--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Common/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dfsdm.c	Sun Feb 17 21:12:22 2019 +0100
@@ -0,0 +1,3839 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_dfsdm.c
+  * @author  MCD Application Team
+  * @brief   This file provides firmware functions to manage the following 
+  *          functionalities of the Digital Filter for Sigma-Delta Modulators
+  *          (DFSDM) peripherals:
+  *           + Initialization and configuration of channels and filters
+  *           + Regular channels configuration
+  *           + Injected channels configuration
+  *           + Regular/Injected Channels DMA Configuration
+  *           + Interrupts and flags management
+  *           + Analog watchdog feature
+  *           + Short-circuit detector feature
+  *           + Extremes detector feature
+  *           + Clock absence detector feature
+  *           + Break generation on analog watchdog or short-circuit event
+  *         
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..]
+    *** Channel initialization ***
+    ==============================
+    [..]
+      (#) User has first to initialize channels (before filters initialization).
+      (#) As prerequisite, fill in the HAL_DFSDM_ChannelMspInit() :
+        (++) Enable DFSDMz clock interface with __HAL_RCC_DFSDMz_CLK_ENABLE().
+        (++) Enable the clocks for the DFSDMz GPIOS with __HAL_RCC_GPIOx_CLK_ENABLE().
+        (++) Configure these DFSDMz pins in alternate mode using HAL_GPIO_Init().
+        (++) If interrupt mode is used, enable and configure DFSDMz_FLT0 global
+            interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ().
+      (#) Configure the output clock, input, serial interface, analog watchdog,
+          offset and data right bit shift parameters for this channel using the 
+          HAL_DFSDM_ChannelInit() function.
+
+    *** Channel clock absence detector ***
+    ======================================
+    [..]
+      (#) Start clock absence detector using HAL_DFSDM_ChannelCkabStart() or
+          HAL_DFSDM_ChannelCkabStart_IT().
+      (#) In polling mode, use HAL_DFSDM_ChannelPollForCkab() to detect the clock
+          absence.
+      (#) In interrupt mode, HAL_DFSDM_ChannelCkabCallback() will be called if
+          clock absence is detected.
+      (#) Stop clock absence detector using HAL_DFSDM_ChannelCkabStop() or
+          HAL_DFSDM_ChannelCkabStop_IT().
+      (#) Please note that the same mode (polling or interrupt) has to be used 
+          for all channels because the channels are sharing the same interrupt.
+      (#) Please note also that in interrupt mode, if clock absence detector is
+          stopped for one channel, interrupt will be disabled for all channels.
+
+    *** Channel short circuit detector ***
+    ======================================
+    [..]    
+      (#) Start short circuit detector using HAL_DFSDM_ChannelScdStart() or
+          or HAL_DFSDM_ChannelScdStart_IT().
+      (#) In polling mode, use HAL_DFSDM_ChannelPollForScd() to detect short
+          circuit.
+      (#) In interrupt mode, HAL_DFSDM_ChannelScdCallback() will be called if 
+          short circuit is detected.
+      (#) Stop short circuit detector using HAL_DFSDM_ChannelScdStop() or
+          or HAL_DFSDM_ChannelScdStop_IT().
+      (#) Please note that the same mode (polling or interrupt) has to be used 
+          for all channels because the channels are sharing the same interrupt.
+      (#) Please note also that in interrupt mode, if short circuit detector is
+          stopped for one channel, interrupt will be disabled for all channels.
+
+    *** Channel analog watchdog value ***
+    =====================================
+    [..]    
+      (#) Get analog watchdog filter value of a channel using
+          HAL_DFSDM_ChannelGetAwdValue().
+
+    *** Channel offset value ***
+    =====================================
+    [..]    
+      (#) Modify offset value of a channel using HAL_DFSDM_ChannelModifyOffset().
+
+    *** Filter initialization ***
+    =============================
+    [..]
+      (#) After channel initialization, user has to init filters.
+      (#) As prerequisite, fill in the HAL_DFSDM_FilterMspInit() :
+        (++) If interrupt mode is used , enable and configure DFSDMz_FLTx global
+            interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ().
+            Please note that DFSDMz_FLT0 global interrupt could be already
+            enabled if interrupt is used for channel.
+        (++) If DMA mode is used, configure DMA with HAL_DMA_Init() and link it
+            with DFSDMz filter handle using __HAL_LINKDMA().
+      (#) Configure the regular conversion, injected conversion and filter
+          parameters for this filter using the HAL_DFSDM_FilterInit() function.
+
+    *** Filter regular channel conversion ***
+    =========================================
+    [..]    
+      (#) Select regular channel and enable/disable continuous mode using
+          HAL_DFSDM_FilterConfigRegChannel().
+      (#) Start regular conversion using HAL_DFSDM_FilterRegularStart(),
+          HAL_DFSDM_FilterRegularStart_IT(), HAL_DFSDM_FilterRegularStart_DMA() or
+          HAL_DFSDM_FilterRegularMsbStart_DMA().
+      (#) In polling mode, use HAL_DFSDM_FilterPollForRegConversion() to detect 
+          the end of regular conversion.
+      (#) In interrupt mode, HAL_DFSDM_FilterRegConvCpltCallback() will be called
+          at the end of regular conversion.
+      (#) Get value of regular conversion and corresponding channel using 
+          HAL_DFSDM_FilterGetRegularValue().
+      (#) In DMA mode, HAL_DFSDM_FilterRegConvHalfCpltCallback() and 
+          HAL_DFSDM_FilterRegConvCpltCallback() will be called respectively at the
+          half transfer and at the transfer complete. Please note that 
+          HAL_DFSDM_FilterRegConvHalfCpltCallback() will be called only in DMA
+          circular mode.
+      (#) Stop regular conversion using HAL_DFSDM_FilterRegularStop(),
+          HAL_DFSDM_FilterRegularStop_IT() or HAL_DFSDM_FilterRegularStop_DMA().
+
+    *** Filter injected channels conversion ***
+    ===========================================
+    [..]
+      (#) Select injected channels using HAL_DFSDM_FilterConfigInjChannel().
+      (#) Start injected conversion using HAL_DFSDM_FilterInjectedStart(),
+          HAL_DFSDM_FilterInjectedStart_IT(), HAL_DFSDM_FilterInjectedStart_DMA() or
+          HAL_DFSDM_FilterInjectedMsbStart_DMA().
+      (#) In polling mode, use HAL_DFSDM_FilterPollForInjConversion() to detect 
+          the end of injected conversion.
+      (#) In interrupt mode, HAL_DFSDM_FilterInjConvCpltCallback() will be called
+          at the end of injected conversion.
+      (#) Get value of injected conversion and corresponding channel using 
+          HAL_DFSDM_FilterGetInjectedValue().
+      (#) In DMA mode, HAL_DFSDM_FilterInjConvHalfCpltCallback() and 
+          HAL_DFSDM_FilterInjConvCpltCallback() will be called respectively at the
+          half transfer and at the transfer complete. Please note that 
+          HAL_DFSDM_FilterInjConvCpltCallback() will be called only in DMA
+          circular mode.
+      (#) Stop injected conversion using HAL_DFSDM_FilterInjectedStop(),
+          HAL_DFSDM_FilterInjectedStop_IT() or HAL_DFSDM_FilterInjectedStop_DMA().
+
+    *** Filter analog watchdog ***
+    ==============================
+    [..]
+      (#) Start filter analog watchdog using HAL_DFSDM_FilterAwdStart_IT().
+      (#) HAL_DFSDM_FilterAwdCallback() will be called if analog watchdog occurs.
+      (#) Stop filter analog watchdog using HAL_DFSDM_FilterAwdStop_IT().
+
+    *** Filter extreme detector ***
+    ===============================
+    [..]
+      (#) Start filter extreme detector using HAL_DFSDM_FilterExdStart().
+      (#) Get extreme detector maximum value using HAL_DFSDM_FilterGetExdMaxValue().
+      (#) Get extreme detector minimum value using HAL_DFSDM_FilterGetExdMinValue().
+      (#) Start filter extreme detector using HAL_DFSDM_FilterExdStop().
+
+    *** Filter conversion time ***
+    ==============================
+    [..]
+      (#) Get conversion time value using HAL_DFSDM_FilterGetConvTimeValue().
+
+    @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+#ifdef HAL_DFSDM_MODULE_ENABLED
+#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
+/** @defgroup DFSDM DFSDM
+  * @brief DFSDM HAL driver module
+  * @{
+  */ 
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup DFSDM_Private_Define DFSDM Private Define
+ * @{
+ */
+
+#define DFSDM_FLTCR1_MSB_RCH_OFFSET     8U
+
+#define DFSDM_MSB_MASK                  0xFFFF0000U
+#define DFSDM_LSB_MASK                  0x0000FFFFU
+#define DFSDM_CKAB_TIMEOUT              5000U
+#define DFSDM1_CHANNEL_NUMBER           4U
+#if defined (DFSDM2_Channel0)
+#define DFSDM2_CHANNEL_NUMBER           8U
+#endif /* DFSDM2_Channel0 */
+
+/**
+  * @}
+  */
+/** @addtogroup DFSDM_Private_Macros 
+* @{
+*/
+
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup DFSDM_Private_Variables DFSDM Private Variables
+  * @{
+  */
+__IO uint32_t                v_dfsdm1ChannelCounter = 0U;
+DFSDM_Channel_HandleTypeDef* a_dfsdm1ChannelHandle[DFSDM1_CHANNEL_NUMBER] = {NULL};
+
+#if defined (DFSDM2_Channel0)
+__IO uint32_t                v_dfsdm2ChannelCounter = 0U;
+DFSDM_Channel_HandleTypeDef* a_dfsdm2ChannelHandle[DFSDM2_CHANNEL_NUMBER] = {NULL};
+#endif   /* DFSDM2_Channel0 */
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup DFSDM_Private_Functions DFSDM Private Functions
+  * @{
+  */
+static uint32_t DFSDM_GetInjChannelsNbr(uint32_t Channels);
+static uint32_t DFSDM_GetChannelFromInstance(DFSDM_Channel_TypeDef* Instance);
+static void     DFSDM_RegConvStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+static void     DFSDM_RegConvStop(DFSDM_Filter_HandleTypeDef* hdfsdm_filter);
+static void     DFSDM_InjConvStart(DFSDM_Filter_HandleTypeDef* hdfsdm_filter);
+static void     DFSDM_InjConvStop(DFSDM_Filter_HandleTypeDef* hdfsdm_filter);
+static void     DFSDM_DMARegularHalfConvCplt(DMA_HandleTypeDef *hdma);
+static void     DFSDM_DMARegularConvCplt(DMA_HandleTypeDef *hdma);
+static void     DFSDM_DMAInjectedHalfConvCplt(DMA_HandleTypeDef *hdma);
+static void     DFSDM_DMAInjectedConvCplt(DMA_HandleTypeDef *hdma);
+static void     DFSDM_DMAError(DMA_HandleTypeDef *hdma);
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup DFSDM_Exported_Functions DFSDM Exported Functions
+  * @{
+  */
+
+/** @defgroup DFSDM_Exported_Functions_Group1_Channel Channel initialization and de-initialization functions
+ *  @brief    Channel initialization and de-initialization functions 
+ *
+@verbatim
+  ==============================================================================
+        ##### Channel initialization and de-initialization functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize the DFSDM channel.
+      (+) De-initialize the DFSDM channel.
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initialize the DFSDM channel according to the specified parameters
+  *         in the DFSDM_ChannelInitTypeDef structure and initialize the associated handle.
+  * @param  hdfsdm_channel DFSDM channel handle.
+  * @retval HAL status.
+  */
+HAL_StatusTypeDef HAL_DFSDM_ChannelInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+#if defined(DFSDM2_Channel0)
+  __IO uint32_t*               channelCounterPtr;
+  DFSDM_Channel_HandleTypeDef  **channelHandleTable;
+  DFSDM_Channel_TypeDef*       channel0Instance;
+#endif /* defined(DFSDM2_Channel0) */
+  
+  /* Check DFSDM Channel handle */
+  if(hdfsdm_channel == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+  assert_param(IS_FUNCTIONAL_STATE(hdfsdm_channel->Init.OutputClock.Activation));
+  assert_param(IS_DFSDM_CHANNEL_INPUT(hdfsdm_channel->Init.Input.Multiplexer));
+  assert_param(IS_DFSDM_CHANNEL_DATA_PACKING(hdfsdm_channel->Init.Input.DataPacking));
+  assert_param(IS_DFSDM_CHANNEL_INPUT_PINS(hdfsdm_channel->Init.Input.Pins));
+  assert_param(IS_DFSDM_CHANNEL_SERIAL_INTERFACE_TYPE(hdfsdm_channel->Init.SerialInterface.Type));
+  assert_param(IS_DFSDM_CHANNEL_SPI_CLOCK(hdfsdm_channel->Init.SerialInterface.SpiClock));
+  assert_param(IS_DFSDM_CHANNEL_FILTER_ORDER(hdfsdm_channel->Init.Awd.FilterOrder));
+  assert_param(IS_DFSDM_CHANNEL_FILTER_OVS_RATIO(hdfsdm_channel->Init.Awd.Oversampling));
+  assert_param(IS_DFSDM_CHANNEL_OFFSET(hdfsdm_channel->Init.Offset));
+  assert_param(IS_DFSDM_CHANNEL_RIGHT_BIT_SHIFT(hdfsdm_channel->Init.RightBitShift));
+  
+#if defined(DFSDM2_Channel0)
+  /* Get channel counter, channel handle table and channel 0 instance */
+  if(IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance))
+  {
+    channelCounterPtr  = &v_dfsdm1ChannelCounter;
+    channelHandleTable =  a_dfsdm1ChannelHandle;
+    channel0Instance   = DFSDM1_Channel0;
+  }
+  else
+  {
+    channelCounterPtr  = &v_dfsdm2ChannelCounter;
+    channelHandleTable = a_dfsdm2ChannelHandle;
+    channel0Instance   = DFSDM2_Channel0;
+  }
+  
+  /* Check that channel has not been already initialized */
+  if(channelHandleTable[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] != NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Call MSP init function */
+  HAL_DFSDM_ChannelMspInit(hdfsdm_channel);
+  
+  /* Update the channel counter */
+  (*channelCounterPtr)++;
+  
+  /* Configure output serial clock and enable global DFSDM interface only for first channel */
+  if(*channelCounterPtr == 1U)
+  {
+    assert_param(IS_DFSDM_CHANNEL_OUTPUT_CLOCK(hdfsdm_channel->Init.OutputClock.Selection));
+    /* Set the output serial clock source */
+    channel0Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKOUTSRC);
+    channel0Instance->CHCFGR1 |= hdfsdm_channel->Init.OutputClock.Selection;
+    
+    /* Reset clock divider */
+    channel0Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKOUTDIV);
+    if(hdfsdm_channel->Init.OutputClock.Activation == ENABLE)
+    {
+      assert_param(IS_DFSDM_CHANNEL_OUTPUT_CLOCK_DIVIDER(hdfsdm_channel->Init.OutputClock.Divider));
+      /* Set the output clock divider */
+      channel0Instance->CHCFGR1 |= (uint32_t) ((hdfsdm_channel->Init.OutputClock.Divider - 1U) << 
+                                               DFSDM_CHCFGR1_CKOUTDIV_Pos);
+    }
+    
+    /* enable the DFSDM global interface */
+    channel0Instance->CHCFGR1 |= DFSDM_CHCFGR1_DFSDMEN;
+  }
+  
+  /* Set channel input parameters */
+  hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_DATPACK | DFSDM_CHCFGR1_DATMPX | 
+                                         DFSDM_CHCFGR1_CHINSEL);
+  hdfsdm_channel->Instance->CHCFGR1 |= (hdfsdm_channel->Init.Input.Multiplexer | 
+                                        hdfsdm_channel->Init.Input.DataPacking | 
+                                        hdfsdm_channel->Init.Input.Pins);
+  
+  /* Set serial interface parameters */
+  hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_SITP | DFSDM_CHCFGR1_SPICKSEL);
+  hdfsdm_channel->Instance->CHCFGR1 |= (hdfsdm_channel->Init.SerialInterface.Type | 
+                                        hdfsdm_channel->Init.SerialInterface.SpiClock);
+  
+  /* Set analog watchdog parameters */
+  hdfsdm_channel->Instance->CHAWSCDR &= ~(DFSDM_CHAWSCDR_AWFORD | DFSDM_CHAWSCDR_AWFOSR);
+  hdfsdm_channel->Instance->CHAWSCDR |= (hdfsdm_channel->Init.Awd.FilterOrder | 
+                                       ((hdfsdm_channel->Init.Awd.Oversampling - 1U) << DFSDM_CHAWSCDR_AWFOSR_Pos));
+
+  /* Set channel offset and right bit shift */
+  hdfsdm_channel->Instance->CHCFGR2 &= ~(DFSDM_CHCFGR2_OFFSET | DFSDM_CHCFGR2_DTRBS);
+  hdfsdm_channel->Instance->CHCFGR2 |= (((uint32_t) hdfsdm_channel->Init.Offset << DFSDM_CHCFGR2_OFFSET_Pos) | 
+                                        (hdfsdm_channel->Init.RightBitShift << DFSDM_CHCFGR2_DTRBS_Pos));
+
+  /* Enable DFSDM channel */
+  hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_CHEN;
+  
+  /* Set DFSDM Channel to ready state */
+  hdfsdm_channel->State = HAL_DFSDM_CHANNEL_STATE_READY;
+
+  /* Store channel handle in DFSDM channel handle table */
+  channelHandleTable[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] = hdfsdm_channel;
+  
+#else
+  /* Check that channel has not been already initialized */
+  if(a_dfsdm1ChannelHandle[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] != NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Call MSP init function */
+  HAL_DFSDM_ChannelMspInit(hdfsdm_channel);
+  
+  /* Update the channel counter */
+  v_dfsdm1ChannelCounter++;
+  
+  /* Configure output serial clock and enable global DFSDM interface only for first channel */
+  if(v_dfsdm1ChannelCounter == 1U)
+  {
+    assert_param(IS_DFSDM_CHANNEL_OUTPUT_CLOCK(hdfsdm_channel->Init.OutputClock.Selection));
+    /* Set the output serial clock source */
+    DFSDM1_Channel0->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKOUTSRC);
+    DFSDM1_Channel0->CHCFGR1 |= hdfsdm_channel->Init.OutputClock.Selection;
+    
+    /* Reset clock divider */
+    DFSDM1_Channel0->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKOUTDIV);
+    if(hdfsdm_channel->Init.OutputClock.Activation == ENABLE)
+    {
+      assert_param(IS_DFSDM_CHANNEL_OUTPUT_CLOCK_DIVIDER(hdfsdm_channel->Init.OutputClock.Divider));
+      /* Set the output clock divider */
+      DFSDM1_Channel0->CHCFGR1 |= (uint32_t) ((hdfsdm_channel->Init.OutputClock.Divider - 1U) << 
+                                             DFSDM_CHCFGR1_CKOUTDIV_Pos);
+    }
+    
+    /* enable the DFSDM global interface */
+    DFSDM1_Channel0->CHCFGR1 |= DFSDM_CHCFGR1_DFSDMEN;
+  }
+  
+  /* Set channel input parameters */
+  hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_DATPACK | DFSDM_CHCFGR1_DATMPX | 
+                                         DFSDM_CHCFGR1_CHINSEL);
+  hdfsdm_channel->Instance->CHCFGR1 |= (hdfsdm_channel->Init.Input.Multiplexer | 
+                                        hdfsdm_channel->Init.Input.DataPacking | 
+                                        hdfsdm_channel->Init.Input.Pins);
+  
+  /* Set serial interface parameters */
+  hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_SITP | DFSDM_CHCFGR1_SPICKSEL);
+  hdfsdm_channel->Instance->CHCFGR1 |= (hdfsdm_channel->Init.SerialInterface.Type | 
+                                        hdfsdm_channel->Init.SerialInterface.SpiClock);
+  
+  /* Set analog watchdog parameters */
+  hdfsdm_channel->Instance->CHAWSCDR &= ~(DFSDM_CHAWSCDR_AWFORD | DFSDM_CHAWSCDR_AWFOSR);
+  hdfsdm_channel->Instance->CHAWSCDR |= (hdfsdm_channel->Init.Awd.FilterOrder | 
+                                       ((hdfsdm_channel->Init.Awd.Oversampling - 1U) << DFSDM_CHAWSCDR_AWFOSR_Pos));
+
+  /* Set channel offset and right bit shift */
+  hdfsdm_channel->Instance->CHCFGR2 &= ~(DFSDM_CHCFGR2_OFFSET | DFSDM_CHCFGR2_DTRBS);
+  hdfsdm_channel->Instance->CHCFGR2 |= (((uint32_t) hdfsdm_channel->Init.Offset << DFSDM_CHCFGR2_OFFSET_Pos) | 
+                                        (hdfsdm_channel->Init.RightBitShift << DFSDM_CHCFGR2_DTRBS_Pos));
+
+  /* Enable DFSDM channel */
+  hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_CHEN;
+  
+  /* Set DFSDM Channel to ready state */
+  hdfsdm_channel->State = HAL_DFSDM_CHANNEL_STATE_READY;
+
+  /* Store channel handle in DFSDM channel handle table */
+  a_dfsdm1ChannelHandle[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] = hdfsdm_channel;
+#endif /* DFSDM2_Channel0 */
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  De-initialize the DFSDM channel.
+  * @param  hdfsdm_channel DFSDM channel handle.
+  * @retval HAL status.
+  */
+HAL_StatusTypeDef HAL_DFSDM_ChannelDeInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{  
+#if defined(DFSDM2_Channel0)
+  __IO uint32_t*                    channelCounterPtr;
+  DFSDM_Channel_HandleTypeDef  **channelHandleTable;
+  DFSDM_Channel_TypeDef*       channel0Instance;
+#endif /* defined(DFSDM2_Channel0) */
+  
+  /* Check DFSDM Channel handle */
+  if(hdfsdm_channel == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+  
+#if defined(DFSDM2_Channel0)
+  /* Get channel counter, channel handle table and channel 0 instance */
+  if(IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance))
+  {
+    channelCounterPtr  = &v_dfsdm1ChannelCounter;
+    channelHandleTable =  a_dfsdm1ChannelHandle;
+    channel0Instance   = DFSDM1_Channel0;
+  }
+  else
+  {
+    channelCounterPtr  = &v_dfsdm2ChannelCounter;
+    channelHandleTable =  a_dfsdm2ChannelHandle;
+    channel0Instance   = DFSDM2_Channel0;
+  }
+  
+  /* Check that channel has not been already deinitialized */
+  if(channelHandleTable[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Disable the DFSDM channel */
+  hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CHEN);
+  
+  /* Update the channel counter */
+  (*channelCounterPtr)--;
+  
+  /* Disable global DFSDM at deinit of last channel */
+  if(*channelCounterPtr == 0U)
+  {
+    channel0Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_DFSDMEN);
+  }
+
+  /* Call MSP deinit function */
+  HAL_DFSDM_ChannelMspDeInit(hdfsdm_channel);
+
+  /* Set DFSDM Channel in reset state */
+  hdfsdm_channel->State = HAL_DFSDM_CHANNEL_STATE_RESET;
+
+  /* Reset channel handle in DFSDM channel handle table */
+  channelHandleTable[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] =  NULL;
+#else
+  /* Check that channel has not been already deinitialized */
+  if(a_dfsdm1ChannelHandle[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Disable the DFSDM channel */
+  hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CHEN);
+  
+  /* Update the channel counter */
+  v_dfsdm1ChannelCounter--;
+  
+  /* Disable global DFSDM at deinit of last channel */
+  if(v_dfsdm1ChannelCounter == 0U)
+  {
+    DFSDM1_Channel0->CHCFGR1 &= ~(DFSDM_CHCFGR1_DFSDMEN);
+  }
+
+  /* Call MSP deinit function */
+  HAL_DFSDM_ChannelMspDeInit(hdfsdm_channel);
+
+  /* Set DFSDM Channel in reset state */
+  hdfsdm_channel->State = HAL_DFSDM_CHANNEL_STATE_RESET;
+
+  /* Reset channel handle in DFSDM channel handle table */
+  a_dfsdm1ChannelHandle[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] = (DFSDM_Channel_HandleTypeDef *) NULL;
+#endif /* defined(DFSDM2_Channel0) */
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initialize the DFSDM channel MSP.
+  * @param  hdfsdm_channel DFSDM channel handle.
+  * @retval None
+  */
+__weak void HAL_DFSDM_ChannelMspInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdfsdm_channel);
+  /* NOTE : This function should not be modified, when the function is needed,
+            the HAL_DFSDM_ChannelMspInit could be implemented in the user file.
+   */
+}
+
+/**
+  * @brief  De-initialize the DFSDM channel MSP.
+  * @param  hdfsdm_channel DFSDM channel handle.
+  * @retval None
+  */
+__weak void HAL_DFSDM_ChannelMspDeInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdfsdm_channel);
+  /* NOTE : This function should not be modified, when the function is needed,
+            the HAL_DFSDM_ChannelMspDeInit could be implemented in the user file.
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup DFSDM_Exported_Functions_Group2_Channel Channel operation functions
+ *  @brief    Channel operation functions
+ *
+@verbatim
+  ==============================================================================
+                   ##### Channel operation functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Manage clock absence detector feature.
+      (+) Manage short circuit detector feature.
+      (+) Get analog watchdog value.
+      (+) Modify offset value.
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  This function allows to start clock absence detection in polling mode.
+  * @note   Same mode has to be used for all channels.
+  * @note   If clock is not available on this channel during 5 seconds,
+  *         clock absence detection will not be activated and function
+  *         will return HAL_TIMEOUT error.  
+  * @param  hdfsdm_channel DFSDM channel handle.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStart(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  uint32_t tickstart;
+  uint32_t channel;
+
+#if defined(DFSDM2_Channel0)
+  DFSDM_Filter_TypeDef*       filter0Instance;
+#endif /* defined(DFSDM2_Channel0) */
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+  
+  /* Check DFSDM channel state */
+  if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY)
+  {
+    /* Return error status */
+    status = HAL_ERROR;
+  }
+  else
+  {
+#if defined (DFSDM2_Channel0)
+    /* Get channel counter, channel handle table and channel 0 instance */
+    if(IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance))
+    {
+      filter0Instance   = DFSDM1_Filter0;
+    }
+    else
+    {
+      filter0Instance   = DFSDM2_Filter0;
+    }   
+    /* Get channel number from channel instance */
+    channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance);
+
+    /* Get timeout */
+    tickstart = HAL_GetTick();
+
+    /* Clear clock absence flag */
+    while((((filter0Instance->FLTISR & DFSDM_FLTISR_CKABF) >> (DFSDM_FLTISR_CKABF_Pos + channel)) & 1U) != 0U)
+    {
+      filter0Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_Pos + channel));
+
+      /* Check the Timeout */
+      if((HAL_GetTick()-tickstart) > DFSDM_CKAB_TIMEOUT)
+      {
+        /* Set timeout status */
+        status = HAL_TIMEOUT;
+        break;
+      }
+    }
+#else
+    /* Get channel number from channel instance */
+    channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance);
+
+    /* Get timeout */
+    tickstart = HAL_GetTick();
+
+    /* Clear clock absence flag */
+    while((((DFSDM1_Filter0->FLTISR & DFSDM_FLTISR_CKABF) >> (DFSDM_FLTISR_CKABF_Pos + channel)) & 1U) != 0U)
+    {
+      DFSDM1_Filter0->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_Pos + channel));
+
+      /* Check the Timeout */
+      if((HAL_GetTick()-tickstart) > DFSDM_CKAB_TIMEOUT)
+      {
+        /* Set timeout status */
+        status = HAL_TIMEOUT;
+        break;
+      }
+    }
+#endif /* DFSDM2_Channel0 */    
+
+    if(status == HAL_OK)
+    {
+      /* Start clock absence detection */
+      hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_CKABEN;
+    }
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  This function allows to poll for the clock absence detection.
+  * @param  hdfsdm_channel DFSDM channel handle.
+  * @param  Timeout Timeout value in milliseconds.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_ChannelPollForCkab(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, 
+                                               uint32_t Timeout)
+{
+  uint32_t tickstart;
+  uint32_t channel;
+#if defined(DFSDM2_Channel0)
+  DFSDM_Filter_TypeDef*       filter0Instance;
+#endif /* defined(DFSDM2_Channel0) */
+  
+  /* Check parameters */
+  assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+
+  /* Check DFSDM channel state */
+  if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY)
+  {
+    /* Return error status */
+    return HAL_ERROR;
+  }
+  else
+  {
+#if defined(DFSDM2_Channel0)
+    
+    /* Get channel counter, channel handle table and channel 0 instance */
+    if(IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance))
+    {
+      filter0Instance   = DFSDM1_Filter0;
+    }
+    else
+    {
+      filter0Instance   = DFSDM2_Filter0;
+    }
+
+    /* Get channel number from channel instance */
+    channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance);
+    
+    /* Get timeout */
+    tickstart = HAL_GetTick();
+
+    /* Wait clock absence detection */
+    while((((filter0Instance->FLTISR & DFSDM_FLTISR_CKABF) >> (DFSDM_FLTISR_CKABF_Pos + channel)) & 1U) == 0U)
+    {
+      /* Check the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0U) || ((HAL_GetTick()-tickstart) > Timeout))
+        {
+          /* Return timeout status */
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    
+    /* Clear clock absence detection flag */
+    filter0Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_Pos + channel));   
+#else    
+    /* Get channel number from channel instance */
+    channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance);
+    
+    /* Get timeout */
+    tickstart = HAL_GetTick();
+
+    /* Wait clock absence detection */
+    while((((DFSDM1_Filter0->FLTISR & DFSDM_FLTISR_CKABF) >> (DFSDM_FLTISR_CKABF_Pos + channel)) & 1U) == 0U)
+    {
+      /* Check the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0U) || ((HAL_GetTick()-tickstart) > Timeout))
+        {
+          /* Return timeout status */
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    
+    /* Clear clock absence detection flag */
+    DFSDM1_Filter0->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_Pos + channel));
+#endif /* defined(DFSDM2_Channel0) */    
+    /* Return function status */
+    return HAL_OK;
+  }
+}
+
+/**
+  * @brief  This function allows to stop clock absence detection in polling mode.
+  * @param  hdfsdm_channel DFSDM channel handle.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStop(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  uint32_t channel;
+#if defined(DFSDM2_Channel0)
+  DFSDM_Filter_TypeDef*       filter0Instance;
+#endif /* defined(DFSDM2_Channel0) */
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+  
+  /* Check DFSDM channel state */
+  if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY)
+  {
+    /* Return error status */
+    status = HAL_ERROR;
+  }
+  else
+  {
+#if defined(DFSDM2_Channel0)
+
+    /* Get channel counter, channel handle table and channel 0 instance */
+    if(IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance))
+    {
+      filter0Instance   = DFSDM1_Filter0;
+    }
+    else
+    {
+      filter0Instance   = DFSDM2_Filter0;
+    } 
+
+    /* Stop clock absence detection */
+    hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKABEN);
+
+    /* Clear clock absence flag */
+    channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance);
+    filter0Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_Pos + channel));
+
+#else
+    /* Stop clock absence detection */
+    hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKABEN);
+    
+    /* Clear clock absence flag */
+    channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance);
+    DFSDM1_Filter0->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_Pos + channel));
+#endif /* DFSDM2_Channel0 */    
+  }
+  /* Return function status */
+  return status;
+}
+ 
+/**
+  * @brief  This function allows to start clock absence detection in interrupt mode.
+  * @note   Same mode has to be used for all channels.
+  * @note   If clock is not available on this channel during 5 seconds,
+  *         clock absence detection will not be activated and function
+  *         will return HAL_TIMEOUT error.
+  * @param  hdfsdm_channel DFSDM channel handle.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStart_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  uint32_t channel;
+  uint32_t tickstart;
+#if defined(DFSDM2_Channel0)
+  DFSDM_Filter_TypeDef*       filter0Instance;
+#endif /* defined(DFSDM2_Channel0) */
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+  
+  /* Check DFSDM channel state */
+  if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY)
+  {
+    /* Return error status */
+    status = HAL_ERROR;
+  }
+  else
+  {
+#if defined(DFSDM2_Channel0)
+
+    /* Get channel counter, channel handle table and channel 0 instance */
+    if(IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance))
+    {
+      filter0Instance   = DFSDM1_Filter0;
+    }
+    else
+    {
+      filter0Instance   = DFSDM2_Filter0;
+    }
+
+    /* Get channel number from channel instance */
+    channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance);
+
+    /* Get timeout */
+    tickstart = HAL_GetTick();
+
+    /* Clear clock absence flag */
+    while((((filter0Instance->FLTISR & DFSDM_FLTISR_CKABF) >> (DFSDM_FLTISR_CKABF_Pos + channel)) & 1U) != 0U)
+    {
+      filter0Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_Pos + channel));
+
+      /* Check the Timeout */
+      if((HAL_GetTick()-tickstart) > DFSDM_CKAB_TIMEOUT)
+      {
+        /* Set timeout status */
+        status = HAL_TIMEOUT;
+        break;
+      }
+    }
+
+    if(status == HAL_OK)
+    {
+      /* Activate clock absence detection interrupt */
+      filter0Instance->FLTCR2 |= DFSDM_FLTCR2_CKABIE;
+
+      /* Start clock absence detection */
+      hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_CKABEN;
+    }
+#else  
+    /* Get channel number from channel instance */
+    channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance);
+
+    /* Get timeout */
+    tickstart = HAL_GetTick();
+
+    /* Clear clock absence flag */
+    while((((DFSDM1_Filter0->FLTISR & DFSDM_FLTISR_CKABF) >> (DFSDM_FLTISR_CKABF_Pos + channel)) & 1U) != 0U)
+    {
+      DFSDM1_Filter0->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_Pos + channel));
+
+      /* Check the Timeout */
+      if((HAL_GetTick()-tickstart) > DFSDM_CKAB_TIMEOUT)
+      {
+        /* Set timeout status */
+        status = HAL_TIMEOUT;
+        break;
+      }
+    }
+
+    if(status == HAL_OK)
+    {
+      /* Activate clock absence detection interrupt */
+      DFSDM1_Filter0->FLTCR2 |= DFSDM_FLTCR2_CKABIE;
+
+      /* Start clock absence detection */
+      hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_CKABEN;
+    }
+
+#endif /* defined(DFSDM2_Channel0) */ 
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  Clock absence detection callback. 
+  * @param  hdfsdm_channel DFSDM channel handle.
+  * @retval None
+  */
+__weak void HAL_DFSDM_ChannelCkabCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdfsdm_channel);
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_DFSDM_ChannelCkabCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  This function allows to stop clock absence detection in interrupt mode.
+  * @note   Interrupt will be disabled for all channels
+  * @param  hdfsdm_channel DFSDM channel handle.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStop_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  uint32_t channel;
+#if defined(DFSDM2_Channel0)
+  DFSDM_Filter_TypeDef*       filter0Instance;
+#endif /* defined(DFSDM2_Channel0) */
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+  
+  /* Check DFSDM channel state */
+  if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY)
+  {
+    /* Return error status */
+    status = HAL_ERROR;
+  }
+  else
+  {
+#if defined(DFSDM2_Channel0)
+
+    /* Get channel counter, channel handle table and channel 0 instance */
+    if(IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance))
+    {
+      filter0Instance   = DFSDM1_Filter0;
+    }
+    else
+    {
+      filter0Instance   = DFSDM2_Filter0;
+    } 
+
+    /* Stop clock absence detection */
+    hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKABEN);
+
+    /* Clear clock absence flag */
+    channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance);
+    filter0Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_Pos + channel));
+
+    /* Disable clock absence detection interrupt */
+    filter0Instance->FLTCR2 &= ~(DFSDM_FLTCR2_CKABIE); 
+#else
+
+    /* Stop clock absence detection */
+    hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKABEN);
+    
+    /* Clear clock absence flag */
+    channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance);
+    DFSDM1_Filter0->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_Pos + channel));
+
+    /* Disable clock absence detection interrupt */
+    DFSDM1_Filter0->FLTCR2 &= ~(DFSDM_FLTCR2_CKABIE);
+#endif /* DFSDM2_Channel0 */
+  }
+
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  This function allows to start short circuit detection in polling mode.
+  * @note   Same mode has to be used for all channels
+  * @param  hdfsdm_channel DFSDM channel handle.
+  * @param  Threshold Short circuit detector threshold.
+  *         This parameter must be a number between Min_Data = 0 and Max_Data = 255.
+  * @param  BreakSignal Break signals assigned to short circuit event.
+  *         This parameter can be a values combination of @ref DFSDM_BreakSignals.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_ChannelScdStart(DFSDM_Channel_HandleTypeDef *hdfsdm_channel,
+                                            uint32_t Threshold,
+                                            uint32_t BreakSignal)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+  assert_param(IS_DFSDM_CHANNEL_SCD_THRESHOLD(Threshold));
+  assert_param(IS_DFSDM_BREAK_SIGNALS(BreakSignal));
+  
+  /* Check DFSDM channel state */
+  if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY)
+  {
+    /* Return error status */
+    status = HAL_ERROR;
+  }
+  else
+  {
+    /* Configure threshold and break signals */
+    hdfsdm_channel->Instance->CHAWSCDR &= ~(DFSDM_CHAWSCDR_BKSCD | DFSDM_CHAWSCDR_SCDT);
+    hdfsdm_channel->Instance->CHAWSCDR |= ((BreakSignal << DFSDM_CHAWSCDR_BKSCD_Pos) | \
+                                         Threshold);
+    
+    /* Start short circuit detection */
+    hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_SCDEN;
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  This function allows to poll for the short circuit detection.
+  * @param  hdfsdm_channel DFSDM channel handle.
+  * @param  Timeout Timeout value in milliseconds.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_ChannelPollForScd(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, 
+                                              uint32_t Timeout)
+{
+  uint32_t tickstart;
+  uint32_t channel;
+#if defined(DFSDM2_Channel0)
+  DFSDM_Filter_TypeDef*       filter0Instance;
+#endif /* defined(DFSDM2_Channel0) */
+  
+  /* Check parameters */
+  assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+
+  /* Check DFSDM channel state */
+  if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY)
+  {
+    /* Return error status */
+    return HAL_ERROR;
+  }
+  else
+  {
+    /* Get channel number from channel instance */
+    channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance);
+
+#if defined(DFSDM2_Channel0)
+    /* Get channel counter, channel handle table and channel 0 instance */
+    if(IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance))
+    {
+      filter0Instance   = DFSDM1_Filter0;
+    }
+    else
+    {
+      filter0Instance   = DFSDM2_Filter0;
+    }
+
+   /* Get timeout */
+    tickstart = HAL_GetTick();
+
+    /* Wait short circuit detection */
+    while(((filter0Instance->FLTISR & DFSDM_FLTISR_SCDF) >> (DFSDM_FLTISR_SCDF_Pos + channel)) == 0U)
+    {
+      /* Check the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0U) || ((HAL_GetTick()-tickstart) > Timeout))
+        {
+          /* Return timeout status */
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    
+    /* Clear short circuit detection flag */
+    filter0Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRSCSDF_Pos + channel));
+
+#else
+    /* Get timeout */
+    tickstart = HAL_GetTick();
+
+    /* Wait short circuit detection */
+    while(((DFSDM1_Filter0->FLTISR & DFSDM_FLTISR_SCDF) >> (DFSDM_FLTISR_SCDF_Pos + channel)) == 0U)
+    {
+      /* Check the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0U) || ((HAL_GetTick()-tickstart) > Timeout))
+        {
+          /* Return timeout status */
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+
+    /* Clear short circuit detection flag */
+    DFSDM1_Filter0->FLTICR = (1U << (DFSDM_FLTICR_CLRSCSDF_Pos + channel));
+#endif /* DFSDM2_Channel0 */ 
+
+    /* Return function status */
+    return HAL_OK;
+  }
+}
+
+/**
+  * @brief  This function allows to stop short circuit detection in polling mode.
+  * @param  hdfsdm_channel DFSDM channel handle.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_ChannelScdStop(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  uint32_t channel;
+#if defined(DFSDM2_Channel0)
+  DFSDM_Filter_TypeDef*       filter0Instance;
+#endif /* defined(DFSDM2_Channel0) */  
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+  
+  /* Check DFSDM channel state */
+  if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY)
+  {
+    /* Return error status */
+    status = HAL_ERROR;
+  }
+  else
+  {
+    /* Stop short circuit detection */
+    hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_SCDEN);
+
+    /* Clear short circuit detection flag */
+    channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance);
+    
+#if defined(DFSDM2_Channel0)
+    /* Get channel counter, channel handle table and channel 0 instance */
+    if(IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance))
+    {
+      filter0Instance   = DFSDM1_Filter0;
+    }
+    else
+    {
+      filter0Instance   = DFSDM2_Filter0;
+    }
+
+    filter0Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRSCSDF_Pos + channel));
+#else
+    DFSDM1_Filter0->FLTICR = (1U << (DFSDM_FLTICR_CLRSCSDF_Pos + channel));
+#endif /* DFSDM2_Channel0*/
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  This function allows to start short circuit detection in interrupt mode.
+  * @note   Same mode has to be used for all channels
+  * @param  hdfsdm_channel DFSDM channel handle.
+  * @param  Threshold Short circuit detector threshold.
+  *         This parameter must be a number between Min_Data = 0 and Max_Data = 255.
+  * @param  BreakSignal Break signals assigned to short circuit event.
+  *         This parameter can be a values combination of @ref DFSDM_BreakSignals.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_ChannelScdStart_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel,
+                                               uint32_t Threshold,
+                                               uint32_t BreakSignal)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+#if defined(DFSDM2_Channel0)
+  DFSDM_Filter_TypeDef*       filter0Instance;
+#endif /* defined(DFSDM2_Channel0) */ 
+  
+  /* Check parameters */
+  assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+  assert_param(IS_DFSDM_CHANNEL_SCD_THRESHOLD(Threshold));
+  assert_param(IS_DFSDM_BREAK_SIGNALS(BreakSignal));
+  
+  /* Check DFSDM channel state */
+  if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY)
+  {
+    /* Return error status */
+    status = HAL_ERROR;
+  }
+  else
+  {
+#if defined(DFSDM2_Channel0)
+    /* Get channel counter, channel handle table and channel 0 instance */
+    if(IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance))
+    {
+      filter0Instance   = DFSDM1_Filter0;
+    }
+    else
+    {
+      filter0Instance   = DFSDM2_Filter0;
+    }
+    /* Activate short circuit detection interrupt */
+    filter0Instance->FLTCR2 |= DFSDM_FLTCR2_SCDIE;
+#else
+    /* Activate short circuit detection interrupt */
+    DFSDM1_Filter0->FLTCR2 |= DFSDM_FLTCR2_SCDIE;
+#endif /* DFSDM2_Channel0 */
+
+    /* Configure threshold and break signals */
+    hdfsdm_channel->Instance->CHAWSCDR &= ~(DFSDM_CHAWSCDR_BKSCD | DFSDM_CHAWSCDR_SCDT);
+    hdfsdm_channel->Instance->CHAWSCDR |= ((BreakSignal << DFSDM_CHAWSCDR_BKSCD_Pos) | \
+                                         Threshold);
+    
+    /* Start short circuit detection */
+    hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_SCDEN;
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  Short circuit detection callback. 
+  * @param  hdfsdm_channel DFSDM channel handle.
+  * @retval None
+  */
+__weak void HAL_DFSDM_ChannelScdCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdfsdm_channel);
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_DFSDM_ChannelScdCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  This function allows to stop short circuit detection in interrupt mode.
+  * @note   Interrupt will be disabled for all channels
+  * @param  hdfsdm_channel DFSDM channel handle.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_ChannelScdStop_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  uint32_t channel;
+#if defined(DFSDM2_Channel0)
+  DFSDM_Filter_TypeDef*       filter0Instance;
+#endif /* defined(DFSDM2_Channel0) */
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+  
+  /* Check DFSDM channel state */
+  if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY)
+  {
+    /* Return error status */
+    status = HAL_ERROR;
+  }
+  else
+  {
+    /* Stop short circuit detection */
+    hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_SCDEN);
+    
+    /* Clear short circuit detection flag */
+    channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance);
+#if defined(DFSDM2_Channel0)
+    /* Get channel counter, channel handle table and channel 0 instance */
+    if(IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance))
+    {
+      filter0Instance   = DFSDM1_Filter0;
+    }
+    else
+    {
+      filter0Instance   = DFSDM2_Filter0;
+    }
+
+    filter0Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRSCSDF_Pos + channel));
+
+    /* Disable short circuit detection interrupt */
+    filter0Instance->FLTCR2 &= ~(DFSDM_FLTCR2_SCDIE);
+#else
+   DFSDM1_Filter0->FLTICR = (1U << (DFSDM_FLTICR_CLRSCSDF_Pos + channel));
+
+    /* Disable short circuit detection interrupt */
+    DFSDM1_Filter0->FLTCR2 &= ~(DFSDM_FLTCR2_SCDIE);
+#endif /* DFSDM2_Channel0 */
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  This function allows to get channel analog watchdog value.
+  * @param  hdfsdm_channel DFSDM channel handle.
+  * @retval Channel analog watchdog value.
+  */
+int16_t HAL_DFSDM_ChannelGetAwdValue(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+  return (int16_t) hdfsdm_channel->Instance->CHWDATAR;
+}
+
+/**
+  * @brief  This function allows to modify channel offset value.
+  * @param  hdfsdm_channel DFSDM channel handle.
+  * @param  Offset DFSDM channel offset.
+  *         This parameter must be a number between Min_Data = -8388608 and Max_Data = 8388607.
+  * @retval HAL status.
+  */
+HAL_StatusTypeDef HAL_DFSDM_ChannelModifyOffset(DFSDM_Channel_HandleTypeDef *hdfsdm_channel,
+                                                int32_t Offset)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance));
+  assert_param(IS_DFSDM_CHANNEL_OFFSET(Offset));
+  
+  /* Check DFSDM channel state */
+  if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY)
+  {
+    /* Return error status */
+    status = HAL_ERROR;
+  }
+  else
+  {
+    /* Modify channel offset */
+    hdfsdm_channel->Instance->CHCFGR2 &= ~(DFSDM_CHCFGR2_OFFSET);
+    hdfsdm_channel->Instance->CHCFGR2 |= ((uint32_t) Offset << DFSDM_CHCFGR2_OFFSET_Pos);
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup DFSDM_Exported_Functions_Group3_Channel Channel state function
+ *  @brief    Channel state function
+ *
+@verbatim
+  ==============================================================================
+                   ##### Channel state function #####
+  ==============================================================================
+    [..]  This section provides function allowing to:
+      (+) Get channel handle state.
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  This function allows to get the current DFSDM channel handle state.
+  * @param  hdfsdm_channel DFSDM channel handle.
+  * @retval DFSDM channel state.
+  */
+HAL_DFSDM_Channel_StateTypeDef HAL_DFSDM_ChannelGetState(DFSDM_Channel_HandleTypeDef *hdfsdm_channel)
+{
+  /* Return DFSDM channel handle state */
+  return hdfsdm_channel->State;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup DFSDM_Exported_Functions_Group1_Filter Filter initialization and de-initialization functions
+ *  @brief    Filter initialization and de-initialization functions 
+ *
+@verbatim
+  ==============================================================================
+        ##### Filter initialization and de-initialization functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize the DFSDM filter.
+      (+) De-initialize the DFSDM filter.
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initialize the DFSDM filter according to the specified parameters
+  *         in the DFSDM_FilterInitTypeDef structure and initialize the associated handle.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval HAL status.
+  */
+HAL_StatusTypeDef HAL_DFSDM_FilterInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+  /* Check DFSDM Channel handle */
+  if(hdfsdm_filter == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+  assert_param(IS_DFSDM_FILTER_REG_TRIGGER(hdfsdm_filter->Init.RegularParam.Trigger));
+  assert_param(IS_FUNCTIONAL_STATE(hdfsdm_filter->Init.RegularParam.FastMode));
+  assert_param(IS_FUNCTIONAL_STATE(hdfsdm_filter->Init.RegularParam.DmaMode));
+  assert_param(IS_DFSDM_FILTER_INJ_TRIGGER(hdfsdm_filter->Init.InjectedParam.Trigger));
+  assert_param(IS_FUNCTIONAL_STATE(hdfsdm_filter->Init.InjectedParam.ScanMode));
+  assert_param(IS_FUNCTIONAL_STATE(hdfsdm_filter->Init.InjectedParam.DmaMode));
+  assert_param(IS_DFSDM_FILTER_SINC_ORDER(hdfsdm_filter->Init.FilterParam.SincOrder));
+  assert_param(IS_DFSDM_FILTER_OVS_RATIO(hdfsdm_filter->Init.FilterParam.Oversampling));
+  assert_param(IS_DFSDM_FILTER_INTEGRATOR_OVS_RATIO(hdfsdm_filter->Init.FilterParam.IntOversampling));
+
+  /* Check parameters compatibility */
+  if((hdfsdm_filter->Instance == DFSDM1_Filter0) && 
+    ((hdfsdm_filter->Init.RegularParam.Trigger  == DFSDM_FILTER_SYNC_TRIGGER) || 
+     (hdfsdm_filter->Init.InjectedParam.Trigger == DFSDM_FILTER_SYNC_TRIGGER)))
+  {
+    return HAL_ERROR;
+  }
+#if defined (DFSDM2_Channel0)  
+  if((hdfsdm_filter->Instance == DFSDM2_Filter0) && 
+    ((hdfsdm_filter->Init.RegularParam.Trigger  == DFSDM_FILTER_SYNC_TRIGGER) || 
+     (hdfsdm_filter->Init.InjectedParam.Trigger == DFSDM_FILTER_SYNC_TRIGGER)))
+  {
+    return HAL_ERROR;
+  }  
+#endif /* DFSDM2_Channel0 */
+       
+  /* Initialize DFSDM filter variables with default values */
+  hdfsdm_filter->RegularContMode     = DFSDM_CONTINUOUS_CONV_OFF;
+  hdfsdm_filter->InjectedChannelsNbr = 1U;
+  hdfsdm_filter->InjConvRemaining    = 1U;
+  hdfsdm_filter->ErrorCode           = DFSDM_FILTER_ERROR_NONE;
+  
+  /* Call MSP init function */
+  HAL_DFSDM_FilterMspInit(hdfsdm_filter);
+
+  /* Set regular parameters */
+  hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_RSYNC);
+  if(hdfsdm_filter->Init.RegularParam.FastMode == ENABLE)
+  {
+    hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_FAST;
+  }
+  else
+  {
+    hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_FAST);
+  }
+
+  if(hdfsdm_filter->Init.RegularParam.DmaMode == ENABLE)
+  {
+    hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_RDMAEN;
+  }
+  else
+  {
+    hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_RDMAEN);
+  }
+
+  /* Set injected parameters */
+  hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_JSYNC | DFSDM_FLTCR1_JEXTEN | DFSDM_FLTCR1_JEXTSEL);
+  if(hdfsdm_filter->Init.InjectedParam.Trigger == DFSDM_FILTER_EXT_TRIGGER)
+  {
+    assert_param(IS_DFSDM_FILTER_EXT_TRIG(hdfsdm_filter->Init.InjectedParam.ExtTrigger));
+    assert_param(IS_DFSDM_FILTER_EXT_TRIG_EDGE(hdfsdm_filter->Init.InjectedParam.ExtTriggerEdge));
+    hdfsdm_filter->Instance->FLTCR1 |= (hdfsdm_filter->Init.InjectedParam.ExtTrigger);
+  }
+
+  if(hdfsdm_filter->Init.InjectedParam.ScanMode == ENABLE)
+  {
+    hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JSCAN;
+  }
+  else
+  {
+    hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_JSCAN);
+  }
+
+  if(hdfsdm_filter->Init.InjectedParam.DmaMode == ENABLE)
+  {
+    hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JDMAEN;
+  }
+  else
+  {
+    hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_JDMAEN);
+  }
+  
+  /* Set filter parameters */
+  hdfsdm_filter->Instance->FLTFCR &= ~(DFSDM_FLTFCR_FORD | DFSDM_FLTFCR_FOSR | DFSDM_FLTFCR_IOSR);
+  hdfsdm_filter->Instance->FLTFCR |= (hdfsdm_filter->Init.FilterParam.SincOrder |
+                                    ((hdfsdm_filter->Init.FilterParam.Oversampling - 1U) << DFSDM_FLTFCR_FOSR_Pos) |
+                                     (hdfsdm_filter->Init.FilterParam.IntOversampling - 1U));
+
+  /* Store regular and injected triggers and injected scan mode*/
+  hdfsdm_filter->RegularTrigger   = hdfsdm_filter->Init.RegularParam.Trigger;
+  hdfsdm_filter->InjectedTrigger  = hdfsdm_filter->Init.InjectedParam.Trigger;
+  hdfsdm_filter->ExtTriggerEdge   = hdfsdm_filter->Init.InjectedParam.ExtTriggerEdge;
+  hdfsdm_filter->InjectedScanMode = hdfsdm_filter->Init.InjectedParam.ScanMode;
+  
+  /* Enable DFSDM filter */
+  hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_DFEN;
+
+  /* Set DFSDM filter to ready state */
+  hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_READY;
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  De-initializes the DFSDM filter.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval HAL status.
+  */
+HAL_StatusTypeDef HAL_DFSDM_FilterDeInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+  /* Check DFSDM filter handle */
+  if(hdfsdm_filter == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+  
+  /* Disable the DFSDM filter */
+  hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN);
+  
+  /* Call MSP deinit function */
+  HAL_DFSDM_FilterMspDeInit(hdfsdm_filter);
+
+  /* Set DFSDM filter in reset state */
+  hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_RESET;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the DFSDM filter MSP.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval None
+  */
+__weak void HAL_DFSDM_FilterMspInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdfsdm_filter);
+  /* NOTE : This function should not be modified, when the function is needed,
+            the HAL_DFSDM_FilterMspInit could be implemented in the user file.
+   */
+}
+
+/**
+  * @brief  De-initializes the DFSDM filter MSP.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval None
+  */
+__weak void HAL_DFSDM_FilterMspDeInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdfsdm_filter);
+  /* NOTE : This function should not be modified, when the function is needed,
+            the HAL_DFSDM_FilterMspDeInit could be implemented in the user file.
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup DFSDM_Exported_Functions_Group2_Filter Filter control functions
+ *  @brief    Filter control functions
+ *
+@verbatim
+  ==============================================================================
+                    ##### Filter control functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Select channel and enable/disable continuous mode for regular conversion.
+      (+) Select channels for injected conversion.
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  This function allows to select channel and to enable/disable
+  *         continuous mode for regular conversion.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @param  Channel Channel for regular conversion.
+  *         This parameter can be a value of @ref DFSDM_Channel_Selection.
+  * @param  ContinuousMode Enable/disable continuous mode for regular conversion.
+  *         This parameter can be a value of @ref DFSDM_ContinuousMode.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_FilterConfigRegChannel(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+                                                   uint32_t                    Channel,
+                                                   uint32_t                    ContinuousMode)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+  assert_param(IS_DFSDM_REGULAR_CHANNEL(Channel));
+  assert_param(IS_DFSDM_CONTINUOUS_MODE(ContinuousMode));
+  
+  /* Check DFSDM filter state */
+  if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_RESET) && 
+     (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_ERROR))
+  {
+    /* Configure channel and continuous mode for regular conversion */
+    hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_RCH | DFSDM_FLTCR1_RCONT);
+    if(ContinuousMode == DFSDM_CONTINUOUS_CONV_ON)
+    {
+      hdfsdm_filter->Instance->FLTCR1 |= (uint32_t) (((Channel & DFSDM_MSB_MASK) << DFSDM_FLTCR1_MSB_RCH_OFFSET) |
+                                                     DFSDM_FLTCR1_RCONT);
+    }
+    else
+    {
+      hdfsdm_filter->Instance->FLTCR1 |= (uint32_t) ((Channel & DFSDM_MSB_MASK) << DFSDM_FLTCR1_MSB_RCH_OFFSET);
+    }
+    /* Store continuous mode information */
+    hdfsdm_filter->RegularContMode = ContinuousMode;
+  }  
+  else
+  {
+    status = HAL_ERROR;
+  }
+
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  This function allows to select channels for injected conversion.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @param  Channel Channels for injected conversion.
+  *         This parameter can be a values combination of @ref DFSDM_Channel_Selection.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_FilterConfigInjChannel(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+                                                   uint32_t                    Channel)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+  assert_param(IS_DFSDM_INJECTED_CHANNEL(Channel));
+  
+  /* Check DFSDM filter state */
+  if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_RESET) && 
+     (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_ERROR))
+  {
+    /* Configure channel for injected conversion */
+    hdfsdm_filter->Instance->FLTJCHGR = (uint32_t) (Channel & DFSDM_LSB_MASK);
+    /* Store number of injected channels */
+    hdfsdm_filter->InjectedChannelsNbr = DFSDM_GetInjChannelsNbr(Channel);
+    /* Update number of injected channels remaining */
+    hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \
+                                      hdfsdm_filter->InjectedChannelsNbr : 1U;
+  }
+  else
+  {
+    status = HAL_ERROR;
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup DFSDM_Exported_Functions_Group3_Filter Filter operation functions
+ *  @brief    Filter operation functions
+ *
+@verbatim
+  ==============================================================================
+                    ##### Filter operation functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Start conversion of regular/injected channel.
+      (+) Poll for the end of regular/injected conversion.
+      (+) Stop conversion of regular/injected channel.
+      (+) Start conversion of regular/injected channel and enable interrupt.
+      (+) Call the callback functions at the end of regular/injected conversions.
+      (+) Stop conversion of regular/injected channel and disable interrupt.
+      (+) Start conversion of regular/injected channel and enable DMA transfer.
+      (+) Stop conversion of regular/injected channel and disable DMA transfer.
+      (+) Start analog watchdog and enable interrupt.
+      (+) Call the callback function when analog watchdog occurs.
+      (+) Stop analog watchdog and disable interrupt.
+      (+) Start extreme detector.
+      (+) Stop extreme detector.
+      (+) Get result of regular channel conversion.
+      (+) Get result of injected channel conversion.
+      (+) Get extreme detector maximum and minimum values.
+      (+) Get conversion time.
+      (+) Handle DFSDM interrupt request.
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  This function allows to start regular conversion in polling mode.
+  * @note   This function should be called only when DFSDM filter instance is 
+  *         in idle state or if injected conversion is ongoing.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+  /* Check DFSDM filter state */
+  if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \
+     (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ))
+  {
+    /* Start regular conversion */
+    DFSDM_RegConvStart(hdfsdm_filter);
+  }
+  else
+  {
+    status = HAL_ERROR;
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  This function allows to poll for the end of regular conversion.
+  * @note   This function should be called only if regular conversion is ongoing.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @param  Timeout Timeout value in milliseconds.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_FilterPollForRegConversion(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+                                                       uint32_t                    Timeout)
+{
+  uint32_t tickstart;
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+  /* Check DFSDM filter state */
+  if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG) && \
+     (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ))
+  {
+    /* Return error status */
+    return HAL_ERROR;
+  }
+  else
+  {
+    /* Get timeout */
+    tickstart = HAL_GetTick();  
+
+    /* Wait end of regular conversion */
+    while((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_REOCF) != DFSDM_FLTISR_REOCF)
+    {
+      /* Check the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0U) || ((HAL_GetTick()-tickstart) > Timeout))
+        {
+          /* Return timeout status */
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    /* Check if overrun occurs */
+    if((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_ROVRF) == DFSDM_FLTISR_ROVRF)
+    {
+      /* Update error code and call error callback */
+      hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_REGULAR_OVERRUN;
+      HAL_DFSDM_FilterErrorCallback(hdfsdm_filter);
+
+      /* Clear regular overrun flag */
+      hdfsdm_filter->Instance->FLTICR = DFSDM_FLTICR_CLRROVRF;
+    }
+    /* Update DFSDM filter state only if not continuous conversion and SW trigger */
+    if((hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \
+       (hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER))
+    {
+      hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG) ? \
+                             HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_INJ;
+    }
+    /* Return function status */
+    return HAL_OK;
+  }
+}
+
+/**
+  * @brief  This function allows to stop regular conversion in polling mode.
+  * @note   This function should be called only if regular conversion is ongoing.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+  /* Check DFSDM filter state */
+  if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG) && \
+     (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ))
+  {
+    /* Return error status */
+    status = HAL_ERROR;
+  }
+  else
+  {
+    /* Stop regular conversion */
+    DFSDM_RegConvStop(hdfsdm_filter);
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  This function allows to start regular conversion in interrupt mode.
+  * @note   This function should be called only when DFSDM filter instance is 
+  *         in idle state or if injected conversion is ongoing.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+  /* Check DFSDM filter state */
+  if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \
+     (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ))
+  {
+    /* Enable interrupts for regular conversions */
+    hdfsdm_filter->Instance->FLTCR2 |= (DFSDM_FLTCR2_REOCIE | DFSDM_FLTCR2_ROVRIE);
+    
+    /* Start regular conversion */
+    DFSDM_RegConvStart(hdfsdm_filter);
+  }
+  else
+  {
+    status = HAL_ERROR;
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  This function allows to stop regular conversion in interrupt mode.
+  * @note   This function should be called only if regular conversion is ongoing.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+  /* Check DFSDM filter state */
+  if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG) && \
+     (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ))
+  {
+    /* Return error status */
+    status = HAL_ERROR;
+  }
+  else
+  {
+    /* Disable interrupts for regular conversions */
+    hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_REOCIE | DFSDM_FLTCR2_ROVRIE);
+    
+    /* Stop regular conversion */
+    DFSDM_RegConvStop(hdfsdm_filter);
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  This function allows to start regular conversion in DMA mode.
+  * @note   This function should be called only when DFSDM filter instance is 
+  *         in idle state or if injected conversion is ongoing.
+  *         Please note that data on buffer will contain signed regular conversion
+  *         value on 24 most significant bits and corresponding channel on 3 least
+  *         significant bits.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @param  pData The destination buffer address.
+  * @param  Length The length of data to be transferred from DFSDM filter to memory.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+                                                   int32_t                    *pData,
+                                                   uint32_t                    Length)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+  /* Check destination address and length */
+  if((pData == NULL) || (Length == 0U))
+  {
+    status = HAL_ERROR;
+  }
+  /* Check that DMA is enabled for regular conversion */
+  else if((hdfsdm_filter->Instance->FLTCR1 & DFSDM_FLTCR1_RDMAEN) != DFSDM_FLTCR1_RDMAEN)
+  {
+    status = HAL_ERROR;
+  }
+  /* Check parameters compatibility */
+  else if((hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER) && \
+          (hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \
+          (hdfsdm_filter->hdmaReg->Init.Mode == DMA_NORMAL) && \
+          (Length != 1U))
+  {
+    status = HAL_ERROR;
+  }
+  else if((hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER) && \
+          (hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \
+          (hdfsdm_filter->hdmaReg->Init.Mode == DMA_CIRCULAR))
+  {
+    status = HAL_ERROR;
+  }
+  /* Check DFSDM filter state */
+  else if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \
+          (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ))
+  {
+    /* Set callbacks on DMA handler */
+    hdfsdm_filter->hdmaReg->XferCpltCallback = DFSDM_DMARegularConvCplt;
+    hdfsdm_filter->hdmaReg->XferErrorCallback = DFSDM_DMAError;
+    hdfsdm_filter->hdmaReg->XferHalfCpltCallback = (hdfsdm_filter->hdmaReg->Init.Mode == DMA_CIRCULAR) ?\
+                                                   DFSDM_DMARegularHalfConvCplt : NULL;
+    
+    /* Start DMA in interrupt mode */
+    if(HAL_DMA_Start_IT(hdfsdm_filter->hdmaReg, (uint32_t)&hdfsdm_filter->Instance->FLTRDATAR, \
+                        (uint32_t) pData, Length) != HAL_OK)
+    {
+      /* Set DFSDM filter in error state */
+      hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR;
+      status = HAL_ERROR;
+    }
+    else
+    {
+      /* Start regular conversion */
+      DFSDM_RegConvStart(hdfsdm_filter);
+    }
+  }
+  else
+  {
+    status = HAL_ERROR;
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  This function allows to start regular conversion in DMA mode and to get
+  *         only the 16 most significant bits of conversion.
+  * @note   This function should be called only when DFSDM filter instance is 
+  *         in idle state or if injected conversion is ongoing.
+  *         Please note that data on buffer will contain signed 16 most significant
+  *         bits of regular conversion.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @param  pData The destination buffer address.
+  * @param  Length The length of data to be transferred from DFSDM filter to memory.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularMsbStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+                                                      int16_t                    *pData,
+                                                      uint32_t                    Length)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+  /* Check destination address and length */
+  if((pData == NULL) || (Length == 0U))
+  {
+    status = HAL_ERROR;
+  }
+  /* Check that DMA is enabled for regular conversion */
+  else if((hdfsdm_filter->Instance->FLTCR1 & DFSDM_FLTCR1_RDMAEN) != DFSDM_FLTCR1_RDMAEN)
+  {
+    status = HAL_ERROR;
+  }
+  /* Check parameters compatibility */
+  else if((hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER) && \
+          (hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \
+          (hdfsdm_filter->hdmaReg->Init.Mode == DMA_NORMAL) && \
+          (Length != 1U))
+  {
+    status = HAL_ERROR;
+  }
+  else if((hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER) && \
+          (hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \
+          (hdfsdm_filter->hdmaReg->Init.Mode == DMA_CIRCULAR))
+  {
+    status = HAL_ERROR;
+  }
+  /* Check DFSDM filter state */
+  else if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \
+          (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ))
+  {
+    /* Set callbacks on DMA handler */
+    hdfsdm_filter->hdmaReg->XferCpltCallback = DFSDM_DMARegularConvCplt;
+    hdfsdm_filter->hdmaReg->XferErrorCallback = DFSDM_DMAError;
+    hdfsdm_filter->hdmaReg->XferHalfCpltCallback = (hdfsdm_filter->hdmaReg->Init.Mode == DMA_CIRCULAR) ?\
+                                                   DFSDM_DMARegularHalfConvCplt : NULL;
+    
+    /* Start DMA in interrupt mode */
+    if(HAL_DMA_Start_IT(hdfsdm_filter->hdmaReg, (uint32_t)(&hdfsdm_filter->Instance->FLTRDATAR) + 2U, \
+                        (uint32_t) pData, Length) != HAL_OK)
+    {
+      /* Set DFSDM filter in error state */
+      hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR;
+      status = HAL_ERROR;
+    }
+    else
+    {
+      /* Start regular conversion */
+      DFSDM_RegConvStart(hdfsdm_filter);
+    }
+  }
+  else
+  {
+    status = HAL_ERROR;
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  This function allows to stop regular conversion in DMA mode.
+  * @note   This function should be called only if regular conversion is ongoing.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+  /* Check DFSDM filter state */
+  if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG) && \
+     (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ))
+  {
+    /* Return error status */
+    status = HAL_ERROR;
+  }
+  else
+  {
+    /* Stop current DMA transfer */
+    if(HAL_DMA_Abort(hdfsdm_filter->hdmaReg) != HAL_OK)
+    {
+      /* Set DFSDM filter in error state */
+      hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR;
+      status = HAL_ERROR;
+    }
+    else
+    {
+      /* Stop regular conversion */
+      DFSDM_RegConvStop(hdfsdm_filter);
+    }
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  This function allows to get regular conversion value.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @param  Channel Corresponding channel of regular conversion.
+  * @retval Regular conversion value
+  */
+int32_t HAL_DFSDM_FilterGetRegularValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+                                        uint32_t                   *Channel)
+{
+  uint32_t reg = 0U;
+  int32_t  value = 0;
+  
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+  assert_param(Channel != NULL);
+
+  /* Get value of data register for regular channel */
+  reg = hdfsdm_filter->Instance->FLTRDATAR;
+  
+  /* Extract channel and regular conversion value */
+  *Channel = (reg & DFSDM_FLTRDATAR_RDATACH);
+  value = ((int32_t)(reg & DFSDM_FLTRDATAR_RDATA) >> DFSDM_FLTRDATAR_RDATA_Pos);
+
+  /* return regular conversion value */
+  return value;
+}
+
+/**
+  * @brief  This function allows to start injected conversion in polling mode.
+  * @note   This function should be called only when DFSDM filter instance is 
+  *         in idle state or if regular conversion is ongoing.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+  /* Check DFSDM filter state */
+  if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \
+     (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG))
+  {
+    /* Start injected conversion */
+    DFSDM_InjConvStart(hdfsdm_filter);
+  }
+  else
+  {
+    status = HAL_ERROR;
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  This function allows to poll for the end of injected conversion.
+  * @note   This function should be called only if injected conversion is ongoing.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @param  Timeout Timeout value in milliseconds.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_FilterPollForInjConversion(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+                                                       uint32_t                    Timeout)
+{
+  uint32_t tickstart;
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+  /* Check DFSDM filter state */
+  if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_INJ) && \
+     (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ))
+  {
+    /* Return error status */
+    return HAL_ERROR;
+  }
+  else
+  {
+    /* Get timeout */
+    tickstart = HAL_GetTick();  
+
+    /* Wait end of injected conversions */
+    while((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_JEOCF) != DFSDM_FLTISR_JEOCF)
+    {
+      /* Check the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0U) || ((HAL_GetTick()-tickstart) > Timeout))
+        {
+          /* Return timeout status */
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    /* Check if overrun occurs */
+    if((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_JOVRF) == DFSDM_FLTISR_JOVRF)
+    {
+      /* Update error code and call error callback */
+      hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INJECTED_OVERRUN;
+      HAL_DFSDM_FilterErrorCallback(hdfsdm_filter);
+
+      /* Clear injected overrun flag */
+      hdfsdm_filter->Instance->FLTICR = DFSDM_FLTICR_CLRJOVRF;
+    }
+
+    /* Update remaining injected conversions */
+    hdfsdm_filter->InjConvRemaining--;
+    if(hdfsdm_filter->InjConvRemaining == 0U)
+    {
+      /* Update DFSDM filter state only if trigger is software */
+      if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER)
+      {
+        hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ) ? \
+                               HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_REG;
+      }
+      
+      /* end of injected sequence, reset the value */
+      hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \
+                                         hdfsdm_filter->InjectedChannelsNbr : 1U;
+    }
+
+    /* Return function status */
+    return HAL_OK;
+  }
+}
+
+/**
+  * @brief  This function allows to stop injected conversion in polling mode.
+  * @note   This function should be called only if injected conversion is ongoing.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+  /* Check DFSDM filter state */
+  if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_INJ) && \
+     (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ))
+  {
+    /* Return error status */
+    status = HAL_ERROR;
+  }
+  else
+  {
+    /* Stop injected conversion */
+    DFSDM_InjConvStop(hdfsdm_filter);
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  This function allows to start injected conversion in interrupt mode.
+  * @note   This function should be called only when DFSDM filter instance is 
+  *         in idle state or if regular conversion is ongoing.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+  /* Check DFSDM filter state */
+  if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \
+     (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG))
+  {
+    /* Enable interrupts for injected conversions */
+    hdfsdm_filter->Instance->FLTCR2 |= (DFSDM_FLTCR2_JEOCIE | DFSDM_FLTCR2_JOVRIE);
+    
+    /* Start injected conversion */
+    DFSDM_InjConvStart(hdfsdm_filter);
+  }
+  else
+  {
+    status = HAL_ERROR;
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  This function allows to stop injected conversion in interrupt mode.
+  * @note   This function should be called only if injected conversion is ongoing.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+  /* Check DFSDM filter state */
+  if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_INJ) && \
+     (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ))
+  {
+    /* Return error status */
+    status = HAL_ERROR;
+  }
+  else
+  {
+    /* Disable interrupts for injected conversions */
+    hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_JEOCIE | DFSDM_FLTCR2_JOVRIE);
+    
+    /* Stop injected conversion */
+    DFSDM_InjConvStop(hdfsdm_filter);
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  This function allows to start injected conversion in DMA mode.
+  * @note   This function should be called only when DFSDM filter instance is 
+  *         in idle state or if regular conversion is ongoing.
+  *         Please note that data on buffer will contain signed injected conversion
+  *         value on 24 most significant bits and corresponding channel on 3 least
+  *         significant bits.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @param  pData The destination buffer address.
+  * @param  Length The length of data to be transferred from DFSDM filter to memory.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+                                                    int32_t                    *pData,
+                                                    uint32_t                    Length)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+  /* Check destination address and length */
+  if((pData == NULL) || (Length == 0U))
+  {
+    status = HAL_ERROR;
+  }
+  /* Check that DMA is enabled for injected conversion */
+  else if((hdfsdm_filter->Instance->FLTCR1 & DFSDM_FLTCR1_JDMAEN) != DFSDM_FLTCR1_JDMAEN)
+  {
+    status = HAL_ERROR;
+  }
+  /* Check parameters compatibility */
+  else if((hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) && \
+          (hdfsdm_filter->hdmaInj->Init.Mode == DMA_NORMAL) && \
+          (Length > hdfsdm_filter->InjConvRemaining))
+  {
+    status = HAL_ERROR;
+  }
+  else if((hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) && \
+          (hdfsdm_filter->hdmaInj->Init.Mode == DMA_CIRCULAR))
+  {
+    status = HAL_ERROR;
+  }
+  /* Check DFSDM filter state */
+  else if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \
+          (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG))
+  {
+    /* Set callbacks on DMA handler */
+    hdfsdm_filter->hdmaInj->XferCpltCallback = DFSDM_DMAInjectedConvCplt;
+    hdfsdm_filter->hdmaInj->XferErrorCallback = DFSDM_DMAError;
+    hdfsdm_filter->hdmaInj->XferHalfCpltCallback = (hdfsdm_filter->hdmaInj->Init.Mode == DMA_CIRCULAR) ?\
+                                                   DFSDM_DMAInjectedHalfConvCplt : NULL;
+    
+    /* Start DMA in interrupt mode */
+    if(HAL_DMA_Start_IT(hdfsdm_filter->hdmaInj, (uint32_t)&hdfsdm_filter->Instance->FLTJDATAR, \
+                        (uint32_t) pData, Length) != HAL_OK)
+    {
+      /* Set DFSDM filter in error state */
+      hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR;
+      status = HAL_ERROR;
+    }
+    else
+    {
+      /* Start injected conversion */
+      DFSDM_InjConvStart(hdfsdm_filter);
+    }
+  }
+  else
+  {
+    status = HAL_ERROR;
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  This function allows to start injected conversion in DMA mode and to get
+  *         only the 16 most significant bits of conversion.
+  * @note   This function should be called only when DFSDM filter instance is 
+  *         in idle state or if regular conversion is ongoing.
+  *         Please note that data on buffer will contain signed 16 most significant
+  *         bits of injected conversion.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @param  pData The destination buffer address.
+  * @param  Length The length of data to be transferred from DFSDM filter to memory.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedMsbStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+                                                       int16_t                    *pData,
+                                                       uint32_t                    Length)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+  /* Check destination address and length */
+  if((pData == NULL) || (Length == 0U))
+  {
+    status = HAL_ERROR;
+  }
+  /* Check that DMA is enabled for injected conversion */
+  else if((hdfsdm_filter->Instance->FLTCR1 & DFSDM_FLTCR1_JDMAEN) != DFSDM_FLTCR1_JDMAEN)
+  {
+    status = HAL_ERROR;
+  }
+  /* Check parameters compatibility */
+  else if((hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) && \
+          (hdfsdm_filter->hdmaInj->Init.Mode == DMA_NORMAL) && \
+          (Length > hdfsdm_filter->InjConvRemaining))
+  {
+    status = HAL_ERROR;
+  }
+  else if((hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) && \
+          (hdfsdm_filter->hdmaInj->Init.Mode == DMA_CIRCULAR))
+  {
+    status = HAL_ERROR;
+  }
+  /* Check DFSDM filter state */
+  else if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \
+          (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG))
+  {
+    /* Set callbacks on DMA handler */
+    hdfsdm_filter->hdmaInj->XferCpltCallback = DFSDM_DMAInjectedConvCplt;
+    hdfsdm_filter->hdmaInj->XferErrorCallback = DFSDM_DMAError;
+    hdfsdm_filter->hdmaInj->XferHalfCpltCallback = (hdfsdm_filter->hdmaInj->Init.Mode == DMA_CIRCULAR) ?\
+                                                   DFSDM_DMAInjectedHalfConvCplt : NULL;
+    
+    /* Start DMA in interrupt mode */
+    if(HAL_DMA_Start_IT(hdfsdm_filter->hdmaInj, (uint32_t)(&hdfsdm_filter->Instance->FLTJDATAR) + 2U, \
+                        (uint32_t) pData, Length) != HAL_OK)
+    {
+      /* Set DFSDM filter in error state */
+      hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR;
+      status = HAL_ERROR;
+    }
+    else
+    {
+      /* Start injected conversion */
+      DFSDM_InjConvStart(hdfsdm_filter);
+    }
+  }
+  else
+  {
+    status = HAL_ERROR;
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  This function allows to stop injected conversion in DMA mode.
+  * @note   This function should be called only if injected conversion is ongoing.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+  /* Check DFSDM filter state */
+  if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_INJ) && \
+     (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ))
+  {
+    /* Return error status */
+    status = HAL_ERROR;
+  }
+  else
+  {
+    /* Stop current DMA transfer */
+    if(HAL_DMA_Abort(hdfsdm_filter->hdmaInj) != HAL_OK)
+    {
+      /* Set DFSDM filter in error state */
+      hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR;
+      status = HAL_ERROR;
+    }
+    else
+    {
+      /* Stop regular conversion */
+      DFSDM_InjConvStop(hdfsdm_filter);
+    }
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  This function allows to get injected conversion value.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @param  Channel Corresponding channel of injected conversion.
+  * @retval Injected conversion value
+  */
+int32_t HAL_DFSDM_FilterGetInjectedValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, 
+                                         uint32_t                   *Channel)
+{
+  uint32_t reg = 0U;
+  int32_t  value = 0;
+  
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+  assert_param(Channel != NULL);
+
+  /* Get value of data register for injected channel */
+  reg = hdfsdm_filter->Instance->FLTJDATAR;
+  
+  /* Extract channel and injected conversion value */
+  *Channel = (reg & DFSDM_FLTJDATAR_JDATACH);
+  value = ((int32_t)(reg & DFSDM_FLTJDATAR_JDATA) >> DFSDM_FLTJDATAR_JDATA_Pos);
+
+  /* return regular conversion value */
+  return value;
+}
+
+/**
+  * @brief  This function allows to start filter analog watchdog in interrupt mode.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @param  awdParam DFSDM filter analog watchdog parameters.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_FilterAwdStart_IT(DFSDM_Filter_HandleTypeDef   *hdfsdm_filter,
+                                              DFSDM_Filter_AwdParamTypeDef *awdParam)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+  assert_param(IS_DFSDM_FILTER_AWD_DATA_SOURCE(awdParam->DataSource));
+  assert_param(IS_DFSDM_INJECTED_CHANNEL(awdParam->Channel));
+  assert_param(IS_DFSDM_FILTER_AWD_THRESHOLD(awdParam->HighThreshold));
+  assert_param(IS_DFSDM_FILTER_AWD_THRESHOLD(awdParam->LowThreshold));
+  assert_param(IS_DFSDM_BREAK_SIGNALS(awdParam->HighBreakSignal));
+  assert_param(IS_DFSDM_BREAK_SIGNALS(awdParam->LowBreakSignal));
+  
+  /* Check DFSDM filter state */
+  if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_RESET) || \
+     (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_ERROR))
+  {
+    /* Return error status */
+    status = HAL_ERROR;
+  }
+  else
+  {
+    /* Set analog watchdog data source */
+    hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_AWFSEL);
+    hdfsdm_filter->Instance->FLTCR1 |= awdParam->DataSource;
+
+    /* Set thresholds and break signals */
+    hdfsdm_filter->Instance->FLTAWHTR &= ~(DFSDM_FLTAWHTR_AWHT | DFSDM_FLTAWHTR_BKAWH);
+    hdfsdm_filter->Instance->FLTAWHTR |= (((uint32_t) awdParam->HighThreshold << DFSDM_FLTAWHTR_AWHT_Pos) | \
+                                           awdParam->HighBreakSignal);
+    hdfsdm_filter->Instance->FLTAWLTR &= ~(DFSDM_FLTAWLTR_AWLT | DFSDM_FLTAWLTR_BKAWL);
+    hdfsdm_filter->Instance->FLTAWLTR |= (((uint32_t) awdParam->LowThreshold << DFSDM_FLTAWLTR_AWLT_Pos) | \
+                                           awdParam->LowBreakSignal);
+
+    /* Set channels and interrupt for analog watchdog */
+    hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_AWDCH);
+    hdfsdm_filter->Instance->FLTCR2 |= (((awdParam->Channel & DFSDM_LSB_MASK) << DFSDM_FLTCR2_AWDCH_Pos) | \
+                                        DFSDM_FLTCR2_AWDIE);
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  This function allows to stop filter analog watchdog in interrupt mode.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_FilterAwdStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+  
+  /* Check DFSDM filter state */
+  if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_RESET) || \
+     (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_ERROR))
+  {
+    /* Return error status */
+    status = HAL_ERROR;
+  }
+  else
+  {
+    /* Reset channels for analog watchdog and deactivate interrupt */
+    hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_AWDCH | DFSDM_FLTCR2_AWDIE);
+
+    /* Clear all analog watchdog flags */
+    hdfsdm_filter->Instance->FLTAWCFR = (DFSDM_FLTAWCFR_CLRAWHTF | DFSDM_FLTAWCFR_CLRAWLTF);
+    
+    /* Reset thresholds and break signals */
+    hdfsdm_filter->Instance->FLTAWHTR &= ~(DFSDM_FLTAWHTR_AWHT | DFSDM_FLTAWHTR_BKAWH);
+    hdfsdm_filter->Instance->FLTAWLTR &= ~(DFSDM_FLTAWLTR_AWLT | DFSDM_FLTAWLTR_BKAWL);
+
+    /* Reset analog watchdog data source */
+    hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_AWFSEL);
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  This function allows to start extreme detector feature.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @param  Channel Channels where extreme detector is enabled.
+  *         This parameter can be a values combination of @ref DFSDM_Channel_Selection.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_FilterExdStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+                                           uint32_t                    Channel)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+  assert_param(IS_DFSDM_INJECTED_CHANNEL(Channel));
+  
+  /* Check DFSDM filter state */
+  if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_RESET) || \
+     (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_ERROR))
+  {
+    /* Return error status */
+    status = HAL_ERROR;
+  }
+  else
+  {
+    /* Set channels for extreme detector */
+    hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_EXCH);
+    hdfsdm_filter->Instance->FLTCR2 |= ((Channel & DFSDM_LSB_MASK) << DFSDM_FLTCR2_EXCH_Pos);    
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  This function allows to stop extreme detector feature.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DFSDM_FilterExdStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  __IO uint32_t     reg1;
+  __IO uint32_t     reg2;
+
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+  
+  /* Check DFSDM filter state */
+  if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_RESET) || \
+     (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_ERROR))
+  {
+    /* Return error status */
+    status = HAL_ERROR;
+  }
+  else
+  {
+    /* Reset channels for extreme detector */
+    hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_EXCH);
+
+    /* Clear extreme detector values */
+    reg1 = hdfsdm_filter->Instance->FLTEXMAX;
+    reg2 = hdfsdm_filter->Instance->FLTEXMIN;    
+    UNUSED(reg1); /* To avoid GCC warning */
+    UNUSED(reg2); /* To avoid GCC warning */
+  }
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  This function allows to get extreme detector maximum value.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @param  Channel Corresponding channel.
+  * @retval Extreme detector maximum value
+  *         This value is between Min_Data = -8388608 and Max_Data = 8388607.
+  */
+int32_t HAL_DFSDM_FilterGetExdMaxValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+                                       uint32_t                   *Channel)
+{
+  uint32_t reg = 0U;
+  int32_t  value = 0;
+  
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+  assert_param(Channel != NULL);
+
+  /* Get value of extreme detector maximum register */
+  reg = hdfsdm_filter->Instance->FLTEXMAX;
+  
+  /* Extract channel and extreme detector maximum value */
+  *Channel = (reg & DFSDM_FLTEXMAX_EXMAXCH);
+  value = ((int32_t)(reg & DFSDM_FLTEXMAX_EXMAX) >> DFSDM_FLTEXMAX_EXMAX_Pos);
+
+  /* return extreme detector maximum value */
+  return value;
+}
+
+/**
+  * @brief  This function allows to get extreme detector minimum value.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @param  Channel Corresponding channel.
+  * @retval Extreme detector minimum value
+  *         This value is between Min_Data = -8388608 and Max_Data = 8388607.
+  */
+int32_t HAL_DFSDM_FilterGetExdMinValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+                                       uint32_t                   *Channel)
+{
+  uint32_t reg = 0U;
+  int32_t  value = 0;
+  
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+  assert_param(Channel != NULL);
+
+  /* Get value of extreme detector minimum register */
+  reg = hdfsdm_filter->Instance->FLTEXMIN;
+  
+  /* Extract channel and extreme detector minimum value */
+  *Channel = (reg & DFSDM_FLTEXMIN_EXMINCH);
+  value = ((int32_t)(reg & DFSDM_FLTEXMIN_EXMIN) >> DFSDM_FLTEXMIN_EXMIN_Pos);
+
+  /* return extreme detector minimum value */
+  return value;
+}
+
+/**
+  * @brief  This function allows to get conversion time value.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval Conversion time value
+  * @note   To get time in second, this value has to be divided by DFSDM clock frequency.
+  */
+uint32_t HAL_DFSDM_FilterGetConvTimeValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+  uint32_t reg = 0U;
+  uint32_t value = 0U;
+  
+  /* Check parameters */
+  assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance));
+
+  /* Get value of conversion timer register */
+  reg = hdfsdm_filter->Instance->FLTCNVTIMR;
+  
+  /* Extract conversion time value */
+  value = ((reg & DFSDM_FLTCNVTIMR_CNVCNT) >> DFSDM_FLTCNVTIMR_CNVCNT_Pos);
+
+  /* return extreme detector minimum value */
+  return value;
+}
+
+/**
+  * @brief  This function handles the DFSDM interrupts.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval None
+  */
+void HAL_DFSDM_IRQHandler(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+  /* Check if overrun occurs during regular conversion */
+  if(((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_ROVRF) != 0U) && \
+     ((hdfsdm_filter->Instance->FLTCR2 & DFSDM_FLTCR2_ROVRIE) != 0U))
+  {
+    /* Clear regular overrun flag */
+    hdfsdm_filter->Instance->FLTICR = DFSDM_FLTICR_CLRROVRF;
+
+    /* Update error code */
+    hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_REGULAR_OVERRUN;
+
+    /* Call error callback */
+    HAL_DFSDM_FilterErrorCallback(hdfsdm_filter);
+  }
+  /* Check if overrun occurs during injected conversion */
+  else if(((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_JOVRF) != 0U) && \
+          ((hdfsdm_filter->Instance->FLTCR2 & DFSDM_FLTCR2_JOVRIE) != 0U))
+  {
+    /* Clear injected overrun flag */
+    hdfsdm_filter->Instance->FLTICR = DFSDM_FLTICR_CLRJOVRF;
+
+    /* Update error code */
+    hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INJECTED_OVERRUN;
+
+    /* Call error callback */
+    HAL_DFSDM_FilterErrorCallback(hdfsdm_filter);
+  }
+  /* Check if end of regular conversion */
+  else if(((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_REOCF) != 0U) && \
+          ((hdfsdm_filter->Instance->FLTCR2 & DFSDM_FLTCR2_REOCIE) != 0U))
+  {
+    /* Call regular conversion complete callback */
+    HAL_DFSDM_FilterRegConvCpltCallback(hdfsdm_filter);
+
+    /* End of conversion if mode is not continuous and software trigger */
+    if((hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \
+       (hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER))
+    {
+      /* Disable interrupts for regular conversions */
+      hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_REOCIE);
+
+      /* Update DFSDM filter state */
+      hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG) ? \
+                             HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_INJ;
+    }
+  }
+  /* Check if end of injected conversion */
+  else if(((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_JEOCF) != 0U) && \
+          ((hdfsdm_filter->Instance->FLTCR2 & DFSDM_FLTCR2_JEOCIE) != 0U))
+  {
+    /* Call injected conversion complete callback */
+    HAL_DFSDM_FilterInjConvCpltCallback(hdfsdm_filter);
+
+    /* Update remaining injected conversions */
+    hdfsdm_filter->InjConvRemaining--;
+    if(hdfsdm_filter->InjConvRemaining == 0U)
+    {
+      /* End of conversion if trigger is software */
+      if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER)
+      {
+        /* Disable interrupts for injected conversions */
+        hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_JEOCIE);
+
+        /* Update DFSDM filter state */
+        hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ) ? \
+                               HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_REG;
+      }
+      /* end of injected sequence, reset the value */
+      hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \
+                                         hdfsdm_filter->InjectedChannelsNbr : 1U;
+    }
+  }
+  /* Check if analog watchdog occurs */
+  else if(((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_AWDF) != 0U) && \
+          ((hdfsdm_filter->Instance->FLTCR2 & DFSDM_FLTCR2_AWDIE) != 0U))
+  {
+    uint32_t reg = 0U;
+    uint32_t threshold = 0U;
+    uint32_t channel = 0U;
+    
+    /* Get channel and threshold */
+    reg = hdfsdm_filter->Instance->FLTAWSR;
+    threshold = ((reg & DFSDM_FLTAWSR_AWLTF) != 0U) ? DFSDM_AWD_LOW_THRESHOLD : DFSDM_AWD_HIGH_THRESHOLD;
+    if(threshold == DFSDM_AWD_HIGH_THRESHOLD)
+    {
+      reg = reg >> DFSDM_FLTAWSR_AWHTF_Pos;
+    }
+    while((reg & 1U) == 0U)
+    {
+      channel++;
+      reg = reg >> 1U;
+    }
+    /* Clear analog watchdog flag */
+    hdfsdm_filter->Instance->FLTAWCFR = (threshold == DFSDM_AWD_HIGH_THRESHOLD) ? \
+                                        (1U << (DFSDM_FLTAWSR_AWHTF_Pos + channel)) : \
+                                        (1U << channel);
+
+    /* Call analog watchdog callback */
+    HAL_DFSDM_FilterAwdCallback(hdfsdm_filter, channel, threshold);
+  }
+  /* Check if clock absence occurs */
+  else if((hdfsdm_filter->Instance == DFSDM1_Filter0) && \
+         ((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_CKABF) != 0U) && \
+         ((hdfsdm_filter->Instance->FLTCR2 & DFSDM_FLTCR2_CKABIE) != 0U))
+  {
+    uint32_t reg = 0U;
+    uint32_t channel = 0U;
+    
+    reg = ((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_CKABF) >> DFSDM_FLTISR_CKABF_Pos);
+
+    while(channel < DFSDM1_CHANNEL_NUMBER)
+    {
+      /* Check if flag is set and corresponding channel is enabled */
+      if(((reg & 1U) != 0U) && (a_dfsdm1ChannelHandle[channel] != NULL))
+      {
+        /* Check clock absence has been enabled for this channel */
+        if((a_dfsdm1ChannelHandle[channel]->Instance->CHCFGR1 & DFSDM_CHCFGR1_CKABEN) != 0U)
+        {
+          /* Clear clock absence flag */
+          hdfsdm_filter->Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_Pos + channel));
+
+          /* Call clock absence callback */
+          HAL_DFSDM_ChannelCkabCallback(a_dfsdm1ChannelHandle[channel]);
+        }
+      }
+      channel++;
+      reg = reg >> 1U;
+    }
+  }
+#if defined (DFSDM2_Channel0)     
+  /* Check if clock absence occurs */
+  else if((hdfsdm_filter->Instance == DFSDM2_Filter0) && \
+         ((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_CKABF) != 0U) && \
+         ((hdfsdm_filter->Instance->FLTCR2 & DFSDM_FLTCR2_CKABIE) != 0U))
+  {
+    uint32_t reg = 0U;
+    uint32_t channel = 0U;
+    
+    reg = ((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_CKABF) >> DFSDM_FLTISR_CKABF_Pos);
+
+    while(channel < DFSDM2_CHANNEL_NUMBER)
+    {
+      /* Check if flag is set and corresponding channel is enabled */
+      if(((reg & 1U) != 0U) && (a_dfsdm2ChannelHandle[channel] != NULL))
+      {
+        /* Check clock absence has been enabled for this channel */
+        if((a_dfsdm2ChannelHandle[channel]->Instance->CHCFGR1 & DFSDM_CHCFGR1_CKABEN) != 0U)
+        {
+          /* Clear clock absence flag */
+          hdfsdm_filter->Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRCKABF_Pos + channel));
+
+          /* Call clock absence callback */
+          HAL_DFSDM_ChannelCkabCallback(a_dfsdm2ChannelHandle[channel]);
+        }
+      }
+      channel++;
+      reg = reg >> 1U;
+    }
+  }
+#endif /* DFSDM2_Channel0 */  
+  /* Check if short circuit detection occurs */
+  else if((hdfsdm_filter->Instance == DFSDM1_Filter0) && \
+         ((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_SCDF) != 0U) && \
+         ((hdfsdm_filter->Instance->FLTCR2 & DFSDM_FLTCR2_SCDIE) != 0U))
+  {
+    uint32_t reg = 0U;
+    uint32_t channel = 0U;
+    
+    /* Get channel */
+    reg = ((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_SCDF) >> DFSDM_FLTISR_SCDF_Pos);
+    while((reg & 1U) == 0U)
+    {
+      channel++;
+      reg = reg >> 1U;
+    }
+    
+    /* Clear short circuit detection flag */
+    hdfsdm_filter->Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRSCSDF_Pos + channel));
+
+    /* Call short circuit detection callback */
+    HAL_DFSDM_ChannelScdCallback(a_dfsdm1ChannelHandle[channel]);
+  }
+#if defined (DFSDM2_Channel0)   
+  /* Check if short circuit detection occurs */
+  else if((hdfsdm_filter->Instance == DFSDM2_Filter0) && \
+         ((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_SCDF) != 0U) && \
+         ((hdfsdm_filter->Instance->FLTCR2 & DFSDM_FLTCR2_SCDIE) != 0U))
+  {
+    uint32_t reg = 0U;
+    uint32_t channel = 0U;
+    
+    /* Get channel */
+    reg = ((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_SCDF) >> DFSDM_FLTISR_SCDF_Pos);
+    while((reg & 1U) == 0U)
+    {
+      channel++;
+      reg = reg >> 1U;
+    }
+    
+    /* Clear short circuit detection flag */
+    hdfsdm_filter->Instance->FLTICR = (1U << (DFSDM_FLTICR_CLRSCSDF_Pos + channel));
+
+    /* Call short circuit detection callback */
+    HAL_DFSDM_ChannelScdCallback(a_dfsdm2ChannelHandle[channel]);
+  }
+#endif /* DFSDM2_Channel0 */  
+}
+
+/**
+  * @brief  Regular conversion complete callback. 
+  * @note   In interrupt mode, user has to read conversion value in this function
+  *         using HAL_DFSDM_FilterGetRegularValue.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval None
+  */
+__weak void HAL_DFSDM_FilterRegConvCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdfsdm_filter);
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_DFSDM_FilterRegConvCpltCallback could be implemented in the user file.
+   */
+}
+
+/**
+  * @brief  Half regular conversion complete callback. 
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval None
+  */
+__weak void HAL_DFSDM_FilterRegConvHalfCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdfsdm_filter);
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_DFSDM_FilterRegConvHalfCpltCallback could be implemented in the user file.
+   */
+}
+
+/**
+  * @brief  Injected conversion complete callback. 
+  * @note   In interrupt mode, user has to read conversion value in this function
+  *         using HAL_DFSDM_FilterGetInjectedValue.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval None
+  */
+__weak void HAL_DFSDM_FilterInjConvCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdfsdm_filter);
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_DFSDM_FilterInjConvCpltCallback could be implemented in the user file.
+   */
+}
+
+/**
+  * @brief  Half injected conversion complete callback. 
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval None
+  */
+__weak void HAL_DFSDM_FilterInjConvHalfCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdfsdm_filter);
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_DFSDM_FilterInjConvHalfCpltCallback could be implemented in the user file.
+   */
+}
+
+/**
+  * @brief  Filter analog watchdog callback. 
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @param  Channel Corresponding channel.
+  * @param  Threshold Low or high threshold has been reached.
+  * @retval None
+  */
+__weak void HAL_DFSDM_FilterAwdCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+                                        uint32_t Channel, uint32_t Threshold)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdfsdm_filter);
+  UNUSED(Channel);
+  UNUSED(Threshold);
+  
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_DFSDM_FilterAwdCallback could be implemented in the user file.
+   */
+}
+
+/**
+  * @brief  Error callback. 
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval None
+  */
+__weak void HAL_DFSDM_FilterErrorCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdfsdm_filter);
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_DFSDM_FilterErrorCallback could be implemented in the user file.
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup DFSDM_Exported_Functions_Group4_Filter Filter state functions
+ *  @brief    Filter state functions
+ *
+@verbatim
+  ==============================================================================
+                     ##### Filter state functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Get the DFSDM filter state.
+      (+) Get the DFSDM filter error.
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  This function allows to get the current DFSDM filter handle state.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval DFSDM filter state.
+  */
+HAL_DFSDM_Filter_StateTypeDef HAL_DFSDM_FilterGetState(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+  /* Return DFSDM filter handle state */
+  return hdfsdm_filter->State;
+}
+
+/**
+  * @brief  This function allows to get the current DFSDM filter error.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval DFSDM filter error code.
+  */
+uint32_t HAL_DFSDM_FilterGetError(DFSDM_Filter_HandleTypeDef *hdfsdm_filter)
+{
+  return hdfsdm_filter->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup DFSDM_Exported_Functions_Group5_Filter MultiChannel operation functions
+ *  @brief    Filter state functions
+ *
+@verbatim
+  ==============================================================================
+                     ##### Filter MultiChannel operation functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Control the DFSDM Multi channel delay block
+@endverbatim
+  * @{
+  */
+#if defined(SYSCFG_MCHDLYCR_BSCKSEL)
+/**
+  * @brief  Select the DFSDM2 as clock source for the bitstream clock.
+  * @note   The SYSCFG clock marco __HAL_RCC_SYSCFG_CLK_ENABLE() must be called 
+  *         before HAL_DFSDM_BitstreamClock_Start()  
+  */
+void HAL_DFSDM_BitstreamClock_Start(void)
+{
+  uint32_t tmp = 0; 
+  
+  tmp = SYSCFG->MCHDLYCR;
+  tmp = (tmp &(~SYSCFG_MCHDLYCR_BSCKSEL));
+
+  SYSCFG->MCHDLYCR  = (tmp|SYSCFG_MCHDLYCR_BSCKSEL);
+}
+
+/**
+  * @brief Stop the DFSDM2 as clock source for the bitstream clock.
+  * @note   The SYSCFG clock marco __HAL_RCC_SYSCFG_CLK_ENABLE() must be called 
+  *         before HAL_DFSDM_BitstreamClock_Stop()     
+  * @retval None
+  */
+void HAL_DFSDM_BitstreamClock_Stop(void)
+{
+  uint32_t tmp = 0U; 
+  
+  tmp = SYSCFG->MCHDLYCR;
+  tmp = (tmp &(~SYSCFG_MCHDLYCR_BSCKSEL));
+
+  SYSCFG->MCHDLYCR  = tmp;
+}
+
+/**
+  * @brief  Disable Delay Clock for DFSDM1/2.
+  * @param MCHDLY HAL_MCHDLY_CLOCK_DFSDM2.
+  *               HAL_MCHDLY_CLOCK_DFSDM1.
+  * @note   The SYSCFG clock marco __HAL_RCC_SYSCFG_CLK_ENABLE() must be called 
+  *         before HAL_DFSDM_DisableDelayClock()     
+  * @retval None
+  */
+void HAL_DFSDM_DisableDelayClock(uint32_t MCHDLY)
+{
+  uint32_t tmp = 0U; 
+  
+  assert_param(IS_DFSDM_DELAY_CLOCK(MCHDLY));
+  
+  tmp = SYSCFG->MCHDLYCR;
+  if(MCHDLY == HAL_MCHDLY_CLOCK_DFSDM2)
+  {
+    tmp = tmp &(~SYSCFG_MCHDLYCR_MCHDLY2EN);
+  }
+  else
+  {
+    tmp = tmp &(~SYSCFG_MCHDLYCR_MCHDLY1EN);
+  }
+
+  SYSCFG->MCHDLYCR  = tmp;
+}
+
+/**
+  * @brief  Enable Delay Clock for DFSDM1/2.
+  * @param MCHDLY HAL_MCHDLY_CLOCK_DFSDM2.
+  *               HAL_MCHDLY_CLOCK_DFSDM1.
+  * @note   The SYSCFG clock marco __HAL_RCC_SYSCFG_CLK_ENABLE() must be called 
+  *         before HAL_DFSDM_EnableDelayClock()       
+  * @retval None
+  */
+void HAL_DFSDM_EnableDelayClock(uint32_t MCHDLY)
+{
+  uint32_t tmp = 0U; 
+
+  assert_param(IS_DFSDM_DELAY_CLOCK(MCHDLY));
+
+  tmp = SYSCFG->MCHDLYCR;
+  tmp = tmp & ~MCHDLY;
+
+  SYSCFG->MCHDLYCR  = (tmp|MCHDLY);
+}
+
+/**
+  * @brief  Select the source for CKin signals for DFSDM1/2.
+  * @param source DFSDM2_CKIN_PAD.
+  *               DFSDM2_CKIN_DM.
+  *               DFSDM1_CKIN_PAD.
+  *               DFSDM1_CKIN_DM.
+  * @retval None
+  */
+void HAL_DFSDM_ClockIn_SourceSelection(uint32_t source)
+{
+  uint32_t tmp = 0U; 
+  
+  assert_param(IS_DFSDM_CLOCKIN_SELECTION(source));
+
+  tmp = SYSCFG->MCHDLYCR;
+  
+  if((source == HAL_DFSDM2_CKIN_PAD) || (source == HAL_DFSDM2_CKIN_DM))
+  {
+    tmp =  (tmp & ~SYSCFG_MCHDLYCR_DFSDM2CFG);
+    
+    if(source == HAL_DFSDM2_CKIN_PAD) 
+    {
+      source = 0x000000U;
+    }
+  }
+  else
+  {
+    tmp =  (tmp & ~SYSCFG_MCHDLYCR_DFSDM1CFG);
+  }
+
+  SYSCFG->MCHDLYCR = (source|tmp);
+}
+
+/**
+  * @brief  Select the source for CKOut signals for DFSDM1/2.
+  * @param source: DFSDM2_CKOUT_DFSDM2.
+  *                DFSDM2_CKOUT_M27. 
+  *                DFSDM1_CKOUT_DFSDM1.
+  *                DFSDM1_CKOUT_M27.
+  * @retval None
+  */
+void HAL_DFSDM_ClockOut_SourceSelection(uint32_t source)
+{
+  uint32_t tmp = 0U; 
+  
+  assert_param(IS_DFSDM_CLOCKOUT_SELECTION(source));
+  
+  tmp = SYSCFG->MCHDLYCR;
+
+  if((source == HAL_DFSDM2_CKOUT_DFSDM2) || (source == HAL_DFSDM2_CKOUT_M27))
+  {
+    tmp =  (tmp & ~SYSCFG_MCHDLYCR_DFSDM2CKOSEL);
+    
+    if(source == HAL_DFSDM2_CKOUT_DFSDM2)
+    {
+      source = 0x000U;
+    }
+  }
+  else
+  {
+    tmp =  (tmp & ~SYSCFG_MCHDLYCR_DFSDM1CKOSEL);
+  }
+
+  SYSCFG->MCHDLYCR = (source|tmp);
+}
+
+/**
+  * @brief  Select the source for DataIn0 signals for DFSDM1/2.
+  * @param source DATAIN0_DFSDM2_PAD.
+  *               DATAIN0_DFSDM2_DATAIN1. 
+  *               DATAIN0_DFSDM1_PAD.
+  *               DATAIN0_DFSDM1_DATAIN1.                  
+  * @retval None
+  */
+void HAL_DFSDM_DataIn0_SourceSelection(uint32_t source)
+{
+  uint32_t tmp = 0U; 
+
+  assert_param(IS_DFSDM_DATAIN0_SRC_SELECTION(source));
+
+  tmp = SYSCFG->MCHDLYCR;
+  
+  if((source == HAL_DATAIN0_DFSDM2_PAD)|| (source == HAL_DATAIN0_DFSDM2_DATAIN1))
+  {
+    tmp =  (tmp & ~SYSCFG_MCHDLYCR_DFSDM2D0SEL);
+    if(source == HAL_DATAIN0_DFSDM2_PAD)
+    {
+      source = 0x00000U;
+    }
+  }
+  else
+  {
+    tmp =  (tmp & ~SYSCFG_MCHDLYCR_DFSDM1D0SEL);
+  }
+  SYSCFG->MCHDLYCR = (source|tmp);
+}
+
+/**
+  * @brief  Select the source for DataIn2 signals for DFSDM1/2.
+  * @param source DATAIN2_DFSDM2_PAD.
+  *               DATAIN2_DFSDM2_DATAIN3. 
+  *               DATAIN2_DFSDM1_PAD.
+  *               DATAIN2_DFSDM1_DATAIN3.
+  * @retval None
+  */
+void HAL_DFSDM_DataIn2_SourceSelection(uint32_t source)
+{
+  uint32_t tmp = 0U; 
+
+  assert_param(IS_DFSDM_DATAIN2_SRC_SELECTION(source));
+
+  tmp = SYSCFG->MCHDLYCR;
+  
+  if((source == HAL_DATAIN2_DFSDM2_PAD)|| (source == HAL_DATAIN2_DFSDM2_DATAIN3))
+  {
+    tmp =  (tmp & ~SYSCFG_MCHDLYCR_DFSDM2D2SEL);
+    if (source == HAL_DATAIN2_DFSDM2_PAD)
+    {
+      source = 0x0000U;
+    }     
+  }
+  else
+  {
+    tmp =  (tmp & ~SYSCFG_MCHDLYCR_DFSDM1D2SEL);
+  }
+  SYSCFG->MCHDLYCR = (source|tmp);
+}
+
+/**
+  * @brief  Select the source for DataIn4 signals for DFSDM2.
+  * @param source DATAIN4_DFSDM2_PAD.
+  *               DATAIN4_DFSDM2_DATAIN5
+  * @retval None
+  */
+void HAL_DFSDM_DataIn4_SourceSelection(uint32_t source)
+{
+  uint32_t tmp = 0U; 
+
+  assert_param(IS_DFSDM_DATAIN4_SRC_SELECTION(source));
+
+  tmp = SYSCFG->MCHDLYCR;
+  tmp =  (tmp & ~SYSCFG_MCHDLYCR_DFSDM2D4SEL);
+
+  SYSCFG->MCHDLYCR = (source|tmp);
+}
+
+/**
+  * @brief  Select the source for DataIn6 signals for DFSDM2.
+  * @param source DATAIN6_DFSDM2_PAD.
+  *               DATAIN6_DFSDM2_DATAIN7.
+  * @retval None
+  */
+void HAL_DFSDM_DataIn6_SourceSelection(uint32_t source)
+{
+  uint32_t tmp = 0U; 
+
+  assert_param(IS_DFSDM_DATAIN6_SRC_SELECTION(source));
+
+  tmp = SYSCFG->MCHDLYCR;
+  
+  tmp =  (tmp & ~SYSCFG_MCHDLYCR_DFSDM2D6SEL);
+
+  SYSCFG->MCHDLYCR = (source|tmp);
+}
+
+/**
+  * @brief  Configure the distribution of the bitstream clock gated from TIM4_OC 
+  *         for DFSDM1 or TIM3_OC for DFSDM2 
+  * @param source DFSDM1_CLKIN0_TIM4OC2
+  *               DFSDM1_CLKIN2_TIM4OC2
+  *               DFSDM1_CLKIN1_TIM4OC1
+  *               DFSDM1_CLKIN3_TIM4OC1
+  *               DFSDM2_CLKIN0_TIM3OC4
+  *               DFSDM2_CLKIN4_TIM3OC4
+  *               DFSDM2_CLKIN1_TIM3OC3
+  *               DFSDM2_CLKIN5_TIM3OC3
+  *               DFSDM2_CLKIN2_TIM3OC2
+  *               DFSDM2_CLKIN6_TIM3OC2
+  *               DFSDM2_CLKIN3_TIM3OC1
+  *               DFSDM2_CLKIN7_TIM3OC1
+  * @retval None
+  */
+void HAL_DFSDM_BitStreamClkDistribution_Config(uint32_t source)
+{
+  uint32_t tmp = 0U; 
+
+  assert_param(IS_DFSDM_BITSTREM_CLK_DISTRIBUTION(source));
+
+  tmp = SYSCFG->MCHDLYCR;
+
+  if ((source == HAL_DFSDM1_CLKIN0_TIM4OC2) || (source == HAL_DFSDM1_CLKIN2_TIM4OC2))
+  {
+    tmp =  (tmp & ~SYSCFG_MCHDLYCR_DFSDM1CK02SEL);
+  }
+  else if ((source == HAL_DFSDM1_CLKIN1_TIM4OC1) || (source == HAL_DFSDM1_CLKIN3_TIM4OC1))
+  {
+    tmp =  (tmp & ~SYSCFG_MCHDLYCR_DFSDM1CK13SEL);
+  }
+  else   if ((source == HAL_DFSDM2_CLKIN0_TIM3OC4) || (source == HAL_DFSDM2_CLKIN4_TIM3OC4))
+  {
+    tmp =  (tmp & ~SYSCFG_MCHDLYCR_DFSDM2CK04SEL);
+  }
+  else if ((source == HAL_DFSDM2_CLKIN1_TIM3OC3) || (source == HAL_DFSDM2_CLKIN5_TIM3OC3))
+  {
+    tmp =  (tmp & ~SYSCFG_MCHDLYCR_DFSDM2CK15SEL);
+    
+  }else  if ((source == HAL_DFSDM2_CLKIN2_TIM3OC2) || (source == HAL_DFSDM2_CLKIN6_TIM3OC2))
+  {
+    tmp =  (tmp & ~SYSCFG_MCHDLYCR_DFSDM2CK26SEL);
+  }
+  else
+  {
+    tmp =  (tmp & ~SYSCFG_MCHDLYCR_DFSDM2CK37SEL);
+  }
+  
+  if((source == HAL_DFSDM1_CLKIN0_TIM4OC2) ||(source == HAL_DFSDM1_CLKIN1_TIM4OC1)||
+     (source == HAL_DFSDM2_CLKIN0_TIM3OC4) ||(source == HAL_DFSDM2_CLKIN1_TIM3OC3)||
+     (source == HAL_DFSDM2_CLKIN2_TIM3OC2) ||(source == HAL_DFSDM2_CLKIN3_TIM3OC1))
+  {
+    source = 0x0000U;
+  }
+  
+  SYSCFG->MCHDLYCR = (source|tmp);
+}
+
+/**
+  * @brief  Configure multi channel delay block: Use DFSDM2 audio clock source as input 
+  *         clock for DFSDM1 and DFSDM2 filters to Synchronize DFSDMx filters.
+  *         Set the path of the DFSDM2 clock output (dfsdm2_ckout) to the
+  *         DFSDM1/2 CkInx and data inputs channels by configuring following MCHDLY muxes
+  *         or demuxes: M1, M2, M3, M4, M5, M6, M7, M8, DM1, DM2, DM3, DM4, DM5, DM6,
+  *         M9, M10, M11, M12, M13, M14, M15, M16, M17, M18, M19, M20 based on the
+  *         contains of the DFSDM_MultiChannelConfigTypeDef structure  
+  * @param  mchdlystruct Structure of multi channel configuration
+  * @retval None
+  * @note   The SYSCFG clock marco __HAL_RCC_SYSCFG_CLK_ENABLE() must be called 
+  *         before HAL_DFSDM_ConfigMultiChannelDelay()
+  * @note   The HAL_DFSDM_ConfigMultiChannelDelay() function clears the SYSCFG-MCHDLYCR
+  *         register before setting the new configuration.           
+  */
+void HAL_DFSDM_ConfigMultiChannelDelay(DFSDM_MultiChannelConfigTypeDef* mchdlystruct)
+{ 
+  uint32_t mchdlyreg = 0U; 
+  
+  assert_param(IS_DFSDM_DFSDM1_CLKOUT(mchdlystruct->DFSDM1ClockOut));
+  assert_param(IS_DFSDM_DFSDM2_CLKOUT(mchdlystruct->DFSDM2ClockOut));
+  assert_param(IS_DFSDM_DFSDM1_CLKIN(mchdlystruct->DFSDM1ClockIn));
+  assert_param(IS_DFSDM_DFSDM2_CLKIN(mchdlystruct->DFSDM2ClockIn));
+  assert_param(IS_DFSDM_DFSDM1_BIT_CLK((mchdlystruct->DFSDM1BitClkDistribution)));
+  assert_param(IS_DFSDM_DFSDM2_BIT_CLK(mchdlystruct->DFSDM2BitClkDistribution));
+  assert_param(IS_DFSDM_DFSDM1_DATA_DISTRIBUTION(mchdlystruct->DFSDM1DataDistribution));
+  assert_param(IS_DFSDM_DFSDM2_DATA_DISTRIBUTION(mchdlystruct->DFSDM2DataDistribution));
+  
+  mchdlyreg = (SYSCFG->MCHDLYCR & 0x80103U);
+
+  SYSCFG->MCHDLYCR = (mchdlyreg |(mchdlystruct->DFSDM1ClockOut)|(mchdlystruct->DFSDM2ClockOut)|
+                     (mchdlystruct->DFSDM1ClockIn)|(mchdlystruct->DFSDM2ClockIn)|
+                     (mchdlystruct->DFSDM1BitClkDistribution)| (mchdlystruct->DFSDM2BitClkDistribution)|
+                     (mchdlystruct->DFSDM1DataDistribution)| (mchdlystruct->DFSDM2DataDistribution));
+
+}
+#endif /* SYSCFG_MCHDLYCR_BSCKSEL */
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+/* End of exported functions -------------------------------------------------*/
+
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup DFSDM_Private_Functions DFSDM Private Functions
+  * @{
+  */
+
+/**
+  * @brief  DMA half transfer complete callback for regular conversion. 
+  * @param  hdma DMA handle.
+  * @retval None
+  */
+static void DFSDM_DMARegularHalfConvCplt(DMA_HandleTypeDef *hdma)   
+{
+  /* Get DFSDM filter handle */
+  DFSDM_Filter_HandleTypeDef* hdfsdm_filter = (DFSDM_Filter_HandleTypeDef*) ((DMA_HandleTypeDef*)hdma)->Parent;
+
+  /* Call regular half conversion complete callback */
+  HAL_DFSDM_FilterRegConvHalfCpltCallback(hdfsdm_filter);
+}
+
+/**
+  * @brief  DMA transfer complete callback for regular conversion. 
+  * @param  hdma DMA handle.
+  * @retval None
+  */
+static void DFSDM_DMARegularConvCplt(DMA_HandleTypeDef *hdma)   
+{
+  /* Get DFSDM filter handle */
+  DFSDM_Filter_HandleTypeDef* hdfsdm_filter = (DFSDM_Filter_HandleTypeDef*) ((DMA_HandleTypeDef*)hdma)->Parent;
+
+  /* Call regular conversion complete callback */
+  HAL_DFSDM_FilterRegConvCpltCallback(hdfsdm_filter);
+}
+
+/**
+  * @brief  DMA half transfer complete callback for injected conversion. 
+  * @param  hdma DMA handle.
+  * @retval None
+  */
+static void DFSDM_DMAInjectedHalfConvCplt(DMA_HandleTypeDef *hdma)   
+{
+  /* Get DFSDM filter handle */
+  DFSDM_Filter_HandleTypeDef* hdfsdm_filter = (DFSDM_Filter_HandleTypeDef*) ((DMA_HandleTypeDef*)hdma)->Parent;
+
+  /* Call injected half conversion complete callback */
+  HAL_DFSDM_FilterInjConvHalfCpltCallback(hdfsdm_filter);
+}
+
+/**
+  * @brief  DMA transfer complete callback for injected conversion. 
+  * @param  hdma DMA handle.
+  * @retval None
+  */
+static void DFSDM_DMAInjectedConvCplt(DMA_HandleTypeDef *hdma)   
+{
+  /* Get DFSDM filter handle */
+  DFSDM_Filter_HandleTypeDef* hdfsdm_filter = (DFSDM_Filter_HandleTypeDef*) ((DMA_HandleTypeDef*)hdma)->Parent;
+
+  /* Call injected conversion complete callback */
+  HAL_DFSDM_FilterInjConvCpltCallback(hdfsdm_filter);
+}
+
+/**
+  * @brief  DMA error callback. 
+  * @param  hdma DMA handle.
+  * @retval None
+  */
+static void DFSDM_DMAError(DMA_HandleTypeDef *hdma)   
+{
+  /* Get DFSDM filter handle */
+  DFSDM_Filter_HandleTypeDef* hdfsdm_filter = (DFSDM_Filter_HandleTypeDef*) ((DMA_HandleTypeDef*)hdma)->Parent;
+
+  /* Update error code */
+  hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_DMA;
+
+  /* Call error callback */
+  HAL_DFSDM_FilterErrorCallback(hdfsdm_filter);
+}
+
+/**
+  * @brief  This function allows to get the number of injected channels.
+  * @param  Channels bitfield of injected channels.
+  * @retval Number of injected channels.
+  */
+static uint32_t DFSDM_GetInjChannelsNbr(uint32_t Channels)
+{
+  uint32_t nbChannels = 0U;
+  uint32_t tmp;
+  
+  /* Get the number of channels from bitfield */
+  tmp = (uint32_t) (Channels & DFSDM_LSB_MASK);
+  while(tmp != 0U)
+  {
+    if((tmp & 1U) != 0U)
+    {
+      nbChannels++;
+    }
+    tmp = (uint32_t) (tmp >> 1U);
+  }
+  return nbChannels;
+}
+
+/**
+  * @brief  This function allows to get the channel number from channel instance.
+  * @param  Instance DFSDM channel instance.
+  * @retval Channel number.
+  */
+static uint32_t DFSDM_GetChannelFromInstance(DFSDM_Channel_TypeDef* Instance)
+{
+  uint32_t channel = 0xFFU;
+  
+  /* Get channel from instance */
+#if defined(DFSDM2_Channel0)
+  if((Instance == DFSDM1_Channel0) || (Instance == DFSDM2_Channel0))
+  {
+    channel = 0U;
+  }
+  else if((Instance == DFSDM1_Channel1) ||  (Instance == DFSDM2_Channel1))
+  {
+    channel = 1U;
+  }
+  else if((Instance == DFSDM1_Channel2) ||  (Instance == DFSDM2_Channel2))
+  {
+    channel = 2U;
+  }
+  else if((Instance == DFSDM1_Channel3) ||  (Instance == DFSDM2_Channel3))
+  {
+    channel = 3U;
+  }
+  else if(Instance == DFSDM2_Channel4)
+  {
+    channel = 4U;
+  }
+  else if(Instance == DFSDM2_Channel5)
+  {
+    channel = 5U;
+  }
+  else if(Instance == DFSDM2_Channel6)
+  {
+    channel = 6U;
+  }
+  else if(Instance == DFSDM2_Channel7)
+  {
+    channel = 7U;
+  }
+#else
+  if(Instance == DFSDM1_Channel0)
+  {
+    channel = 0U;
+  }
+  else if(Instance == DFSDM1_Channel1)
+  {
+    channel = 1U;
+  }
+  else if(Instance == DFSDM1_Channel2)
+  {
+    channel = 2U;
+  }
+  else if(Instance == DFSDM1_Channel3)
+  {
+    channel = 3U;
+  }
+#endif /* defined(DFSDM2_Channel0) */
+
+  return channel;
+}
+
+/**
+  * @brief  This function allows to really start regular conversion.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval None
+  */
+static void DFSDM_RegConvStart(DFSDM_Filter_HandleTypeDef* hdfsdm_filter)
+{
+  /* Check regular trigger */
+  if(hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER)
+  {
+    /* Software start of regular conversion */
+    hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_RSWSTART;
+  }
+  else /* synchronous trigger */
+  {
+    /* Disable DFSDM filter */
+    hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN);
+    
+    /* Set RSYNC bit in DFSDM_FLTCR1 register */
+    hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_RSYNC;
+
+    /* Enable DFSDM  filter */
+    hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_DFEN;
+    
+    /* If injected conversion was in progress, restart it */
+    if(hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ)
+    {
+      if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER)
+      {
+        hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JSWSTART;
+      }
+      /* Update remaining injected conversions */
+      hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \
+                                         hdfsdm_filter->InjectedChannelsNbr : 1U;
+    }
+  }
+  /* Update DFSDM filter state */
+  hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) ? \
+                          HAL_DFSDM_FILTER_STATE_REG : HAL_DFSDM_FILTER_STATE_REG_INJ;
+}
+
+/**
+  * @brief  This function allows to really stop regular conversion.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval None
+  */
+static void DFSDM_RegConvStop(DFSDM_Filter_HandleTypeDef* hdfsdm_filter)
+{
+  /* Disable DFSDM filter */
+  hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN);
+
+  /* If regular trigger was synchronous, reset RSYNC bit in DFSDM_FLTCR1 register */
+  if(hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SYNC_TRIGGER)
+  {
+    hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_RSYNC);
+  }
+
+  /* Enable DFSDM filter */
+  hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_DFEN;
+  
+  /* If injected conversion was in progress, restart it */
+  if(hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG_INJ)
+  {
+    if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER)
+    {
+      hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JSWSTART;
+    }
+    /* Update remaining injected conversions */
+    hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \
+                                       hdfsdm_filter->InjectedChannelsNbr : 1U;
+  }
+  
+  /* Update DFSDM filter state */
+  hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG) ? \
+                          HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_INJ;
+}
+
+/**
+  * @brief  This function allows to really start injected conversion.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval None
+  */
+static void DFSDM_InjConvStart(DFSDM_Filter_HandleTypeDef* hdfsdm_filter)
+{
+  /* Check injected trigger */
+  if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER)
+  {
+    /* Software start of injected conversion */
+    hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JSWSTART;
+  }
+  else /* external or synchronous trigger */
+  {
+    /* Disable DFSDM filter */
+    hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN);
+      
+    if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SYNC_TRIGGER)
+    {
+      /* Set JSYNC bit in DFSDM_FLTCR1 register */
+      hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JSYNC;
+    }
+    else /* external trigger */
+    {
+      /* Set JEXTEN[1:0] bits in DFSDM_FLTCR1 register */
+      hdfsdm_filter->Instance->FLTCR1 |= hdfsdm_filter->ExtTriggerEdge;
+    }
+    
+    /* Enable DFSDM filter */
+    hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_DFEN;
+
+    /* If regular conversion was in progress, restart it */
+    if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG) && \
+       (hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER))
+    {
+      hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_RSWSTART;
+    }
+  }
+  /* Update DFSDM filter state */
+  hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) ? \
+                         HAL_DFSDM_FILTER_STATE_INJ : HAL_DFSDM_FILTER_STATE_REG_INJ;
+}
+
+/**
+  * @brief  This function allows to really stop injected conversion.
+  * @param  hdfsdm_filter DFSDM filter handle.
+  * @retval None
+  */
+static void DFSDM_InjConvStop(DFSDM_Filter_HandleTypeDef* hdfsdm_filter)
+{
+  /* Disable DFSDM filter */
+  hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN);
+
+  /* If injected trigger was synchronous, reset JSYNC bit in DFSDM_FLTCR1 register */
+  if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SYNC_TRIGGER)
+  {
+    hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_JSYNC);
+  }
+  else if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_EXT_TRIGGER)
+  {
+    /* Reset JEXTEN[1:0] bits in DFSDM_FLTCR1 register */
+    hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_JEXTEN);
+  }
+
+  /* Enable DFSDM filter */
+  hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_DFEN;
+  
+  /* If regular conversion was in progress, restart it */
+  if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG_INJ) && \
+     (hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER))
+  {
+    hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_RSWSTART;
+  }
+
+  /* Update remaining injected conversions */
+  hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \
+                                     hdfsdm_filter->InjectedChannelsNbr : 1U;
+
+  /* Update DFSDM filter state */
+  hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ) ? \
+                          HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_REG;
+}
+/**
+  * @}
+  */
+/* End of private functions --------------------------------------------------*/
+
+/**
+  * @}
+  */
+#endif /* STM32F412Zx || STM32F412Vx || STM32F412Rx || STM32F412Cx || STM32F413xx || STM32F423xx */
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/