Mercurial > public > ostc4

log

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
less more | rev 730: (0) -240 +240 tip
age author description
2023-01-14 Ideenmodellierer Update sensor menu support for automatic sensor detection:
2023-01-14 Ideenmodellierer Added auto detection functionality for sensors connected to the external interface:
2023-01-14 Ideenmodellierer Added sensor map to Firmware <=> RTE inferface:
2023-01-14 Ideenmodellierer Enabled CO2 support for beta test phase:
2023-01-14 Ideenmodellierer Bugfix data synchronization after RTE start:
2023-01-07 Ideenmodellierer Update CO2 sensor implementation:
2023-01-05 Ideenmodellierer Development feature: external pressure sensor
2023-01-05 Ideenmodellierer DigO2 added raw data request:
2023-01-05 Ideenmodellierer Show saturation in large font (T3) view:
2023-01-05 Ideenmodellierer DigO2 added raw data request:
2023-01-03 Ideenmodellierer Bugfix set date (year):
2022-11-27 heinrichsweikamp Add build for 1.6.1 beta / RTE 2.9 (Support for DiveO2 solid state oxygen sensors)
2022-11-20 Ideenmodellierer Updated menu structure to support new sensor information page:
2022-11-20 Ideenmodellierer Added new info page for extended sensor data:
2022-11-20 Ideenmodellierer Added customizable data area for specific sensor data:
2022-11-20 Ideenmodellierer Increased version number and set beta label
2022-11-20 Ideenmodellierer Added customizable data area for specific sensor data:
2022-11-20 Ideenmodellierer Increased version number and set beta label
2022-11-20 Ideenmodellierer Bugfix PSCR menu button label:
2022-11-08 Ideenmodellierer Development bugfix number of spare bytes in setting structure
2022-11-08 Ideenmodellierer Extension scrubber time:
2022-11-08 Ideenmodellierer Bugfix compass bearing:
2022-11-03 Ideenmodellierer Menu cleanup rebreather specific settings:
2022-11-03 Ideenmodellierer Menu cleanup rebreather specific settings:
2022-11-03 Ideenmodellierer Bugfix: only reset menu if a new sub menu is created:
2022-11-01 Ideenmodellierer Bugfix release frame:
2022-10-28 Ideenmodellierer Added protocol functions for UART DiveO2 sensor:
2022-10-28 Ideenmodellierer Added selection of digital o2 sensor source to HW menu:
2022-10-28 Ideenmodellierer Added digital o2 sensor to settings and data exchange:
2022-10-28 Ideenmodellierer Bugfix display of deactivated sensors:
2022-10-18 Ideenmodellierer Bugfix motioncontrol frame deactivation:
2022-10-18 Ideenmodellierer Cleanup warnings:
2022-09-25 Ideenmodellierer Bugfix Empty menu:
2022-09-25 Ideenmodellierer Improvment key event detection:
2022-08-19 heinrichsweikamp Merge
2022-08-19 heinrichsweikamp 1.6.0 release Betatest
2022-08-06 heinrichsweikamp Update current build for testing Betatest
2022-08-05 Ideenmodellierer Improvment charge percent visualization: Betatest
2022-08-05 Ideenmodellierer Added compile switch for Sentinel rebreather option Betatest
2022-08-05 Ideenmodellierer Improvment external interface usage: Betatest
2022-08-05 Ideenmodellierer Added Sentinel protocoll support: Betatest
2022-08-05 Ideenmodellierer Added Sentinel as O2 sensor source: Betatest
2022-08-05 Ideenmodellierer Added sanity check for temperature and pressure values: Betatest
2022-08-05 Ideenmodellierer Increased version numbers: Betatest
2022-08-05 Ideenmodellierer Bugfix Battery charge complete event: Betatest
2022-08-03 Ideenmodellierer Bugfix automatic switch to o2 sensor custom view: Betatest
2022-06-02 Ideenmodellierer Ignore automatic setpoint changes during ascend: Betatest
2022-05-16 Ideenmodellierer Bugfix: Set actual gas after basic dive settings were created: Betatest
2022-04-25 Ideenmodellierer Bugfix low ppO2 warning in bailout mode: Betatest
2022-04-25 Ideenmodellierer Bugfix screen clipping (Flipdisplay mode): Betatest
2022-04-25 Ideenmodellierer Bugfix visualization better setpoint: Betatest
2022-04-22 Jan Mulder cleanup: Use correct "per" symbol Betatest
2022-04-21 Jan Mulder Bugfix: deco planner did not initialize properly Betatest
2022-04-20 Jan Mulder Move include file to common to ... Betatest
2021-11-22 Jan Mulder Allow longer scrubber time Betatest
2022-03-30 Ideenmodellierer Bugfix: Missing flip screen support for charge view Betatest
2022-03-30 heinrichsweikamp Zusammenf?hren Betatest
2022-03-30 heinrichsweikamp Show 98% in case of Oxygen as the calibrating gas Betatest
2022-03-12 Ideenmodellierer Added Charging view: Betatest
2022-03-12 Ideenmodellierer Support of unknown charging counter values: Betatest
2022-03-12 Ideenmodellierer Reduce display brightness in case the charger is connected: Betatest
2022-03-12 Ideenmodellierer Rework charge cycle: Betatest
2022-03-12 Ideenmodellierer Rework charge cycle: Betatest
2022-03-12 Ideenmodellierer Increased version number Betatest
2022-03-12 heinrichsweikamp increase version numbers for upcomming release Betatest
2021-12-24 heinrichsweikamp update test build Betatest
2021-12-21 Ideenmodellierer Stability improvment bluetooth startup: Betatest
2021-12-21 Ideenmodellierer Revert Setbluetooh name changes Betatest
2021-12-14 heinrichs weikamp PSCR Mode Betatest
2021-11-01 heinrichs weikamp Undo Rev. 660
2021-08-08 heinrichsweikamp Add option to reset bluetooth name
2021-04-28 heinrichs weikamp Update build file for testing
2021-04-27 Ideenmodellierer Bugfix handling of new menu tab in flipped mode:
2021-04-26 heinrichs weikamp Update release date
2021-04-25 Ideenmodellierer Added visualization of scrubber time:
2021-04-25 Ideenmodellierer Added count down timer for scrubber time:
2021-04-25 Ideenmodellierer Introduced new menu tab for addition CCR options:
2021-04-25 Ideenmodellierer Bugfix temperature display Logpage2:
2021-04-19 Ideenmodellierer Allow setpoint starting at 0.4 ppO2:
2021-04-19 Ideenmodellierer Automatik setpoint change:
2021-04-19 Ideenmodellierer Automatik setpoint change:
2021-04-19 Ideenmodellierer Bugfix consider checkbox in calculation of right aligned and centered position:
2021-04-19 Ideenmodellierer Motion detection: Enable focus after focus calibration:
2021-04-13 Ideenmodellierer Integrated selection of bailout in the diluent selection page:
2021-04-13 Ideenmodellierer Remove battery charge counter from information menu:
2021-04-13 Ideenmodellierer Small changes in charger state handling:
2021-03-30 heinrichs weikamp Compile with ENABLE_CHARGER_STATUS_V2
2021-03-24 Ideenmodellierer Reimplemented charger status generation (deactivated):
2021-03-24 Ideenmodellierer Do not show focus indicator in case motion detection is suspended:
2021-03-11 Ideenmodellierer Development Bugfix Deco bars not shown after last deco stop passed:
2021-03-11 Ideenmodellierer Development bugfix Viewport settings:
2021-02-25 heinrichsweikamp add build for testing, advance to FW1.5.7, RTE is unchanged since 1.5.6
2021-02-24 Ideenmodellierer Added last measured PPO2 value to sensor selection dialog:
2021-02-24 Ideenmodellierer Debounce fallback warning:
2021-02-24 Ideenmodellierer Debounce fallback warning:
2021-02-24 Ideenmodellierer Debounce fallback warning:
2021-02-24 Ideenmodellierer Enable sensor check for Analog PPO2 mode:
2021-02-23 Ideenmodellierer Added menu structure to allow ppo2 modification in simulator mode:
2021-02-23 Ideenmodellierer Warnings:
2021-02-23 Ideenmodellierer Warnings:
2021-02-23 Ideenmodellierer Warnings:
2021-02-23 Ideenmodellierer Added functionality to add ppo2 mV offset:
2021-02-12 Ideenmodellierer Added compile switch for T3_PROFILE menu operation option
2021-02-12 Ideenmodellierer Improve in / out of focus transitions:
2021-02-12 Ideenmodellierer Added option to select sensitivity of focus detection:
2021-02-08 Ideenmodellierer Switch Sector / Scroll detection to vector implementation:
2021-02-07 Ideenmodellierer Development bugfix: Marker in standard t3 view drawn in wrong direction
2021-02-07 Ideenmodellierer Improvment frame Handling:
2021-02-03 Ideenmodellierer Adjustments for flipped display view:
2021-02-03 Ideenmodellierer Use roll and pitch agles in 0-360 format:
2021-01-27 Ideenmodellierer Added minilog functions to allow marker synchronisation:
2021-01-27 Ideenmodellierer Added t3 quick menu for marker synchronisation:
2021-01-27 Ideenmodellierer Development bugfix: focus state not remembered:
2021-01-27 Ideenmodellierer Development bugfix: Low battery warning was interpretated as marker:
2021-01-27 Ideenmodellierer Development bugfix: show replay symbol only for the selected dive:
2021-01-27 Ideenmodellierer Moved non critical functions from timer interrupt to main loop:
2021-01-20 Ideenmodellierer Added "Set Marker" to T3 quick menu:
2021-01-15 Ideenmodellierer Added "Set Marker" to T3 quick menu:
2021-01-15 Ideenmodellierer Bugfix inverted whitspace:
2021-01-14 Ideenmodellierer Suspend MotionDetection events while diver is operationg the OSTC:
2021-01-14 Ideenmodellierer Added access to logbook marker data:
2021-01-14 Ideenmodellierer Bugfix: CalibViewport were shown even in case the compile switch had not been set:
2021-02-05 heinrichsweikamp Update RTE required value for release
2021-02-05 heinrichsweikamp Added tag v1.5.6 release for changeset 06ec1da5e105
2021-02-05 heinrichsweikamp 1.5.6 release v1.5.6 release
2021-01-07 heinrichsweikamp change O2_CALIB_FRACTION_O2 to 0.98
2021-01-06 Ideenmodellierer Merged menu items of viewport and motion control:
2021-01-06 Ideenmodellierer T3 profile view: Added visualization of deco data
2021-01-05 Ideenmodellierer Added replay data scaling in case life data is longer than replay block
2021-01-04 Ideenmodellierer Bugfix T3 skip deactivated views:
2021-01-04 Ideenmodellierer Added compile switch for new T3 View Profile
2021-01-04 Ideenmodellierer Bugfix T3 skip deactivated views:
2021-01-04 Ideenmodellierer New replay block for T3 profile:
2021-01-04 Ideenmodellierer MotionControl-Sector: Map sectors during switch T7 <=> T3:
2021-01-04 Ideenmodellierer Added functionality to select a dive to be shown in the T3 profile view:
2021-01-04 Ideenmodellierer Bugfix Selection of primary view:
2021-01-04 Ideenmodellierer Added compile switch for new T3 View Profile
2021-01-04 Ideenmodellierer Added PrintGraph option to skip invalid data entries:
2021-01-03 Ideenmodellierer MotionCtrl - Sectorview Map sectors directly to custom views:
2021-01-06 heinrichsweikamp Minor: Comment translation into English
2020-12-22 Ideenmodellierer Align VPM tag in log list to be at same position as GF tag:
2020-12-17 heinrichsweikamp Minor: Update the documentation for building the code
2020-12-17 heinrichsweikamp Update current build, "RTErequired" value and release date
2020-12-16 heinrichsweikamp update ostc4pack sample files
2020-12-13 Ideenmodellierer Motion control: Jump back to primary view if focus is lost:
2020-12-13 Ideenmodellierer Reduced view angle and number of vusiualized custom views in setor mode:
2020-12-12 Ideenmodellierer Added option for 100% o2 calibration:
2020-12-12 Ideenmodellierer Solved minor warnings
2020-12-12 Ideenmodellierer Show Fallback if no valid sensor value is available:
2020-12-12 Ideenmodellierer Added ex Interface measurement restart in case of i2c disturbance:
2020-12-12 Ideenmodellierer Bugfix bad resolution of compass LSM303AGR:
2020-12-03 heinrichsweikamp Minor: Functional inert cleanup of some unused variables
2020-11-29 Ideenmodellierer Rework pitch detection:
2020-11-29 Ideenmodellierer Handle o2 voltage values < 0.5mV as invalid:
2020-11-29 Ideenmodellierer Return to o2 values:
2020-11-29 Ideenmodellierer Change style of viewport calibration menu:
2020-11-25 Ideenmodellierer Improved focus detection:
2020-11-25 Ideenmodellierer Update String "Blickwinkel":
2020-11-25 Ideenmodellierer Added debug view to viewport calibration:
2020-11-25 Ideenmodellierer Reactivate compass parameter stored in NVM:
2020-11-30 Ideenmodellierer Try to reduce legth of log entry string:
2020-11-30 Ideenmodellierer Added new section "lower.font":
2020-11-29 heinrichsweikamp Minor: Update the documentation for building the code
2020-11-24 izzni -Add 12HR Time Support
2020-11-21 heinrichsweikamp add current build
2020-11-15 Ideenmodellierer Bugfix center / right alignment if dualfont is used:
2020-11-15 Ideenmodellierer Bugfix One or more deactivated sensors hide sensor display:
2020-11-15 Ideenmodellierer Refine o2 sensor diagnostic functions:
2020-11-15 Ideenmodellierer Added ADC sensor interface to O2 sensore menu structure:
2020-11-15 Ideenmodellierer Solved minor warnings
2020-11-15 Ideenmodellierer Added O2 sensor source and calibration parameters to setting structure
2020-11-15 Ideenmodellierer Check if HW evaluation was performed:
2020-11-12 Ideenmodellierer Changed operation mode of RecoverSampleIndex:
2020-11-12 Ideenmodellierer Stabilityfix: Do not trust lastDiveLogID == 0 at startup:
2020-11-12 Ideenmodellierer Switch source of o2 sensor data depending on availability of external ADC:
2020-11-12 Ideenmodellierer Added HW_Info to Discovery <=> RTE data exchange:
2020-11-12 Ideenmodellierer Added external ADC interface functionality (MCP3424):
2020-11-08 Ideenmodellierer Added color indicator for focus state:
2020-11-08 Ideenmodellierer Added menu structure to acces viewport calibration:
2020-11-08 Ideenmodellierer Added viewport functionality:
2020-11-08 Ideenmodellierer Make sure motion detection settings are set to default values:
2020-11-08 Ideenmodellierer Only execute motion detection functions if features is enabled:
2020-11-08 Ideenmodellierer Update roll and pitch value in simulation mode:
2020-11-02 Ideenmodellierer Added viewport calibration to dive menu:
2020-11-02 Ideenmodellierer Added new settings for Viewport:
2020-11-03 heinrichsweikamp Add I2C address for external bulkhead ADC (Hardware gen 3 only) to i2c.h
2020-11-02 heinrichsweikamp add current build
2020-10-11 Ideenmodellierer Shortend t3 view names:
2020-10-10 Ideenmodellierer Added new t3 view showing first deco stop and tts in parallel:
2020-10-10 Ideenmodellierer Added default view selection and auto return to view to t3 visualization:
2020-10-10 Ideenmodellierer Bugfix return from submenu in t3 view:
2020-10-10 Ideenmodellierer Added inertia simulation for compass heading:
2020-10-10 Ideenmodellierer BugFix firmware downgrade to version with less settings:
2020-10-07 Ideenmodellierer Added center / right alignment option to custom text display:
2020-10-07 Ideenmodellierer Changed visualization of Depth / temperatur / debugview entry
2020-10-07 Ideenmodellierer Increased max value for surface pressure:
2020-10-04 heinrichsweikamp Added tag 1.5.5 release for changeset 02e7e11fdbe8
2020-09-25 heinrichsweikamp increase version numbers, compile with TRUST_LOG_CONSISTENCY switch 1.5.5 release
2020-09-16 heinrichsweikamp add current build
2020-09-15 Ideenmodellierer Bugfix custom view selection dialog:
2020-09-15 Ideenmodellierer Bugfix: No need to consider surface custom view in count of enabled view:
2020-09-15 Ideenmodellierer Added skip condition in custom view selection:
2020-09-13 Ideenmodellierer Added new option to gas configuration: "Off":
2020-09-13 Ideenmodellierer Do not show gases in "Off" state in custom gas list:
2020-09-13 Ideenmodellierer Added new option to gas configuration: "Off":
2020-09-13 Ideenmodellierer Change color ID used in strings for light grey:
2020-09-13 Ideenmodellierer Minor: Removed duplicated definition of number of available gases
2020-09-10 Ideenmodellierer Changed string for data view selections:
2020-09-10 Ideenmodellierer Added compile switch for motion control:
2020-09-10 Ideenmodellierer Move Bigfont and motion Ctrl selection menu out of custom view submenu:
2020-09-08 Ideenmodellierer Moved custom view menu to new tab:
2020-09-06 Ideenmodellierer Reset Safety Stop display in case of a new descend:
2020-09-06 Ideenmodellierer Added T3_gaslist:
2020-09-06 Ideenmodellierer Added color coding for cv gas list:
2020-09-06 Ideenmodellierer Added quick menu function to big font view:
2020-09-06 Ideenmodellierer Added missing display of button labels in refresh function:
2020-09-16 heinrichsweikamp Properly send compass 3 into sleepmode (end-2019 hardware)
2020-08-31 heinrichsweikamp Merge
2020-08-30 Ideenmodellierer Added new strings for the selection of T3 custom views
2020-08-30 Ideenmodellierer Minor adaptions in page layout:
2020-08-30 Ideenmodellierer Display warning in t7 using centered strings
2020-08-30 Ideenmodellierer Show page number in small letters if more than 8 tabs are active
2020-08-30 Ideenmodellierer Reimplementation of tMenuEdit_select:
2020-08-30 Ideenmodellierer Added new menu tab into call structure
2020-08-30 Ideenmodellierer Added new top level menu for customization of views
2020-08-30 Ideenmodellierer Removed second big font profile
2020-08-24 Ideenmodellierer Added worst case plausibility check (disabled by compile switch)
2020-08-24 Ideenmodellierer Bugfix display of disabled screen.
2020-08-24 Ideenmodellierer Bugfix display of disabled screen.
2020-08-24 Ideenmodellierer Bugfix right alignment of dualfont strings
2020-08-24 Ideenmodellierer Added possibility to switch between "classic" bigfont views and a selection with a new information combination
2020-08-24 Ideenmodellierer Added compile switch to enable / disable new BigFont layout
2020-08-24 Ideenmodellierer Added dew parameter to enable selection of customer BigFont screens to be displayed
2020-08-24 Ideenmodellierer Added worst case plausibility check (disabled by compile switch)
2020-08-24 Ideenmodellierer Bugfix display of disabled screen.
2020-08-24 Ideenmodellierer Bugfix display of disabled screen.
2020-08-24 Ideenmodellierer Bugfix right alignment of dualfont strings
2020-08-24 Ideenmodellierer Added possibility to switch between "classic" bigfont views and a selection with a new information combination
2020-08-20 Ideenmodellierer Added compiler switch for existing debug view parameter
2020-08-10 heinrichsweikamp Added tag v1.5.4 release for changeset e9ca66ce36e5
less more | rev 730: (0) -240 +240 tip