view Documentations/dump-rte.cfg @ 465:2c2df051e554 Improve_Logtansfer

Compare profile length from header and sample data to identify valid profiles In previous version sample data was used without checking if it had meanwhile been overwritten. The workarounds introduced in the last versions have now been replaced by a comparison of the profile length stored in header / sample ring. In case of an inconsistency a dummy profile is provided
author ideenmodellierer
date Tue, 14 Apr 2020 19:22:56 +0200
parents 01cc5959f199
children
line wrap: on
line source

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f411RETx
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

#puts "Flash banks:"
#flash banks

#puts "Reading..."
#flash dump_image CPU2-RTE-dump.hex 0x00000000 0x8000

#puts "Done."
#exit