ostc4: revision graph

graph

less more | rev 730: (0) -240 tip

Update sensor menu support for automatic sensor detection:
Sat, 14 Jan 2023 20:49:40 +0100, by Ideenmodellierer
Added auto detection functionality for sensors connected to the external interface:
Sat, 14 Jan 2023 20:46:17 +0100, by Ideenmodellierer
Added sensor map to Firmware <=> RTE inferface:
Sat, 14 Jan 2023 20:41:36 +0100, by Ideenmodellierer
Enabled CO2 support for beta test phase:
Sat, 14 Jan 2023 20:37:20 +0100, by Ideenmodellierer
Bugfix data synchronization after RTE start:
Sat, 14 Jan 2023 20:35:40 +0100, by Ideenmodellierer
Update CO2 sensor implementation:
Sat, 07 Jan 2023 18:11:52 +0100, by Ideenmodellierer
Development feature: external pressure sensor
Thu, 05 Jan 2023 18:30:06 +0100, by Ideenmodellierer
DigO2 added raw data request:
Thu, 05 Jan 2023 18:27:04 +0100, by Ideenmodellierer
Show saturation in large font (T3) view:
Thu, 05 Jan 2023 18:25:47 +0100, by Ideenmodellierer
DigO2 added raw data request:
Thu, 05 Jan 2023 18:22:21 +0100, by Ideenmodellierer
Bugfix set date (year):
Tue, 03 Jan 2023 19:47:12 +0100, by Ideenmodellierer
Add build for 1.6.1 beta / RTE 2.9 (Support for DiveO2 solid state oxygen sensors)
Sun, 27 Nov 2022 15:18:00 +0100, by heinrichsweikamp
Updated menu structure to support new sensor information page:
Sun, 20 Nov 2022 20:49:41 +0100, by Ideenmodellierer
Added new info page for extended sensor data:
Sun, 20 Nov 2022 20:46:10 +0100, by Ideenmodellierer
Added customizable data area for specific sensor data:
Sun, 20 Nov 2022 20:43:04 +0100, by Ideenmodellierer
Increased version number and set beta label
Sun, 20 Nov 2022 20:42:33 +0100, by Ideenmodellierer
Added customizable data area for specific sensor data:
Sun, 20 Nov 2022 20:42:08 +0100, by Ideenmodellierer
Increased version number and set beta label
Sun, 20 Nov 2022 20:37:44 +0100, by Ideenmodellierer
Bugfix PSCR menu button label:
Sun, 20 Nov 2022 20:36:34 +0100, by Ideenmodellierer
Development bugfix number of spare bytes in setting structure
Tue, 08 Nov 2022 22:16:56 +0100, by Ideenmodellierer
Extension scrubber time:
Tue, 08 Nov 2022 21:16:17 +0100, by Ideenmodellierer
Bugfix compass bearing:
Tue, 08 Nov 2022 21:13:14 +0100, by Ideenmodellierer
Menu cleanup rebreather specific settings:
Thu, 03 Nov 2022 20:44:51 +0100, by Ideenmodellierer
Menu cleanup rebreather specific settings:
Thu, 03 Nov 2022 20:44:21 +0100, by Ideenmodellierer
Bugfix: only reset menu if a new sub menu is created:
Thu, 03 Nov 2022 20:37:06 +0100, by Ideenmodellierer
Bugfix release frame:
Tue, 01 Nov 2022 09:55:45 +0100, by Ideenmodellierer
Added protocol functions for UART DiveO2 sensor:
Fri, 28 Oct 2022 20:49:21 +0200, by Ideenmodellierer
Added selection of digital o2 sensor source to HW menu:
Fri, 28 Oct 2022 20:32:24 +0200, by Ideenmodellierer
Added digital o2 sensor to settings and data exchange:
Fri, 28 Oct 2022 20:29:37 +0200, by Ideenmodellierer
Bugfix display of deactivated sensors:
Fri, 28 Oct 2022 19:39:20 +0200, by Ideenmodellierer
Bugfix motioncontrol frame deactivation:
Tue, 18 Oct 2022 21:21:32 +0200, by Ideenmodellierer
Cleanup warnings:
Tue, 18 Oct 2022 20:56:19 +0200, by Ideenmodellierer
Bugfix Empty menu:
Sun, 25 Sep 2022 21:13:45 +0200, by Ideenmodellierer
Improvment key event detection:
Sun, 25 Sep 2022 21:09:18 +0200, by Ideenmodellierer
Merge
Fri, 19 Aug 2022 11:30:24 +0200, by heinrichsweikamp
1.6.0 release Betatest
Fri, 19 Aug 2022 11:27:44 +0200, by heinrichsweikamp
Update current build for testing Betatest
Sat, 06 Aug 2022 11:10:56 +0200, by heinrichsweikamp
Improvment charge percent visualization: Betatest
Fri, 05 Aug 2022 16:04:52 +0200, by Ideenmodellierer
Added compile switch for Sentinel rebreather option Betatest
Fri, 05 Aug 2022 15:27:01 +0200, by Ideenmodellierer
Improvment external interface usage: Betatest
Fri, 05 Aug 2022 15:26:28 +0200, by Ideenmodellierer
Added Sentinel protocoll support: Betatest
Fri, 05 Aug 2022 15:22:26 +0200, by Ideenmodellierer
Added Sentinel as O2 sensor source: Betatest
Fri, 05 Aug 2022 15:15:01 +0200, by Ideenmodellierer
Added sanity check for temperature and pressure values: Betatest
Fri, 05 Aug 2022 15:13:29 +0200, by Ideenmodellierer
Increased version numbers: Betatest
Fri, 05 Aug 2022 15:10:10 +0200, by Ideenmodellierer
Bugfix Battery charge complete event: Betatest
Fri, 05 Aug 2022 14:56:17 +0200, by Ideenmodellierer
Bugfix automatic switch to o2 sensor custom view: Betatest
Wed, 03 Aug 2022 18:19:03 +0200, by Ideenmodellierer
Ignore automatic setpoint changes during ascend: Betatest
Thu, 02 Jun 2022 20:24:59 +0200, by Ideenmodellierer
Bugfix: Set actual gas after basic dive settings were created: Betatest
Mon, 16 May 2022 20:50:26 +0200, by Ideenmodellierer
Bugfix low ppO2 warning in bailout mode: Betatest
Mon, 25 Apr 2022 21:15:01 +0200, by Ideenmodellierer
Bugfix screen clipping (Flipdisplay mode): Betatest
Mon, 25 Apr 2022 21:10:10 +0200, by Ideenmodellierer
Bugfix visualization better setpoint: Betatest
Mon, 25 Apr 2022 21:07:28 +0200, by Ideenmodellierer
cleanup: Use correct "per" symbol Betatest
Fri, 22 Apr 2022 18:24:43 +0200, by Jan Mulder
Bugfix: deco planner did not initialize properly Betatest
Thu, 21 Apr 2022 21:02:50 +0200, by Jan Mulder
Move include file to common to ... Betatest
Wed, 20 Apr 2022 20:25:04 +0200, by Jan Mulder
Allow longer scrubber time Betatest
Mon, 22 Nov 2021 19:39:11 +0100, by Jan Mulder
Bugfix: Missing flip screen support for charge view Betatest
Wed, 30 Mar 2022 18:07:21 +0200, by Ideenmodellierer
Zusammenf?hren Betatest
Wed, 30 Mar 2022 18:01:29 +0200, by heinrichsweikamp
Show 98% in case of Oxygen as the calibrating gas Betatest
Wed, 30 Mar 2022 18:00:21 +0200, by heinrichsweikamp
Added Charging view: Betatest
Sat, 12 Mar 2022 23:01:11 +0100, by Ideenmodellierer
Support of unknown charging counter values: Betatest
Sat, 12 Mar 2022 22:58:22 +0100, by Ideenmodellierer
Reduce display brightness in case the charger is connected: Betatest
Sat, 12 Mar 2022 22:54:26 +0100, by Ideenmodellierer
Rework charge cycle: Betatest
Sat, 12 Mar 2022 22:49:09 +0100, by Ideenmodellierer
Rework charge cycle: Betatest
Sat, 12 Mar 2022 22:48:45 +0100, by Ideenmodellierer
Increased version number Betatest
Sat, 12 Mar 2022 22:42:56 +0100, by Ideenmodellierer
increase version numbers for upcomming release Betatest
Sat, 12 Mar 2022 14:57:54 +0100, by heinrichsweikamp
update test build Betatest
Fri, 24 Dec 2021 13:40:47 +0100, by heinrichsweikamp
Stability improvment bluetooth startup: Betatest
Tue, 21 Dec 2021 19:36:41 +0100, by Ideenmodellierer
Revert Setbluetooh name changes Betatest
Tue, 21 Dec 2021 19:32:29 +0100, by Ideenmodellierer
PSCR Mode Betatest
Tue, 14 Dec 2021 15:36:10 +0100, by heinrichs weikamp
Undo Rev. 660
Mon, 01 Nov 2021 12:39:34 +0100, by heinrichs weikamp
Add option to reset bluetooth name
Sun, 08 Aug 2021 09:36:23 +0200, by heinrichsweikamp
Update build file for testing
Wed, 28 Apr 2021 09:47:25 +0200, by heinrichs weikamp
Bugfix handling of new menu tab in flipped mode:
Tue, 27 Apr 2021 21:29:26 +0200, by Ideenmodellierer
Update release date
Mon, 26 Apr 2021 15:03:04 +0200, by heinrichs weikamp
Added visualization of scrubber time:
Sun, 25 Apr 2021 20:47:01 +0200, by Ideenmodellierer
Added count down timer for scrubber time:
Sun, 25 Apr 2021 20:42:56 +0200, by Ideenmodellierer
Introduced new menu tab for addition CCR options:
Sun, 25 Apr 2021 20:41:19 +0200, by Ideenmodellierer
Bugfix temperature display Logpage2:
Sun, 25 Apr 2021 20:36:18 +0200, by Ideenmodellierer
Allow setpoint starting at 0.4 ppO2:
Mon, 19 Apr 2021 20:34:53 +0200, by Ideenmodellierer
Automatik setpoint change:
Mon, 19 Apr 2021 20:20:38 +0200, by Ideenmodellierer
Automatik setpoint change:
Mon, 19 Apr 2021 20:19:32 +0200, by Ideenmodellierer
Bugfix consider checkbox in calculation of right aligned and centered position:
Mon, 19 Apr 2021 20:16:24 +0200, by Ideenmodellierer
Motion detection: Enable focus after focus calibration:
Mon, 19 Apr 2021 20:14:20 +0200, by Ideenmodellierer
Integrated selection of bailout in the diluent selection page:
Tue, 13 Apr 2021 19:25:41 +0200, by Ideenmodellierer
Remove battery charge counter from information menu:
Tue, 13 Apr 2021 19:21:14 +0200, by Ideenmodellierer
Small changes in charger state handling:
Tue, 13 Apr 2021 19:18:32 +0200, by Ideenmodellierer
Compile with ENABLE_CHARGER_STATUS_V2
Tue, 30 Mar 2021 10:34:12 +0200, by heinrichs weikamp
Reimplemented charger status generation (deactivated):
Wed, 24 Mar 2021 22:06:00 +0100, by Ideenmodellierer
Do not show focus indicator in case motion detection is suspended:
Wed, 24 Mar 2021 21:28:41 +0100, by Ideenmodellierer
Development Bugfix Deco bars not shown after last deco stop passed:
Thu, 11 Mar 2021 21:45:22 +0100, by Ideenmodellierer
Development bugfix Viewport settings:
Thu, 11 Mar 2021 21:43:43 +0100, by Ideenmodellierer
add build for testing, advance to FW1.5.7, RTE is unchanged since 1.5.6
Thu, 25 Feb 2021 12:20:43 +0100, by heinrichsweikamp
Added last measured PPO2 value to sensor selection dialog:
Wed, 24 Feb 2021 21:45:35 +0100, by Ideenmodellierer
Debounce fallback warning:
Wed, 24 Feb 2021 21:04:07 +0100, by Ideenmodellierer
Debounce fallback warning:
Wed, 24 Feb 2021 21:03:54 +0100, by Ideenmodellierer
Debounce fallback warning:
Wed, 24 Feb 2021 21:03:22 +0100, by Ideenmodellierer
Enable sensor check for Analog PPO2 mode:
Wed, 24 Feb 2021 19:18:26 +0100, by Ideenmodellierer
Added menu structure to allow ppo2 modification in simulator mode:
Tue, 23 Feb 2021 21:58:18 +0100, by Ideenmodellierer
Warnings:
Tue, 23 Feb 2021 21:55:52 +0100, by Ideenmodellierer
Warnings:
Tue, 23 Feb 2021 21:55:26 +0100, by Ideenmodellierer
Warnings:
Tue, 23 Feb 2021 21:54:56 +0100, by Ideenmodellierer
Added functionality to add ppo2 mV offset:
Tue, 23 Feb 2021 21:53:24 +0100, by Ideenmodellierer
Added compile switch for T3_PROFILE menu operation option
Fri, 12 Feb 2021 21:46:36 +0100, by Ideenmodellierer
Improve in / out of focus transitions:
Fri, 12 Feb 2021 21:43:27 +0100, by Ideenmodellierer
Added option to select sensitivity of focus detection:
Fri, 12 Feb 2021 21:37:50 +0100, by Ideenmodellierer
Switch Sector / Scroll detection to vector implementation:
Mon, 08 Feb 2021 21:35:46 +0100, by Ideenmodellierer
Development bugfix: Marker in standard t3 view drawn in wrong direction
Sun, 07 Feb 2021 22:05:32 +0100, by Ideenmodellierer
Improvment frame Handling:
Sun, 07 Feb 2021 22:04:43 +0100, by Ideenmodellierer
Adjustments for flipped display view:
Wed, 03 Feb 2021 21:45:48 +0100, by Ideenmodellierer
Use roll and pitch agles in 0-360 format:
Wed, 03 Feb 2021 21:44:22 +0100, by Ideenmodellierer
Added minilog functions to allow marker synchronisation:
Wed, 27 Jan 2021 22:12:44 +0100, by Ideenmodellierer
Added t3 quick menu for marker synchronisation:
Wed, 27 Jan 2021 22:10:11 +0100, by Ideenmodellierer
Development bugfix: focus state not remembered:
Wed, 27 Jan 2021 22:04:45 +0100, by Ideenmodellierer
Development bugfix: Low battery warning was interpretated as marker:
Wed, 27 Jan 2021 22:03:11 +0100, by Ideenmodellierer
Development bugfix: show replay symbol only for the selected dive:
Wed, 27 Jan 2021 21:58:46 +0100, by Ideenmodellierer
Moved non critical functions from timer interrupt to main loop:
Wed, 27 Jan 2021 21:56:48 +0100, by Ideenmodellierer
Added "Set Marker" to T3 quick menu:
Wed, 20 Jan 2021 20:05:05 +0100, by Ideenmodellierer
Added "Set Marker" to T3 quick menu:
Fri, 15 Jan 2021 21:33:07 +0100, by Ideenmodellierer
Bugfix inverted whitspace:
Fri, 15 Jan 2021 21:20:29 +0100, by Ideenmodellierer
Suspend MotionDetection events while diver is operationg the OSTC:
Thu, 14 Jan 2021 21:25:15 +0100, by Ideenmodellierer
Added access to logbook marker data:
Thu, 14 Jan 2021 20:38:28 +0100, by Ideenmodellierer
Bugfix: CalibViewport were shown even in case the compile switch had not been set:
Thu, 14 Jan 2021 19:17:28 +0100, by Ideenmodellierer
Update RTE required value for release
Fri, 05 Feb 2021 14:53:50 +0100, by heinrichsweikamp
Added tag v1.5.6 release for changeset 06ec1da5e105
Fri, 05 Feb 2021 14:50:18 +0100, by heinrichsweikamp
1.5.6 release v1.5.6 release
Fri, 05 Feb 2021 14:50:05 +0100, by heinrichsweikamp
change O2_CALIB_FRACTION_O2 to 0.98
Thu, 07 Jan 2021 09:53:04 +0100, by heinrichsweikamp
Merged menu items of viewport and motion control:
Wed, 06 Jan 2021 21:01:00 +0100, by Ideenmodellierer
T3 profile view: Added visualization of deco data
Wed, 06 Jan 2021 19:41:43 +0100, by Ideenmodellierer
Added replay data scaling in case life data is longer than replay block
Tue, 05 Jan 2021 20:35:01 +0100, by Ideenmodellierer
Bugfix T3 skip deactivated views:
Mon, 04 Jan 2021 22:49:07 +0100, by Ideenmodellierer
Added compile switch for new T3 View Profile
Mon, 04 Jan 2021 22:45:37 +0100, by Ideenmodellierer
Bugfix T3 skip deactivated views:
Mon, 04 Jan 2021 21:48:31 +0100, by Ideenmodellierer
New replay block for T3 profile:
Mon, 04 Jan 2021 21:41:51 +0100, by Ideenmodellierer
MotionControl-Sector: Map sectors during switch T7 <=> T3:
Mon, 04 Jan 2021 21:38:28 +0100, by Ideenmodellierer
Added functionality to select a dive to be shown in the T3 profile view:
Mon, 04 Jan 2021 21:35:38 +0100, by Ideenmodellierer
Bugfix Selection of primary view:
Mon, 04 Jan 2021 21:32:39 +0100, by Ideenmodellierer
Added compile switch for new T3 View Profile
Mon, 04 Jan 2021 21:30:04 +0100, by Ideenmodellierer
Added PrintGraph option to skip invalid data entries:
Mon, 04 Jan 2021 21:24:24 +0100, by Ideenmodellierer
MotionCtrl - Sectorview Map sectors directly to custom views:
Sun, 03 Jan 2021 14:43:16 +0100, by Ideenmodellierer
Minor: Comment translation into English
Wed, 06 Jan 2021 22:02:49 +0100, by heinrichsweikamp
Align VPM tag in log list to be at same position as GF tag:
Tue, 22 Dec 2020 22:23:11 +0100, by Ideenmodellierer
Minor: Update the documentation for building the code
Thu, 17 Dec 2020 10:58:28 +0100, by heinrichsweikamp
Update current build, "RTErequired" value and release date
Thu, 17 Dec 2020 09:52:12 +0100, by heinrichsweikamp
update ostc4pack sample files
Wed, 16 Dec 2020 09:43:11 +0100, by heinrichsweikamp
Motion control: Jump back to primary view if focus is lost:
Sun, 13 Dec 2020 18:31:40 +0100, by Ideenmodellierer
Reduced view angle and number of vusiualized custom views in setor mode:
Sun, 13 Dec 2020 18:29:12 +0100, by Ideenmodellierer
Added option for 100% o2 calibration:
Sat, 12 Dec 2020 21:05:11 +0100, by Ideenmodellierer
Solved minor warnings
Sat, 12 Dec 2020 20:54:31 +0100, by Ideenmodellierer
Show Fallback if no valid sensor value is available:
Sat, 12 Dec 2020 20:52:58 +0100, by Ideenmodellierer
Added ex Interface measurement restart in case of i2c disturbance:
Sat, 12 Dec 2020 19:18:57 +0100, by Ideenmodellierer
Bugfix bad resolution of compass LSM303AGR:
Sat, 12 Dec 2020 19:16:37 +0100, by Ideenmodellierer
Minor: Functional inert cleanup of some unused variables
Thu, 03 Dec 2020 13:17:32 +0100, by heinrichsweikamp
Rework pitch detection:
Sun, 29 Nov 2020 23:02:11 +0100, by Ideenmodellierer
Handle o2 voltage values < 0.5mV as invalid:
Sun, 29 Nov 2020 22:58:11 +0100, by Ideenmodellierer
Return to o2 values:
Sun, 29 Nov 2020 22:55:31 +0100, by Ideenmodellierer
Change style of viewport calibration menu:
Sun, 29 Nov 2020 22:53:33 +0100, by Ideenmodellierer
Improved focus detection:
Wed, 25 Nov 2020 20:26:01 +0100, by Ideenmodellierer
Update String "Blickwinkel":
Wed, 25 Nov 2020 20:19:50 +0100, by Ideenmodellierer
Added debug view to viewport calibration:
Wed, 25 Nov 2020 20:18:22 +0100, by Ideenmodellierer
Reactivate compass parameter stored in NVM:
Wed, 25 Nov 2020 20:16:20 +0100, by Ideenmodellierer
Try to reduce legth of log entry string:
Mon, 30 Nov 2020 20:55:23 +0100, by Ideenmodellierer
Added new section "lower.font":
Mon, 30 Nov 2020 20:52:49 +0100, by Ideenmodellierer
Minor: Update the documentation for building the code
Sun, 29 Nov 2020 11:41:03 +0100, by heinrichsweikamp
-Add 12HR Time Support
Tue, 24 Nov 2020 13:22:23 -0600, by izzni
add current build
Sat, 21 Nov 2020 17:41:59 +0100, by heinrichsweikamp
Bugfix center / right alignment if dualfont is used:
Sun, 15 Nov 2020 20:12:19 +0100, by Ideenmodellierer
Bugfix One or more deactivated sensors hide sensor display:
Sun, 15 Nov 2020 20:09:31 +0100, by Ideenmodellierer
Refine o2 sensor diagnostic functions:
Sun, 15 Nov 2020 20:01:56 +0100, by Ideenmodellierer
Added ADC sensor interface to O2 sensore menu structure:
Sun, 15 Nov 2020 19:58:14 +0100, by Ideenmodellierer
Solved minor warnings
Sun, 15 Nov 2020 19:54:36 +0100, by Ideenmodellierer
Added O2 sensor source and calibration parameters to setting structure
Sun, 15 Nov 2020 19:53:09 +0100, by Ideenmodellierer
Check if HW evaluation was performed:
Sun, 15 Nov 2020 19:52:03 +0100, by Ideenmodellierer
Changed operation mode of RecoverSampleIndex:
Thu, 12 Nov 2020 20:06:04 +0100, by Ideenmodellierer
Stabilityfix: Do not trust lastDiveLogID == 0 at startup:
Thu, 12 Nov 2020 20:03:00 +0100, by Ideenmodellierer
Switch source of o2 sensor data depending on availability of external ADC:
Thu, 12 Nov 2020 19:54:58 +0100, by Ideenmodellierer
Added HW_Info to Discovery <=> RTE data exchange:
Thu, 12 Nov 2020 19:48:28 +0100, by Ideenmodellierer
Added external ADC interface functionality (MCP3424):
Thu, 12 Nov 2020 19:46:03 +0100, by Ideenmodellierer
Added color indicator for focus state:
Sun, 08 Nov 2020 18:49:54 +0100, by Ideenmodellierer
Added menu structure to acces viewport calibration:
Sun, 08 Nov 2020 18:46:46 +0100, by Ideenmodellierer
Added viewport functionality:
Sun, 08 Nov 2020 18:43:19 +0100, by Ideenmodellierer
Make sure motion detection settings are set to default values:
Sun, 08 Nov 2020 18:38:53 +0100, by Ideenmodellierer
Only execute motion detection functions if features is enabled:
Sun, 08 Nov 2020 18:36:02 +0100, by Ideenmodellierer
Update roll and pitch value in simulation mode:
Sun, 08 Nov 2020 16:38:43 +0100, by Ideenmodellierer
Added viewport calibration to dive menu:
Mon, 02 Nov 2020 21:17:45 +0100, by Ideenmodellierer
Added new settings for Viewport:
Mon, 02 Nov 2020 21:15:42 +0100, by Ideenmodellierer
Add I2C address for external bulkhead ADC (Hardware gen 3 only) to i2c.h
Tue, 03 Nov 2020 12:47:51 +0100, by heinrichsweikamp
add current build
Mon, 02 Nov 2020 12:13:02 +0100, by heinrichsweikamp
Shortend t3 view names:
Sun, 11 Oct 2020 18:33:19 +0200, by Ideenmodellierer
Added new t3 view showing first deco stop and tts in parallel:
Sat, 10 Oct 2020 21:02:05 +0200, by Ideenmodellierer
Added default view selection and auto return to view to t3 visualization:
Sat, 10 Oct 2020 18:34:10 +0200, by Ideenmodellierer
Bugfix return from submenu in t3 view:
Sat, 10 Oct 2020 18:30:13 +0200, by Ideenmodellierer
Added inertia simulation for compass heading:
Sat, 10 Oct 2020 16:59:18 +0200, by Ideenmodellierer
BugFix firmware downgrade to version with less settings:
Sat, 10 Oct 2020 13:51:44 +0200, by Ideenmodellierer
Added center / right alignment option to custom text display:
Wed, 07 Oct 2020 18:07:10 +0200, by Ideenmodellierer
Changed visualization of Depth / temperatur / debugview entry
Wed, 07 Oct 2020 17:15:27 +0200, by Ideenmodellierer
Increased max value for surface pressure:
Wed, 07 Oct 2020 17:12:44 +0200, by Ideenmodellierer
Added tag 1.5.5 release for changeset 02e7e11fdbe8
Sun, 04 Oct 2020 15:50:43 +0200, by heinrichsweikamp
increase version numbers, compile with TRUST_LOG_CONSISTENCY switch 1.5.5 release
Fri, 25 Sep 2020 11:13:03 +0200, by heinrichsweikamp
add current build
Wed, 16 Sep 2020 10:52:57 +0200, by heinrichsweikamp
Bugfix custom view selection dialog:
Tue, 15 Sep 2020 20:57:04 +0200, by Ideenmodellierer
Bugfix: No need to consider surface custom view in count of enabled view:
Tue, 15 Sep 2020 20:54:54 +0200, by Ideenmodellierer
Added skip condition in custom view selection:
Tue, 15 Sep 2020 20:52:39 +0200, by Ideenmodellierer
Added new option to gas configuration: "Off":
Sun, 13 Sep 2020 20:59:38 +0200, by Ideenmodellierer
Do not show gases in "Off" state in custom gas list:
Sun, 13 Sep 2020 20:58:37 +0200, by Ideenmodellierer
Added new option to gas configuration: "Off":
Sun, 13 Sep 2020 20:55:54 +0200, by Ideenmodellierer
Change color ID used in strings for light grey:
Sun, 13 Sep 2020 20:49:58 +0200, by Ideenmodellierer
Minor: Removed duplicated definition of number of available gases
Sun, 13 Sep 2020 20:44:50 +0200, by Ideenmodellierer
Changed string for data view selections:
Thu, 10 Sep 2020 20:52:47 +0200, by Ideenmodellierer
Added compile switch for motion control:
Thu, 10 Sep 2020 20:51:36 +0200, by Ideenmodellierer
Move Bigfont and motion Ctrl selection menu out of custom view submenu:
Thu, 10 Sep 2020 20:47:48 +0200, by Ideenmodellierer
Moved custom view menu to new tab:
Tue, 08 Sep 2020 21:24:14 +0200, by Ideenmodellierer
Reset Safety Stop display in case of a new descend:
Sun, 06 Sep 2020 22:11:51 +0200, by Ideenmodellierer
Added T3_gaslist:
Sun, 06 Sep 2020 21:17:59 +0200, by Ideenmodellierer
Added color coding for cv gas list:
Sun, 06 Sep 2020 21:15:34 +0200, by Ideenmodellierer
Added quick menu function to big font view:
Sun, 06 Sep 2020 21:13:22 +0200, by Ideenmodellierer
Added missing display of button labels in refresh function:
Sun, 06 Sep 2020 21:09:37 +0200, by Ideenmodellierer
Properly send compass 3 into sleepmode (end-2019 hardware)
Wed, 16 Sep 2020 10:30:28 +0200, by heinrichsweikamp
Merge
Mon, 31 Aug 2020 20:06:59 +0200, by heinrichsweikamp
Added new strings for the selection of T3 custom views
Sun, 30 Aug 2020 17:31:29 +0200, by Ideenmodellierer
Minor adaptions in page layout:
Sun, 30 Aug 2020 17:30:54 +0200, by Ideenmodellierer
Display warning in t7 using centered strings
Sun, 30 Aug 2020 17:26:52 +0200, by Ideenmodellierer
Show page number in small letters if more than 8 tabs are active
Sun, 30 Aug 2020 17:26:00 +0200, by Ideenmodellierer
Reimplementation of tMenuEdit_select:
Sun, 30 Aug 2020 17:23:44 +0200, by Ideenmodellierer
Added new menu tab into call structure
Sun, 30 Aug 2020 17:20:16 +0200, by Ideenmodellierer
Added new top level menu for customization of views
Sun, 30 Aug 2020 17:19:23 +0200, by Ideenmodellierer
Removed second big font profile
Sun, 30 Aug 2020 17:14:31 +0200, by Ideenmodellierer
Added worst case plausibility check (disabled by compile switch)
Mon, 24 Aug 2020 19:59:28 +0200, by Ideenmodellierer
Bugfix display of disabled screen.
Mon, 24 Aug 2020 19:53:27 +0200, by Ideenmodellierer
Bugfix display of disabled screen.
Mon, 24 Aug 2020 19:43:13 +0200, by Ideenmodellierer
Bugfix right alignment of dualfont strings
Mon, 24 Aug 2020 19:39:28 +0200, by Ideenmodellierer
Added possibility to switch between "classic" bigfont views and a selection with a new information combination
Mon, 24 Aug 2020 19:36:18 +0200, by Ideenmodellierer
Added compile switch to enable / disable new BigFont layout
Mon, 24 Aug 2020 19:31:05 +0200, by Ideenmodellierer
Added dew parameter to enable selection of customer BigFont screens to be displayed
Mon, 24 Aug 2020 19:30:15 +0200, by Ideenmodellierer
Added worst case plausibility check (disabled by compile switch)
Mon, 24 Aug 2020 19:59:28 +0200, by Ideenmodellierer
Bugfix display of disabled screen.
Mon, 24 Aug 2020 19:53:27 +0200, by Ideenmodellierer
Bugfix display of disabled screen.
Mon, 24 Aug 2020 19:43:13 +0200, by Ideenmodellierer
Bugfix right alignment of dualfont strings
Mon, 24 Aug 2020 19:39:28 +0200, by Ideenmodellierer
Added possibility to switch between "classic" bigfont views and a selection with a new information combination
Mon, 24 Aug 2020 19:36:18 +0200, by Ideenmodellierer
Added compiler switch for existing debug view parameter
Thu, 20 Aug 2020 21:25:38 +0200, by Ideenmodellierer
Added tag v1.5.4 release for changeset e9ca66ce36e5
Mon, 10 Aug 2020 15:53:45 +0200, by heinrichsweikamp

less more | rev 730: (0) -240 tip

Mercurial > public > ostc4

graph