Mercurial > public > ostc4
view wiki/Detailed CPU1-Upper Project.md @ 810:e6827fcd7604
Only jump to Sensor view during charging if sensors are connected:
In the past it could happen that the charger view was replaced by the sensor view which was not displaying values because no sensors were connected => no added value in performing the switch. In the new version the automatic jump to the sensor view will only be performed if sennsors are connected.
author | Ideenmodellierer |
---|---|
date | Sun, 27 Aug 2023 20:55:57 +0200 |
parents | 5f11787b4f42 |
children |
line wrap: on
line source
# How to Create From Scratch a Project for _CPU1-Upper_ Code # The main CPU (aka. _CPU1 Discovery_) firmware is splitted in two parts: - The proper _CPU1 Discovery_ firmware, with the main code. - The _protected upper memory_ firmware, which is programmed during _OSTC4_ production, and contains (amongst other things) code used to upload and install firmware upgrades. ## Make a specific project ## Follow the same procedure than for [CPU1-Discovery](Detailed CPU1-Discovery Project.md), (same processor, same includes) but include the `CPU1-Upper` source directory. ** NOT FINISHED YET... BE PATIENT **