Mercurial > public > ostc4
view Common/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_mmc.h @ 342:ea3fda8eb93e FlightMode_Improvment
Removed averaging of pressure and temperatur values
On RTE side data was copied once a second while the average function is called several time a second => no real averaging. In generell a datta value should be processed only once (in RTE) and then only be consumption. Otherwise a risk of inconsistent computations could be raised
| author | ideenmodellierer |
|---|---|
| date | Tue, 01 Oct 2019 19:13:41 +0200 |
| parents | c78bcbd5deda |
| children |
line wrap: on
line source
/** ****************************************************************************** * @file stm32f4xx_hal_mmc.h * @author MCD Application Team * @brief Header file of MMC HAL module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_MMC_H #define __STM32F4xx_HAL_MMC_H #ifdef __cplusplus extern "C" { #endif #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \ defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \ defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_ll_sdmmc.h" /** @addtogroup STM32F4xx_HAL_Driver * @{ */ /** @defgroup MMC MMC * @brief MMC HAL module driver * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup MMC_Exported_Types MMC Exported Types * @{ */ /** @defgroup MMC_Exported_Types_Group1 MMC State enumeration structure * @{ */ typedef enum { HAL_MMC_STATE_RESET = 0x00000000U, /*!< MMC not yet initialized or disabled */ HAL_MMC_STATE_READY = 0x00000001U, /*!< MMC initialized and ready for use */ HAL_MMC_STATE_TIMEOUT = 0x00000002U, /*!< MMC Timeout state */ HAL_MMC_STATE_BUSY = 0x00000003U, /*!< MMC process ongoing */ HAL_MMC_STATE_PROGRAMMING = 0x00000004U, /*!< MMC Programming State */ HAL_MMC_STATE_RECEIVING = 0x00000005U, /*!< MMC Receinving State */ HAL_MMC_STATE_TRANSFER = 0x00000006U, /*!< MMC Transfert State */ HAL_MMC_STATE_ERROR = 0x0000000FU /*!< MMC is in error state */ }HAL_MMC_StateTypeDef; /** * @} */ /** @defgroup MMC_Exported_Types_Group2 MMC Card State enumeration structure * @{ */ typedef enum { HAL_MMC_CARD_READY = 0x00000001U, /*!< Card state is ready */ HAL_MMC_CARD_IDENTIFICATION = 0x00000002U, /*!< Card is in identification state */ HAL_MMC_CARD_STANDBY = 0x00000003U, /*!< Card is in standby state */ HAL_MMC_CARD_TRANSFER = 0x00000004U, /*!< Card is in transfer state */ HAL_MMC_CARD_SENDING = 0x00000005U, /*!< Card is sending an operation */ HAL_MMC_CARD_RECEIVING = 0x00000006U, /*!< Card is receiving operation information */ HAL_MMC_CARD_PROGRAMMING = 0x00000007U, /*!< Card is in programming state */ HAL_MMC_CARD_DISCONNECTED = 0x00000008U, /*!< Card is disconnected */ HAL_MMC_CARD_ERROR = 0x000000FFU /*!< Card response Error */ }HAL_MMC_CardStateTypeDef; /** * @} */ /** @defgroup MMC_Exported_Types_Group3 MMC Handle Structure definition * @{ */ #define MMC_InitTypeDef SDIO_InitTypeDef #define MMC_TypeDef SDIO_TypeDef /** * @brief MMC Card Information Structure definition */ typedef struct { uint32_t CardType; /*!< Specifies the card Type */ uint32_t Class; /*!< Specifies the class of the card class */ uint32_t RelCardAdd; /*!< Specifies the Relative Card Address */ uint32_t BlockNbr; /*!< Specifies the Card Capacity in blocks */ uint32_t BlockSize; /*!< Specifies one block size in bytes */ uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */ uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */ }HAL_MMC_CardInfoTypeDef; /** * @brief MMC handle Structure definition */ typedef struct { MMC_TypeDef *Instance; /*!< MMC registers base address */ MMC_InitTypeDef Init; /*!< MMC required parameters */ HAL_LockTypeDef Lock; /*!< MMC locking object */ uint32_t *pTxBuffPtr; /*!< Pointer to MMC Tx transfer Buffer */ uint32_t TxXferSize; /*!< MMC Tx Transfer size */ uint32_t *pRxBuffPtr; /*!< Pointer to MMC Rx transfer Buffer */ uint32_t RxXferSize; /*!< MMC Rx Transfer size */ __IO uint32_t Context; /*!< MMC transfer context */ __IO HAL_MMC_StateTypeDef State; /*!< MMC card State */ __IO uint32_t ErrorCode; /*!< MMC Card Error codes */ DMA_HandleTypeDef *hdmarx; /*!< MMC Rx DMA handle parameters */ DMA_HandleTypeDef *hdmatx; /*!< MMC Tx DMA handle parameters */ HAL_MMC_CardInfoTypeDef MmcCard; /*!< MMC Card information */ uint32_t CSD[4U]; /*!< MMC card specific data table */ uint32_t CID[4U]; /*!< MMC card identification number table */ }MMC_HandleTypeDef; /** * @} */ /** @defgroup MMC_Exported_Types_Group4 Card Specific Data: CSD Register * @{ */ typedef struct { __IO uint8_t CSDStruct; /*!< CSD structure */ __IO uint8_t SysSpecVersion; /*!< System specification version */ __IO uint8_t Reserved1; /*!< Reserved */ __IO uint8_t TAAC; /*!< Data read access time 1 */ __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */ __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */ __IO uint16_t CardComdClasses; /*!< Card command classes */ __IO uint8_t RdBlockLen; /*!< Max. read data block length */ __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */ __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */ __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */ __IO uint8_t DSRImpl; /*!< DSR implemented */ __IO uint8_t Reserved2; /*!< Reserved */ __IO uint32_t DeviceSize; /*!< Device Size */ __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */ __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */ __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */ __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */ __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */ __IO uint8_t EraseGrSize; /*!< Erase group size */ __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */ __IO uint8_t WrProtectGrSize; /*!< Write protect group size */ __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */ __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */ __IO uint8_t WrSpeedFact; /*!< Write speed factor */ __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */ __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */ __IO uint8_t Reserved3; /*!< Reserved */ __IO uint8_t ContentProtectAppli; /*!< Content protection application */ __IO uint8_t FileFormatGrouop; /*!< File format group */ __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */ __IO uint8_t PermWrProtect; /*!< Permanent write protection */ __IO uint8_t TempWrProtect; /*!< Temporary write protection */ __IO uint8_t FileFormat; /*!< File format */ __IO uint8_t ECC; /*!< ECC code */ __IO uint8_t CSD_CRC; /*!< CSD CRC */ __IO uint8_t Reserved4; /*!< Always 1 */ }HAL_MMC_CardCSDTypeDef; /** * @} */ /** @defgroup MMC_Exported_Types_Group5 Card Identification Data: CID Register * @{ */ typedef struct { __IO uint8_t ManufacturerID; /*!< Manufacturer ID */ __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */ __IO uint32_t ProdName1; /*!< Product Name part1 */ __IO uint8_t ProdName2; /*!< Product Name part2 */ __IO uint8_t ProdRev; /*!< Product Revision */ __IO uint32_t ProdSN; /*!< Product Serial Number */ __IO uint8_t Reserved1; /*!< Reserved1 */ __IO uint16_t ManufactDate; /*!< Manufacturing Date */ __IO uint8_t CID_CRC; /*!< CID CRC */ __IO uint8_t Reserved2; /*!< Always 1 */ }HAL_MMC_CardCIDTypeDef; /** * @} */ /** @defgroup MMC_Exported_Types_Group6 MMC Card Status returned by ACMD13 * @{ */ typedef struct { __IO uint8_t DataBusWidth; /*!< Shows the currently defined data bus width */ __IO uint8_t SecuredMode; /*!< Card is in secured mode of operation */ __IO uint16_t CardType; /*!< Carries information about card type */ __IO uint32_t ProtectedAreaSize; /*!< Carries information about the capacity of protected area */ __IO uint8_t SpeedClass; /*!< Carries information about the speed class of the card */ __IO uint8_t PerformanceMove; /*!< Carries information about the card's performance move */ __IO uint8_t AllocationUnitSize; /*!< Carries information about the card's allocation unit size */ __IO uint16_t EraseSize; /*!< Determines the number of AUs to be erased in one operation */ __IO uint8_t EraseTimeout; /*!< Determines the timeout for any number of AU erase */ __IO uint8_t EraseOffset; /*!< Carries information about the erase offset */ }HAL_MMC_CardStatusTypeDef; /** * @} */ /** * @} */ /* Exported constants --------------------------------------------------------*/ /** @defgroup MMC_Exported_Constants Exported Constants * @{ */ #define BLOCKSIZE 512U /*!< Block size is 512 bytes */ #define CAPACITY 0x400000U /*!< Log Block Nuumber for 2 G bytes Cards */ /** @defgroup MMC_Exported_Constansts_Group1 MMC Error status enumeration Structure definition * @{ */ #define HAL_MMC_ERROR_NONE SDMMC_ERROR_NONE /*!< No error */ #define HAL_MMC_ERROR_CMD_CRC_FAIL SDMMC_ERROR_CMD_CRC_FAIL /*!< Command response received (but CRC check failed) */ #define HAL_MMC_ERROR_DATA_CRC_FAIL SDMMC_ERROR_DATA_CRC_FAIL /*!< Data block sent/received (CRC check failed) */ #define HAL_MMC_ERROR_CMD_RSP_TIMEOUT SDMMC_ERROR_CMD_RSP_TIMEOUT /*!< Command response timeout */ #define HAL_MMC_ERROR_DATA_TIMEOUT SDMMC_ERROR_DATA_TIMEOUT /*!< Data timeout */ #define HAL_MMC_ERROR_TX_UNDERRUN SDMMC_ERROR_TX_UNDERRUN /*!< Transmit FIFO underrun */ #define HAL_MMC_ERROR_RX_OVERRUN SDMMC_ERROR_RX_OVERRUN /*!< Receive FIFO overrun */ #define HAL_MMC_ERROR_ADDR_MISALIGNED SDMMC_ERROR_ADDR_MISALIGNED /*!< Misaligned address */ #define HAL_MMC_ERROR_BLOCK_LEN_ERR SDMMC_ERROR_BLOCK_LEN_ERR /*!< Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */ #define HAL_MMC_ERROR_ERASE_SEQ_ERR SDMMC_ERROR_ERASE_SEQ_ERR /*!< An error in the sequence of erase command occurs */ #define HAL_MMC_ERROR_BAD_ERASE_PARAM SDMMC_ERROR_BAD_ERASE_PARAM /*!< An invalid selection for erase groups */ #define HAL_MMC_ERROR_WRITE_PROT_VIOLATION SDMMC_ERROR_WRITE_PROT_VIOLATION /*!< Attempt to program a write protect block */ #define HAL_MMC_ERROR_LOCK_UNLOCK_FAILED SDMMC_ERROR_LOCK_UNLOCK_FAILED /*!< Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */ #define HAL_MMC_ERROR_COM_CRC_FAILED SDMMC_ERROR_COM_CRC_FAILED /*!< CRC check of the previous command failed */ #define HAL_MMC_ERROR_ILLEGAL_CMD SDMMC_ERROR_ILLEGAL_CMD /*!< Command is not legal for the card state */ #define HAL_MMC_ERROR_CARD_ECC_FAILED SDMMC_ERROR_CARD_ECC_FAILED /*!< Card internal ECC was applied but failed to correct the data */ #define HAL_MMC_ERROR_CC_ERR SDMMC_ERROR_CC_ERR /*!< Internal card controller error */ #define HAL_MMC_ERROR_GENERAL_UNKNOWN_ERR SDMMC_ERROR_GENERAL_UNKNOWN_ERR /*!< General or unknown error */ #define HAL_MMC_ERROR_STREAM_READ_UNDERRUN SDMMC_ERROR_STREAM_READ_UNDERRUN /*!< The card could not sustain data reading in stream rmode */ #define HAL_MMC_ERROR_STREAM_WRITE_OVERRUN SDMMC_ERROR_STREAM_WRITE_OVERRUN /*!< The card could not sustain data programming in stream mode */ #define HAL_MMC_ERROR_CID_CSD_OVERWRITE SDMMC_ERROR_CID_CSD_OVERWRITE /*!< CID/CSD overwrite error */ #define HAL_MMC_ERROR_WP_ERASE_SKIP SDMMC_ERROR_WP_ERASE_SKIP /*!< Only partial address space was erased */ #define HAL_MMC_ERROR_CARD_ECC_DISABLED SDMMC_ERROR_CARD_ECC_DISABLED /*!< Command has been executed without using internal ECC */ #define HAL_MMC_ERROR_ERASE_RESET SDMMC_ERROR_ERASE_RESET /*!< Erase sequence was cleared before executing because an out of erase sequence command was received */ #define HAL_MMC_ERROR_AKE_SEQ_ERR SDMMC_ERROR_AKE_SEQ_ERR /*!< Error in sequence of authentication */ #define HAL_MMC_ERROR_INVALID_VOLTRANGE SDMMC_ERROR_INVALID_VOLTRANGE /*!< Error in case of invalid voltage range */ #define HAL_MMC_ERROR_ADDR_OUT_OF_RANGE SDMMC_ERROR_ADDR_OUT_OF_RANGE /*!< Error when addressed block is out of range */ #define HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE SDMMC_ERROR_REQUEST_NOT_APPLICABLE /*!< Error when command request is not applicable */ #define HAL_MMC_ERROR_PARAM SDMMC_ERROR_INVALID_PARAMETER /*!< the used parameter is not valid */ #define HAL_MMC_ERROR_UNSUPPORTED_FEATURE SDMMC_ERROR_UNSUPPORTED_FEATURE /*!< Error when feature is not insupported */ #define HAL_MMC_ERROR_BUSY SDMMC_ERROR_BUSY /*!< Error when transfer process is busy */ #define HAL_MMC_ERROR_DMA SDMMC_ERROR_DMA /*!< Error while DMA transfer */ #define HAL_MMC_ERROR_TIMEOUT SDMMC_ERROR_TIMEOUT /*!< Timeout error */ /** * @} */ /** @defgroup MMC_Exported_Constansts_Group2 MMC context enumeration structure * @{ */ #define MMC_CONTEXT_NONE 0x00000000U /*!< None */ #define MMC_CONTEXT_READ_SINGLE_BLOCK 0x00000001U /*!< Read single block operation */ #define MMC_CONTEXT_READ_MULTIPLE_BLOCK 0x00000002U /*!< Read multiple blocks operation */ #define MMC_CONTEXT_WRITE_SINGLE_BLOCK 0x00000010U /*!< Write single block operation */ #define MMC_CONTEXT_WRITE_MULTIPLE_BLOCK 0x00000020U /*!< Write multiple blocks operation */ #define MMC_CONTEXT_IT 0x00000008U /*!< Process in Interrupt mode */ #define MMC_CONTEXT_DMA 0x00000080U /*!< Process in DMA mode */ /** * @} */ /** @defgroup MMC_Exported_Constansts_Group3 MMC Voltage mode * @{ */ /** * @brief */ #define MMC_HIGH_VOLTAGE_RANGE 0x80FF8000U /*!< VALUE OF ARGUMENT */ #define MMC_DUAL_VOLTAGE_RANGE 0x80FF8080U /*!< VALUE OF ARGUMENT */ #define eMMC_HIGH_VOLTAGE_RANGE 0xC0FF8000U /*!< for eMMC > 2Gb sector mode */ #define eMMC_DUAL_VOLTAGE_RANGE 0xC0FF8080U /*!< for eMMC > 2Gb sector mode */ #define MMC_INVALID_VOLTAGE_RANGE 0x0001FF01U /** * @} */ /** @defgroup MMC_Exported_Constansts_Group4 MMC Memory Cards * @{ */ #define MMC_HIGH_VOLTAGE_CARD 0x00000000U #define MMC_DUAL_VOLTAGE_CARD 0x00000001U /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /** @defgroup MMC_Exported_macros MMC Exported Macros * @brief macros to handle interrupts and specific clock configurations * @{ */ /** * @brief Enable the MMC device. * @retval None */ #define __HAL_MMC_ENABLE(__HANDLE__) __SDIO_ENABLE((__HANDLE__)->Instance) /** * @brief Disable the MMC device. * @retval None */ #define __HAL_MMC_DISABLE(__HANDLE__) __SDIO_DISABLE((__HANDLE__)->Instance) /** * @brief Enable the SDMMC DMA transfer. * @retval None */ #define __HAL_MMC_DMA_ENABLE(__HANDLE__) __SDIO_DMA_ENABLE((__HANDLE__)->Instance) /** * @brief Disable the SDMMC DMA transfer. * @retval None */ #define __HAL_MMC_DMA_DISABLE(__HANDLE__) __SDIO_DMA_DISABLE((__HANDLE__)->Instance) /** * @brief Enable the MMC device interrupt. * @param __HANDLE__ MMC Handle * @param __INTERRUPT__ specifies the SDMMC interrupt sources to be enabled. * This parameter can be one or a combination of the following values: * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt * @arg SDIO_IT_TXACT: Data transmit in progress interrupt * @arg SDIO_IT_RXACT: Data receive in progress interrupt * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt * @retval None */ #define __HAL_MMC_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) /** * @brief Disable the MMC device interrupt. * @param __HANDLE__ MMC Handle * @param __INTERRUPT__ specifies the SDMMC interrupt sources to be disabled. * This parameter can be one or a combination of the following values: * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt * @arg SDIO_IT_TXACT: Data transmit in progress interrupt * @arg SDIO_IT_RXACT: Data receive in progress interrupt * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt * @retval None */ #define __HAL_MMC_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) /** * @brief Check whether the specified MMC flag is set or not. * @param __HANDLE__ MMC Handle * @param __FLAG__ specifies the flag to check. * This parameter can be one of the following values: * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) * @arg SDIO_FLAG_CTIMEOUT: Command response timeout * @arg SDIO_FLAG_DTIMEOUT: Data timeout * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) * @arg SDIO_FLAG_CMDACT: Command transfer in progress * @arg SDIO_FLAG_TXACT: Data transmit in progress * @arg SDIO_FLAG_RXACT: Data receive in progress * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received * @retval The new state of MMC FLAG (SET or RESET). */ #define __HAL_MMC_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__)) /** * @brief Clear the MMC's pending flags. * @param __HANDLE__ MMC Handle * @param __FLAG__ specifies the flag to clear. * This parameter can be one or a combination of the following values: * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) * @arg SDIO_FLAG_CTIMEOUT: Command response timeout * @arg SDIO_FLAG_DTIMEOUT: Data timeout * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received * @retval None */ #define __HAL_MMC_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__)) /** * @brief Check whether the specified MMC interrupt has occurred or not. * @param __HANDLE__ MMC Handle * @param __INTERRUPT__ specifies the SDMMC interrupt source to check. * This parameter can be one of the following values: * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt * @arg SDIO_IT_TXACT: Data transmit in progress interrupt * @arg SDIO_IT_RXACT: Data receive in progress interrupt * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt * @retval The new state of MMC IT (SET or RESET). */ #define __HAL_MMC_GET_IT(__HANDLE__, __INTERRUPT__) __SDIO_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__)) /** * @brief Clear the MMC's interrupt pending bits. * @param __HANDLE__ MMC Handle * @param __INTERRUPT__ specifies the interrupt pending bit to clear. * This parameter can be one or a combination of the following values: * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt * @arg SDIO_IT_DATAEND: Data end (data counter, SDMMC_DCOUNT, is zero) interrupt * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt * @retval None */ #define __HAL_MMC_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__)) /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @defgroup MMC_Exported_Functions MMC Exported Functions * @{ */ /** @defgroup MMC_Exported_Functions_Group1 Initialization and de-initialization functions * @{ */ HAL_StatusTypeDef HAL_MMC_Init(MMC_HandleTypeDef *hmmc); HAL_StatusTypeDef HAL_MMC_InitCard(MMC_HandleTypeDef *hmmc); HAL_StatusTypeDef HAL_MMC_DeInit (MMC_HandleTypeDef *hmmc); void HAL_MMC_MspInit(MMC_HandleTypeDef *hmmc); void HAL_MMC_MspDeInit(MMC_HandleTypeDef *hmmc); /** * @} */ /** @defgroup MMC_Exported_Functions_Group2 Input and Output operation functions * @{ */ /* Blocking mode: Polling */ HAL_StatusTypeDef HAL_MMC_ReadBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout); HAL_StatusTypeDef HAL_MMC_WriteBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout); HAL_StatusTypeDef HAL_MMC_Erase(MMC_HandleTypeDef *hmmc, uint32_t BlockStartAdd, uint32_t BlockEndAdd); /* Non-Blocking mode: IT */ HAL_StatusTypeDef HAL_MMC_ReadBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); HAL_StatusTypeDef HAL_MMC_WriteBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); /* Non-Blocking mode: DMA */ HAL_StatusTypeDef HAL_MMC_ReadBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); HAL_StatusTypeDef HAL_MMC_WriteBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); void HAL_MMC_IRQHandler(MMC_HandleTypeDef *hmmc); /* Callback in non blocking modes (DMA) */ void HAL_MMC_TxCpltCallback(MMC_HandleTypeDef *hmmc); void HAL_MMC_RxCpltCallback(MMC_HandleTypeDef *hmmc); void HAL_MMC_ErrorCallback(MMC_HandleTypeDef *hmmc); void HAL_MMC_AbortCallback(MMC_HandleTypeDef *hmmc); /** * @} */ /** @defgroup MMC_Exported_Functions_Group3 Peripheral Control functions * @{ */ HAL_StatusTypeDef HAL_MMC_ConfigWideBusOperation(MMC_HandleTypeDef *hmmc, uint32_t WideMode); /** * @} */ /** @defgroup MMC_Exported_Functions_Group4 MMC card related functions * @{ */ HAL_MMC_CardStateTypeDef HAL_MMC_GetCardState(MMC_HandleTypeDef *hmmc); HAL_StatusTypeDef HAL_MMC_GetCardCID(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCIDTypeDef *pCID); HAL_StatusTypeDef HAL_MMC_GetCardCSD(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCSDTypeDef *pCSD); HAL_StatusTypeDef HAL_MMC_GetCardInfo(MMC_HandleTypeDef *hmmc, HAL_MMC_CardInfoTypeDef *pCardInfo); /** * @} */ /** @defgroup MMC_Exported_Functions_Group5 Peripheral State and Errors functions * @{ */ HAL_MMC_StateTypeDef HAL_MMC_GetState(MMC_HandleTypeDef *hmmc); uint32_t HAL_MMC_GetError(MMC_HandleTypeDef *hmmc); /** * @} */ /** @defgroup MMC_Exported_Functions_Group6 Perioheral Abort management * @{ */ HAL_StatusTypeDef HAL_MMC_Abort(MMC_HandleTypeDef *hmmc); HAL_StatusTypeDef HAL_MMC_Abort_IT(MMC_HandleTypeDef *hmmc); /** * @} */ /* Private types -------------------------------------------------------------*/ /** @defgroup MMC_Private_Types MMC Private Types * @{ */ /** * @} */ /* Private defines -----------------------------------------------------------*/ /** @defgroup MMC_Private_Defines MMC Private Defines * @{ */ /** * @} */ /* Private variables ---------------------------------------------------------*/ /** @defgroup MMC_Private_Variables MMC Private Variables * @{ */ /** * @} */ /* Private constants ---------------------------------------------------------*/ /** @defgroup MMC_Private_Constants MMC Private Constants * @{ */ /** * @} */ /* Private macros ------------------------------------------------------------*/ /** @defgroup MMC_Private_Macros MMC Private Macros * @{ */ /** * @} */ /* Private functions prototypes ----------------------------------------------*/ /** @defgroup MMC_Private_Functions_Prototypes MMC Private Functions Prototypes * @{ */ /** * @} */ /* Private functions ---------------------------------------------------------*/ /** @defgroup MMC_Private_Functions MMC Private Functions * @{ */ /** * @} */ /** * @} */ /** * @} */ /** * @} */ #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */ #ifdef __cplusplus } #endif #endif /* __STM32F4xx_HAL_MMC_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/