New profile feature: In the past the OSTC provide just one instance for settings. If for example a diver switched from OC to CCR configuration several settings had to be modified. To improve this and to be more flexible in adapting the OSTC to differend dive scenarions the usage of up to 4 profiles has beem introduced. The profiles are copies of the common settings but stored in a separate, previously not used, flash section => no impact to existings settings handling. For access to the profiles the existing setting flash functions are reused. To enable this a parameter war introduced which defines the target of the operation (common settings or profiles).

#! openocd -f
# Define the prob used:
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select hla_swd

# Reset options
set ENABLE_LOW_POWER 1
set STOP_WATCHDOG 1
reset_config srst_only srst_nogate connect_assert_srst

# Seelct the right chip
set CHIPNAME stm32f411RETx
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]

# Allow to continue execution after a connection:
init_reset run

#puts "Flash banks:"
#flash banks

#puts "Reading..."
#flash dump_image CPU2-RTE-dump.hex 0x00000000 0x8000

#puts "Done."
#exit