Mercurial > public > ostc4
view Common/Inc/settings.h @ 876:5b325372db4b Evo_2_23 tip
Minor: Enable CO2-Sensor as default now
also enable voltage display in addition to %-Battery
author | heinrichsweikamp |
---|---|
date | Fri, 16 Aug 2024 16:17:51 +0200 |
parents | e373e90a48db |
children |
line wrap: on
line source
/////////////////////////////////////////////////////////////////////////////// /// -*- coding: UTF-8 -*- /// /// \file Common/Inc/settings.h /// \brief /// \author Heinrichs Weikamp /// \date 2018 /// /// $Id$ /////////////////////////////////////////////////////////////////////////////// /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh /// /// This program is free software: you can redistribute it and/or modify /// it under the terms of the GNU General Public License as published by /// the Free Software Foundation, either version 3 of the License, or /// (at your option) any later version. /// /// This program is distributed in the hope that it will be useful, /// but WITHOUT ANY WARRANTY; without even the implied warranty of /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the /// GNU General Public License for more details. /// /// You should have received a copy of the GNU General Public License /// along with this program. If not, see <http://www.gnu.org/licenses/>. ////////////////////////////////////////////////////////////////////////////// #ifndef SETTINGS_H #define SETTINGS_H #include <stdint.h> #include <stdbool.h> // From Common/Inc: #include "FirmwareData.h" //#include "data_central.h" #include "global_constants.h" // From Common/Drivers/ #include "stm32f4xx_hal.h" #include "stm32f4xx_hal_rtc.h" #include "configuration.h" #define NUM_GASES 5 #define NUM_OFFSET_DILUENT 5 #define SPECIAL_GAS_ID 0 #define NO_GAS_ID 255 #define ERROR_ 0xFF #define CCRMODE_FixedSetpoint 0 #define CCRMODE_Sensors 1 #define CCRMODE_Simulation 2 #define DIVEMODE_OC 0 #define DIVEMODE_CCR 1 #define DIVEMODE_Gauge 2 #define DIVEMODE_Apnea 3 #define DIVEMODE_PSCR 4 #define GF_MODE 1 #define VPM_MODE 2 #define VPM_FROM_FORTRAN 0 #define VPM_BACHELORWORK 1 #define BUEHLMANN_OSTC4 0 #define BUEHLMANN_hwOS 1 #define MMDDYY 0 #define DDMMYY 1 #define YYMMDD 2 #define PRESSURE_OFFSET_LIMIT_MBAR 50 #define MAX_COMPASS_COMP (2u) #define MAX_VIEWPORT_MODE (0x7F) #define MAX_SCRUBBER_TIME (999u) #define MIN_SCRUBBER_TIME -99 #define MIN_PPO2_SP_CBAR (40u) #define PSCR_MAX_O2_DROP (15u) #define PSCR_MIN_LUNG_RATIO (5u) #define PSCR_MAX_LUNG_RATIO (20u) #define UART_MAX_PROTOCOL (2u) #define FUTURE_SPARE_SIZE (0u) /* Applied for reuse of old, not used, scooter block (was 32 bytes)*/ typedef enum { O2_SENSOR_SOURCE_OPTIC = 0, O2_SENSOR_SOURCE_ANALOG, O2_SENSOR_SOURCE_DIGITAL, O2_SENSOR_SOURCE_ANADIG, #ifdef ENABLE_SENTINEL_MODE O2_SENSOR_SOURCE_SENTINEL, #endif O2_SENSOR_SOURCE_MAX } SensorSource; #define MAX_O2_SENSOR_SOURCE (2u) typedef enum { SCRUB_TIMER_OFF = 0, SCRUB_TIMER_MINUTES, SCRUB_TIMER_PERCENT, SCRUB_TIMER_END } ScrubTimerMode_e; /* 2015 Jan 30, hw, deco and travel added for MenuEditGas * can be used for buehlmann, vpm, etc. later but be carefull * with current implemenation */ typedef struct{ uint8_t active:1; uint8_t first:1; uint8_t deco:1; uint8_t travel:1; uint8_t off:1; uint8_t decocalc:1; uint8_t spare:2; } gasubit8_t; typedef union{ gasubit8_t ub; uint8_t uw; } gasbit8_Type; typedef struct{ uint8_t standard:4; uint8_t alternative:4; } ubit2x4_t; typedef union{ ubit2x4_t ub; uint8_t uw; } split2x4_Type; typedef union{ uint8_t u8[4]; uint32_t u32; } general32to8_Type; typedef struct { uint8_t oxygen_percentage; uint8_t helium_percentage; gasbit8_Type note; uint8_t depth_meter; uint8_t depth_meter_travel; uint8_t bottle_size_liter; // uint8_t bottle_wireless_status; uint16_t bottle_wireless_id; } SGasLine; typedef struct { uint8_t setpoint_cbar; uint8_t depth_meter; gasbit8_Type note; } SSetpointLine; typedef struct { uint16_t TimerMax; int16_t TimerCur; RTC_DateTypeDef lastDive; } SScrubberData; enum { SETPOINT_INDEX_CUSTOM = 0, SETPOINT_INDEX_AUTO_LOW, SETPOINT_INDEX_AUTO_HIGH, SETPOINT_INDEX_AUTO_DECO, }; typedef struct { uint8_t FirstCorrection; uint8_t Corrections; } SSettingsStatus; /* SSettings * gas[0] and setpoint[0] are the special ones configurable during the dive */ typedef struct { uint32_t header; uint8_t warning_blink_dsec; uint8_t lastDiveLogId; uint32_t logFlashNextSampleStartAddress; SGasLine gas[1 + (2*NUM_GASES)]; SSetpointLine setpoint[1 + NUM_GASES]; uint8_t CCR_Mode; uint8_t dive_mode; split2x4_Type deco_type; uint8_t ppO2_max_deco; uint8_t ppO2_max_std; uint8_t ppO2_min; uint8_t CNS_max; uint8_t ascent_MeterPerMinute_max; uint8_t ascent_MeterPerMinute_showGraph; uint8_t future_TTS; uint8_t GF_high; uint8_t GF_low; uint8_t aGF_high; uint8_t aGF_low; split2x4_Type VPM_conservatism; uint8_t safetystopDuration; uint8_t AtemMinutenVolumenLiter; uint8_t ReserveFractionDenominator; uint8_t salinity; uint8_t last_stop_depth_meter; uint8_t stop_increment_depth_meter; uint8_t brightness; uint8_t date_format; uint8_t selected_language; char customtext[60]; uint16_t timeoutSurfacemode; uint8_t timeoutMenuSurface; uint8_t timeoutMenuDive; uint8_t timeoutMenuEdit; uint8_t timeoutInfo; uint8_t timeoutInfoCompass; uint8_t design; uint16_t timeoutDiveReachedZeroDepth; uint16_t divetimeToCreateLogbook; uint8_t serialHigh; uint8_t serialLow; // SUFirmware firmwareVersion16to32bit; uint32_t backup_localtime_rtc_tr; uint32_t backup_localtime_rtc_dr; uint16_t totalDiveCounter; uint16_t personalDiveCount; uint8_t showDebugInfo; uint8_t ButtonResponsiveness[4];// changed content in 0xFFFF0016 uint8_t nonMetricalSystem; uint8_t fallbackToFixedSetpoint; uint8_t bluetoothActive; /* will be set to zero on each startup at the moment */ uint8_t safetystopDepth; uint32_t updateSettingsAllowedFromHeader; uint8_t pscr_lung_ratio; /* redefined in 0xFFFF0020 */ uint8_t pscr_o2_drop; /* redefined in 0xFFFF0020 */ uint8_t co2_sensor_active; /* redefined in 0xFFFF0021 */ uint8_t ext_uart_protocol; /* redefined in 0xFFFF0022 */ uint8_t scubberActiveId; /* redefined in 0xFFFF0023 */ SScrubberData scrubberData[2]; uint8_t ext_sensor_map_Obsolete[5]; uint8_t buttonLockActive; /* redefined in 0xFFFF0025 */ int8_t compassDeclinationDeg; uint8_t delaySetpointLow; uint16_t timerDurationS; /* redefined in 0xFFFF0026 */ uint8_t Future_SPARE[FUTURE_SPARE_SIZE]; /* redefined in 0xFFFF0020 (old scooter Block was 32 byte)*/ // new in 0xFFFF0006 uint8_t ppo2sensors_deactivated; uint8_t tX_colorscheme; uint8_t tX_userselectedLeftLowerCornerPrimary; uint8_t tX_userselectedLeftLowerCornerTimeout; uint8_t tX_customViewPrimary; uint8_t tX_customViewTimeout; uint8_t timeoutEnterButtonSelectDive; uint16_t logbookOffset; uint8_t alwaysShowPPO2; uint8_t extraDisplay; uint16_t display_toogle_desc; int8_t offsetPressure_mbar; int8_t offsetTemperature_centigrad; uint8_t gasConsumption_travel_l_min; uint8_t gasConsumption_bottom_l_min; uint8_t gasConsumption_deco_l_min; uint8_t debugModeOnStart; uint8_t IAmStolenPleaseKillMe; int16_t compassBearing; uint8_t lastKnownBatteryPercentage; uint8_t buttonBalance[3]; // 0 = right, 1 = center, 2 = left uint8_t firmwareVersion[4]; uint16_t timeoutSurfacemodeWithSensors; // new in 0xFFFF0016 uint8_t VPM_model; uint8_t GF_model; // new in 0xFFFF0017 uint8_t FactoryButtonBase; uint8_t FactoryButtonBalance[3]; /* new in 0xFFFF0018 */ uint8_t FlipDisplay; /* new in 0xFFFF0019 */ uint32_t cv_configuration; /* new in 0xFFFF001A */ uint8_t MotionDetection; /* new in 0xFFFF001B */ uint32_t cv_config_BigScreen; /* new in 0xFFFF001C */ uint8_t compassInertia; uint8_t tX_customViewPrimaryBF; /* new in 0xFFFF001D */ uint8_t viewPortMode; /* 7-Reserve| 6..5 - Focus spot size | 4-Focusframe | 3-Reserve | 2..0-BacklightBoost */ uint16_t viewRoll; uint16_t viewPitch; uint16_t viewYaw; /* new in 0xFFFF001E */ uint8_t ppo2sensors_source; float ppo2sensors_calibCoeff[3]; uint8_t amPMTime; /* new in 0xFFFF001F */ uint8_t autoSetpoint; uint16_t scrubTimerMax_Obsolete; /* have been replaced with new scrubber data format */ uint16_t scrubTimerCur_Obsolete; /* have been replaced with new scrubber data format */ uint8_t scrubTimerMode; uint8_t ext_sensor_map[8]; /* redefined in 0xFFFF0027 */ uint8_t cvAutofocus; } SSettings; typedef struct { // 8 bytes uint16_t primarySerial; uint8_t primaryLicence; uint8_t revision8bit; uint8_t production_year; uint8_t production_month; uint8_t production_day; uint8_t production_bluetooth_name_set; // 44 bytes char production_info[44]; // 8 bytes uint16_t secondarySerial; uint8_t secondaryLicence; uint8_t secondaryReason8bit; uint8_t secondary_year; uint8_t secondary_month; uint8_t secondary_day; uint8_t secondary_bluetooth_name_set; // 4 bytes char secondary_info[4]; } SHardwareData; uint8_t writeData(uint8_t *); uint8_t readData(uint8_t what,uint8_t *); uint8_t readDataLimits__8and16BitValues_4and7BytesOutput(uint8_t what, uint8_t * data); uint8_t getPPO2Max(void); uint8_t getPPO2Min(void); uint8_t getDiveMode(void); uint8_t getCCRMode(void); uint8_t getDecoType(void); uint8_t getFutureTTS(void); SSettings* settingsGetPointer(void); const SSettings* settingsGetPointerStandard(void); void set_settings_to_Standard(void); void mod_settings_for_first_start_with_empty_ext_flash(void); const SFirmwareData* firmwareDataGetPointer(void); const SHardwareData* hardwareDataGetPointer(void); uint8_t firmwareVersion_16bit_high(void); uint8_t firmwareVersion_16bit_low(void); void hardwareBatchCode(uint8_t *high, uint8_t *low); uint8_t RTEminimum_required_high(void); uint8_t RTEminimum_required_low(void); uint8_t FONTminimum_required_high(void); uint8_t FONTminimum_required_low(void); void setActualRTEversion(uint8_t high, uint8_t low); void getActualRTEandFONTversion(uint8_t *RTEhigh, uint8_t *RTElow, uint8_t *FONThigh, uint8_t *FONTlow); void set_new_settings_missing_in_ext_flash(void); uint8_t check_and_correct_settings(void); uint8_t newFirmwareVersionCheckViaSettings(void); void set_settings_button_to_factory_with_individual_buttonBalance(void); uint8_t getLicence(void); void firmwareGetDate(RTC_DateTypeDef *SdateOutput); void settingsHelperButtonSens_original_translate_to_hwOS_values(const uint32_t inputValueRaw, uint8_t *outArray4Values); uint8_t buttonBalanceTranslatorHexToArray(uint8_t hexValue, uint8_t* outputArray); uint8_t buttonBalanceTranslateArrayOutHex(const uint8_t* inputArray); void getButtonFactorDefaults(uint8_t* basePercentage, uint8_t* buttonBalanceArray); void settingsWriteFactoryDefaults(uint8_t inputValueRaw, uint8_t *inputBalanceArray); void settingsHelperButtonSens_keepPercentageValues(uint32_t inputValueRaw, uint8_t *outArray4Values); uint8_t settingsHelperButtonSens_translate_percentage_to_hwOS_values(uint8_t inputValuePercentage); uint8_t settingsHelperButtonSens_translate_hwOS_values_to_percentage(uint8_t inputValuePIC); void get_CorrectionStatus(SSettingsStatus* Status); void reset_SettingWarning(); uint8_t isSettingsWarning(); bool checkAndFixSetpointSettings(void); #endif // SETTINGS_H