| Tue, 25 Jul 2023 14:48:58 +0200 |
heinrichsweikamp |
Fix bug introduced in 04b98a2, causing the deco planner to not show deco stops.
|
| Wed, 12 Jul 2023 10:13:25 +0200 |
heinrichsweikamp |
When using automatic setpoint switching, allow the user to set an arbitrary ppO2 as a custom setpoint during the dive.
|
| Tue, 04 Jul 2023 14:39:06 +0200 |
heinrichsweikamp |
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
|
| Sun, 04 Jun 2023 21:59:26 +0200 |
Ideenmodellierer |
Dev Bugfx Empty buffer indication and stability improvments:
|
| Sun, 04 Jun 2023 21:54:24 +0200 |
Ideenmodellierer |
Cleanup sensor data interface:
|
| Wed, 31 May 2023 08:44:07 +0200 |
heinrichsweikamp |
Change support from Pyroscience -> DiveO2 sensors
|
| Tue, 30 May 2023 18:44:20 +0200 |
Ideenmodellierer |
Bugfixloop UART multiplexer integration:
|
| Mon, 29 May 2023 20:26:38 +0200 |
Ideenmodellierer |
Update digital O2 sensor information:
|
| Mon, 29 May 2023 20:22:15 +0200 |
Ideenmodellierer |
Sensor status support for multiplexed DiveO2 sensors:
|
| Mon, 29 May 2023 18:26:55 +0200 |
Ideenmodellierer |
Update real multiplexer implementation:
|
| Tue, 23 May 2023 21:50:19 +0200 |
Ideenmodellierer |
Discovery<=>SmallCPU inferface update:
|
| Tue, 23 May 2023 21:45:34 +0200 |
Ideenmodellierer |
Added UART multiplexer support for DiveO2:
|
| Mon, 22 May 2023 09:15:09 +0200 |
heinrichsweikamp |
Zusammenf?hren
|
| Mon, 22 May 2023 09:14:27 +0200 |
heinrichsweikamp |
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
|
| Thu, 18 May 2023 09:49:17 +0200 |
heinrichsweikamp |
Add support for a configurable compass declination in a range of -99 to 99 degrees.
|
| Thu, 11 May 2023 12:13:03 +0200 |
heinrichsweikamp |
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
|
| Wed, 10 May 2023 16:25:39 +0200 |
heinrichsweikamp |
more menu items for the compass menu: Delete bearing, and reset to land based bearing. I have also re-enabled the real time bearing display in the menu - makes it easier to set the correct bearing. (mikeller)
|
| Wed, 10 May 2023 16:24:57 +0200 |
heinrichsweikamp |
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
|
| Sat, 22 Apr 2023 21:11:50 -0500 |
izzni |
Fix character truncation when screen is flipped. This was causing the dive computer to lock up when in English Units with the screen flipped when the first decompression stop is shown using FONT_105.
|
| Fri, 21 Apr 2023 09:48:23 +0200 |
heinrichsweikamp |
Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
|
| Fri, 21 Apr 2023 09:47:44 +0200 |
heinrichsweikamp |
CCR overview in surface mode. Makes it easy to quickly check that all settings (mode, setpoints, diluent, scrubber timer) are correct when preparing to dive (also makes the OC gas list available in surface mode for the same reason).
|
| Fri, 21 Apr 2023 09:47:06 +0200 |
heinrichsweikamp |
Deactivation of the 'fallback' option when the CCR mode is set to 'Fixed' - this makes it a little clearer that the option has no influence in this mode.
|
| Thu, 13 Apr 2023 09:35:43 +0200 |
heinrichsweikamp |
1.6.2 release
|
| Wed, 12 Apr 2023 09:56:00 +0200 |
heinrichsweikamp |
Update build for testing
|
| Wed, 12 Apr 2023 09:30:15 +0200 |
heinrichsweikamp |
change button default responsiveness to 100
|
| Wed, 12 Apr 2023 09:24:44 +0200 |
heinrichsweikamp |
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
|
| Mon, 27 Mar 2023 10:04:53 +0200 |
heinrichsweikamp |
Update build for testing
|
| Sun, 26 Mar 2023 18:34:30 +0200 |
heinrichsweikamp |
increase HAL_Delay to 10ms for cold-start-button reset
|
| Sun, 26 Mar 2023 11:27:29 +0200 |
heinrichsweikamp |
Preparing a 1.6.2 release candidate
|
| Tue, 21 Mar 2023 12:57:37 +0100 |
heinrichsweikamp |
Fix/handle negative scrubber timer values
|
