view Documentations/dump-rte.cfg @ 331:b4c578caaafb I2C_Improvment

Added plausibility check for pressure values In case of I2C communication problems at startup the dc jumped into dive mode with depth up to 300m. As no CRC is applied a bit flip may also occure during normal operation without detection => added a plausibility check if last measured value fits to the last measurements
author ideenmodellierer
date Wed, 17 Jul 2019 22:43:51 +0200
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f411RETx
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

#puts "Flash banks:"
#flash banks

#puts "Reading..."
#flash dump_image CPU2-RTE-dump.hex 0x00000000 0x8000

#puts "Done."
#exit