annotate wiki/Detailed CPU1-Upper Project.md @ 810:e6827fcd7604
Only jump to Sensor view during charging if sensors are connected:
In the past it could happen that the charger view was replaced by the sensor view which was not displaying values because no sensors were connected => no added value in performing the switch. In the new version the automatic jump to the sensor view will only be performed if sennsors are connected.
| author |
Ideenmodellierer |
| date |
Sun, 27 Aug 2023 20:55:57 +0200 |
| parents |
5f11787b4f42 |
| children |
|
| rev |
line source |
|
38
|
1 # How to Create From Scratch a Project for _CPU1-Upper_ Code #
|
|
|
2
|
|
|
3 The main CPU (aka. _CPU1 Discovery_) firmware is splitted in two parts:
|
|
|
4 - The proper _CPU1 Discovery_ firmware, with the main code.
|
|
|
5 - The _protected upper memory_ firmware, which is programmed during _OSTC4_ production, and contains (amongst other things) code used to upload and install firmware upgrades.
|
|
|
6
|
|
|
7 ## Make a specific project ##
|
|
|
8
|
|
|
9 Follow the same procedure than for [CPU1-Discovery](Detailed CPU1-Discovery Project.md), (same processor, same includes) but include the `CPU1-Upper` source directory.
|
|
|
10
|
|
|
11 **
|
|
|
12 NOT FINISHED YET... BE PATIENT
|
|
|
13 **
|
