Mercurial > public > ostc4

view Documentations/dump-disc.cfg @ 877:a0900e4df15c Evo_2_23 tip

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
DevBugfix: Exit condition deco_stop_depth deco_stop_depth is defined as float but handled like an integer. During code cleanup this was not considered for the break condition of the VPM calculation loop causing an endless loop condition. The legacy format has been restored in the updated version.
author Ideenmodellierer
date Tue, 20 Aug 2024 15:18:43 +0200
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f427IIT6
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

puts "Flash banks:"
flash banks

#puts "Reading FIRMWARE..."
# Requires OpenOCD 0.10.0 / released January 2017 ?
#flash dump_image CPU1-DISC-dump.hex 0x00000000 0x8000

#puts "Done."
exit