|
5
|
1 /**
|
|
|
2 ******************************************************************************
|
|
|
3 * File Name : stm32f4xx_hal_msp.c
|
|
|
4 * Date : 04/12/2014 15:39:26
|
|
|
5 * Description : This file provides code for the MSP Initialization
|
|
|
6 * and de-Initialization codes.
|
|
|
7 ******************************************************************************
|
|
|
8 *
|
|
|
9 * COPYRIGHT(c) 2014 STMicroelectronics
|
|
|
10 *
|
|
|
11 * Redistribution and use in source and binary forms, with or without modification,
|
|
|
12 * are permitted provided that the following conditions are met:
|
|
|
13 * 1. Redistributions of source code must retain the above copyright notice,
|
|
|
14 * this list of conditions and the following disclaimer.
|
|
|
15 * 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
|
16 * this list of conditions and the following disclaimer in the documentation
|
|
|
17 * and/or other materials provided with the distribution.
|
|
|
18 * 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
|
19 * may be used to endorse or promote products derived from this software
|
|
|
20 * without specific prior written permission.
|
|
|
21 *
|
|
|
22 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
|
23 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
|
25 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
|
26 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
|
28 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
|
29 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
|
30 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
|
31 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
32 *
|
|
|
33 ******************************************************************************
|
|
|
34 */
|
|
|
35 /* Includes ------------------------------------------------------------------*/
|
|
|
36 #include "stm32f4xx_hal.h"
|
|
|
37 #include "ostc.h"
|
|
|
38
|
|
|
39
|
|
|
40 DMA_HandleTypeDef hdma_spi1_tx;
|
|
|
41
|
|
|
42 DMA_HandleTypeDef hdma_spi1_rx;
|
|
|
43
|
|
|
44 /* USER CODE BEGIN 0 */
|
|
|
45
|
|
|
46 /* USER CODE END 0 */
|
|
|
47
|
|
|
48 /**
|
|
|
49 * Initializes the Global MSP.
|
|
|
50 */
|
|
|
51 void HAL_MspInit(void)
|
|
|
52 {
|
|
|
53 /* USER CODE BEGIN MspInit 0 */
|
|
|
54 /* USER CODE END MspInit 0 */
|
|
|
55
|
|
|
56 HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_2);
|
|
|
57
|
|
|
58 /* System interrupt init*/
|
|
|
59 /** SysTick_IRQn interrupt configuration
|
|
|
60 * use 1 by Christian
|
|
|
61 */
|
|
|
62 HAL_NVIC_SetPriority(SysTick_IRQn, 1, 0);
|
|
|
63
|
|
|
64 /* USER CODE BEGIN MspInit 1 */
|
|
|
65 /* always set priority right */
|
|
|
66 HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_2);
|
|
|
67 /* USER CODE END MspInit 1 */
|
|
|
68 }
|
|
|
69
|
|
|
70 void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef* hdma2d)
|
|
|
71 {
|
|
|
72
|
|
|
73 if(hdma2d->Instance==DMA2D)
|
|
|
74 {
|
|
|
75 /* USER CODE BEGIN DMA2D_MspInit 0 */
|
|
|
76
|
|
|
77 /* USER CODE END DMA2D_MspInit 0 */
|
|
|
78 /* Peripheral clock enable */
|
|
|
79 __DMA2D_CLK_ENABLE();
|
|
|
80 /* USER CODE BEGIN DMA2D_MspInit 1 */
|
|
|
81 HAL_NVIC_SetPriority(DMA2D_IRQn, 1, 2);
|
|
|
82 HAL_NVIC_EnableIRQ(DMA2D_IRQn);
|
|
|
83 /* USER CODE END DMA2D_MspInit 1 */
|
|
|
84 }
|
|
|
85
|
|
|
86 }
|
|
|
87
|
|
|
88 void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef* hdma2d)
|
|
|
89 {
|
|
|
90
|
|
|
91 if(hdma2d->Instance==DMA2D)
|
|
|
92 {
|
|
|
93 /* USER CODE BEGIN DMA2D_MspDeInit 0 */
|
|
|
94
|
|
|
95 /* USER CODE END DMA2D_MspDeInit 0 */
|
|
|
96 /* Peripheral clock disable */
|
|
|
97 __DMA2D_CLK_DISABLE();
|
|
|
98 /* USER CODE BEGIN DMA2D_MspDeInit 1 */
|
|
|
99 __DMA2D_RELEASE_RESET();
|
|
|
100 /* USER CODE END DMA2D_MspDeInit 1 */
|
|
|
101 }
|
|
|
102
|
|
|
103 }
|
|
|
104
|
|
|
105 void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
|
|
|
106 {
|
|
|
107
|
|
|
108 GPIO_InitTypeDef GPIO_InitStruct;
|
|
|
109 if(hltdc->Instance==LTDC)
|
|
|
110 {
|
|
|
111 /* USER CODE BEGIN LTDC_MspInit 0 */
|
|
|
112 __GPIOE_CLK_ENABLE();
|
|
|
113 __GPIOF_CLK_ENABLE();
|
|
|
114 __GPIOG_CLK_ENABLE();
|
|
|
115 __GPIOH_CLK_ENABLE();
|
|
|
116 __GPIOI_CLK_ENABLE();
|
|
|
117
|
|
|
118 /* USER CODE END LTDC_MspInit 0 */
|
|
|
119 /* Peripheral clock enable */
|
|
|
120 __LTDC_CLK_ENABLE();
|
|
|
121
|
|
|
122 /**LTDC GPIO Configuration
|
|
|
123 PE4 ------> LTDC_B0
|
|
|
124 PE5 ------> LTDC_G0
|
|
|
125 PE6 ------> LTDC_G1
|
|
|
126 PI9 ------> LTDC_VSYNC
|
|
|
127 PI10 ------> LTDC_HSYNC
|
|
|
128 PF10 ------> LTDC_DE
|
|
|
129 PH2 ------> LTDC_R0
|
|
|
130 PH3 ------> LTDC_R1
|
|
|
131 PH8 ------> LTDC_R2
|
|
|
132 PH9 ------> LTDC_R3
|
|
|
133 PH10 ------> LTDC_R4
|
|
|
134 PH11 ------> LTDC_R5
|
|
|
135 PH12 ------> LTDC_R6
|
|
|
136 PG6 ------> LTDC_R7
|
|
|
137 PG7 ------> LTDC_CLK
|
|
|
138 PH13 ------> LTDC_G2
|
|
|
139 PH14 ------> LTDC_G3
|
|
|
140 PH15 ------> LTDC_G4
|
|
|
141 PI0 ------> LTDC_G5
|
|
|
142 PI1 ------> LTDC_G6
|
|
|
143 PI2 ------> LTDC_G7
|
|
|
144 PG10 ------> LTDC_B2
|
|
|
145 PG11 ------> LTDC_B3
|
|
|
146 PG12 ------> LTDC_B1
|
|
|
147 PI4 ------> LTDC_B4
|
|
|
148 PI5 ------> LTDC_B5
|
|
|
149 PI6 ------> LTDC_B6
|
|
|
150 PI7 ------> LTDC_B7
|
|
|
151 */
|
|
|
152 GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6;
|
|
|
153 GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
|
154 GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
|
155 GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
|
|
156 GPIO_InitStruct.Alternate = GPIO_AF14_LTDC;
|
|
|
157 HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
|
|
|
158
|
|
|
159 GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_0|GPIO_PIN_1
|
|
|
160 |GPIO_PIN_2|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6
|
|
|
161 |GPIO_PIN_7;
|
|
|
162 GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
|
163 GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
|
164 GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
|
|
165 GPIO_InitStruct.Alternate = GPIO_AF14_LTDC;
|
|
|
166 HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
|
|
|
167
|
|
|
168 GPIO_InitStruct.Pin = GPIO_PIN_10;
|
|
|
169 GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
|
170 GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
|
171 GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
|
|
172 GPIO_InitStruct.Alternate = GPIO_AF14_LTDC;
|
|
|
173 HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
|
|
|
174
|
|
|
175 GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_8|GPIO_PIN_9
|
|
|
176 |GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13
|
|
|
177 |GPIO_PIN_14|GPIO_PIN_15;
|
|
|
178 GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
|
179 GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
|
180 GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
|
|
181 GPIO_InitStruct.Alternate = GPIO_AF14_LTDC;
|
|
|
182 HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
|
|
|
183
|
|
|
184 GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7|GPIO_PIN_10|GPIO_PIN_11
|
|
|
185 |GPIO_PIN_12;
|
|
|
186 GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
|
187 GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
|
188 GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
|
|
189 GPIO_InitStruct.Alternate = GPIO_AF14_LTDC;
|
|
|
190 HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
|
|
|
191
|
|
|
192 /* USER CODE BEGIN LTDC_MspInit 1 */
|
|
|
193
|
|
|
194 /* USER CODE END LTDC_MspInit 1 */
|
|
|
195 }
|
|
|
196
|
|
|
197 }
|
|
|
198
|
|
|
199 void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc)
|
|
|
200 {
|
|
|
201
|
|
|
202 if(hltdc->Instance==LTDC)
|
|
|
203 {
|
|
|
204 /* USER CODE BEGIN LTDC_MspDeInit 0 */
|
|
|
205
|
|
|
206 /* USER CODE END LTDC_MspDeInit 0 */
|
|
|
207 /* Peripheral clock disable */
|
|
|
208 __LTDC_CLK_DISABLE();
|
|
|
209
|
|
|
210 /**LTDC GPIO Configuration
|
|
|
211 PE4 ------> LTDC_B0
|
|
|
212 PE5 ------> LTDC_G0
|
|
|
213 PE6 ------> LTDC_G1
|
|
|
214 PI9 ------> LTDC_VSYNC
|
|
|
215 PI10 ------> LTDC_HSYNC
|
|
|
216 PF10 ------> LTDC_DE
|
|
|
217 PH2 ------> LTDC_R0
|
|
|
218 PH3 ------> LTDC_R1
|
|
|
219 PH8 ------> LTDC_R2
|
|
|
220 PH9 ------> LTDC_R3
|
|
|
221 PH10 ------> LTDC_R4
|
|
|
222 PH11 ------> LTDC_R5
|
|
|
223 PH12 ------> LTDC_R6
|
|
|
224 PG6 ------> LTDC_R7
|
|
|
225 PG7 ------> LTDC_CLK
|
|
|
226 PH13 ------> LTDC_G2
|
|
|
227 PH14 ------> LTDC_G3
|
|
|
228 PH15 ------> LTDC_G4
|
|
|
229 PI0 ------> LTDC_G5
|
|
|
230 PI1 ------> LTDC_G6
|
|
|
231 PI2 ------> LTDC_G7
|
|
|
232 PG10 ------> LTDC_B2
|
|
|
233 PG11 ------> LTDC_B3
|
|
|
234 PG12 ------> LTDC_B1
|
|
|
235 PI4 ------> LTDC_B4
|
|
|
236 PI5 ------> LTDC_B5
|
|
|
237 PI6 ------> LTDC_B6
|
|
|
238 PI7 ------> LTDC_B7
|
|
|
239 */
|
|
|
240 HAL_GPIO_DeInit(GPIOE, GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6);
|
|
|
241
|
|
|
242 HAL_GPIO_DeInit(GPIOI, GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_0|GPIO_PIN_1
|
|
|
243 |GPIO_PIN_2|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6
|
|
|
244 |GPIO_PIN_7);
|
|
|
245
|
|
|
246 HAL_GPIO_DeInit(GPIOF, GPIO_PIN_10);
|
|
|
247
|
|
|
248 HAL_GPIO_DeInit(GPIOH, GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_8|GPIO_PIN_9
|
|
|
249 |GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13
|
|
|
250 |GPIO_PIN_14|GPIO_PIN_15);
|
|
|
251
|
|
|
252 HAL_GPIO_DeInit(GPIOG, GPIO_PIN_6|GPIO_PIN_7|GPIO_PIN_10|GPIO_PIN_11
|
|
|
253 |GPIO_PIN_12);
|
|
|
254
|
|
|
255 /* USER CODE BEGIN LTDC_MspDeInit 1 */
|
|
|
256 __LTDC_RELEASE_RESET();
|
|
|
257
|
|
|
258 /* USER CODE END LTDC_MspDeInit 1 */
|
|
|
259 }
|
|
|
260
|
|
|
261 }
|
|
|
262
|
|
|
263 void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
|
|
|
264 {
|
|
|
265
|
|
|
266 GPIO_InitTypeDef GPIO_InitStruct;
|
|
|
267 if(hspi->Instance==SPI1)
|
|
|
268 {
|
|
|
269 /* USER CODE BEGIN SPI1_MspInit 0 */
|
|
|
270 __GPIOA_CLK_ENABLE();
|
|
|
271 __GPIOB_CLK_ENABLE();
|
|
|
272 __DMA2_CLK_ENABLE();
|
|
|
273
|
|
|
274 /* USER CODE END SPI1_MspInit 0 */
|
|
|
275 /* Peripheral clock enable */
|
|
|
276 __SPI1_CLK_ENABLE();
|
|
|
277
|
|
|
278 /**SPI1 GPIO Configuration
|
|
|
279 alt: PA4 ------> SPI1_NSS, jetzt soft
|
|
|
280 PA5 ------> SPI1_SCK
|
|
|
281 alt: PA6 ------> SPI1_MISO
|
|
|
282 neu: PB4 ------> SPI1_MISO
|
|
|
283 PA7 ------> SPI1_MOSI
|
|
|
284 */
|
|
|
285 // GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7;
|
|
|
286 GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_7;
|
|
|
287 GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
|
288 GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
|
289 GPIO_InitStruct.Speed = GPIO_SPEED_MEDIUM;//GPIO_SPEED_LOW;
|
|
|
290 GPIO_InitStruct.Alternate = GPIO_AF5_SPI1;
|
|
|
291 HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
292 GPIO_InitStruct.Pin = GPIO_PIN_4;
|
|
|
293 HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
|
294
|
|
|
295 /* Peripheral DMA init*/
|
|
|
296
|
|
|
297 hdma_spi1_tx.Instance = DMA2_Stream3;
|
|
|
298 hdma_spi1_tx.Init.Channel = DMA_CHANNEL_3;
|
|
|
299 hdma_spi1_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
|
|
|
300 hdma_spi1_tx.Init.PeriphInc = DMA_PINC_DISABLE;
|
|
|
301 hdma_spi1_tx.Init.MemInc = DMA_MINC_ENABLE;
|
|
|
302 hdma_spi1_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
|
|
303 hdma_spi1_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
|
|
304 hdma_spi1_tx.Init.Mode = DMA_NORMAL;
|
|
|
305 hdma_spi1_tx.Init.Priority = DMA_PRIORITY_LOW;
|
|
|
306 hdma_spi1_tx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
|
|
307 /* by christian */
|
|
|
308 hdma_spi1_tx.Init.MemBurst = DMA_MBURST_INC4;
|
|
|
309 hdma_spi1_tx.Init.PeriphBurst = DMA_PBURST_INC4;
|
|
|
310 HAL_DMA_Init(&hdma_spi1_tx);
|
|
|
311
|
|
|
312 __HAL_LINKDMA(hspi,hdmatx,hdma_spi1_tx);
|
|
|
313
|
|
|
314 hdma_spi1_rx.Instance = DMA2_Stream0;
|
|
|
315 hdma_spi1_rx.Init.Channel = DMA_CHANNEL_3;
|
|
|
316 hdma_spi1_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
|
|
|
317 hdma_spi1_rx.Init.PeriphInc = DMA_PINC_DISABLE;
|
|
|
318 hdma_spi1_rx.Init.MemInc = DMA_MINC_ENABLE;
|
|
|
319 hdma_spi1_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
|
|
320 hdma_spi1_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
|
|
321 hdma_spi1_rx.Init.Mode = DMA_NORMAL;
|
|
|
322 hdma_spi1_rx.Init.Priority = DMA_PRIORITY_HIGH;
|
|
|
323 hdma_spi1_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
|
|
324 /* by christian */
|
|
|
325 hdma_spi1_rx.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
|
|
|
326
|
|
|
327 hdma_spi1_rx.Init.MemBurst = DMA_MBURST_INC4;
|
|
|
328 hdma_spi1_rx.Init.PeriphBurst = DMA_PBURST_INC4;
|
|
|
329 HAL_DMA_Init(&hdma_spi1_rx);
|
|
|
330
|
|
|
331 __HAL_LINKDMA(hspi, hdmarx, hdma_spi1_rx);
|
|
|
332
|
|
|
333 /*##-4- Configure the NVIC for DMA #########################################*/
|
|
|
334 /* NVIC configuration for DMA transfer complete interrupt (SPI1_TX) */
|
|
|
335 HAL_NVIC_SetPriority(DMA2_Stream3_IRQn, 0, 1);
|
|
|
336 HAL_NVIC_EnableIRQ(DMA2_Stream3_IRQn);
|
|
|
337
|
|
|
338
|
|
|
339 /* NVIC configuration for DMA transfer complete interrupt (SPI1_RX) */
|
|
|
340 HAL_NVIC_SetPriority(DMA2_Stream0_IRQn, 0, 0);
|
|
|
341 HAL_NVIC_EnableIRQ(DMA2_Stream0_IRQn);
|
|
|
342
|
|
|
343 }
|
|
|
344 else if(hspi->Instance==SPI2)
|
|
|
345 {
|
|
|
346 /* USER CODE BEGIN SPI2_MspInit 0 */
|
|
|
347 __GPIOB_CLK_ENABLE();
|
|
|
348
|
|
|
349 /* USER CODE END SPI2_MspInit 0 */
|
|
|
350 /* Peripheral clock enable */
|
|
|
351 __SPI2_CLK_ENABLE();
|
|
|
352
|
|
|
353 /**SPI2 GPIO Configuration
|
|
|
354 PB13 ------> SPI2_SCK
|
|
|
355 PB14 ------> SPI2_MISO
|
|
|
356 PB15 ------> SPI2_MOSI
|
|
|
357 */
|
|
|
358 GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
|
|
|
359 GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
|
360 GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
|
361 GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
|
|
362 GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
|
|
|
363 HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
|
364
|
|
|
365 /* USER CODE BEGIN SPI2_MspInit 1 */
|
|
|
366
|
|
|
367 /* USER CODE END SPI2_MspInit 1 */
|
|
|
368 }
|
|
|
369 else if(hspi->Instance==SPI5)
|
|
|
370 {
|
|
|
371 /* USER CODE BEGIN SPI5_MspInit 0 */
|
|
|
372 __GPIOF_CLK_ENABLE();
|
|
|
373
|
|
|
374 /* USER CODE END SPI5_MspInit 0 */
|
|
|
375 /* Peripheral clock enable */
|
|
|
376 __SPI5_CLK_ENABLE();
|
|
|
377
|
|
|
378 /**SPI5 GPIO Configuration
|
|
|
379 PF7 ------> SPI5_SCK
|
|
|
380 PF8 ------> SPI5_MISO
|
|
|
381 PF9 ------> SPI5_MOSI
|
|
|
382 */
|
|
|
383 GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9;
|
|
|
384 GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
|
385 GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
|
386 GPIO_InitStruct.Speed = GPIO_SPEED_MEDIUM;//GPIO_SPEED_LOW;
|
|
|
387 GPIO_InitStruct.Alternate = GPIO_AF5_SPI5;
|
|
|
388 HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
|
|
|
389
|
|
|
390 /* USER CODE BEGIN SPI5_MspInit 1 */
|
|
|
391
|
|
|
392 /* USER CODE END SPI5_MspInit 1 */
|
|
|
393 }
|
|
|
394
|
|
|
395 }
|
|
|
396
|
|
|
397 void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
|
|
|
398 {
|
|
|
399
|
|
|
400 if(hspi->Instance==SPI1)
|
|
|
401 {
|
|
|
402 /* USER CODE BEGIN SPI1_MspDeInit 0 */
|
|
|
403 __SPI1_FORCE_RESET();
|
|
|
404 __SPI1_RELEASE_RESET();
|
|
|
405
|
|
|
406 /* USER CODE END SPI1_MspDeInit 0 */
|
|
|
407 /* Peripheral clock disable */
|
|
|
408 __SPI1_CLK_DISABLE();
|
|
|
409
|
|
|
410 /**SPI1 GPIO Configuration
|
|
|
411 PA4 ------> SPI1_NSS
|
|
|
412 PA5 ------> SPI1_SCK
|
|
|
413 PA6 ------> SPI1_MISO
|
|
|
414 PA7 ------> SPI1_MOSI
|
|
|
415 */
|
|
|
416 HAL_GPIO_DeInit(GPIOA, GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);
|
|
|
417
|
|
|
418 /* Peripheral DMA DeInit*/
|
|
|
419 HAL_DMA_DeInit(hspi->hdmatx);
|
|
|
420 HAL_DMA_DeInit(hspi->hdmarx);
|
|
|
421 /* USER CODE BEGIN SPI1_MspDeInit 1 */
|
|
|
422
|
|
|
423 /* USER CODE END SPI1_MspDeInit 1 */
|
|
|
424 }
|
|
|
425 else if(hspi->Instance==SPI2)
|
|
|
426 {
|
|
|
427 /* USER CODE BEGIN SPI2_MspDeInit 0 */
|
|
|
428
|
|
|
429 /* USER CODE END SPI2_MspDeInit 0 */
|
|
|
430 /* Peripheral clock disable */
|
|
|
431 __SPI2_CLK_DISABLE();
|
|
|
432
|
|
|
433 /**SPI2 GPIO Configuration
|
|
|
434 PB13 ------> SPI2_SCK
|
|
|
435 PB14 ------> SPI2_MISO
|
|
|
436 PB15 ------> SPI2_MOSI
|
|
|
437 */
|
|
|
438 HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
|
|
|
439
|
|
|
440 /* USER CODE BEGIN SPI2_MspDeInit 1 */
|
|
|
441
|
|
|
442 /* USER CODE END SPI2_MspDeInit 1 */
|
|
|
443 }
|
|
|
444 else if(hspi->Instance==SPI5)
|
|
|
445 {
|
|
|
446 /* USER CODE BEGIN SPI5_MspDeInit 0 */
|
|
|
447 __SPI5_FORCE_RESET();
|
|
|
448 __SPI5_RELEASE_RESET();
|
|
|
449
|
|
|
450 /* USER CODE END SPI5_MspDeInit 0 */
|
|
|
451 /* Peripheral clock disable */
|
|
|
452 __SPI5_CLK_DISABLE();
|
|
|
453
|
|
|
454 /**SPI5 GPIO Configuration
|
|
|
455 PF7 ------> SPI5_SCK
|
|
|
456 PF8 ------> SPI5_MISO
|
|
|
457 PF9 ------> SPI5_MOSI
|
|
|
458 */
|
|
|
459 HAL_GPIO_DeInit(GPIOF, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9);
|
|
|
460
|
|
|
461 /* USER CODE BEGIN SPI5_MspDeInit 1 */
|
|
|
462
|
|
|
463 /* USER CODE END SPI5_MspDeInit 1 */
|
|
|
464 }
|
|
|
465
|
|
|
466 }
|
|
|
467
|
|
|
468 void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef* htim_pwm)
|
|
|
469 {
|
|
|
470 GPIO_InitTypeDef GPIO_InitStruct;
|
|
|
471 if(htim_pwm->Instance==TIM_BACKLIGHT)
|
|
|
472 {
|
|
|
473 TIM_BACKLIGHT_GPIO_ENABLE();
|
|
|
474 TIM_BACKLIGHT_CLK_ENABLE();
|
|
|
475
|
|
|
476 GPIO_InitStruct.Pin = TIM_BACKLIGHT_PIN;
|
|
|
477 GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
|
478 GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
|
479 GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
|
|
480 GPIO_InitStruct.Alternate = GPIO_AF2_TIM3;
|
|
|
481 HAL_GPIO_Init(TIM_BACKLIGHT_GPIO_PORT, &GPIO_InitStruct);
|
|
|
482 }
|
|
|
483
|
|
|
484 }
|
|
|
485
|
|
|
486 void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
|
|
|
487 {
|
|
|
488 if(htim_base->Instance==TIMx)
|
|
|
489 {
|
|
|
490 TIMx_CLK_ENABLE();
|
|
|
491
|
|
|
492 HAL_NVIC_SetPriority(TIMx_IRQn, 2, 1);
|
|
|
493 HAL_NVIC_EnableIRQ(TIMx_IRQn);
|
|
|
494 }
|
|
|
495 if(htim_base->Instance==TIM7)
|
|
|
496 {
|
|
|
497 __TIM7_CLK_ENABLE();
|
|
|
498
|
|
|
499 HAL_NVIC_SetPriority(TIM7_IRQn, 2, 0);
|
|
|
500 HAL_NVIC_EnableIRQ(TIM7_IRQn);
|
|
|
501 }
|
|
|
502 }
|
|
|
503
|
|
|
504 void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef* htim_pwm)
|
|
|
505 {
|
|
|
506
|
|
|
507 if(htim_pwm->Instance==TIM2)
|
|
|
508 {
|
|
|
509 /* USER CODE BEGIN TIM2_MspDeInit 0 */
|
|
|
510
|
|
|
511 /* USER CODE END TIM2_MspDeInit 0 */
|
|
|
512 /* Peripheral clock disable */
|
|
|
513 __TIM2_CLK_DISABLE();
|
|
|
514
|
|
|
515 /**TIM2 GPIO Configuration
|
|
|
516 PA15 ------> TIM2_CH1
|
|
|
517 */
|
|
|
518 HAL_GPIO_DeInit(GPIOA, GPIO_PIN_15);
|
|
|
519
|
|
|
520 /* USER CODE BEGIN TIM2_MspDeInit 1 */
|
|
|
521
|
|
|
522 /* USER CODE END TIM2_MspDeInit 1 */
|
|
|
523 }
|
|
|
524
|
|
|
525 }
|
|
|
526
|
|
|
527 void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
|
|
|
528 {
|
|
|
529
|
|
|
530 if(htim_base->Instance==TIM3)
|
|
|
531 {
|
|
|
532 /* USER CODE BEGIN TIM3_MspDeInit 0 */
|
|
|
533
|
|
|
534 /* USER CODE END TIM3_MspDeInit 0 */
|
|
|
535 /* Peripheral clock disable */
|
|
|
536 __TIM3_CLK_DISABLE();
|
|
|
537
|
|
|
538 /**TIM3 GPIO Configuration
|
|
|
539 PC7 ------> TIM3_CH2
|
|
|
540 */
|
|
|
541 HAL_GPIO_DeInit(GPIOC, GPIO_PIN_7);
|
|
|
542
|
|
|
543 /* USER CODE BEGIN TIM3_MspDeInit 1 */
|
|
|
544
|
|
|
545 /* USER CODE END TIM3_MspDeInit 1 */
|
|
|
546 }
|
|
|
547
|
|
|
548 }
|
|
|
549
|
|
|
550 void HAL_UART_MspInit(UART_HandleTypeDef* huart)
|
|
|
551 {
|
|
|
552
|
|
|
553 GPIO_InitTypeDef GPIO_InitStruct;
|
|
|
554 if(huart->Instance==USART1)
|
|
|
555 {
|
|
|
556 /* USER CODE BEGIN USART1_MspInit 0 */
|
|
|
557 __GPIOA_CLK_ENABLE();
|
|
|
558
|
|
|
559 /* USER CODE END USART1_MspInit 0 */
|
|
|
560 /* Peripheral clock enable */
|
|
|
561 __USART1_CLK_ENABLE();
|
|
|
562
|
|
|
563 /**USART1 GPIO Configuration
|
|
|
564 PA9 ------> USART1_TX
|
|
|
565 PA10 ------> USART1_RX
|
|
|
566 PA11 ------> USART1_CTS
|
|
|
567 PA12 ------> USART1_RTS
|
|
|
568 */
|
|
|
569 #ifdef USARTx_CTS_PIN
|
|
|
570 GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12;
|
|
|
571 #else
|
|
|
572 GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
|
|
|
573 #endif
|
|
|
574 GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
|
575 GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
|
576 GPIO_InitStruct.Speed = GPIO_SPEED_FAST;//GPIO_SPEED_LOW;
|
|
|
577 GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
|
|
|
578 HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
579
|
|
|
580 HAL_NVIC_SetPriority(USART1_IRQn, 0, 1);
|
|
|
581 HAL_NVIC_EnableIRQ(USART1_IRQn);
|
|
|
582 }
|
|
|
583 #ifdef USART_IR_HUD
|
|
|
584 else if(huart->Instance==USART_IR_HUD) /* USART2 */
|
|
|
585 {
|
|
|
586 USART_IR_HUD_CLK_ENABLE();
|
|
|
587 USART_IR_HUD_TX_GPIO_CLK_ENABLE();
|
|
|
588 USART_IR_HUD_RX_GPIO_CLK_ENABLE();
|
|
|
589
|
|
|
590 /**USART2 GPIO Configuration
|
|
|
591 PD5 ------> USART2_TX
|
|
|
592 PD6 ------> USART2_RX
|
|
|
593 */
|
|
|
594
|
|
|
595 GPIO_InitStruct.Pin = USART_IR_HUD_TX_PIN;
|
|
|
596 GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
|
597 GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
|
598 GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
|
|
599 GPIO_InitStruct.Alternate = USART_IR_HUD_TX_AF;
|
|
|
600 HAL_GPIO_Init(USART_IR_HUD_TX_GPIO_PORT, &GPIO_InitStruct);
|
|
|
601
|
|
|
602 GPIO_InitStruct.Pin = USART_IR_HUD_RX_PIN;
|
|
|
603 GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
|
604 GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
|
605 GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
|
|
606 GPIO_InitStruct.Alternate = USART_IR_HUD_RX_AF;
|
|
|
607 HAL_GPIO_Init(USART_IR_HUD_RX_GPIO_PORT, &GPIO_InitStruct);
|
|
|
608
|
|
|
609 HAL_NVIC_SetPriority(USART_IR_HUD_IRQn, 0, 1);
|
|
|
610 HAL_NVIC_EnableIRQ(USART_IR_HUD_IRQn);
|
|
|
611 }
|
|
|
612 #endif
|
|
|
613 else if(huart->Instance==USART3)
|
|
|
614 {
|
|
|
615 /* USER CODE BEGIN USART3_MspInit 0 */
|
|
|
616
|
|
|
617 /* USER CODE END USART3_MspInit 0 */
|
|
|
618 /* Peripheral clock enable */
|
|
|
619 __USART3_CLK_ENABLE();
|
|
|
620
|
|
|
621 /**USART3 GPIO Configuration
|
|
|
622 PC10 ------> USART3_TX
|
|
|
623 PC11 ------> USART3_RX
|
|
|
624 */
|
|
|
625 GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11;
|
|
|
626 GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
|
627 GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
|
628 GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
|
|
629 GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
|
|
|
630 HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
|
|
631
|
|
|
632 /* USER CODE BEGIN USART3_MspInit 1 */
|
|
|
633
|
|
|
634 /* USER CODE END USART3_MspInit 1 */
|
|
|
635 }
|
|
|
636
|
|
|
637 }
|
|
|
638
|
|
|
639 void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
|
|
|
640 {
|
|
|
641
|
|
|
642 if(huart->Instance==USART1)
|
|
|
643 {
|
|
|
644 /* USER CODE BEGIN USART1_MspDeInit 0 */
|
|
|
645
|
|
|
646 /* USER CODE END USART1_MspDeInit 0 */
|
|
|
647 /* Peripheral clock disable */
|
|
|
648 HAL_NVIC_DisableIRQ(USART1_IRQn);
|
|
|
649 __USART1_CLK_DISABLE();
|
|
|
650
|
|
|
651 /**USART1 GPIO Configuration
|
|
|
652 PA9 ------> USART1_TX
|
|
|
653 PA10 ------> USART1_RX
|
|
|
654 */
|
|
|
655 #ifdef USARTx_CTS_PIN
|
|
|
656 HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12);
|
|
|
657 #else
|
|
|
658 HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
|
|
|
659 #endif
|
|
|
660
|
|
|
661 /* USER CODE BEGIN USART1_MspDeInit 1 */
|
|
|
662
|
|
|
663 /* USER CODE END USART1_MspDeInit 1 */
|
|
|
664 }
|
|
|
665 else if(huart->Instance==USART2)
|
|
|
666 {
|
|
|
667 /* USER CODE BEGIN USART2_MspDeInit 0 */
|
|
|
668
|
|
|
669 /* USER CODE END USART2_MspDeInit 0 */
|
|
|
670 /* Peripheral clock disable */
|
|
|
671 __USART2_CLK_DISABLE();
|
|
|
672
|
|
|
673 /**USART2 GPIO Configuration
|
|
|
674 PD5 ------> USART2_TX
|
|
|
675 PD6 ------> USART2_RX
|
|
|
676 */
|
|
|
677 HAL_GPIO_DeInit(GPIOD, GPIO_PIN_5|GPIO_PIN_6);
|
|
|
678
|
|
|
679 /* USER CODE BEGIN USART2_MspDeInit 1 */
|
|
|
680
|
|
|
681 /* USER CODE END USART2_MspDeInit 1 */
|
|
|
682 }
|
|
|
683 else if(huart->Instance==USART3)
|
|
|
684 {
|
|
|
685 /* USER CODE BEGIN USART3_MspDeInit 0 */
|
|
|
686
|
|
|
687 /* USER CODE END USART3_MspDeInit 0 */
|
|
|
688 /* Peripheral clock disable */
|
|
|
689 __USART3_CLK_DISABLE();
|
|
|
690
|
|
|
691 /**USART3 GPIO Configuration
|
|
|
692 PC10 ------> USART3_TX
|
|
|
693 PC11 ------> USART3_RX
|
|
|
694 */
|
|
|
695 HAL_GPIO_DeInit(GPIOC, GPIO_PIN_10|GPIO_PIN_11);
|
|
|
696
|
|
|
697 /* USER CODE BEGIN USART3_MspDeInit 1 */
|
|
|
698
|
|
|
699 /* USER CODE END USART3_MspDeInit 1 */
|
|
|
700 }
|
|
|
701
|
|
|
702 }
|
|
|
703
|
|
|
704 static int FMC_Initialized = 0;
|
|
|
705
|
|
|
706 static void HAL_FMC_MspInit(void){
|
|
|
707 GPIO_InitTypeDef GPIO_InitStruct;
|
|
|
708 if (FMC_Initialized) {
|
|
|
709 return;
|
|
|
710 }
|
|
|
711 FMC_Initialized = 1;
|
|
|
712 /* Peripheral clock enable */
|
|
|
713 /* by christian */
|
|
|
714 __GPIOC_CLK_ENABLE();
|
|
|
715 __GPIOD_CLK_ENABLE();
|
|
|
716 __GPIOE_CLK_ENABLE();
|
|
|
717 __GPIOF_CLK_ENABLE();
|
|
|
718 __GPIOG_CLK_ENABLE();
|
|
|
719 __GPIOH_CLK_ENABLE();
|
|
|
720
|
|
|
721 __FMC_CLK_ENABLE();
|
|
|
722
|
|
|
723 /** FMC GPIO Configuration
|
|
|
724 PF0 ------> FMC_A0
|
|
|
725 PF1 ------> FMC_A1
|
|
|
726 PF2 ------> FMC_A2
|
|
|
727 PF3 ------> FMC_A3
|
|
|
728 PF4 ------> FMC_A4
|
|
|
729 PF5 ------> FMC_A5
|
|
|
730 PC0 ------> FMC_SDNWE
|
|
|
731 PF11 ------> FMC_SDNRAS
|
|
|
732 PF12 ------> FMC_A6
|
|
|
733 PF13 ------> FMC_A7
|
|
|
734 PF14 ------> FMC_A8
|
|
|
735 PF15 ------> FMC_A9
|
|
|
736 PG0 ------> FMC_A10
|
|
|
737 PG1 ------> FMC_A11
|
|
|
738 PE7 ------> FMC_D4
|
|
|
739 PE8 ------> FMC_D5
|
|
|
740 PE9 ------> FMC_D6
|
|
|
741 PE10 ------> FMC_D7
|
|
|
742 PE11 ------> FMC_D8
|
|
|
743 PE12 ------> FMC_D9
|
|
|
744 PE13 ------> FMC_D10
|
|
|
745 PE14 ------> FMC_D11
|
|
|
746 PE15 ------> FMC_D12
|
|
|
747 PH6 ------> FMC_SDNE1 neu
|
|
|
748 PH7 ------> FMC_SDCKE1 neu
|
|
|
749 PD8 ------> FMC_D13
|
|
|
750 PD9 ------> FMC_D14
|
|
|
751 PD10 ------> FMC_D15
|
|
|
752 PD14 ------> FMC_D0
|
|
|
753 PD15 ------> FMC_D1
|
|
|
754 PG2 ------> FMC_A12
|
|
|
755 PG4 ------> FMC_BA0
|
|
|
756 PG5 ------> FMC_BA1
|
|
|
757 PG8 ------> FMC_SDCLK
|
|
|
758 PD0 ------> FMC_D2
|
|
|
759 PD1 ------> FMC_D3
|
|
|
760 PG15 ------> FMC_SDNCAS
|
|
|
761 PE0 ------> FMC_NBL0
|
|
|
762 PE1 ------> FMC_NBL1
|
|
|
763 */
|
|
|
764
|
|
|
765 GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
|
766 GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
|
767 GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
|
|
|
768 GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
|
|
|
769
|
|
|
770
|
|
|
771 GPIO_InitStruct.Pin = GPIO_PIN_0;
|
|
|
772 HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
|
|
773
|
|
|
774 GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14
|
|
|
775 |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1;
|
|
|
776 HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
|
|
|
777
|
|
|
778 GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10
|
|
|
779 |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14
|
|
|
780 |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1;
|
|
|
781 HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
|
|
|
782
|
|
|
783 GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
|
|
|
784 |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12
|
|
|
785 |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
|
|
|
786 HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
|
|
|
787
|
|
|
788 GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_4
|
|
|
789 |GPIO_PIN_5|GPIO_PIN_8|GPIO_PIN_15;
|
|
|
790 HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
|
|
|
791
|
|
|
792 GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
|
|
|
793 HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
|
|
|
794
|
|
|
795
|
|
|
796 }
|
|
|
797
|
|
|
798 void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef* hsdram){
|
|
|
799 HAL_FMC_MspInit();
|
|
|
800 }
|
|
|
801
|
|
|
802 static int FMC_DeInitialized = 0;
|
|
|
803
|
|
|
804 static void HAL_FMC_MspDeInit(void){
|
|
|
805 if (FMC_DeInitialized) {
|
|
|
806 return;
|
|
|
807 }
|
|
|
808 FMC_DeInitialized = 1;
|
|
|
809 /* Peripheral clock enable */
|
|
|
810 __FMC_CLK_DISABLE();
|
|
|
811
|
|
|
812 /** FMC GPIO Configuration
|
|
|
813 PF0 ------> FMC_A0
|
|
|
814 PF1 ------> FMC_A1
|
|
|
815 PF2 ------> FMC_A2
|
|
|
816 PF3 ------> FMC_A3
|
|
|
817 PF4 ------> FMC_A4
|
|
|
818 PF5 ------> FMC_A5
|
|
|
819 PC0 ------> FMC_SDNWE
|
|
|
820 PF11 ------> FMC_SDNRAS
|
|
|
821 PF12 ------> FMC_A6
|
|
|
822 PF13 ------> FMC_A7
|
|
|
823 PF14 ------> FMC_A8
|
|
|
824 PF15 ------> FMC_A9
|
|
|
825 PG0 ------> FMC_A10
|
|
|
826 PG1 ------> FMC_A11
|
|
|
827 PE7 ------> FMC_D4
|
|
|
828 PE8 ------> FMC_D5
|
|
|
829 PE9 ------> FMC_D6
|
|
|
830 PE10 ------> FMC_D7
|
|
|
831 PE11 ------> FMC_D8
|
|
|
832 PE12 ------> FMC_D9
|
|
|
833 PE13 ------> FMC_D10
|
|
|
834 PE14 ------> FMC_D11
|
|
|
835 PE15 ------> FMC_D12
|
|
|
836 PH6 ------> FMC_SDNE1
|
|
|
837 PH7 ------> FMC_SDCKE1
|
|
|
838 PD8 ------> FMC_D13
|
|
|
839 PD9 ------> FMC_D14
|
|
|
840 PD10 ------> FMC_D15
|
|
|
841 PD14 ------> FMC_D0
|
|
|
842 PD15 ------> FMC_D1
|
|
|
843 PG2 ------> FMC_A12
|
|
|
844 PG4 ------> FMC_BA0
|
|
|
845 PG5 ------> FMC_BA1
|
|
|
846 PG8 ------> FMC_SDCLK
|
|
|
847 PD0 ------> FMC_D2
|
|
|
848 PD1 ------> FMC_D3
|
|
|
849 PG15 ------> FMC_SDNCAS
|
|
|
850 PE0 ------> FMC_NBL0
|
|
|
851 PE1 ------> FMC_NBL1
|
|
|
852 */
|
|
|
853 HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
|
|
|
854 |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_11|GPIO_PIN_12
|
|
|
855 |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
|
|
|
856
|
|
|
857 HAL_GPIO_DeInit(GPIOC, GPIO_PIN_0);
|
|
|
858
|
|
|
859 HAL_GPIO_DeInit(GPIOG, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_4
|
|
|
860 |GPIO_PIN_5|GPIO_PIN_8|GPIO_PIN_15);
|
|
|
861
|
|
|
862 HAL_GPIO_DeInit(GPIOE, GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10
|
|
|
863 |GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14
|
|
|
864 |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1);
|
|
|
865
|
|
|
866 HAL_GPIO_DeInit(GPIOH, GPIO_PIN_6|GPIO_PIN_7);
|
|
|
867
|
|
|
868 HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14
|
|
|
869 |GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1);
|
|
|
870
|
|
|
871 }
|
|
|
872
|
|
|
873 void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef* hsdram){
|
|
|
874 HAL_FMC_MspDeInit();
|
|
|
875 }
|
|
|
876
|
|
|
877 /* USER CODE BEGIN 1 */
|
|
|
878
|
|
|
879 /* USER CODE END 1 */
|
|
|
880
|
|
|
881 /**
|
|
|
882 * @}
|
|
|
883 */
|
|
|
884
|
|
|
885 /**
|
|
|
886 * @}
|
|
|
887 */
|
|
|
888
|
|
|
889 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
