view Discovery/Inc/simulation.h @ 396:effa6fb9eb89 ImproveBluetooth

Added function for BlueMod configuration: Investigations of connection problems showed that there is a problem if the module is not able to forward data fast enough. The bottleneck in direction of microcontroller may be solved by increasing baud rate. To be backward (bootloader) compatible this is done temperoraly during every startup Added function for signal stregth evaluation: Quality of data connection may have an impact on stability => added function to visualize current state of connection. The evaluation may be requested remote using 'l' (0x6c) or by pressing next button while in service mode Cleanup Disconnection procedure: Disconnection issued by OSTC was realized by simply switching of the module which might have a negativ impact to remote devices. Second reason for change was that, e.g. in case of a timeout on OSTC side. a remote device might have continued sending firmware data causing OSTC to interpretate firmware image as service requests. E.g. resulting in a corrupted configuration. Instead of just switching off power a disconnection request is now send to the BlueMod. Decreased size used for large data receiption: Depending on device speed firmware transfer might be really slow. By decreasing the block size a short (6 seconds) timeout per block may be kept while the sender has more time for transfering the image
author ideenmodellierer
date Tue, 26 Nov 2019 22:12:25 +0100
parents 2bb1db22b5f5
children 55a9aa740f13
line wrap: on
line source

///////////////////////////////////////////////////////////////////////////////
/// -*- coding: UTF-8 -*-
///
/// \file   Discovery/Inc/simulation.h
/// \brief
/// \author Heinrichs Weikamp
/// \date   2018
///
/// $Id$
///////////////////////////////////////////////////////////////////////////////
/// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh
///
///     This program is free software: you can redistribute it and/or modify
///     it under the terms of the GNU General Public License as published by
///     the Free Software Foundation, either version 3 of the License, or
///     (at your option) any later version.
///
///     This program is distributed in the hope that it will be useful,
///     but WITHOUT ANY WARRANTY; without even the implied warranty of
///     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
///     GNU General Public License for more details.
///
///     You should have received a copy of the GNU General Public License
///     along with this program.  If not, see <http://www.gnu.org/licenses/>.
//////////////////////////////////////////////////////////////////////////////

#ifndef SIMULATION_H
#define SIMULATION_H

#include "stm32f4xx_hal.h"
#include "data_central.h"

typedef struct
{
    uint8_t depthMeterFirstStop;
    uint8_t descentRateMeterPerMinute;
    uint8_t ascentRateMeterPerMinute;
    uint16_t timeToBottom;
    uint16_t timeAtBottom;
    uint16_t timeToFirstStop;
    uint16_t timeToSurface;
    float	ppO2AtBottom;
} SSimDataSummary;

void simulation_start(int aim_depth);
void simulation_exit(void);

void simulation_set_heed_decostops(_Bool heed_decostops_while_ascending);

void simulation_UpdateLifeData( _Bool checkOncePerSecond);
void simulation_set_zero_time_descent(void);

uint16_t simulation_get_aim_depth(void);
_Bool simulation_get_heed_decostops(void);
SDecoinfo* simulation_decoplaner(uint16_t depth_meter, uint16_t intervall_time_minutes, uint16_t dive_time_minutes, uint8_t *gasChangeListDepthGas20x2);
SDecoinfo* simulation_decoplaner_Bachelorarbeit_VPM(uint16_t depth_meter, uint16_t intervall_time_minutes, uint16_t dive_time_minutes, uint8_t *gasChangeListDepthGas20x2);
void simulation_gas_consumption(uint16_t *outputConsumptionList, uint16_t depth_meter, uint16_t dive_time_minutes, SDecoinfo *decoInfoInput, uint8_t gasConsumTravelInput, uint8_t gasConsumDecoInput, const uint8_t *gasChangeListDepthGas20x2);
void simulation_helper_change_points(SSimDataSummary *outputSummary, uint16_t depth_meter, uint16_t dive_time_minutes, SDecoinfo *decoInfoInput, const uint8_t *gasChangeListDepthGas20x2);


void Sim_Descend (void);
void Sim_Ascend (void);
void Sim_Divetime (void);
void Sim_Quit (void);


#endif /* SIMULATION_H */