| 23 months ago |
heinrichsweikamp |
Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
|
| 23 months ago |
heinrichsweikamp |
CCR overview in surface mode. Makes it easy to quickly check that all settings (mode, setpoints, diluent, scrubber timer) are correct when preparing to dive (also makes the OC gas list available in surface mode for the same reason).
|
| 23 months ago |
heinrichsweikamp |
Deactivation of the 'fallback' option when the CCR mode is set to 'Fixed' - this makes it a little clearer that the option has no influence in this mode.
|
| 23 months ago |
heinrichsweikamp |
1.6.2 release
|
| 23 months ago |
heinrichsweikamp |
Update build for testing
|
| 23 months ago |
heinrichsweikamp |
change button default responsiveness to 100
|
| 23 months ago |
heinrichsweikamp |
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
|
| 2023-03-27 |
heinrichsweikamp |
Update build for testing
|
| 2023-03-26 |
heinrichsweikamp |
increase HAL_Delay to 10ms for cold-start-button reset
|
| 2023-03-26 |
heinrichsweikamp |
Preparing a 1.6.2 release candidate
|
| 2023-03-21 |
heinrichsweikamp |
Fix/handle negative scrubber timer values
|
| 2023-03-21 |
heinrichsweikamp |
Quit simualted dives after the dive time set in the SIM tab.
|
| 2023-03-17 |
heinrichsweikamp |
Some compass improvements from mikeller
|
| 2023-03-15 |
heinrichsweikamp |
- Colours for scrubber display when time remaining falls below a threshold value
|
| 2023-03-07 |
Ideenmodellierer |
Dev Bugfix: ignore analog out of bounds limits for DiveO2 sensor:
|
| 2023-03-07 |
Ideenmodellierer |
Added visualization of CO2 during dive:
|
| 2023-03-07 |
Ideenmodellierer |
Cleanup display of multiple warnings in T3 (Big font) view:
|
| 2023-03-07 |
Ideenmodellierer |
Only show autodetection in sensor menu if external interface is present:
|
| 2023-03-07 |
Ideenmodellierer |
Updated outdated comment
|
| 2023-03-07 |
Ideenmodellierer |
Dev Bugfix: Alignment problem in lifedata structure:
|
| 2023-03-13 |
Ideenmodellierer |
resolv merge
|
| 2023-03-05 |
Ideenmodellierer |
Avoid blinking in customer view selection page:
|
| 2023-03-13 |
Ideenmodellierer |
Added enum for Co2 display
|
| 2023-03-05 |
Ideenmodellierer |
Added display of co2 ppm values:
|
| 2023-03-05 |
Ideenmodellierer |
Added pressure compensation to CO2 detection:
|
| 2023-02-21 |
Ideenmodellierer |
Code cleanup sensors under development:
|
| 2023-02-19 |
Ideenmodellierer |
Update Sentinel protocol:
|
| 2023-02-19 |
Ideenmodellierer |
Added DiveO2 fatal error detection:
|
| 2023-02-19 |
Ideenmodellierer |
Enable start dive in Big font display:
|
| 2023-02-19 |
Ideenmodellierer |
Update Sentinel protocol:
|
| 2023-02-02 |
Ideenmodellierer |
Added button lock after wakeup in surface mode:
|
| 2023-02-02 |
Ideenmodellierer |
Added button lock after wakeup in surface mode:
|
| 2023-02-02 |
Ideenmodellierer |
Enable start dive in Big font display:
|
| 2023-02-02 |
Ideenmodellierer |
Added data init function for external interface:
|
| 2023-03-06 |
heinrichsweikamp |
NEW: Add mini compass with marker declination indication
|
| 2023-03-03 |
heinrichsweikamp |
Fixed logbook download after switch from CCR to extra (OC) gas if the extra gas
|
| 2023-02-14 |
heinrichsweikamp |
Fixed invalid setpoint (0.0) used after switch from CCR to extra (OC) gas
|
| 2023-01-15 |
Ideenmodellierer |
Removed interface selection from sensor menu:
|
| 2023-01-15 |
Ideenmodellierer |
Optical sensor as default:
|
| 2023-01-15 |
Ideenmodellierer |
Fix compiler switch:
|
| 2023-01-15 |
Ideenmodellierer |
Improvment sensor Autodetection:
|
| 2023-01-14 |
Ideenmodellierer |
Update sensor menu support for automatic sensor detection:
|
| 2023-01-14 |
Ideenmodellierer |
Added auto detection functionality for sensors connected to the external interface:
|
| 2023-01-14 |
Ideenmodellierer |
Added sensor map to Firmware <=> RTE inferface:
|
| 2023-01-14 |
Ideenmodellierer |
Enabled CO2 support for beta test phase:
|
| 2023-01-14 |
Ideenmodellierer |
Bugfix data synchronization after RTE start:
|
| 2023-01-07 |
Ideenmodellierer |
Update CO2 sensor implementation:
|
| 2023-01-05 |
Ideenmodellierer |
Development feature: external pressure sensor
|
| 2023-01-05 |
Ideenmodellierer |
DigO2 added raw data request:
|
| 2023-01-05 |
Ideenmodellierer |
Show saturation in large font (T3) view:
|
| 2023-01-05 |
Ideenmodellierer |
DigO2 added raw data request:
|
| 2023-01-03 |
Ideenmodellierer |
Bugfix set date (year):
|
| 2022-11-27 |
heinrichsweikamp |
Add build for 1.6.1 beta / RTE 2.9 (Support for DiveO2 solid state oxygen sensors)
|
| 2022-11-20 |
Ideenmodellierer |
Updated menu structure to support new sensor information page:
|
| 2022-11-20 |
Ideenmodellierer |
Added new info page for extended sensor data:
|
| 2022-11-20 |
Ideenmodellierer |
Added customizable data area for specific sensor data:
|
| 2022-11-20 |
Ideenmodellierer |
Increased version number and set beta label
|
| 2022-11-20 |
Ideenmodellierer |
Added customizable data area for specific sensor data:
|
| 2022-11-20 |
Ideenmodellierer |
Increased version number and set beta label
|
| 2022-11-20 |
Ideenmodellierer |
Bugfix PSCR menu button label:
|
