Mercurial > public > ostc4
annotate Common/Inc/settings.h @ 861:ad96f99ebc78 Evo_2_23 tip
Synchronize ADC and UART activities:
depending on the cable configuration the UART sensor operation may have an impact to the ADC measurement (peaks). To avoid this the ADC measurements are now only started in case no UART communication is pending.
| author | Ideenmodellierer |
|---|---|
| date | Tue, 07 May 2024 21:25:25 +0200 |
| parents | 2a8af51ab04d |
| children |
| rev | line source |
|---|---|
| 38 | 1 /////////////////////////////////////////////////////////////////////////////// |
| 2 /// -*- coding: UTF-8 -*- | |
| 3 /// | |
| 4 /// \file Common/Inc/settings.h | |
| 5 /// \brief | |
| 6 /// \author Heinrichs Weikamp | |
| 7 /// \date 2018 | |
| 8 /// | |
| 9 /// $Id$ | |
| 10 /////////////////////////////////////////////////////////////////////////////// | |
| 11 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh | |
| 12 /// | |
| 13 /// This program is free software: you can redistribute it and/or modify | |
| 14 /// it under the terms of the GNU General Public License as published by | |
| 15 /// the Free Software Foundation, either version 3 of the License, or | |
| 16 /// (at your option) any later version. | |
| 17 /// | |
| 18 /// This program is distributed in the hope that it will be useful, | |
| 19 /// but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 20 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 21 /// GNU General Public License for more details. | |
| 22 /// | |
| 23 /// You should have received a copy of the GNU General Public License | |
| 24 /// along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 25 ////////////////////////////////////////////////////////////////////////////// | |
| 26 | |
| 27 #ifndef SETTINGS_H | |
| 28 #define SETTINGS_H | |
| 29 | |
|
788
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
30 #include <stdint.h> |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
31 #include <stdbool.h> |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
32 |
| 38 | 33 // From Common/Inc: |
| 34 #include "FirmwareData.h" | |
| 35 | |
| 36 //#include "data_central.h" | |
| 37 | |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
38
diff
changeset
|
38 #include "global_constants.h" |
| 38 | 39 // From Common/Drivers/ |
| 40 #include "stm32f4xx_hal.h" | |
| 710 | 41 #include "stm32f4xx_hal_rtc.h" |
| 38 | 42 |
| 691 | 43 #include "configuration.h" |
| 44 | |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
38
diff
changeset
|
45 |
| 38 | 46 #define NUM_GASES 5 |
| 47 #define NUM_OFFSET_DILUENT 5 | |
| 48 #define SPECIAL_GAS_ID 0 | |
| 49 | |
| 50 #define ERROR_ 0xFF | |
| 51 | |
| 52 #define CCRMODE_FixedSetpoint 0 | |
| 53 #define CCRMODE_Sensors 1 | |
| 662 | 54 #define CCRMODE_Simulation 2 |
| 38 | 55 |
| 56 #define DIVEMODE_OC 0 | |
| 57 #define DIVEMODE_CCR 1 | |
| 58 #define DIVEMODE_Gauge 2 | |
| 59 #define DIVEMODE_Apnea 3 | |
| 662 | 60 #define DIVEMODE_PSCR 4 |
| 38 | 61 |
| 62 #define GF_MODE 1 | |
| 63 #define VPM_MODE 2 | |
| 64 | |
| 65 #define VPM_FROM_FORTRAN 0 | |
| 66 #define VPM_BACHELORWORK 1 | |
| 67 | |
| 68 #define BUEHLMANN_OSTC4 0 | |
| 69 #define BUEHLMANN_hwOS 1 | |
| 70 | |
| 71 #define MMDDYY 0 | |
| 72 #define DDMMYY 1 | |
| 73 #define YYMMDD 2 | |
| 74 | |
|
337
38367bb982b8
Set Max value for pressure offset to 50mBar (20mBar before)
ideenmodellierer
parents:
210
diff
changeset
|
75 #define PRESSURE_OFFSET_LIMIT_MBAR 50 |
|
38367bb982b8
Set Max value for pressure offset to 50mBar (20mBar before)
ideenmodellierer
parents:
210
diff
changeset
|
76 |
|
560
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
77 #define MAX_COMPASS_COMP (2u) |
| 640 | 78 #define MAX_VIEWPORT_MODE (0x7F) |
|
560
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
79 |
| 676 | 80 #define MAX_SCRUBBER_TIME (999u) |
|
758
b6d8a6fbf4fd
- Colours for scrubber display when time remaining falls below a threshold value
heinrichsweikamp
parents:
741
diff
changeset
|
81 #define MIN_SCRUBBER_TIME -99 |
| 652 | 82 #define MIN_PPO2_SP_CBAR (40u) |
| 650 | 83 |
| 662 | 84 #define PSCR_MAX_O2_DROP (15u) |
| 85 #define PSCR_MIN_LUNG_RATIO (5u) | |
| 86 #define PSCR_MAX_LUNG_RATIO (20u) | |
| 87 | |
| 691 | 88 #define UART_MAX_PROTOCOL (2u) |
| 89 | |
|
805
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
796
diff
changeset
|
90 #define FUTURE_SPARE_SIZE (0u) /* Applied for reuse of old, not used, scooter block (was 32 bytes)*/ |
| 662 | 91 |
|
560
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
92 typedef enum |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
93 { |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
94 O2_SENSOR_SOURCE_OPTIC = 0, |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
95 O2_SENSOR_SOURCE_ANALOG, |
|
702
6d7c812fc173
Added digital o2 sensor to settings and data exchange:
Ideenmodellierer
parents:
691
diff
changeset
|
96 O2_SENSOR_SOURCE_DIGITAL, |
|
6d7c812fc173
Added digital o2 sensor to settings and data exchange:
Ideenmodellierer
parents:
691
diff
changeset
|
97 O2_SENSOR_SOURCE_ANADIG, |
| 691 | 98 #ifdef ENABLE_SENTINEL_MODE |
| 99 O2_SENSOR_SOURCE_SENTINEL, | |
| 100 #endif | |
|
560
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
101 O2_SENSOR_SOURCE_MAX |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
102 } SensorSource; |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
103 #define MAX_O2_SENSOR_SOURCE (2u) |
| 546 | 104 |
|
654
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
105 typedef enum |
|
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
106 { |
|
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
107 SCRUB_TIMER_OFF = 0, |
|
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
108 SCRUB_TIMER_MINUTES, |
|
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
109 SCRUB_TIMER_PERCENT, |
|
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
110 SCRUB_TIMER_END |
|
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
111 } ScrubTimerMode_e; |
|
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
112 |
| 38 | 113 /* 2015 Jan 30, hw, deco and travel added for MenuEditGas |
| 114 * can be used for buehlmann, vpm, etc. later but be carefull | |
| 115 * with current implemenation */ | |
| 116 typedef struct{ | |
| 117 uint8_t active:1; | |
| 118 uint8_t first:1; | |
| 119 uint8_t deco:1; | |
| 120 uint8_t travel:1; | |
|
526
88c626d01ee5
Added new option to gas configuration: "Off":
Ideenmodellierer
parents:
505
diff
changeset
|
121 uint8_t off:1; |
|
830
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
819
diff
changeset
|
122 uint8_t decocalc:1; |
|
b7d93ff6b3b2
Added selection if an active gas shall be used for deco calculation or not:
Ideenmodellierer
parents:
819
diff
changeset
|
123 uint8_t spare:2; |
| 38 | 124 } gasubit8_t; |
| 125 | |
| 126 typedef union{ | |
| 127 gasubit8_t ub; | |
| 128 uint8_t uw; | |
| 129 } gasbit8_Type; | |
| 130 | |
| 131 typedef struct{ | |
| 132 uint8_t standard:4; | |
| 133 uint8_t alternative:4; | |
| 134 } ubit2x4_t; | |
| 135 | |
| 136 typedef union{ | |
| 137 ubit2x4_t ub; | |
| 138 uint8_t uw; | |
| 139 } split2x4_Type; | |
| 140 | |
| 141 typedef union{ | |
| 142 uint8_t u8[4]; | |
| 143 uint32_t u32; | |
| 144 } general32to8_Type; | |
| 145 | |
| 146 typedef struct | |
| 147 { | |
| 148 uint8_t oxygen_percentage; | |
| 149 uint8_t helium_percentage; | |
| 150 gasbit8_Type note; | |
| 151 uint8_t depth_meter; | |
| 152 uint8_t depth_meter_travel; | |
| 153 uint8_t bottle_size_liter; | |
| 154 // uint8_t bottle_wireless_status; | |
| 155 uint16_t bottle_wireless_id; | |
| 156 } SGasLine; | |
| 157 | |
| 158 typedef struct | |
| 159 { | |
| 160 uint8_t setpoint_cbar; | |
| 161 uint8_t depth_meter; | |
| 162 gasbit8_Type note; | |
| 163 } SSetpointLine; | |
| 164 | |
|
654
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
165 |
| 710 | 166 typedef struct |
| 167 { | |
| 168 uint16_t TimerMax; | |
|
758
b6d8a6fbf4fd
- Colours for scrubber display when time remaining falls below a threshold value
heinrichsweikamp
parents:
741
diff
changeset
|
169 int16_t TimerCur; |
| 710 | 170 RTC_DateTypeDef lastDive; |
| 171 } SScrubberData; | |
| 172 | |
|
788
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
173 enum { |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
174 SETPOINT_INDEX_CUSTOM = 0, |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
175 SETPOINT_INDEX_AUTO_LOW, |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
176 SETPOINT_INDEX_AUTO_HIGH, |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
177 SETPOINT_INDEX_AUTO_DECO, |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
178 }; |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
179 |
|
819
24b39a432bc2
Added debug information in case an error in the settings has been detected:
Ideenmodellierer
parents:
805
diff
changeset
|
180 typedef struct |
|
24b39a432bc2
Added debug information in case an error in the settings has been detected:
Ideenmodellierer
parents:
805
diff
changeset
|
181 { |
|
24b39a432bc2
Added debug information in case an error in the settings has been detected:
Ideenmodellierer
parents:
805
diff
changeset
|
182 uint8_t FirstCorrection; |
|
24b39a432bc2
Added debug information in case an error in the settings has been detected:
Ideenmodellierer
parents:
805
diff
changeset
|
183 uint8_t Corrections; |
|
24b39a432bc2
Added debug information in case an error in the settings has been detected:
Ideenmodellierer
parents:
805
diff
changeset
|
184 } SSettingsStatus; |
|
654
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
185 |
| 38 | 186 /* SSettings |
| 187 * gas[0] and setpoint[0] are the special ones configurable during the dive | |
| 188 */ | |
| 189 typedef struct | |
| 190 { | |
| 191 uint32_t header; | |
| 192 uint8_t warning_blink_dsec; | |
| 193 uint8_t lastDiveLogId; | |
| 194 uint32_t logFlashNextSampleStartAddress; | |
| 195 SGasLine gas[1 + (2*NUM_GASES)]; | |
| 196 SSetpointLine setpoint[1 + NUM_GASES]; | |
| 197 uint8_t CCR_Mode; | |
| 198 uint8_t dive_mode; | |
| 199 split2x4_Type deco_type; | |
| 200 uint8_t ppO2_max_deco; | |
| 201 uint8_t ppO2_max_std; | |
| 202 uint8_t ppO2_min; | |
| 203 uint8_t CNS_max; | |
| 204 uint8_t ascent_MeterPerMinute_max; | |
| 205 uint8_t ascent_MeterPerMinute_showGraph; | |
| 206 uint8_t future_TTS; | |
| 207 uint8_t GF_high; | |
| 208 uint8_t GF_low; | |
| 209 uint8_t aGF_high; | |
| 210 uint8_t aGF_low; | |
| 211 split2x4_Type VPM_conservatism; | |
| 212 uint8_t safetystopDuration; | |
| 213 uint8_t AtemMinutenVolumenLiter; | |
| 214 uint8_t ReserveFractionDenominator; | |
| 215 uint8_t salinity; | |
| 216 uint8_t last_stop_depth_meter; | |
| 217 uint8_t stop_increment_depth_meter; | |
| 218 uint8_t brightness; | |
| 219 uint8_t date_format; | |
| 220 uint8_t selected_language; | |
| 221 char customtext[60]; | |
| 222 uint16_t timeoutSurfacemode; | |
| 223 uint8_t timeoutMenuSurface; | |
| 224 uint8_t timeoutMenuDive; | |
| 225 uint8_t timeoutMenuEdit; | |
| 226 uint8_t timeoutInfo; | |
| 227 uint8_t timeoutInfoCompass; | |
| 228 uint8_t design; | |
| 229 uint16_t timeoutDiveReachedZeroDepth; | |
| 230 uint16_t divetimeToCreateLogbook; | |
| 231 uint8_t serialHigh; | |
| 232 uint8_t serialLow; | |
| 233 // SUFirmware firmwareVersion16to32bit; | |
| 234 uint32_t backup_localtime_rtc_tr; | |
| 235 uint32_t backup_localtime_rtc_dr; | |
| 236 uint16_t totalDiveCounter; | |
|
560
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
237 uint16_t personalDiveCount; |
| 38 | 238 uint8_t showDebugInfo; |
| 239 uint8_t ButtonResponsiveness[4];// changed content in 0xFFFF0016 | |
| 240 uint8_t nonMetricalSystem; | |
| 241 uint8_t fallbackToFixedSetpoint; | |
| 242 uint8_t bluetoothActive; /* will be set to zero on each startup at the moment */ | |
| 243 uint8_t safetystopDepth; | |
| 244 uint32_t updateSettingsAllowedFromHeader; | |
| 662 | 245 uint8_t pscr_lung_ratio; /* redefined in 0xFFFF0020 */ |
| 246 uint8_t pscr_o2_drop; /* redefined in 0xFFFF0020 */ | |
| 247 uint8_t co2_sensor_active; /* redefined in 0xFFFF0021 */ | |
| 691 | 248 uint8_t ext_uart_protocol; /* redefined in 0xFFFF0022 */ |
| 710 | 249 |
| 250 uint8_t scubberActiveId; /* redefined in 0xFFFF0023 */ | |
| 251 SScrubberData scrubberData[2]; | |
| 796 | 252 uint8_t ext_sensor_map_Obsolete[5]; |
| 253 uint8_t buttonLockActive; /* redefined in 0xFFFF0025 */ | |
|
788
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
254 int8_t compassDeclinationDeg; |
|
805
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
796
diff
changeset
|
255 uint8_t delaySetpointLow; |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
796
diff
changeset
|
256 uint16_t timerDurationS; /* redefined in 0xFFFF0026 */ |
| 662 | 257 uint8_t Future_SPARE[FUTURE_SPARE_SIZE]; /* redefined in 0xFFFF0020 (old scooter Block was 32 byte)*/ |
| 38 | 258 // new in 0xFFFF0006 |
| 259 uint8_t ppo2sensors_deactivated; | |
| 260 uint8_t tX_colorscheme; | |
| 261 uint8_t tX_userselectedLeftLowerCornerPrimary; | |
| 262 uint8_t tX_userselectedLeftLowerCornerTimeout; | |
| 263 uint8_t tX_customViewPrimary; | |
| 264 uint8_t tX_customViewTimeout; | |
| 265 uint8_t timeoutEnterButtonSelectDive; | |
| 266 uint16_t logbookOffset; | |
| 267 uint8_t alwaysShowPPO2; | |
| 268 uint8_t extraDisplay; | |
| 269 uint16_t display_toogle_desc; | |
| 270 int8_t offsetPressure_mbar; | |
| 271 int8_t offsetTemperature_centigrad; | |
| 272 uint8_t gasConsumption_travel_l_min; | |
| 273 uint8_t gasConsumption_bottom_l_min; | |
| 274 uint8_t gasConsumption_deco_l_min; | |
| 275 uint8_t debugModeOnStart; | |
| 276 uint8_t IAmStolenPleaseKillMe; | |
| 277 int16_t compassBearing; | |
| 278 uint8_t lastKnownBatteryPercentage; | |
| 279 uint8_t buttonBalance[3]; // 0 = right, 1 = center, 2 = left | |
| 280 uint8_t firmwareVersion[4]; | |
| 281 uint16_t timeoutSurfacemodeWithSensors; | |
| 282 // new in 0xFFFF0016 | |
| 283 uint8_t VPM_model; | |
| 284 uint8_t GF_model; | |
| 285 // new in 0xFFFF0017 | |
| 286 uint8_t FactoryButtonBase; | |
| 287 uint8_t FactoryButtonBalance[3]; | |
|
112
fdf0272e9213
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
38
diff
changeset
|
288 /* new in 0xFFFF0018 */ |
|
fdf0272e9213
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
38
diff
changeset
|
289 uint8_t FlipDisplay; |
|
210
b2a9e9b02df0
New feature: make selected customviews persistent
Jan Mulder <jlmulder@xs4all.nl>
parents:
138
diff
changeset
|
290 /* new in 0xFFFF0019 */ |
|
b2a9e9b02df0
New feature: make selected customviews persistent
Jan Mulder <jlmulder@xs4all.nl>
parents:
138
diff
changeset
|
291 uint32_t cv_configuration; |
|
368
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
210
diff
changeset
|
292 /* new in 0xFFFF001A */ |
|
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
210
diff
changeset
|
293 uint8_t MotionDetection; |
|
498
4811f3dfaa52
Added dew parameter to enable selection of customer BigFont screens to be displayed
Ideenmodellierer
parents:
372
diff
changeset
|
294 /* new in 0xFFFF001B */ |
|
4811f3dfaa52
Added dew parameter to enable selection of customer BigFont screens to be displayed
Ideenmodellierer
parents:
372
diff
changeset
|
295 uint32_t cv_config_BigScreen; |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
526
diff
changeset
|
296 /* new in 0xFFFF001C */ |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
526
diff
changeset
|
297 uint8_t compassInertia; |
|
542
6960df7ddb09
Added new t3 view showing first deco stop and tts in parallel:
Ideenmodellierer
parents:
539
diff
changeset
|
298 uint8_t tX_customViewPrimaryBF; |
| 546 | 299 /* new in 0xFFFF001D */ |
|
626
3e1a0e267f38
Added option to select sensitivity of focus detection:
Ideenmodellierer
parents:
567
diff
changeset
|
300 uint8_t viewPortMode; /* 7-Reserve| 6..5 - Focus spot size | 4-Focusframe | 3-Reserve | 2..0-BacklightBoost */ |
| 546 | 301 uint16_t viewRoll; |
| 302 uint16_t viewPitch; | |
| 303 uint16_t viewYaw; | |
|
560
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
304 /* new in 0xFFFF001E */ |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
305 uint8_t ppo2sensors_source; |
|
5d80bb8d22cb
Added O2 sensor source and calibration parameters to setting structure
Ideenmodellierer
parents:
550
diff
changeset
|
306 float ppo2sensors_calibCoeff[3]; |
| 567 | 307 uint8_t amPMTime; |
| 650 | 308 /* new in 0xFFFF001F */ |
| 309 uint8_t autoSetpoint; | |
| 710 | 310 uint16_t scrubTimerMax_Obsolete; /* have been replaced with new scrubber data format */ |
| 311 uint16_t scrubTimerCur_Obsolete; /* have been replaced with new scrubber data format */ | |
|
654
890440ab993a
Introduced new menu tab for addition CCR options:
Ideenmodellierer
parents:
652
diff
changeset
|
312 uint8_t scrubTimerMode; |
| 796 | 313 uint8_t ext_sensor_map[8]; /* redefined in 0xFFFF0027 */ |
|
834
2a8af51ab04d
Added event based display changes for big font view:
Ideenmodellierer
parents:
830
diff
changeset
|
314 uint8_t cvAutofocus; |
| 38 | 315 } SSettings; |
| 316 | |
| 317 typedef struct | |
| 318 { | |
| 319 // 8 bytes | |
| 320 uint16_t primarySerial; | |
| 321 uint8_t primaryLicence; | |
| 322 uint8_t revision8bit; | |
| 323 uint8_t production_year; | |
| 324 uint8_t production_month; | |
| 325 uint8_t production_day; | |
| 326 uint8_t production_bluetooth_name_set; | |
| 327 | |
| 328 // 44 bytes | |
| 329 char production_info[44]; | |
| 330 | |
| 331 // 8 bytes | |
| 332 uint16_t secondarySerial; | |
| 333 uint8_t secondaryLicence; | |
| 334 uint8_t secondaryReason8bit; | |
| 335 uint8_t secondary_year; | |
| 336 uint8_t secondary_month; | |
| 337 uint8_t secondary_day; | |
| 338 uint8_t secondary_bluetooth_name_set; | |
| 339 | |
| 340 // 4 bytes | |
| 341 char secondary_info[4]; | |
| 342 } SHardwareData; | |
| 343 | |
| 344 uint8_t writeData(uint8_t *); | |
| 345 uint8_t readData(uint8_t what,uint8_t *); | |
| 346 uint8_t readDataLimits__8and16BitValues_4and7BytesOutput(uint8_t what, uint8_t * data); | |
| 347 | |
| 348 uint8_t getPPO2Max(void); | |
| 349 uint8_t getPPO2Min(void); | |
| 350 uint8_t getDiveMode(void); | |
| 351 uint8_t getCCRMode(void); | |
| 352 uint8_t getDecoType(void); | |
| 353 uint8_t getFutureTTS(void); | |
| 354 | |
| 355 SSettings* settingsGetPointer(void); | |
| 356 const SSettings* settingsGetPointerStandard(void); | |
| 357 void set_settings_to_Standard(void); | |
| 358 void mod_settings_for_first_start_with_empty_ext_flash(void); | |
| 359 const SFirmwareData* firmwareDataGetPointer(void); | |
| 360 const SHardwareData* hardwareDataGetPointer(void); | |
| 361 uint8_t firmwareVersion_16bit_high(void); | |
| 362 uint8_t firmwareVersion_16bit_low(void); | |
| 363 void hardwareBatchCode(uint8_t *high, uint8_t *low); | |
| 364 | |
| 365 uint8_t RTEminimum_required_high(void); | |
| 366 uint8_t RTEminimum_required_low(void); | |
| 367 uint8_t FONTminimum_required_high(void); | |
| 368 uint8_t FONTminimum_required_low(void); | |
| 369 | |
| 370 void setActualRTEversion(uint8_t high, uint8_t low); | |
| 371 void getActualRTEandFONTversion(uint8_t *RTEhigh, uint8_t *RTElow, uint8_t *FONThigh, uint8_t *FONTlow); | |
| 372 | |
| 373 void set_new_settings_missing_in_ext_flash(void); | |
| 374 uint8_t check_and_correct_settings(void); | |
| 375 uint8_t newFirmwareVersionCheckViaSettings(void); | |
|
765
da8126d5ea9f
After a firmware update, use the factory settings for button sensitivity if these exist, the default settings otherwise.
heinrichsweikamp
parents:
758
diff
changeset
|
376 void set_settings_button_to_factory_with_individual_buttonBalance(void); |
| 38 | 377 uint8_t getLicence(void); |
| 378 void firmwareGetDate(RTC_DateTypeDef *SdateOutput); | |
| 379 | |
| 380 void settingsHelperButtonSens_original_translate_to_hwOS_values(const uint32_t inputValueRaw, uint8_t *outArray4Values); | |
| 381 | |
| 382 uint8_t buttonBalanceTranslatorHexToArray(uint8_t hexValue, uint8_t* outputArray); | |
| 383 uint8_t buttonBalanceTranslateArrayOutHex(const uint8_t* inputArray); | |
| 384 void getButtonFactorDefaults(uint8_t* basePercentage, uint8_t* buttonBalanceArray); | |
| 385 void settingsWriteFactoryDefaults(uint8_t inputValueRaw, uint8_t *inputBalanceArray); | |
| 386 | |
| 387 void settingsHelperButtonSens_keepPercentageValues(uint32_t inputValueRaw, uint8_t *outArray4Values); | |
| 388 uint8_t settingsHelperButtonSens_translate_percentage_to_hwOS_values(uint8_t inputValuePercentage); | |
| 389 uint8_t settingsHelperButtonSens_translate_hwOS_values_to_percentage(uint8_t inputValuePIC); | |
| 390 | |
|
819
24b39a432bc2
Added debug information in case an error in the settings has been detected:
Ideenmodellierer
parents:
805
diff
changeset
|
391 void get_CorrectionStatus(SSettingsStatus* Status); |
| 662 | 392 void reset_SettingWarning(); |
| 393 uint8_t isSettingsWarning(); | |
| 394 | |
|
788
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
776
diff
changeset
|
395 bool checkAndFixSetpointSettings(void); |
| 38 | 396 #endif // SETTINGS_H |