view Documentations/dump-rte.cfg @ 739:4a6bffaa38b3

Enable start dive in Big font display: The diver had to manually switch to the big font view in dive mode. By selecting the big font view as default view in the custom menu the BF view will now be shown from the start of the dive. In order to have a qucker access to the settings menu, the settings menu has been added to the quick menu selection. The settings menu will then also be left to the BF view.
author Ideenmodellierer
date Thu, 02 Feb 2023 17:26:54 +0100
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f411RETx
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

#puts "Flash banks:"
#flash banks

#puts "Reading..."
#flash dump_image CPU2-RTE-dump.hex 0x00000000 0x8000

#puts "Done."
#exit