Mercurial > public > ostc4

view Discovery/Inc/ostc_hw2.h @ 861:ad96f99ebc78 Evo_2_23 tip

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Synchronize ADC and UART activities: depending on the cable configuration the UART sensor operation may have an impact to the ADC measurement (peaks). To avoid this the ADC measurements are now only started in case no UART communication is pending.
author Ideenmodellierer
date Tue, 07 May 2024 21:25:25 +0200
parents 5f11787b4f42
children
line wrap: on
line source

///////////////////////////////////////////////////////////////////////////////
/// -*- coding: UTF-8 -*-
///
/// \file   Discovery/Inc/ostc_hw2.h
/// \brief
/// \author Heinrichs Weikamp
/// \date   2018
///
/// $Id$
///////////////////////////////////////////////////////////////////////////////
/// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh
///
///     This program is free software: you can redistribute it and/or modify
///     it under the terms of the GNU General Public License as published by
///     the Free Software Foundation, either version 3 of the License, or
///     (at your option) any later version.
///
///     This program is distributed in the hope that it will be useful,
///     but WITHOUT ANY WARRANTY; without even the implied warranty of
///     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
///     GNU General Public License for more details.
///
///     You should have received a copy of the GNU General Public License
///     along with this program.  If not, see <http://www.gnu.org/licenses/>.
//////////////////////////////////////////////////////////////////////////////

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef OSTC_HW2_H
#define OSTC_HW2_H

#include "stm32f429xx.h"

/*
#define DISPLAY_BACKLIGHT_PIN                       GPIO_PIN_7
#define DISPLAY_BACKLIGHT_GPIO_PORT					GPIOC
#define DISPLAY_BACKLIGHT_GPIO_ENABLE()             __GPIOC_CLK_ENABLE()
*/
#define SMALL_BOARD_PCB9_AND_LATER
#define TESTPIN

#define DISPLAY_RESETB_PIN                          GPIO_PIN_13
#define DISPLAY_RESETB_GPIO_PORT                    GPIOC
#define DISPLAY_RESETB_GPIO_ENABLE()                __GPIOC_CLK_ENABLE()

#define DISPLAY_CSB_PIN								GPIO_PIN_8
#define DISPLAY_CSB_GPIO_PORT                       GPIOI
#define DISPLAY_CSB_GPIO_ENABLE()                   __GPIOI_CLK_ENABLE()

#define VSYNC_IRQ_PIN                               GPIO_PIN_3
#define VSYNC_IRQ_GPIO_PORT                         GPIOE
#define VSYNC_IRQ_GPIO_ENABLE()                     __GPIOE_CLK_ENABLE()
#define VSYNC_IRQ_EXTI_IRQn                         EXTI3_IRQn

#ifdef SMALL_BOARD_PCB9_AND_LATER
#define BUTTON_BACK_PIN								GPIO_PIN_0
#define BUTTON_BACK_EXTI_IRQn                       EXTI0_IRQn
#define BUTTON_BACK_GPIO_PORT                       GPIOB
#define BUTTON_BACK_GPIO_ENABLE()                   __GPIOB_CLK_ENABLE()

#define BUTTON_ENTER_PIN							GPIO_PIN_1
#define BUTTON_ENTER_EXTI_IRQn                      EXTI1_IRQn
#define BUTTON_ENTER_GPIO_PORT                      GPIOA
#define BUTTON_ENTER_GPIO_ENABLE()                  __GPIOA_CLK_ENABLE()

#define BUTTON_NEXT_PIN								GPIO_PIN_2
#define BUTTON_NEXT_EXTI_IRQn                       EXTI2_IRQn
#define BUTTON_NEXT_GPIO_PORT                       GPIOA
#define BUTTON_NEXT_GPIO_ENABLE()                   __GPIOA_CLK_ENABLE()
#else
#define BUTTON_BACK_PIN								GPIO_PIN_0
#define BUTTON_BACK_EXTI_IRQn                       EXTI0_IRQn
#define BUTTON_BACK_GPIO_PORT                       GPIOB
#define BUTTON_BACK_GPIO_ENABLE()                   __GPIOB_CLK_ENABLE()

#define BUTTON_ENTER_PIN							GPIO_PIN_4
#define BUTTON_ENTER_EXTI_IRQn                      EXTI4_IRQn
#define BUTTON_ENTER_GPIO_PORT                      GPIOH
#define BUTTON_ENTER_GPIO_ENABLE()                  __GPIOH_CLK_ENABLE()

#define BUTTON_NEXT_PIN								GPIO_PIN_2
#define BUTTON_NEXT_EXTI_IRQn                       EXTI2_IRQn
#define BUTTON_NEXT_GPIO_PORT                       GPIOA
#define BUTTON_NEXT_GPIO_ENABLE()                   __GPIOA_CLK_ENABLE()

#define BUTTON_CUSTOM_PIN							GPIO_PIN_1
#define BUTTON_CUSTOM_EXTI_IRQn                     EXTI1_IRQn
#define BUTTON_CUSTOM_GPIO_PORT                     GPIOA
#define BUTTON_CUSTOM_GPIO_ENABLE()                 __GPIOA_CLK_ENABLE()
#endif


#ifdef TESTPIN
#define TEST_PIN									GPIO_PIN_4
#define TEST_GPIO_PORT								GPIOH
#define TEST_GPIO_ENABLE()                          __GPIOH_CLK_ENABLE()
#endif


#define EXTFLASH_CSB_PIN							GPIO_PIN_6
#define EXTFLASH_CSB_GPIO_PORT                      GPIOF
#define EXTFLASH_CSB_GPIO_ENABLE()                  __GPIOF_CLK_ENABLE()

#define OSCILLOSCOPE_PIN							GPIO_PIN_3
#define OSCILLOSCOPE_GPIO_PORT                      GPIOA
#define OSCILLOSCOPE_GPIO_ENABLE()                  __GPIOA_CLK_ENABLE()

#define OSCILLOSCOPE2_PIN							GPIO_PIN_11
#define OSCILLOSCOPE2_GPIO_PORT                     GPIOB
#define OSCILLOSCOPE2_GPIO_ENABLE()                 __GPIOB_CLK_ENABLE()

/* Bluetooth */
#define BLE_NENABLE_PIN								GPIO_PIN_7
#define BLE_NENABLE_GPIO_PORT                       GPIOB
#define BLE_NENABLE_GPIO_ENABLE()                   __GPIOB_CLK_ENABLE()
/*
#define BLE_NENABLE_PIN								GPIO_PIN_11
#define BLE_NENABLE_GPIO_PORT                       GPIOD
#define BLE_NENABLE_GPIO_ENABLE()                   __GPIOD_CLK_ENABLE()
*/
#define USARTx                                      USART1
#define USARTx_CLK_ENABLE()                         __USART1_CLK_ENABLE();
#define USARTx_FORCE_RESET()                        __USART1_FORCE_RESET()
#define USARTx_RELEASE_RESET()                      __USART1_RELEASE_RESET()

#define USARTx_TX_AF                                GPIO_AF7_USART1
#define USARTx_TX_PIN                               GPIO_PIN_9
#define USARTx_TX_GPIO_PORT                         GPIOA
#define USARTx_TX_GPIO_CLK_ENABLE()                 __GPIOA_CLK_ENABLE()

#define USARTx_RX_AF                                GPIO_AF7_USART1
#define USARTx_RX_PIN                               GPIO_PIN_10
#define USARTx_RX_GPIO_PORT                         GPIOA
#define USARTx_RX_GPIO_CLK_ENABLE()                 __GPIOA_CLK_ENABLE()

#define USARTx_CTS_AF                               GPIO_AF7_USART1
#define USARTx_CTS_PIN                              GPIO_PIN_11
#define USARTx_CTS_GPIO_PORT                        GPIOA
#define USARTx_CTS_GPIO_CLK_ENABLE()                __GPIOA_CLK_ENABLE()

#define USARTx_RTS_AF                               GPIO_AF7_USART1
#define USARTx_RTS_PIN                              GPIO_PIN_12
#define USARTx_RTS_GPIO_PORT                        GPIOA
#define USARTx_RTS_GPIO_CLK_ENABLE()                __GPIOA_CLK_ENABLE()

#define USARTx_IRQn                                 USART1_IRQn
// to it directly#define USARTx_IRQHandler          USART1_IRQHandler

/*
#define IR_HUD_ENABLE_PIN                           GPIO_PIN_7
#define IR_HUD_ENABLE_GPIO_PORT                     GPIOD
#define IR_HUD_ENABLE_GPIO_ENABLE()                 __GPIOD_CLK_ENABLE()
*/

#define USART_IR_HUD                                USART2
#define USART_IR_HUD_CLK_ENABLE()                   __USART2_CLK_ENABLE();
#define USART_IR_HUD_FORCE_RESET()                  __USART2_FORCE_RESET()
#define USART_IR_HUD_RELEASE_RESET()                __USART2_RELEASE_RESET()
#define USART_IR_HUD_TX_AF                          GPIO_AF7_USART2
#define USART_IR_HUD_TX_PIN                         GPIO_PIN_5
#define USART_IR_HUD_TX_GPIO_PORT                   GPIOD
#define USART_IR_HUD_TX_GPIO_CLK_ENABLE()           __GPIOD_CLK_ENABLE()

#define USART_IR_HUD_RX_AF                          GPIO_AF7_USART2
#define USART_IR_HUD_RX_PIN                         GPIO_PIN_6
#define USART_IR_HUD_RX_GPIO_PORT                   GPIOD
#define USART_IR_HUD_RX_GPIO_CLK_ENABLE()           __GPIOD_CLK_ENABLE()
#define USART_IR_HUD_IRQn                           USART2_IRQn
// to it directly#define USART_IR_HUD_IRQHandler    USART2_IRQHandler

#define TIMx                                        TIM4
#define TIMx_CLK_ENABLE                             __TIM4_CLK_ENABLE
#define TIMx_IRQn                                   TIM4_IRQn
// to it directly #define TIMx_IRQHandler           TIM4_IRQHandler

#define TIM_BACKLIGHT                               TIM3
#define TIM_BACKLIGHT_CLK_ENABLE                    __TIM3_CLK_ENABLE
#define TIM_BACKLIGHT_IRQn                          TIM3_IRQn
#define TIM_BACKLIGHT_IRQHandler                    TIM3_IRQHandler
#define TIM_BACKLIGHT_CHANNEL                       TIM_CHANNEL_2
#define TIM_BACKLIGHT_PIN                           GPIO_PIN_7
#define TIM_BACKLIGHT_GPIO_PORT                     GPIOC
#define TIM_BACKLIGHT_GPIO_ENABLE()                 __GPIOC_CLK_ENABLE()

#define SMALLCPU_CSB_PIN							GPIO_PIN_5
#define SMALLCPU_CSB_GPIO_PORT                      GPIOC
#define SMALLCPU_CSB_GPIO_ENABLE()                  __GPIOC_CLK_ENABLE()

#define SMALLCPU_BOOT0_PIN                          GPIO_PIN_9
#define SMALLCPU_BOOT0_GPIO_PORT                    GPIOC
#define SMALLCPU_BOOT0_GPIO_ENABLE()                __GPIOC_CLK_ENABLE()

#define SMALLCPU_NRESET_PIN                         GPIO_PIN_8
#define SMALLCPU_NRESET_GPIO_PORT                   GPIOC
#define SMALLCPU_NRESET_GPIO_ENABLE()               __GPIOC_CLK_ENABLE()

#define RESET_LOGIC_ALLES_OK_PIN					GPIO_PIN_15
#define RESET_LOGIC_ALLES_OK_GPIO_PORT				GPIOB
#define RESET_LOGIC_ALLES_OK_GPIO_ENABLE()          __GPIOB_CLK_ENABLE()

#endif // OSTC_HW2_H