Mercurial > public > ostc4

log

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
less more | rev 811: (0) -300 -100 -60 +60 +100 tip
age author description
2023-08-27 Ideenmodellierer Added function to skip lines which are not needed for operation:
2023-08-27 Ideenmodellierer Only jump to Sensor view during charging if sensors are connected:
2023-08-27 Ideenmodellierer DevBugfix CO2 sensor in streaming mode:
2023-08-26 heinrichsweikamp Testing build
2023-08-26 heinrichsweikamp Zusammenf?hren
2023-08-26 heinrichsweikamp Update Firmware version number
2023-08-21 heinrichsweikamp Adds a simple countdown timer, available as a custom view in surface and dive mode.
2023-08-10 Ideenmodellierer Cleanup initialisation code:
2023-08-10 Ideenmodellierer Cleanup initialisation / deinitialization:
2023-08-10 Ideenmodellierer Removed dependency to protocol setting:
2023-08-10 Ideenmodellierer Update RTE version number
2023-08-08 Ideenmodellierer Cleanup warnings
2023-08-07 Ideenmodellierer Added CO2 mirrow instance:
2023-08-07 Ideenmodellierer Migrated CO2 protocol implementation to new format:
2023-07-31 Ideenmodellierer Use mirror sensortype for visualization:
2023-07-31 Ideenmodellierer Expanded Sensor map structure:
2023-07-31 Ideenmodellierer Moved DiveO2 sensor specific funtionality into separated file:
2023-07-31 Ideenmodellierer Restructure UART based sensor handling:
2023-07-27 Ideenmodellierer Bugfix PSCR Settings in Simulator Mode:
2023-08-05 heinrichsweikamp Avoid a configuration warning after the firmware upgrade by disabling automatic setpoint switching. This makes sure the user's automatic setpoint configuration is not overwritten by the validity checks if the settings are not in the correct spots for the new configuration. Users will have to manually re-create the automatic setpoint switching configuration in the new format;
2023-08-02 heinrichsweikamp update current build for testing
2023-07-25 heinrichsweikamp Fix bug introduced in 04b98a2, causing the deco planner to not show deco stops.
2023-07-12 heinrichsweikamp When using automatic setpoint switching, allow the user to set an arbitrary ppO2 as a custom setpoint during the dive.
2023-07-04 heinrichsweikamp Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
2023-06-04 Ideenmodellierer Dev Bugfx Empty buffer indication and stability improvments:
2023-06-04 Ideenmodellierer Cleanup sensor data interface:
2023-05-31 heinrichsweikamp Change support from Pyroscience -> DiveO2 sensors
2023-05-30 Ideenmodellierer Bugfixloop UART multiplexer integration:
2023-05-29 Ideenmodellierer Update digital O2 sensor information:
2023-05-29 Ideenmodellierer Sensor status support for multiplexed DiveO2 sensors:
2023-05-29 Ideenmodellierer Update real multiplexer implementation:
2023-05-23 Ideenmodellierer Discovery<=>SmallCPU inferface update:
2023-05-23 Ideenmodellierer Added UART multiplexer support for DiveO2:
2023-05-22 heinrichsweikamp Zusammenf?hren
2023-05-22 heinrichsweikamp This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
2023-05-18 heinrichsweikamp Add support for a configurable compass declination in a range of -99 to 99 degrees.
2023-05-11 heinrichsweikamp Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
2023-05-10 heinrichsweikamp more menu items for the compass menu: Delete bearing, and reset to land based bearing. I have also re-enabled the real time bearing display in the menu - makes it easier to set the correct bearing. (mikeller)
2023-05-10 heinrichsweikamp Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
2023-04-23 izzni Fix character truncation when screen is flipped. This was causing the dive computer to lock up when in English Units with the screen flipped when the first decompression stop is shown using FONT_105.
2023-04-21 heinrichsweikamp Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
2023-04-21 heinrichsweikamp CCR overview in surface mode. Makes it easy to quickly check that all settings (mode, setpoints, diluent, scrubber timer) are correct when preparing to dive (also makes the OC gas list available in surface mode for the same reason).
2023-04-21 heinrichsweikamp Deactivation of the 'fallback' option when the CCR mode is set to 'Fixed' - this makes it a little clearer that the option has no influence in this mode.
2023-04-13 heinrichsweikamp 1.6.2 release
2023-04-12 heinrichsweikamp Update build for testing
2023-04-12 heinrichsweikamp change button default responsiveness to 100
2023-04-12 heinrichsweikamp After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
2023-03-27 heinrichsweikamp Update build for testing
2023-03-26 heinrichsweikamp increase HAL_Delay to 10ms for cold-start-button reset
2023-03-26 heinrichsweikamp Preparing a 1.6.2 release candidate
2023-03-21 heinrichsweikamp Fix/handle negative scrubber timer values
2023-03-21 heinrichsweikamp Quit simualted dives after the dive time set in the SIM tab.
2023-03-17 heinrichsweikamp Some compass improvements from mikeller
2023-03-15 heinrichsweikamp - Colours for scrubber display when time remaining falls below a threshold value
2023-03-07 Ideenmodellierer Dev Bugfix: ignore analog out of bounds limits for DiveO2 sensor:
2023-03-07 Ideenmodellierer Added visualization of CO2 during dive:
2023-03-07 Ideenmodellierer Cleanup display of multiple warnings in T3 (Big font) view:
2023-03-07 Ideenmodellierer Only show autodetection in sensor menu if external interface is present:
2023-03-07 Ideenmodellierer Updated outdated comment
2023-03-07 Ideenmodellierer Dev Bugfix: Alignment problem in lifedata structure:
less more | rev 811: (0) -300 -100 -60 +60 +100 tip