view Documentations/dump-rte.cfg @ 270:2e58a4094770 write-from-sim

feature, debug: make simulator write a logbook entry When compiling the code with -DSIM_WRITES_LOGBOOK, the simulator writes to the logbook. This is for debug purpose only. This commit does *not* define this SIM_WRITES_LOGBOOK, so when compiled, things are functionally unchanged. Caveat 1: a simulator generated log cannot be advanced with +5 min. It needs to run in real time. Caveat 2: The generated log is currently not "complete". For example, CCR setpoint switches are not logged. There are likely more small events not logged. This means that a sim generated log is not a full replacement for real dive testing. Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
author Jan Mulder <jlmulder@xs4all.nl>
date Wed, 24 Apr 2019 17:10:51 +0200
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f411RETx
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

#puts "Flash banks:"
#flash banks

#puts "Reading..."
#flash dump_image CPU2-RTE-dump.hex 0x00000000 0x8000

#puts "Done."
#exit