view Documentations/dump-rte.cfg @ 502:cf06c12c06d1

Bugfix display of disabled screen. It is possible to select a screen as default which is in parallel disabled in the selection view. To avoid this the enable / disable state is not also checked when entering dive mode. The check function was depending on an ACTION. The functionality has been changed to allow the function call without ACTION.
author Ideenmodellierer
date Mon, 24 Aug 2020 19:43:13 +0200
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f411RETx
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

#puts "Flash banks:"
#flash banks

#puts "Reading..."
#flash dump_image CPU2-RTE-dump.hex 0x00000000 0x8000

#puts "Done."
#exit