |
| 1207 pStateReal->lifeData.apnea_last_max_depth_meter = pStateReal->lifeData.max_depth_meter; | |
| 1208 } | |
|
173
05c770dc2911
Bugfix: make max depth move with current depth (part 1)
Jan Mulder <jlmulder@xs4all.nl>
parents:
156
diff
changeset
|
1209 // reset max_depth_meter, average_depth_meter and internal values |
| 38 | 1210 pStateReal->lifeData.max_depth_meter = 0; |
| 1211 pStateReal->lifeData.boolResetAverageDepth = 1; | |
| 1212 } | |
| 1213 } | |
| 1214 | |
|
308
1203255481e4
cleanup: introduce function setAvgDepth
Jan Mulder <jlmulder@xs4all.nl>
parents:
307
diff
changeset
|
1215 setAvgDepth(pStateReal); |
|
1203255481e4
cleanup: introduce function setAvgDepth
Jan Mulder <jlmulder@xs4all.nl>
parents:
307
diff
changeset
|
1216 } |
|
1203255481e4
cleanup: introduce function setAvgDepth
Jan Mulder <jlmulder@xs4all.nl>
parents:
307
diff
changeset
|
1217 |
|
1203255481e4
cleanup: introduce function setAvgDepth
Jan Mulder <jlmulder@xs4all.nl>
parents:
307
diff
changeset
|
1218 void setAvgDepth(SDiveState *pStateReal) { |
|
1203255481e4
cleanup: introduce function setAvgDepth
Jan Mulder <jlmulder@xs4all.nl>
parents:
307
diff
changeset
|
1219 |
| 38 | 1220 float *AvgDepthValue = &pStateReal->lifeData.average_depth_meter; |
| 1221 float DepthNow = pStateReal->lifeData.depth_meter; | |
|
309
b0045281cb2d
cleanup: factor out SHelper typedef (and more)
Jan Mulder <jlmulder@xs4all.nl>
parents:
308
diff
changeset
|
1222 static uint32_t AvgDepthCount = 0; |
|
b0045281cb2d
cleanup: factor out SHelper typedef (and more)
Jan Mulder <jlmulder@xs4all.nl>
parents:
308
diff
changeset
|
1223 static uint32_t AvgDepthTimer = 0; |
| 38 | 1224 uint32_t AvgSecondsSinceLast; |
| 1225 uint32_t DiveTime = pStateReal->lifeData.dive_time_seconds_without_surface_time; | |
|
308
1203255481e4
cleanup: introduce function setAvgDepth
Jan Mulder <jlmulder@xs4all.nl>
parents:
307
diff
changeset
|
1226 |
| 38 | 1227 if(pStateReal->lifeData.boolResetAverageDepth) |
| 1228 { | |
| 1229 *AvgDepthValue = DepthNow; | |
|
309
b0045281cb2d
cleanup: factor out SHelper typedef (and more)
Jan Mulder <jlmulder@xs4all.nl>
parents:
308
diff
changeset
|
1230 AvgDepthCount = 0; |
|
b0045281cb2d
cleanup: factor out SHelper typedef (and more)
Jan Mulder <jlmulder@xs4all.nl>
parents:
308
diff
changeset
|
1231 AvgDepthTimer = DiveTime; |
| 38 | 1232 pStateReal->lifeData.boolResetAverageDepth = 0; |
| 1233 } | |
|
309
b0045281cb2d
cleanup: factor out SHelper typedef (and more)
Jan Mulder <jlmulder@xs4all.nl>
parents:
308
diff
changeset
|
1234 else if (DiveTime > AvgDepthTimer) |
| 38 | 1235 { |
|
309
b0045281cb2d
cleanup: factor out SHelper typedef (and more)
Jan Mulder <jlmulder@xs4all.nl>
parents:
308
diff
changeset
|
1236 AvgSecondsSinceLast = DiveTime - AvgDepthTimer; |
| 38 | 1237 for(int i=0;i<AvgSecondsSinceLast;i++) |
| 1238 { | |
|
309
b0045281cb2d
cleanup: factor out SHelper typedef (and more)
Jan Mulder <jlmulder@xs4all.nl>
parents:
308
diff
changeset
|
1239 *AvgDepthValue = (*AvgDepthValue * AvgDepthCount + DepthNow) / (AvgDepthCount + 1); |
|
b0045281cb2d
cleanup: factor out SHelper typedef (and more)
Jan Mulder <jlmulder@xs4all.nl>
parents:
308
diff
changeset
|
1240 AvgDepthCount += 1; |
| 38 | 1241 } |
|
309
b0045281cb2d
cleanup: factor out SHelper typedef (and more)
Jan Mulder <jlmulder@xs4all.nl>
parents:
308
diff
changeset
|
1242 AvgDepthTimer = DiveTime; |
| 38 | 1243 } |
|
309
b0045281cb2d
cleanup: factor out SHelper typedef (and more)
Jan Mulder <jlmulder@xs4all.nl>
parents:
308
diff
changeset
|
1244 if(AvgDepthCount == 0) |
|
b0045281cb2d
cleanup: factor out SHelper typedef (and more)
Jan Mulder <jlmulder@xs4all.nl>
parents:
308
diff
changeset
|
1245 *AvgDepthValue = DepthNow; |
| 38 | 1246 } |
| 1247 | |
| 1248 | |
| 1249 uint8_t DataEX_check_RTE_version__needs_update(void) | |
| 1250 { | |
| 1251 if(data_old__lost_connection_to_slave_counter_retry > 10) | |
| 1252 return 1; | |
| 1253 else | |
| 1254 { | |
| 1255 if(stateRealGetPointer()->data_old__lost_connection_to_slave == 0) | |
| 1256 { | |
| 1257 setActualRTEversion(dataIn.RTE_VERSION_high, dataIn.RTE_VERSION_low); | |
| 1258 | |
| 1259 if(RTEminimum_required_high() < dataIn.RTE_VERSION_high) | |
| 1260 return 0; | |
| 1261 else | |
| 1262 if((RTEminimum_required_high() == dataIn.RTE_VERSION_high) && (RTEminimum_required_low() <= dataIn.RTE_VERSION_low)) | |
| 1263 return 0; | |
| 1264 else | |
| 1265 return 1; | |
| 1266 } | |
| 1267 else | |
| 1268 return 0; | |
| 1269 } | |
| 1270 } | |
| 1271 | |
| 1272 | |
| 1273 /* Private functions ---------------------------------------------------------*/ | |
| 1274 | |
|
198
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
1275 /* Check if there is an empty frame provided by RTE (all 0) or even no data provided by RTE (all 0xFF) |
|
137
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1276 * If that is not the case the DMA is somehow not in sync |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1277 */ |
|
198
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
1278 static uint8_t DataEX_check_header_and_footer_shifted() |
|
137
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1279 { |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1280 uint8_t ret = 1; |
| 141 | 1281 if((dataIn.footer.checkCode[0] == 0x00) |
| 1282 && (dataIn.footer.checkCode[1] == 0x00) | |
| 1283 && (dataIn.footer.checkCode[2] == 0x00) | |
| 1284 && (dataIn.footer.checkCode[3] == 0x00)) { ret = 0; } | |
|
137
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1285 |
| 141 | 1286 if((dataIn.footer.checkCode[0] == 0xff) |
| 1287 && (dataIn.footer.checkCode[1] == 0xff) | |
| 1288 && (dataIn.footer.checkCode[2] == 0xff) | |
| 1289 && (dataIn.footer.checkCode[3] == 0xff)) { ret = 0; } | |
|
137
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1290 |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1291 return ret; |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1292 } |
|
9eda5a75c5fd
Only copy data if data connection to RTE is valid
Ideenmodellierer
parents:
133
diff
changeset
|
1293 |
|
198
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
1294 static uint8_t DataEX_check_header_and_footer_ok(void) |
| 38 | 1295 { |
| 1296 if(dataIn.header.checkCode[0] != 0xA1) | |
| 1297 return 0; | |
| 141 | 1298 #if USE_OLD_HEADER_FORMAT |
| 38 | 1299 if(dataIn.header.checkCode[1] != 0xA2) |
| 1300 return 0; | |
| 1301 if(dataIn.header.checkCode[2] != 0xA3) | |
| 1302 return 0; | |
| 141 | 1303 #endif |
| 38 | 1304 if(dataIn.header.checkCode[3] != 0xA4) |
| 1305 return 0; | |
| 1306 if(dataIn.footer.checkCode[0] != 0xE1) | |
| 1307 return 0; | |
| 1308 if(dataIn.footer.checkCode[1] != 0xE2) | |
| 1309 return 0; | |
| 1310 if(dataIn.footer.checkCode[2] != 0xE3) | |
| 1311 return 0; | |
| 1312 if(dataIn.footer.checkCode[3] != 0xE4) | |
| 1313 return 0; | |
| 1314 | |
| 1315 return 1; | |
| 1316 } | |
| 1317 | |
|
198
878dc9e0dbc5
cleanup: another cleanup session (data_exchange_main.c)
Jan Mulder <jlmulder@xs4all.nl>
parents:
197
diff
changeset
|
1318 static uint8_t DataEX_check_header_and_footer_devicedata(void) |
| 38 | 1319 { |
| 1320 if(dataIn.header.checkCode[0] != 0xDF) | |
| 1321 return 0; | |
| 1322 if(dataIn.header.checkCode[1] != 0xDE) | |
| 1323 return 0; | |
| 1324 if(dataIn.header.checkCode[2] != 0xDD) | |
| 1325 return 0; | |
| 1326 if(dataIn.header.checkCode[3] != 0xDC) | |
| 1327 return 0; | |
| 1328 if(dataIn.footer.checkCode[0] != 0xE1) | |
| 1329 return 0; | |
| 1330 if(dataIn.footer.checkCode[1] != 0xE2) | |
| 1331 return 0; | |
| 1332 if(dataIn.footer.checkCode[2] != 0xE3) | |
| 1333 return 0; | |
| 1334 if(dataIn.footer.checkCode[3] != 0xE4) | |
| 1335 return 0; | |
| 1336 | |
| 1337 return 1; | |
| 1338 } | |
|
407
b11e50415982
Bugfix parallel call of external flash functions:
ideenmodellierer
parents:
406
diff
changeset
|
1339 |
|
b11e50415982
Bugfix parallel call of external flash functions:
ideenmodellierer
parents:
406
diff
changeset
|
1340 void DataEX_merge_devicedata(void) |
|
b11e50415982
Bugfix parallel call of external flash functions:
ideenmodellierer
parents:
406
diff
changeset
|
1341 { |
|
b11e50415982
Bugfix parallel call of external flash functions:
ideenmodellierer
parents:
406
diff
changeset
|
1342 if(DeviceDataUpdated) |
|
b11e50415982
Bugfix parallel call of external flash functions:
ideenmodellierer
parents:
406
diff
changeset
|
1343 { |
|
b11e50415982
Bugfix parallel call of external flash functions:
ideenmodellierer
parents:
406
diff
changeset
|
1344 DeviceDataUpdated = 0; |
|
b11e50415982
Bugfix parallel call of external flash functions:
ideenmodellierer
parents:
406
diff
changeset
|
1345 DataEX_merge_DeviceData_and_store(); |
|
b11e50415982
Bugfix parallel call of external flash functions:
ideenmodellierer
parents:
406
diff
changeset
|
1346 } |
|
b11e50415982
Bugfix parallel call of external flash functions:
ideenmodellierer
parents:
406
diff
changeset
|
1347 } |
|
556
eb2060caca7d
Switch source of o2 sensor data depending on availability of external ADC:
Ideenmodellierer
parents:
539
diff
changeset
|
1348 uint8_t DataEX_external_ADC_Present(void) |
|
eb2060caca7d
Switch source of o2 sensor data depending on availability of external ADC:
Ideenmodellierer
parents:
539
diff
changeset
|
1349 { |
|
eb2060caca7d
Switch source of o2 sensor data depending on availability of external ADC:
Ideenmodellierer
parents:
539
diff
changeset
|
1350 uint8_t retval; |
| 559 | 1351 retval = hw_Info.extADC; |
|
556
eb2060caca7d
Switch source of o2 sensor data depending on availability of external ADC:
Ideenmodellierer
parents:
539
diff
changeset
|
1352 |
|
eb2060caca7d
Switch source of o2 sensor data depending on availability of external ADC:
Ideenmodellierer
parents:
539
diff
changeset
|
1353 return retval; |
|
eb2060caca7d
Switch source of o2 sensor data depending on availability of external ADC:
Ideenmodellierer
parents:
539
diff
changeset
|
1354 } |
| 662 | 1355 |
| 1356 void DataEX_setExtInterface_Cmd(uint16_t Cmd) | |
| 1357 { | |
| 1358 externalInterface_Cmd = Cmd; | |
| 1359 return; | |
| 1360 } | |
| 1361 |