Mercurial > public > ostc4
annotate Discovery/Src/logbook.c @ 430:30580cf5ee77
Merged in Ideenmodellierer/ostc4/ImprovmentNVM_2 (pull request #39)
ImprovmentNVM 2
| author | heinrichsweikamp <bitbucket@heinrichsweikamp.com> |
|---|---|
| date | Tue, 18 Feb 2020 07:20:29 +0000 |
| parents | b1091e183d52 |
| children | ee1434824c3f |
| rev | line source |
|---|---|
| 38 | 1 /** |
| 2 ****************************************************************************** | |
| 3 * @copyright heinrichs weikamp | |
| 4 * @file logbook.c | |
| 5 * @author heinrichs weikamp gmbh and heinrichs weikamp gmbh | |
| 6 * @date 22-Apr-2014 | |
| 7 * @version V0.0.3 | |
| 8 * @since 03-Feb-2016 | |
| 9 * @brief Everything about creating and evaluating the logbook | |
| 10 * without the flash part which is included in externLogbookFlash.c | |
| 11 * and the USB/Bluetooth part in tComm.c | |
| 12 * CHANGE V0.0.3 hw: ppO2 sensor values | |
| 13 * CHANGE V0.0.4 hw: fix event bytes according to hwos_interface.odt dated 160610 in bitbucket hwOS | |
| 14 * @bug | |
| 15 * @warning | |
| 16 @verbatim | |
| 17 ============================================================================== | |
| 18 ##### Header ##### | |
| 19 ============================================================================== | |
| 20 [..] SLogbookHeader | |
| 21 The order has changed in comparsion to OSTC3 for perfect alignment | |
| 22 with 16bit and 32bit. The header is 256kB as well. | |
| 23 DO NOT rearrange anything but add new data to a second page | |
| 24 beyond diveHeaderEnd. Use extraPagesWithData to indicate that there is | |
| 25 data available that was not available in the OSTC3 256KB | |
| 26 This data will be behind the diveHeaderEnd. DO NOT delete diveHeaderEnd. | |
| 27 | |
| 28 [..] SLogbookHeaderOSTC3 | |
| 29 is the format used by the OSTC3. | |
| 30 logbook_getHeaderOSTC3() does the job using the global headers in logbook.c | |
| 31 | |
| 32 [..] SSmallHeader | |
| 33 - is the format used by the OSTC3 | |
| 34 | |
| 35 [..] Summary | |
| 36 The header format is not perfect and might be optimized prior to | |
| 37 releasing the diving computer. For now it is good to be compatible | |
| 38 with PC software available for checking the content of the logbook | |
| 39 | |
| 40 | |
| 41 @endverbatim | |
| 42 ****************************************************************************** | |
| 43 * @attention | |
| 44 * | |
| 45 * <h2><center>© COPYRIGHT(c) 2014 heinrichs weikamp</center></h2> | |
| 46 * | |
| 47 ****************************************************************************** | |
| 48 */ | |
| 49 | |
| 50 /* Includes ------------------------------------------------------------------*/ | |
| 51 #include <stdint.h> | |
| 52 #include <string.h> | |
| 53 #include "logbook.h" | |
| 54 //#include "test_vpm.h" | |
| 55 #include "externLogbookFlash.h" | |
| 56 #include "data_exchange.h" | |
| 57 #include "decom.h" | |
| 58 #include "tHome.h" // for tHome_findNextStop() | |
| 59 | |
| 60 /* Private types -------------------------------------------------------------*/ | |
| 61 | |
| 62 #define NUM_GASES 5 | |
| 63 | |
| 64 #define LOGBOOK_VERSION (0x30) | |
| 65 #define LOGBOOK_VERSION_OSTC3 (0x24) | |
| 66 | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
67 #define DEFAULT_SAMPLES (100) /* Number of sample data bytes in case of an broken header information */ |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
68 |
| 38 | 69 typedef struct /* don't forget to adjust void clear_divisor(void) */ |
| 70 { | |
| 71 uint8_t temperature; | |
| 72 uint8_t deco_ndl; | |
| 73 uint8_t gradientFactor; | |
| 74 uint8_t ppo2; | |
| 75 uint8_t decoplan; | |
| 76 uint8_t cns; | |
| 77 uint8_t tank; | |
| 78 } SDivisor; | |
| 79 | |
| 80 /* Exported variables --------------------------------------------------------*/ | |
| 81 | |
| 82 /* Private variables ---------------------------------------------------------*/ | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
83 static SLogbookHeader gheader; |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
84 static SLogbookHeaderOSTC3 headerOSTC3; |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
85 static SLogbookHeaderOSTC3compact headerOSTC3compact; |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
86 static SSmallHeader smallHeader; |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
87 static SDivisor divisor; |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
88 static SDivisor divisorBackup; |
| 38 | 89 |
| 90 /* Private function prototypes -----------------------------------------------*/ | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
91 static void clear_divisor(void); |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
92 static void logbook_SetAverageDepth(float average_depth_meter); |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
93 static void logbook_SetMinTemperature(float min_temperature_celsius); |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
94 static void logbook_SetMaxCNS(float max_cns_percentage); |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
95 static void logbook_SetCompartmentDesaturation(const SDiveState * pStateReal); |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
96 static void logbook_SetLastStop(float last_stop_depth_bar); |
|
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
97 static void logbook_writedata(void * data, int length_byte); |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
98 static void logbook_UpdateHeader(const SDiveState * pStateReal); |
| 38 | 99 |
| 100 /* Exported functions --------------------------------------------------------*/ | |
| 101 | |
| 102 void logbook_EndDive(void) | |
| 103 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
104 ext_flash_close_new_dive_log((uint8_t*) &gheader); |
| 38 | 105 } |
| 106 | |
| 107 | |
| 108 // =============================================================================== | |
| 109 // logbook_last_totalDiveCount | |
| 110 /// @brief Fix setting issues | |
| 111 /// @date 04-April-2016 | |
| 112 /// | |
| 113 /// @return diveNumber (totalDiveCounter) of latest log entry, 0 if not a valid header | |
| 114 // =============================================================================== | |
| 115 uint16_t logbook_lastDive_diveNumber(void) | |
| 116 { | |
| 117 SLogbookHeader tempLogbookHeader; | |
| 118 if(logbook_getHeader(0, &tempLogbookHeader)) | |
| 119 { | |
| 120 return tempLogbookHeader.diveNumber; | |
| 121 } | |
| 122 else | |
| 123 { | |
| 124 return 0; | |
| 125 } | |
| 126 } | |
| 127 | |
| 128 | |
| 129 /** | |
| 130 ****************************************************************************** | |
| 131 * @brief logbook_getCurrentHeader. / | |
| 281 | 132 * @author heinrichs weikamp |
| 38 | 133 * @version V0.0.1 |
| 134 * @date 22-April-2014 | |
| 135 ****************************************************************************** | |
| 136 * | |
| 137 * @return SLogbookHeader*: | |
| 138 */ | |
| 139 SLogbookHeader* logbook_getCurrentHeader(void) | |
| 140 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
141 return &gheader; |
| 38 | 142 } |
| 143 | |
| 144 /** | |
| 145 ****************************************************************************** | |
| 146 * @brief logbook_getNumberOfHeaders. / | |
| 147 * @author heinrichs weikamp gmbh | |
| 148 * @version V0.0.1 | |
| 149 * @date 18-May-2016 | |
| 150 ****************************************************************************** | |
| 151 * | |
| 152 * @return uint8_t : number of valid headers (0xFAFA) found. | |
| 153 */ | |
| 154 uint8_t logbook_getNumberOfHeaders(void) | |
| 155 { | |
| 156 return ext_flash_count_dive_headers(); | |
| 157 } | |
| 158 | |
| 159 | |
| 160 /** | |
| 161 ****************************************************************************** | |
| 162 * @brief logbook_getHeader. / | |
| 281 | 163 * @author heinrichs weikamp |
| 38 | 164 * @version V0.0.1 |
| 165 * @date 22-April-2014 | |
| 166 ****************************************************************************** | |
| 167 * | |
| 168 * @param StepBackwards : 0 Last lokbook entry, 1 second to last entry, etc. | |
| 169 * @param SSLogbookHeader* pLogbookHeader: Output found LogbookHeader | |
| 170 * @return uint8_t : 1 = success | |
| 171 */ | |
| 172 uint8_t logbook_getHeader(uint8_t StepBackwards,SLogbookHeader* pLogbookHeader) | |
| 173 { | |
| 174 ext_flash_read_dive_header((uint8_t *)pLogbookHeader, StepBackwards); | |
| 175 if(pLogbookHeader->diveHeaderStart != 0xFAFA) | |
| 176 return 0; | |
| 177 else | |
| 178 return 1; | |
| 179 } | |
| 180 | |
| 181 /** | |
| 182 ****************************************************************************** | |
| 183 * @brief logbook_initNewdiveProfile. / | |
| 184 * creates header and smallHeader from diveState and global Settings | |
| 185 * and writes new lookboock entry on flash device | |
| 186 * diveState | |
| 281 | 187 * @author heinrichs weikamp |
| 38 | 188 * @version V0.0.1 |
| 189 * @date 22-April-2014 | |
| 190 ****************************************************************************** | |
| 191 * | |
| 192 * @param SDiveState* pInfo: Input | |
| 193 * @param SSettings* pSettings: Input | |
| 194 */ | |
| 195 | |
| 196 void logbook_initNewdiveProfile(const SDiveState* pInfo, SSettings* pSettings) | |
| 197 { | |
| 198 RTC_DateTypeDef Sdate; | |
| 199 RTC_TimeTypeDef Stime; | |
| 200 | |
| 201 for(int i = 0; i < sizeof(SLogbookHeader); i++) | |
| 202 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
203 ((uint8_t*)(&gheader))[i] = 0; |
| 38 | 204 } |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
205 gheader.diveHeaderStart = 0xFAFA; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
206 gheader.diveHeaderEnd = 0xFBFB; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
207 gheader.samplingRate = 2; |
| 38 | 208 if(pInfo->diveSettings.diveMode == DIVEMODE_OC) |
| 209 { | |
| 210 for(int i = 0; i < 5; i++) | |
| 211 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
212 gheader.gasordil[i].oxygen_percentage = pSettings->gas[i+1].oxygen_percentage; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
213 gheader.gasordil[i].helium_percentage = pSettings->gas[i+1].helium_percentage; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
214 gheader.gasordil[i].note.uw = pSettings->gas[i+1].note.uw; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
215 gheader.gasordil[i].depth_meter = pSettings->gas[i+1].depth_meter; |
| 38 | 216 } |
| 217 } | |
| 218 else | |
| 219 { | |
| 220 for(int i = 0; i < 5; i++) | |
| 221 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
222 gheader.gasordil[i].oxygen_percentage = pSettings->gas[i+6].oxygen_percentage; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
223 gheader.gasordil[i].helium_percentage = pSettings->gas[i+6].helium_percentage; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
224 gheader.gasordil[i].note.uw = pSettings->gas[i+6].note.uw; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
225 gheader.gasordil[i].depth_meter = pSettings->gas[i+6].depth_meter; |
| 38 | 226 } |
| 227 | |
| 228 for(int i = 0; i < 5; i++) | |
| 229 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
230 gheader.setpoint[i].setpoint_cbar = pSettings->setpoint[i+1].setpoint_cbar; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
231 gheader.setpoint[i].depth_meter = pSettings->setpoint[i+1].depth_meter; |
| 38 | 232 } |
| 233 } | |
| 234 // header.gasordil[pInfo->lifeData.actualGas.GasIdInSettings].depth_meter = 0; | |
| 235 | |
| 236 translateDate(pInfo->lifeData.dateBinaryFormat, &Sdate); | |
| 237 translateTime(pInfo->lifeData.timeBinaryFormat, &Stime); | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
238 gheader.dateYear = Sdate.Year; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
239 gheader.dateMonth = Sdate.Month; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
240 gheader.dateDay = Sdate.Date; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
241 gheader.timeHour = Stime.Hours; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
242 gheader.timeMinute = Stime.Minutes; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
243 gheader.cnsAtBeginning = (uint16_t)pInfo->lifeData.cns; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
244 gheader.surfacePressure_mbar = (uint16_t)(pInfo->lifeData.pressure_surface_bar * 1000); |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
245 gheader.firmwareVersionHigh = firmwareVersion_16bit_high(); |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
246 gheader.firmwareVersionLow = firmwareVersion_16bit_low(); |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
247 gheader.logbookProfileVersion = LOGBOOK_VERSION; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
248 gheader.salinity = pSettings->salinity; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
249 gheader.diveNumber = pSettings->totalDiveCounter; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
250 gheader.personalDiveCount = pSettings->personalDiveCount; |
| 38 | 251 |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
252 gheader.diveMode = pInfo->diveSettings.diveMode; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
253 gheader.CCRmode = pInfo->diveSettings.CCR_Mode; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
254 gheader.lastDecostop_m = pSettings->last_stop_depth_meter; |
| 38 | 255 |
| 256 if(pInfo->diveSettings.deco_type.ub.standard == GF_MODE) | |
| 257 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
258 gheader.decoModel = 1; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
259 gheader.gfLow_or_Vpm_conservatism = pInfo->diveSettings.gf_low; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
260 gheader.gfHigh = pInfo->diveSettings.gf_high; |
| 38 | 261 } |
| 262 else | |
| 263 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
264 gheader.decoModel = 2; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
265 gheader.gfLow_or_Vpm_conservatism = pInfo->diveSettings.vpm_conservatism; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
266 gheader.gfHigh = 0; |
| 38 | 267 } |
| 268 | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
269 memcpy(gheader.n2Compartments, pInfo->lifeData.tissue_nitrogen_bar, 64); |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
270 memcpy(gheader.heCompartments, pInfo->lifeData.tissue_helium_bar, 64); |
| 38 | 271 |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
272 logbook_SetCompartmentDesaturation(pInfo); |
| 38 | 273 |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
274 ext_flash_start_new_dive_log_and_set_actualPointerSample((uint8_t*)&gheader); |
| 38 | 275 |
| 276 smallHeader.profileLength[0] = 0xFF; | |
| 277 smallHeader.profileLength[1] = 0xFF; | |
| 278 smallHeader.profileLength[2] = 0xFF; | |
| 279 smallHeader.samplingRate_seconds = 2; | |
| 280 smallHeader.numDivisors = 7; | |
| 281 | |
| 282 smallHeader.tempType = 0; | |
| 283 smallHeader.tempLength = 2; | |
| 284 smallHeader.tempDivisor = 6; | |
| 285 | |
| 286 smallHeader.deco_ndlType = 1; | |
| 287 smallHeader.deco_ndlLength = 2; | |
| 288 smallHeader.deco_ndlDivisor = 6; //= 6; | |
| 289 | |
| 290 /* GF in % at actual position */ | |
| 291 smallHeader.gfType = 2; | |
| 292 smallHeader.gfLength = 1; | |
| 293 smallHeader.gfDivisor = 0; //12; | |
| 294 | |
| 295 /* 3 Sensors: 8bit ppO2 in 0.01bar, 16bit voltage in 0,1mV */ | |
| 296 smallHeader.ppo2Type = 3; | |
| 297 smallHeader.ppo2Length = 9; | |
| 298 smallHeader.ppo2Divisor = 2; //2 | |
| 299 | |
| 300 /* last 15 stops in minutes (last, second_to_last, ... */ | |
| 301 /* last stop depth is defined in header */ | |
| 302 smallHeader.decoplanType = 4; | |
| 303 smallHeader.decoplanLength = 15; | |
| 304 smallHeader.decoplanDivisor = 12;//12; | |
| 305 | |
| 306 smallHeader.cnsType = 5; | |
| 307 smallHeader.cnsLength = 2; | |
| 308 smallHeader.cnsDivisor = 12; | |
| 309 | |
| 310 smallHeader.tankType = 6; | |
| 311 smallHeader.tankLength = 0; | |
| 312 smallHeader.tankDivisor = 0; | |
| 313 | |
| 314 logbook_writedata((void *) &smallHeader,sizeof(smallHeader)); | |
| 315 | |
| 316 clear_divisor(); | |
| 317 } | |
| 318 | |
| 319 /** | |
| 320 ****************************************************************************** | |
| 321 * @brief clear_divisor / clears divisor struct | |
| 281 | 322 * @author heinrichs weikamp |
| 38 | 323 * @version V0.0.1 |
| 324 * @date 22-April-2014 | |
| 325 ****************************************************************************** | |
| 326 * | |
| 327 */ | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
328 static void clear_divisor(void) |
| 38 | 329 { |
| 330 divisor.cns = smallHeader.cnsDivisor - 1; | |
| 331 divisor.decoplan = smallHeader.decoplanDivisor - 1; | |
| 332 divisor.deco_ndl = smallHeader.deco_ndlDivisor - 1; | |
| 333 divisor.gradientFactor = smallHeader.gfDivisor -1 ; | |
| 334 divisor.ppo2 = smallHeader.ppo2Divisor - 1; | |
| 335 divisor.tank = smallHeader.tankDivisor - 1; | |
| 336 divisor.temperature = smallHeader.tempDivisor - 1; | |
| 337 } | |
| 338 | |
| 339 | |
| 340 /** | |
| 341 ****************************************************************************** | |
| 342 * @brief add16. / adds 16 bit variable to 8 bit array | |
| 281 | 343 * @author heinrichs weikamp |
| 38 | 344 * @version V0.0.1 |
| 345 * @date 22-April-2014 | |
| 346 ****************************************************************************** | |
| 347 * | |
| 348 * @param uint8_t *pos: Output 8 bit array | |
| 349 * @param uint16_t var: 16 bit variable | |
| 350 */ | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
351 static void addU16(uint8_t *pos, uint16_t var) |
| 38 | 352 { |
| 353 *((uint16_t*)pos) = var; | |
| 354 } | |
| 355 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
356 static void addS16(uint8_t *pos, int16_t var) |
| 38 | 357 { |
| 358 *((int16_t*)pos) = var; | |
| 359 } | |
| 360 | |
| 361 /** | |
| 362 ****************************************************************************** | |
| 363 * @brief logbook_writeSample. / Writes one logbook sampl | |
| 281 | 364 * @author heinrichs weikamp |
| 38 | 365 * @date 22-April-2014 |
| 366 * @version V0.0.2 | |
| 367 * @since 20-June-2016 | |
| 368 * @bug Deco/NDL Status fixed in V0.0.2 | |
| 369 | |
| 370 | |
| 371 ****************************************************************************** | |
| 372 * | |
| 373 * @param SDiveState state: | |
| 374 */ | |
| 375 | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
376 void logbook_writeSample(const SDiveState *state) |
| 38 | 377 { |
| 378 uint8_t sample[256]; | |
| 379 // int position = 0; | |
| 380 int length = 0; | |
| 381 // _Bool bEvent = 0; | |
| 382 uint8_t nextstopDepthMeter = 0; | |
| 383 uint16_t nextstopLengthSeconds = 0; | |
| 384 uint8_t nextstopLengthMinutes = 0; | |
| 385 bit8_Type eventByte1, eventByte2; | |
| 386 bit8_Type profileByteFlag; | |
| 387 int i = 0; | |
| 388 for(i = 0; i <256 ;i++) | |
| 389 sample[i] = 0; | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
390 addU16(sample, (uint16_t)(state->lifeData.depth_meter * 100)); |
| 38 | 391 length += 2; |
| 392 sample[2] = 0; | |
| 393 length++; | |
| 394 eventByte1.uw = 0; | |
| 395 eventByte2.uw = 0; | |
| 396 //uint16_t tmpU16 = 0; | |
|
130
b7689d9e888a
Minor changes to improved code quality and to eliminate warnings
Ideenmodellierer
parents:
38
diff
changeset
|
397 const SDecoinfo * pDecoinfo; // new hw 160620 |
| 38 | 398 |
| 399 //BuildEevntyte 1 | |
| 400 // sub old 0-3 only one at a time | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
401 if(state->events.manualMarker) |
| 38 | 402 { |
| 403 eventByte1.uw = 6; | |
| 404 } | |
| 405 else | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
406 if(state->warnings.decoMissed) |
| 38 | 407 { |
| 408 eventByte1.uw = 2; | |
| 409 } | |
| 410 else | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
411 if(state->warnings.ppO2Low) |
| 38 | 412 { |
| 413 eventByte1.uw = 4; | |
| 414 } | |
| 415 else | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
416 if(state->warnings.ppO2High) |
| 38 | 417 { |
| 418 eventByte1.uw = 5; | |
| 419 } | |
| 420 else | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
421 if(state->warnings.lowBattery) |
| 38 | 422 { |
| 423 eventByte1.uw = 7; | |
| 424 } | |
| 425 else | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
426 if(state->warnings.slowWarning) |
| 38 | 427 { |
| 428 eventByte1.uw = 1; | |
| 429 } | |
| 430 // sub bit 4 to 7 | |
| 281 | 431 if(state->events.manualGasSet) |
| 38 | 432 { |
| 433 eventByte1.ub.bit4 = 1; | |
| 434 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
435 if(state->events.gasChange) |
| 38 | 436 { |
| 437 eventByte1.ub.bit5 = 1; | |
| 438 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
439 if(state->events.setpointChange) |
| 38 | 440 { |
| 441 eventByte1.ub.bit6 = 1; | |
| 442 } | |
| 443 // sub bit 7 + eventbyte2 | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
444 if(state->events.bailout) |
| 38 | 445 { |
| 446 eventByte1.ub.bit7 = 1; | |
| 447 eventByte2.ub.bit0 = 1; | |
| 448 } | |
| 449 //Add EventByte 1 | |
| 450 if(eventByte1.uw > 0) | |
| 451 { | |
| 452 sample[length] = eventByte1.uw; | |
| 453 length++; | |
| 454 } | |
| 455 if(eventByte2.uw > 0) | |
| 456 { | |
| 457 sample[length] = eventByte2.uw; | |
| 458 length++; | |
| 459 } | |
| 460 //Add EventInfos | |
| 281 | 461 if(state->events.manualGasSet) |
| 38 | 462 { |
| 463 //manual gas in %O2 & %He | |
| 281 | 464 sample[length] = state->events.info_manualGasSetO2; |
| 38 | 465 length += 1; |
| 281 | 466 sample[length] = state->events.info_manualGasSetHe; |
| 38 | 467 length += 1; |
| 468 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
469 if(state->events.gasChange) |
| 38 | 470 { |
| 471 //Current gas (gasid) | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
472 sample[length] = state->events.info_GasChange; |
| 38 | 473 length += 1; |
| 474 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
475 if(state->events.setpointChange) |
| 38 | 476 { |
| 477 //New setpoint in cbar | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
478 sample[length] = state->events.info_SetpointChange; |
| 38 | 479 length += 1; |
| 480 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
481 if(state->events.bailout) |
| 38 | 482 { |
| 483 //bailout gas in % O2 & %He | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
484 sample[length] = state->events.info_bailoutO2; |
| 38 | 485 length += 1; |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
486 sample[length] = state->events.info_bailoutHe; |
| 38 | 487 length += 1; |
| 488 } | |
| 489 | |
| 490 | |
| 491 if(divisor.temperature == 0) | |
| 492 { | |
| 493 divisor.temperature = smallHeader.tempDivisor - 1; | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
494 addS16(&sample[length], (int16_t)((state->lifeData.temperature_celsius * 10.0f) + 0.5f)); |
| 38 | 495 length += 2; |
| 496 } | |
| 497 else | |
| 498 { | |
| 499 divisor.temperature--; | |
| 500 } | |
| 501 | |
| 502 | |
| 503 if(smallHeader.deco_ndlDivisor > 0) | |
| 504 { | |
| 505 if(divisor.deco_ndl == 0) | |
| 506 { | |
| 507 divisor.deco_ndl = smallHeader.deco_ndlDivisor - 1; | |
| 508 | |
| 509 if(stateUsed->diveSettings.deco_type.ub.standard == GF_MODE) | |
| 510 pDecoinfo = &stateUsed->decolistBuehlmann; | |
| 511 else if(stateUsed->diveSettings.deco_type.ub.standard == VPM_MODE) | |
| 512 pDecoinfo = &stateUsed->decolistVPM; | |
| 513 else // should not happen as only GF and VPM at the moment | |
| 514 { | |
| 515 sample[length] = 0; | |
| 516 length += 1; | |
| 517 sample[length] = 0; | |
| 518 length += 1; | |
| 519 } | |
| 520 | |
| 521 if(pDecoinfo->output_ndl_seconds > 0) | |
| 522 { | |
| 523 sample[length] = 0; | |
| 524 length += 1; | |
|
283
04cdeff80254
Bugfix: write NDL in logbook correctly
Jan Mulder <jlmulder@xs4all.nl>
parents:
281
diff
changeset
|
525 sample[length] = (uint8_t)(pDecoinfo->output_ndl_seconds / 60); |
| 281 | 526 |
| 527 // Limit stored sample within 0 to 240 mins (Since it's 8bit UINT only) | |
| 528 if ((pDecoinfo->output_ndl_seconds / 60) > 240) sample[length] = 240; | |
| 529 if ((pDecoinfo->output_ndl_seconds / 60) < 0) sample[length] = 0; | |
| 530 | |
| 38 | 531 length += 1; |
| 532 } | |
| 533 else if(pDecoinfo->output_time_to_surface_seconds) | |
| 534 { | |
| 535 tHome_findNextStop(pDecoinfo->output_stop_length_seconds, &nextstopDepthMeter, &nextstopLengthSeconds); | |
| 536 nextstopLengthMinutes = (nextstopLengthSeconds +59 ) / 60; | |
| 537 | |
| 538 sample[length] = nextstopDepthMeter; | |
| 539 length += 1; | |
| 540 sample[length] = nextstopLengthMinutes; | |
| 541 length += 1; | |
| 542 } | |
| 543 else | |
| 544 { | |
| 545 sample[length] = 0; | |
| 546 length += 1; | |
| 547 sample[length] = 0; | |
| 548 length += 1; | |
| 549 } | |
| 550 } | |
| 551 else | |
| 552 { | |
| 553 divisor.deco_ndl --; | |
| 554 } | |
| 555 } | |
| 556 | |
| 557 | |
| 558 if(smallHeader.ppo2Divisor) | |
| 559 { | |
| 560 if(divisor.ppo2 == 0) | |
| 561 { | |
| 562 divisor.ppo2 = smallHeader.ppo2Divisor - 1; | |
| 563 | |
| 564 for(int i = 0; i <3; i++) | |
| 565 { | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
566 sample[length] = (uint8_t)(state->lifeData.ppO2Sensor_bar[i] * 100.0f + 0.5f); |
| 38 | 567 length += 1; |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
568 addU16(&sample[length], (uint16_t)(state->lifeData.sensorVoltage_mV[i] * 10.0f + 0.5f)); |
| 38 | 569 length += 2; |
| 570 } | |
| 571 } | |
| 572 else | |
| 573 { | |
| 574 divisor.ppo2--; | |
| 575 } | |
| 576 } | |
| 577 | |
| 578 | |
| 579 if(smallHeader.decoplanDivisor) | |
| 580 { | |
| 581 if(divisor.decoplan == 0) | |
| 582 { | |
| 583 divisor.decoplan = smallHeader.decoplanDivisor - 1; | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
584 if(state->diveSettings.deco_type.ub.standard == VPM_MODE) |
| 38 | 585 { |
| 586 for(int i = 0; i <15; i++) | |
| 587 { | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
588 sample[length] = state->decolistVPM.output_stop_length_seconds[i] / 60; |
| 38 | 589 length += 1; |
| 590 } | |
| 591 } | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
592 else if(state->diveSettings.deco_type.ub.standard == GF_MODE) |
| 38 | 593 { |
| 594 for(int i = 0; i <15; i++) | |
| 595 { | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
596 sample[length] = state->decolistBuehlmann.output_stop_length_seconds[i] / 60; |
| 38 | 597 length += 1; |
| 598 } | |
| 599 } | |
| 600 else | |
| 601 { | |
| 602 for(int i = 0; i <15; i++) | |
| 603 { | |
| 604 sample[length] = 0; | |
| 605 length += 1; | |
| 606 } | |
| 607 } | |
| 608 // add16(&sample[length], state.temperature); | |
| 609 //length += 2; | |
| 610 } | |
| 611 else | |
| 612 { | |
| 613 divisor.decoplan --; | |
| 614 } | |
| 615 } | |
| 616 if(divisor.cns == 0) | |
| 617 { | |
| 618 divisor.cns = smallHeader.cnsDivisor - 1; | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
619 addU16(&sample[length], (uint16_t)state->lifeData.cns); |
| 38 | 620 length += 2; |
| 621 } | |
| 622 else | |
| 623 { | |
| 624 divisor.cns--; | |
| 625 } | |
| 626 | |
| 627 profileByteFlag.uw = length - 3; | |
| 628 if(eventByte1.uw) | |
| 629 { | |
| 630 profileByteFlag.ub.bit7 = 1; | |
| 631 } | |
| 632 sample[2] = profileByteFlag.uw; | |
| 633 logbook_writedata((void *) sample,length); | |
| 634 | |
| 635 } | |
| 636 | |
| 637 /** | |
| 638 ****************************************************************************** | |
| 639 * @brief readSample. / Reads data of one logbook sample | |
| 281 | 640 * @author heinrichs weikamp |
| 38 | 641 * @version V0.0.1 |
| 642 * @date 22-April-2014 | |
| 643 ****************************************************************************** | |
| 644 * | |
| 645 * @param int32_t* depth: output Value | |
| 646 * @param int16_t * gasid: output Value | |
| 647 * @param int32_t* temperature: output Value | |
| 648 * @param int32_t* sensor1, sensor2, sensor3: output Value | |
| 649 * @param int32_t* cns: output Value | |
| 650 * @return bytes read / 0 = reading Error | |
| 651 */ | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
652 static uint16_t readSample(int32_t* depth, int16_t * gasid, int16_t* setpoint_cbar, int32_t* temperature, int32_t* sensor1, int32_t* sensor2, int32_t* sensor3, int32_t* cns, SManualGas* manualGas, int16_t* bailout, int16_t* decostopDepth) |
| 38 | 653 { |
| 654 int length = 0; | |
| 655 _Bool bEvent = 0; | |
| 656 bit8_Type eventByte1, eventByte2; | |
| 657 bit8_Type profileByteFlag; | |
| 658 | |
| 659 eventByte1.uw = 0; | |
| 660 eventByte2.uw = 0; | |
| 661 uint8_t tempU8 = 0; | |
| 662 uint16_t temp = 0; | |
| 663 uint16_t bytesRead = 0; | |
| 664 | |
| 665 if(gasid) | |
| 666 *gasid = -1; | |
| 667 if(temperature) | |
| 668 *temperature = -1000; | |
| 669 if(sensor1) | |
| 670 *sensor1 = -1; | |
| 671 if(sensor2) | |
| 672 *sensor2 = -1; | |
| 673 if(sensor3) | |
| 674 *sensor3 = -1; | |
| 675 if(cns) | |
| 676 *cns = -1; | |
| 677 if(setpoint_cbar) | |
| 678 *setpoint_cbar = -1; | |
| 679 if(bailout) | |
| 680 *bailout = -1; | |
| 681 if(manualGas) | |
| 682 { | |
| 683 manualGas->percentageO2 =-1; | |
| 684 manualGas->percentageHe =-1; | |
| 685 } | |
| 686 if(decostopDepth) | |
| 687 *decostopDepth = -1; | |
| 688 | |
| 689 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); | |
| 690 if(depth) | |
| 691 *depth = (int32_t)temp; | |
| 692 bytesRead += 2; | |
| 693 | |
| 694 ext_flash_read_next_sample_part( &profileByteFlag.uw, 1); | |
| 695 bytesRead ++; | |
| 696 | |
| 697 bEvent = profileByteFlag.ub.bit7; | |
| 698 profileByteFlag.ub.bit7 = 0; | |
| 699 length = profileByteFlag.uw; | |
| 700 | |
| 701 if(bEvent) | |
| 702 { | |
| 703 ext_flash_read_next_sample_part( &eventByte1.uw, 1); | |
| 704 bytesRead ++; | |
| 705 | |
| 706 length--; | |
| 707 | |
| 708 //second event byte | |
| 709 if(eventByte1.ub.bit7) | |
| 710 { | |
| 711 ext_flash_read_next_sample_part( &eventByte2.uw, 1); | |
| 712 bytesRead ++; | |
| 713 length--; | |
| 714 } | |
| 715 else | |
| 716 { | |
| 717 eventByte2.uw = 0; | |
| 718 } | |
| 719 | |
| 720 //manual Gas Set | |
| 721 if( eventByte1.ub.bit4) | |
| 722 { | |
| 723 //Evaluate manual Gas | |
| 724 ext_flash_read_next_sample_part( (uint8_t*)&tempU8, 1); | |
| 725 bytesRead +=1; | |
| 726 length -= 1; | |
| 727 manualGas->percentageO2 = tempU8; | |
| 728 ext_flash_read_next_sample_part( (uint8_t*)&tempU8, 1); | |
| 729 bytesRead +=1; | |
| 730 length -= 1; | |
| 731 manualGas->percentageHe = tempU8; | |
| 732 if(gasid) | |
| 733 *gasid = 0; | |
| 734 } | |
| 735 //gas change | |
| 736 if( eventByte1.ub.bit5) | |
| 737 { | |
| 738 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 739 bytesRead +=1; | |
| 740 length -= 1; | |
| 741 if(gasid) | |
| 742 *gasid = (uint16_t)tempU8; | |
| 743 } | |
| 744 //SetpointChange | |
| 745 if( eventByte1.ub.bit6) | |
| 746 { | |
| 747 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 748 *setpoint_cbar = tempU8; | |
| 749 bytesRead +=1; | |
| 750 length -= 1; | |
| 751 } | |
| 752 | |
| 753 // second event Byte | |
| 754 //bailout | |
|
298
50c26a4442af
Bugfix: fix drawing of CCR bailout profile
Jan Mulder <jlmulder@xs4all.nl>
parents:
283
diff
changeset
|
755 if(eventByte2.ub.bit0) |
| 38 | 756 { |
| 757 //evaluate bailout gas Gas | |
| 758 *bailout = 1; | |
| 759 | |
| 760 ext_flash_read_next_sample_part( (uint8_t*)&tempU8, 1); | |
| 761 bytesRead +=1; | |
| 762 length -= 1; | |
| 763 manualGas->percentageO2 = tempU8; | |
| 764 ext_flash_read_next_sample_part( (uint8_t*)&tempU8, 1); | |
| 765 bytesRead +=1; | |
| 766 length -= 1; | |
| 767 manualGas->percentageHe = tempU8; | |
| 768 | |
| 769 if(gasid) | |
| 770 *gasid = 0; | |
| 771 } | |
| 772 } | |
| 773 | |
| 774 if(divisor.temperature == 0) | |
| 775 { | |
| 776 divisor.temperature = smallHeader.tempDivisor - 1; | |
| 777 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); | |
| 778 bytesRead +=2; | |
| 779 length -= 2; | |
| 780 if(temperature) | |
| 781 { | |
| 782 *temperature = (int32_t)temp; | |
| 783 } | |
| 784 } | |
| 785 else | |
| 786 { | |
| 787 divisor.temperature--; | |
| 788 } | |
| 789 | |
| 790 if(smallHeader.deco_ndlDivisor > 0) | |
| 791 { | |
| 792 if(divisor.deco_ndl == 0) | |
| 793 { | |
| 794 divisor.deco_ndl = smallHeader.deco_ndlDivisor - 1; | |
| 795 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 796 if(decostopDepth) | |
| 797 { | |
| 798 *decostopDepth = tempU8 * 100; | |
| 799 } | |
| 800 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 801 bytesRead += 2; | |
| 802 length -= 2; | |
| 803 } | |
| 804 else | |
| 805 { | |
| 806 divisor.deco_ndl--; | |
| 807 } | |
| 808 } | |
| 809 | |
| 810 if(divisor.ppo2 == 0) | |
| 811 { | |
| 812 int32_t ppO2Tmp = 0; | |
| 813 divisor.ppo2 = smallHeader.ppo2Divisor -1; | |
| 814 for(int i = 0; i <3 ; i++) | |
| 815 { | |
| 816 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 817 ppO2Tmp += tempU8; | |
| 818 bytesRead +=1; | |
| 819 length -= 1; | |
| 820 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); | |
| 821 bytesRead +=2; | |
| 822 length -= 2; | |
| 823 if(sensor1 && (i==0)) | |
| 824 *sensor1 = (((int32_t)tempU8) * 0xFFFF) + temp; | |
| 825 if(sensor2 && (i==1)) | |
| 826 *sensor2 = (((int32_t)tempU8) * 0xFFFF) + temp; | |
| 827 if(sensor3 && (i==2)) | |
| 828 *sensor3 = (((int32_t)tempU8) * 0xFFFF) + temp; | |
| 829 } | |
| 830 } | |
| 831 else | |
| 832 { | |
| 833 divisor.ppo2--; | |
| 834 } | |
| 835 | |
| 836 if(smallHeader.decoplanDivisor > 0) | |
| 837 { | |
| 838 if(divisor.decoplan == 0) | |
| 839 { | |
| 840 divisor.decoplan = smallHeader.decoplanDivisor - 1; | |
| 841 for(int i = 0; i <15; i++) | |
| 842 ext_flash_read_next_sample_part( &tempU8, 1); | |
| 843 bytesRead += 15; | |
| 844 length -= 15; | |
| 845 } | |
| 846 else | |
| 847 { | |
| 848 divisor.decoplan--; | |
| 849 } | |
| 850 } | |
| 851 | |
| 852 | |
| 853 | |
| 854 if(divisor.cns == 0) | |
| 855 { | |
| 856 divisor.cns = smallHeader.cnsDivisor - 1; | |
| 857 | |
| 858 ext_flash_read_next_sample_part( (uint8_t*)&temp, 2); | |
| 859 bytesRead +=2; | |
| 860 length -= 2; | |
| 861 if(cns) | |
| 862 { | |
| 863 *cns = (int32_t)temp; | |
| 864 } | |
| 865 } | |
| 866 else | |
| 867 { | |
| 868 divisor.cns--; | |
| 869 } | |
| 870 | |
| 871 if (length != 0) | |
| 872 return 0; | |
| 873 | |
| 874 return bytesRead; | |
| 875 } | |
| 876 /** | |
| 877 ****************************************************************************** | |
| 878 * @brief logbook_readSampleData. / Reads sample data of whole logbook entry | |
| 281 | 879 * @author heinrichs weikamp |
| 38 | 880 * @version V0.0.1 |
| 881 * @date 22-April-2014 | |
| 882 ****************************************************************************** | |
| 883 * | |
| 884 * @param uint8_t StepBackwards: witch lookbook entry? | |
| 885 * @param uint16_t length : maxlength of output arrays | |
| 886 * @param int32_t* depth : output array | |
| 887 * @param int16_t * gasid : output array | |
| 888 * @param int32_t* temperature : output array | |
| 889 * @param int32_t* ppo2 : output array | |
| 890 * @param int32_t* cns : output array | |
| 891 * @return length of output | |
| 892 */ | |
| 893 uint16_t logbook_readSampleData(uint8_t StepBackwards, uint16_t length,uint16_t* depth, uint8_t* gasid, int16_t* temperature, uint16_t* ppo2, uint16_t* setpoint, uint16_t* sensor1, uint16_t* sensor2, uint16_t* sensor3, uint16_t* cns, uint8_t* bailout, uint16_t* decostopDepth) | |
| 894 { | |
| 895 //Test read | |
| 896 //SLogbookHeader header; | |
| 897 | |
| 898 //logbook_getHeader(&header); | |
| 899 SLogbookHeader header; | |
| 900 int iNum; | |
| 901 int firstgasid = 0; | |
| 902 int retVal = 0; | |
| 903 int compression = 0; | |
| 904 int i; | |
| 905 // uint32_t diveTime_seconds; | |
| 906 int32_t depthVal = 0; | |
| 907 int16_t gasidVal = 0; | |
| 908 int16_t setPointVal = 0; | |
| 909 int16_t bailoutVal = 0; | |
| 910 int16_t bailoutLast = 0; | |
| 911 uint16_t setPointLast = 0; | |
| 912 int32_t temperatureVal = 0; | |
| 913 int32_t sensor1Val = 0; | |
| 914 int32_t sensor2Val = 0; | |
| 915 int32_t sensor3Val = 0; | |
| 916 int32_t sensor1Last = 0; | |
| 917 int32_t sensor2Last = 0; | |
| 918 int32_t sensor3Last = 0; | |
| 919 int32_t cnsVal = 0; | |
| 920 int32_t depthLast = 0; | |
| 921 int16_t gasidLast = 0; | |
| 922 int32_t temperatureLast = 0; | |
| 923 int32_t temperatureFirst = 0; | |
| 924 int32_t cnsLast = 0; | |
| 925 int16_t decostepDepthVal = 0; | |
| 926 int16_t decostepDepthLast = 0; | |
| 927 | |
| 928 SManualGas manualGasVal; | |
| 929 SManualGas manualGasLast; | |
| 930 manualGasLast.percentageO2 = 0; | |
| 931 manualGasLast.percentageHe = 0; | |
| 932 | |
| 933 float ambiant_pressure_bar = 0; | |
| 934 float ppO2 = 0; | |
| 935 ext_flash_read_dive_header((uint8_t*)&header, StepBackwards); | |
| 936 for(i = 0;i< 5;i++) | |
| 937 { | |
| 938 if(header.gasordil[i].note.ub.first) | |
| 939 break; | |
| 940 } | |
| 941 firstgasid = i + 1; | |
| 942 if(header.diveMode == DIVEMODE_CCR) | |
| 943 setPointLast = header.setpoint[0].setpoint_cbar; | |
| 944 else | |
| 945 setPointLast = 0; | |
| 946 //diveTime_seconds = header.diveTime_seconds ; | |
| 947 for(compression = 1; compression < 100; compression ++) | |
| 948 { | |
| 949 if((header.total_diveTime_seconds / header.samplingRate)/compression <= length) | |
| 950 break; | |
| 951 } | |
| 952 | |
| 953 | |
| 954 for(i = 0;i< length;i++) | |
| 955 { | |
| 956 if(depth) | |
| 957 depth[i] = 0; | |
| 958 if(temperature) | |
| 959 temperature[i] = 0; | |
| 960 if(gasid) | |
| 961 gasid[i] = 0; | |
| 962 if(ppo2) | |
| 963 ppo2[i] = 0; | |
| 964 if(setpoint) | |
| 965 setpoint[i] = 0; | |
| 966 if(sensor1) | |
| 967 sensor1[i] = 0; | |
| 968 if(sensor2) | |
| 969 sensor2[i] = 0; | |
| 970 if(sensor3) | |
| 971 sensor3[i] = 0; | |
| 972 if(cns) | |
| 973 cns[i] = 0; | |
| 974 } | |
| 975 //We start with fist gasid | |
| 976 gasidLast = firstgasid; | |
| 977 | |
| 978 | |
| 979 //uint16_t* ppo2, uint16_t* cns# | |
| 980 uint32_t totalNumberOfBytes = 0; | |
| 981 uint32_t bytesRead = 0; | |
| 982 ext_flash_open_read_sample( StepBackwards,&totalNumberOfBytes); | |
| 983 ext_flash_read_next_sample_part((uint8_t*)&smallHeader, sizeof(SSmallHeader)); | |
| 984 bytesRead += sizeof(SSmallHeader); | |
| 985 | |
| 986 clear_divisor(); | |
| 987 | |
| 988 iNum = 0; | |
| 989 int counter = 0; | |
| 990 temperatureLast = -1000; | |
| 991 while ((bytesRead < totalNumberOfBytes) && (iNum < length)) | |
| 992 { | |
| 993 ext_flash_set_entry_point(); | |
| 994 divisorBackup = divisor; | |
| 995 retVal = readSample(&depthVal,&gasidVal, &setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, &decostepDepthVal); | |
| 996 | |
| 997 if(retVal == 0) | |
| 998 { | |
| 999 //Error try to read again!!! | |
| 1000 ext_flash_reopen_read_sample_at_entry_point(); | |
| 1001 divisor = divisorBackup; | |
| 1002 retVal = readSample(&depthVal,&gasidVal,&setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, &decostepDepthVal); | |
| 1003 | |
| 1004 if(retVal == 0) | |
| 1005 break; | |
| 1006 } | |
| 1007 bytesRead +=retVal; | |
| 1008 | |
| 1009 //if for some variable no new value is in the sample for (z.B. gasidVal = -1), we take the last value | |
| 1010 if(depthVal == -1) | |
| 1011 depthVal = depthLast; | |
| 1012 else | |
| 1013 depthLast = depthVal; | |
| 1014 | |
| 1015 if(gasidVal == -1) | |
| 1016 gasidVal = gasidLast; | |
| 1017 else | |
| 1018 gasidLast = gasidVal; | |
| 1019 | |
| 1020 if(temperatureVal == -1000) | |
| 1021 temperatureVal = temperatureLast; | |
| 1022 else | |
| 1023 { | |
| 1024 if(temperatureLast == -1000) | |
| 1025 temperatureFirst = temperatureVal; | |
| 1026 temperatureLast = temperatureVal; | |
| 1027 } | |
| 1028 | |
| 1029 if(setPointVal == -1) | |
| 1030 setPointVal = setPointLast; | |
| 1031 else | |
| 1032 setPointLast = setPointVal; | |
| 1033 | |
| 1034 if(sensor1Val == -1) | |
| 1035 sensor1Val = sensor1Last; | |
| 1036 else | |
| 1037 sensor1Last = sensor1Val; | |
| 1038 | |
| 1039 if(sensor2Val == -1) | |
| 1040 sensor2Val = sensor2Last; | |
| 1041 else | |
| 1042 sensor2Last = sensor2Val; | |
| 1043 | |
| 1044 if(sensor3Val == -1) | |
| 1045 sensor3Val = sensor3Last; | |
| 1046 else | |
| 1047 sensor3Last = sensor3Val; | |
| 1048 | |
| 1049 if(cnsVal == -1) | |
| 1050 cnsVal = cnsLast; | |
| 1051 else | |
| 1052 cnsLast = cnsVal; | |
| 1053 | |
| 1054 if(manualGasVal.percentageO2 == -1) | |
| 1055 manualGasVal = manualGasLast; | |
| 1056 else | |
| 1057 manualGasLast = manualGasVal; | |
| 1058 | |
| 1059 if(bailoutVal == -1) | |
| 1060 bailoutVal = bailoutLast; | |
| 1061 else | |
| 1062 bailoutLast = bailoutVal; | |
| 1063 | |
| 1064 if(decostepDepthVal == -1) | |
| 1065 decostepDepthVal = decostepDepthLast; | |
| 1066 else | |
| 1067 decostepDepthLast = decostepDepthVal; | |
| 1068 | |
| 1069 counter++; | |
| 1070 // Heed compression | |
| 1071 // Write here to arrays | |
| 1072 if(counter == compression) | |
| 1073 { | |
| 1074 if(depth) | |
| 1075 depth[iNum] = depthVal; | |
| 1076 if(gasid) | |
| 1077 gasid[iNum] = gasidVal; | |
| 1078 if(temperature) | |
| 1079 temperature[iNum] = temperatureVal; | |
| 1080 if(cns) | |
| 1081 cns[iNum] = cnsVal; | |
| 1082 if(bailout) | |
| 1083 bailout[iNum] = bailoutVal; | |
| 1084 if(decostopDepth) | |
| 1085 decostopDepth[iNum] = decostepDepthVal; | |
| 1086 | |
| 1087 if(ppo2) | |
| 1088 { | |
| 1089 //Calc ppo2 - Values | |
| 1090 SGas gas; | |
| 1091 gas.setPoint_cbar = setPointVal; | |
| 1092 if(gasidVal > 0) | |
| 1093 { | |
| 1094 gas.helium_percentage = header.gasordil[gasidVal - 1].helium_percentage; | |
| 1095 gas.nitrogen_percentage = 100 - gas.helium_percentage - header.gasordil[gasidVal - 1].oxygen_percentage; | |
| 1096 } | |
| 1097 else | |
| 1098 { | |
| 1099 gas.helium_percentage = manualGasVal.percentageHe; | |
| 1100 gas.nitrogen_percentage = 100 - gas.helium_percentage - manualGasVal.percentageO2; | |
| 1101 } | |
| 1102 ambiant_pressure_bar =((float)(depthVal + header.surfacePressure_mbar))/1000; | |
| 1103 ppO2 = decom_calc_ppO2(ambiant_pressure_bar, &gas ); | |
| 1104 ppo2[iNum] = (uint16_t) ( ppO2 * 100); | |
| 1105 } | |
| 1106 | |
| 1107 if(setpoint) | |
| 1108 setpoint[iNum] = setPointVal; | |
| 1109 | |
| 1110 if(sensor1) | |
| 1111 sensor1[iNum] = (sensor1Val / 0xFFFF) & 0xFF; | |
| 1112 if(sensor2) | |
| 1113 sensor2[iNum] = (sensor2Val / 0xFFFF) & 0xFF; | |
| 1114 if(sensor3) | |
| 1115 sensor3[iNum] = (sensor3Val / 0xFFFF) & 0xFF; | |
| 1116 iNum++; | |
| 1117 counter = 0; | |
| 1118 } | |
| 1119 } | |
| 1120 | |
| 1121 // Fix first Temperature Entries 150930 hw | |
| 1122 if(temperature) | |
| 1123 { | |
| 1124 int i = 0; | |
| 1125 while((temperature[i] == -1000) && (i < iNum)) | |
| 1126 temperature[i++] = temperatureFirst; | |
| 1127 } | |
| 1128 | |
| 1129 ext_flash_close_read_sample(); | |
| 1130 return iNum; | |
| 1131 } | |
| 1132 | |
| 1133 | |
| 1134 /******************************************************************************** | |
| 1135 * @brief logbook_InitAndWrite. / Controls writing of logbook | |
| 1136 * Should be called ten times per second | |
| 1137 * Automatically Initializes logbook at beginning of dive, | |
| 1138 * write samples every 2 seconds | |
| 1139 * and finishes logbook after end of dive | |
| 1140 *********************************************************************************/ | |
| 1141 | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1142 void logbook_InitAndWrite(const SDiveState *pStateReal) |
| 38 | 1143 { |
| 1144 SSettings *pSettings = settingsGetPointer(); | |
| 1145 static uint8_t bDiveMode = 0; | |
| 1146 static uint32_t tickstart = 0; | |
| 1147 uint32_t ticksdiff = 0; | |
| 1148 uint32_t lasttick = 0; | |
| 1149 static float min_temperature_float_celsius = 0; | |
| 1150 | |
| 1151 if(!bDiveMode) | |
| 1152 { | |
| 1153 if((pStateReal->mode == MODE_DIVE) && (pStateReal->diveSettings.diveMode != DIVEMODE_Apnea) && (pStateReal->lifeData.dive_time_seconds >= 5)) | |
| 1154 { | |
| 1155 //InitdiveProfile | |
| 1156 pSettings->totalDiveCounter++; | |
| 1157 logbook_initNewdiveProfile(pStateReal,settingsGetPointer()); | |
| 1158 min_temperature_float_celsius = pStateReal->lifeData.temperature_celsius; | |
| 1159 //Write logbook sample | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1160 logbook_writeSample(pStateReal); |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1161 resetEvents(pStateReal); |
| 38 | 1162 tickstart = HAL_GetTick(); |
| 1163 bDiveMode = 1; | |
| 1164 } | |
| 1165 } | |
| 1166 else if((pStateReal->mode == MODE_DIVE) && (pStateReal->diveSettings.diveMode != DIVEMODE_Apnea)) | |
| 1167 { | |
| 1168 lasttick = HAL_GetTick(); | |
| 1169 ticksdiff = time_elapsed_ms(tickstart,lasttick); | |
| 1170 // | |
| 1171 if(ticksdiff >= 2000) | |
| 1172 { | |
| 1173 //Write logbook sample | |
|
269
6e78137952af
cleanup: do not pass large struct by value
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
1174 logbook_writeSample(pStateReal); |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1175 resetEvents(pStateReal); |
| 38 | 1176 if(min_temperature_float_celsius > pStateReal->lifeData.temperature_celsius) |
| 1177 min_temperature_float_celsius = pStateReal->lifeData.temperature_celsius; | |
| 1178 tickstart = lasttick; | |
| 1179 if((bDiveMode == 1) && (pStateReal->lifeData.dive_time_seconds >= pSettings->divetimeToCreateLogbook)) | |
| 1180 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1181 ext_flash_create_new_dive_log((uint8_t*)&gheader); |
| 38 | 1182 /** save settings |
| 1183 * with new lastDiveLogId and time and day | |
| 1184 */ | |
| 1185 pSettings->personalDiveCount++; | |
| 1186 if(pSettings->logbookOffset) | |
| 1187 { | |
| 1188 pSettings->logbookOffset++; | |
| 1189 } | |
| 427 | 1190 ext_flash_write_settings(0); |
| 38 | 1191 ext_flash_disable_protection_for_logbook(); |
|
426
514e6269256f
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
411
diff
changeset
|
1192 |
|
514e6269256f
Added function to analyse the sampel ringbuffer:
ideenmodellierer
parents:
411
diff
changeset
|
1193 ext_flash_CloseSector(); /* this is just a repair function which invalidates a not used sector in case a log maintenance was called before dive */ |
| 38 | 1194 bDiveMode = 3; |
| 1195 } | |
| 1196 if(bDiveMode == 3) | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1197 logbook_UpdateHeader(pStateReal); |
| 38 | 1198 } |
| 1199 } | |
| 1200 else if(bDiveMode == 3) | |
| 1201 { | |
| 1202 //End of Dive | |
| 1203 logbook_SetAverageDepth(pStateReal->lifeData.average_depth_meter); | |
| 1204 logbook_SetMinTemperature(min_temperature_float_celsius); | |
| 1205 logbook_SetMaxCNS(pStateReal->lifeData.cns); | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1206 logbook_SetCompartmentDesaturation(pStateReal); |
| 38 | 1207 logbook_SetLastStop(pStateReal->diveSettings.last_stop_depth_bar); |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1208 gheader.batteryVoltage = pStateReal->lifeData.battery_voltage * 1000; |
| 38 | 1209 logbook_EndDive(); |
| 1210 bDiveMode = 0; | |
| 1211 } else | |
| 1212 { | |
| 1213 ext_flash_enable_protection(); | |
| 1214 } | |
| 1215 } | |
| 1216 | |
| 1217 | |
| 1218 /* Private functions ---------------------------------------------------------*/ | |
| 1219 | |
| 1220 /******************************************************************************** | |
| 1221 * @brief logbook_UpdateHeader. / | |
| 1222 * set date, time, max depth. etc. pp. | |
| 1223 * the internal pointer to the end of profile and length will be set by | |
| 1224 ext_flash_close_new_dive_log() in externLogbookFlash.c | |
| 1225 * @author heinrichs weikamp gmbh | |
| 1226 * @version V0.0.1 | |
| 1227 * @date 27-Nov-2014 | |
| 1228 *********************************************************************************/ | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1229 static void logbook_UpdateHeader(const SDiveState *pStateReal) |
| 38 | 1230 { |
| 1231 // uint16_t secondsAtShallow = 0; | |
| 1232 RTC_DateTypeDef Sdate; | |
| 1233 RTC_TimeTypeDef Stime; | |
| 1234 uint32_t time1_u32, time2_u32; | |
| 1235 uint32_t divetimeHelper; | |
| 1236 | |
| 1237 /* time and day */ | |
| 1238 /* don't update CHANGE 160224 hw, maybe save actual time and date at other place | |
| 1239 translateDate(pStateReal->lifeData.dateBinaryFormat, &Sdate); | |
| 1240 translateTime(pStateReal->lifeData.timeBinaryFormat, &Stime); | |
| 1241 | |
| 1242 header.dateYear = Sdate.Year; | |
| 1243 header.dateMonth = Sdate.Month; | |
| 1244 header.dateDay = Sdate.Date; | |
| 1245 header.timeHour = Stime.Hours; | |
| 1246 header.timeMinute = Stime.Minutes; | |
| 1247 */ | |
| 1248 /// 160315 Quick fix for empty date problem | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1249 if((!(gheader.dateYear)) || (!(gheader.dateMonth)) || (!(gheader.dateDay))) |
| 38 | 1250 { |
| 1251 translateDate(pStateReal->lifeData.dateBinaryFormat, &Sdate); | |
| 1252 translateTime(pStateReal->lifeData.timeBinaryFormat, &Stime); | |
| 1253 | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1254 gheader.dateYear = Sdate.Year; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1255 gheader.dateMonth = Sdate.Month; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1256 gheader.dateDay = Sdate.Date; |
| 38 | 1257 |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1258 time1_u32 = (uint32_t)gheader.timeMinute + (uint32_t)(gheader.timeHour * 60); |
| 38 | 1259 time2_u32 = (uint32_t)Stime.Minutes + (uint32_t)(Stime.Hours * 60); |
| 1260 if(time2_u32 < time1_u32) | |
| 1261 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1262 if(gheader.dateDay > 1) |
| 38 | 1263 { |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1264 gheader.dateDay -= 1; |
| 38 | 1265 } |
| 1266 else | |
| 1267 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1268 gheader.dateMonth --; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1269 if(!gheader.dateMonth) |
| 38 | 1270 { |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1271 gheader.dateYear--; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1272 gheader.dateMonth = 12; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1273 gheader.dateDay = 31; |
| 38 | 1274 } |
| 1275 else | |
| 1276 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1277 if(gheader.dateMonth == 2) |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1278 gheader.dateDay = 28; |
| 38 | 1279 else |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1280 if((gheader.dateMonth == 4) || (gheader.dateMonth == 6) || (gheader.dateMonth == 9) || (gheader.dateMonth == 11)) |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1281 gheader.dateDay = 30; |
| 38 | 1282 else |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1283 gheader.dateDay = 31; |
| 38 | 1284 } |
| 1285 } | |
| 1286 } | |
| 1287 } | |
| 1288 | |
| 1289 /* duration */ | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1290 gheader.total_diveTime_seconds = pStateReal->lifeData.dive_time_seconds; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1291 gheader.maxDepth = pStateReal->lifeData.max_depth_meter * 100; |
| 38 | 1292 |
| 1293 /* old: | |
| 1294 | |
| 1295 secondsAtShallow = pSettings->timeoutDiveReachedZeroDepth; | |
| 1296 if(pStateReal->lifeData.dive_time_seconds <= secondsAtShallow) | |
| 1297 secondsAtShallow = 0; | |
| 1298 header.diveTimeMinutes = (header.total_diveTime_seconds - secondsAtShallow )/ 60; | |
| 1299 header.diveTimeSeconds = header.total_diveTime_seconds - secondsAtShallow - (header.diveTimeMinutes * 60); | |
| 1300 */ | |
| 1301 divetimeHelper = pStateReal->lifeData.dive_time_seconds_without_surface_time; | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1302 gheader.diveTimeMinutes = (uint16_t)(divetimeHelper/60); |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1303 divetimeHelper -= 60 * (uint32_t)gheader.diveTimeMinutes; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1304 gheader.diveTimeSeconds = (uint16_t)divetimeHelper; |
| 38 | 1305 |
| 1306 /* deco algorithm (final) */ | |
| 1307 if(pStateReal->diveSettings.deco_type.ub.standard == GF_MODE) | |
| 1308 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1309 gheader.decoModel = 1; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1310 gheader.gfLow_or_Vpm_conservatism = pStateReal->diveSettings.gf_low; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1311 gheader.gfHigh = pStateReal->diveSettings.gf_high; |
| 38 | 1312 } |
| 1313 else | |
| 1314 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1315 gheader.decoModel = 2; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1316 gheader.gfLow_or_Vpm_conservatism = pStateReal->diveSettings.vpm_conservatism; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1317 gheader.gfHigh = 0; |
| 38 | 1318 } |
| 1319 | |
| 1320 /* tissue load */ | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1321 memcpy(gheader.n2Compartments, pStateReal->lifeData.tissue_nitrogen_bar, 64); |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1322 memcpy(gheader.heCompartments, pStateReal->lifeData.tissue_helium_bar, 64); |
| 38 | 1323 |
| 1324 } | |
| 1325 | |
| 1326 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
1327 static void logbook_SetAverageDepth(float average_depth_meter) |
| 38 | 1328 { |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1329 gheader.averageDepth_mbar = (uint16_t)(average_depth_meter * 100); |
| 38 | 1330 } |
| 1331 | |
| 1332 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
1333 static void logbook_SetMinTemperature(float min_temperature_celsius) |
| 38 | 1334 { |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1335 gheader.minTemp = (int16_t)((min_temperature_celsius * 10.0f) + 0.5f); |
| 38 | 1336 } |
| 1337 | |
| 1338 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
1339 static void logbook_SetMaxCNS(float max_cns_percentage) |
| 38 | 1340 { |
| 1341 if(max_cns_percentage < 9999) | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1342 gheader.maxCNS = (uint16_t)(max_cns_percentage); |
| 38 | 1343 else |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1344 gheader.maxCNS = 9999; |
| 38 | 1345 } |
| 1346 | |
| 1347 | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
269
diff
changeset
|
1348 static void logbook_SetCompartmentDesaturation(const SDiveState * pStateReal) |
| 38 | 1349 { |
|
225
2bb1db22b5f5
cleanup: random set of cleanups
Jan Mulder <jlmulder@xs4all.nl>
parents:
199
diff
changeset
|
1350 SLifeData2 secondaryInformation = { 0 }; |
| 38 | 1351 |
| 1352 decom_tissues_desaturation_time(&pStateReal->lifeData, &secondaryInformation); | |
| 1353 for(int i=0;i<16;i++) | |
| 1354 { | |
| 1355 if(secondaryInformation.tissue_nitrogen_desaturation_time_minutes[i] <= (15 * 255)) | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1356 gheader.n2CompartDesatTime_min[i] = (uint8_t)((secondaryInformation.tissue_nitrogen_desaturation_time_minutes[i] + 14) / 15); |
| 38 | 1357 else |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1358 gheader.n2CompartDesatTime_min[i] = 255; |
| 38 | 1359 if(secondaryInformation.tissue_helium_desaturation_time_minutes[i] <= (15 * 255)) |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1360 gheader.heCompartDesatTime_min[i] = (uint8_t)((secondaryInformation.tissue_helium_desaturation_time_minutes[i] + 14 )/ 15); |
| 38 | 1361 else |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1362 gheader.heCompartDesatTime_min[i] = 255; |
| 38 | 1363 } |
| 1364 } | |
| 1365 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
1366 static void logbook_SetLastStop(float last_stop_depth_bar) |
| 38 | 1367 { |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1368 gheader.lastDecostop_m = (uint8_t)(last_stop_depth_bar / 10.0f); |
| 38 | 1369 } |
| 1370 | |
|
194
f23b9055436f
cleanup: more trivial cleanup (logbook.c/h)
Jan Mulder <jlmulder@xs4all.nl>
parents:
149
diff
changeset
|
1371 static void logbook_writedata(void * data, int length_byte) |
| 38 | 1372 { |
| 1373 ext_flash_write_sample(data, length_byte); | |
| 1374 } | |
| 1375 | |
| 1376 /******************************************************************************** | |
| 1377 * @brief logbook_build_ostc3header. / | |
| 1378 * @author heinrichs weikamp gmbh | |
| 1379 * @version V0.0.2 | |
| 1380 * @date 27-Nov-2014 | |
| 1381 *********************************************************************************/ | |
| 1382 SLogbookHeaderOSTC3 * logbook_build_ostc3header(SLogbookHeader* pHead) | |
| 1383 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1384 convert_Type data,data2; |
| 38 | 1385 |
| 1386 memcpy(headerOSTC3.diveHeaderStart, &pHead->diveHeaderStart, 2); | |
| 1387 memcpy(headerOSTC3.pBeginProfileData, &pHead->pBeginProfileData, 3); | |
| 1388 memcpy(headerOSTC3.pEndProfileData, &pHead->pEndProfileData, 3); | |
| 1389 | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1390 |
| 38 | 1391 data.u8bit.byteHigh = 0; |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1392 data.u8bit.byteLow = pHead->pBeginProfileData[0]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1393 data.u8bit.byteMidLow = pHead->pBeginProfileData[1]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1394 data.u8bit.byteMidHigh = pHead->pBeginProfileData[2]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1395 |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1396 data2.u8bit.byteHigh = 0; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1397 data2.u8bit.byteLow = pHead->pEndProfileData[0]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1398 data2.u8bit.byteMidLow = pHead->pEndProfileData[1]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1399 data2.u8bit.byteMidHigh = pHead->pEndProfileData[2]; |
| 38 | 1400 |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1401 /* check if sample address information are corrupted by address range. */ |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1402 /* TODO: Workaround. Better solution would be to check end of ring for 0xFF pattern */ |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1403 if((data.u32bit > data2.u32bit) && (data.u32bit < (SAMPLESTOP - 0x9000))) |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1404 { |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1405 data2.u32bit = data.u32bit + DEFAULT_SAMPLES; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1406 pHead->pEndProfileData[0] = data2.u8bit.byteLow; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1407 pHead->pEndProfileData[1] = data2.u8bit.byteMidLow; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1408 pHead->pEndProfileData[2] = data2.u8bit.byteMidHigh; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1409 data.u32bit = DEFAULT_SAMPLES; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1410 } |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1411 else |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1412 { |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1413 data.u8bit.byteHigh = 0; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1414 data.u8bit.byteLow = pHead->profileLength[0]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1415 data.u8bit.byteMidLow = pHead->profileLength[1]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1416 data.u8bit.byteMidHigh = pHead->profileLength[2]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1417 } |
| 38 | 1418 if(data.u32bit != 0xFFFFFF) |
| 1419 data.u32bit += 3; | |
| 1420 | |
| 1421 headerOSTC3.profileLength[0] = data.u8bit.byteLow; | |
| 1422 headerOSTC3.profileLength[1] = data.u8bit.byteMidLow; | |
| 1423 headerOSTC3.profileLength[2] = data.u8bit.byteMidHigh; | |
| 1424 | |
| 1425 memcpy(headerOSTC3.gasordil, pHead->gasordil, 20); | |
| 1426 | |
| 1427 if(pHead->logbookProfileVersion == LOGBOOK_VERSION) | |
| 1428 { | |
| 1429 headerOSTC3.logbookProfileVersion = LOGBOOK_VERSION_OSTC3; | |
| 1430 memcpy(headerOSTC3.personalDiveCount, &pHead->personalDiveCount, 2); | |
| 1431 headerOSTC3.safetyDistance_10cm = 0; | |
| 1432 | |
| 1433 for(int i=0;i<5;i++) | |
| 1434 { | |
| 1435 if(!pHead->gasordil[i].note.ub.active) | |
| 1436 headerOSTC3.gasordil[3 + (i*4)] = 0; | |
| 1437 else if(pHead->gasordil[i].note.ub.first) | |
| 1438 { | |
| 1439 /* depth = 0, note = 1 */ | |
| 1440 headerOSTC3.gasordil[2 + (i*4)] = 0; | |
| 1441 headerOSTC3.gasordil[3 + (i*4)] = 1; | |
| 1442 } | |
| 1443 else if( pHead->gasordil[i].depth_meter) | |
| 1444 { | |
| 1445 /* note = 3 */ | |
| 1446 headerOSTC3.gasordil[3 + (i*4)] = 3; | |
| 1447 } | |
| 1448 } | |
| 1449 } | |
| 1450 else | |
| 1451 { | |
| 1452 headerOSTC3.logbookProfileVersion = 0xFF; | |
| 1453 headerOSTC3.personalDiveCount[0] = 0xFF; | |
| 1454 headerOSTC3.personalDiveCount[1] = 0xFF; | |
| 1455 headerOSTC3.safetyDistance_10cm = 0xFF; | |
| 1456 } | |
| 1457 | |
| 1458 headerOSTC3.dateYear = pHead->dateYear; | |
| 1459 headerOSTC3.dateMonth = pHead->dateMonth; | |
| 1460 headerOSTC3.dateDay = pHead->dateDay; | |
| 1461 headerOSTC3.timeHour = pHead->timeHour; | |
| 1462 headerOSTC3.timeMinute = pHead->timeMinute; | |
| 1463 | |
| 1464 | |
| 1465 memcpy(headerOSTC3.maxDepth, &pHead->maxDepth, 2); | |
| 1466 memcpy(headerOSTC3.diveTimeMinutes, &pHead->diveTimeMinutes, 2); | |
| 1467 | |
| 1468 headerOSTC3.diveTimeSeconds = pHead->diveTimeSeconds; | |
| 1469 | |
| 1470 memcpy(headerOSTC3.minTemp, &pHead->minTemp, 2); | |
| 1471 memcpy(headerOSTC3.surfacePressure_mbar,&pHead->surfacePressure_mbar, 2); | |
| 1472 memcpy(headerOSTC3.desaturationTime, &pHead->desaturationTime, 2); | |
| 1473 | |
| 1474 headerOSTC3.firmwareVersionHigh = pHead->firmwareVersionHigh; | |
| 1475 headerOSTC3.firmwareVersionLow = pHead->firmwareVersionLow; | |
| 1476 | |
| 1477 memcpy(headerOSTC3.batteryVoltage, &pHead->batteryVoltage, 2); | |
| 1478 | |
| 1479 headerOSTC3.samplingRate = pHead->samplingRate; | |
| 1480 | |
| 1481 memcpy(headerOSTC3.cnsAtBeginning, &pHead->cnsAtBeginning, 2); | |
| 1482 | |
| 1483 headerOSTC3.gfAtBeginning = pHead->gfAtBeginning; | |
| 1484 headerOSTC3.gfAtEnd = pHead->gfAtEnd; | |
| 1485 | |
| 1486 memcpy(headerOSTC3.setpoint, pHead->setpoint, 10); | |
| 1487 | |
| 1488 headerOSTC3.salinity = pHead->salinity; | |
| 1489 | |
| 1490 memcpy(headerOSTC3.maxCNS, &pHead->maxCNS, 2); | |
| 1491 memcpy(headerOSTC3.averageDepth_mbar, &pHead->averageDepth_mbar, 2); | |
| 1492 memcpy(headerOSTC3.total_diveTime_seconds,&pHead->total_diveTime_seconds, 2); | |
| 1493 | |
| 1494 headerOSTC3.gfLow_or_Vpm_conservatism = pHead->gfLow_or_Vpm_conservatism; | |
| 1495 headerOSTC3.gfHigh = pHead->gfHigh; | |
| 1496 headerOSTC3.decoModel = pHead->decoModel; | |
| 1497 | |
| 1498 memcpy(headerOSTC3.diveNumber, &pHead->diveNumber, 2); | |
| 1499 | |
| 1500 headerOSTC3.diveMode = pHead->diveMode; | |
| 1501 headerOSTC3.CCRmode = pHead->CCRmode; | |
| 1502 | |
| 1503 memcpy(headerOSTC3.n2CompartDesatTime_min,pHead->n2CompartDesatTime_min, 16); | |
| 1504 memcpy(headerOSTC3.n2Compartments, pHead->n2Compartments, 64); | |
| 1505 memcpy(headerOSTC3.heCompartDesatTime_min,pHead->heCompartDesatTime_min, 16); | |
| 1506 memcpy(headerOSTC3.heCompartments, pHead->heCompartments, 64); | |
| 1507 | |
| 1508 headerOSTC3.lastDecostop_m = pHead->lastDecostop_m; | |
| 1509 | |
| 1510 memcpy(headerOSTC3.hwHudBattery_mV, &pHead->hwHudBattery_mV, 2); | |
| 1511 | |
| 1512 headerOSTC3.hwHudLastStatus = pHead->hwHudLastStatus; | |
| 1513 | |
| 1514 memcpy(headerOSTC3.batteryGaugeRegisters,&pHead->batteryGaugeRegisters, 6); | |
| 1515 | |
| 1516 | |
| 1517 memcpy(headerOSTC3.diveHeaderEnd, &pHead->diveHeaderEnd, 2); | |
| 1518 | |
| 1519 return &headerOSTC3; | |
| 1520 } | |
| 1521 | |
| 1522 | |
| 1523 /******************************************************************************** | |
| 1524 * @brief logbook_build_ostc3header_compact. / | |
| 1525 * @author heinrichs weikamp gmbh | |
| 1526 * @version V0.0.1 | |
| 1527 * @date 31-Juli-2015 | |
| 1528 *********************************************************************************/ | |
| 1529 SLogbookHeaderOSTC3compact * logbook_build_ostc3header_compact(SLogbookHeader* pHead) | |
| 1530 { | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1531 convert_Type data, data2; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1532 |
| 38 | 1533 |
| 1534 data.u8bit.byteHigh = 0; | |
|
411
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1535 data.u8bit.byteLow = pHead->pBeginProfileData[0]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1536 data.u8bit.byteMidLow = pHead->pBeginProfileData[1]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1537 data.u8bit.byteMidHigh = pHead->pBeginProfileData[2]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1538 |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1539 data2.u8bit.byteHigh = 0; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1540 data2.u8bit.byteLow = pHead->pEndProfileData[0]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1541 data2.u8bit.byteMidLow = pHead->pEndProfileData[1]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1542 data2.u8bit.byteMidHigh = pHead->pEndProfileData[2]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1543 |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1544 /* check if sample address information are corrupted by address range. */ |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1545 /* TODO: Workaround. Better solution would be to check end of ring for 0xFF pattern */ |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1546 if((data.u32bit > data2.u32bit) && (data.u32bit < (SAMPLESTOP - 0x9000))) |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1547 { |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1548 data2.u32bit = data.u32bit + DEFAULT_SAMPLES; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1549 pHead->pEndProfileData[0] = data2.u8bit.byteLow; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1550 pHead->pEndProfileData[1] = data2.u8bit.byteMidLow; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1551 pHead->pEndProfileData[2] = data2.u8bit.byteMidHigh; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1552 data.u32bit = DEFAULT_SAMPLES; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1553 } |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1554 else |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1555 { |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1556 data.u8bit.byteHigh = 0; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1557 data.u8bit.byteLow = pHead->profileLength[0]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1558 data.u8bit.byteMidLow = pHead->profileLength[1]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1559 data.u8bit.byteMidHigh = pHead->profileLength[2]; |
|
e908b894f107
Bugfix: Limit log length in case of corrupted sample storage:
ideenmodellierer
parents:
325
diff
changeset
|
1560 } |
| 38 | 1561 |
| 1562 if(data.u32bit != 0xFFFFFF) | |
| 1563 { | |
| 1564 data.u32bit += 3; | |
| 1565 | |
| 1566 headerOSTC3compact.profileLength[0] = data.u8bit.byteLow; | |
| 1567 headerOSTC3compact.profileLength[1] = data.u8bit.byteMidLow; | |
| 1568 headerOSTC3compact.profileLength[2] = data.u8bit.byteMidHigh; | |
| 1569 | |
| 1570 headerOSTC3compact.dateYear = pHead->dateYear; | |
| 1571 headerOSTC3compact.dateMonth = pHead->dateMonth; | |
| 1572 headerOSTC3compact.dateDay = pHead->dateDay; | |
| 1573 headerOSTC3compact.timeHour = pHead->timeHour; | |
| 1574 headerOSTC3compact.timeMinute = pHead->timeMinute; | |
| 1575 | |
| 1576 memcpy(headerOSTC3compact.maxDepth, &pHead->maxDepth, 2); | |
| 1577 memcpy(headerOSTC3compact.diveTimeMinutes, &pHead->diveTimeMinutes, 2); | |
| 1578 | |
| 1579 headerOSTC3compact.diveTimeSeconds = pHead->diveTimeSeconds; | |
| 1580 | |
| 1581 | |
| 1582 headerOSTC3compact.totalDiveNumberLow = pHead->diveNumber & 0xFF; | |
| 1583 headerOSTC3compact.totalDiveNumberHigh = (uint8_t)(pHead->diveNumber/256); | |
| 1584 headerOSTC3compact.profileVersion = 0x24; // Logbook-Profile version, 0x24 = date and time is start not end | |
| 1585 } | |
| 1586 else | |
| 1587 { | |
| 1588 memset(&headerOSTC3compact, 0xFF, sizeof(SLogbookHeaderOSTC3compact)); | |
| 1589 } | |
| 1590 return &headerOSTC3compact; | |
| 1591 } | |
| 1592 | |
| 1593 | |
| 1594 /** | |
| 1595 ****************************************************************************** | |
| 1596 * @brief logbook_readSampleData. / Reads sample data of whole logbook entry | |
| 281 | 1597 * @author heinrichs weikamp |
| 38 | 1598 * @version V0.0.1 |
| 1599 * @date 22-April-2014 | |
| 1600 ****************************************************************************** | |
| 1601 * | |
| 1602 * @param uint8_t StepBackwards: witch lookbook entry? | |
| 1603 * @param uint16_t length : maxlength of output arrays | |
| 1604 * @param int32_t* depth : output array | |
| 1605 * @param int16_t * gasid : output array | |
| 1606 * @param int32_t* temperature : output array | |
| 1607 * @param int32_t* ppo2 : output array | |
| 1608 * @param int32_t* cns : output array | |
| 1609 * @return length of output | |
| 1610 */ | |
| 1611 void logbook_recover_brokenlog(uint8_t headerId) | |
| 1612 { | |
| 1613 int16_t retVal; | |
| 1614 int32_t depthVal = 0; | |
| 1615 int16_t gasidVal = 0; | |
| 1616 int16_t setPointVal = 0; | |
| 1617 int16_t bailoutVal = 0; | |
| 1618 int32_t temperatureVal = 0; | |
| 1619 int32_t sensor1Val = 0; | |
| 1620 int32_t sensor2Val = 0; | |
| 1621 int32_t sensor3Val = 0; | |
| 1622 int32_t cnsVal = 0; | |
| 1623 SManualGas manualGasVal; | |
| 1624 | |
| 1625 //uint16_t* ppo2, uint16_t* cns# | |
| 1626 uint32_t bytesRead = 0; | |
| 1627 | |
| 1628 ext_flash_read_block_start(); | |
| 1629 ext_flash_read_next_sample_part((uint8_t*)&smallHeader, sizeof(SSmallHeader)); | |
| 1630 bytesRead += sizeof(SSmallHeader); | |
| 1631 | |
| 1632 clear_divisor(); | |
| 1633 | |
| 1634 | |
| 1635 int sampleCounter = 0; | |
| 1636 int maxdepth = 0; | |
| 1637 uint32_t avrdepth = 0; | |
| 1638 while (true) | |
| 1639 { | |
| 1640 | |
| 1641 ext_flash_set_entry_point(); | |
| 1642 divisorBackup = divisor; | |
| 1643 retVal = readSample(&depthVal,&gasidVal, &setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, NULL); | |
| 1644 if(retVal == 0) | |
| 1645 { | |
| 1646 //Error try to read again!!! | |
| 1647 ext_flash_reopen_read_sample_at_entry_point(); | |
| 1648 divisor = divisorBackup; | |
| 1649 retVal = readSample(&depthVal,&gasidVal, &setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, NULL); | |
| 1650 | |
| 1651 if(retVal == 0) | |
| 1652 { | |
| 1653 //Error try to read again!!! | |
| 1654 ext_flash_reopen_read_sample_at_entry_point(); | |
| 1655 divisor = divisorBackup; | |
| 1656 retVal = readSample(&depthVal,&gasidVal, &setPointVal, &temperatureVal, &sensor1Val, &sensor2Val, &sensor3Val, &cnsVal, &manualGasVal, &bailoutVal, NULL); | |
| 1657 | |
| 1658 if(retVal == 0) | |
| 1659 { | |
| 1660 ext_flash_reopen_read_sample_at_entry_point(); | |
| 1661 break; | |
| 1662 } | |
| 1663 | |
| 1664 } | |
| 1665 } | |
| 1666 if(depthVal > maxdepth) | |
| 1667 maxdepth = depthVal; | |
| 1668 avrdepth += depthVal; | |
| 1669 sampleCounter++; | |
| 1670 bytesRead +=retVal; | |
| 1671 } | |
| 1672 avrdepth/= sampleCounter; | |
| 1673 ext_flash_close_read_sample(); | |
| 1674 SLogbookHeader header; | |
| 1675 | |
| 1676 ext_flash_read_dive_header2((uint8_t*) &header, headerId, false); | |
| 1677 header.total_diveTime_seconds = sampleCounter * header.samplingRate; | |
| 1678 header.diveTimeMinutes = header.total_diveTime_seconds /60; | |
| 1679 header.diveTimeSeconds = header.total_diveTime_seconds - header.diveTimeMinutes * 60; | |
| 1680 header.maxDepth = maxdepth; | |
| 1681 header.averageDepth_mbar = avrdepth; | |
| 1682 SSettings * settings = settingsGetPointer(); | |
| 1683 settings->lastDiveLogId = headerId; | |
| 1684 ext_flash_close_new_dive_log((uint8_t *)&header); | |
| 1685 } | |
| 1686 | |
| 1687 /************************ (C) COPYRIGHT heinrichs weikamp *****END OF FILE****/ |