Mercurial > public > ostc4
annotate Discovery/Src/settings.c @ 396:effa6fb9eb89 ImproveBluetooth
Added function for BlueMod configuration:
Investigations of connection problems showed that there is a problem if the module is not able to forward data fast enough. The bottleneck in direction of microcontroller may be solved by increasing baud rate. To be backward (bootloader) compatible this is done temperoraly during every startup
Added function for signal stregth evaluation:
Quality of data connection may have an impact on stability => added function to visualize current state of connection. The evaluation may be requested remote using 'l' (0x6c) or by pressing next button while in service mode
Cleanup Disconnection procedure:
Disconnection issued by OSTC was realized by simply switching of the module which might have a negativ impact to remote devices. Second reason for change was that, e.g. in case of a timeout on OSTC side. a remote device might have continued sending firmware data causing OSTC to interpretate firmware image as service requests. E.g. resulting in a corrupted configuration. Instead of just switching off power a disconnection request is now send to the BlueMod.
Decreased size used for large data receiption:
Depending on device speed firmware transfer might be really slow. By decreasing the block size a short (6 seconds) timeout per block may be kept while the sender has more time for transfering the image
| author | ideenmodellierer |
|---|---|
| date | Tue, 26 Nov 2019 22:12:25 +0100 |
| parents | 14fd5f35cb50 |
| children | ebc2b571a0b9 |
| rev | line source |
|---|---|
| 38 | 1 /////////////////////////////////////////////////////////////////////////////// |
| 2 /// -*- coding: UTF-8 -*- | |
| 3 /// | |
| 4 /// \file Discovery/Src/settings.c | |
| 5 /// \brief settingsHelperButtonSens_translate_hwOS_values_to_percentage. | |
| 6 /// \author Heinrichs Weikamp gmbh | |
| 7 /// \date 6-March-2017 | |
| 8 /// | |
| 9 /// \details | |
| 10 /// | |
| 11 /// $Id$ | |
| 12 /////////////////////////////////////////////////////////////////////////////// | |
| 13 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh | |
| 14 /// | |
| 15 /// This program is free software: you can redistribute it and/or modify | |
| 16 /// it under the terms of the GNU General Public License as published by | |
| 17 /// the Free Software Foundation, either version 3 of the License, or | |
| 18 /// (at your option) any later version. | |
| 19 /// | |
| 20 /// This program is distributed in the hope that it will be useful, | |
| 21 /// but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 22 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 23 /// GNU General Public License for more details. | |
| 24 /// | |
| 25 /// You should have received a copy of the GNU General Public License | |
| 26 /// along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 27 ////////////////////////////////////////////////////////////////////////////// | |
| 28 | |
| 29 #include <string.h> | |
| 30 #include "settings.h" | |
| 31 #include "firmwareEraseProgram.h" // for HARDWAREDATA_ADDRESS | |
| 32 #include "externLogbookFlash.h" // for SAMPLESTART and SAMPLESTOP | |
| 33 #include "text_multilanguage.h" // for LANGUAGE_END | |
| 34 #include "tHome.h" // for CVIEW_END | |
|
375
4bb5ceebfaf9
Use Enum values for initialization and setting check:
ideenmodellierer
parents:
372
diff
changeset
|
35 #include "Motion.h" |
| 38 | 36 |
| 37 SSettings Settings; | |
| 38 | |
| 39 const uint8_t RTErequiredHigh = 1; | |
|
324
d4d8d717e9a7
increase RTE to 1.9 and Firmware to 1.4.9 beta
heinrichsweikamp
parents:
319
diff
changeset
|
40 const uint8_t RTErequiredLow = 9; |
| 38 | 41 |
| 75 | 42 const uint8_t FONTrequiredHigh = 1; |
| 43 const uint8_t FONTrequiredLow = 0; | |
| 38 | 44 |
| 45 uint8_t RTEactualHigh = 0; | |
| 46 uint8_t RTEactualLow = 0; | |
| 47 | |
| 48 // =============================================================================== | |
| 49 // SFirmwareData FirmwareData | |
| 50 /// @brief internal counter is for changes after last release | |
| 51 /// use date and info as well for this purpose | |
| 52 /// | |
| 53 // =============================================================================== | |
| 54 | |
| 55 const SFirmwareData firmware_FirmwareData __attribute__( (section(".firmware_firmware_data")) ) = | |
| 56 { | |
| 57 .versionFirst = 1, | |
| 334 | 58 .versionSecond = 5, |
|
341
591c03a1e68d
change max. allowed surface pressure to 1030hPa (As in the small OSTC)
heinrichsweikamp
parents:
337
diff
changeset
|
59 .versionThird = 1, |
| 334 | 60 .versionBeta = 0, |
| 38 | 61 |
| 62 /* 4 bytes with trailing 0 */ | |
|
55
a7683f9765da
Italian activated (needs some fine tuning), special characters (?,?,?,?,? and others) currently not working...
heinrichsweikamp
parents:
48
diff
changeset
|
63 .signature = "mh", |
| 38 | 64 |
|
172
c659fda83e44
Minor: Button defaults, release date adjusted, use SPI_SHOW_SYNC_STATS
heinrichsweikamp
parents:
151
diff
changeset
|
65 .release_year = 19, |
|
341
591c03a1e68d
change max. allowed surface pressure to 1030hPa (As in the small OSTC)
heinrichsweikamp
parents:
337
diff
changeset
|
66 .release_month = 10, |
|
591c03a1e68d
change max. allowed surface pressure to 1030hPa (As in the small OSTC)
heinrichsweikamp
parents:
337
diff
changeset
|
67 .release_day = 6, |
| 38 | 68 .release_sub = 0, |
| 69 | |
| 70 /* max 48 with trailing 0 */ | |
| 71 //release_info ="12345678901234567890123456789012345678901" | |
|
286
733877ab87d9
Minor: Some Texts fixed, allign RTErequired* values with RTE firmware
heinrichsweikamp
parents:
274
diff
changeset
|
72 .release_info ="gcc_2nd", |
| 38 | 73 |
| 74 /* for safety reasons and coming functions */ | |
| 75 .magic[0] = FIRMWARE_MAGIC_FIRST, | |
| 76 .magic[1] = FIRMWARE_MAGIC_SECOND, | |
| 77 .magic[2] = FIRMWARE_MAGIC_FIRMWARE, /* the magic byte */ | |
| 78 .magic[3] = FIRMWARE_MAGIC_END | |
| 79 }; | |
| 80 | |
| 81 | |
| 82 /* always adjust check_and_correct_settings() accordingly | |
| 83 * There might even be entries with fixed values that have no range | |
| 84 */ | |
| 85 const SSettings SettingsStandard = { | |
|
368
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
324
diff
changeset
|
86 .header = 0xFFFF001A, |
| 38 | 87 .warning_blink_dsec = 8 * 2, |
| 88 .lastDiveLogId = 0, | |
| 89 .logFlashNextSampleStartAddress = 0, | |
| 90 | |
| 91 .gas[0].oxygen_percentage = 21, | |
| 92 .gas[1].oxygen_percentage = 21, | |
| 93 .gas[2].oxygen_percentage = 21, | |
| 94 .gas[3].oxygen_percentage = 21, | |
| 95 .gas[4].oxygen_percentage = 21, | |
| 96 .gas[5].oxygen_percentage = 21, | |
| 97 .gas[6].oxygen_percentage = 21, | |
| 98 .gas[7].oxygen_percentage = 21, | |
| 99 .gas[8].oxygen_percentage = 21, | |
| 100 .gas[9].oxygen_percentage = 21, | |
| 101 .gas[10].oxygen_percentage = 21, | |
| 102 .gas[0].helium_percentage = 0, | |
| 103 .gas[1].helium_percentage = 0, | |
| 104 .gas[2].helium_percentage = 0, | |
| 105 .gas[3].helium_percentage = 0, | |
| 106 .gas[4].helium_percentage = 0, | |
| 107 .gas[5].helium_percentage = 0, | |
| 108 .gas[6].helium_percentage = 0, | |
| 109 .gas[7].helium_percentage = 0, | |
| 110 .gas[8].helium_percentage = 0, | |
| 111 .gas[9].helium_percentage = 0, | |
| 112 .gas[10].helium_percentage = 0, | |
| 113 .gas[0].depth_meter = 0, | |
| 114 .gas[1].depth_meter = 0, | |
| 115 .gas[2].depth_meter = 0, | |
| 116 .gas[3].depth_meter = 0, | |
| 117 .gas[4].depth_meter = 0, | |
| 118 .gas[5].depth_meter = 0, | |
| 119 .gas[6].depth_meter = 0, | |
| 120 .gas[7].depth_meter = 0, | |
| 121 .gas[8].depth_meter = 0, | |
| 122 .gas[9].depth_meter = 0, | |
| 123 .gas[10].depth_meter = 0, | |
| 124 .gas[0].depth_meter_travel = 0, | |
| 125 .gas[1].depth_meter_travel = 0, | |
| 126 .gas[2].depth_meter_travel = 0, | |
| 127 .gas[3].depth_meter_travel = 0, | |
| 128 .gas[4].depth_meter_travel = 0, | |
| 129 .gas[5].depth_meter_travel = 0, | |
| 130 .gas[6].depth_meter_travel = 0, | |
| 131 .gas[7].depth_meter_travel = 0, | |
| 132 .gas[8].depth_meter_travel = 0, | |
| 133 .gas[9].depth_meter_travel = 0, | |
| 134 .gas[10].depth_meter_travel = 0, | |
| 135 .gas[0].note.uw = 0, | |
| 136 .gas[1].note.ub.first = 1, | |
| 137 .gas[1].note.ub.active = 1, | |
| 138 .gas[1].note.ub.deco = 0, | |
| 139 .gas[1].note.ub.travel = 0, | |
| 140 .gas[2].note.uw = 0, | |
| 141 .gas[3].note.uw = 0, | |
| 142 .gas[4].note.uw = 0, | |
| 143 .gas[5].note.uw = 0, | |
| 144 .gas[6].note.ub.first = 1, | |
| 145 .gas[6].note.ub.active = 1, | |
| 146 .gas[6].note.ub.deco = 0, | |
| 147 .gas[6].note.ub.travel = 0, | |
| 148 .gas[7].note.uw = 0, | |
| 149 .gas[8].note.uw = 0, | |
| 150 .gas[9].note.uw = 0, | |
| 151 .gas[10].note.uw = 0, | |
| 152 .gas[0].bottle_size_liter = 0, | |
| 153 .gas[1].bottle_size_liter = 0, | |
| 154 .gas[2].bottle_size_liter = 0, | |
| 155 .gas[3].bottle_size_liter = 0, | |
| 156 .gas[4].bottle_size_liter = 0, | |
| 157 .gas[5].bottle_size_liter = 0, | |
| 158 .gas[6].bottle_size_liter = 0, | |
| 159 .gas[7].bottle_size_liter = 0, | |
| 160 .gas[8].bottle_size_liter = 0, | |
| 161 .gas[9].bottle_size_liter = 0, | |
| 162 .gas[10].bottle_size_liter = 0, | |
| 163 /* | |
| 164 .gas[0].bottle_wireless_status = 0, | |
| 165 .gas[1].bottle_wireless_status = 0, | |
| 166 .gas[2].bottle_wireless_status = 0, | |
| 167 .gas[3].bottle_wireless_status = 0, | |
| 168 .gas[4].bottle_wireless_status = 0, | |
| 169 .gas[5].bottle_wireless_status = 0, | |
| 170 .gas[6].bottle_wireless_status = 0, | |
| 171 .gas[7].bottle_wireless_status = 0, | |
| 172 .gas[8].bottle_wireless_status = 0, | |
| 173 .gas[9].bottle_wireless_status = 0, | |
| 174 .gas[10].bottle_wireless_status = 0, | |
| 175 */ | |
| 176 .gas[0].bottle_wireless_id = 0, | |
| 177 .gas[1].bottle_wireless_id = 0, | |
| 178 .gas[2].bottle_wireless_id = 0, | |
| 179 .gas[3].bottle_wireless_id = 0, | |
| 180 .gas[4].bottle_wireless_id = 0, | |
| 181 .gas[5].bottle_wireless_id = 0, | |
| 182 .gas[6].bottle_wireless_id = 0, | |
| 183 .gas[7].bottle_wireless_id = 0, | |
| 184 .gas[8].bottle_wireless_id = 0, | |
| 185 .gas[9].bottle_wireless_id = 0, | |
| 186 .gas[10].bottle_wireless_id = 0, | |
| 187 .setpoint[0].setpoint_cbar = 100, | |
| 188 .setpoint[1].setpoint_cbar = 70, | |
| 189 .setpoint[2].setpoint_cbar = 90, | |
| 190 .setpoint[3].setpoint_cbar = 100, | |
| 191 .setpoint[4].setpoint_cbar = 120, | |
| 192 .setpoint[5].setpoint_cbar = 140, | |
| 193 .setpoint[0].depth_meter = 0, | |
| 194 .setpoint[1].depth_meter = 0, | |
| 195 .setpoint[2].depth_meter = 0, | |
| 196 .setpoint[3].depth_meter = 0, | |
| 197 .setpoint[4].depth_meter = 0, | |
| 198 .setpoint[5].depth_meter = 0, | |
| 199 .setpoint[0].note.uw = 0, | |
| 200 .setpoint[1].note.ub.active = 1, | |
| 201 .setpoint[1].note.ub.first = 1, | |
| 202 .setpoint[2].note.ub.active = 1, | |
| 203 .setpoint[2].note.ub.first = 0, | |
| 204 .setpoint[3].note.ub.active = 1, | |
| 205 .setpoint[3].note.ub.first = 0, | |
| 206 .setpoint[4].note.ub.active = 1, | |
| 207 .setpoint[4].note.ub.first = 0, | |
| 208 .setpoint[5].note.ub.active = 1, | |
| 209 .setpoint[5].note.ub.first = 0, | |
| 210 | |
| 211 .CCR_Mode = CCRMODE_Sensors, | |
| 212 .dive_mode = DIVEMODE_OC, | |
| 213 .deco_type.ub.standard = GF_MODE, | |
| 214 .deco_type.ub.alternative = GF_MODE, | |
| 215 .ppO2_max_deco = 160, | |
| 216 .ppO2_max_std = 140, | |
| 217 .ppO2_min = 15, | |
| 218 .CNS_max = 90, | |
| 219 .ascent_MeterPerMinute_max = 30, | |
| 220 .ascent_MeterPerMinute_showGraph = 7, | |
| 221 .future_TTS = 5, | |
| 222 .GF_high = 85, | |
| 223 .GF_low = 30, | |
| 224 .aGF_high = 95, | |
| 225 .aGF_low = 95, | |
| 226 .VPM_conservatism.ub.standard = 2, | |
| 227 .VPM_conservatism.ub.alternative = 0, | |
| 228 .safetystopDuration = 1, | |
| 229 .AtemMinutenVolumenLiter = 25, | |
| 230 .ReserveFractionDenominator = 4, | |
| 231 .salinity = 0, | |
| 232 .last_stop_depth_meter = 3, | |
| 233 .stop_increment_depth_meter = 3, | |
| 234 .brightness = 1, | |
| 235 .date_format = DDMMYY, | |
| 236 .selected_language = 0, /* 0 = LANGUAGE_English */ | |
| 237 .customtext = " <your name>\n" " <address>", | |
| 238 .timeoutSurfacemode = 120, | |
| 239 .timeoutMenuSurface = 120,//240, | |
| 240 .timeoutMenuDive = 120,//20, | |
| 241 .timeoutMenuEdit = 120,//40, | |
| 242 .timeoutInfo = 120,//60, | |
| 243 .timeoutInfoCompass = 60, | |
| 244 .design = 7, | |
| 245 .timeoutDiveReachedZeroDepth = 300, | |
| 246 .divetimeToCreateLogbook = 60, | |
| 247 .serialHigh = 0, | |
| 248 .serialLow = 2, | |
| 249 /* | |
| 250 .firmwareVersion16to32bit.ub.first = 0, | |
| 251 .firmwareVersion16to32bit.ub.second = 6, | |
| 252 .firmwareVersion16to32bit.ub.third = 0, | |
| 253 .firmwareVersion16to32bit.ub.betaFlag = 0, | |
| 254 */ | |
| 255 .backup_localtime_rtc_tr = 0, | |
| 256 .backup_localtime_rtc_dr = 0, | |
| 257 .totalDiveCounter = 0, | |
| 258 .personalDiveCount = 0, | |
| 259 .showDebugInfo = 0, | |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
260 .ButtonResponsiveness[0] = DEFAULT_BUTTONRESPONSIVENESS_GUI, // new hw 170306 |
|
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
261 .ButtonResponsiveness[1] = DEFAULT_BUTTONRESPONSIVENESS_GUI, // new hw 170306 |
|
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
262 .ButtonResponsiveness[2] = DEFAULT_BUTTONRESPONSIVENESS_GUI, // new hw 170306 |
|
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
263 .ButtonResponsiveness[3] = DEFAULT_BUTTONRESPONSIVENESS_GUI, // new hw 170306 |
| 38 | 264 .nonMetricalSystem = 0, |
| 265 .fallbackToFixedSetpoint = 1, | |
| 266 .bluetoothActive = 0, | |
| 267 .safetystopDepth = 5, | |
| 268 .updateSettingsAllowedFromHeader = 0xFFFF0002, | |
| 269 .scooterControl = 0, | |
| 270 .scooterDrag = 2, | |
| 271 .scooterLoad = 2, | |
| 272 .scooterNumberOfBatteries = 1, | |
| 273 .scooterBattSize = 760, | |
| 274 .scooterSPARE1[0] = 0, | |
| 275 .scooterSPARE2[0] = 0, | |
| 276 .ppo2sensors_deactivated = 0, | |
| 277 .tX_colorscheme = 0, | |
| 278 .tX_userselectedLeftLowerCornerPrimary = 1, | |
| 279 .tX_userselectedLeftLowerCornerTimeout = 0, | |
| 280 .tX_customViewPrimary = 1, | |
| 281 .tX_customViewTimeout = 0, | |
| 282 .timeoutEnterButtonSelectDive = 10, | |
| 283 .logbookOffset = 0, | |
| 284 .alwaysShowPPO2 = 0, | |
| 285 .extraDisplay = EXTRADISPLAY_BIGFONT, | |
| 286 .display_toogle_desc = 200, | |
| 287 .offsetPressure_mbar = 0, | |
| 288 .offsetTemperature_centigrad = 0, | |
| 289 .gasConsumption_travel_l_min = 30, | |
| 290 .gasConsumption_bottom_l_min = 30, | |
| 291 .gasConsumption_deco_l_min = 20, | |
| 292 .debugModeOnStart = 0, | |
| 293 .compassBearing = 0, | |
| 294 .lastKnownBatteryPercentage = 0, | |
| 295 .buttonBalance[0] = 3, | |
| 296 .buttonBalance[1] = 3, | |
| 297 .buttonBalance[2] = 3, | |
| 298 .firmwareVersion[0] = 0,//FirmwareData.firmwareVersion16to32bit.ub.first, | |
| 299 .firmwareVersion[1] = 0,//FirmwareData.firmwareVersion16to32bit.ub.second, | |
| 300 .firmwareVersion[2] = 0,//FirmwareData.firmwareVersion16to32bit.ub.third, | |
| 301 .firmwareVersion[3] = 0,//FirmwareData.firmwareVersion16to32bit.ub.betaFlag, | |
| 302 .timeoutSurfacemodeWithSensors = 600, | |
| 303 .VPM_model = 0, | |
| 304 .GF_model = 0, | |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
305 .FactoryButtonBase = DEFAULT_BUTTONRESPONSIVENESS_GUI, |
| 38 | 306 .FactoryButtonBalance[0] = 3, |
| 307 .FactoryButtonBalance[1] = 3, | |
| 308 .FactoryButtonBalance[2] = 3, | |
|
111
38785aa95837
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
75
diff
changeset
|
309 .FlipDisplay = 0, |
|
210
b2a9e9b02df0
New feature: make selected customviews persistent
Jan Mulder <jlmulder@xs4all.nl>
parents:
172
diff
changeset
|
310 .cv_configuration = 0xFFFFFFFF, |
|
375
4bb5ceebfaf9
Use Enum values for initialization and setting check:
ideenmodellierer
parents:
372
diff
changeset
|
311 .MotionDetection = MOTION_DETECT_OFF, |
| 38 | 312 }; |
| 313 | |
| 314 /* Private function prototypes -----------------------------------------------*/ | |
| 315 uint8_t checkValue(uint8_t value,uint8_t from, uint8_t to); | |
| 316 | |
| 317 /* Functions -----------------------------------------------------------------*/ | |
| 318 | |
| 319 | |
| 320 // =============================================================================== | |
| 321 // set_new_settings_missing_in_ext_flash | |
| 322 /// @brief Add all the new setting variables of this version | |
| 323 /// or/and change what has changed in the meantime | |
| 324 /// | |
| 325 /// Additionally update the serial number if written via bluetooth | |
| 326 /// | |
| 327 // =============================================================================== | |
| 328 void set_new_settings_missing_in_ext_flash(void) | |
| 329 { | |
| 330 // never delete this part setting the serial | |
| 331 if(hardwareDataGetPointer()->secondarySerial != 0xFFFF) | |
| 332 { | |
| 333 settingsGetPointer()->serialHigh = (hardwareDataGetPointer()->secondarySerial / 256); | |
| 334 settingsGetPointer()->serialLow = (hardwareDataGetPointer()->secondarySerial & 0xFF); | |
| 335 } | |
| 336 else | |
| 337 if(hardwareDataGetPointer()->primarySerial != 0xFFFF) | |
| 338 { | |
| 339 settingsGetPointer()->serialHigh = (hardwareDataGetPointer()->primarySerial / 256); | |
| 340 settingsGetPointer()->serialLow = (hardwareDataGetPointer()->primarySerial & 0xFF); | |
| 341 } | |
| 342 else | |
| 343 { | |
| 344 settingsGetPointer()->serialHigh = 0; | |
| 345 settingsGetPointer()->serialLow = 0; | |
| 346 } | |
| 347 | |
| 348 settingsGetPointer()->firmwareVersion[0] = firmware_FirmwareData.versionFirst; | |
| 349 settingsGetPointer()->firmwareVersion[1] = firmware_FirmwareData.versionSecond; | |
| 350 settingsGetPointer()->firmwareVersion[2] = firmware_FirmwareData.versionThird; | |
| 351 settingsGetPointer()->firmwareVersion[3] = firmware_FirmwareData.versionBeta; | |
| 352 | |
| 353 SSettings* pSettings = settingsGetPointer(); | |
| 354 const SSettings* pStandard = settingsGetPointerStandard(); | |
| 355 | |
| 356 pSettings->scooterControl = 0; | |
| 357 | |
|
368
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
324
diff
changeset
|
358 /* Pointing to the old header data => set new data depending on what had been added since last version */ |
| 38 | 359 switch(pSettings->header) |
| 360 { | |
| 361 case 0xFFFF0000: | |
| 362 case 0xFFFF0001: | |
| 363 case 0xFFFF0002: | |
| 364 case 0xFFFF0003: | |
| 365 case 0xFFFF0004: | |
| 366 case 0xFFFF0005: | |
| 367 pSettings->ppo2sensors_deactivated = pStandard->ppo2sensors_deactivated; | |
| 368 pSettings->tX_colorscheme = pStandard->tX_colorscheme; | |
| 369 pSettings->tX_userselectedLeftLowerCornerPrimary = pStandard->tX_userselectedLeftLowerCornerPrimary; | |
| 370 pSettings->tX_userselectedLeftLowerCornerTimeout = pStandard->tX_userselectedLeftLowerCornerTimeout; | |
| 371 pSettings->tX_customViewPrimary = pStandard->tX_customViewPrimary; | |
| 372 pSettings->tX_customViewTimeout = pStandard->tX_customViewTimeout; | |
| 373 // no break | |
| 374 case 0xFFFF0006: | |
| 375 pSettings->timeoutEnterButtonSelectDive = pStandard->timeoutEnterButtonSelectDive; | |
| 376 pSettings->ButtonResponsiveness[0] = pStandard->ButtonResponsiveness[0]; | |
| 377 pSettings->ButtonResponsiveness[1] = pStandard->ButtonResponsiveness[1]; | |
| 378 pSettings->ButtonResponsiveness[2] = pStandard->ButtonResponsiveness[2]; | |
| 379 pSettings->ButtonResponsiveness[3] = pStandard->ButtonResponsiveness[3]; | |
| 380 pSettings->timeoutSurfacemode = pStandard->timeoutSurfacemode; | |
| 381 pSettings->timeoutMenuSurface = pStandard->timeoutMenuSurface; | |
| 382 pSettings->timeoutMenuDive = pStandard->timeoutMenuDive; | |
| 383 pSettings->timeoutMenuEdit = pStandard->timeoutMenuEdit; | |
| 384 pSettings->timeoutInfo = pStandard->timeoutInfo; | |
| 385 pSettings->timeoutInfoCompass = pStandard->timeoutInfoCompass; | |
| 386 pSettings->timeoutDiveReachedZeroDepth = pStandard->timeoutDiveReachedZeroDepth; | |
| 387 pSettings->divetimeToCreateLogbook = pStandard->divetimeToCreateLogbook; | |
| 388 pSettings->safetystopDuration = pStandard->safetystopDuration; // change from on/off to minutes | |
| 389 // no break | |
| 390 case 0xFFFF0007: | |
| 391 case 0xFFFF0008: | |
| 392 pSettings->alwaysShowPPO2 = pStandard->alwaysShowPPO2; | |
| 393 pSettings->logbookOffset = pStandard->logbookOffset; | |
| 394 // no break | |
| 395 case 0xFFFF0009: | |
| 396 pSettings->extraDisplay = pStandard->extraDisplay; | |
| 397 // no break | |
| 398 case 0xFFFF000A: | |
| 399 pSettings->display_toogle_desc = pStandard->display_toogle_desc; | |
| 400 // no break | |
| 401 case 0xFFFF000B: | |
| 402 pSettings->offsetPressure_mbar = pStandard->offsetPressure_mbar; | |
| 403 pSettings->offsetTemperature_centigrad = pStandard->offsetTemperature_centigrad; | |
| 404 pSettings->gasConsumption_travel_l_min = pStandard->gasConsumption_travel_l_min; | |
| 405 pSettings->gasConsumption_bottom_l_min = pStandard->gasConsumption_bottom_l_min; | |
| 406 pSettings->gasConsumption_deco_l_min = pStandard->gasConsumption_deco_l_min; | |
| 407 // no break | |
| 408 case 0xFFFF000C: | |
| 409 memcpy(pSettings->customtext, " hwOS 4\n\r" " welcome\n\r", 60); | |
| 410 // no break | |
| 411 case 0xFFFF000D: // nothing to do from 0xFFFF000D to 0xFFFF000E, just about header :-) | |
| 412 case 0xFFFF000E: | |
| 413 pSettings->debugModeOnStart = 0; | |
| 414 // no break | |
| 415 case 0xFFFF000F: | |
| 416 pSettings->compassBearing = 0; | |
| 417 // no break | |
| 418 case 0xFFFF0010: | |
| 419 pSettings->scooterDrag = 2; | |
| 420 pSettings->scooterLoad = 2; | |
| 421 pSettings->scooterSPARE1[0] = 0; | |
| 422 pSettings->scooterSPARE2[0] = 0; | |
| 423 // no break | |
| 424 case 0xFFFF0011: | |
| 425 pSettings->scooterNumberOfBatteries = 1; | |
| 426 pSettings->scooterBattSize = 760; | |
| 427 pSettings->lastKnownBatteryPercentage = 0; | |
| 428 // no break | |
| 429 case 0xFFFF0012: | |
| 430 pSettings->buttonBalance[0] = 3; | |
| 431 pSettings->buttonBalance[1] = 3; | |
| 432 pSettings->buttonBalance[2] = 3; | |
| 433 // no break | |
| 434 case 0xFFFF0013: | |
| 435 case 0xFFFF0014: | |
| 436 pSettings->timeoutSurfacemodeWithSensors = pStandard->timeoutSurfacemodeWithSensors; | |
| 437 // no break | |
| 438 case 0xFFFF0015: | |
| 439 pSettings->ButtonResponsiveness[3] = pStandard->ButtonResponsiveness[3]; | |
| 440 settingsHelperButtonSens_keepPercentageValues(settingsHelperButtonSens_translate_hwOS_values_to_percentage(pSettings->ButtonResponsiveness[3]), pSettings->ButtonResponsiveness); | |
| 441 pSettings->VPM_model = 0; | |
| 442 pSettings->GF_model = 0; | |
| 443 // no break | |
| 444 case 0xFFFF0016: | |
| 445 pSettings->FactoryButtonBase = pStandard->FactoryButtonBase; | |
| 446 pSettings->FactoryButtonBalance[0] = pStandard->FactoryButtonBalance[0]; | |
| 447 pSettings->FactoryButtonBalance[1] = pStandard->FactoryButtonBalance[1]; | |
| 448 pSettings->FactoryButtonBalance[2] = pStandard->FactoryButtonBalance[2]; | |
| 449 // no break | |
|
111
38785aa95837
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
75
diff
changeset
|
450 case 0xFFFF0017: |
|
38785aa95837
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
75
diff
changeset
|
451 pSettings->FlipDisplay = 0; |
|
38785aa95837
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
75
diff
changeset
|
452 // no break |
|
210
b2a9e9b02df0
New feature: make selected customviews persistent
Jan Mulder <jlmulder@xs4all.nl>
parents:
172
diff
changeset
|
453 case 0xFFFF0018: |
|
b2a9e9b02df0
New feature: make selected customviews persistent
Jan Mulder <jlmulder@xs4all.nl>
parents:
172
diff
changeset
|
454 pSettings->cv_configuration = 0xFFFFFFFF; |
|
b2a9e9b02df0
New feature: make selected customviews persistent
Jan Mulder <jlmulder@xs4all.nl>
parents:
172
diff
changeset
|
455 // no break |
|
368
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
324
diff
changeset
|
456 case 0xFFFF0019: |
|
375
4bb5ceebfaf9
Use Enum values for initialization and setting check:
ideenmodellierer
parents:
372
diff
changeset
|
457 pSettings->MotionDetection = MOTION_DETECT_OFF; |
|
368
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
324
diff
changeset
|
458 // no break |
| 38 | 459 default: |
|
210
b2a9e9b02df0
New feature: make selected customviews persistent
Jan Mulder <jlmulder@xs4all.nl>
parents:
172
diff
changeset
|
460 pSettings->header = pStandard->header; |
| 38 | 461 break; // no break before!! |
| 462 } | |
| 463 } | |
| 464 | |
| 465 | |
| 466 uint8_t newFirmwareVersionCheckViaSettings(void) | |
| 467 { | |
| 468 SSettings* pSettings = settingsGetPointer(); | |
| 469 | |
| 470 if(pSettings->header < 0xFFFF0014) // for the versions without firmwareVersion[] | |
| 471 return 1; | |
| 472 | |
| 473 if(pSettings->firmwareVersion[0] != firmware_FirmwareData.versionFirst) | |
| 474 return 1; | |
| 475 if(pSettings->firmwareVersion[1] != firmware_FirmwareData.versionSecond) | |
| 476 return 1; | |
| 477 if(pSettings->firmwareVersion[2] != firmware_FirmwareData.versionThird) | |
| 478 return 1; | |
| 479 if(pSettings->firmwareVersion[3] != firmware_FirmwareData.versionBeta) | |
| 480 return 1; | |
| 481 | |
| 482 return 0; | |
| 483 } | |
| 484 | |
| 485 | |
| 486 void set_settings_button_to_standard_with_individual_buttonBalance(void) | |
| 487 { | |
| 488 settingsHelperButtonSens_keepPercentageValues(SettingsStandard.ButtonResponsiveness[3], settingsGetPointer()->ButtonResponsiveness); | |
| 489 } | |
| 490 | |
| 491 | |
| 492 uint8_t check_and_correct_settings(void) | |
| 493 { | |
| 494 uint32_t corrections = 0; | |
| 495 uint8_t firstGasFoundOC = 0; | |
| 496 uint8_t firstGasFoundCCR = 0; | |
| 497 | |
| 498 /* uint32_t header; | |
| 499 */ | |
| 500 | |
| 501 /* uint8_t warning_blink_dsec; 1/10 seconds | |
| 502 */ | |
| 503 if((Settings.warning_blink_dsec < 1) || (Settings.warning_blink_dsec > 100)) | |
| 504 { | |
| 505 Settings.warning_blink_dsec = SettingsStandard.warning_blink_dsec; | |
| 506 corrections++; | |
| 507 } | |
| 508 | |
| 509 /* uint8_t lastDiveLogId; | |
| 510 */ | |
| 511 | |
| 512 /* uint32_t logFlashNextSampleStartAddress; | |
| 513 */ | |
| 514 if((Settings.logFlashNextSampleStartAddress < SAMPLESTART) || (Settings.logFlashNextSampleStartAddress > SAMPLESTOP)) | |
| 515 { | |
| 516 Settings.logFlashNextSampleStartAddress = SAMPLESTART; | |
| 517 corrections++; | |
| 518 } | |
| 519 | |
| 520 | |
| 521 /* uint8_t dive_mode; has to before the gases | |
| 522 */ | |
| 523 if( (Settings.dive_mode != DIVEMODE_OC) && | |
| 524 (Settings.dive_mode != DIVEMODE_CCR) && | |
| 525 (Settings.dive_mode != DIVEMODE_Gauge) && | |
| 526 (Settings.dive_mode != DIVEMODE_Apnea) ) | |
| 527 { | |
| 528 Settings.dive_mode = DIVEMODE_OC; | |
| 529 corrections++; | |
| 530 } | |
| 531 | |
| 532 | |
| 533 /* SGasLine gas[1 + (2*NUM_GASES)]; | |
| 534 */ | |
| 535 for(int i=1; i<=2*NUM_GASES;i++) | |
| 536 { | |
| 537 if(Settings.gas[i].oxygen_percentage < 4) | |
| 538 { | |
| 539 Settings.gas[i].oxygen_percentage = 4; | |
| 540 corrections++; | |
| 541 } | |
| 542 if(Settings.gas[i].oxygen_percentage > 100) | |
| 543 { | |
| 544 Settings.gas[i].oxygen_percentage = 100; | |
| 545 corrections++; | |
| 546 } | |
| 547 if((Settings.gas[i].oxygen_percentage + Settings.gas[i].helium_percentage) > 100) | |
| 548 { | |
| 549 Settings.gas[i].helium_percentage = 100 - Settings.gas[i].oxygen_percentage; | |
| 550 corrections++; | |
| 551 } | |
| 552 if(Settings.gas[i].note.ub.deco) | |
| 553 { | |
| 554 if(Settings.gas[i].note.ub.active != 1) | |
| 555 { | |
| 556 Settings.gas[i].note.ub.active = 1; | |
| 557 corrections++; | |
| 558 } | |
| 559 if(Settings.gas[i].note.ub.travel == 1) | |
| 560 { | |
| 561 Settings.gas[i].note.ub.travel = 0; | |
| 562 corrections++; | |
| 563 } | |
| 564 } | |
| 565 if(Settings.gas[i].note.ub.travel) | |
| 566 { | |
| 567 if(Settings.gas[i].note.ub.active != 1) | |
| 568 { | |
| 569 Settings.gas[i].note.ub.active = 1; | |
| 570 corrections++; | |
| 571 } | |
| 572 if(Settings.gas[i].note.ub.deco == 1) | |
| 573 { | |
| 574 Settings.gas[i].note.ub.deco = 0; | |
| 575 corrections++; | |
| 576 } | |
| 577 } | |
| 578 if(Settings.gas[i].note.ub.first) | |
| 579 { | |
| 580 if(Settings.setpoint[i].note.ub.active != 1) | |
| 581 { | |
| 582 Settings.setpoint[i].note.ub.active = 1; | |
| 583 corrections++; | |
| 584 } | |
| 585 if(Settings.gas[i].note.ub.travel == 1) | |
| 586 { | |
| 587 Settings.gas[i].note.ub.travel = 0; | |
| 588 corrections++; | |
| 589 } | |
| 590 if(Settings.gas[i].note.ub.deco == 1) | |
| 591 { | |
| 592 Settings.gas[i].note.ub.deco = 0; | |
| 593 corrections++; | |
| 594 } | |
| 595 if((i<=NUM_GASES) && (!firstGasFoundOC)) | |
| 596 firstGasFoundOC = 1; | |
| 597 else | |
| 598 if((i>NUM_GASES) && (!firstGasFoundCCR)) | |
| 599 firstGasFoundCCR = 1; | |
| 600 else | |
| 601 Settings.gas[i].note.ub.first = 0; | |
| 602 } | |
| 603 if(Settings.gas[i].bottle_size_liter > 40) | |
| 604 { | |
| 605 Settings.gas[i].bottle_size_liter = 40; | |
| 606 corrections++; | |
| 607 } | |
| 608 if(Settings.gas[i].depth_meter > 250) | |
| 609 { | |
| 610 Settings.gas[i].depth_meter = 250; | |
| 611 corrections++; | |
| 612 } | |
| 613 if(Settings.gas[i].depth_meter_travel > 250) | |
| 614 { | |
| 615 Settings.gas[i].depth_meter_travel = 250; | |
| 616 corrections++; | |
| 617 } | |
| 618 /*if(Settings.gas[i].note.ub.senderCode) | |
| 619 { | |
| 620 } | |
| 621 if(Settings.gas[i].bottle_wireless_id) | |
| 622 { | |
| 623 } | |
| 624 */ | |
| 625 } // for(int i=1; i<=2*NUM_GASES;i++) | |
| 626 | |
| 627 if(!firstGasFoundOC) | |
| 628 { | |
| 629 Settings.gas[1].note.ub.active = 1; | |
| 630 Settings.gas[1].note.ub.first = 1; | |
| 631 Settings.gas[1].note.ub.travel = 0; | |
| 632 Settings.gas[1].note.ub.deco = 0; | |
| 633 } | |
| 634 if(!firstGasFoundCCR) | |
| 635 { | |
| 636 Settings.gas[1 + NUM_GASES].note.ub.active = 1; | |
| 637 Settings.gas[1 + NUM_GASES].note.ub.first = 1; | |
| 638 Settings.gas[1 + NUM_GASES].note.ub.travel = 0; | |
| 639 Settings.gas[1 + NUM_GASES].note.ub.deco = 0; | |
| 640 } | |
| 641 /* SSetpointLine setpoint[1 + NUM_GASES]; | |
| 642 */ | |
| 643 for(int i=1; i<=NUM_GASES;i++) | |
| 644 { | |
| 645 if(Settings.setpoint[i].setpoint_cbar < 50) | |
| 646 { | |
| 647 Settings.setpoint[i].setpoint_cbar = 50; | |
| 648 corrections++; | |
| 649 } | |
| 650 if(Settings.setpoint[i].setpoint_cbar > 160) | |
| 651 { | |
| 652 Settings.setpoint[i].setpoint_cbar = 160; | |
| 653 corrections++; | |
| 654 } | |
| 655 if(Settings.setpoint[i].depth_meter > 250) | |
| 656 { | |
| 657 Settings.setpoint[i].depth_meter = 250; | |
| 658 corrections++; | |
| 659 } | |
| 660 if(Settings.setpoint[i].note.ub.deco) | |
| 661 { | |
| 662 if(Settings.setpoint[i].note.ub.active != 1) | |
| 663 { | |
| 664 Settings.setpoint[i].note.ub.active = 1; | |
| 665 corrections++; | |
| 666 } | |
| 667 if(Settings.setpoint[i].note.ub.travel == 1) | |
| 668 { | |
| 669 Settings.setpoint[i].note.ub.travel = 0; | |
| 670 corrections++; | |
| 671 } | |
| 672 } | |
| 673 if(Settings.setpoint[i].note.ub.travel) | |
| 674 { | |
| 675 if(Settings.setpoint[i].note.ub.active != 1) | |
| 676 { | |
| 677 Settings.setpoint[i].note.ub.active = 1; | |
| 678 corrections++; | |
| 679 } | |
| 680 if(Settings.setpoint[i].note.ub.deco == 1) | |
| 681 { | |
| 682 Settings.setpoint[i].note.ub.deco = 0; | |
| 683 corrections++; | |
| 684 } | |
| 685 } | |
| 686 if(Settings.setpoint[i].note.ub.first) | |
| 687 { | |
| 688 if(Settings.setpoint[i].note.ub.active != 1) | |
| 689 { | |
| 690 Settings.setpoint[i].note.ub.active = 1; | |
| 691 corrections++; | |
| 692 } | |
| 693 if(Settings.setpoint[i].note.ub.travel == 1) | |
| 694 { | |
| 695 Settings.setpoint[i].note.ub.travel = 0; | |
| 696 corrections++; | |
| 697 } | |
| 698 if(Settings.setpoint[i].note.ub.deco == 1) | |
| 699 { | |
| 700 Settings.setpoint[i].note.ub.deco = 0; | |
| 701 corrections++; | |
| 702 } | |
| 703 } | |
| 704 } // for(int i=1; i<=NUM_GASES;i++) | |
| 705 | |
| 706 /* uint8_t CCR_Mode; | |
| 707 */ | |
| 708 if( (Settings.CCR_Mode != CCRMODE_Sensors) && | |
| 709 (Settings.CCR_Mode != CCRMODE_FixedSetpoint)) | |
| 710 { | |
| 711 Settings.CCR_Mode = CCRMODE_FixedSetpoint; | |
| 712 corrections++; | |
| 713 } | |
| 714 | |
| 715 /* split2x4_Type deco_type; | |
| 716 */ | |
| 717 if( (Settings.deco_type.ub.standard != GF_MODE) && | |
| 718 (Settings.deco_type.ub.standard != VPM_MODE)) | |
| 719 { | |
| 720 Settings.deco_type.ub.standard = VPM_MODE; | |
| 721 corrections++; | |
| 722 } | |
| 723 if(Settings.deco_type.ub.alternative != GF_MODE) | |
| 724 { | |
| 725 Settings.deco_type.ub.alternative = GF_MODE; | |
| 726 corrections++; | |
| 727 } | |
| 728 | |
| 729 /* uint8_t ppO2_max_deco; | |
| 730 */ | |
| 731 if(Settings.ppO2_max_deco > 190) | |
| 732 { | |
| 733 Settings.ppO2_max_deco = 190; | |
| 734 corrections++; | |
| 735 } | |
| 736 if(Settings.ppO2_max_deco < 100) | |
| 737 { | |
| 738 Settings.ppO2_max_deco = 100; | |
| 739 corrections++; | |
| 740 } | |
| 741 | |
| 742 /* uint8_t ppO2_max_std; | |
| 743 */ | |
| 744 if(Settings.ppO2_max_std > 190) | |
| 745 { | |
| 746 Settings.ppO2_max_std = 190; | |
| 747 corrections++; | |
| 748 } | |
| 749 if(Settings.ppO2_max_std < 100) | |
| 750 { | |
| 751 Settings.ppO2_max_std = 100; | |
| 752 corrections++; | |
| 753 } | |
| 754 | |
| 755 /* uint8_t ppO2_min; | |
| 756 */ | |
| 757 if(Settings.ppO2_min != 15) | |
| 758 { | |
| 759 Settings.ppO2_min = 15; | |
| 760 corrections++; | |
| 761 } | |
| 762 | |
| 763 /* uint8_t CNS_max; | |
| 764 */ | |
| 765 if(Settings.CNS_max != 90) | |
| 766 { | |
| 767 Settings.CNS_max = 90; | |
| 768 corrections++; | |
| 769 } | |
| 770 | |
| 771 /* uint8_t ascent_MeterPerMinute_max; | |
| 772 */ | |
| 773 if(Settings.ascent_MeterPerMinute_max != 30) | |
| 774 { | |
| 775 Settings.ascent_MeterPerMinute_max = 30; | |
| 776 corrections++; | |
| 777 } | |
| 778 | |
| 779 /* uint8_t ascent_MeterPerMinute_showGraph; | |
| 780 */ | |
| 781 if(Settings.ascent_MeterPerMinute_showGraph != 30) | |
| 782 { | |
| 783 Settings.ascent_MeterPerMinute_showGraph = 30; | |
| 784 corrections++; | |
| 785 } | |
| 786 | |
| 787 /* uint8_t future_TTS; | |
| 788 */ | |
| 789 if(Settings.future_TTS > 15) | |
| 790 { | |
| 791 Settings.future_TTS = 15; | |
| 792 corrections++; | |
| 793 } | |
| 794 | |
| 795 /* uint8_t GF_high; | |
| 796 */ | |
| 797 if(Settings.GF_high > 99) | |
| 798 { | |
| 799 Settings.GF_high = 99; | |
| 800 corrections++; | |
| 801 } | |
| 802 if(Settings.GF_high < 45) | |
| 803 { | |
| 804 Settings.GF_high = 45; | |
| 805 corrections++; | |
| 806 } | |
| 807 | |
| 808 /* uint8_t GF_low; | |
| 809 */ | |
| 810 if(Settings.GF_low > 99) | |
| 811 { | |
| 812 Settings.GF_low = 99; | |
| 813 corrections++; | |
| 814 } | |
| 815 if(Settings.GF_low < 10) | |
| 816 { | |
| 817 Settings.GF_low = 10; | |
| 818 corrections++; | |
| 819 } | |
| 820 if(Settings.GF_low > Settings.GF_high) | |
| 821 { | |
| 822 Settings.GF_low = Settings.GF_high; | |
| 823 corrections++; | |
| 824 } | |
| 825 | |
| 826 /* uint8_t aGF_high; | |
| 827 */ | |
| 828 if(Settings.aGF_high > 99) | |
| 829 { | |
| 830 Settings.aGF_high = 99; | |
| 831 corrections++; | |
| 832 } | |
| 833 if(Settings.aGF_high < 45) | |
| 834 { | |
| 835 Settings.aGF_high = 45; | |
| 836 corrections++; | |
| 837 } | |
| 838 | |
| 839 /* uint8_t aGF_low; | |
| 840 */ | |
| 841 if(Settings.aGF_low > 99) | |
| 842 { | |
| 843 Settings.aGF_low = 99; | |
| 844 corrections++; | |
| 845 } | |
| 846 if(Settings.aGF_low < 10) | |
| 847 { | |
| 848 Settings.aGF_low = 10; | |
| 849 corrections++; | |
| 850 } | |
| 851 if(Settings.aGF_low > Settings.aGF_high) | |
| 852 { | |
| 853 Settings.aGF_low = Settings.aGF_high; | |
| 854 corrections++; | |
| 855 } | |
| 856 | |
| 857 /* split2x4_Type VPM_conservatism; | |
| 858 */ | |
| 859 if(Settings.VPM_conservatism.ub.standard > 5) | |
| 860 { | |
| 861 Settings.VPM_conservatism.ub.standard = 5; | |
| 862 corrections++; | |
| 863 } | |
| 864 if(Settings.VPM_conservatism.ub.alternative > 5) | |
| 865 { | |
| 866 Settings.VPM_conservatism.ub.alternative = 5; | |
| 867 corrections++; | |
| 868 } | |
| 869 | |
| 870 /* uint8_t safetystopDuration; | |
| 871 */ | |
| 872 if(Settings.safetystopDuration > 5) | |
| 873 { | |
| 874 Settings.safetystopDuration = 5; | |
| 875 corrections++; | |
| 876 } | |
| 877 | |
| 878 /* uint8_t AtemMinutenVolumenLiter; | |
| 879 */ | |
| 880 if(Settings.AtemMinutenVolumenLiter != 25) | |
| 881 { | |
| 882 Settings.AtemMinutenVolumenLiter = 25; | |
| 883 corrections++; | |
| 884 } | |
| 885 | |
| 886 /* uint8_t ReserveFractionDenominator; | |
| 887 */ | |
| 888 if(Settings.ReserveFractionDenominator != 4) | |
| 889 { | |
| 890 Settings.ReserveFractionDenominator = 4; | |
| 891 corrections++; | |
| 892 } | |
| 893 | |
| 894 /* uint8_t salinity; | |
| 895 */ | |
| 896 if(Settings.salinity > 4) | |
| 897 { | |
| 898 Settings.salinity = 4; | |
| 899 corrections++; | |
| 900 } | |
| 901 | |
| 902 /* uint8_t last_stop_depth_meter; | |
| 903 */ | |
| 904 if(Settings.last_stop_depth_meter > 9) | |
| 905 { | |
| 906 Settings.last_stop_depth_meter = 9; | |
| 907 corrections++; | |
| 908 } | |
| 909 if(Settings.last_stop_depth_meter < 3) | |
| 910 { | |
| 911 Settings.last_stop_depth_meter = 3; | |
| 912 corrections++; | |
| 913 } | |
| 914 | |
| 915 /* uint8_t stop_increment_depth_meter; | |
| 916 */ | |
| 917 if(Settings.stop_increment_depth_meter != 3) | |
| 918 { | |
| 919 Settings.stop_increment_depth_meter = 3; | |
| 920 corrections++; | |
| 921 } | |
| 922 | |
| 923 /* uint8_t brightness; | |
| 924 */ | |
| 925 if(Settings.brightness > 4) | |
| 926 { | |
| 927 Settings.brightness = 4; | |
| 928 corrections++; | |
| 929 } | |
| 930 | |
| 931 /* uint8_t date_format; | |
| 932 */ | |
| 933 if( (Settings.date_format != DDMMYY) && | |
| 934 (Settings.date_format != MMDDYY) && | |
| 935 (Settings.date_format != YYMMDD)) | |
| 936 { | |
| 937 Settings.date_format = DDMMYY; | |
| 938 corrections++; | |
| 939 } | |
| 940 | |
| 941 /* uint8_t selected_language; | |
| 942 */ | |
| 943 if(Settings.selected_language >= LANGUAGE_END) | |
| 944 { | |
| 945 Settings.selected_language = LANGUAGE_English; | |
| 946 corrections++; | |
| 947 } | |
| 948 | |
| 949 /* char customtext[60]; | |
| 950 */ | |
| 951 if(Settings.customtext[59] != 0) | |
| 952 { | |
| 953 Settings.customtext[59] = 0; | |
| 954 corrections++; | |
| 955 } | |
| 956 | |
| 957 /* uint16_t timeoutSurfacemode; | |
| 958 */ | |
| 959 if( (Settings.timeoutSurfacemode != 20) && // Quick Sleep Option | |
| 960 (Settings.timeoutSurfacemode != 120)) | |
| 961 { | |
| 962 Settings.timeoutSurfacemode = 120; | |
| 963 corrections++; | |
| 964 } | |
| 965 | |
| 966 /* uint8_t timeoutMenuSurface; | |
| 967 */ | |
| 968 if(Settings.timeoutMenuSurface != 120) | |
| 969 { | |
| 970 Settings.timeoutMenuSurface = 120; | |
| 971 corrections++; | |
| 972 } | |
| 973 | |
| 974 /* uint8_t timeoutMenuDive; | |
| 975 */ | |
| 976 if(Settings.timeoutMenuDive != 120) | |
| 977 { | |
| 978 Settings.timeoutMenuDive = 120; | |
| 979 corrections++; | |
| 980 } | |
| 981 | |
| 982 /* uint8_t timeoutMenuEdit; | |
| 983 */ | |
| 984 if(Settings.timeoutMenuEdit != 120) | |
| 985 { | |
| 986 Settings.timeoutMenuEdit = 120; | |
| 987 corrections++; | |
| 988 } | |
| 989 | |
| 990 /* uint8_t timeoutInfo; | |
| 991 */ | |
| 992 if(Settings.timeoutInfo != 120) | |
| 993 { | |
| 994 Settings.timeoutInfo = 120; | |
| 995 corrections++; | |
| 996 } | |
| 997 | |
| 998 /* uint8_t timeoutInfoCompass; | |
| 999 */ | |
| 1000 if(Settings.timeoutInfoCompass != 60) | |
| 1001 { | |
| 1002 Settings.timeoutInfoCompass = 60; | |
| 1003 corrections++; | |
| 1004 } | |
| 1005 | |
| 1006 /* uint8_t design; | |
| 1007 */ | |
| 1008 if(Settings.design != 7) | |
| 1009 { | |
| 1010 Settings.design = 7; | |
| 1011 corrections++; | |
| 1012 } | |
| 1013 | |
| 1014 /* uint16_t timeoutDiveReachedZeroDepth; | |
| 1015 */ | |
| 1016 if(Settings.timeoutDiveReachedZeroDepth != 300) | |
| 1017 { | |
| 1018 Settings.timeoutDiveReachedZeroDepth = 300; | |
| 1019 corrections++; | |
| 1020 } | |
| 1021 | |
| 1022 /* uint16_t divetimeToCreateLogbook; | |
| 1023 */ | |
| 1024 if(Settings.divetimeToCreateLogbook != 60) | |
| 1025 { | |
| 1026 Settings.divetimeToCreateLogbook = 60; | |
| 1027 corrections++; | |
| 1028 } | |
| 1029 | |
| 1030 /* uint8_t serialHigh; | |
| 1031 */ | |
| 1032 | |
| 1033 /* uint8_t serialLow; | |
| 1034 */ | |
| 1035 | |
| 1036 /* SUFirmware firmwareVersion16to32bit; | |
| 1037 */ | |
| 1038 | |
| 1039 /* uint32_t backup_localtime_rtc_tr; | |
| 1040 */ | |
| 1041 | |
| 1042 /* uint32_t backup_localtime_rtc_dr; | |
| 1043 */ | |
| 1044 | |
| 1045 /* uint16_t totalDiveCounter; | |
| 1046 */ | |
| 1047 | |
| 1048 /* uint16_t personalDiveCount; | |
| 1049 */ | |
| 1050 | |
| 1051 /* uint8_t showDebugInfo; | |
| 1052 */ | |
| 1053 if(Settings.showDebugInfo > 1) | |
| 1054 { | |
| 1055 Settings.showDebugInfo = 0; | |
| 1056 corrections++; | |
| 1057 } | |
| 1058 | |
| 1059 /* uint8_t ButtonResponsiveness[4]; | |
| 1060 */ | |
| 1061 // Base value, index 3 | |
| 93 | 1062 if(Settings.ButtonResponsiveness[3] < MIN_BUTTONRESPONSIVENESS_GUI) |
| 38 | 1063 { |
| 93 | 1064 Settings.ButtonResponsiveness[3] = MIN_BUTTONRESPONSIVENESS_GUI; |
| 38 | 1065 corrections++; |
| 1066 } | |
| 1067 else | |
| 151 | 1068 if(Settings.ButtonResponsiveness[3] > MAX_BUTTONRESPONSIVENESS_GUI) |
| 38 | 1069 { |
| 151 | 1070 Settings.ButtonResponsiveness[3] = MAX_BUTTONRESPONSIVENESS_GUI; |
| 38 | 1071 corrections++; |
| 1072 } | |
| 1073 // flex values 0, 1, 2 | |
| 1074 for(int i=0; i<3;i++) | |
| 1075 { | |
| 93 | 1076 if(Settings.ButtonResponsiveness[i] < MIN_BUTTONRESPONSIVENESS) // 50-10 //Fix for broken buttons. :) |
| 38 | 1077 { |
| 93 | 1078 Settings.ButtonResponsiveness[i] = MIN_BUTTONRESPONSIVENESS; |
| 38 | 1079 corrections++; |
| 1080 } | |
| 1081 else | |
| 93 | 1082 if(Settings.ButtonResponsiveness[i] > MAX_BUTTONRESPONSIVENESS) // 110+20 |
| 38 | 1083 { |
| 93 | 1084 Settings.ButtonResponsiveness[i] = MAX_BUTTONRESPONSIVENESS; |
| 38 | 1085 corrections++; |
| 1086 } | |
| 1087 } | |
| 1088 | |
| 1089 /* uint8_t buttonBalance[3]; | |
| 1090 */ | |
| 1091 for(int i=0; i<3;i++) | |
| 1092 { | |
| 1093 if(Settings.buttonBalance[i] < 2) // 2 = -10 | |
| 1094 { | |
| 1095 Settings.buttonBalance[i] = 2; | |
| 1096 corrections++; | |
| 1097 } | |
| 1098 else | |
| 1099 if(Settings.buttonBalance[i] > 5) // 3 = 0, 4 = +10, 5 = +20 | |
| 1100 { | |
| 1101 Settings.buttonBalance[i] = 5; | |
| 1102 corrections++; | |
| 1103 } | |
| 1104 } | |
| 1105 | |
| 1106 /* uint8_t nonMetricalSystem; | |
| 1107 */ | |
| 1108 if(Settings.nonMetricalSystem > 1) | |
| 1109 { | |
| 1110 Settings.nonMetricalSystem = 1; | |
| 1111 corrections++; | |
| 1112 } | |
| 1113 | |
| 1114 /* uint8_t fallbackToFixedSetpoint; | |
| 1115 */ | |
| 1116 if(Settings.fallbackToFixedSetpoint > 1) | |
| 1117 { | |
| 1118 Settings.fallbackToFixedSetpoint = 1; | |
| 1119 corrections++; | |
| 1120 } | |
| 1121 | |
| 1122 /* uint8_t bluetoothActive; | |
| 1123 */ | |
| 1124 if(Settings.bluetoothActive > 1) | |
| 1125 { | |
| 1126 Settings.bluetoothActive = 1; | |
| 1127 corrections++; | |
| 1128 } | |
| 1129 | |
| 1130 /* uint8_t safetystopDepth; | |
| 1131 */ | |
| 1132 if(Settings.safetystopDepth > 6) | |
| 1133 { | |
| 1134 Settings.safetystopDepth = 6; | |
| 1135 corrections++; | |
| 1136 } | |
| 1137 if(Settings.safetystopDepth < 3) | |
| 1138 { | |
| 1139 Settings.safetystopDepth = 3; | |
| 1140 corrections++; | |
| 1141 } | |
| 1142 | |
| 1143 /* uint32_t updateSettingsAllowedFromHeader; | |
| 1144 */ | |
| 1145 | |
| 1146 /* uint8_t ppo2sensors_deactivated; | |
| 1147 */ | |
| 1148 if(Settings.ppo2sensors_deactivated > (1+2+4)) | |
| 1149 { | |
| 1150 Settings.ppo2sensors_deactivated = 0; | |
| 1151 corrections++; | |
| 1152 } | |
| 1153 | |
| 1154 /* uint8_t tX_colorscheme; | |
| 1155 */ | |
| 1156 if(Settings.tX_colorscheme > 3) | |
| 1157 { | |
| 1158 Settings.tX_colorscheme = 0; | |
| 1159 corrections++; | |
| 1160 } | |
| 1161 | |
| 1162 /* uint8_t tX_userselectedLeftLowerCornerPrimary; | |
| 1163 */ | |
|
259
26c874cdde0d
feature: allow new saturation to be set in lower left corner
Jan Mulder <jlmulder@xs4all.nl>
parents:
210
diff
changeset
|
1164 if(Settings.tX_userselectedLeftLowerCornerPrimary > 8) |
| 38 | 1165 { |
| 1166 Settings.tX_userselectedLeftLowerCornerPrimary = 1; | |
| 1167 corrections++; | |
| 1168 } | |
| 1169 | |
| 1170 /* uint8_t tX_userselectedLeftLowerCornerTimeout; | |
| 1171 */ | |
| 1172 if(Settings.tX_userselectedLeftLowerCornerTimeout > 60) | |
| 1173 { | |
| 1174 Settings.tX_userselectedLeftLowerCornerTimeout = 0; | |
| 1175 corrections++; | |
| 1176 } | |
| 1177 | |
| 1178 /* uint8_t tX_customViewPrimary; | |
| 1179 */ | |
| 1180 if(Settings.tX_customViewPrimary >= CVIEW_END) | |
| 1181 { | |
| 1182 Settings.tX_customViewPrimary = 1; | |
| 1183 corrections++; | |
| 1184 } | |
| 1185 | |
| 1186 /* uint8_t tX_customViewTimeout; | |
| 1187 */ | |
| 1188 if(Settings.tX_customViewTimeout > 60) | |
| 1189 { | |
| 1190 Settings.tX_customViewTimeout = 0; | |
| 1191 corrections++; | |
| 1192 } | |
| 1193 | |
| 1194 /* uint8_t timeoutEnterButtonSelectDive; | |
| 1195 */ | |
| 1196 if(Settings.timeoutEnterButtonSelectDive != 10) | |
| 1197 { | |
| 1198 Settings.timeoutEnterButtonSelectDive = 10; | |
| 1199 corrections++; | |
| 1200 } | |
| 1201 | |
| 1202 /* uint8_t logbookOffset; | |
| 1203 */ | |
| 1204 if(Settings.logbookOffset > 9000) | |
| 1205 { | |
| 1206 Settings.logbookOffset = 0; | |
| 1207 corrections++; | |
| 1208 } | |
| 1209 | |
| 1210 /* uint8_t alwaysShowPPO2; | |
| 1211 */ | |
| 1212 if(Settings.alwaysShowPPO2 > 1) | |
| 1213 { | |
| 1214 Settings.alwaysShowPPO2 = 0; | |
| 1215 corrections++; | |
| 1216 } | |
| 1217 | |
| 1218 /* uint8_t extraDisplay; | |
| 1219 */ | |
| 1220 if(Settings.extraDisplay >= EXTRADISPLAY_END) | |
| 1221 { | |
| 1222 Settings.extraDisplay = EXTRADISPLAY_BIGFONT; | |
| 1223 corrections++; | |
| 1224 } | |
| 1225 | |
| 1226 /* int8_t offsetPressure_mbar; | |
| 1227 */ | |
|
337
38367bb982b8
Set Max value for pressure offset to 50mBar (20mBar before)
ideenmodellierer
parents:
334
diff
changeset
|
1228 if((Settings.offsetPressure_mbar > PRESSURE_OFFSET_LIMIT_MBAR) || |
|
38367bb982b8
Set Max value for pressure offset to 50mBar (20mBar before)
ideenmodellierer
parents:
334
diff
changeset
|
1229 (Settings.offsetPressure_mbar < -1 * PRESSURE_OFFSET_LIMIT_MBAR)) |
| 38 | 1230 { |
| 1231 Settings.offsetPressure_mbar = 0; | |
| 1232 corrections++; | |
| 1233 } | |
| 1234 | |
| 1235 /* int8_t offsetTemperature_centigrad; | |
| 1236 */ | |
| 1237 if((Settings.offsetTemperature_centigrad > 20) || | |
| 1238 (Settings.offsetTemperature_centigrad < -20)) | |
| 1239 { | |
| 1240 Settings.offsetTemperature_centigrad = 0; | |
| 1241 corrections++; | |
| 1242 } | |
| 1243 | |
| 1244 /* uint8_t gasConsumption_travel_l_min; | |
| 1245 */ | |
| 1246 if((Settings.gasConsumption_travel_l_min < 5) || | |
| 1247 (Settings.gasConsumption_travel_l_min > 50)) | |
| 1248 { | |
| 1249 Settings.gasConsumption_travel_l_min = 20; | |
| 1250 corrections++; | |
| 1251 } | |
| 1252 | |
| 1253 /* uint8_t gasConsumption_bottom_l_min; | |
| 1254 */ | |
| 1255 if((Settings.gasConsumption_bottom_l_min < 5) || | |
| 1256 (Settings.gasConsumption_bottom_l_min > 50)) | |
| 1257 { | |
| 1258 Settings.gasConsumption_bottom_l_min = 20; | |
| 1259 corrections++; | |
| 1260 } | |
| 1261 | |
| 1262 /* uint8_t gasConsumption_deco_l_min; | |
| 1263 */ | |
| 1264 if((Settings.gasConsumption_deco_l_min < 5) || | |
| 1265 (Settings.gasConsumption_deco_l_min > 50)) | |
| 1266 { | |
| 1267 Settings.gasConsumption_deco_l_min = 20; | |
| 1268 corrections++; | |
| 1269 } | |
| 1270 | |
| 1271 /* uint8_t showDebugInfo; | |
| 1272 */ | |
| 1273 #ifdef BOOT16 | |
| 1274 Settings.showDebugInfo = 0; | |
| 1275 #else | |
| 1276 if(Settings.showDebugInfo > 1) | |
| 1277 Settings.showDebugInfo = 0; | |
| 1278 | |
| 1279 #endif | |
| 1280 | |
| 1281 /* uint8_t selected_language; | |
| 1282 */ | |
| 1283 #ifdef BOOT16 | |
| 1284 if(Settings.selected_language > 1) | |
| 1285 Settings.selected_language = 0; | |
| 1286 #else | |
| 1287 if(Settings.selected_language > 4) | |
| 1288 Settings.selected_language = 0; | |
| 1289 #endif | |
| 1290 | |
| 1291 | |
| 1292 /* uint8_t display_toogle_desc; 1/10 seconds | |
| 1293 */ | |
| 1294 if((Settings.display_toogle_desc < 20) || (Settings.display_toogle_desc > 600)) | |
| 1295 { | |
| 1296 Settings.display_toogle_desc = SettingsStandard.display_toogle_desc; | |
| 1297 corrections++; | |
| 1298 } | |
| 1299 | |
| 1300 /* uint8_t debugModeOnStart; | |
| 1301 */ | |
| 1302 if(Settings.debugModeOnStart > 1) | |
| 1303 { | |
| 1304 Settings.debugModeOnStart = 0; | |
| 1305 corrections++; | |
| 1306 } | |
| 1307 | |
| 1308 | |
| 1309 /* uint8_t IAmStolenPleaseKillMe; | |
| 1310 */ | |
| 1311 | |
| 1312 if(hardwareDataGetPointer()->primarySerial == 90) | |
| 1313 Settings.IAmStolenPleaseKillMe++; | |
| 1314 else | |
| 1315 Settings.IAmStolenPleaseKillMe = 0; | |
| 1316 | |
| 1317 | |
| 1318 /* uint8_t debugModeOnStart; | |
| 1319 */ | |
| 1320 if(Settings.compassBearing > 360) | |
| 1321 { | |
| 1322 Settings.compassBearing = 0; | |
| 1323 corrections++; | |
| 1324 } | |
| 1325 | |
| 1326 | |
| 1327 /* uint8_t lastKnownBatteryPercentage; | |
| 1328 */ | |
| 1329 if(Settings.lastKnownBatteryPercentage > 100) | |
| 1330 { | |
| 1331 Settings.lastKnownBatteryPercentage = 100; | |
| 1332 corrections++; | |
| 1333 } | |
| 1334 | |
| 1335 /* uint8_t VPM_model | |
| 1336 */ | |
| 1337 if((Settings.VPM_model != VPM_FROM_FORTRAN) && (Settings.VPM_model != VPM_BACHELORWORK)) | |
| 1338 { | |
| 1339 Settings.VPM_model = VPM_FROM_FORTRAN; | |
| 1340 corrections++; | |
| 1341 } | |
| 1342 | |
| 1343 /* uint8_t Buehlmann_model | |
| 1344 */ | |
| 1345 if((Settings.GF_model != BUEHLMANN_OSTC4) && (Settings.GF_model != BUEHLMANN_hwOS)) | |
| 1346 { | |
| 1347 Settings.GF_model = BUEHLMANN_OSTC4; | |
| 1348 corrections++; | |
| 1349 } | |
| 1350 | |
|
111
38785aa95837
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
75
diff
changeset
|
1351 if(Settings.FlipDisplay > 1) /* only boolean values allowed */ |
|
38785aa95837
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
75
diff
changeset
|
1352 { |
|
38785aa95837
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
75
diff
changeset
|
1353 Settings.FlipDisplay = 0; |
|
38785aa95837
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
75
diff
changeset
|
1354 corrections++; |
|
38785aa95837
Added new nvm parameter"FlipDisplay" indicating the screen orientation
Ideenmodellierer
parents:
75
diff
changeset
|
1355 } |
|
375
4bb5ceebfaf9
Use Enum values for initialization and setting check:
ideenmodellierer
parents:
372
diff
changeset
|
1356 if(Settings.MotionDetection >= MOTION_DETECT_END) |
|
368
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
324
diff
changeset
|
1357 { |
|
375
4bb5ceebfaf9
Use Enum values for initialization and setting check:
ideenmodellierer
parents:
372
diff
changeset
|
1358 Settings.MotionDetection = MOTION_DETECT_OFF; |
|
368
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
324
diff
changeset
|
1359 corrections++; |
|
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
324
diff
changeset
|
1360 } |
| 38 | 1361 |
| 1362 if(corrections > 255) | |
| 1363 return 255; | |
| 1364 else | |
| 1365 return (uint8_t)corrections; | |
| 1366 } | |
| 1367 | |
| 1368 | |
| 1369 /* always at 0x8080000, do not move -> bootloader access */ | |
| 1370 const SFirmwareData* firmwareDataGetPointer(void) | |
| 1371 { | |
| 1372 return &firmware_FirmwareData; | |
| 1373 } | |
| 1374 | |
| 1375 | |
| 1376 #ifndef SPECIALPROGRAMM | |
| 1377 const SHardwareData* hardwareDataGetPointer(void) | |
| 1378 { | |
| 1379 return (SHardwareData *)HARDWAREDATA_ADDRESS; | |
| 1380 } | |
| 1381 #endif | |
| 1382 | |
| 1383 const SSettings* settingsGetPointerStandard(void) | |
| 1384 { | |
| 1385 return &SettingsStandard; | |
| 1386 } | |
| 1387 | |
| 1388 | |
| 1389 void hardwareBatchCode(uint8_t *high, uint8_t *low) | |
| 1390 { | |
| 1391 if(high) | |
| 1392 { | |
| 1393 *high = (uint8_t)((hardwareDataGetPointer()->production_year - 16) * 16); | |
| 1394 *high += hardwareDataGetPointer()->production_month; | |
| 1395 if(low) | |
| 1396 { | |
| 1397 *low = (uint8_t)(hardwareDataGetPointer()->production_day * 8); | |
| 1398 } | |
| 1399 } | |
| 1400 } | |
| 1401 | |
| 1402 | |
| 1403 uint8_t firmwareVersion_16bit_high(void) | |
| 1404 { | |
|
319
d8e86af78474
bugfix: correct packed main version number in dive header
Jan Mulder <jlmulder@xs4all.nl>
parents:
286
diff
changeset
|
1405 return ((firmware_FirmwareData.versionFirst & 0x1F) << 3) + ((firmware_FirmwareData.versionSecond & 0x1C) >> 2); |
| 38 | 1406 } |
| 1407 | |
| 1408 uint8_t firmwareVersion_16bit_low(void) | |
| 1409 { | |
| 1410 return ((firmware_FirmwareData.versionSecond & 0x03) << 6) + ((firmware_FirmwareData.versionThird & 0x1F) << 1) + (firmware_FirmwareData.versionBeta & 0x01); | |
| 1411 } | |
| 1412 | |
|
368
50ea68c7a153
Added menu item for motion detection. There are several possibility to use motion detection for user action input. To select of the a new menu entry has been added to the Sys2 =>Custom View Menu (Variables in german)
ideenmodellierer
parents:
324
diff
changeset
|
1413 inline SSettings* settingsGetPointer(void) |
| 38 | 1414 { |
| 1415 return &Settings; | |
| 1416 } | |
| 1417 | |
| 1418 | |
| 1419 // =============================================================================== | |
| 1420 // set_settings_to_Standard | |
| 1421 /// @brief This function overwrites the current settings of the system | |
| 1422 /// with the EXCEPTION of the personalDiveCount | |
| 1423 /// | |
| 1424 /// It additionally calls set_new_settings_missing_in_ext_flash() and | |
| 1425 /// check_and_correct_settings(), even so this shouldn't be necessary. | |
| 1426 /// It is called on every start and from Reset All. | |
| 1427 /// | |
| 1428 /// 160622 added lastDiveLogIdBackup | |
| 1429 /// | |
| 1430 // =============================================================================== | |
| 1431 void set_settings_to_Standard(void) | |
| 1432 { | |
| 1433 SSettings *pSettings; | |
| 1434 const SSettings *pSettingsStandard; | |
| 1435 uint16_t personalDiveCountBackup; | |
| 1436 uint8_t lastDiveLogIdBackup; | |
| 1437 pSettings = settingsGetPointer(); | |
| 1438 pSettingsStandard = settingsGetPointerStandard(); | |
| 1439 | |
| 1440 personalDiveCountBackup = pSettings->personalDiveCount; | |
| 1441 lastDiveLogIdBackup = pSettings->lastDiveLogId; | |
| 1442 memcpy(pSettings,pSettingsStandard,sizeof(*pSettings)); | |
| 1443 pSettings->personalDiveCount = personalDiveCountBackup; | |
| 1444 pSettings->lastDiveLogId = lastDiveLogIdBackup; | |
| 1445 | |
| 1446 pSettings->firmwareVersion[0] = firmware_FirmwareData.versionFirst; | |
| 1447 pSettings->firmwareVersion[1] = firmware_FirmwareData.versionSecond; | |
| 1448 pSettings->firmwareVersion[2] = firmware_FirmwareData.versionThird; | |
| 1449 pSettings->firmwareVersion[3] = firmware_FirmwareData.versionBeta; | |
| 1450 | |
| 1451 set_new_settings_missing_in_ext_flash(); | |
| 1452 check_and_correct_settings(); | |
| 1453 // has to be called too: createDiveSettings(); | |
| 1454 } | |
| 1455 | |
| 1456 | |
| 1457 // =============================================================================== | |
| 1458 // mod_settings_for_first_start_with_empty_ext_flash | |
| 1459 /// @brief This function overwrites some settings of the system | |
| 1460 /// It is called on every start. | |
| 1461 /// Those settings will be overwriten by ext_flash_read_settings() | |
| 1462 /// Will be kept if ext_flash_read_settings() is invalid because | |
| 1463 /// it is still empty. | |
| 1464 /// | |
| 1465 // =============================================================================== | |
| 1466 void mod_settings_for_first_start_with_empty_ext_flash(void) | |
| 1467 { | |
| 1468 settingsGetPointer()->debugModeOnStart = 1; // | |
| 1469 } | |
| 1470 | |
| 1471 | |
| 1472 | |
| 1473 // =============================================================================== | |
| 1474 // hwOS4_to_hwOS_GasType | |
| 1475 /// @brief Helper for get gas / diluent | |
| 1476 /// | |
| 1477 // =============================================================================== | |
| 1478 uint8_t hwOS4_to_hwOS_GasType(uint8_t inOSTC4style) | |
| 1479 { | |
| 1480 switch(inOSTC4style) | |
| 1481 { | |
| 1482 case (1+2): // first | |
| 1483 case (2): // first | |
| 1484 return 1; // hwOS style first | |
| 1485 case (1+4): // deco | |
| 1486 case (4): // deco | |
| 1487 return 3; // hwOS style deco | |
| 1488 case (1+8): // travel | |
| 1489 case (8): // travel | |
| 1490 return 2; // hwOS style travel | |
| 1491 default: | |
| 1492 return 0; // hwOS style Disabled | |
| 1493 } | |
| 1494 } | |
| 1495 | |
| 1496 | |
| 1497 // =============================================================================== | |
| 1498 // hwOS_to_hwOS4_GasType | |
| 1499 /// @brief Helper for set gas / diluent | |
| 1500 /// | |
| 1501 // =============================================================================== | |
| 1502 uint8_t hwOS_to_hwOS4_GasType(uint8_t inOSTC4style) | |
| 1503 { | |
| 1504 switch(inOSTC4style) | |
| 1505 { | |
| 1506 case (1): // first | |
| 1507 return 1+2; // hwOS4 style first | |
| 1508 case (2): // travel (normal for diluent) | |
| 1509 return 1+8; // hwOS4 style travel | |
| 1510 case (3): // deco | |
| 1511 return 1+4; // hwOS4 style deco | |
| 1512 default: | |
| 1513 return 0; // hwOS4 style inactive | |
| 1514 } | |
| 1515 } | |
| 1516 | |
| 1517 | |
| 1518 | |
| 1519 // =============================================================================== | |
| 1520 // setGas | |
| 1521 /// @brief This function overwrites one gas, including mode and deco depth, | |
| 1522 /// it returns 0x4D prompt which is not used by writeData() that calls it. | |
| 1523 /// | |
| 1524 /// @param i the gas id from 1 to 5 for OC and 6 to 10 for CCR, 0 is the extra gas | |
| 1525 /// @param *data 5 bytes with the first the command to call setGas and the four | |
| 1526 /// following bytes to define oxygen, helium, mode and deco depth | |
| 1527 /// | |
| 1528 /// @return 0x4D (prompt that is not used) | |
| 1529 // =============================================================================== | |
| 1530 uint8_t setGas(int i,uint8_t * data) | |
| 1531 { | |
| 1532 if(!checkValue(data[1],4,100)) | |
| 1533 return ERROR_; | |
| 1534 if(!checkValue(data[4],0,250)) | |
| 1535 return ERROR_; | |
| 1536 | |
| 1537 Settings.gas[i].oxygen_percentage = data[1]; | |
| 1538 Settings.gas[i].helium_percentage = data[2]; | |
| 1539 Settings.gas[i].note.uw = hwOS_to_hwOS4_GasType(data[3]); | |
| 1540 Settings.gas[i].depth_meter = data[4]; | |
| 1541 return 0x4d; | |
| 1542 } | |
| 1543 | |
| 1544 | |
| 1545 uint8_t getGas(int i,uint8_t * data) | |
| 1546 { | |
| 1547 data[0] = Settings.gas[i].oxygen_percentage; | |
| 1548 data[1] = Settings.gas[i].helium_percentage; | |
| 1549 data[2] = hwOS4_to_hwOS_GasType(Settings.gas[i].note.uw); | |
| 1550 data[3] = Settings.gas[i].depth_meter; | |
| 1551 return 0x4d; | |
| 1552 } | |
| 1553 | |
| 1554 uint8_t setDiluent(int i,uint8_t * data) | |
| 1555 { | |
| 1556 if(!checkValue(data[1],4,100)) | |
| 1557 return ERROR_; | |
| 1558 if(!checkValue(data[4],0,250)) | |
| 1559 return ERROR_; | |
| 1560 | |
| 1561 Settings.gas[NUM_OFFSET_DILUENT + i].oxygen_percentage = data[1]; | |
| 1562 Settings.gas[NUM_OFFSET_DILUENT + i].helium_percentage = data[2]; | |
| 1563 Settings.gas[NUM_OFFSET_DILUENT + i].note.uw = hwOS_to_hwOS4_GasType(data[3]); | |
| 1564 Settings.gas[NUM_OFFSET_DILUENT + i].depth_meter = data[4]; | |
| 1565 return 0x4d; | |
| 1566 } | |
| 1567 | |
| 1568 uint8_t getDiluent(int i,uint8_t * data) | |
| 1569 { | |
| 1570 data[0] = Settings.gas[NUM_OFFSET_DILUENT + i].oxygen_percentage; | |
| 1571 data[1] = Settings.gas[NUM_OFFSET_DILUENT + i].helium_percentage; | |
| 1572 data[2] = hwOS4_to_hwOS_GasType(Settings.gas[NUM_OFFSET_DILUENT + i].note.uw); | |
| 1573 data[3] = Settings.gas[NUM_OFFSET_DILUENT + i].depth_meter; | |
| 1574 return 0x4d; | |
| 1575 } | |
| 1576 | |
| 1577 uint8_t setSetpoint(int i,uint8_t * data) | |
| 1578 { | |
| 1579 if(!checkValue(data[1],50,160)) | |
| 1580 return ERROR_; | |
| 1581 if(!checkValue(data[2],0,250)) | |
| 1582 return ERROR_; | |
| 1583 | |
| 1584 Settings.setpoint[i].setpoint_cbar = data[1]; | |
| 1585 Settings.setpoint[i].depth_meter = data[2]; | |
| 1586 return 0x4d; | |
| 1587 } | |
| 1588 | |
| 1589 uint8_t getSetpoint(int i,uint8_t * data) | |
| 1590 { | |
| 1591 data[0] = Settings.setpoint[i].setpoint_cbar; | |
| 1592 data[1] = Settings.setpoint[i].depth_meter; | |
| 1593 return 0x4d; | |
| 1594 } | |
| 1595 | |
| 1596 uint8_t checkValue(uint8_t value,uint8_t from, uint8_t to) | |
| 1597 { | |
| 1598 if(value >= from && value <= to) | |
| 1599 return 1; | |
| 1600 return 0; | |
| 1601 } | |
| 1602 | |
| 1603 uint8_t writeData(uint8_t * data) | |
| 1604 { | |
| 1605 uint32_t newSensitivity; | |
| 1606 uint16_t newDuration, newOffset; | |
| 1607 uint8_t newStopDepth; | |
| 1608 | |
| 1609 switch(data[0]) | |
| 1610 { | |
| 1611 case 0x10: | |
| 1612 return setGas(1,data); | |
| 1613 case 0x11: | |
| 1614 return setGas(2,data); | |
| 1615 case 0x12: | |
| 1616 return setGas(3,data); | |
| 1617 case 0x13: | |
| 1618 return setGas(4,data); | |
| 1619 case 0x14: | |
| 1620 return setGas(5,data); | |
| 1621 case 0x15: | |
| 1622 return setDiluent(1,data); | |
| 1623 case 0x16: | |
| 1624 return setDiluent(2,data); | |
| 1625 case 0x17: | |
| 1626 return setDiluent(3,data); | |
| 1627 case 0x18: | |
| 1628 return setDiluent(4,data); | |
| 1629 case 0x19: | |
| 1630 return setDiluent(5,data); | |
| 1631 case 0x1A: | |
| 1632 return setSetpoint(1,data); | |
| 1633 case 0x1B: | |
| 1634 return setSetpoint(2,data); | |
| 1635 case 0x1C: | |
| 1636 return setSetpoint(3,data); | |
| 1637 case 0x1D: | |
| 1638 return setSetpoint(4,data); | |
| 1639 case 0x1E: | |
| 1640 return setSetpoint(5,data); | |
| 1641 case 0x1F: | |
| 1642 if(!checkValue(data[2],0,1)) | |
| 1643 return ERROR_; | |
| 1644 Settings.CCR_Mode = data[1]; | |
| 1645 break; | |
| 1646 case 0x20: | |
| 1647 if(!checkValue(data[1],0,3)) | |
| 1648 return ERROR_; | |
| 1649 Settings.dive_mode = data[1]; | |
| 1650 break; | |
| 1651 case 0x21: | |
| 1652 if(!checkValue(data[1],1,2)) | |
| 1653 return ERROR_; | |
| 1654 Settings.deco_type.ub.standard = data[1] & 0x0F; | |
| 1655 //Settings.deco_type.ub.alternative = (data[1] & 0xF0) >> 4; | |
| 1656 break; | |
| 1657 case 0x22: | |
| 1658 if(!checkValue(data[1],100,190)) | |
| 1659 return ERROR_; | |
| 1660 Settings.ppO2_max_std = data[1]; | |
| 1661 break; | |
| 1662 case 0x23: | |
| 1663 if(!checkValue(data[1],15,15)) | |
| 1664 return ERROR_; | |
| 1665 Settings.ppO2_min = data[1]; | |
| 1666 break; | |
| 1667 case 0x24: | |
| 1668 if(!checkValue(data[1],0,15)) | |
| 1669 return ERROR_; | |
| 1670 Settings.future_TTS = data[1]; | |
| 1671 break; | |
| 1672 case 0x25: | |
| 1673 if(!checkValue(data[1],10,99)) | |
| 1674 return ERROR_; | |
| 1675 Settings.GF_low = data[1]; | |
| 1676 break; | |
| 1677 case 0x26: | |
| 1678 if(!checkValue(data[1],45,99)) | |
| 1679 return ERROR_; | |
| 1680 Settings.GF_high = data[1]; | |
| 1681 break; | |
| 1682 case 0x27: | |
| 1683 if(!checkValue(data[1],10,99)) | |
| 1684 return ERROR_; | |
| 1685 Settings.aGF_low = data[1]; | |
| 1686 break; | |
| 1687 case 0x28: | |
| 1688 if(!checkValue(data[1],45,99)) | |
| 1689 return ERROR_; | |
| 1690 Settings.aGF_high = data[1]; | |
| 1691 break; | |
| 1692 case 0x29: | |
| 1693 if(!checkValue(data[1],0,5)) | |
| 1694 return ERROR_; | |
| 1695 Settings.VPM_conservatism.ub.standard = data[1]; | |
| 1696 break; | |
| 1697 case 0x2A: | |
| 1698 case 0x2B: | |
| 1699 return ERROR_; | |
| 1700 case 0x2C: | |
| 1701 if(!checkValue(data[1],3,9)) | |
| 1702 return ERROR_; | |
| 1703 Settings.last_stop_depth_meter = data[1]; | |
| 1704 break; | |
| 1705 case 0x2D: | |
| 1706 if(!checkValue(data[1],0,4)) | |
| 1707 return ERROR_; | |
| 1708 Settings.brightness = data[1]; | |
| 1709 break; | |
| 1710 case 0x2E: | |
| 1711 if(!checkValue(data[1],0,1)) | |
| 1712 return ERROR_; | |
| 1713 Settings.nonMetricalSystem = data[1]; | |
| 1714 break; | |
| 1715 case 0x2F: | |
| 1716 return ERROR_; | |
| 1717 case 0x30: | |
| 1718 if(!checkValue(data[1],0,4)) | |
| 1719 return ERROR_; | |
| 1720 Settings.salinity = data[1]; | |
| 1721 break; | |
| 1722 case 0x31: | |
| 1723 if(!checkValue(data[1],0,3)) | |
| 1724 return ERROR_; | |
| 1725 Settings.tX_colorscheme = data[1]; | |
| 1726 GFX_use_colorscheme(Settings.tX_colorscheme); | |
| 1727 break; | |
| 1728 case 0x32: | |
| 1729 if(!checkValue(data[1],0,4)) | |
| 1730 return ERROR_; | |
| 1731 Settings.selected_language = data[1]; | |
| 1732 break; | |
| 1733 case 0x33: | |
| 1734 if(!checkValue(data[1],0,2)) | |
| 1735 return ERROR_; | |
| 1736 Settings.date_format = data[1]; | |
| 1737 break; | |
| 1738 case 0x34: | |
| 1739 return ERROR_; | |
| 1740 case 0x35: | |
| 1741 if(data[1] & 0x80) | |
| 1742 { | |
| 1743 data[1] = ~(data[1]); | |
|
337
38367bb982b8
Set Max value for pressure offset to 50mBar (20mBar before)
ideenmodellierer
parents:
334
diff
changeset
|
1744 if(!checkValue(data[1],0,PRESSURE_OFFSET_LIMIT_MBAR)) |
| 38 | 1745 return ERROR_; |
| 1746 Settings.offsetPressure_mbar = 0 - data[1]; | |
| 1747 } | |
| 1748 else | |
| 1749 { | |
|
337
38367bb982b8
Set Max value for pressure offset to 50mBar (20mBar before)
ideenmodellierer
parents:
334
diff
changeset
|
1750 if(!checkValue(data[1],0,PRESSURE_OFFSET_LIMIT_MBAR)) |
| 38 | 1751 return ERROR_; |
| 1752 Settings.offsetPressure_mbar = data[1]; | |
| 1753 } | |
| 1754 break; | |
| 1755 case 0x36: | |
| 1756 if(!checkValue(data[1],0,1)) | |
| 1757 return ERROR_; | |
| 1758 if(data[1]) | |
| 1759 Settings.safetystopDuration = settingsGetPointerStandard()->safetystopDuration; | |
| 1760 else | |
| 1761 Settings.safetystopDuration = 0; | |
| 1762 break; | |
| 1763 case 0x37: | |
| 1764 return ERROR_; | |
| 1765 case 0x38: | |
| 1766 if(!checkValue(data[1],0,1)) | |
| 1767 return ERROR_; | |
| 1768 Settings.fallbackToFixedSetpoint = data[1]; | |
| 1769 break; | |
| 1770 case 0x39: | |
| 1771 return ERROR_; | |
| 1772 case 0x3A: | |
| 1773 if(!checkValue(data[1],70,110)) | |
| 1774 return ERROR_; | |
| 1775 newSensitivity = data[1]; | |
| 1776 settingsHelperButtonSens_keepPercentageValues(newSensitivity, settingsGetPointer()->ButtonResponsiveness); | |
| 1777 setButtonResponsiveness(Settings.ButtonResponsiveness); | |
| 1778 break; | |
| 1779 case 0x3B: | |
| 1780 // value between 0 and 127 | |
| 1781 if(buttonBalanceTranslatorHexToArray(data[1], settingsGetPointer()->buttonBalance)) | |
| 1782 { | |
| 1783 settingsHelperButtonSens_keepPercentageValues(settingsGetPointer()->ButtonResponsiveness[3], settingsGetPointer()->ButtonResponsiveness); | |
| 1784 } | |
| 1785 else // value >= 128 (bit 7 set) factory reset | |
| 1786 { | |
| 1787 getButtonFactorDefaults(&settingsGetPointer()->ButtonResponsiveness[3], settingsGetPointer()->buttonBalance); | |
| 1788 settingsHelperButtonSens_keepPercentageValues(settingsGetPointerStandard()->ButtonResponsiveness[3], settingsGetPointer()->ButtonResponsiveness); | |
| 1789 } | |
| 1790 // valid for both: | |
| 1791 setButtonResponsiveness(Settings.ButtonResponsiveness); | |
| 1792 break; | |
| 1793 case 0x3C: | |
| 1794 if(!checkValue(data[1],5,50)) | |
| 1795 return ERROR_; | |
| 1796 Settings.gasConsumption_bottom_l_min = data[1]; | |
| 1797 break; | |
| 1798 case 0x3D: | |
| 1799 if(!checkValue(data[1],5,50)) | |
| 1800 return ERROR_; | |
| 1801 Settings.gasConsumption_deco_l_min = data[1]; | |
| 1802 break; | |
| 1803 case 0x3E: | |
| 1804 if(!checkValue(data[1],5,50)) | |
| 1805 return ERROR_; | |
| 1806 Settings.gasConsumption_travel_l_min = data[1]; | |
| 1807 break; | |
| 1808 case 0x3F: | |
| 1809 case 0x40: | |
| 1810 return ERROR_; | |
| 1811 case 0x41: | |
| 1812 if(!checkValue(data[1],0,1)) | |
| 1813 return ERROR_; | |
| 1814 Settings.alwaysShowPPO2 = data[1]; | |
| 1815 break; | |
| 1816 case 0x42: | |
| 1817 if(data[1] & 0x80) | |
| 1818 { | |
| 1819 data[1] = ~(data[1]); | |
| 1820 if(!checkValue(data[1],0,20)) | |
| 1821 return ERROR_; | |
| 1822 Settings.offsetTemperature_centigrad = 0 - data[1]; | |
| 1823 } | |
| 1824 else | |
| 1825 { | |
| 1826 if(!checkValue(data[1],0,20)) | |
| 1827 return ERROR_; | |
| 1828 Settings.offsetTemperature_centigrad = data[1]; | |
| 1829 } | |
| 1830 break; | |
| 1831 case 0x43: | |
| 1832 if(!checkValue(data[1],60,255)) | |
| 1833 return ERROR_; | |
| 1834 newDuration = (uint16_t)data[1] + 59; | |
| 1835 newDuration /= 60; | |
| 1836 Settings.safetystopDuration = (uint8_t)newDuration; | |
| 1837 break; | |
| 1838 case 0x44: | |
| 1839 if(!checkValue(data[1],21,61)) | |
| 1840 return ERROR_; | |
| 1841 newStopDepth = data[1] + 9; | |
| 1842 if(newStopDepth > 60) | |
| 1843 newStopDepth = 60; | |
| 1844 newStopDepth /= 10; | |
| 1845 Settings.safetystopDepth = newStopDepth; | |
| 1846 break; | |
| 1847 case 0x45: | |
| 1848 case 0x46: | |
| 1849 return ERROR_; | |
| 1850 case 0x47: | |
| 1851 newOffset = data[2] * 256; | |
| 1852 newOffset += data[1]; | |
| 1853 if(newOffset > 9000) | |
| 1854 return ERROR_; | |
| 1855 Settings.logbookOffset = newOffset; | |
| 1856 break; | |
| 1857 case 0x70: | |
| 1858 if(!checkValue(data[1],0,1)) | |
| 1859 return ERROR_; | |
| 1860 Settings.showDebugInfo = data[1]; | |
| 1861 break; | |
| 1862 case 0x71: | |
| 1863 if(!checkValue(data[1],0,(EXTRADISPLAY_END - 1))) | |
| 1864 return ERROR_; | |
| 1865 Settings.extraDisplay = data[1]; | |
| 1866 break; | |
| 1867 case 0x72: | |
| 1868 if(!checkValue(data[1],0,8)) | |
| 1869 return ERROR_; | |
| 1870 Settings.tX_customViewPrimary = data[1]; | |
| 1871 break; | |
| 1872 case 0x73: | |
| 1873 if(!checkValue(data[1],0,20)) | |
| 1874 return ERROR_; | |
| 1875 Settings.tX_customViewTimeout = data[1]; | |
| 1876 break; | |
| 1877 case 0x74: | |
| 1878 if(!checkValue(data[1],1,7)) | |
| 1879 return ERROR_; | |
| 1880 Settings.tX_userselectedLeftLowerCornerPrimary = data[1]; | |
| 1881 break; | |
| 1882 case 0x75: | |
| 1883 if(!checkValue(data[1],0,20)) | |
| 1884 return ERROR_; | |
| 1885 Settings.tX_userselectedLeftLowerCornerTimeout = data[1]; | |
| 1886 break; | |
| 1887 } | |
| 1888 return 0; | |
| 1889 } | |
| 1890 | |
| 1891 | |
| 1892 uint8_t readDataLimits__8and16BitValues_4and7BytesOutput(uint8_t what, uint8_t * data) | |
| 1893 { | |
| 1894 enum JeanDoParameterType { | |
| 1895 PARAM_UNKNOWN = 0, | |
| 1896 PARAM_INT15 = 1, | |
| 1897 PARAM_INT8, | |
| 1898 PARAM_DECI, | |
| 1899 PARAM_CENTI, | |
| 1900 PARAM_MILI, | |
| 1901 PARAM_PERCENT, | |
| 1902 PARAM_SEC, | |
| 1903 PARAM_COLOR, | |
| 1904 PARAM_BOOL, | |
| 1905 PARAM_ENUM, | |
| 1906 PARAM_SIGNED = 128, | |
| 1907 PARAM_SDECI = PARAM_SIGNED|PARAM_DECI, | |
| 1908 PARAM_SSEC = PARAM_SIGNED|PARAM_SEC, | |
| 1909 PARAM_SINT = PARAM_SIGNED|PARAM_INT8 | |
| 1910 }; | |
| 1911 | |
| 1912 // uint32_t buttonSensitivity; | |
| 1913 uint16_t newDuration; | |
| 1914 | |
| 1915 uint8_t datacounter = 0; | |
| 1916 | |
| 1917 data[0] = 0; | |
| 1918 data[1] = 0; | |
| 1919 data[2] = 0; | |
| 1920 data[3] = 0; | |
| 1921 datacounter = 0; | |
| 1922 | |
| 1923 switch(what) | |
| 1924 { | |
| 1925 case 0x10: | |
| 1926 case 0x11: | |
| 1927 case 0x12: | |
| 1928 case 0x13: | |
| 1929 case 0x14: | |
| 1930 data[datacounter++] = PARAM_INT8; | |
| 1931 data[datacounter++] = 4; | |
| 1932 data[datacounter++] = settingsGetPointerStandard()->gas[1].oxygen_percentage; | |
| 1933 data[datacounter++] = 100; | |
| 1934 break; | |
| 1935 | |
| 1936 case 0x15: | |
| 1937 case 0x16: | |
| 1938 case 0x17: | |
| 1939 case 0x18: | |
| 1940 case 0x19: | |
| 1941 data[datacounter++] = PARAM_INT8; | |
| 1942 data[datacounter++] = 4; | |
| 1943 data[datacounter++] = settingsGetPointerStandard()->gas[1].oxygen_percentage; | |
| 1944 data[datacounter++] = 100; | |
| 1945 break; | |
| 1946 | |
| 1947 case 0x1A: | |
| 1948 case 0x1B: | |
| 1949 case 0x1C: | |
| 1950 case 0x1D: | |
| 1951 case 0x1E: | |
| 1952 data[datacounter++] = PARAM_CENTI; | |
| 1953 data[datacounter++] = 50; | |
| 1954 data[datacounter++] = settingsGetPointerStandard()->setpoint[1].setpoint_cbar; | |
| 1955 data[datacounter++] = 160; | |
| 1956 break; | |
| 1957 | |
| 1958 case 0x1F: | |
| 1959 data[datacounter++] = PARAM_ENUM; | |
| 1960 data[datacounter++] = 0; | |
| 1961 data[datacounter++] = settingsGetPointerStandard()->CCR_Mode; | |
| 1962 data[datacounter++] = 1; | |
| 1963 break; | |
| 1964 | |
| 1965 case 0x20: | |
| 1966 data[datacounter++] = PARAM_ENUM; | |
| 1967 data[datacounter++] = 0; | |
| 1968 data[datacounter++] = settingsGetPointerStandard()->dive_mode; | |
| 1969 data[datacounter++] = 3; | |
| 1970 break; | |
| 1971 | |
| 1972 case 0x21: | |
| 1973 data[datacounter++] = PARAM_ENUM; | |
| 1974 data[datacounter++] = 1; | |
| 1975 data[datacounter++] = settingsGetPointerStandard()->deco_type.ub.standard; | |
| 1976 data[datacounter++] = 2; | |
| 1977 break; | |
| 1978 | |
| 1979 case 0x22: | |
| 1980 data[datacounter++] = PARAM_CENTI; | |
| 1981 data[datacounter++] = 100; | |
| 1982 data[datacounter++] = settingsGetPointerStandard()->ppO2_max_std; | |
| 1983 data[datacounter++] = 190; | |
| 1984 break; | |
| 1985 | |
| 1986 case 0x23: | |
| 1987 data[datacounter++] = PARAM_CENTI; | |
| 1988 data[datacounter++] = 15; | |
| 1989 data[datacounter++] = settingsGetPointerStandard()->ppO2_min; | |
| 1990 data[datacounter++] = 15; | |
| 1991 break; | |
| 1992 | |
| 1993 case 0x24: | |
| 1994 data[datacounter++] = PARAM_INT8; // minutes | |
| 1995 data[datacounter++] = 0; | |
| 1996 data[datacounter++] = settingsGetPointerStandard()->future_TTS; | |
| 1997 data[datacounter++] = 15; | |
| 1998 break; | |
| 1999 | |
| 2000 case 0x25: | |
| 2001 data[datacounter++] = PARAM_PERCENT; | |
| 2002 data[datacounter++] = 10; | |
| 2003 data[datacounter++] = settingsGetPointerStandard()->GF_low; | |
| 2004 data[datacounter++] = 99; | |
| 2005 break; | |
| 2006 | |
| 2007 case 0x26: | |
| 2008 data[datacounter++] = PARAM_PERCENT; | |
| 2009 data[datacounter++] = 45; | |
| 2010 data[datacounter++] = settingsGetPointerStandard()->GF_high; | |
| 2011 data[datacounter++] = 99; | |
| 2012 break; | |
| 2013 | |
| 2014 case 0x27: | |
| 2015 data[datacounter++] = PARAM_PERCENT; | |
| 2016 data[datacounter++] = 10; | |
| 2017 data[datacounter++] = settingsGetPointerStandard()->aGF_low; | |
| 2018 data[datacounter++] = 99; | |
| 2019 break; | |
| 2020 | |
| 2021 case 0x28: | |
| 2022 data[datacounter++] = PARAM_PERCENT; | |
| 2023 data[datacounter++] = 45; | |
| 2024 data[datacounter++] = settingsGetPointerStandard()->aGF_high; | |
| 2025 data[datacounter++] = 99; | |
| 2026 break; | |
| 2027 | |
| 2028 case 0x29: | |
| 2029 data[datacounter++] = PARAM_INT8; // conservatism +0 .. +5 | |
| 2030 data[datacounter++] = 0; | |
| 2031 data[datacounter++] = settingsGetPointerStandard()->VPM_conservatism.ub.standard; | |
| 2032 data[datacounter++] = 5; | |
| 2033 break; | |
| 2034 | |
| 2035 case 0x2A: | |
| 2036 case 0x2B: | |
| 2037 data[datacounter++] = PARAM_PERCENT; | |
| 2038 data[datacounter++] = 100; | |
| 2039 data[datacounter++] = 100;// saturation, desaturation, settingsGetPointerStandard()->; | |
| 2040 data[datacounter++] = 100; | |
| 2041 break; | |
| 2042 | |
| 2043 case 0x2C: | |
| 2044 data[datacounter++] = PARAM_INT8; | |
| 2045 data[datacounter++] = 3; | |
| 2046 data[datacounter++] = settingsGetPointerStandard()->last_stop_depth_meter; | |
| 2047 data[datacounter++] = 9; | |
| 2048 break; | |
| 2049 | |
| 2050 case 0x2D: | |
| 2051 data[datacounter++] = PARAM_ENUM; | |
| 2052 data[datacounter++] = 0; | |
| 2053 data[datacounter++] = settingsGetPointerStandard()->brightness; | |
| 2054 data[datacounter++] = 4; | |
| 2055 break; | |
| 2056 | |
| 2057 case 0x2E: | |
| 2058 data[datacounter++] = PARAM_ENUM; | |
| 2059 data[datacounter++] = 0; | |
| 2060 data[datacounter++] = settingsGetPointerStandard()->nonMetricalSystem; | |
| 2061 data[datacounter++] = 1; | |
| 2062 break; | |
| 2063 | |
| 2064 case 0x2F: | |
| 2065 data[datacounter++] = PARAM_INT8; // Sampling rate logbook | |
| 2066 data[datacounter++] = 2; | |
| 2067 data[datacounter++] = 2; | |
| 2068 data[datacounter++] = 2; | |
| 2069 break; | |
| 2070 | |
| 2071 case 0x30: | |
| 2072 data[datacounter++] = PARAM_PERCENT; | |
| 2073 data[datacounter++] = 0; | |
| 2074 data[datacounter++] = settingsGetPointerStandard()->salinity; | |
| 2075 data[datacounter++] = 4; | |
| 2076 break; | |
| 2077 | |
| 2078 case 0x31: | |
| 2079 data[datacounter++] = PARAM_INT8; | |
| 2080 data[datacounter++] = 0; | |
| 2081 data[datacounter++] = settingsGetPointerStandard()->tX_colorscheme; | |
| 2082 data[datacounter++] = 3; | |
| 2083 break; | |
| 2084 | |
| 2085 case 0x32: | |
| 2086 data[datacounter++] = PARAM_ENUM; | |
| 2087 data[datacounter++] = 0; | |
| 2088 data[datacounter++] = settingsGetPointerStandard()->selected_language; | |
| 2089 data[datacounter++] = 1; | |
| 2090 break; | |
| 2091 | |
| 2092 case 0x33: | |
| 2093 data[datacounter++] = PARAM_ENUM; | |
| 2094 data[datacounter++] = 0; | |
| 2095 data[datacounter++] = settingsGetPointerStandard()->date_format; | |
| 2096 data[datacounter++] = 2; | |
| 2097 break; | |
| 2098 | |
| 2099 case 0x34: | |
| 2100 data[datacounter++] = PARAM_UNKNOWN ; | |
| 2101 data[datacounter++] = 0; | |
| 2102 data[datacounter++] = 0; // compass gain, is unknown,, settingsGetPointerStandard()->; | |
| 2103 data[datacounter++] = 0; | |
| 2104 break; | |
| 2105 | |
| 2106 case 0x35: | |
| 2107 data[datacounter++] = PARAM_SINT; | |
|
337
38367bb982b8
Set Max value for pressure offset to 50mBar (20mBar before)
ideenmodellierer
parents:
334
diff
changeset
|
2108 data[datacounter++] = (uint8_t)(256 - PRESSURE_OFFSET_LIMIT_MBAR); // == -20 |
| 38 | 2109 if(settingsGetPointerStandard()->offsetPressure_mbar < 0) |
| 2110 data[datacounter++] = (uint8_t)(127 - settingsGetPointerStandard()->offsetPressure_mbar); | |
| 2111 else | |
| 2112 data[datacounter++] = settingsGetPointerStandard()->offsetPressure_mbar; | |
|
337
38367bb982b8
Set Max value for pressure offset to 50mBar (20mBar before)
ideenmodellierer
parents:
334
diff
changeset
|
2113 data[datacounter++] = PRESSURE_OFFSET_LIMIT_MBAR; |
| 38 | 2114 break; |
| 2115 | |
| 2116 case 0x36: | |
| 2117 data[datacounter++] = PARAM_BOOL; | |
| 2118 data[datacounter++] = 0; | |
| 2119 if(settingsGetPointerStandard()->safetystopDuration) | |
| 2120 data[datacounter++] = 1; | |
| 2121 else | |
| 2122 data[datacounter++] = 0; | |
| 2123 data[datacounter++] = 1; | |
| 2124 break; | |
| 2125 | |
| 2126 case 0x37: | |
| 2127 data[datacounter++] = PARAM_UNKNOWN ; | |
| 2128 data[datacounter++] = 0; | |
| 2129 data[datacounter++] = 0; // Set calibration gas, not possible with optical | |
| 2130 data[datacounter++] = 0; | |
| 2131 break; | |
| 2132 | |
| 2133 case 0x38: | |
| 2134 data[datacounter++] = PARAM_BOOL; | |
| 2135 data[datacounter++] = 0; | |
| 2136 data[datacounter++] = settingsGetPointerStandard()->fallbackToFixedSetpoint; | |
| 2137 data[datacounter++] = 1; | |
| 2138 break; | |
| 2139 | |
| 2140 case 0x39: | |
| 2141 data[datacounter++] = PARAM_BOOL; | |
| 2142 data[datacounter++] = 0; | |
| 2143 data[datacounter++] = 0; // flipscreen, not yet :-) settingsGetPointerStandard()->; | |
| 2144 data[datacounter++] = 0; | |
| 2145 break; | |
| 2146 | |
| 2147 case 0x3A: | |
| 2148 data[datacounter++] = PARAM_PERCENT; | |
| 2149 data[datacounter++] = 70; | |
| 2150 data[datacounter++] = settingsGetPointerStandard()->ButtonResponsiveness[3]; | |
| 2151 data[datacounter++] = 110; | |
| 2152 break; | |
| 2153 | |
| 2154 case 0x3B: | |
| 2155 data[datacounter++] = PARAM_UNKNOWN; | |
| 2156 data[datacounter++] = 0; | |
| 2157 data[datacounter++] = buttonBalanceTranslateArrayOutHex(settingsGetPointerStandard()->buttonBalance); | |
| 2158 data[datacounter++] = 128; | |
| 2159 break; | |
| 2160 | |
| 2161 case 0x3C: | |
| 2162 data[datacounter++] = PARAM_INT8; | |
| 2163 data[datacounter++] = 5; | |
| 2164 data[datacounter++] = settingsGetPointerStandard()->gasConsumption_bottom_l_min; | |
| 2165 data[datacounter++] = 50; | |
| 2166 break; | |
| 2167 | |
| 2168 case 0x3D: | |
| 2169 data[datacounter++] = PARAM_INT8; | |
| 2170 data[datacounter++] = 5; | |
| 2171 data[datacounter++] = settingsGetPointerStandard()->gasConsumption_deco_l_min; | |
| 2172 data[datacounter++] = 50; | |
| 2173 break; | |
| 2174 | |
| 2175 case 0x3E: | |
| 2176 data[datacounter++] = PARAM_INT8; | |
| 2177 data[datacounter++] = 5; | |
| 2178 data[datacounter++] = settingsGetPointerStandard()->gasConsumption_travel_l_min; | |
| 2179 data[datacounter++] = 50; | |
| 2180 break; | |
| 2181 | |
| 2182 case 0x3F: | |
| 2183 data[datacounter++] = PARAM_UNKNOWN; | |
| 2184 data[datacounter++] = 0; | |
| 2185 data[datacounter++] = 0; // Dynamic ascend rate, not yet :-) settingsGetPointerStandard()->; | |
| 2186 data[datacounter++] = 0; | |
| 2187 break; | |
| 2188 | |
| 2189 case 0x40: | |
| 2190 data[datacounter++] = PARAM_BOOL; | |
| 2191 data[datacounter++] = 1; | |
| 2192 data[datacounter++] = 1; // Graphical speed indicator; | |
| 2193 data[datacounter++] = 1; | |
| 2194 break; | |
| 2195 | |
| 2196 case 0x41: | |
| 2197 data[datacounter++] = PARAM_BOOL; | |
| 2198 data[datacounter++] = 0; | |
| 2199 data[datacounter++] = settingsGetPointerStandard()->alwaysShowPPO2; | |
| 2200 data[datacounter++] = 1; | |
| 2201 break; | |
| 2202 | |
| 2203 case 0x42: | |
| 2204 data[datacounter++] = PARAM_SIGNED|PARAM_CENTI; | |
| 2205 data[datacounter++] = (uint8_t)(256 - 20); // == -20 | |
| 2206 if(settingsGetPointerStandard()->offsetTemperature_centigrad < 0) | |
| 2207 data[datacounter++] = (uint8_t)(127 - settingsGetPointerStandard()->offsetTemperature_centigrad); | |
| 2208 else | |
| 2209 data[datacounter++] = settingsGetPointerStandard()->offsetTemperature_centigrad; | |
| 2210 data[datacounter++] = 20; | |
| 2211 break; | |
| 2212 | |
| 2213 case 0x43: | |
| 2214 newDuration = settingsGetPointerStandard()->safetystopDuration; | |
| 2215 newDuration *= 60; | |
| 2216 if(newDuration > 255) | |
| 2217 newDuration = 255; | |
| 2218 data[datacounter++] = PARAM_INT8; | |
| 2219 data[datacounter++] = 60; // coud be 1 minute instead | |
| 2220 data[datacounter++] = (uint8_t)newDuration; | |
| 2221 data[datacounter++] = 255; // could be 5 minutes instead | |
| 2222 break; | |
| 2223 | |
| 2224 case 0x44: | |
| 2225 data[datacounter++] = PARAM_INT8; | |
| 2226 data[datacounter++] = 30; // coud be 3 meter instead | |
| 2227 data[datacounter++] = settingsGetPointerStandard()->safetystopDepth * 10; | |
| 2228 data[datacounter++] = 60; // could be 6 meter instead | |
| 2229 break; | |
| 2230 | |
| 2231 case 0x45: | |
| 2232 case 0x46: | |
| 2233 data[datacounter++] = PARAM_UNKNOWN; | |
| 2234 data[datacounter++] = 0; | |
| 2235 data[datacounter++] = 0; // SafetyStop End Depth and SafetyStop Reset Depth | |
| 2236 data[datacounter++] = 0; | |
| 2237 break; | |
| 2238 | |
| 2239 case 0x47: | |
| 2240 data[datacounter++] = PARAM_INT15; | |
| 2241 data[datacounter++] = 0; | |
| 2242 data[datacounter++] = 0; | |
| 2243 data[datacounter++] = settingsGetPointerStandard()->logbookOffset & 0xFF; | |
| 2244 data[datacounter++] = settingsGetPointerStandard()->logbookOffset / 0xFF; | |
| 2245 data[datacounter++] = 9000 & 0xFF; | |
| 2246 data[datacounter++] = 9000 / 0xFF; | |
| 2247 break; | |
| 2248 | |
| 2249 case 0x70: | |
| 2250 data[datacounter++] = PARAM_BOOL; | |
| 2251 data[datacounter++] = 0; | |
| 2252 data[datacounter++] = settingsGetPointerStandard()->showDebugInfo; | |
| 2253 data[datacounter++] = 1; | |
| 2254 break; | |
| 2255 | |
| 2256 case 0x71: | |
| 2257 data[datacounter++] = PARAM_ENUM; | |
| 2258 data[datacounter++] = 0; | |
| 2259 data[datacounter++] = settingsGetPointerStandard()->extraDisplay; | |
| 2260 data[datacounter++] = (EXTRADISPLAY_END - 1); | |
| 2261 break; | |
| 2262 | |
| 2263 case 0x72: | |
| 2264 data[datacounter++] = PARAM_ENUM; | |
| 2265 data[datacounter++] = 0; | |
| 2266 data[datacounter++] = settingsGetPointerStandard()->tX_customViewPrimary; | |
| 2267 data[datacounter++] = 8; | |
| 2268 break; | |
| 2269 | |
| 2270 case 0x73: | |
| 2271 data[datacounter++] = PARAM_INT8; | |
| 2272 data[datacounter++] = 0; | |
| 2273 data[datacounter++] = settingsGetPointerStandard()->tX_customViewTimeout; | |
| 2274 data[datacounter++] = 60; | |
| 2275 break; | |
| 2276 | |
| 2277 case 0x74: | |
| 2278 data[datacounter++] = PARAM_ENUM; | |
| 2279 data[datacounter++] = 1; | |
| 2280 data[datacounter++] = settingsGetPointerStandard()->tX_userselectedLeftLowerCornerPrimary; | |
| 2281 data[datacounter++] = 7; | |
| 2282 break; | |
| 2283 | |
| 2284 case 0x75: | |
| 2285 data[datacounter++] = PARAM_INT8; | |
| 2286 data[datacounter++] = 0; | |
| 2287 data[datacounter++] = settingsGetPointerStandard()->tX_userselectedLeftLowerCornerTimeout; | |
| 2288 data[datacounter++] = 60; | |
| 2289 break; | |
| 2290 } | |
| 2291 | |
| 2292 if(datacounter == 0) | |
| 2293 { | |
| 2294 data[datacounter++] = PARAM_UNKNOWN; | |
| 2295 data[datacounter++] = 0; | |
| 2296 data[datacounter++] = 0; // SafetyStop End Depth and SafetyStop Reset Depth | |
| 2297 data[datacounter++] = 0; | |
| 2298 } | |
| 2299 | |
| 2300 return datacounter; | |
| 2301 } | |
| 2302 | |
| 2303 | |
| 2304 uint8_t readData(uint8_t what, uint8_t * data) | |
| 2305 { | |
| 2306 data[0] = 0; | |
| 2307 data[1] = 0; | |
| 2308 data[2] = 0; | |
| 2309 data[3] = 0; | |
| 2310 switch(what) | |
| 2311 { | |
| 2312 case 0x10: | |
| 2313 return getGas(1,data); | |
| 2314 case 0x11: | |
| 2315 return getGas(2,data); | |
| 2316 case 0x12: | |
| 2317 return getGas(3,data); | |
| 2318 case 0x13: | |
| 2319 return getGas(4,data); | |
| 2320 case 0x14: | |
| 2321 return getGas(5,data); | |
| 2322 case 0x15: | |
| 2323 return getDiluent(1,data); | |
| 2324 case 0x16: | |
| 2325 return getDiluent(2,data); | |
| 2326 case 0x17: | |
| 2327 return getDiluent(3,data); | |
| 2328 case 0x18: | |
| 2329 return getDiluent(4,data); | |
| 2330 case 0x19: | |
| 2331 return getDiluent(5,data); | |
| 2332 case 0x1A: | |
| 2333 return getSetpoint(1,data); | |
| 2334 case 0x1B: | |
| 2335 return getSetpoint(2,data); | |
| 2336 case 0x1C: | |
| 2337 return getSetpoint(3,data); | |
| 2338 case 0x1D: | |
| 2339 return getSetpoint(4,data); | |
| 2340 case 0x1E: | |
| 2341 return getSetpoint(5,data); | |
| 2342 case 0x1F: | |
| 2343 data[0] = Settings.CCR_Mode; | |
| 2344 break; | |
| 2345 case 0x20: | |
| 2346 data[0] = Settings.dive_mode; | |
| 2347 break; | |
| 2348 case 0x21: | |
| 2349 data[0] = Settings.deco_type.ub.standard; | |
| 2350 break; | |
| 2351 case 0x22: | |
| 2352 data[0] = Settings.ppO2_max_std; | |
| 2353 break; | |
| 2354 case 0x23: | |
| 2355 data[0] = Settings.ppO2_min; | |
| 2356 break; | |
| 2357 case 0x24: | |
| 2358 data[0] = Settings.future_TTS; | |
| 2359 break; | |
| 2360 case 0x25: | |
| 2361 data[0] = Settings.GF_low; | |
| 2362 break; | |
| 2363 case 0x26: | |
| 2364 data[0] = Settings.GF_high; | |
| 2365 break; | |
| 2366 case 0x27: | |
| 2367 data[0] = Settings.aGF_low; | |
| 2368 break; | |
| 2369 case 0x28: | |
| 2370 data[0] = Settings.aGF_high; | |
| 2371 break; | |
| 2372 case 0x29: | |
| 2373 data[0] = Settings.VPM_conservatism.ub.standard; | |
| 2374 break; | |
| 2375 case 0x2A: | |
| 2376 case 0x2B: | |
| 2377 data[0] = 100; | |
| 2378 break; | |
| 2379 case 0x2C: | |
| 2380 data[0] = Settings.last_stop_depth_meter; | |
| 2381 break; | |
| 2382 case 0x2D: | |
| 2383 data[0] = Settings.brightness; | |
| 2384 break; | |
| 2385 case 0x2E: | |
| 2386 data[0] = Settings.nonMetricalSystem; | |
| 2387 break; | |
| 2388 case 0x2F: | |
| 2389 data[0] = 0; // 0 == 2 sec sampling rate | |
| 2390 break; | |
| 2391 case 0x30: | |
| 2392 data[0] = Settings.salinity; | |
| 2393 break; | |
| 2394 case 0x31: | |
| 2395 data[0] = Settings.tX_colorscheme; | |
| 2396 break; | |
| 2397 case 0x32: | |
| 2398 data[0] = Settings.selected_language; | |
| 2399 break; | |
| 2400 case 0x33: | |
| 2401 data[0] = Settings.date_format; | |
| 2402 break; | |
| 2403 case 0x34: | |
| 2404 data[0] = 7; // gain should be always 7 as far as I understand the code in RTE | |
| 2405 break; | |
| 2406 case 0x35: | |
| 2407 data[0] = Settings.offsetPressure_mbar; | |
| 2408 break; | |
| 2409 case 0x36: | |
| 2410 if(Settings.safetystopDepth) | |
| 2411 data[0] = 1; | |
| 2412 else | |
| 2413 data[0] = 0; | |
| 2414 break; | |
| 2415 case 0x37: | |
| 2416 data[0] = 0; // calibration gas %O2 -> 0 no gas :-) | |
| 2417 break; | |
| 2418 case 0x38: | |
| 2419 data[0] = Settings.fallbackToFixedSetpoint; | |
| 2420 break; | |
| 2421 case 0x39: | |
| 2422 data[0] = 0; // flip screen | |
| 2423 break; | |
| 2424 case 0x3A: | |
| 2425 data[0] = Settings.ButtonResponsiveness[3]; | |
| 2426 break; | |
| 2427 case 0x3B: | |
| 2428 data[0] = buttonBalanceTranslateArrayOutHex(settingsGetPointer()->buttonBalance); | |
| 2429 break; | |
| 2430 case 0x3C: | |
| 2431 data[0] = Settings.gasConsumption_bottom_l_min; | |
| 2432 break; | |
| 2433 case 0x3D: | |
| 2434 data[0] = Settings.gasConsumption_deco_l_min; | |
| 2435 break; | |
| 2436 case 0x3E: | |
| 2437 data[0] = Settings.gasConsumption_travel_l_min; | |
| 2438 break; | |
| 2439 case 0x3F: | |
| 2440 data[0] = 0; // fixed ascend rate 10 m/min | |
| 2441 break; | |
| 2442 case 0x40: | |
| 2443 data[0] = 1; // graphical speed indicator | |
| 2444 break; | |
| 2445 case 0x41: | |
| 2446 data[0] = Settings.alwaysShowPPO2; | |
| 2447 break; | |
| 2448 case 0x42: | |
| 2449 data[0] = Settings.offsetTemperature_centigrad; | |
| 2450 break; | |
| 2451 case 0x43: | |
| 2452 if(Settings.safetystopDuration > 4) | |
| 2453 data[0] = 255; // seconds | |
| 2454 else | |
| 2455 data[0] = 60 * Settings.safetystopDuration; | |
| 2456 break; | |
| 2457 case 0x44: | |
| 2458 data[0] = Settings.safetystopDepth * 10; // cbar instead of meter | |
| 2459 break; | |
| 2460 case 0x45: | |
| 2461 if(Settings.safetystopDepth == 3) | |
| 2462 data[0] = 20; // cbar | |
| 2463 else | |
| 2464 data[0] = 30; // cbar | |
| 2465 break; | |
| 2466 case 0x46: | |
| 2467 data[0] = 10; // reset at 10 meter as far as I understood | |
| 2468 break; | |
| 2469 case 0x47: | |
| 2470 data[0] = Settings.logbookOffset & 0xFF; | |
| 2471 data[1] = Settings.logbookOffset / 0xFF; | |
| 2472 break; | |
| 2473 case 0x70: | |
| 2474 data[0] = Settings.showDebugInfo; | |
| 2475 break; | |
| 2476 case 0x71: | |
| 2477 data[0] = Settings.extraDisplay; | |
| 2478 break; | |
| 2479 case 0x72: | |
| 2480 data[0] = Settings.tX_customViewPrimary; | |
| 2481 break; | |
| 2482 case 0x73: | |
| 2483 data[0] = Settings.tX_customViewTimeout; | |
| 2484 break; | |
| 2485 case 0x74: | |
| 2486 data[0] = Settings.tX_userselectedLeftLowerCornerPrimary; | |
| 2487 break; | |
| 2488 case 0x75: | |
| 2489 data[0] = Settings.tX_userselectedLeftLowerCornerTimeout; | |
| 2490 break; | |
| 2491 } | |
| 2492 return 0x4D; | |
| 2493 } | |
| 2494 | |
| 2495 | |
| 2496 uint8_t RTEminimum_required_high(void) | |
| 2497 { | |
| 2498 return RTErequiredHigh; | |
| 2499 } | |
| 2500 uint8_t RTEminimum_required_low(void) | |
| 2501 { | |
| 2502 return RTErequiredLow; | |
| 2503 } | |
| 2504 | |
| 2505 uint8_t FONTminimum_required_high(void) | |
| 2506 { | |
| 2507 return FONTrequiredHigh; | |
| 2508 } | |
| 2509 uint8_t FONTminimum_required_low(void) | |
| 2510 { | |
| 2511 return FONTrequiredLow; | |
| 2512 } | |
| 2513 | |
| 2514 | |
| 2515 void setActualRTEversion(uint8_t high, uint8_t low) | |
| 2516 { | |
| 2517 RTEactualHigh = high; | |
| 2518 RTEactualLow = low; | |
| 2519 } | |
| 2520 | |
| 2521 | |
| 2522 void getActualRTEandFONTversion(uint8_t *RTEhigh, uint8_t *RTElow, uint8_t *FONThigh, uint8_t *FONTlow) | |
| 2523 { | |
| 2524 if(RTEhigh && RTElow) | |
| 2525 { | |
| 2526 *RTEhigh = RTEactualHigh; | |
| 2527 *RTElow = RTEactualLow; | |
| 2528 } | |
| 2529 if(FONThigh && FONTlow) | |
| 2530 { | |
| 2531 *FONThigh = *(uint8_t *)0x08132000; | |
| 2532 *FONTlow = *(uint8_t *)0x08132001; | |
| 2533 } | |
| 2534 } | |
| 2535 | |
| 2536 | |
| 2537 uint8_t getLicence(void) | |
| 2538 { | |
| 2539 return hardwareDataGetPointer()->primaryLicence; | |
| 2540 } | |
| 2541 | |
| 2542 | |
| 2543 void firmwareGetDate(RTC_DateTypeDef *SdateOutput) | |
| 2544 { | |
| 2545 SdateOutput->Year = firmwareDataGetPointer()->release_year; | |
| 2546 SdateOutput->Month = firmwareDataGetPointer()->release_month; | |
| 2547 SdateOutput->Date = firmwareDataGetPointer()->release_day; | |
| 2548 } | |
| 2549 | |
| 2550 | |
| 2551 // this should use device specific values stored in OTPROG ROM soon | |
| 2552 void getButtonFactorDefaults(uint8_t* basePercentage, uint8_t* buttonBalanceArray) | |
| 2553 { | |
| 2554 *basePercentage = settingsGetPointerStandard()->ButtonResponsiveness[3]; | |
| 2555 | |
| 2556 for(int i=0;i<3;i++) | |
| 2557 { | |
| 2558 buttonBalanceArray[i] = settingsGetPointerStandard()->buttonBalance[i]; | |
| 2559 } | |
| 2560 } | |
| 2561 | |
| 2562 | |
| 2563 uint8_t buttonBalanceTranslatorHexToArray(uint8_t hexValue, uint8_t* outputArray) | |
| 2564 { | |
| 2565 if(hexValue > 127) | |
| 2566 return 0; | |
| 2567 // internal order: 0 = right, 1 = center, 2 = left | |
| 2568 // external order: Factory,left,center,right | |
| 2569 outputArray[0] = 2 + (hexValue & 0x03); | |
| 2570 hexValue /= 4; | |
| 2571 outputArray[1] = 2 + (hexValue & 0x03); | |
| 2572 hexValue /= 4; | |
| 2573 outputArray[2] = 2 + (hexValue & 0x03); | |
| 2574 | |
| 2575 return 1; | |
| 2576 } | |
| 2577 | |
| 2578 | |
| 2579 uint8_t buttonBalanceTranslateArrayOutHex(const uint8_t* inputArray) | |
| 2580 { | |
| 2581 uint8_t hexValue = 0; | |
| 2582 | |
| 2583 if(inputArray[2] > 2) | |
| 2584 { | |
| 2585 hexValue += inputArray[2] - 2; | |
| 2586 } | |
| 2587 hexValue *= 4; | |
| 2588 | |
| 2589 if(inputArray[1] > 2) | |
| 2590 { | |
| 2591 hexValue += inputArray[1] - 2; | |
| 2592 } | |
| 2593 hexValue *= 4; | |
| 2594 if(inputArray[0] > 2) | |
| 2595 { | |
| 2596 hexValue += inputArray[0] - 2; | |
| 2597 } | |
| 2598 return hexValue; | |
| 2599 } | |
| 2600 | |
| 2601 void settingsWriteFactoryDefaults(uint8_t inputValueRaw, uint8_t *inputBalanceArray) | |
| 2602 { | |
| 2603 if((inputValueRaw >= 70) && (inputValueRaw <= 110)) | |
| 2604 { | |
| 2605 Settings.FactoryButtonBase = inputValueRaw; | |
| 2606 } | |
| 2607 for(int i=0;i<3;i++) | |
| 2608 { | |
| 2609 if((inputBalanceArray[i] >= 2) && (inputBalanceArray[i] <= 5)) | |
| 2610 { | |
| 2611 Settings.FactoryButtonBalance[i] = inputBalanceArray[i]; | |
| 2612 } | |
| 2613 } | |
| 2614 } | |
| 2615 | |
| 2616 | |
| 2617 /** | |
| 2618 ****************************************************************************** | |
| 2619 * @brief settingsHelperButtonSens. / make 32 bit input to three buttons + storage value in [3] | |
| 2620 * @author heinrichs weikamp gmbh | |
| 2621 * @version V 01 | |
| 2622 * @date 19-Sept-2016 | |
| 2623 ****************************************************************************** | |
| 2624 * | |
| 2625 * @param inputValueRaw: | |
| 2626 * @param outArray4Values: [0] is right, [1] is center, [2] is left, [3] is original value with zero balance | |
| 2627 * @retval None | |
| 2628 */ | |
| 2629 void settingsHelperButtonSens_keepPercentageValues(uint32_t inputValueRaw, uint8_t *outArray4Values) | |
| 2630 { | |
| 2631 uint32_t newSensitivity; | |
| 2632 | |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
2633 if(inputValueRaw > MAX_BUTTONRESPONSIVENESS) |
| 38 | 2634 { |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
2635 inputValueRaw = MAX_BUTTONRESPONSIVENESS; |
| 38 | 2636 } |
| 2637 else | |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
2638 if(inputValueRaw < MIN_BUTTONRESPONSIVENESS) |
| 38 | 2639 { |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
2640 inputValueRaw = MIN_BUTTONRESPONSIVENESS; |
| 38 | 2641 } |
| 2642 | |
| 2643 // the unbalanced value | |
| 2644 outArray4Values[3] = inputValueRaw; | |
| 2645 | |
| 2646 // the balanced values | |
| 2647 for(int i=0;i<3;i++) | |
| 2648 { | |
| 2649 newSensitivity = inputValueRaw; | |
| 2650 switch(settingsGetPointer()->buttonBalance[i]) | |
| 2651 { | |
| 2652 case 1: // should not be an option hw 170508 | |
| 2653 newSensitivity -= 20; | |
| 2654 break; | |
| 2655 case 2: | |
| 2656 newSensitivity -= 10; | |
| 2657 break; | |
| 2658 default: | |
| 2659 break; | |
| 2660 case 4: | |
| 2661 newSensitivity += 10; | |
| 2662 break; | |
| 2663 case 5: | |
| 2664 newSensitivity += 20; | |
| 2665 break; | |
| 2666 } | |
| 2667 | |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
2668 if(newSensitivity > MAX_BUTTONRESPONSIVENESS) |
| 38 | 2669 { |
|
92
be35821a4974
Stable to test. button sensitiveness fix. + global_constants.
Dmitry Romanov <kitt@bk.ru>
parents:
91
diff
changeset
|
2670 newSensitivity = MAX_BUTTONRESPONSIVENESS; |
| 38 | 2671 } |
| 2672 outArray4Values[i] = newSensitivity; | |
| 2673 } | |
| 2674 } | |
| 2675 | |
| 2676 | |
| 2677 /** | |
| 2678 ****************************************************************************** | |
| 2679 * @brief settingsHelperButtonSens_translate_to_hwOS_values. / make 32 bit input to three buttons + storage value in [3] | |
| 2680 * @author heinrichs weikamp gmbh | |
| 2681 * @version V 01 | |
| 2682 * @date 19-Sept-2016 | |
| 2683 ****************************************************************************** | |
| 2684 * | |
| 2685 * @param inputValueRaw: | |
| 2686 * @param outArray4Values: [0] is right, [1] is center, [2] is left, [3] is original value with zero balance | |
| 2687 * @retval None | |
| 2688 */ | |
| 2689 void settingsHelperButtonSens_original_translate_to_hwOS_values(const uint32_t inputValueRaw, uint8_t *outArray4Values) | |
| 2690 { | |
| 2691 uint32_t newSensitivity; | |
| 2692 | |
| 2693 for(int i=0;i<3;i++) | |
| 2694 { | |
| 2695 newSensitivity = inputValueRaw; | |
| 2696 switch(settingsGetPointer()->buttonBalance[i]) | |
| 2697 { | |
| 2698 case 1: | |
| 2699 newSensitivity -= 20; | |
| 2700 break; | |
| 2701 case 2: | |
| 2702 newSensitivity -= 10; | |
| 2703 break; | |
| 2704 default: | |
| 2705 break; | |
| 2706 case 4: | |
| 2707 newSensitivity += 10; | |
| 2708 break; | |
| 2709 case 5: | |
| 2710 newSensitivity += 20; | |
| 2711 break; | |
| 2712 } | |
| 2713 | |
| 2714 if(newSensitivity > 100) | |
| 2715 { | |
| 2716 if(newSensitivity <= 105) | |
| 2717 newSensitivity = 10; | |
| 2718 else | |
| 2719 newSensitivity = 7; | |
| 2720 } | |
| 2721 else | |
| 2722 { | |
| 2723 newSensitivity *= 24; | |
| 2724 newSensitivity = 2400 - newSensitivity; | |
| 2725 newSensitivity /= 10; | |
| 2726 | |
| 2727 newSensitivity += 15; | |
| 2728 if(newSensitivity > 255) | |
| 2729 newSensitivity = 255; | |
| 2730 } | |
| 2731 outArray4Values[i] = newSensitivity; | |
| 2732 } | |
| 2733 | |
| 2734 // the unbalanced value | |
| 2735 newSensitivity = inputValueRaw; | |
| 2736 if(newSensitivity > 100) | |
| 2737 { | |
| 2738 if(newSensitivity <= 105) | |
| 2739 newSensitivity = 10; | |
| 2740 else | |
| 2741 newSensitivity = 7; | |
| 2742 } | |
| 2743 else | |
| 2744 { | |
| 2745 newSensitivity *= 24; | |
| 2746 newSensitivity = 2400 - newSensitivity; | |
| 2747 newSensitivity /= 10; | |
| 2748 | |
| 2749 newSensitivity += 15; | |
| 2750 if(newSensitivity > 255) | |
| 2751 newSensitivity = 255; | |
| 2752 } | |
| 2753 outArray4Values[3] = newSensitivity; | |
| 2754 } | |
| 2755 | |
| 2756 | |
| 2757 /** | |
| 2758 ****************************************************************************** | |
| 2759 * @brief settingsHelperButtonSens_translate_percentage_to_hwOS_values. | |
| 2760 * @author heinrichs weikamp gmbh | |
| 2761 * @version V 01 | |
| 2762 * @date 6-March-2017 | |
| 2763 ****************************************************************************** | |
| 2764 * | |
| 2765 * @param inputValuePercentage with buttonBalance included | |
| 2766 * @retval PIC compatible value | |
| 2767 */ | |
| 2768 uint8_t settingsHelperButtonSens_translate_percentage_to_hwOS_values(uint8_t inputValuePercentage) | |
| 2769 { | |
| 2770 uint32_t newSensitivity = inputValuePercentage; | |
| 2771 | |
| 2772 if(newSensitivity > 100) | |
| 2773 { | |
| 2774 if(newSensitivity <= 105) | |
| 2775 newSensitivity = 10; | |
| 2776 else | |
| 2777 newSensitivity = 7; | |
| 2778 } | |
| 2779 else | |
| 2780 { | |
| 2781 newSensitivity *= 24; | |
| 2782 newSensitivity = 2400 - newSensitivity; | |
| 2783 newSensitivity /= 10; | |
| 2784 | |
| 2785 newSensitivity += 15; | |
| 2786 if(newSensitivity > 255) | |
| 2787 newSensitivity = 255; | |
| 2788 } | |
| 2789 return (uint8_t)newSensitivity; | |
| 2790 } | |
| 2791 | |
| 2792 | |
| 2793 /** | |
| 2794 ****************************************************************************** | |
| 2795 * @brief settingsHelperButtonSens_translate_hwOS_values_to_percentage. | |
| 2796 * @author heinrichs weikamp gmbh | |
| 2797 * @version V 01 | |
| 2798 * @date 6-March-2017 | |
| 2799 ****************************************************************************** | |
| 2800 * | |
| 2801 * @param PIC compatible value | |
| 2802 * @retval Percentage | |
| 2803 */ | |
| 2804 uint8_t settingsHelperButtonSens_translate_hwOS_values_to_percentage(uint8_t inputValuePIC) | |
| 2805 { | |
| 2806 if(inputValuePIC >= 15) | |
| 2807 { | |
| 2808 return(uint8_t)((25500 - (inputValuePIC)*100) / 240); | |
| 2809 } | |
| 2810 else | |
| 2811 { | |
| 2812 if(inputValuePIC >= 10) | |
| 2813 { | |
| 2814 return 105; | |
| 2815 } | |
| 2816 else | |
| 2817 { | |
| 2818 return 110; | |
| 2819 } | |
| 2820 } | |
| 2821 } |