ostc4: revision graph

graph

less more | rev 812: (0) -300 -100 -60 +60 +100 tip

Testing build
2023-08-31, by heinrichsweikamp
Added function to skip lines which are not needed for operation:
2023-08-27, by Ideenmodellierer
Only jump to Sensor view during charging if sensors are connected:
2023-08-27, by Ideenmodellierer
DevBugfix CO2 sensor in streaming mode:
2023-08-27, by Ideenmodellierer
Testing build
2023-08-26, by heinrichsweikamp
Zusammenf?hren
2023-08-26, by heinrichsweikamp
Update Firmware version number
2023-08-26, by heinrichsweikamp
Adds a simple countdown timer, available as a custom view in surface and dive mode.
2023-08-21, by heinrichsweikamp
Cleanup initialisation code:
2023-08-10, by Ideenmodellierer
Cleanup initialisation / deinitialization:
2023-08-10, by Ideenmodellierer
Removed dependency to protocol setting:
2023-08-10, by Ideenmodellierer
Update RTE version number
2023-08-10, by Ideenmodellierer
Cleanup warnings
2023-08-08, by Ideenmodellierer
Added CO2 mirrow instance:
2023-08-07, by Ideenmodellierer
Migrated CO2 protocol implementation to new format:
2023-08-07, by Ideenmodellierer
Use mirror sensortype for visualization:
2023-07-31, by Ideenmodellierer
Expanded Sensor map structure:
2023-07-31, by Ideenmodellierer
Moved DiveO2 sensor specific funtionality into separated file:
2023-07-31, by Ideenmodellierer
Restructure UART based sensor handling:
2023-07-31, by Ideenmodellierer
Bugfix PSCR Settings in Simulator Mode:
2023-07-27, by Ideenmodellierer
Avoid a configuration warning after the firmware upgrade by disabling automatic setpoint switching. This makes sure the user's automatic setpoint configuration is not overwritten by the validity checks if the settings are not in the correct spots for the new configuration. Users will have to manually re-create the automatic setpoint switching configuration in the new format;
2023-08-05, by heinrichsweikamp
update current build for testing
2023-08-02, by heinrichsweikamp
Fix bug introduced in 04b98a2, causing the deco planner to not show deco stops.
2023-07-25, by heinrichsweikamp
When using automatic setpoint switching, allow the user to set an arbitrary ppO2 as a custom setpoint during the dive.
2023-07-12, by heinrichsweikamp
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
2023-07-04, by heinrichsweikamp
Dev Bugfx Empty buffer indication and stability improvments:
2023-06-04, by Ideenmodellierer
Cleanup sensor data interface:
2023-06-04, by Ideenmodellierer
Change support from Pyroscience -> DiveO2 sensors
2023-05-31, by heinrichsweikamp
Bugfixloop UART multiplexer integration:
2023-05-30, by Ideenmodellierer
Update digital O2 sensor information:
2023-05-29, by Ideenmodellierer
Sensor status support for multiplexed DiveO2 sensors:
2023-05-29, by Ideenmodellierer
Update real multiplexer implementation:
2023-05-29, by Ideenmodellierer
Discovery<=>SmallCPU inferface update:
2023-05-23, by Ideenmodellierer
Added UART multiplexer support for DiveO2:
2023-05-23, by Ideenmodellierer
Zusammenf?hren
2023-05-22, by heinrichsweikamp
This is only showing if one of the compass views is visible. It should make it possible to verify that a correct heading is set as the user can see the compass readout when pushing the button. (mikeller)
2023-05-22, by heinrichsweikamp
Add support for a configurable compass declination in a range of -99 to 99 degrees.
2023-05-18, by heinrichsweikamp
Add a shortcuts to change the setpoint to the loop to the 'normal' display when diving. It is only shown when diving in CCR mode and on the loop.
2023-05-11, by heinrichsweikamp
more menu items for the compass menu: Delete bearing, and reset to land based bearing. I have also re-enabled the real time bearing display in the menu - makes it easier to set the correct bearing. (mikeller)
2023-05-10, by heinrichsweikamp
Menu shortcut for bailout / return to circuit when diving in CCR mode (mikeller)
2023-05-10, by heinrichsweikamp
Fix character truncation when screen is flipped. This was causing the dive computer to lock up when in English Units with the screen flipped when the first decompression stop is shown using FONT_105.
2023-04-23, by izzni
Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
2023-04-21, by heinrichsweikamp
CCR overview in surface mode. Makes it easy to quickly check that all settings (mode, setpoints, diluent, scrubber timer) are correct when preparing to dive (also makes the OC gas list available in surface mode for the same reason).
2023-04-21, by heinrichsweikamp
Deactivation of the 'fallback' option when the CCR mode is set to 'Fixed' - this makes it a little clearer that the option has no influence in this mode.
2023-04-21, by heinrichsweikamp
1.6.2 release
2023-04-13, by heinrichsweikamp
Update build for testing
2023-04-12, by heinrichsweikamp
change button default responsiveness to 100
2023-04-12, by heinrichsweikamp
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
2023-04-12, by heinrichsweikamp
Update build for testing
2023-03-27, by heinrichsweikamp
increase HAL_Delay to 10ms for cold-start-button reset
2023-03-26, by heinrichsweikamp
Preparing a 1.6.2 release candidate
2023-03-26, by heinrichsweikamp
Fix/handle negative scrubber timer values
2023-03-21, by heinrichsweikamp
Quit simualted dives after the dive time set in the SIM tab.
2023-03-21, by heinrichsweikamp
Some compass improvements from mikeller
2023-03-17, by heinrichsweikamp
- Colours for scrubber display when time remaining falls below a threshold value
2023-03-15, by heinrichsweikamp
Dev Bugfix: ignore analog out of bounds limits for DiveO2 sensor:
2023-03-07, by Ideenmodellierer
Added visualization of CO2 during dive:
2023-03-07, by Ideenmodellierer
Cleanup display of multiple warnings in T3 (Big font) view:
2023-03-07, by Ideenmodellierer
Only show autodetection in sensor menu if external interface is present:
2023-03-07, by Ideenmodellierer
Updated outdated comment
2023-03-07, by Ideenmodellierer

less more | rev 812: (0) -300 -100 -60 +60 +100 tip