Mercurial > public > hwos_code
annotate src/hwos.inc @ 657:c2e97f94c55f default tip
bump to 10.93 / 3.32
| author | heinrichsweikamp |
|---|---|
| date | Tue, 27 Jan 2026 11:01:04 +0100 |
| parents | 8af5aefbcdaf |
| children |
| rev | line source |
|---|---|
| 0 | 1 ;============================================================================= |
| 2 ; | |
| 640 | 3 ; File hwos.inc * combined next generation V3.12.3 |
| 0 | 4 ; |
| 623 | 5 ; OSTC Platform Definitions |
| 0 | 6 ; |
| 654 | 7 ; Copyright (c) 2011, JD Gascuel, heinrichs weikamp gmbh, all right reserved. |
| 0 | 8 ;============================================================================= |
| 9 ; HISTORY | |
| 604 | 10 ; 2011-05-24 : [jDG] Cleanups from initial Matthias code |
| 0 | 11 ;============================================================================= |
| 12 | |
| 623 | 13 |
| 634 | 14 ; ---- Hardware Configuration |
| 643 | 15 LIST P=18F87K22 ; compiler settings, if changed change also: Configure -> SelectDevice in MPLAB |
| 623 | 16 #include "p18f87k22.inc" ; processor definitions |
| 17 #include "ports.inc" ; port map definitions | |
| 0 | 18 |
| 604 | 19 |
| 634 | 20 ; ---- Software Configuration |
| 623 | 21 #include "configuration.inc" ; OSTC hwOS configuration |
| 582 | 22 |
| 0 | 23 |
| 634 | 24 ;----------------------------------------------------------------------------- |
| 25 ; Settings, Limits, Thresholds, Encodings, etc. | |
| 26 ;----------------------------------------------------------------------------- | |
| 27 | |
| 28 ; ---- Language Codes | |
| 604 | 29 #DEFINE none 0 ; no language selected |
| 623 | 30 #DEFINE en 1 ; select English |
| 31 #DEFINE de 2 ; select German | |
| 32 #DEFINE fr 3 ; select French | |
| 33 #DEFINE it 4 ; select Italian | |
| 604 | 34 |
| 560 | 35 |
| 634 | 36 ; ---- Magic Cookie Definition |
| 631 | 37 #DEFINE comm_service_key 0xABCDEF ; simsalabim to establish comm service mode |
| 0 | 38 |
| 39 | |
| 634 | 40 ; ---- Scrolling Menu Support |
| 41 ;#DEFINE scrolling_menu_enabled ; disabled | |
| 42 | |
| 43 | |
| 44 ; ---- Logo Address Vectors | |
| 654 | 45 #DEFINE hw_logo_block 0x01E000 ; color image data for heinrichs weikamp gmbh logo |
| 634 | 46 #DEFINE comm_logo_1 0x01EEDE ; color image data for USB or BT logo |
| 47 #DEFINE comm_logo_2 0x01EA04 ; color image data for BT logo, "+" bootloader | |
| 656 | 48 #DEFINE comm_logo_3 0x01EE10 ; color image data for BT logo, dn bootloader |
| 604 | 49 |
| 50 | |
| 582 | 51 ;-----------------------------EEPROM DATA ------------------------------------ |
| 52 ; Automatic reset of all options when this is changed: | |
| 631 | 53 #DEFINE eeprom_opt_version .8 ; range: 16 bit |
| 54 #DEFINE eeprom_vault_version .1 ; range: 8 bit | |
| 0 | 55 ;----------------------------------------------------------------------------- |
| 56 | |
| 623 | 57 |
| 634 | 58 ; ---- PWM1 for LED dimming |
| 59 #DEFINE CCP1CON_VALUE b'00001100' | |
| 623 | 60 #DEFINE T2CON_ECO b'01111110' |
| 61 #DEFINE T2CON_NORMAL b'01111110' | |
| 62 #DEFINE T2CON_FASTEST b'01111110' | |
| 63 | |
| 64 | |
| 634 | 65 ; ---- CPU speeds |
| 623 | 66 #DEFINE coding_speed_eco .1 ; 1 MHz = eco speed |
| 67 #DEFINE coding_speed_normal .2 ; 16 MHz = normal speed | |
| 68 #DEFINE coding_speed_fastest .4 ; 64 MHz = fastest speed (32 MHz on OSTC Sport BLE) | |
| 69 | |
| 70 #DEFINE speed_is_eco cpu_speed_state,0 ; =1: CPU is running at eco speed | |
| 71 #DEFINE speed_is_normal cpu_speed_state,1 ; =1: CPU is running at normal speed | |
| 72 #DEFINE speed_is_fastest cpu_speed_state,2 ; =1: CPU is running at fastest speed | |
| 73 | |
| 643 | 74 ; ---- I2C speed |
| 75 #DEFINE i2c_speed_value 0x27 ;0x9C = 100kHz @ 64MHz Fosc, 0x27 = 100kHz @ 16MHz Fosc | |
| 604 | 76 |
| 634 | 77 ; ---- Divemode Custom View Indexes - Attention: these numbers need to be in line with the jump tables in customview.asm! |
| 657 | 78 #DEFINE index_blank .0 ; blank view |
| 604 | 79 #DEFINE index_avr_stopwatch .1 ; average depth and stopwatch |
| 80 #DEFINE index_compass_dm .2 ; compass | |
| 81 #DEFINE index_ppo2_sensors .3 ; ppO2 sensors | |
| 82 #DEFINE index_sensor_check .4 ; sensor check | |
| 83 #DEFINE index_pscr_info .5 ; pSCR data | |
| 84 #DEFINE index_pressures_SAC .6 ; tank pressure and SAC rate | |
| 657 | 85 #DEFINE index_gas_needs_ascent .7 ; gas needs for ascent / cave return |
| 631 | 86 #DEFINE index_cave_tts .8 ; cave mode TTS |
| 87 #DEFINE index_decoplan .9 ; deco plan | |
| 657 | 88 #DEFINE index_ceiling_GF_tissue .10 ; ceiling, current GF and tissues |
| 89 #DEFINE index_ceiling_GF_surfGF .11 ; ceiling, current GF and surface GF | |
| 90 #DEFINE index_CNS .12 ; CNS values | |
| 91 #DEFINE index_ppo2_ead_end_cns .13 ; ppO2, END/EAD and CNS or gas density | |
| 92 #DEFINE index_clock_batt_surfpress .14 ; clock, battery and surface pressure | |
| 93 #DEFINE index_gf_factors .15 ; GF factors | |
| 94 #DEFINE index_cave_waypoints .16 ; cave waypoints | |
| 95 #DEFINE index_cv_dm_max .16 ; highest index used in normal custom view rotation | |
| 28 | 96 |
| 623 | 97 |
| 634 | 98 ; ---- Timing for button hold-down flags |
| 631 | 99 #DEFINE TMR1H_VALUE_FIRST .255-.128 ; in steps of 7.8125 ms -> 1.00 s |
| 604 | 100 #DEFINE TMR1H_VALUE_CONT .255-.32 ; in steps of 7.8125 ms -> 0.25 s |
| 631 | 101 #DEFINE TMR1H_VALUE_CONT_DIVE .255-.64 ; in steps of 7.8125 ms -> 0.50 s |
| 0 | 102 |
| 623 | 103 |
| 634 | 104 ; ---- Font Sizes |
| 623 | 105 #DEFINE FT_TINY .0 ; aa_font16_block, full character set |
| 106 #DEFINE FT_SMALL .1 ; aa_font28_block, full character set | |
| 107 #DEFINE FT_STANDARD .2 ; aa_font34_block, full character set | |
| 108 #DEFINE FT_MEDIUM .3 ; aa_font48_block, only digits, /, ., :, ;, <, =, > and ? | |
| 109 #DEFINE FT_LARGE .4 ; aa_font90_block, only digits, / and . | |
| 110 #DEFINE FT_HUGE .5 ; aa_font92_block, only digits, / and . | |
| 111 | |
| 0 | 112 |
| 634 | 113 ; ---- External O2 Sensors |
| 628 | 114 #DEFINE min_mv .70 ; = 7 mV |
| 604 | 115 #DEFINE max_mv .2500 ; = 250 mV |
| 634 | 116 #DEFINE ignore_mv_above .3500 ; = 350 mV (to suppress ghost readings on long open cables) |
| 650 | 117 #DEFINE ignore_mv_below .19 ; = 1.9 mv (to suppress noise readings on open cables) |
| 0 | 118 |
| 623 | 119 |
| 634 | 120 ; ---- Profile Recording Parameters |
| 121 #DEFINE logbook_profile_version 0x40+0x24 ; logbook recording format: internal (2 bit) + external (6 bit) | |
| 582 | 122 #DEFINE samplingrate_apnoe .1 ; [seconds] |
| 560 | 123 |
| 623 | 124 |
| 634 | 125 ; ---- Profile Recording Rates - Attention: all Divisors must be < 16 ! |
| 604 | 126 #DEFINE div_temperature .6 ; x sampling rate [s] |
| 127 #DEFINE div_deco .6 ; x sampling rate [s] | |
| 128 #DEFINE div_gf .12 ; x sampling rate [s] | |
| 129 #DEFINE div_ppo2_sensors .2 ; x sampling rate [s] | |
| 130 #DEFINE div_decoplan .12 ; x sampling rate [s] | |
| 131 #DEFINE div_cns .12 ; x sampling rate [s] | |
| 628 | 132 #DEFINE div_tank .12 ; x sampling rate [s] |
| 560 | 133 |
| 623 | 134 |
| 634 | 135 ; ---- Profile Recording Data - Attention: Information Lengths must be < 16 ! |
| 582 | 136 #DEFINE infolength_temperature .2 ; [byte] |
| 137 #DEFINE infolength_deco .2 ; [byte] | |
| 138 #DEFINE infolength_gf .1 ; [byte] | |
| 139 #DEFINE infolength_ppo2_sensors .9 ; [byte] | |
| 140 #DEFINE infolength_decoplan .15 ; [byte] | |
| 141 #DEFINE infolength_cns .2 ; [byte] | |
| 628 | 142 #DEFINE infolength_tank .2 ; [byte] |
| 0 | 143 |
| 623 | 144 |
| 634 | 145 ; ---- RX Functions |
| 628 | 146 #DEFINE rx_packet_overdue_timeout .120 ; [seconds] timeout for pressure measurements becomming declared as outdated (max. 255) |
| 604 | 147 #DEFINE max_pres_diff_min .5 ; [bar] minimum selectable pressure difference for ind.double mode |
| 148 #DEFINE max_pres_diff_max .50 ; [bar] maximum selectable pressure difference for ind.double mode | |
| 0 | 149 |
| 623 | 150 IFDEF _ccr_pscr |
| 151 #DEFINE tr_pres_options .15 ; number of options for pressure measurement source / with diluents | |
| 152 ELSE | |
| 153 #DEFINE tr_pres_options .6 ; number of options for pressure measurement source / OC gases only | |
| 154 ENDIF | |
| 155 | |
| 631 | 156 |
| 634 | 157 ; ---- Cave Mode |
| 623 | 158 IFDEF _cave_mode |
| 631 | 159 #DEFINE backtrack_waypoint_max .30 ; highest user-available waypoint number (max allowed: 30) |
| 160 #DEFINE backtrack_almost_full_threshold .240 ; backtrack index position at which the almost full flag will be set | |
| 161 #DEFINE backtrack_entire_full_threshold .250 ; backtrack index position at which the entirely full flag will be set | |
| 623 | 162 ENDIF |
| 163 | |
| 164 | |
| 634 | 165 ; ---- Gas Needs Settings |
| 604 | 166 #DEFINE min_tank_size .1 ; [liter] |
| 167 #DEFINE max_tank_size .40 ; [liter] | |
| 168 #DEFINE min_fill_press .5 ; [0 bar] value is in multiples of 10 bar | |
| 169 #DEFINE max_fill_press .29 ; [0 bar] value is in multiples of 10 bar, no 300 bar due to too far beyond ideal gas laws | |
| 170 | |
| 171 | |
| 634 | 172 ; ---- Timeouts for Menus / Surface Mode |
| 631 | 173 #DEFINE surfmode_timeout_default .240 ; [s] default timeout for surface mode and surface menus |
| 174 #DEFINE surfmode_timeout_aa_15v .90 ; [s] timeout for surface mode and surface menus when on 1.5V battery | |
| 175 #DEFINE surfmode_timeout_simulator .240 ; [s] special timeout for simulator mode | |
| 634 | 176 |
| 604 | 177 |
| 634 | 178 ; ---- Timeouts for Menus / Dive Mode |
| 623 | 179 #DEFINE divemode_timeout_premenu .10 ; [s] timeout for dive mode pre-menu |
| 180 #DEFINE divemode_timeout_mainmenu .30 ; [s] timeout for dive mode main menu | |
| 181 | |
| 182 | |
| 634 | 183 ; ---- RS232 Timeout |
| 184 #DEFINE rx_timeout .400 ; [ms] timeout for RS232 RX, needs to be multiple of 50 ms | |
| 631 | 185 |
| 186 | |
| 634 | 187 ; ---- End-of-Dive Timeouts |
| 631 | 188 #DEFINE simulator_timeout_normal .90 ; [min] timeout simulator mode |
| 640 | 189 #DEFINE simulator_timeout_cave .240 ; [min] timeout simulator mode (cave mode) |
| 190 #DEFINE apnoe_timeout .15 ; [min] timeout at surface in apnoe mode | |
| 191 #DEFINE simulator_timeout .15 ; [s] timeout at surface in simulator mode | |
| 192 #DEFINE divetime_less_1min_timeout .5 ; [s] timeout at surface for very short dives | |
| 631 | 193 |
| 194 | |
| 634 | 195 ; ---- other Timeouts |
| 631 | 196 #DEFINE deep_sleep_10mins .144 ; [x 10mins] (24h in this example) |
| 197 | |
| 582 | 198 |
| 634 | 199 ; ---- Surface Mode Thresholds and Limits |
| 623 | 200 #DEFINE high_altitude_threshold .880 ; [mbar] ambient pressure at which to switch into high altitude mode |
| 640 | 201 #DEFINE max_surfpressure .1060 ; [mbar] maximum value for internal surface pressure |
| 634 | 202 #DEFINE pressure_noise_threshold .10 ; [mbar] deltaP threshold for start of fast display updating |
| 203 #DEFINE pressure_noise_lag_time .6 ; [1/4 secs] lag time of display updating after deltaP < threshold again | |
| 560 | 204 |
| 205 | |
| 634 | 206 |
| 207 ; ---- Dive Mode Thresholds and Limits | |
| 623 | 208 #DEFINE wake_up_from_sleep .1160 ; [mbar] absolute pressure at which to switch from sleep mode to surface / dive mode |
| 209 #DEFINE dive_threshold_norm_alt_start .125 ; [mbar] relative pressure for normal altitude start-of-dive (equals depth in cm) | |
| 210 #DEFINE dive_threshold_norm_alt_end .75 ; [mbar] relative pressure for normal altitude end-of-dive (equals depth in cm) | |
| 211 #DEFINE dive_threshold_high_alt_start .325 ; [mbar] relative pressure for high altitude start-of-dive (equals depth in cm) | |
| 212 #DEFINE dive_threshold_high_alt_end .75 ; [mbar] relative pressure for high altitude end-of-dive (equals depth in cm) | |
| 213 #DEFINE ostc_depth_max .120 ; [m] maximum allowed operational depth for OSTC 2, 3, cR, TR, Plus & Sport | |
| 628 | 214 #DEFINE deco_region_distance .2 ; [m] distance below first stop for the deco region to begin |
| 192 | 215 |
| 582 | 216 |
| 634 | 217 ; ---- Dive Mode Margins |
| 623 | 218 #DEFINE ppO2_margin_on_max .300 ; [0.1 mbar] extra margin on ppO2 max values to compensate for surface pressures > 1000 hPa |
| 604 | 219 #DEFINE sensor_voting_logic_threshold .10 ; threshold in 0.01 bar |
| 0 | 220 |
| 623 | 221 |
| 634 | 222 ; ---- Gas and Dil types |
| 631 | 223 #DEFINE num_gas_types .4 ; Disabled, First, Normal, Deco |
| 224 #DEFINE num_dil_types .3 ; Disabled, First, Normal | |
| 225 | |
| 226 | |
| 634 | 227 ; ---- ppO2 Limits |
| 623 | 228 #DEFINE ppo2_warning_low_lowest .15 ; [cbar] minimum value for minimum ppO2 on OC |
| 229 #DEFINE ppo2_warning_low_default .17 ; [cbar] default value for minimum ppO2 on OC | |
| 230 #DEFINE ppo2_warning_low_highest .21 ; [cbar] maximum value for minimum ppO2 on OC | |
| 231 | |
| 232 #DEFINE ppo2_warning_loop_lowest .20 ; [cbar] minimum value for minimum ppO2 on loop | |
| 233 #DEFINE ppo2_warning_loop_default .40 ; [cbar] default value for minimum ppO2 on loop | |
| 234 #DEFINE ppo2_warning_loop_highest .60 ; [cbar] maximum value for minimum ppO2 on loop | |
| 235 | |
| 236 #DEFINE ppo2_warning_high_lowest .120 ; [cbar] minimum value for maximum ppO2 in none-deco phase | |
| 628 | 237 #DEFINE ppo2_warning_deco_lowest .120 ; [cbar] minimum value for maximum ppO2 in deco phase |
| 238 | |
| 623 | 239 #DEFINE ppo2_warning_high_default .140 ; [cbar] default value for maximum ppO2 in none-deco phase |
| 240 #DEFINE ppo2_warning_deco_default .160 ; [cbar] default value for maximum ppO2 in deco phase | |
| 628 | 241 |
| 242 IFDEF _high_ppO2_max | |
| 243 #DEFINE ppo2_warning_high_highest .200 ; [cbar] maximum value for maximum ppO2 in none-deco phase | |
| 244 #DEFINE ppo2_warning_deco_highest .200 ; [cbar] maximum value for maximum ppO2 in deco phase | |
| 245 ELSE | |
| 246 #DEFINE ppo2_warning_high_highest .160 ; [cbar] maximum value for maximum ppO2 in none-deco phase | |
| 623 | 247 #DEFINE ppo2_warning_deco_highest .160 ; [cbar] maximum value for maximum ppO2 in deco phase |
| 628 | 248 ENDIF |
| 623 | 249 |
| 634 | 250 |
| 251 ; ---- Salinity Limits | |
| 631 | 252 #DEFINE salinity_min .0 ; [%] minimum value for salinity percentage |
| 253 #DEFINE salinity_max .4 ; [%] maximum value for salinity percentage | |
| 0 | 254 |
| 634 | 255 |
| 256 ; ---- Color-Code Parameters for the Dive Mode | |
| 582 | 257 #DEFINE color_code_velocity_warn_high .11 ; [m/min] |
| 258 #DEFINE color_code_velocity_attn_high .10 ; [m/min] | |
| 623 | 259 #DEFINE velocity_display_threshold .3 ; [m/min] |
| 260 | |
| 261 | |
| 634 | 262 ; ---- Simulator Parameters |
| 623 | 263 #DEFINE simulator_startdepth .200 ; [mbar] initial depth (relative pressure) when entering simulator mode |
| 264 #DEFINE simulator_descent_threshold .50 ; [mbar] remaining distance to target pressure when to slow down descent | |
| 265 #DEFINE simulator_ascent_threshold .50 ; [mbar] remaining distance to target pressure when to slow down ascent | |
| 628 | 266 #DEFINE simulator_descent_rate .5 ; [mbar/0.125 sec] normal descent speed, 5 equals 24 m/min |
| 623 | 267 #DEFINE simulator_ascent_rate .2 ; [mbar/0.125 sec] normal ascent speed, 2 equals 9 m/min |
| 268 | |
| 0 | 269 |
| 634 | 270 ; ---- Battery Thresholds |
| 623 | 271 #DEFINE max_battery_charge_temp .3231 ; [0.1 Kelvin] max allowed battery temperature during charging (equals 50°C) |
| 604 | 272 #DEFINE lithium_36v_empty .2400 ; [mV] Saft 3.6 V LS14500 AA - threshold for battery percent display |
| 623 | 273 #DEFINE lithium_36v_low .2000 ; [mV] Saft 3.6 V LS14500 AA - lowest possible voltage, value must be higher than value of aa_15v_high! |
| 274 #DEFINE aa_15v_high .1550 ; [mV] Energizer 1.5 V E2 AA - highest possible voltage, value must be lower than value of lithium_36v_low! | |
| 275 #DEFINE aa_15v_low .1100 ; [mV] Energizer 1.5 V E2 AA - lowest possible voltage, according to Energizer data sheet EBC-4201R, page 2 | |
| 276 #DEFINE battery_show_level .30 ; [%] threshold when to show battery level | |
| 628 | 277 #DEFINE battery_warn_level_36 .15 ; [%] threshold for 3.6 V battery warning, also acts as threshold for setting display brightness level to ECO when in dive mode |
| 631 | 278 #DEFINE battery_warn_level_15 .25 ; [%] threshold for 1.5 V battery warning, also acts as threshold for setting display brightness level to ECO when in dive mode |
| 656 | 279 #DEFINE battery_cycle_counter_unlock .95 ; [%] threshold to unlock the charge cycle counter for a new charge cycle to count |
| 280 | |
| 281 #DEFINE rechargeable_36V_80 .3950 ; [mV] fixed threshold, from UR16650ZTA.PDF, page 2, 0°C | |
| 282 #DEFINE rechargeable_36V_60 .3780 ; [mV] fixed threshold, from UR16650ZTA.PDF, page 2, 0°C | |
| 283 #DEFINE rechargeable_36V_40 .3650 ; [mV] fixed threshold, from UR16650ZTA.PDF, page 2, 0°C | |
| 284 #DEFINE rechargeable_36V_20 .3500 ; [mV] fixed threshold, from UR16650ZTA.PDF, page 2, 0°C | |
| 285 #DEFINE rechargeable_36V_00 .3350 ; [mV] fixed threshold, from UR16650ZTA.PDF, page 2, 0°C | |
| 286 | |
| 634 | 287 ; ---- 3.6 Volt Battery Sensing Data Points at 70 mA Load |
| 582 | 288 #DEFINE lithium_36v_75 .3000 ; [mV] |
| 289 #DEFINE lithium_36v_50 .2900 ; [mV] | |
| 290 #DEFINE lithium_36v_25 .2600 ; [mV] | |
| 291 #DEFINE lithium_36v_10 .2500 ; [mV] | |
| 604 | 292 |
| 628 | 293 |
| 634 | 294 ; ---- Capacity for 2.4 Ah Saft LS14500 and 0.8 Ah Panasonic UR14500P |
| 623 | 295 ; battery_gauge: 6 is nAs |
| 448 | 296 ; devide through 65536 |
| 604 | 297 ; a) devide through 364 -> result is in percent of a 2.4 Ah battery |
| 298 ; or b) devide through 121 -> result is in percent of a 0.8 Ah battery | |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
35
diff
changeset
|
299 |
| 628 | 300 |
| 634 | 301 ; ---- internal Battery Gauging |
| 656 | 302 #DEFINE capacity_saft_internal .364 |
| 303 #DEFINE capacity_14500_internal .121 | |
| 623 | 304 |
| 448 | 305 |
| 604 | 306 ; Gauge IC |
| 640 | 307 #DEFINE capacity_saft .271 ; 2.3Ah/0.085mAh/100 [%] |
| 308 #DEFINE offset_saft .38477 ; 65536-(2.3Ah/0.085mAh) | |
| 448 | 309 |
| 656 | 310 #DEFINE capacity_14500 .94 ; 0.8Ah/0.085mAh/100 [%] |
| 311 #DEFINE offset_14500 .56124 ; 65536-(0.8Ah/0.085mAh) | |
| 312 | |
| 623 | 313 #DEFINE capacity_ncr18650 .364 ; 3.1Ah/0.085mAh/100 [%] |
| 314 #DEFINE offset_ncr18650 .29065 ; 65536-(3.1Ah/0.085mAh) | |
| 656 | 315 |
| 640 | 316 #DEFINE capacity_ur16650 .235 ; 2.0Ah/0.085mAh/100 [%] |
| 317 #DEFINE offset_ur16650 .42006 ; 65536-(2.0Ah/0.085mAh) | |
| 656 | 318 |
| 319 #DEFINE capacity_404050 .112 ; 0.96Ah/0.085mAh/100 [%] | |
| 320 #DEFINE offset_404050 .54241 ; 65536-(0.96Ah/0.085mAh) | |
| 654 | 321 |
| 634 | 322 ; ---- Power Consumption Values |
| 582 | 323 #DEFINE current_sleepmode .31 |
| 623 | 324 #DEFINE current_backlight_multi .115 ; * CCPR1L + current_backlight_offset (restricted to <= 255) |
| 582 | 325 #DEFINE current_backlight_offset .216 |
| 326 #DEFINE current_speed_eco .1914 | |
| 327 #DEFINE current_speed_normal .4027 | |
| 328 #DEFINE current_speed_fastest .5050 | |
| 329 #DEFINE current_ir_receiver .139 | |
| 330 #DEFINE current_compass .28 | |
| 0 | 331 |
| 623 | 332 |
| 634 | 333 ; ---- Brightness Thresholds (between zero (off) and 255 (max. power consumption)) |
| 582 | 334 #DEFINE ambient_light_max_high_36V .170 |
| 335 #DEFINE ambient_light_max_high_cr .240 | |
| 656 | 336 #DEFINE ambient_light_max_high_dn .240 |
| 337 #DEFINE ambient_no_sensor_high .190 | |
| 650 | 338 #DEFINE ambient_light_max_high_15V .100 |
| 582 | 339 #DEFINE ambient_light_min_high .35 |
| 650 | 340 #DEFINE ambient_light_max_medium .90 |
| 656 | 341 #DEFINE ambient_no_sensor_medium .50 |
| 582 | 342 #DEFINE ambient_light_min_medium .25 |
| 650 | 343 #DEFINE ambient_light_max_eco .50 |
| 656 | 344 #DEFINE ambient_no_sensor_eco .20 |
| 582 | 345 #DEFINE ambient_light_min_eco .10 ; must be the lowest value! |
| 0 | 346 |
| 623 | 347 |
| 634 | 348 ; ---- IR Link Timeout |
| 631 | 349 #DEFINE ir_timeout_value .128 ; in multiples of 62.5 ms |
| 623 | 350 |
| 0 | 351 |
| 634 | 352 ; ---- Setpoint Control |
| 582 | 353 #DEFINE surface_sp .50 ; in cbar |
|
352
5c6da9fa5cb0
add setpoint change to first sample in CCR mode
heinrichsweikamp
parents:
344
diff
changeset
|
354 |
| 623 | 355 |
| 634 | 356 ; ---- Gaslist hard-coded Limits |
| 357 IFDEF _helium | |
| 358 #DEFINE gaslist_min_o2 .7 ; minimum O2 [%] ( 7% is minimum value to keep MOD < 255 meters / 1 Byte) | |
| 359 #DEFINE gaslist_max_o2 .100 ; maximum O2 [%] | |
| 360 #DEFINE gaslist_max_He .100-gaslist_min_o2 ; maximum He [%] | |
| 361 #DEFINE gaslist_max_change_depth .140 ; max. change depth [m] | |
| 362 #DEFINE tissue_graphics_options .2 ; tissue graphics "Pres+Sat" and "N2+He" available | |
| 363 ELSE | |
| 364 #DEFINE gaslist_min_o2 .21 ; minimum O2 [%] | |
| 365 #DEFINE gaslist_max_o2 .100 ; maximum O2 [%] | |
| 366 #DEFINE gaslist_max_He .0 ; maximum He [%] | |
| 367 #DEFINE gaslist_max_change_depth .70 ; max. change depth [m] | |
| 368 #DEFINE tissue_graphics_options .1 ; tissue graphics "Pres+Sat" only available | |
| 369 ENDIF | |
| 370 | |
| 371 | |
| 372 ; ---- Setpoint list hard-coded Limits | |
| 373 #DEFINE gaslist_sp_max .160 ; max. setpoint [cbar] | |
| 374 #DEFINE gaslist_sp_min .50 ; min. setpoint [cbar] | |
| 375 #DEFINE gaslist_sp_max_depth .100 ; max change depth [m] | |
| 376 | |
| 377 | |
| 378 ; ---- Compass Display | |
| 379 #DEFINE compass_fast_treshold .9 ; show new heading instantly if angular difference > compass_fast_treshold, else show animated turning of compass rose | |
| 380 #DEFINE compass_averaging .10 ; number of averaging cycles | |
| 381 | |
| 657 | 382 ; ---- Scrubber timer |
| 383 #DEFINE low_scrubber_threshold .30 ; [min] Scrubber low threshold (16bit value) | |
| 634 | 384 |
| 385 ;----------------------------------------------------------------------------- | |
| 386 ; Bit Flags | |
| 387 ;----------------------------------------------------------------------------- | |
| 388 | |
| 389 ; ---- Gas / Diluent Type & State | |
| 631 | 390 ; .0 ; | 0: disabled, 1: first, 2: normal/work, 3: deco |
| 391 ; .1 ; | | |
| 392 #DEFINE gas_lost .2 ; =1: gas/diluent is lost (permanently unavailable) | |
| 393 #DEFINE gas_staged .3 ; =1: gas/diluent is staged (temporary unavailable) | |
| 394 ; .4 ; --- unused | |
| 395 ; .5 ; --- unused | |
| 396 ; .6 ; --- unused | |
| 397 ; .7 ; --- unused | |
| 398 | |
| 634 | 399 ; ---- Bit Flags for Communication with p2_deco.c - char_O_main_status |
| 623 | 400 #DEFINE DECO_VOLUME_FLAG .0 ; =1: calculate gas needs |
| 401 #DEFINE DECO_BOTTOM_FLAG .1 ; =1: calculate gas needs for full bottom segment, =0: ...for extra time only | |
| 402 #DEFINE DECO_CAVE_MODE .2 ; =1: calculate ascent and gas needs using backtracking data | |
| 631 | 403 #DEFINE DECO_GAS_CONTINGENCY .3 ; =1: use a second best gas if best gas is all used up |
| 623 | 404 #DEFINE DECO_TR_FUNCTIONS .4 ; =1: calculate TR functions (pressure readings) |
| 405 #DEFINE DECO_EXTENDED_STOPS .5 ; =1: place gas changes also below 1st stop depth | |
| 406 #DEFINE DECO_MODE_LOOP_FLAG .6 ; =1: calculate real tissues in loop mode (CCR or pSCR) | |
| 407 #DEFINE DECO_MODE_PSCR_FLAG .7 ; =1: calculate real tissues in pSCR mode (loop flag needs to be set, too) | |
| 408 | |
| 634 | 409 ; ---- Bit Flags for Communication with p2_deco.c - char_O_deco_status |
| 623 | 410 #DEFINE DECO_START_NORM .0 ; =1: write: start calculation of a normal deco plan |
| 411 #DEFINE DECO_START_ALT .1 ; =1: write: start calculation of an alternative deco plan | |
| 412 #DEFINE DECO_COMPLETED_NORM .0 ; =1: read: calculation of a normal deco plan has completed | |
| 413 #DEFINE DECO_COMPLETED_ALT .1 ; =1: read: calculation of an alternative deco plan has completed | |
| 414 #DEFINE DECO_INITIALIZE .2 ; =1: write: initialize deco engine (to be done only once at the begin of every dive) | |
| 628 | 415 #DEFINE DECO_CALCULATOR_MODE .3 ; =1: deco engone is run from the deco calculator |
| 623 | 416 #DEFINE DECO_BAILOUT_FLAG .4 ; =1: allow gas switches before first deco stop (used in bailout plans) |
| 631 | 417 #DEFINE DECO_DELAY_FLAG .5 ; =1: figure in a delayed ascent (fTTS) |
| 623 | 418 ; DECO_MODE_LOOP_FLAG .6 ; =1: calculate simulated tissues in loop mode (CCR or pSCR) |
| 419 ; DECO_MODE_PSCR_FLAG .7 ; =1: calculate simulated tissues in pSCR mode (loop flag needs to be set, too) | |
| 420 | |
| 634 | 421 ; ---- Bit Flags for Communication with p2_deco.c - char_O_deco_warnings |
| 623 | 422 #DEFINE IBCD_warning .0 ; =1: IBCD currently occuring |
| 423 #DEFINE IBCD_warning_lock .1 ; =1: IBCD occured durign the dive | |
| 424 #DEFINE mbubble_warning .2 ; =1: microbubbles potentionally currently occuring | |
| 425 #DEFINE mbubble_warning_lock .3 ; =1: microbubbles potentionally occured during the dive | |
| 426 #DEFINE outside_warning .4 ; =1: currently outside the ZHL-16 model | |
| 427 #DEFINE outside_warning_lock .5 ; =1: was outside the ZHL-16 model during the dive | |
| 428 #DEFINE outside_attention .6 ; =1: currently near to the limits of the ZHL-16 model | |
| 628 | 429 #DEFINE deco_plan_incomplete .7 ; =1: internal error: deco calculation incomplete |
| 623 | 430 |
| 634 | 431 ; ---- Bit Flags for Communication with p2_deco.c - char_O_deco_info |
| 628 | 432 #DEFINE deco_mode .0 ; =1: in deco mode, deco ppO2 levels permitted |
| 604 | 433 #DEFINE ind_double_switch .1 ; =1: switch to other tank advice active |
| 631 | 434 #DEFINE gas_needs_fTTS .2 ; =1: indicated gas needs are calculated in fTTS mode |
| 623 | 435 #DEFINE deco_zone .3 ; =1: fTTS is <= TTS (not updated when in bailout mode) |
| 604 | 436 #DEFINE deco_ceiling .4 ; =1: ceiling depth > 0 |
| 631 | 437 #DEFINE deco_stops_norm .5 ; =1: deco stops found in normal plan |
| 438 #DEFINE deco_stops_alt .6 ; =1: deco stops found in alternative plan | |
| 439 #DEFINE gas_needs_cave .7 ; =1: indicated gas needs are calculated in cave mode | |
| 623 | 440 |
| 634 | 441 ; ---- Bit Flags for Status on Variables of Type char |
| 604 | 442 #DEFINE char_transmitter_lost .6 |
| 443 #DEFINE char_invalid_flag .7 | |
| 444 #DEFINE char_transmitter_low_bat .7 | |
| 445 | |
| 634 | 446 ; ---- Bit Flags for Status on Variables of Type int (Flags are placed in the UPPER byte!) |
| 604 | 447 #DEFINE int_invalid_flag .2 |
| 448 #DEFINE int_not_yet_computed .3 | |
| 449 #DEFINE int_is_zero .3 | |
| 450 #DEFINE int_low_flag .4 | |
| 451 #DEFINE int_not_avail_flag .4 | |
| 452 #DEFINE int_high_flag .5 | |
| 453 #DEFINE int_outdated_flag .5 | |
| 454 #DEFINE int_attention_flag .6 | |
| 455 #DEFINE int_warning_flag .7 | |
| 0 | 456 |
| 623 | 457 |
| 0 | 458 ;----------------------------------------------------------------------------- |
| 623 | 459 ; Timebase and Eventbase (stored in access RAM, set by the ISR, trigger flags to be cleared by the application) |
| 634 | 460 ;----------------------------------------------------------------------------- |
| 623 | 461 |
| 462 #DEFINE timebase_0sec timebase,0 ; counting timebase, 1/2 sec bit | |
| 463 #DEFINE timebase_1sec timebase,1 ; counting timebase, 1 sec bit | |
| 464 #DEFINE timebase_2sec timebase,2 ; counting timebase, 2 sec bit | |
| 643 | 465 #DEFINE trigger_quarter_second timebase,3 ; =1: a new 1/4 second has begun (not synced with the other time flags) |
| 623 | 466 #DEFINE trigger_half_second timebase,4 ; =1: a new 1/2 second has begun |
| 467 #DEFINE trigger_full_second timebase,5 ; =1: a new 1/1 second has begun | |
| 468 #DEFINE trigger_full_minute timebase,6 ; =1: a new minute has begun | |
| 469 #DEFINE trigger_full_hour timebase,7 ; =1: a new hour has begun | |
| 470 | |
| 471 #DEFINE trigger_isr_updates eventbase,0 ; =1: the ISR had kicked in (set by ISR, used by ISR-safe copy macros) | |
| 472 #DEFINE trigger_timeout eventbase,1 ; =1: timeout signal by timeout service | |
| 473 #DEFINE trigger_sample_divedata eventbase,2 ; =1: time to store a new sample | |
| 474 #DEFINE trigger_S8_data_update eventbase,3 ; =1: new S8 digital data are available | |
| 634 | 475 ; eventbase,4 ; --- unused |
| 623 | 476 #DEFINE trigger_pres_cur_changed eventbase,5 ; =1: current pressure value has changed |
| 477 #DEFINE trigger_pres_max_changed eventbase,6 ; =1: maximum pressure value has changed | |
| 478 #DEFINE trigger_temp_changed eventbase,7 ; =1: temperature value has changed | |
| 479 | |
| 480 | |
| 481 ;----------------------------------------------------------------------------- | |
| 482 ; Flags - stored in access RAM | |
| 634 | 483 ;----------------------------------------------------------------------------- |
| 623 | 484 |
| 485 ;---- Hardware - OSTC Model Descriptor (stored in access RAM, cleared & rebuilt in restart, to preserve compatibility with 3rd party tools DO NOT alter bit positions) | |
| 656 | 486 #DEFINE battery_gauge_available HW_descriptor,0 ; =1: OSTC has rechargeable battery with battery management chip |
| 623 | 487 #DEFINE ambient_sensor HW_descriptor,1 ; =1: OSTC has an ambient light sensor |
| 634 | 488 #DEFINE ext_input_s8_ana HW_descriptor,2 ; =1: OSTC has S8/analog input |
| 656 | 489 #DEFINE ext_input_optical HW_descriptor,3 ; =1: OSTC has optical input or uses fully digital external interface |
| 634 | 490 #DEFINE ble_available HW_descriptor,4 ; =1: OSTC has an BT module |
| 623 | 491 #DEFINE ostc_rx_present HW_descriptor,5 ; =1: OSTC has RX module |
| 648 | 492 #DEFINE lv_core HW_descriptor,6 ; =1: OSTC has low-voltage core (2.7V) |
| 634 | 493 #DEFINE flash_block_write HW_descriptor,7 ; =1: OSTC has FLASH with block-write capability |
| 623 | 494 |
| 495 ;---- Hardware - OSTC Model Variants (stored in access RAM, NOT cleared in restart) | |
| 628 | 496 #DEFINE screen_type1 HW_variants,0 ; =1: display type 1, =0; display type 0 |
| 497 #DEFINE screen_type2 HW_variants,1 ; =1: display type 2, =0: display type 0 or 1 | |
| 498 #DEFINE screen_type3 HW_variants,2 ; =1: display type 3, =0: display type 0 or 1 or 2 | |
| 499 #DEFINE compass_type1 HW_variants,3 ; =1: compass type 1, =0: compass type 0 | |
| 500 #DEFINE compass_type2 HW_variants,4 ; =1: compass type 2, =0: compass type 0 or 1 | |
| 501 #DEFINE compass_type3 HW_variants,5 ; =1: compass type 3, =0: compass type 0 or 1 or 2 | |
| 502 #DEFINE analog_switches HW_variants,6 ; =1: analog switches available | |
| 503 #DEFINE battery_is_36v HW_variants,7 ; =1: a 3.6 Volt battery is detected | |
| 624 | 504 |
| 643 | 505 ;---- Hardware - OSTC Model Variants2 (stored in access RAM, NOT cleared in restart) |
| 506 #DEFINE press_sensor_type HW_variants2,0 ; =1: pressure sensor MS5837, =0: Pressure sensor MS5541 | |
| 648 | 507 #DEFINE less_io_cpu HW_variants2,1 ; =1: OSTC has a CPU with less I/O pins |
| 654 | 508 #DEFINE screen_type4 HW_variants2,2 ; =1: display type 4, =0: display type 0 or 1 or 2 or 3 |
| 509 #DEFINE dn_flag HW_variants2,3 ; =1: dn | |
| 656 | 510 #DEFINE screen_type5 HW_variants2,4 ; =1: display type 5, =0: display type 0 or 1 or 2 or 3 or 4 |
| 511 #DEFINE compass_type0 HW_variants2,5 ; =1: compass type 0, =0: compass type 1 or 2 | |
| 512 #DEFINE compass_present HW_variants2,6 ; =1: a compass is present, =0: hardware w/o compass | |
| 513 #DEFINE battery_gauge_type HW_variants2,7 ; =1: Gauge IC LTC2959, =0: LT2942 | |
| 623 | 514 |
| 656 | 515 ;---- Hardware - OSTC Model Variants3 (stored in access RAM, NOT cleared in restart) |
| 516 #DEFINE dual_comm HW_variants3,0 ; =1: dual comm hardware (USB and BLE-only) | |
| 657 | 517 #DEFINE adjustable_buttons HW_variants3,1 ; =1: The buttons have adjustable sensitivity |
| 656 | 518 |
| 628 | 519 ;---- Hardware - States 1 (stored in access RAM, cleared on restart) |
| 520 #DEFINE analog_sw1_pressed HW_flags_state1,0 ; =1: analog switch 1 pressed | |
| 521 #DEFINE analog_sw2_pressed HW_flags_state1,1 ; =1: analog switch 2 pressed | |
| 522 #DEFINE switch_left HW_flags_state1,2 ; =1: left button was pressed | |
| 523 #DEFINE switch_right HW_flags_state1,3 ; =1: right button was pressed | |
| 524 #DEFINE flip_screen HW_flags_state1,4 ; =1: screen is shown 180° turned | |
| 525 #DEFINE adc_is_running HW_flags_state1,5 ; =1: the ADC is in use | |
| 526 #DEFINE tft_is_dimming HW_flags_state1,6 ; =1: the TFT is dimming, ignore light sensor | |
| 527 #DEFINE compass_enabled HW_flags_state1,7 ; =1: the compass and accelerometer chip is active | |
| 528 | |
| 529 ;---- Hardware - States 2 (stored in access RAM, NOT cleared on restart) | |
| 530 #DEFINE cc_active HW_flags_state2,0 ; =1: constant current charging active (cR hardware only) | |
| 531 #DEFINE cv_active HW_flags_state2,1 ; =1: constant voltage charging active (cR hardware only) | |
| 631 | 532 #DEFINE i2c_error_flag HW_flags_state2,2 ; =1: an I2C error occurred |
| 533 #DEFINE rs232_rx_timeout HW_flags_state2,3 ; =1: RS232 receive timeout occurred | |
| 634 | 534 #DEFINE battery_low_condition HW_flags_state2,4 ; =1: low battery condition detected |
| 535 #DEFINE flash_wrap_around HW_flags_state2,5 ; =1: address wrap-around control / signalling | |
| 536 #DEFINE flash_wait HW_flags_state2,6 ; =1: wait for flash write operation to complete | |
| 643 | 537 #DEFINE i2c_busy_temperature HW_flags_state2,7 ; =1: Currently updating temperature from MS5837 |
| 623 | 538 |
| 643 | 539 ;---- Hardware - States 3 (stored in access RAM, NOT cleared on restart) |
| 540 #DEFINE ms5837_state HW_flags_state3,0 ; =1: result of pressure is in the ADC | |
| 541 #DEFINE i2c_busy_pressure HW_flags_state3,1 ; =1: Currently updating pressure from MS5837 | |
| 650 | 542 #DEFINE eeprom_write_error_flag HW_flags_state3,2 ; =1: an EEPROM write error occurred (Reset only in a Reboot/POR) |
| 654 | 543 #DEFINE lock_cycle_counter HW_flags_state3,3 ; =1: Do not count charge cycle (again), cleared when batt_percent<95% |
| 656 | 544 #DEFINE i2c_error_flag_lock HW_flags_state3,4 ; =1: The last I2C error was not displayed yet |
| 545 #DEFINE i2c_reinit_sensor2 HW_flags_state3,5 ; =1: Do an I2C reset and reinitialize the pressure sensor type 2 | |
| 643 | 546 ; HW_flags_state3,6 ; --- unused |
| 547 ; HW_flags_state3,7 ; --- unused | |
| 548 | |
| 623 | 549 ;---- Operating System - persistent Settings (stored in access RAM, NOT cleared in restart) |
| 550 #DEFINE sensor1_calibrated_ok OS_flags_persist,0 ; =1: sensor 1 calibration ok | |
| 551 #DEFINE sensor2_calibrated_ok OS_flags_persist,1 ; =1: sensor 2 calibration ok | |
| 552 #DEFINE sensor3_calibrated_ok OS_flags_persist,2 ; =1: sensor 3 calibration ok | |
| 553 #DEFINE compass_bearing_set OS_flags_persist,3 ; =1: compass bearing is set | |
| 554 #DEFINE use_old_batt_flag OS_flags_persist,4 ; =1: load old battery data after power-on reset | |
| 634 | 555 #DEFINE option_changed OS_flags_persist,5 ; =1: option values have been changed, EEPROM needs to be updated |
| 631 | 556 #DEFINE restart_fast OS_flags_persist,6 ; =1: request to skip logos and waits on restart |
| 623 | 557 #DEFINE battery_overtemp OS_flags_persist,7 ; =1: battery charging temperature limit exceeded |
| 558 | |
| 559 | |
| 560 ;---- Operating System - ISR Control 1 (stored in access RAM) | |
| 634 | 561 #DEFINE reset_timebase OS_flags_ISR1,0 ; =1: request ISR to reset the timebase for the trigger flags |
| 562 #DEFINE restart_timeout OS_flags_ISR1,1 ; =1: request ISR to resart the timeout timer | |
| 563 #DEFINE reset_max_pressure OS_flags_ISR1,2 ; =1: request ISR to reset the maximum pressure to zero | |
| 564 #DEFINE reset_surface_interval OS_flags_ISR1,3 ; =1: request ISR to reset the surface interval to zero | |
| 565 #DEFINE reset_trip_pressure OS_flags_ISR1,4 ; =1: request ISR to reset the resettable min/max pressure | |
| 623 | 566 #DEFINE block_rtc_access OS_flags_ISR1,5 ; =1: suspend the ISR from accessing the RTC |
| 567 #DEFINE block_battery_gauge OS_flags_ISR1,6 ; =1: suspend the ISR from updating the battery gauge | |
| 568 #DEFINE block_sensor_interrupt OS_flags_ISR1,7 ; =1: suspend the ISR from executing sensor interrupts | |
| 569 | |
| 570 ;---- Operating System - ISR Control 2 (stored in access RAM) | |
| 571 #DEFINE update_surface_pressure OS_flags_ISR2,0 ; =1: request ISR to update the surface pressure | |
| 572 #DEFINE quit_simulatormode OS_flags_ISR2,1 ; =1: request ISR to quit the simulator mode | |
| 573 #DEFINE count_divetime OS_flags_ISR2,2 ; =1: request ISR to count the dive time | |
| 574 #DEFINE sensor_override_request OS_flags_ISR2,3 ; =1: request ISR to override the pressure sensor with a simulated depth | |
| 634 | 575 #DEFINE tmr5_preemtion_allowed OS_flags_ISR2,4 ; =1: allow preemption of timeout counter |
| 640 | 576 #DEFINE button_hold_down_allowed OS_flags_ISR2,5 ; =1: OSTC uses mechanical push buttons |
| 623 | 577 #DEFINE sensor_override_active OS_flags_ISR2,6 ; =1: ISR output: switch to override-mode confirmed |
| 578 #DEFINE divetime_longer_1min OS_flags_ISR2,7 ; =1: ISR output: dive time is >= one minute | |
| 579 | |
| 580 | |
| 581 ;---- Operating Modes (stored in access RAM, persistent) | |
| 582 #DEFINE sleepmode OM_flags_mode,0 ; =1: in sleep mode | |
| 583 #DEFINE divemode OM_flags_mode,1 ; =1: in dive mode | |
| 584 #DEFINE simulatormode OM_flags_mode,2 ; =1: in simulator mode | |
| 585 #DEFINE high_altitude_mode OM_flags_mode,3 ; =1: unit was manually turned on with absolute pressure < 880 mbar | |
| 656 | 586 #DEFINE ext_s8_full_digital OM_flags_mode,4 ; =1: External S8 full digital mode |
| 623 | 587 #DEFINE tr_functions_activated OM_flags_mode,5 ; =1: TR module is available and TR mode is <> off |
| 588 #DEFINE cold_start OM_flags_mode,6 ; =1: restart is entered from a cold start | |
| 589 IFDEF _screendump | |
| 590 #DEFINE screen_dump_avail OM_flags_mode,7 ; =1: screen dump function is available | |
| 591 ELSE | |
| 592 #DEFINE comm_mode_disabled OM_flags_mode,7 ; =1: COMM mode is disabled | |
| 593 ENDIF | |
| 594 | |
| 595 | |
| 596 ;---- Dive Modes - Deco Modes (stored in access RAM) | |
| 597 #DEFINE FLAG_oc_mode DM_flags_deco,0 ; =1: in OC mode active | |
| 598 #DEFINE FLAG_ccr_mode DM_flags_deco,1 ; =1: in CCR mode (fixed ppO2 or sensor) active | |
| 599 #DEFINE FLAG_gauge_mode DM_flags_deco,2 ; =1: in gauge mode | |
| 600 #DEFINE FLAG_apnoe_mode DM_flags_deco,3 ; =1: in apnoe mode | |
| 601 #DEFINE FLAG_pscr_mode DM_flags_deco,4 ; =1: in pSCR mode | |
| 602 #DEFINE bailout_mode DM_flags_deco,5 ; =1: in bailout mode | |
| 603 #DEFINE apnoe_at_surface DM_flags_deco,6 ; =1: at the surface, 0= submerged (apnoe mode only, set/reset by ISR) | |
| 604 #DEFINE apnoe_new_dive DM_flags_deco,7 ; =1: a new dive has begun (apnoe mode only, set by ISR) | |
| 605 | |
| 606 | |
| 607 ;----------------------------------------------------------------------------- | |
| 608 ; Flags - stored in bank common | |
| 634 | 609 ;----------------------------------------------------------------------------- |
| 623 | 610 |
| 611 ;---- Dive Mode - Dive States | |
| 612 #DEFINE use_aGF DM_flags_state,0 ; =1: use aGF, =0: use GF | |
| 654 | 613 ;#DEFINE deco_locked DM_flags_state,1 ; =1: in or has been in deco obligation during the dive |
| 631 | 614 #DEFINE deco_region DM_flags_state,2 ; =1: in or has been in the deco stops region during the dive |
| 615 #DEFINE cave_mode DM_flags_state,3 ; =1: cave mode is active (cave mode) | |
| 616 #DEFINE dive_turned DM_flags_state,4 ; =1: dive is turned (cave mode) | |
| 617 #DEFINE backtrack_almost_full DM_flags_state,5 ; =1: the backtracking storage is almost full (cave mode) | |
| 618 #DEFINE backtrack_entire_full DM_flags_state,6 ; =1: the backtracking storage is entirely full (cave mode) | |
| 619 #DEFINE backtrack_shutdown DM_flags_state,7 ; =1: the backtracking has shut down due to entirely full (cave mode) | |
| 582 | 620 |
| 640 | 621 ;---- Dive Mode - O2 Sensors & Setpoint |
| 623 | 622 #DEFINE use_O2_sensor1 DM_flags_sensor,0 ; =1: sensor 1 shall be used |
| 623 #DEFINE use_O2_sensor2 DM_flags_sensor,1 ; =1: sensor 2 shall be used | |
| 624 #DEFINE use_O2_sensor3 DM_flags_sensor,2 ; =1: sensor 3 shall be used | |
| 625 #DEFINE voting_logic_sensor1 DM_flags_sensor,3 ; =1: sensor 1 is within the voting logic threshold | |
| 626 #DEFINE voting_logic_sensor2 DM_flags_sensor,4 ; =1: sensor 2 is within the voting logic threshold | |
| 627 #DEFINE voting_logic_sensor3 DM_flags_sensor,5 ; =1: sensor 3 is within the voting logic threshold | |
| 634 | 628 ; DM_flags_sensor,6 ; --- unused |
| 640 | 629 #DEFINE restart_auto_sp DM_flags_sensor,7 ; =1: re-run the auto SP selection from 1st SP |
| 623 | 630 |
| 631 | 631 ;---- Dive Mode - User Requests / General |
| 632 #DEFINE request_gas_change DM_flags_request,0 ; =1: request to change the gas | |
| 633 #DEFINE request_gas_update DM_flags_request,1 ; =1: request to update the gas | |
| 634 #DEFINE request_reset_avg DM_flags_request,2 ; =1: request to reset the average depth | |
| 635 #DEFINE request_next_custview DM_flags_request,3 ; =1: request to show the next custom view | |
| 636 #DEFINE request_back_to_loop DM_flags_request,4 ; =1: request to switch back from bailout to loop | |
| 637 #DEFINE request_toggle_GF DM_flags_request,5 ; =1: request to toggle between GF and aGF | |
| 638 #DEFINE request_set_marker DM_flags_request,6 ; =1: request to set a marker in the logbook | |
| 639 #DEFINE request_restart_engine DM_flags_request,7 ; =1: request to restart the deco engine | |
| 640 | |
| 641 ;---- Dive Mode - User Requests / Cave Mode | |
| 642 #DEFINE request_cave_toggle DM_flags_cavereq,0 ; =1: request to toggle cave mode off/on (cave mode) | |
| 643 #DEFINE request_cave_off_turned DM_flags_cavereq,1 ; =1: request to switch cave mode off (cave mode) | |
| 644 #DEFINE request_turn_toggle DM_flags_cavereq,2 ; =1: request to toggle dive turned state (cave mode) | |
| 645 #DEFINE request_turn_turn DM_flags_cavereq,3 ; =1: request to switch dive turned state to turned (cave mode) | |
| 646 #DEFINE request_waypoint_set DM_flags_cavereq,4 ; =1: request to set a waypoint (cave mode) | |
| 647 #DEFINE request_waypoint_out DM_flags_cavereq,5 ; =1: request to go one waypoint out of the cave (cave mode) | |
| 648 #DEFINE request_waypoint_in DM_flags_cavereq,6 ; =1: request to go one waypoint into the cave (cave mode) | |
| 649 ; DM_flags_cavereq,7 ; --- unused | |
| 623 | 650 |
| 651 ;---- Dive Mode - Data Recording Events | |
| 652 #DEFINE event_occured DM_flags_event,0 ; =1: an event occurred (global indicator flag) | |
| 653 #DEFINE event_gas_change DM_flags_event,1 ; =1: a change to another gas or diluent occurred | |
| 654 #DEFINE event_gas_change_gas6 DM_flags_event,2 ; =1: a change to or of the gas 6 has occurred | |
| 655 #DEFINE event_bailout DM_flags_event,3 ; =1: a change to or of the OC gas occurred due to bailout | |
| 656 #DEFINE event_SP_change DM_flags_event,4 ; =1: a change of the setpoint has occurred | |
| 657 ; DM_flags_event,5 ; --- unused | |
| 631 | 658 ; DM_flags_event,6 ; --- unused |
| 659 ; DM_flags_event,7 ; --- unused | |
| 623 | 660 |
| 661 ;---- Dive Mode - Display Control / Layout | |
| 662 #DEFINE safety_stop_enabled DM_flags_layout1,0 ; =1: safety stop is enabled | |
| 663 #DEFINE safety_stop_active DM_flags_layout1,1 ; =1: safety stop is shown | |
| 664 #DEFINE decostop_active DM_flags_layout1,2 ; =1: decompression stop is shown | |
| 665 #DEFINE velocity_active_num DM_flags_layout1,3 ; =1: numerical velocity indicator is shown | |
| 666 #DEFINE velocity_active_vsi DM_flags_layout1,4 ; =1: graphical velocity indicator is shown | |
| 667 #DEFINE alt_layout_active DM_flags_layout1,5 ; =1: the alternative dive layout is used (aka "blind mode") | |
| 668 #DEFINE neg_flag_velocity DM_flags_layout1,6 ; =1: descending, used by velocity logic | |
| 669 #DEFINE show_only_divemins DM_flags_layout1,7 ; =1: only dive minutes are shown | |
| 670 | |
| 671 #DEFINE cur_depth_greater_100m DM_flags_layout2,0 ; =1: current depth > 100 meters | |
| 672 #DEFINE max_depth_greater_100m DM_flags_layout2,1 ; =1: max. depth > 100 meters | |
| 634 | 673 #DEFINE depth_color_attention DM_flags_layout2,2 ; =1: show depth in attention color |
| 674 #DEFINE depth_color_warning DM_flags_layout2,3 ; =1: show depth in warning color | |
| 675 #DEFINE depth_color_last DM_flags_layout2,4 ; =1: last depth was shown in warning or attention color | |
| 623 | 676 #DEFINE depth_inverse_last DM_flags_layout2,5 ; =1: last depth was shown in inverse |
| 634 | 677 #DEFINE gas_needs_mode_last DM_flags_layout2,6 ; =1: last gas needs were computed for cave mode, =0: vertical ascent |
| 678 #DEFINE tts_over_99_last DM_flags_layout2,7 ; =1: last TTS was > 99 minutes | |
| 623 | 679 |
| 631 | 680 #DEFINE tissue_graphic_layout DM_flags_layout3,0 ; =1: show pres+sat, =0: show N2/He pressures |
| 681 #DEFINE tissue_graphic_gf DM_flags_layout3,1 ; =1: show GF lines | |
| 682 #DEFINE tissue_graphic_cns DM_flags_layout3,2 ; =1: shwo CNS value (surface mode graphic only) | |
| 683 #DEFINE tissue_graphic_mode DM_flags_layout3,3 ; =1: logbook mode (surface mode graphic only) | |
| 684 ; DM_flags_layout3,4 ; --- unused | |
| 685 ; DM_flags_layout3,5 ; --- unused | |
| 686 ; DM_flags_layout3,6 ; --- unused | |
| 687 ; DM_flags_layout3,7 ; --- unused | |
| 688 | |
| 689 | |
| 690 ;---- Dive Mode - Display Control / Gas, Diluent, Depth | |
| 623 | 691 #DEFINE better_gas_hint DM_flags_gas_dil,0 ; =1: mark a gas when it is a better gas |
| 631 | 692 #DEFINE color_code_gases DM_flags_gas_dil,1 ; =1: color code the gases by ppO2 & current depth |
| 693 #DEFINE better_gas_available DM_flags_gas_dil,2 ; =1: a better gas is available | |
| 694 #DEFINE better_gas_blinking DM_flags_gas_dil,3 ; =1: gas is blinking | |
| 695 #DEFINE better_dil_available DM_flags_gas_dil,4 ; =1: a better diluent is available | |
| 696 #DEFINE better_dil_blinking DM_flags_gas_dil,5 ; =1: diluent is blinking | |
| 697 #DEFINE gas6_or_EXIT DM_flags_gas_dil,6 ; =1: exit menu, =0: provide gas6 option | |
| 634 | 698 ; DM_flags_gas_dil,7 ; --- unused |
| 699 | |
| 700 | |
| 701 ;---- Dive Mode - Display Control / Messages | |
| 702 #DEFINE sign_shown DM_flags_message,0 ; =1: the warning/attention/advice sign is shown | |
| 703 #DEFINE sign_advice DM_flags_message,1 ; =1: the sign shown is an advice sign | |
| 704 #DEFINE sign_attention DM_flags_message,2 ; =1: the sign shown is an attention sign | |
| 705 #DEFINE sign_warning DM_flags_message,3 ; =1: the sign shown is a warning sign | |
| 706 #DEFINE message_2nd_row_used DM_flags_message,4 ; =1: the second row contains a warning/attention/advice | |
| 707 ; DM_flags_message,5 ; --- unused | |
| 708 ; DM_flags_message,6 ; --- unused | |
| 709 ; DM_flags_message,7 ; --- unused | |
| 710 | |
| 711 | |
| 712 ;---- Dive Mode - Display Control / Advices | |
| 713 #DEFINE advc_det_change_gas DM_flags_advc_det,0 ; =1: change gas advice | |
| 714 #DEFINE advc_det_switch_tank DM_flags_advc_det,1 ; =1: change tank advice | |
| 715 ; DM_flags_advc_det,2 ; --- unused | |
| 716 ; DM_flags_advc_det,3 ; --- unused | |
| 717 ; DM_flags_advc_det,4 ; --- unused | |
| 718 ; DM_flags_advc_det,5 ; --- unused | |
| 719 ; DM_flags_advc_det,6 ; --- unused | |
| 720 ; DM_flags_advc_det,7 ; --- unused | |
| 721 | |
| 722 | |
| 723 ;---- Dive Mode - Display Control / Attentions | |
| 724 #DEFINE attn_det_gas_needs DM_flags_att1_det,0 ; =1: gas needs attention threshold reached | |
| 725 #DEFINE attn_det_ppo2_breathed DM_flags_att1_det,1 ; =1: breathed ppO2 attention threshold reached | |
| 726 #DEFINE attn_det_ppo2_diluent DM_flags_att1_det,2 ; =1: diluent ppO2 attention threshold reached | |
| 727 #DEFINE attn_det_cns_current DM_flags_att1_det,3 ; =1: current CNS attention threshold reached | |
| 728 #DEFINE attn_det_gas_density DM_flags_att1_det,4 ; =1: gas density attention threshold reached | |
| 729 #DEFINE attn_det_saturation DM_flags_att1_det,5 ; =1: tissue saturation attention threshold reached | |
| 730 #DEFINE attn_det_outside DM_flags_att1_det,6 ; =1: outside model attention issued | |
| 731 #DEFINE attn_det_microbubble DM_flags_att1_det,7 ; =1: µ-bubble attention issued | |
| 732 | |
| 733 #DEFINE attn_det_sac_rate DM_flags_att2_det,0 ; =1: SAC rate attention threshold reached | |
| 734 #DEFINE attn_det_pressure1 DM_flags_att2_det,1 ; =1: tank 1 pressure attention threshold reached | |
| 735 #DEFINE attn_det_pressure2 DM_flags_att2_det,2 ; =1: tank 2 pressure attention threshold reached | |
| 736 #DEFINE attn_det_ibcd DM_flags_att2_det,3 ; =1: IBCD attention issued | |
| 737 #DEFINE attn_det_cave_shut_down DM_flags_att2_det,4 ; =1: cave mode shutdown attention issued | |
| 738 #DEFINE attn_det_sensor1_lost DM_flags_att2_det,5 ; =1: sensor 1 lost attention issued | |
| 739 #DEFINE attn_det_sensor2_lost DM_flags_att2_det,6 ; =1: sensor 2 lost attention issued | |
| 740 #DEFINE attn_det_sensor3_lost DM_flags_att2_det,7 ; =1: sensor 3 lost attention issued | |
| 741 | |
| 742 #DEFINE attn_det_xmit1_bat DM_flags_att3_det,0 ; =1: xmitter 1 low batt attention issued | |
| 743 #DEFINE attn_det_xmit2_bat DM_flags_att3_det,1 ; =1: xmitter 2 low batt attention issued | |
| 744 #DEFINE attn_det_cns_eod DM_flags_att3_det,2 ; =1: end-of-dive CNS attention threshold reached | |
| 657 | 745 #DEFINE attn_scrubber_timer DM_flags_att3_det,3 ; =1: Scrubber timer runs out or is negative |
| 634 | 746 ; DM_flags_att3_det,4 ; --- unused |
| 747 ; DM_flags_att3_det,5 ; --- unused | |
| 748 ; DM_flags_att3_det,6 ; --- unused | |
| 749 ; DM_flags_att3_det,7 ; --- unused | |
| 750 | |
| 751 ;---- Dive Mode - Display Control / Warnings | |
| 752 #DEFINE warn_det_gas_needs DM_flags_war1_det,0 ; =1: gas needs warning threshold reached | |
| 753 #DEFINE warn_det_ppO2_breathed DM_flags_war1_det,1 ; =1: breathed ppO2 warning threshold reached | |
| 754 #DEFINE warn_det_ppO2_diluent DM_flags_war1_det,2 ; =1: diluent ppO2 warning threshold reached | |
| 755 #DEFINE warn_det_cns_current DM_flags_war1_det,3 ; =1: current CNS warning threshold reached | |
| 756 #DEFINE warn_det_gas_density DM_flags_war1_det,4 ; =1: gas density warning threshold reached | |
| 757 #DEFINE warn_det_saturation DM_flags_war1_det,5 ; =1: tissue saturation warning threshold reached | |
| 758 #DEFINE warn_det_outside DM_flags_war1_det,6 ; =1: outside model warning issued | |
| 759 #DEFINE warn_det_microbubble DM_flags_war1_det,7 ; =1: µ-bubble warning issued | |
| 760 | |
| 761 #DEFINE warn_det_cave_shut_down DM_flags_war2_det,0 ; =1: cave mode shutdown warning issued | |
| 762 #DEFINE warn_det_pressure1 DM_flags_war2_det,1 ; =1: tank pressure 1 warning threshold reached | |
| 763 #DEFINE warn_det_pressure2 DM_flags_war2_det,2 ; =1: tank pressure 2 warning threshold reached | |
| 764 #DEFINE warn_det_batt_low DM_flags_war2_det,3 ; =1: battery low warning issued | |
| 765 #DEFINE warn_det_depth_limit DM_flags_war2_det,4 ; =1: depth limit warning issued | |
| 766 #DEFINE warn_det_sensors_lost DM_flags_war2_det,5 ; =1: sensors lost warning issued | |
| 767 #DEFINE warn_det_sensors_div DM_flags_war2_det,6 ; =1: sensors divergence warning issued | |
| 768 #DEFINE warn_det_no_bo_gas DM_flags_war2_det,7 ; =1: no B/O gas avail warning issued | |
| 769 | |
| 770 | |
| 771 ;---- Dive Mode - Display Control / Custom View automatic show-up | |
| 772 #DEFINE shown_gas_needs_attn DM_flags_shown1,0 ; =1: gas needs attention has been shown before | |
| 773 #DEFINE shown_gas_needs_warn DM_flags_shown1,1 ; =1: gas needs warning has been shown before | |
| 774 #DEFINE shown_sensors_diverg DM_flags_shown1,2 ; =1: sensor divergence has been shown before | |
| 775 #DEFINE shown_sensors_lost DM_flags_shown1,3 ; =1: sensor all lost has been shown before | |
| 776 #DEFINE shown_sensor1_fail DM_flags_shown1,4 ; =1: sensor 1 failure has been shown before | |
| 777 #DEFINE shown_sensor2_fail DM_flags_shown1,5 ; =1: sensor 2 failure has been shown before | |
| 778 #DEFINE shown_sensor3_fail DM_flags_shown1,6 ; =1: sensor 3 failure has been shown before | |
| 779 ; DM_flags_shown1,7 ; --- unused | |
| 780 | |
| 781 #DEFINE shown_xmit1_lost DM_flags_shown2,0 ; =1: xmitter 1 lost has been shown before | |
| 782 #DEFINE shown_xmit1_battery DM_flags_shown2,1 ; =1: xmitter 1 batt low has been shown before | |
| 783 #DEFINE shown_xmit1_pres_warn DM_flags_shown2,2 ; =1: xmitter 1 pres warn has been shown before | |
| 784 #DEFINE shown_xmit1_pres_attn DM_flags_shown2,3 ; =1: xmitter 1 pres attn has been shown before | |
| 785 #DEFINE shown_xmit2_lost DM_flags_shown2,4 ; =1: xmitter 2 lost has been shown before | |
| 786 #DEFINE shown_xmit2_battery DM_flags_shown2,5 ; =1: xmitter 2 batt low has been shown before | |
| 787 #DEFINE shown_xmit2_pres_warn DM_flags_shown2,6 ; =1: xmitter 2 pres warn has been shown before | |
| 788 #DEFINE shown_xmit2_pres_attn DM_flags_shown2,7 ; =1: xmitter 2 pres attn has been shown before | |
| 789 | |
| 790 #DEFINE shown_gas_density_attn DM_flags_shown3,0 ; =1: gas density atten. has been shown before | |
| 791 #DEFINE shown_gas_density_warn DM_flags_shown3,1 ; =1: gas density warning has been shown before | |
| 792 ; DM_flags_shown3,2 ; --- unused | |
| 793 ; DM_flags_shown3,3 ; --- unused | |
| 794 ; DM_flags_shown3,4 ; --- unused | |
| 795 ; DM_flags_shown3,5 ; --- unused | |
| 796 ; DM_flags_shown3,6 ; --- unused | |
| 797 ; DM_flags_shown3,7 ; --- unused | |
| 798 | |
| 623 | 799 |
| 800 ;---- Menu System - Control | |
| 634 | 801 #DEFINE surfmode_menu MS_flags_control,0 ; =1: surface menu is shown (i.e. returning from it) |
| 802 #DEFINE dive_pre_menu MS_flags_control,1 ; =1: dive pre-menu is shown (e.g. "Menu?") | |
| 803 #DEFINE dive_main_menu MS_flags_control,2 ; =1: dive main menu is shown (i.e. the "big" menu) | |
| 623 | 804 #DEFINE compass_menu MS_flags_control,3 ; =1: "set bearing" is shown |
| 805 #DEFINE is_diluent_menu MS_flags_control,4 ; =1: setting up diluents, =0: setting up OC gases | |
| 806 #DEFINE is_bailout_menu MS_flags_control,5 ; =1: in bailout menu | |
| 631 | 807 #DEFINE custom_view_locked MS_flags_control,6 ; =1: the custom view is locked (defer CV auto-popup) |
| 634 | 808 #DEFINE option_stop_at_max MS_flags_control,7 ; =1: option increment will stop at max value (no wrap around) |
| 623 | 809 |
| 810 ;---- Menu System - Data Imprinting | |
| 811 #DEFINE imprint_time_date MS_flags_imprint,0 ; =1: imprint current time & date | |
| 812 #DEFINE imprint_color_schemes MS_flags_imprint,1 ; =1: imprint color schemes | |
| 813 #DEFINE imprint_sensor_mv MS_flags_imprint,2 ; =1: imprint O2 sensor mV data | |
| 814 #DEFINE imprint_xmitter_pres MS_flags_imprint,3 ; =1: imprint transmitter pressure data | |
| 815 #DEFINE imprint_xmitter_ID MS_flags_imprint,4 ; =1: in transmitter-to-tank pairing menu | |
| 816 #DEFINE imprint_surfmode_data MS_flags_imprint,5 ; =1: imprint surface mode data | |
| 634 | 817 #DEFINE block_option_value MS_flags_imprint,6 ; =1: suspend displaying of option values |
| 818 #DEFINE short_gas_descriptions MS_flags_imprint,7 ; =1: use short versions of gaslist_strcat_gas_cd and gaslist_strcat_setpoint | |
| 623 | 819 |
| 0 | 820 |
| 623 | 821 ;---- Font & Image System |
| 822 #DEFINE aa_antialias AA_flags,0 ; used by aa_wordprocessor | |
| 823 #DEFINE aa_color_quarter AA_flags,1 ; used by aa_wordprocessor | |
| 824 #DEFINE aa_color_half AA_flags,2 ; used by aa_wordprocessor | |
| 825 #DEFINE aa_aux_flag AA_flags,3 ; auxiliary flag for various purposes | |
| 826 #DEFINE use_custom_colors AA_flags,4 ; =1: override default pixel colors, used by color_image | |
| 634 | 827 #DEFINE win_invert AA_flags,5 ; =1: print in inverse video |
| 656 | 828 #DEFINE force_all_caps AA_flags,6 ; =1: force output all caps (even if there is a 0-9 in the string) |
| 623 | 829 ; AA_flags,7 ; --- unused |
| 830 | |
| 831 | |
| 634 | 832 ;---- Convert Functions (Control of numerical Output) |
| 833 | |
| 834 #DEFINE hide_digit5 CVT_flags1,0 ; =1: do not print digit 5 (clip output at 9999) | |
| 835 #DEFINE hide_digit4 CVT_flags1,1 ; =1: do not print digits 5-4 (clip output at 999) | |
| 836 #DEFINE hide_digit3 CVT_flags1,2 ; =1: do not print digits 5-3 (clip output at 99) | |
| 837 #DEFINE hide_digit2 CVT_flags1,3 ; =1: do not print digits 5-2 (clip output at 9) | |
| 838 #DEFINE omit_digit_1 CVT_flags1,4 ; =1: do not print digit 1 (show output as xxxx-) | |
| 839 #DEFINE omit_digit_2 CVT_flags1,5 ; =1: do not print digits 2-1 (show output as xxx--) | |
| 631 | 840 ; CVT_flags1,6 ; --- unused |
| 623 | 841 ; CVT_flags1,7 ; --- unused |
| 0 | 842 |
| 634 | 843 #DEFINE decimal_digit1 CVT_flags2,0 ; =1: put a decimal point in front of digit 1 |
| 844 #DEFINE decimal_digit2 CVT_flags2,1 ; =1: put a decimal point in front of digit 2 | |
| 845 #DEFINE decimal_digit3 CVT_flags2,2 ; =1: put a decimal point in front of digit 3 | |
| 846 ; CVT_flags2,3 ; --- unused | |
| 847 #DEFINE leftbind CVT_flags2,4 ; =1: align output to the left (no leading spaces) | |
| 848 #DEFINE leading_zeros CVT_flags2,5 ; =1: print leading zeros | |
| 849 #DEFINE output_overflow CVT_flags2,6 ; =1: the printed number is clipped to 9999/999/99/9 | |
| 850 ; CVT_flags2,7 ; --- unused | |
| 623 | 851 |
| 852 | |
| 631 | 853 ;---- Miscellaneous Flags |
| 623 | 854 #DEFINE ignore_last_edited_gas misc_flags,0 ; =1: ignore last edited gas while cleaning up gas/dil list |
| 855 #DEFINE copying_dil misc_flags,1 ; =1: copying a diluent | |
| 631 | 856 #DEFINE comm_service_mode misc_flags,2 ; =1: service mode (extended command set) is enabled |
| 857 #DEFINE waypoint_reached_first misc_flags,3 ; =1: the first (most outside) waypoint is reached (cave mode) | |
| 858 #DEFINE waypoint_reached_last misc_flags,4 ; =1: the last (most inside) waypoint is reached (cave mode) | |
| 634 | 859 #DEFINE option_value_ok misc_flags,5 ; =1: option value was checked to be within min/max limits |
| 860 #DEFINE aux_flag misc_flags,6 ; local flag, used in various places | |
| 861 #DEFINE neg_flag misc_flags,7 ; =1: result is negative | |
| 862 | |
| 623 | 863 |
| 864 ;---- HUD Status Byte (stored in access RAM) | |
| 604 | 865 #DEFINE hud_connection_ok hud_status_byte,0 ; =1 HUD connection ok |
| 866 ; hud_status_byte,1 ; =1 HUD is calibrated | |
| 623 | 867 ; hud_status_byte,2 ; =1 HUD battery is low (< 3000 mV) |
| 604 | 868 #DEFINE sensor1_active hud_status_byte,3 ; =1: sensor 1 is active |
| 869 #DEFINE sensor2_active hud_status_byte,4 ; =1: sensor 2 is active | |
| 870 #DEFINE sensor3_active hud_status_byte,5 ; =1: sensor 3 is active | |
| 871 ; hud_status_byte,6 ; --- unused in stand-alone HUD | |
| 872 ; hud_status_byte,7 ; --- unused in stand-alone HUD | |
| 0 | 873 |
| 582 | 874 |
| 634 | 875 ;----------------------------------------------------------------------------- |
| 876 ; Macros | |
| 877 ;----------------------------------------------------------------------------- | |
| 582 | 878 |
| 634 | 879 ; ---- options checking |
| 631 | 880 |
| 623 | 881 TSTOSS macro opt_reg ; TeST Option Skip next instruction if Set (not zero) |
| 631 | 882 movff opt_reg,EEDATA ; Attention: destroys EEDATA! |
| 643 | 883 tstfsz EEDATA ; Attention: must be followed by a plain machine |
| 623 | 884 bra $+4 ; command, do not let follow a macro! |
| 885 endm ; | |
| 886 | |
| 887 TSTOSC macro opt_reg ; TeST Option Skip next instruction if Clear (zero) | |
| 631 | 888 movff opt_reg,EEDATA ; Attention: destroys EEDATA! |
| 643 | 889 tstfsz EEDATA ; Attention: must be followed by a plain machine |
| 623 | 890 endm ; command, do not let follow a macro! |
| 891 | |
| 892 | |
| 634 | 893 ; ---- literal operations |
| 631 | 894 |
| 895 CLRI macro address ; CLeaR Integer (version of clrf for 2 byte integers) | |
| 896 clrf address+0 ; Attention: must be in bank where target variable resides! | |
| 897 clrf address+1 ; | |
| 898 endm ; | |
| 899 | |
| 900 CLRT macro address ; CLeaR Three byte integer (version of clrf for 3 byte integers) | |
| 901 clrf address+0 ; Attention: must be in bank where target variable resides! | |
| 902 clrf address+1 ; | |
| 903 clrf address+2 ; | |
| 623 | 904 endm ; |
| 905 | |
| 631 | 906 CLRR macro address,range ; CLeaR a Range of bytes (version of clrf for 1-256 bytes) |
| 907 movlw low(range) ; initialize loop counter | |
| 908 lfsr FSR1,address ; set start address | |
| 909 extern memory_clear | |
| 910 call memory_clear | |
| 911 endm | |
| 623 | 912 |
| 631 | 913 SETI macro address ; SET Integer (version of setf for 2 byte integers) |
| 914 setf address+0 ; Attention: must be in bank where target variable resides! | |
| 915 setf address+1 ; | |
| 623 | 916 endm ; |
| 917 | |
| 631 | 918 MOVLI macro literal,address ; MOVe Literal to Integer |
| 919 movlw LOW (literal) ; Attention: destroys WREG! | |
| 920 movwf address+0 ; Attention: must be in bank where target variable resides! | |
| 921 movlw HIGH (literal) ; | |
| 922 movwf address+1 ; | |
| 623 | 923 endm ; |
| 924 | |
| 925 | |
| 657 | 926 ; ---- arithmetics |
| 631 | 927 |
| 928 INCI macro address ; INCrement Integer (version of incf for 2 byte integers) | |
| 929 infsnz address+0,F ; Attention: must be in bank where target variable resides! | |
| 930 incf address+1,F ; | |
| 623 | 931 endm ; |
| 932 | |
| 631 | 933 DECI macro address ; DECrement Integer (version of decf for 2 byte integers) |
| 623 | 934 movlw .1 ; Attention: destroys WREG! |
| 631 | 935 subwf address+0,F ; Attention: must be in bank where target variable resides! |
| 623 | 936 movlw .0 ; |
| 631 | 937 subwfb address+1,F ; |
| 938 endm ; | |
| 939 | |
| 940 ADDLI macro literal, address ; ADD Literal to Integer | |
| 941 movlw LOW (literal) ; Attention: destroys WREG! | |
| 942 addwf address+0,F ; Attention: must be in bank where target variable resides! | |
| 943 movlw HIGH (literal) ; | |
| 944 addwfc address+1,F ; | |
| 945 endm ; | |
| 946 | |
| 947 SUBLI macro literal, address ; SUBtract Literal from Integer | |
| 948 movlw LOW (literal) ; Attention: destroys WREG! | |
| 949 subwf address+0,F ; Attention: must be in bank where target variable resides! | |
| 950 movlw HIGH (literal) ; | |
| 951 subwfb address+1,F ; | |
| 623 | 952 endm ; |
| 953 | |
| 954 | |
| 634 | 955 ; ---- moves |
| 631 | 956 |
| 957 MOVCC macro from,to ; MOVe 1 byte Char (actually an alias for movff) | |
| 958 movff from,to | |
| 959 endm | |
| 960 | |
| 961 MOVII macro from,to ; MOVe 2 byte Integer (version of movff for 2 bytes) | |
| 962 movff from+0,to+0 ; copy 1st byte | |
| 963 movff from+1,to+1 ; copy 2nd byte | |
| 623 | 964 endm ; |
| 965 | |
| 631 | 966 MOVTT macro from,to ; MOVe Three byte Integer (version of movff for 3 bytes) |
| 967 movff from+0,to+0 ; copy 1st byte | |
| 968 movff from+1,to+1 ; copy 2nd byte | |
| 969 movff from+2,to+2 ; copy 3rd byte | |
| 970 endm ; | |
| 971 | |
| 972 MOVRR macro from,to,range ; MOVe a Range of bytes (version of movff for 1-256 bytes) | |
| 973 movlw low(range) ; initialize loop counter | |
| 974 lfsr FSR1,from ; from | |
| 975 lfsr FSR2,to ; to | |
| 976 extern memory_move | |
| 977 call memory_move | |
| 978 endm | |
| 979 | |
| 623 | 980 |
| 634 | 981 ; ---- ISR-safe moves |
| 623 | 982 |
| 631 | 983 SMOVII macro from, to ; isr-Safe MOVe 2 byte Integer (version of MOVII for ISR-safe copying) |
| 623 | 984 local retry ; |
| 985 retry: | |
| 986 bcf trigger_isr_updates ; clear flag, it will be set by the ISR in case it had kicked in | |
| 987 movff from+0,to+0 ; copy low byte | |
| 988 movff from+1,to+1 ; copy high byte | |
| 989 btfsc trigger_isr_updates ; did the ISR kicked in since we cleared the flag? | |
| 990 bra retry ; YES - retry copy | |
| 991 endm ; NO - done | |
| 992 | |
| 631 | 993 SMOVTT macro from, to ; isr-Safe MOVe Three byte integer (version of MOVTT for ISR-safe copying) |
| 623 | 994 local retry ; |
| 995 retry: | |
| 996 bcf trigger_isr_updates ; clear flag, it will be set by the ISR in case it had kicked in | |
| 997 movff from+0,to+0 ; copy low byte | |
| 998 movff from+1,to+1 ; copy high byte | |
| 999 movff from+2,to+2 ; copy upper byte | |
| 1000 btfsc trigger_isr_updates ; did the ISR kicked in since we cleared the flag? | |
| 1001 bra retry ; YES - retry copy | |
| 1002 endm ; NO - done | |
| 1003 | |
| 631 | 1004 SMOVQQ macro from, to ; isr-Safe MOVe Quad byte integer (version of MOVII for ISR-safe copying) |
| 623 | 1005 local retry ; |
| 1006 retry: | |
| 1007 bcf trigger_isr_updates ; clear flag, it will be set by the ISR in case it had kicked in | |
| 1008 movff from+0,to+0 ; copy byte 0 (LSB) | |
| 1009 movff from+1,to+1 ; copy byte 1 | |
| 1010 movff from+2,to+2 ; copy byte 2 | |
| 1011 movff from+3,to+3 ; copy byte 3 (MSB) | |
| 1012 btfsc trigger_isr_updates ; did the ISR kicked in since we cleared the flag? | |
| 1013 bra retry ; YES - retry copy | |
| 1014 endm ; NO - done | |
| 1015 | |
| 1016 SMOVSS macro from, to ; isr-Safe MOVe Six byte integer to integer (version of MOVII for integers updated in ISR) | |
| 1017 local retry ; | |
| 1018 retry: | |
| 1019 bcf trigger_isr_updates ; clear flag, it will be set by the ISR in case it had kicked in | |
| 1020 movff from+0,to+0 ; copy byte 0 (LSB) | |
| 1021 movff from+1,to+1 ; copy byte 1 | |
| 1022 movff from+2,to+2 ; copy byte 2 | |
| 1023 movff from+3,to+3 ; copy byte 3 | |
| 1024 movff from+4,to+4 ; copy byte 4 | |
| 1025 movff from+5,to+5 ; copy byte 5 (MSB) | |
| 1026 btfsc trigger_isr_updates ; did the ISR kicked in since we cleared the flag? | |
| 1027 bra retry ; YES - retry copy | |
| 1028 endm ; NO - done | |
| 1029 | |
| 582 | 1030 |
| 634 | 1031 ;----------------------------------------------------------------------------- |
| 1032 ; C-Code Routines | |
| 1033 ;----------------------------------------------------------------------------- | |
| 582 | 1034 |
| 1035 extern deco_calc_desaturation_time | |
| 1036 extern deco_calc_hauptroutine | |
| 604 | 1037 extern deco_calc_dive_interval |
| 582 | 1038 extern deco_calc_dive_interval_1min |
| 1039 extern deco_calc_dive_interval_10min | |
| 1040 extern deco_clear_tissue | |
| 623 | 1041 extern deco_init_output_vars |
| 582 | 1042 extern deco_pull_tissues_from_vault |
| 1043 extern deco_push_tissues_to_vault | |
| 560 | 1044 |
| 1045 | |
| 634 | 1046 ;----------------------------------------------------------------------------- |
| 1047 ; Bank0 ACCESS RAM | |
| 1048 ;----------------------------------------------------------------------------- | |
| 623 | 1049 |
| 1050 ; Variables located in the Access Bank are declared in hwos.asm | |
| 1051 | |
| 634 | 1052 ifndef INSIDE_HWOS_ASM |
| 623 | 1053 |
| 1054 extern HW_descriptor | |
| 1055 extern HW_variants | |
| 643 | 1056 extern HW_variants2 |
| 656 | 1057 extern HW_variants3 |
| 623 | 1058 |
| 628 | 1059 extern HW_flags_state1 |
| 1060 extern HW_flags_state2 | |
| 643 | 1061 extern HW_flags_state3 |
| 623 | 1062 |
| 1063 extern OS_flags_persist | |
| 1064 extern OS_flags_ISR1 | |
| 1065 extern OS_flags_ISR2 | |
| 1066 | |
| 1067 extern OM_flags_mode | |
| 1068 | |
| 1069 extern DM_flags_deco | |
| 1070 | |
| 1071 extern cpu_speed_request | |
| 1072 extern cpu_speed_state | |
| 1073 | |
| 1074 extern timebase | |
| 1075 extern eventbase | |
| 604 | 1076 |
| 623 | 1077 extern isr_timeout_timer |
| 1078 extern isr_timeout_reload | |
| 1079 | |
| 1080 extern total_divetime_secs | |
| 1081 extern counted_divetime_mins | |
| 1082 extern counted_divetime_secs | |
| 1083 | |
| 1084 extern apnoe_surface_secs | |
| 1085 extern apnoe_surface_mins | |
| 1086 extern apnoe_dive_secs | |
| 1087 extern apnoe_dive_mins | |
| 1088 | |
| 1089 extern sampling_rate | |
| 1090 extern sampling_timer | |
| 1091 | |
| 1092 extern simulatormode_depth | |
| 1093 | |
| 1094 extern hud_status_byte | |
| 1095 extern hud_battery_mv | |
| 1096 | |
| 634 | 1097 extern battery_capacity_internal |
| 1098 extern battery_capacity | |
| 1099 extern battery_offset | |
| 1100 extern battery_type | |
| 1101 extern battery_accumulated_charge | |
| 1102 extern battery_temperature | |
| 656 | 1103 |
| 634 | 1104 |
| 631 | 1105 endif ; ACCESS_RAM_VARS |
| 623 | 1106 |
| 634 | 1107 ;----------------------------------------------------------------------------- |
| 1108 ; Bank0 NORMAL RAM | |
| 1109 ;----------------------------------------------------------------------------- | |
| 1110 | |
| 623 | 1111 isr_backup equ 0x060 ; Alias for "banksel isr_backup" |
| 1112 isr_backup udata_ovr isr_backup ; Bank 0 ISR data | |
| 604 | 1113 |
| 631 | 1114 ;---- Backup for general Registers, used by ISR Routines |
| 623 | 1115 PROD_backup res 2 |
| 1116 FSR0_backup res 2 | |
| 1117 BSR_backup res 1 | |
| 1118 | |
| 631 | 1119 ;---- Multi-Purpose Registers, used by ISR Routines |
| 623 | 1120 isr_mpr res 2 ; used in ms5541.asm and isr.asm |
| 631 | 1121 #DEFINE isr_lo isr_mpr+0 ; ... |
| 1122 #DEFINE isr_hi isr_mpr+1 ; ... | |
| 1123 | |
| 1124 ;---- Multi-Purpose Registers, NOT USED by ISR Routines | |
| 1125 backup_mpr res 2 ; used in rtc.asm | |
| 1126 #DEFINE backup_lo backup_mpr+0 | |
| 1127 #DEFINE backup_hi backup_mpr+1 | |
| 1128 | |
| 623 | 1129 |
| 1130 ;---- Time and Date - Real Time Clock | |
| 1131 rtc_year res 1 ; running year | Attention: | |
| 1132 rtc_month res 1 ; running month | do not change | |
| 1133 rtc_day res 1 ; running day | the Position of | |
| 1134 rtc_hour res 1 ; running hour | these Variables | |
| 1135 rtc_mins res 1 ; running minute | relative to | |
| 1136 rtc_secs res 1 ; running second | each other! | |
| 582 | 1137 |
| 623 | 1138 rtc_latched_year res 1 ; latched year | Attention: |
| 1139 rtc_latched_month res 1 ; latched month | do not change | |
| 1140 rtc_latched_day res 1 ; latched day | the Position of | |
| 1141 rtc_latched_hour res 1 ; latched hour | these Variables | |
| 1142 rtc_latched_mins res 1 ; latched minute | relative to | |
| 1143 rtc_latched_secs res 1 ; latched second | each other! | |
| 1144 | |
| 1145 ;--- RTC-independent Timebase | |
| 1146 timebase_mins res 1 ; RTC-independent timer for generating the every hour trigger | |
| 1147 timebase_secs res 1 ; RTC-independent timer for generating the every minute trigger | |
| 1148 | |
| 1149 ;---- other Timers | |
| 1150 uptime res 4 ; [sec] uptime of the OSTC since last cold start | |
| 629 | 1151 surface_interval_secs res 4 ; [sec] surface interval counted in seconds |
| 1152 surface_interval_mins res 2 ; [min] surface interval counted in minutes | |
| 623 | 1153 simulator_time res 1 ; [min] real runtime of the simulator |
| 1154 | |
| 1155 ;---- Data for Pressure and Temperature Calculation (MS5541) | |
| 1156 clock_count res 1 ; I2C clock pulse counter | |
| 1157 sensor_state_counter res 1 ; counter for pressure sensor state machine | |
| 1158 dLSB res 1 ; pressure sensor interface, LSB | |
| 1159 dMSB res 1 ; pressure sensor interface, MSB | |
| 1160 dbuffer res 1 ; pressure sensor interface, RX/TX buffer | |
| 582 | 1161 |
| 643 | 1162 C1 res 2 ; decoded calibration data |
| 1163 C2 res 2 ; decoded calibration data | |
| 1164 C3 res 2 ; decoded calibration data | |
| 1165 C4 res 2 ; decoded calibration data, here C4-250 | |
| 1166 C5 res 2 ; decoded calibration data, here reference temperature UT1 = 8*C5 + 10000 (u16 range 10.000 .. +42.760) | |
| 1167 C6 res 2 ; decoded calibration data | |
| 1168 D1 res 3 ; raw pressure | |
| 1169 D2 res 3 ; raw temperature | |
| 1170 xdT res 3 | |
| 582 | 1171 xdT2 res 2 |
| 643 | 1172 OFF res 4 |
| 1173 SENS res 4 | |
| 623 | 1174 |
| 1175 temperature_cur res 2 ; current temperature | |
| 1176 temperature_min res 2 ; minimum temperature (operated by divemode.asm) | |
| 1177 temperature_avg res 2 ; internal register used for averaging | |
| 1178 temperature_last res 2 ; internal register used for detecting changes | |
| 1179 | |
| 1180 pressure_abs res 2 ; current absolute pressure | |
| 643 | 1181 pressure_abs_avg res 3 ; internal register used for averaging |
| 623 | 1182 pressure_abs_last res 2 ; internal register used for detecting pressure changes |
| 1183 | |
| 1184 pressure_abs_sampled res 2 ; sampled surface pressure, sampled in sleep mode every 15 minutes | |
| 1185 pressure_abs_ref res 2 ; reference surface pressure, surface pressure sampled 15 minutes ago | |
| 1186 pressure_surf res 2 ; surface pressure used by ISR to calculate relative pressures | |
| 1187 | |
| 1188 pressure_rel_cur res 2 ; current relative pressure | |
| 1189 pressure_rel_max res 2 ; maximum relative pressure | |
| 1190 pressure_rel_sim res 2 ; simulated relative pressure (simulator mode) | |
| 582 | 1191 |
| 604 | 1192 ;---- Data for ISR Math Subroutines |
| 643 | 1193 isr_xA res 4 ; multiplicand 1 |
| 1194 isr_xB res 3 ; multiplicand 2 | |
| 1195 isr_xC res 7 ; resulting product | |
| 1196 isr_math_loop res 1 ; loop counter | |
| 582 | 1197 |
| 604 | 1198 ;---- Display Brightness |
| 623 | 1199 ambient_light res 2 ; ambient light level |
| 604 | 1200 max_CCPR1L res 1 ; max. brightness value for CCPR1L |
| 582 | 1201 |
| 604 | 1202 ;---- Battery Gauge (nAs, nC) |
| 1203 battery_gauge res 6 ; 48 bit -> 78 Ah max | |
| 582 | 1204 |
| 656 | 1205 ;---- MS5541 raw calibration data |
| 1206 ms5541_rawdata res 8 | |
| 1207 | |
| 1208 IFDEF _external_sensor_eccr | |
| 582 | 1209 ir_s8_counter res 1 |
| 604 | 1210 ir_s8_timeout res 1 ; timeout for valid data |
| 623 | 1211 ENDIF |
| 582 | 1212 |
| 623 | 1213 ;---- raw O2 Sensor Data received on S8 Link |
| 656 | 1214 IFDEF _external_sensor_eccr |
| 623 | 1215 s8_rawdata_sensor1 res 3 ; 24 bit A/D raw data from S8 HUD sensor 1 |
| 1216 s8_rawdata_sensor2 res 3 ; 24 bit A/D raw data from S8 HUD sensor 2 | |
| 1217 s8_rawdata_sensor3 res 3 ; 24 bit A/D raw data from S8 HUD sensor 3 | |
| 656 | 1218 ccr_status_byte res 2 ; Status bytes for ccr |
| 623 | 1219 ENDIF |
| 582 | 1220 |
| 623 | 1221 ;---- Switch Processing (8 byte, called by ISR and sleep mode) |
| 1222 analog_sw1_raw res 2 ; idle values (average) | |
| 1223 analog_sw2_raw res 2 ; idle values (average) | |
| 1224 analog_counter res 1 ; for averaging | |
| 1225 analog_sw1 res 1 ; analog value for switch 1 | |
| 1226 analog_sw2 res 1 ; analog value for switch 2 | |
| 1227 button_polarity res 1 ; 0xFF (both normal), 0x00 (both inverted), 0x01 (left inverted only), 0x02 (right inverted only) | |
| 582 | 1228 |
| 631 | 1229 |
| 623 | 1230 ;--- resettable min and max Depth Option |
| 1231 IFDEF _min_depth_option | |
| 1232 pressure_rel_min_trip res 2 ; resettable minimum relative pressure | |
| 1233 pressure_rel_max_trip res 2 ; resettable maximum relative pressure | |
| 1234 ENDIF | |
| 640 | 1235 |
| 1236 debounce_counter res 1 ; multiples of 16ms | |
| 643 | 1237 isr_tmr7_helper res 1 ; used for 1/4 second trigger |
| 1238 | |
| 656 | 1239 ; 150 byte used, 10 byte free |
| 560 | 1240 |
| 634 | 1241 |
| 1242 ;----------------------------------------------------------------------------- | |
| 1243 ; Common DATA | |
| 1244 ;----------------------------------------------------------------------------- | |
| 1245 | |
| 623 | 1246 common equ 0x100 ; Alias for "banksel common" |
| 1247 common udata_ovr common ; Bank 1 general variables | |
| 582 | 1248 |
| 623 | 1249 ;---- Multi-Purpose Register for Data Storage and Interface with Conversion and Display Functions (6 byte) |
| 1250 mpr res 6 ; will be used as base address of 1, 2, 3, 4 and 6 byte buffers | |
| 1251 #DEFINE lo mpr+0 ; nickname for "low" | |
| 1252 #DEFINE hi mpr+1 ; nickname for "high" | |
| 1253 #DEFINE up mpr+2 ; nickname for "upper" | |
| 1254 #DEFINE ex mpr+3 ; nickname for "extra" | |
| 1255 #DEFINE ul mpr+4 ; nickname for "ultra" | |
| 1256 #DEFINE hy mpr+5 ; nickname for "hyper" | |
| 1257 | |
| 582 | 1258 |
| 623 | 1259 ;---- Flags - Menu System (2 byte) |
| 1260 MS_flags_control res 1 ; menu system - control | |
| 1261 MS_flags_imprint res 1 ; menu system - data imprinting | |
| 582 | 1262 |
| 634 | 1263 ;---- Flags - Dive Mode (21 byte) |
| 623 | 1264 DM_flags_state res 1 ; dive mode - dive states |
| 1265 DM_flags_sensor res 1 ; dive mode - O2 sensors | |
| 631 | 1266 DM_flags_request res 1 ; dive mode - user requests / general |
| 623 | 1267 DM_flags_event res 1 ; dive mode - data recording events |
| 1268 DM_flags_layout1 res 1 ; dive mode - display control / layout (1) | |
| 1269 DM_flags_layout2 res 1 ; dive mode - display control / layout (2) | |
| 631 | 1270 DM_flags_layout3 res 1 ; dive mode - display control / layout (3) |
| 623 | 1271 DM_flags_message res 1 ; dive mode - display control / messages |
| 1272 DM_flags_gas_dil res 1 ; dive mode - display control / gas, diluent | |
| 634 | 1273 DM_flags_advc_det res 1 ; dive mode - advices detected |
| 1274 DM_flags_advc_ack res 1 ; dive mode - advices acknowledged | |
| 1275 DM_flags_att1_det res 1 ; dive mode - attentions detected (1) | |
| 1276 DM_flags_att2_det res 1 ; dive mode - attentions detected (2) | |
| 1277 DM_flags_att3_det res 1 ; dive mode - attentions detected (3) | |
| 1278 DM_flags_att1_ack res 1 ; dive mode - attentions acknowledged (1) | |
| 1279 DM_flags_att2_ack res 1 ; dive mode - attentions acknowledged (2) | |
| 1280 DM_flags_att3_ack res 1 ; dive mode - attentions acknowledged (3) | |
| 1281 DM_flags_war1_det res 1 ; dive mode - warnings detected (1) | |
| 1282 DM_flags_war2_det res 1 ; dive mode - warnings detected (2) | |
| 1283 DM_flags_war1_ack res 1 ; dive mode - warnings acknowledged (1) | |
| 1284 DM_flags_war2_ack res 1 ; dive mode - warnings acknowledged (2) | |
| 1285 DM_flags_shown1 res 1 ; dive mode - custom views shown (1) | |
| 1286 DM_flags_shown2 res 1 ; dive mode - custom views shown (2) | |
| 1287 DM_flags_shown3 res 1 ; dive mode - custom views shown (3) | |
| 623 | 1288 |
| 1289 ;---- Miscellaneous Flags (1 byte) | |
| 1290 misc_flags res 1 | |
| 1291 | |
| 634 | 1292 ;---- Interface to Graphic Functions (11 byte) |
| 582 | 1293 win_leftx2 res 1 |
| 1294 win_top res 1 | |
| 1295 win_width res 2 | |
| 1296 win_height res 1 | |
| 623 | 1297 win_bargraph res 1 ; width of the bargraph bar |
| 1298 win_color1 res 1 ; 2 byte color | |
| 1299 win_color2 res 1 ; 2 byte color | |
| 1300 win_color3 res 1 ; 3 byte color used for display 2 | |
| 1301 win_color4 res 1 ; 3 byte color used for display 2 | |
| 1302 win_color5 res 1 ; 3 byte color used for display 2 | |
| 560 | 1303 |
| 623 | 1304 ;---- Interface to Math Functions (16 byte) |
| 582 | 1305 divA res 2 |
| 1306 xA res 2 | |
| 1307 xB res 2 | |
| 623 | 1308 xC res 4 |
| 582 | 1309 sub_a res 2 |
| 1310 sub_b res 2 | |
| 623 | 1311 sub_c res 2 |
| 582 | 1312 |
| 631 | 1313 ;---- Menu System and Views (5 byte) |
| 623 | 1314 menu_pos_cur res 1 ; current position in main menu |
| 1315 menu_pos_max res 1 ; highest position in main menu | |
| 1316 active_premenu res 1 ; currently shown pre-menu (0: none) | |
| 631 | 1317 active_customview res 1 ; currently shown custom view |
| 1318 backup_customview res 1 ; previously shown custom view | |
| 623 | 1319 |
| 1320 ;---- Miscellaneous (6 byte) | |
| 1321 batt_voltage res 2 ; battery voltage in mV (no ISR involved) | |
| 1322 batt_percent res 1 ; battery in percent (1-100%) | |
| 604 | 1323 message_counter res 1 ; counts amount of messages |
| 623 | 1324 message_page res 1 ; current message page number |
| 604 | 1325 pairing_slot res 1 ; slot number, used in transmitter pairing |
| 1326 | |
| 634 | 1327 |
| 631 | 1328 ;---- Dive Mode / all modes (26 byte) |
| 623 | 1329 divesecs_avg_trip res 2 ; time accumulator for the resettable average depth & stopwatch |
| 1330 divesecs_avg_total res 2 ; time accumulator for the total dive average depth | |
| 656 | 1331 divesecs_compass_trip res 2 ; time accumulator for the compass stopwatch |
| 623 | 1332 pressure_rel_avg_trip res 2 ; calculated resettable average depth |
| 1333 pressure_rel_avg_total res 2 ; calculated total dive average depth | |
| 1334 pressure_rel_cur_cached res 2 ; cached current relative pressure | |
| 1335 pressure_rel_max_cached res 2 ; cached maximum relative pressure | |
| 1336 pressure_abs_cached res 2 ; cached current absolute pressure | |
| 1337 pressure_abs_10 res 2 ; cached current absolute pressure divided by 10 | |
| 1338 depth_meter res 1 ; current depth in meters | |
| 1339 safety_stop_countdown res 1 ; counter for safety stop | |
| 1340 dive_timeout_timer res 2 ; timeout timer for leaving dive mode after surfacing | |
| 582 | 1341 gaslist_gas res 1 ; used for transfer between gaslist.asm and menu_tree.asm |
| 604 | 1342 best_gas_number res 1 ; number of the "best gas": 0= none found, 1-5= gases 1-5, 255= not computed |
| 623 | 1343 active_gas res 1 ; the currently used OC/bailout gas (1-5) |
| 640 | 1344 dive_ccr_mode res 1 ; working copy of opt_ccr_mode while the dive |
| 645 | 1345 dive_threshold_debounce res 1 ; Countdown for entering dive mode |
| 1346 | |
| 623 | 1347 IFDEF _ccr_pscr |
| 604 | 1348 best_dil_number res 1 ; number of the "best dil": 0= none found, 1-5= dils 1-5, 255= not computed |
| 1349 active_dil res 1 ; the currently used diluent (1-5) | |
| 623 | 1350 ENDIF |
| 1351 | |
| 631 | 1352 IFDEF _cave_mode |
| 1353 DM_flags_cavereq res 1 ; dive mode - user requests / cave mode | |
| 1354 backtrack_deltatime res 1 ; time elapsed since last depth recording in seconds | |
| 1355 backtrack_waypoint_num res 1 ; current waypoint number | |
| 1356 backtrack_waypoint_turn res 1 ; waypoint number of the turn point | |
| 1357 ENDIF | |
| 1358 | |
| 654 | 1359 ;---- Dive Mode / apnoe mode (3 byte) |
| 623 | 1360 apnoe_max_pressure res 2 ; max depth over all dives in the series |
| 654 | 1361 apnoe_dive_counter res 1 ; apnoe #dive counter |
| 560 | 1362 |
| 623 | 1363 ;---- Profile Recording (6 byte) |
| 634 | 1364 alarm_type res 1 ; alarm states recording |
| 1365 event_byte1 res 1 ; events recording | |
| 1366 event_byte2 res 1 ; events recording | |
| 623 | 1367 CNS_start res 2 ; CNS value at beginning of dive |
| 560 | 1368 |
| 631 | 1369 ;---- External Flash (14 byte) |
| 582 | 1370 ext_flash_address res 3 ; 24 bit address |
| 631 | 1371 ext_flash_length_counter res 3 ; 24 bit length counter |
| 582 | 1372 ext_flash_log_pointer res 3 ; 24 bit address for logbook profile storing |
| 1373 ext_flash_end_pointer res 3 ; 24 bit address for logbook profile storing | |
| 631 | 1374 ext_flash_rw res 1 ; transfer register for data read / write |
| 634 | 1375 ext_flash_address_limit res 1 ; wrap-around threshold while address incrementing |
| 560 | 1376 |
| 1377 | |
| 634 | 1378 ;------------------------------------------------------------------------------- |
| 1379 ; private Variables - do not access from outside of the respective source files! | |
| 1380 ;------------------------------------------------------------------------------- | |
| 560 | 1381 |
| 634 | 1382 ;---- aa_wordprocessor.asm, strings.asm & Co. |
| 623 | 1383 AA_flags res 1 ; various flags for aa_wordprocessor and strings |
| 582 | 1384 aa_bitlen res 1 ; count of pixels when decoding bitmaps |
| 623 | 1385 aa_start res 2 ; PROM pointer to start of encoded bitmap |
| 582 | 1386 aa_end res 2 ; and end of it |
| 1387 aa_temp res 2 ; current color, divided by 2 or 4 | |
| 634 | 1388 font_color res 1 ; selected font color |
| 1389 font_size res 1 ; selected font size | |
| 1390 pallet_color_mask res 1 ; pallet color - mask | Attention: | |
| 1391 pallet_color_disabled res 1 ; pallet color - disabled | do not change | |
| 1392 pallet_color_memo res 1 ; pallet color - memo | the relative | |
| 1393 pallet_color_advice res 1 ; pallet color - advice | position of | |
| 1394 pallet_color_attention res 1 ; pallet color - attention | these vars! | |
| 1395 pallet_color_warning res 1 ; pallet color - warning | | |
| 1396 | |
| 582 | 1397 |
| 1398 ;--- adc_lightsensor.asm | |
| 623 | 1399 get_bat_volt_counter res 1 ; counter for reading the charger chip |
| 582 | 1400 |
| 1401 ;---- convert.asm | |
| 623 | 1402 CVT_flags1 res 1 |
| 1403 CVT_flags2 res 1 | |
| 634 | 1404 bcd_lo res 1 |
| 1405 bcd_hi res 1 | |
| 1406 bcd_up res 1 | |
| 1407 bin_lo res 1 | |
| 1408 bin_hi res 1 | |
| 582 | 1409 |
| 1410 ;---- color_processor.asm | |
| 623 | 1411 overall_pixels res 3 ; used by color_processor.asm |
| 1412 pixel_count res 2 ; used by color_processor.asm | |
| 1413 encoding_format res 1 ; image encoding format | |
| 1414 | |
| 1415 ;---- compass_ops.asm | |
| 1416 compass_flags res 1 ; flags are defined in compass_ops.asm | |
| 582 | 1417 |
| 1418 ;---- comm.asm | |
| 623 | 1419 comm_timeout_timer res 1 ; timeout for communication |
| 582 | 1420 |
| 1421 ;---- eeprom_rs232.asm | |
| 631 | 1422 eeprom_loop res 1 ; loop counter (actually used in flash and serial, too) |
| 634 | 1423 rx_timeout_tmr5h_load res 1 ; TMR5H load value for RS232 RX timeout |
| 582 | 1424 |
| 1425 ;---- i2c.asm | |
| 1426 i2c_temp1 res 1 ; temporary data | |
| 1427 i2c_temp2 res 1 ; temporary data | |
| 1428 | |
| 623 | 1429 ;---- math.asm |
| 1430 math_loop res 1 ; loop counter | |
| 1431 | |
| 582 | 1432 ;---- menu_processor.asm |
| 623 | 1433 menustack_pointer res 1 ; pointer to menu stack |
| 634 | 1434 menu_item_start res 1 ; index of the first menu item (scrolling) |
| 1435 menu_item_curr res 1 ; index of the current menu item (loop counter) | |
| 1436 menu_item_count res 1 ; total number of menu items | |
| 582 | 1437 selected_item res 1 ; index of the current item |
| 634 | 1438 menu_title_addr res 2 ; address of the multi-lingual menu titel |
| 1439 menu_item_data_start res 3 ; base address of the menu item data blocks | |
| 1440 menu_vertical_start res 1 ; vertical start position of 1st menu item | |
| 1441 item_type res 1 ; type of the menu item | |
| 1442 item_title_addr res 2 ; address of item title function or title text | |
| 1443 item_funct_addr res 2 ; address of item call function or option definition data | |
| 1444 | |
| 582 | 1445 |
| 1446 ;---- options.asm | |
| 634 | 1447 #DEFINE opt_definition_bytes .12 ; | Attention: do not change the relative position of these vars! |
| 631 | 1448 opt_type res 1 ; | option type |
| 1449 opt_serial res 1 ; | index used for option read/write via RS232 | |
| 634 | 1450 opt_inc res 1 ; | increment value, also used for enum low and low (pointer to default string) |
| 1451 opt_min res 1 ; | minimum value, also used for enum high and high(pointer to default string) | |
| 1452 opt_max res 1 ; | maximum value, also used for length( default string) | |
| 631 | 1453 opt_default res 1 ; | default value |
| 1454 opt_unit res 2 ; | pointer to multi-lingual unit text | |
| 1455 opt_memory res 2 ; | pointer to memory position | |
| 1456 opt_eeprom_index res 1 ; | pointer to EEPROM position (index) | |
| 1457 opt_eeprom_bank res 1 ; | pointer to EEPROM position (bank) | |
| 1458 opt_end_token res 1 ; | =0xFF: end of table reached (does not count into opt_definiton_bytes) | |
| 1459 | |
| 582 | 1460 |
| 1461 ;---- tft.asm | |
| 623 | 1462 tft_save_top res 1 |
| 1463 tft_save_height res 1 | |
| 1464 tft_save_left res 1 | |
| 1465 tft_save_width res 1 | |
| 582 | 1466 tft_temp1 res 1 |
| 1467 tft_temp2 res 1 | |
| 1468 tft_temp3 res 1 | |
| 1469 tft_temp4 res 1 | |
| 1470 | |
| 623 | 1471 ;---- dump screen Function |
| 604 | 1472 IFDEF _screendump |
| 623 | 1473 ds_line res 1 ; current line (0..239) |
| 1474 ds_column res 1 ; current columnx2 (0..159) | |
| 1475 ds_pixel res 2 ; current pixel color | |
| 1476 ds_count res 1 ; repetition count | |
| 604 | 1477 ENDIF |
| 1478 | |
| 582 | 1479 ;---- wait.asm |
| 1480 wait_counter res 1 | |
| 1481 | |
| 634 | 1482 ;---- tft_outputs.asm |
| 1483 pressure_update_lag_counter res 1 ; lag time counter for fast surface pressure display updating | |
| 650 | 1484 gp_debug res 2 ; General Purpose debug registers |
| 634 | 1485 |
| 656 | 1486 gauge_status_byte res 1 ; gauge IC status byte |
| 1487 | |
| 1488 ; 208 byte used, 1 byte free (208 byte total) | |
| 582 | 1489 |
| 1490 | |
| 634 | 1491 ;----------------------------------------------------------------------------- |
| 1492 ; LOCAL DATA | |
| 1493 ;----------------------------------------------------------------------------- | |
| 1494 | |
| 582 | 1495 ; Space for various overlayed local data from top-level applications, |
| 1496 ; i.e. applications that never run in parallel to each other | |
| 634 | 1497 |
| 582 | 1498 ; --------------------- local Data Users -------------------------------------- |
| 623 | 1499 ; |
| 1500 ; -------------- Applications using ---------------------- | |
| 582 | 1501 ; Mode local1 local2 local3 |
| 634 | 1502 ; -------------------------------------------------------------------------- |
| 582 | 1503 ; sleepmode sleepmode.asm (unused) (unused) |
| 1504 ; surfmode surfmode.asm* (unused) (unused) | |
| 628 | 1505 ; simulator divemode.asm divemode.asm simulator.asm |
| 604 | 1506 ; divemode divemode.asm divemode.asm ghostwriter.asm |
| 623 | 1507 ; logbook logbook.asm logbook.asm logbook.asm |
| 582 | 1508 ; |
| 1509 ; * assigned to this slot, but currently no local memory used | |
| 1510 | |
| 1511 local1 equ 0x1D0 ; Alias for CBLOCK directive | |
| 1512 local1 udata_ovr 0x1D0 ; Bank1 shared local space | |
| 1513 res 0x10 ; 16 Byte (0x1D0 ... 0x1DF) | |
| 1514 | |
| 1515 local2 equ 0x1E0 ; Alias for CBLOCK directive | |
| 1516 local2 udata_ovr 0x1E0 ; Bank1 shared local space | |
| 1517 res 0x10 ; 16 Byte (0x1E0 ... 0x1EF) | |
| 1518 | |
| 1519 local3 equ 0x1F0 ; Alias for CBLOCK directive | |
| 1520 local3 udata_ovr 0x1F0 ; Bank1 shared local space | |
| 1521 res 0x10 ; 16 Byte (0x1F0 ... 0x1FF) | |
| 1522 | |
| 1523 | |
| 634 | 1524 ;----------------------------------------------------------------------------- |
| 1525 ; Common2 DATA | |
| 1526 ;----------------------------------------------------------------------------- | |
| 1527 | |
| 623 | 1528 common2 equ 0xA00 ; Alias for "banksel common2" |
| 1529 common2 udata_ovr common2 ; Bank 10 general variables | |
| 582 | 1530 |
| 623 | 1531 ;---- Data for Logging (6 byte), sampled in divemode.asm and used in ghostwriter.asm |
| 1532 start_year res 1 ; year | ATTENTION: | |
| 1533 start_month res 1 ; month | do not change the | |
| 1534 start_day res 1 ; day | position of these | |
| 1535 start_hour res 1 ; hour | variables relative | |
| 1536 start_mins res 1 ; minute | to each other! | |
| 1537 start_secs res 1 ; second, not used, for code commonality | | |
| 582 | 1538 |
| 623 | 1539 supersat_start res 1 ; leading tissue supersaturation at beginning of the dive |
| 1540 | |
| 1541 ;---- O2 Sensors (9 byte, updated by ISR when sensors are connected via datalink) | |
| 656 | 1542 IFDEF _external_sensor_eccr |
| 623 | 1543 sensor1_mv res 2 ; sensor 1 voltage in 0.1 mV steps |
| 1544 sensor2_mv res 2 ; sensor 2 voltage in 0.1 mV steps | |
| 1545 sensor3_mv res 2 ; sensor 3 voltage in 0.1 mV steps | |
| 1546 sensor1_ppO2 res 1 ; sensor 1 ppO2 in 0.01 bar steps | |
| 1547 sensor2_ppO2 res 1 ; sensor 2 ppO2 in 0.01 bar steps | |
| 1548 sensor3_ppO2 res 1 ; sensor 3 ppO2 in 0.01 bar steps | |
| 1549 ENDIF | |
| 582 | 1550 |
| 623 | 1551 ;---- last Dive Statistics (7 byte) |
| 1552 lastdive_duration res 3 ; byte 0= minutes, low byte, 1= minutes, high byte, 2= seconds | |
| 1553 lastdive_maxdepth res 2 ; in mbar | |
| 1554 lastdive_avgdepth res 2 ; in mbar | |
| 582 | 1555 |
| 623 | 1556 ;---- Backup of last shown Custom View (2 byte) |
| 582 | 1557 customview_surfmode res 1 ; storage to remember last selected custom view in surface mode |
| 1558 customview_divemode res 1 ; storage to remember last selected custom view in dive mode | |
| 1559 | |
| 623 | 1560 ;---- Miscellaneous (0 byte) |
| 1561 ;old_velocity res 4 ; stores the last 4 speeds (8 seconds) in m/min | |
| 1562 | |
| 1563 ;---- Menu Processor (8 byte) | |
| 1564 menustack res 8 ; menu stack | |
| 582 | 1565 |
| 628 | 1566 ;---- Graphical Compass (15 byte) |
| 623 | 1567 xRD res 2 ; virtual compass ruler offset |
| 1568 xRDr res 2 ; virtual compass ruler offset - right end | |
| 1569 xRD180 res 2 ; virtual compass ruler offset for the -180 marker | |
| 1570 xLO res 1 ; lo backup to prevent trashing | |
| 1571 xHI res 1 ; hi backup to prevent trashing | |
| 1572 xCM res 1 ; compass bearing relative position | |
| 1573 compass_heading_new res 2 ; corrected heading (in 1°) : -180 .. 180 | |
| 1574 compass_heading_shown res 2 ; displayed heading | |
| 1575 compass_bearing res 2 ; displayed bearing | |
| 582 | 1576 |
| 623 | 1577 ;---- Compass Arithmetics (30 byte) |
| 1578 compass_DX res 2 ; raw data | |
| 1579 compass_DY res 2 ; raw data | |
| 1580 compass_DZ res 2 ; raw data | |
| 1581 accel_DX res 2 ; raw data | |
| 1582 accel_DY res 2 ; raw data | |
| 1583 accel_DZ res 2 ; raw data | |
| 1584 compass_DX_f res 2 ; filtered Data | |
| 1585 compass_DY_f res 2 ; filtered Data | |
| 1586 compass_DZ_f res 2 ; filtered Data | |
| 1587 accel_DX_f res 2 ; filtered Data | |
| 1588 accel_DY_f res 2 ; filtered Data | |
| 1589 accel_DZ_f res 2 ; filtered Data | |
| 631 | 1590 compass_CX_f res 2 ; calibration data (stored via options system) |
| 1591 compass_CY_f res 2 ; calibration data (stored via options system) | |
| 1592 compass_CZ_f res 2 ; calibration data (stored via options system) | |
| 582 | 1593 |
| 623 | 1594 ;---- temporary Data for Q15 Arithmetics (7 byte, compass_ops.asm, called from C) |
| 1595 compass_a res 2 ; | |
| 1596 compass_b res 2 ; | |
| 1597 compass_r res 3 ; | |
| 1598 | |
| 1599 ;---- Data Exchange with TR Co-Processor (50 byte) | |
| 604 | 1600 IFDEF _rx_functions |
| 1601 rx_buffer res .48 ; Buffer for RX data (slots 0-7) | |
| 623 | 1602 rx_firmware_cur_major res 1 ; TR module current firmware, major |
| 1603 rx_firmware_cur_minor res 1 ; TR module current firmware, minor | |
| 1604 ENDIF | |
| 604 | 1605 |
| 628 | 1606 ;---- SAC Calculation on Pressure Readings 1 & 2 (22 byte) |
| 623 | 1607 IFDEF _rx_functions |
| 604 | 1608 pres_accu_1st res 4 ; accumulator for pressure drop in 1/160 bar | ATTENTION: do not |
| 1609 pres_accu_2nd res 4 ; accumulator for pressure drop in 1/160 bar | change the | |
| 628 | 1610 time_accu_1st res 2 ; accumulator for reading ages in seconds | position |
| 604 | 1611 gas__last_1st res 1 ; last gas assignment | of these |
| 628 | 1612 time_accu_2nd res 2 ; accumulator for reading ages in seconds | variables |
| 604 | 1613 gas__last_2nd res 1 ; last gas assignment | relative |
| 1614 pres_last_1st res 2 ; last pressure reading pressure in 1/160 bar | to each | |
| 1615 pres_last_2nd res 2 ; last pressure reading pressure in 1/160 bar | other! | |
| 1616 time_last_1st res 2 ; last pressure reading time in seconds | | |
| 1617 time_last_2nd res 2 ; last pressure reading time in seconds | | |
| 1618 ENDIF | |
| 1619 | |
| 656 | 1620 i2c_error_vault res 3 ; Store last used device ID, data byte and copy of SSP1CON2 |
| 643 | 1621 D1_buffer res 3 ; Buffer of D1 (Sensor raw data) |
| 1622 D2_buffer res 3 ; Buffer of D2 (Sensor raw data) | |
| 656 | 1623 i2c_error_counter res 2 ; counts I2C errors |
| 1624 | |
| 645 | 1625 brightness res 1 ; =0: Eco, =1:Medium, =2:Full |
| 654 | 1626 charge_cycles res 2 ; 16bit charge cycles counter |
| 656 | 1627 |
| 1628 ;---- IR/S8-Link | |
| 1629 ir_s8_buffer res .64 ; buffer for data received on IR/S8 interface, | |
| 1630 | |
| 657 | 1631 ; 226 byte used, 23 byte free |
| 631 | 1632 |
| 1633 | |
| 634 | 1634 ;----------------------------------------------------------------------------- |
| 1635 ; Bank 2 General Purpose Buffer 1 | |
| 1636 ;----------------------------------------------------------------------------- | |
| 1637 | |
| 631 | 1638 ; NOTE: needs to be aligned with a bank (low(buffer)=0) |
| 1639 | |
| 1640 buffer udata_ovr 0x200 | |
| 1641 buffer res .256 ; buffer 1 - string buffer, etc. | |
| 582 | 1642 |
| 1643 | |
| 634 | 1644 ;----------------------------------------------------------------------------- |
| 1645 ; Bank 11 General Purpose Buffer 2 | |
| 1646 ;----------------------------------------------------------------------------- | |
| 1647 | |
| 1648 ; NOTE: needs to be aligned with a bank (low(buffer)=0) | |
| 631 | 1649 ; |
| 1650 ; Remark: this memory block is already allocated in shared_definitions.h for | |
| 1651 ; use while in dive mode, so we need to make a hard reference here | |
| 634 | 1652 |
| 631 | 1653 ;buffer2 udata_ovr 0xB00 |
| 1654 ;buffer2 res .256 ; buffer 2 - backtracking, flash mirror, etc. | |
| 582 | 1655 |
| 631 | 1656 #DEFINE buffer2 0xB00 |
| 582 | 1657 |
| 1658 | |
| 634 | 1659 ;----------------------------------------------------------------------------- |
| 1660 ; Bank 14 Options Table | |
| 1661 ;----------------------------------------------------------------------------- | |
| 1662 | |
| 623 | 1663 opt_table equ 0xE00 ; Alias for "banksel opt_table" |
| 1664 opt_table udata_ovr opt_table ; Bank 14 options table | |
| 582 | 1665 |
| 623 | 1666 ;---- Gas and Diluent Settings |
| 604 | 1667 opt_gas_O2_ratio res 5 ; O2 ratios of OC/bailout gases | ATTENTION: |
| 1668 opt_dil_O2_ratio res 5 ; O2 ratios of diluents | keep relative | |
| 1669 opt_gas_He_ratio res 5 ; He ratios of OC/bailout gases | positioning of | |
| 1670 opt_dil_He_ratio res 5 ; He ratios of diluents | all arrays in | |
| 1671 opt_gas_type res 5 ; OC/bailout gas type: O=Disabled, 1=First, 2=Travel, 3=Deco | this block! | |
| 1672 opt_dil_type res 5 ; dil type: 0=Disabled, 1=First, 2=Normal | | |
| 1673 opt_gas_change res 5 ; change depths for OC/Bailout gases | | |
| 1674 opt_dil_change res 5 ; change depths for diluents | | |
| 1675 | |
| 634 | 1676 ;---- Gas 6 Settings |
| 1677 opt_gas6_O2_ratio res 1 ; gas 6 O2 ratio | ATTENTION: keep relative positioning | |
| 1678 opt_gas6_He_ratio res 1 ; gas 6 He ratio | of these two variables! | |
| 1679 | |
| 1680 ;---- Setpoints Settings | |
| 623 | 1681 opt_setpoint_cbar res 5 ; setpoints in cbar | ATTENTION: keep relative positioning |
| 1682 opt_setpoint_change res 5 ; change depth for the setpoints in meter | of these two arrays! | |
| 582 | 1683 |
| 623 | 1684 ;---- Dive Mode Settings |
| 1685 opt_dive_mode res 1 ; main dive/deco mode: =0: OC, =1: CC, =2: Gauge, =3: Apnea, =4: pSCR | |
| 1686 opt_ccr_mode res 1 ; CCR/pSCR sub mode: =0: fixed/calculated SP, =1: Sensor, =2: Auto SP | |
| 1687 | |
| 1688 ;---- custom Text | |
| 1689 #DEFINE opt_name_length .60 ; custom text string 5 rows with 12 chars | |
| 1690 opt_name res opt_name_length | |
| 1691 | |
| 1692 ;---- various other Settings | |
| 631 | 1693 opt_fw_version_major res 1 ; firmware version, major | use read-only! |
| 1694 opt_fw_version_minor res 1 ; firmware version, minor | | |
| 1695 opt_fw_version_beta res 1 ; firmware version, beta | | |
| 623 | 1696 opt_surface_interval res 1 ; surface interval, used by deco calculator |
| 645 | 1697 opt_brightness_divemode res 1 ; =0: Eco, =1:Medium, =2:Full |
| 1698 opt_brightness_surface res 1 ; =0: Eco, =1:Medium, =2:Full | |
| 650 | 1699 opt_use_AmbientSensor res 1 ; =1: Use the ambient sensor |
| 582 | 1700 opt_salinity res 1 ; 0-5% |
| 604 | 1701 opt_language res 1 ; current language: 0=EN, 1=DE, 2=FR, 3=SP |
| 582 | 1702 opt_units res 1 ; 0:m/°C, 1:ft/°F |
| 1703 opt_dateformat res 1 ; =0:MMDDYY, =1:DDMMYY, =2:YYMMDD | |
| 634 | 1704 opt_dive_color_scheme res 1 ; dive mode color scheme selection |
| 582 | 1705 opt_last_stop res 1 ; =3:3m, =4:4m, =5:5m, =6:6m |
| 604 | 1706 opt_aGF_high res 1 ; alternative GF HIGH |
| 1707 opt_aGF_low res 1 ; alternative GF LOW | |
| 582 | 1708 opt_GF_high res 1 ; GF HIGH |
| 1709 opt_GF_low res 1 ; GF LOW | |
| 1710 opt_enable_aGF res 1 ; =1: aGF can be selected underwater | |
| 1711 opt_compass_gain res 1 ; 0-7 (230LSB/Gauss to 1370LSB/Gaus) | |
| 1712 opt_sampling_rate res 1 ; =1: 10s, =0: 2s | |
| 1713 opt_pressure_adjust res 1 ; SIGNED char (two's complement), -20/+20mbar max. | |
| 631 | 1714 opt_safetystop res 1 ; =1: a safety stop is shown |
| 582 | 1715 opt_calibration_O2_ratio res 1 ; %O2 of calibration gas |
| 634 | 1716 opt_x_s1 res 2 ; calibration factor (not stored in EEPROM) | keep relative |
| 1717 opt_x_s2 res 2 ; calibration factor (not stored in EEPROM) | position! | |
| 1718 opt_x_s3 res 2 ; calibration factor (not stored in EEPROM) | | |
| 582 | 1719 opt_sensor_fallback res 1 ; NOT USED ANY MORE, KEPT FOR COMPATIBILITY WITH EEPROM IMAGE |
| 604 | 1720 opt_flip_screen res 1 ; =1: flip the screen |
| 623 | 1721 opt_cR_button_left res 1 ; left button sensitivity (cR hardware) |
| 604 | 1722 opt_cR_button_right res 1 ; right button sensitivity (cR hardware) |
| 631 | 1723 opt_depth_warn res 1 ; =1:do a red blinking warning, =0:default behavior |
| 1724 opt_vsitext res 1 ; =1:use the depth dependent ascend rate limits | |
| 582 | 1725 opt_vsigraph res 1 ; =1:draw the graphical VSI bar |
| 1726 opt_showppo2 res 1 ; =1:always show the ppO2 value in the warning position | |
| 1727 opt_temperature_adjust res 1 ; SIGNED char (two's complement), -2.0/+2.0 °C max. | |
| 1728 opt_safety_stop_length res 1 ; [s] | |
| 1729 opt_safety_stop_start res 1 ; [cbar] | |
| 1730 opt_safety_stop_end res 1 ; [cbar] | |
| 1731 opt_safety_stop_reset res 1 ; [cbar] | |
| 604 | 1732 opt_diveTimeout res 1 ; timeout for dive mode [min] |
| 582 | 1733 opt_sim_setpoint_number res 1 ; setpoint to use for deco calculation |
| 631 | 1734 opt_calc_gasvolume res 1 ; calculate OC gas volume needs for ascent |
| 582 | 1735 opt_sim_use_aGF res 1 ; =0: use GF, =1: use aGF for deco calculation |
| 1736 opt_enable_IBCD res 1 ; enable IBCD warning | |
| 1737 opt_sat_multiplier_gf res 1 ; Buhlmann safety factor for GF deco | |
| 1738 opt_desat_multiplier_gf res 1 ; Buhlmann safety factor for GF deco | |
| 1739 opt_sat_multiplier_non_gf res 1 ; Buhlmann safety factor for NON-GF deco | |
| 1740 opt_desat_multiplier_non_gf res 1 ; Buhlmann safety factor for NON-GF deco | |
| 604 | 1741 opt_2ndDepthDisp res 1 ; =1: show average depth instead of max depth |
| 623 | 1742 opt_max_depth res 1 ; depth at which a warning will be given |
| 631 | 1743 opt_store_apnoe res 1 ; =1: store dives in apnoe mode into logbook |
| 623 | 1744 opt_tissue_graphics res 1 ; =0: show N2 and He pressures, =1: show pressures and saturations |
| 1745 opt_logoffset_step res 1 ; step size when adjusting log offset | |
| 1746 opt_layout res 1 ; initial layout of dive mode screen | |
| 631 | 1747 opt_ext_stops res 1 ; =1: place gas switches also below 1st stop depth |
| 1748 opt_s8_mode res 1 ; S8 mode - analog / digital | |
| 1749 opt_gas_contingency_sim res 1 ; =1: deco calculator: switch to alternative gas if best gas is used up | |
| 1750 opt_gas_contingency_dive res 1 ; =1: real dive mode: switch to alternative gas if best gas is used up | |
| 1751 opt_cave_mode res 1 ; =1: cave mode switched on | |
| 634 | 1752 opt_gas_density_check res 1 ; =1: gas density is checked (effective in CCR / pSCR modes only) |
| 1753 opt_comm_timeout res 1 ; comm RX timeout in multiples of 10 ms | |
| 1754 opt_fallback res 1 ; unused dummy option for compatibility with 3rd party tools | |
| 1755 opt_conservatism res 1 ; unused dummy option for compatibility with 3rd party tools | |
| 650 | 1756 opt_warning_level_divemode res 1 ; warning verbose level (divemode) =0: Less, =1: All |
| 654 | 1757 opt_timeformat res 1 ; =0:24h, =1:12h |
| 656 | 1758 opt_BLE_compatibility res 1 ; =1: configure BLE name to hwOS style for dn hardware |
| 654 | 1759 |
| 623 | 1760 ;---- RX Function Settings |
| 604 | 1761 opt_transmitter_id_1 res 2 ; 16 bit transmitter ID for Gas 1 |
| 1762 opt_transmitter_id_2 res 2 ; 16 bit transmitter ID for Gas 2 | |
| 1763 opt_transmitter_id_3 res 2 ; 16 bit transmitter ID for Gas 3 | |
| 1764 opt_transmitter_id_4 res 2 ; 16 bit transmitter ID for Gas 4 | |
| 1765 opt_transmitter_id_5 res 2 ; 16 bit transmitter ID for Gas 5 | |
| 1766 opt_transmitter_id_6 res 2 ; 16 bit transmitter ID for Dil 1 | |
| 1767 opt_transmitter_id_7 res 2 ; 16 bit transmitter ID for Dil 2 | |
| 1768 opt_transmitter_id_8 res 2 ; 16 bit transmitter ID for Dil 3 | |
| 1769 opt_transmitter_id_9 res 2 ; 16 bit transmitter ID for Dil 4 | |
| 1770 opt_transmitter_id_10 res 2 ; 16 bit transmitter ID for Dil 5 | |
| 1771 opt_TR_mode res 1 ; TR functions - mode | |
| 1772 opt_TR_1st_pres res 1 ; TR functions - 1st pressure assignment | |
| 1773 opt_TR_2nd_pres res 1 ; TR functions - 2nd pressure assignment | |
| 1774 opt_TR_Bail_pres res 1 ; TR functions - bailout pressure assignment | |
| 1775 | |
| 657 | 1776 ;---- Scrubber timer |
| 1777 opt_ScrubberTime res 1 ; Scrubber timer time in 10min | |
| 1778 opt_ScrubTmrEnable res 1 ; =1: Use the Scrubber Timer, =0: Ignore the Scrubber Timer | |
| 1779 opt_scrubber_timer_mins res 2 ; The Scrubber timer in mins | |
| 1780 opt_scrubber_timer_day res 1 ; Date when then Scrubber was restarted | |
| 1781 opt_scrubber_timer_month res 1 ; Date when then Scrubber was restarted | |
| 1782 opt_scrubber_timer_year res 1 ; Date when then Scrubber was restarted | |
| 1783 ; ==> 201 bytes used - 43 bytes free (244 usable bytes only in bank 14 as the upper 12 | |
| 631 | 1784 ; bytes are reserved for special function registers) |
| 582 | 1785 |
| 1786 ;----------------------------------------------------------------------------- |