view Documentations/dump-rte.cfg @ 400:7bcbbaa42cbf ImproveBluetooth

Added retry through power off/on cycle: During tests sometime (<10%) the initialization of the module failed which was visible due to a deactivated Bluetooth option. Manual activation was always successfull. To improve the startup behavior a retry by using a module power off / on cycle has been added
author ideenmodellierer
date Sat, 28 Dec 2019 19:42:04 +0100
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f411RETx
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

#puts "Flash banks:"
#flash banks

#puts "Reading..."
#flash dump_image CPU2-RTE-dump.hex 0x00000000 0x8000

#puts "Done."
#exit