Mercurial > public > ostc4

view Documentations/dump-rte.cfg @ 265:a91d99265884 IPC_Sync_Improvment_2

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Increase SPI com timeout for cold start and wake up There are use cases which cause the startup at Main to be longer than 300ms. In that case error reaction on RTE side would take place even if not needed. On the other hand having an longer timeout delays timeout detection and therefor the time till connection is reestablished => Added function to separate startup from common operation use case
author ideenmodellierer
date Sun, 14 Apr 2019 14:22:41 +0200
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f411RETx
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

#puts "Flash banks:"
#flash banks

#puts "Reading..."
#flash dump_image CPU2-RTE-dump.hex 0x00000000 0x8000

#puts "Done."
#exit