Mercurial > public > ostc4
annotate Discovery/Src/t5_gauge.c @ 396:effa6fb9eb89 ImproveBluetooth
Added function for BlueMod configuration:
Investigations of connection problems showed that there is a problem if the module is not able to forward data fast enough. The bottleneck in direction of microcontroller may be solved by increasing baud rate. To be backward (bootloader) compatible this is done temperoraly during every startup
Added function for signal stregth evaluation:
Quality of data connection may have an impact on stability => added function to visualize current state of connection. The evaluation may be requested remote using 'l' (0x6c) or by pressing next button while in service mode
Cleanup Disconnection procedure:
Disconnection issued by OSTC was realized by simply switching of the module which might have a negativ impact to remote devices. Second reason for change was that, e.g. in case of a timeout on OSTC side. a remote device might have continued sending firmware data causing OSTC to interpretate firmware image as service requests. E.g. resulting in a corrupted configuration. Instead of just switching off power a disconnection request is now send to the BlueMod.
Decreased size used for large data receiption:
Depending on device speed firmware transfer might be really slow. By decreasing the block size a short (6 seconds) timeout per block may be kept while the sender has more time for transfering the image
author | ideenmodellierer |
---|---|
date | Tue, 26 Nov 2019 22:12:25 +0100 |
parents | 39c147e47c1c |
children | 65c7b009136f |
rev | line source |
---|---|
38 | 1 /////////////////////////////////////////////////////////////////////////////// |
2 /// -*- coding: UTF-8 -*- | |
3 /// | |
4 /// \file Discovery/Src/t5_gauge.c | |
5 /// \brief dive screen for Gauge mode | |
6 /// \author Heinrichs Weikamp gmbh | |
7 /// \date 1-Feb-2017 | |
8 /// | |
9 /// \details | |
10 /// | |
11 /// $Id$ | |
12 /////////////////////////////////////////////////////////////////////////////// | |
13 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh | |
14 /// | |
15 /// This program is free software: you can redistribute it and/or modify | |
16 /// it under the terms of the GNU General Public License as published by | |
17 /// the Free Software Foundation, either version 3 of the License, or | |
18 /// (at your option) any later version. | |
19 /// | |
20 /// This program is distributed in the hope that it will be useful, | |
21 /// but WITHOUT ANY WARRANTY; without even the implied warranty of | |
22 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
23 /// GNU General Public License for more details. | |
24 /// | |
25 /// You should have received a copy of the GNU General Public License | |
26 /// along with this program. If not, see <http://www.gnu.org/licenses/>. | |
27 ////////////////////////////////////////////////////////////////////////////// | |
28 | |
29 /* Includes ------------------------------------------------------------------*/ | |
30 #include "t5_gauge.h" | |
31 | |
32 #include "data_exchange_main.h" | |
33 #include "decom.h" | |
34 #include "gfx_fonts.h" | |
35 #include "math.h" | |
36 #include "tHome.h" | |
37 #include "simulation.h" | |
38 #include "timer.h" | |
39 #include "unit.h" | |
40 | |
41 | |
42 /* Private variables ---------------------------------------------------------*/ | |
43 GFX_DrawCfgScreen t5screen; | |
44 GFX_DrawCfgWindow t5l1; | |
45 GFX_DrawCfgWindow t5r1; | |
46 GFX_DrawCfgWindow t5c1; | |
47 GFX_DrawCfgWindow t5c2; | |
48 GFX_DrawCfgWindow t5c3; // for menu text | |
49 | |
50 uint8_t t5_selection_customview = 0; | |
51 | |
52 /* Importend function prototypes ---------------------------------------------*/ | |
53 //extern uint8_t write_gas(char *text, uint8_t oxygen, uint8_t helium); | |
54 | |
55 /* Private types -------------------------------------------------------------*/ | |
56 | |
57 #define CUSTOMBOX_LINE_LEFT (250) | |
58 #define CUSTOMBOX_LINE_RIGHT (549) | |
59 #define CUSTOMBOX_INSIDE_OFFSET (2) | |
60 #define CUSTOMBOX_OUTSIDE_OFFSET (2) | |
61 | |
62 #define TEXTSIZE 16 | |
63 | |
64 const uint8_t t5_customviewsStandard[] = | |
65 { | |
66 CVIEW_sensors, | |
67 CVIEW_Compass, | |
68 CVIEW_T3_MaxDepth, | |
69 CVIEW_T3_StopWatch, | |
70 CVIEW_T3_Temperature, | |
71 CVIEW_T3_GasList, | |
72 CVIEW_T3_Decostop, | |
73 CVIEW_T3_END | |
74 }; | |
75 | |
76 | |
77 const uint8_t *t5_customviews = t5_customviewsStandard; | |
78 | |
79 /* Private function prototypes -----------------------------------------------*/ | |
80 void t5_refresh_divemode(void); | |
81 void t5_refresh_customview(float depth); | |
82 | |
83 uint8_t t5_test_customview_warnings(void); | |
84 //void t5_show_customview_warnings(void); | |
85 //void t5_compass(uint16_t ActualHeading, uint16_t UserSetHeading); | |
86 | |
87 /* Exported functions --------------------------------------------------------*/ | |
88 | |
89 // for tHomeDiveMenuControl() in tHome.c | |
90 uint8_t t5_getCustomView(void) | |
91 { | |
92 return t5_selection_customview; | |
93 } | |
94 | |
95 | |
96 void t5_init(void) | |
97 { | |
98 t5_selection_customview = t5_customviewsStandard[0]; | |
99 | |
100 t5screen.FBStartAdress = 0; | |
101 t5screen.ImageHeight = 480; | |
102 t5screen.ImageWidth = 800; | |
103 t5screen.LayerIndex = 1; | |
104 | |
105 t5l1.Image = &t5screen; | |
106 t5l1.WindowNumberOfTextLines = 2; | |
107 t5l1.WindowLineSpacing = 19; // Abstand von Y0 | |
108 t5l1.WindowTab = 100; | |
109 t5l1.WindowX0 = 0; | |
110 t5l1.WindowX1 = BigFontSeperationLeftRight - 5; | |
111 t5l1.WindowY0 = BigFontSeperationTopBottom + 5; | |
112 t5l1.WindowY1 = 479; | |
113 | |
114 t5r1.Image = &t5screen; | |
115 t5r1.WindowNumberOfTextLines = t5l1.WindowNumberOfTextLines; | |
116 t5r1.WindowLineSpacing = t5l1.WindowLineSpacing; | |
117 t5r1.WindowTab = t5l1.WindowTab; | |
118 t5r1.WindowX0 = BigFontSeperationLeftRight + 5; | |
119 t5r1.WindowX1 = 799; | |
120 t5r1.WindowY0 = t5l1.WindowY0; | |
121 t5r1.WindowY1 = t5l1.WindowY1; | |
122 | |
123 t5c1.Image = &t5screen; | |
124 t5c1.WindowNumberOfTextLines = 2; | |
125 t5c1.WindowLineSpacing = t5l1.WindowLineSpacing; | |
126 t5c1.WindowX0 = 0; | |
127 t5c1.WindowX1 = 799; | |
128 t5c1.WindowY0 = 0; | |
129 t5c1.WindowY1 = BigFontSeperationTopBottom - 5; | |
130 | |
131 t5c2.Image = &t5screen; | |
132 t5c2.WindowNumberOfTextLines = 3; | |
133 t5c2.WindowLineSpacing = 58; | |
134 t5c2.WindowX0 = 370; | |
135 t5c2.WindowX1 = 799; | |
136 t5c2.WindowY0 = 0; | |
137 t5c2.WindowY1 = BigFontSeperationTopBottom - 5; | |
138 t5c2.WindowTab = 600; | |
139 | |
140 t5c3.Image = &t5screen; | |
141 t5c3.WindowNumberOfTextLines = 1; | |
142 t5c3.WindowLineSpacing = 0; // Abstand von Y0 | |
143 t5c3.WindowTab = 100; | |
144 t5c3.WindowX0 = CUSTOMBOX_LINE_LEFT + CUSTOMBOX_INSIDE_OFFSET; | |
145 t5c3.WindowX1 = CUSTOMBOX_LINE_RIGHT - CUSTOMBOX_INSIDE_OFFSET; | |
146 t5c3.WindowY0 = 0; | |
147 t5c3.WindowY1 = 69; | |
148 } | |
149 | |
150 | |
151 void t5_refresh(void) | |
152 { | |
153 static uint8_t last_mode = MODE_SURFACE; | |
154 | |
155 SStateList status; | |
156 get_globalStateList(&status); | |
157 | |
158 if(stateUsed->mode != MODE_DIVE) | |
159 { | |
160 last_mode = MODE_SURFACE; | |
161 settingsGetPointer()->design = 7; | |
162 if(t5screen.FBStartAdress) | |
163 { | |
164 releaseFrame(24,t5screen.FBStartAdress); | |
165 t5screen.FBStartAdress = 0; | |
166 } | |
167 return; | |
168 } | |
169 | |
170 if(status.base != BaseHome) | |
171 return; | |
172 | |
173 t5screen.FBStartAdress = getFrame(24); | |
174 | |
175 if(last_mode != MODE_DIVE) | |
176 { | |
177 last_mode = MODE_DIVE; | |
178 t5_selection_customview = *t5_customviews; | |
179 } | |
180 | |
181 if(status.page == PageSurface) | |
182 set_globalState(StD); | |
183 | |
184 t5_refresh_divemode(); | |
166
255eedad4155
cleanup: get rid of some compile warnings
Jan Mulder <jlmulder@xs4all.nl>
parents:
138
diff
changeset
|
185 GFX_SetFramesTopBottom(t5screen.FBStartAdress, 0,480); |
38 | 186 releaseAllFramesExcept(24,t5screen.FBStartAdress); |
187 } | |
188 | |
189 | |
190 /* Private functions ---------------------------------------------------------*/ | |
191 | |
192 void t5_refresh_divemode(void) | |
193 { | |
194 char text[512]; | |
195 uint8_t customview_warnings = 0; | |
196 float depth_meter = 0.0; | |
197 | |
198 // everything like lines, depth, ascent graph and divetime | |
199 depth_meter = t3_basics_lines_depth_and_divetime(&t5screen, &t5l1, &t5r1, DIVEMODE_Gauge); | |
200 | |
201 // customview | |
202 if(stateUsed->warnings.numWarnings) | |
203 customview_warnings = t5_test_customview_warnings(); | |
204 | |
205 if(customview_warnings && warning_count_high_time) | |
206 t3_basics_show_customview_warnings(&t5c1); | |
207 else | |
208 t5_refresh_customview(depth_meter); | |
209 | |
210 if(stateUsed->warnings.lowBattery) | |
211 t3_basics_battery_low_customview_extra(&t5c1); | |
212 | |
213 | |
214 /* Menu Selection (and gas mix) */ | |
215 if(get_globalState() == StDBEAR) | |
216 { | |
217 snprintf(text,TEXTSIZE,"\a\001%c%c", TXT_2BYTE, TXT2BYTE_DiveBearingQ); | |
218 GFX_write_string_color(&FontT48,&t5c3,text,0,CLUT_WarningYellow); | |
219 } | |
220 else | |
221 if(get_globalState() == StDRAVG) | |
222 { | |
223 snprintf(text,TEXTSIZE,"\a\001%c%c", TXT_2BYTE, TXT2BYTE_DiveResetAvgQ); | |
224 GFX_write_string_color(&FontT48,&t5c3,text,0,CLUT_WarningYellow); | |
225 } | |
226 // else | |
227 // if(get_globalState() == StDMENU) | |
228 // { | |
229 // snprintf(text,TEXTSIZE,"\a\001%c%c", TXT_2BYTE, TXT2BYTE_DiveMenuQ); | |
230 // GFX_write_string_color(&FontT48,&t5c3,text,0,CLUT_WarningYellow); | |
231 // } | |
232 else | |
233 if(get_globalState() == StDSIM1) | |
234 { | |
235 snprintf(text,TEXTSIZE,"\a\001%c%c", TXT_2BYTE, TXT2BYTE_DiveQuitQ); | |
236 GFX_write_string_color(&FontT48,&t5c3,text,0,CLUT_WarningYellow); | |
237 } | |
238 else | |
239 if(get_globalState() == StDSIM2) | |
240 { | |
241 if(settingsGetPointer()->nonMetricalSystem) | |
242 snprintf(text,TEXTSIZE,"\a\001" " Sim:-3.33ft "); | |
243 else | |
244 snprintf(text,TEXTSIZE,"\a\001" " Sim:-1m "); | |
245 GFX_write_string_color(&FontT48,&t5c3,text,0,CLUT_WarningYellow); | |
246 snprintf(text,TEXTSIZE,"\a\f %u %c%c" | |
247 , unit_depth_integer(simulation_get_aim_depth()) | |
248 , unit_depth_char1() | |
249 , unit_depth_char2() | |
250 ); | |
251 GFX_write_string_color(&FontT42,&t5l1,text,0,CLUT_WarningYellow); | |
252 | |
253 } | |
254 else | |
255 if(get_globalState() == StDSIM3) | |
256 { | |
257 if(settingsGetPointer()->nonMetricalSystem) | |
258 snprintf(text,TEXTSIZE,"\a\001" " Sim:+3.33ft "); | |
259 else | |
260 snprintf(text,TEXTSIZE,"\a\001" " Sim:+1m "); | |
261 GFX_write_string_color(&FontT48,&t5c3,text,0,CLUT_WarningYellow); | |
262 snprintf(text,TEXTSIZE,"\a\f %u %c%c" | |
263 , unit_depth_integer(simulation_get_aim_depth()) | |
264 , unit_depth_char1() | |
265 , unit_depth_char2() | |
266 ); | |
267 GFX_write_string_color(&FontT42,&t5l1,text,0,CLUT_WarningYellow); | |
268 } | |
269 else | |
270 if(get_globalState() == StDSIM4) | |
271 { | |
272 snprintf(text,TEXTSIZE,"\a\001" " Sim:+5' "); | |
273 GFX_write_string_color(&FontT48,&t5c3,text,0,CLUT_WarningYellow); | |
274 snprintf(text,TEXTSIZE,"\a\f %u %c%c" | |
275 , unit_depth_integer(simulation_get_aim_depth()) | |
276 , unit_depth_char1() | |
277 , unit_depth_char2() | |
278 ); | |
279 GFX_write_string_color(&FontT42,&t5l1,text,0,CLUT_WarningYellow); | |
280 } | |
281 else | |
282 { | |
283 // keep empty | |
284 } | |
285 } | |
286 | |
287 | |
386
39c147e47c1c
Added key direction awarness to t3, t5 and t6 views:
ideenmodellierer
parents:
175
diff
changeset
|
288 void t5_change_customview(uint8_t action) |
38 | 289 { |
386
39c147e47c1c
Added key direction awarness to t3, t5 and t6 views:
ideenmodellierer
parents:
175
diff
changeset
|
290 t3_basics_change_customview(&t5_selection_customview, t5_customviews, action); |
38 | 291 } |
292 | |
293 | |
294 void t5_refresh_customview(float depth) | |
295 { | |
386
39c147e47c1c
Added key direction awarness to t3, t5 and t6 views:
ideenmodellierer
parents:
175
diff
changeset
|
296 // if((t5_selection_customview == CVIEW_sensors) &&(stateUsed->diveSettings.ccrOption == 0)) |
39c147e47c1c
Added key direction awarness to t3, t5 and t6 views:
ideenmodellierer
parents:
175
diff
changeset
|
297 // t5_change_customview(); |
38 | 298 |
299 t3_basics_refresh_customview(depth, t5_selection_customview, &t5screen, &t5c1, &t5c2, DIVEMODE_Gauge); | |
300 } | |
301 | |
302 | |
303 uint8_t t5_test_customview_warnings(void) | |
304 { | |
305 uint8_t count = 0; | |
306 | |
307 count = 0; | |
308 return count; | |
309 } | |
310 | |
311 |