Bugfix Fontpack update for large blocks: The update of a font pack with a size > 768000 byte was interrupted and a manuel switch to bootloader had to be performed to get the font pack flashed. Rootcause was a missing address adjustment during the block read back function which caused a false error detection. Blocks > 768000 are read in two step while only one buffer is used for comparation. To fill the correct data into this buffer a dummy read of the flash data was added to get the data pointers to the correct offset. Another bug was regardings the read back itself where only the first byte was checked. After array indexing the complete buffer is noch verified.

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f411RETx
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

#puts "Flash banks:"
#flash banks

#puts "Reading..."
#flash dump_image CPU2-RTE-dump.hex 0x00000000 0x8000

#puts "Done."
#exit