view Documentations/dump-rte.cfg @ 758:b6d8a6fbf4fd

- Colours for scrubber display when time remaining falls below a threshold value - Display negative values when time is up and diving continues; - count down remaining scrubber time only when the dive computer is not set to bailout - after all, there is not much point in counting down time if the diver is not breathing through the scrubber.
author heinrichsweikamp
date Wed, 15 Mar 2023 09:18:07 +0100
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f411RETx
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

#puts "Flash banks:"
#flash banks

#puts "Reading..."
#flash dump_image CPU2-RTE-dump.hex 0x00000000 0x8000

#puts "Done."
#exit