Mercurial > public > ostc4
annotate Common/Inc/data_central.h @ 1022:ca713e199f22 GasConsumption
Add model ID 0x44 for the OSTC5 to the 0x60 (HARDWARE2) endpoint. The OSTC4 stays at model ID 0x43.
(mikeller)
| author | heinrichsweikamp |
|---|---|
| date | Sun, 29 Jun 2025 13:45:56 +0200 |
| parents | 8c0134a287da |
| children | 677d293c669f |
| rev | line source |
|---|---|
| 38 | 1 /////////////////////////////////////////////////////////////////////////////// |
| 2 /// -*- coding: UTF-8 -*- | |
| 3 /// | |
| 4 /// \file Common/Inc/data_central.h | |
| 5 /// \brief Common Dadatypes Declarations | |
| 6 /// \author Heinrichs Weikamp | |
| 7 /// \date 2018 | |
| 8 /// | |
| 9 /// $Id$ | |
| 10 /////////////////////////////////////////////////////////////////////////////// | |
| 11 /// \par Copyright (c) 2014-2018 Heinrichs Weikamp gmbh | |
| 12 /// | |
| 13 /// This program is free software: you can redistribute it and/or modify | |
| 14 /// it under the terms of the GNU General Public License as published by | |
| 15 /// the Free Software Foundation, either version 3 of the License, or | |
| 16 /// (at your option) any later version. | |
| 17 /// | |
| 18 /// This program is distributed in the hope that it will be useful, | |
| 19 /// but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 20 /// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 21 /// GNU General Public License for more details. | |
| 22 /// | |
| 23 /// You should have received a copy of the GNU General Public License | |
| 24 /// along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| 25 ////////////////////////////////////////////////////////////////////////////// | |
| 26 | |
| 27 #ifndef DATA_CENTRAL_H | |
| 28 #define DATA_CENTRAL_H | |
| 29 | |
| 30 #include <stdint.h> | |
|
776
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
774
diff
changeset
|
31 #include <stdbool.h> |
| 38 | 32 |
| 33 #include "settings.h" | |
| 34 #include "stm32f4xx_hal.h" | |
| 672 | 35 #include "configuration.h" |
| 38 | 36 |
| 37 #define BUEHLMANN_STRUCT_MAX_GASES 11 | |
| 38 #define BUEHLMANN_STRUCT_MAX_ASCENDRATES 3 | |
| 39 #define DECOINFO_STRUCT_MAX_STOPS 50 | |
| 40 | |
| 41 #define false 0 | |
| 42 #define true 1 | |
| 43 | |
| 796 | 44 #define EXT_INTERFACE_SENSOR_CNT (8u) /* 1 MUX + 7 sensors may be connected to the external interface (1 MUX + 3 ADC + 4 UART) */ |
| 45 #define EXT_INTERFACE_MUX_OFFSET (3u) /* the sensor struct starts with 3 ADC sensors */ | |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
714
diff
changeset
|
46 |
| 996 | 47 #define EXT_INTERFACE_BUZZER_ON_TIME_MS (2000u) /* max time the buzzer should be active without break (continuous Operation) */ |
| 48 #define EXT_INTERFACE_BUZZER_PING_TIME_MS (1000u) /* max time the buzzer should be active for single ping */ | |
| 951 | 49 #define EXT_INTERFACE_BUZZER_STABLE_TIME_MS (500u) /* min time a state (ON / OFF) should be stable before it may be changed */ |
| 50 | |
| 51 | |
| 38 | 52 /* Helper structs ------------------------------------------------------------*/ |
| 53 | |
| 54 //struct SGas | |
| 55 //contains gasinfos of single gas for deco calculation | |
| 56 typedef struct | |
| 57 { | |
| 58 uint8_t nitrogen_percentage; | |
| 59 uint8_t helium_percentage; | |
| 60 uint8_t setPoint_cbar; | |
| 61 uint8_t change_during_ascent_depth_meter_otherwise_zero; | |
| 62 uint8_t GasIdInSettings; | |
| 662 | 63 uint8_t AppliedDiveMode; |
| 64 float pscr_factor; | |
| 38 | 65 } SGas; |
| 66 | |
| 67 typedef struct | |
| 68 { | |
| 69 float use_from_depth_bar; | |
| 70 float rate_bar_per_minute; | |
| 71 } SAscentrate; | |
| 72 | |
| 73 | |
| 74 typedef struct{ | |
| 75 uint32_t date_rtc_dr; | |
| 76 uint32_t time_rtc_tr; | |
| 77 int32_t value_int32; | |
| 78 } SDeviceLine; | |
| 79 | |
| 80 | |
| 81 typedef struct | |
| 82 { | |
| 83 uint16_t ageInMilliSeconds; | |
| 84 uint8_t numberOfBytes; | |
| 85 uint8_t status; | |
| 86 uint8_t data[12]; | |
| 87 } SDataWireless; | |
| 88 | |
| 662 | 89 |
| 90 typedef struct | |
| 91 { | |
| 748 | 92 uint32_t CO2_ppm; |
| 662 | 93 uint16_t signalStrength; |
| 94 } SCO2Sensor; | |
| 95 | |
| 38 | 96 /* Main structs -------------------------------------------------------------*/ |
| 97 | |
| 98 | |
| 99 //struct SDecoinfo | |
| 100 //contains result of deco calculation | |
| 101 typedef struct | |
| 102 { | |
| 103 unsigned short output_stop_length_seconds[DECOINFO_STRUCT_MAX_STOPS]; | |
| 104 int output_time_to_surface_seconds; | |
| 105 int output_ndl_seconds; | |
| 106 float output_ceiling_meter; | |
|
247
3949781096d4
feature: Relative GF to Saturation renames
Jan Mulder <jlmulder@xs4all.nl>
parents:
225
diff
changeset
|
107 float super_saturation; |
| 38 | 108 uint32_t tickstamp; |
| 109 } SDecoinfo; | |
| 110 | |
| 111 | |
| 112 typedef struct | |
| 113 { | |
| 114 //crushing pressure | |
| 115 //in/out | |
| 116 float max_crushing_pressure_he[16]; | |
| 117 float max_crushing_pressure_n2[16]; | |
| 118 // | |
| 119 float run_time_start_of_deco_zone_save; | |
| 120 float depth_start_of_deco_zone_save; | |
| 121 float max_first_stop_depth_save; | |
| 122 short decomode_vpm_plus_conservatism_last_dive; | |
| 123 _Bool deco_zone_reached; | |
| 124 //State variables for repetetive dives | |
| 125 _Bool repetitive_variables_not_valid; | |
| 126 float adjusted_crushing_pressure_he[16]; | |
| 127 float adjusted_crushing_pressure_n2[16]; | |
| 128 float adjusted_critical_radius_he[16]; | |
| 129 float adjusted_critical_radius_n2[16]; | |
| 130 float initial_allowable_gradient_he[16]; | |
| 131 float initial_allowable_gradient_n2[16]; | |
| 132 float max_actual_gradient[16]; | |
| 133 } SVpm; | |
| 134 | |
| 135 typedef struct | |
| 136 { | |
| 137 _Bool repetitive_variables_not_valid; | |
| 138 _Bool is_data_from_RTE_CPU; | |
| 139 _Bool spare2; | |
| 140 _Bool spare3; | |
| 141 float adjusted_crushing_pressure_he[16]; | |
| 142 float adjusted_crushing_pressure_n2[16]; | |
| 143 float adjusted_critical_radius_he[16]; | |
| 144 float adjusted_critical_radius_n2[16]; | |
| 145 float initial_allowable_gradient_he[16]; | |
| 146 float initial_allowable_gradient_n2[16]; | |
| 147 float max_actual_gradient[16]; | |
| 148 } SVpmRepetitiveData; | |
| 149 | |
| 150 //struct SDevice | |
| 151 //contains information about usage | |
| 152 typedef struct | |
| 153 { | |
| 154 SDeviceLine batteryChargeCycles; | |
| 155 SDeviceLine batteryChargeCompleteCycles; | |
| 156 SDeviceLine temperatureMinimum; | |
| 157 SDeviceLine temperatureMaximum; | |
| 158 SDeviceLine depthMaximum; | |
| 159 SDeviceLine diveCycles; | |
| 160 SDeviceLine voltageMinimum; | |
| 161 SDeviceLine hoursOfOperation; | |
| 162 SDeviceLine diveAccident; | |
| 163 } SDevice; | |
| 164 | |
| 165 /* | |
| 166 typedef struct | |
| 167 { | |
| 168 SDevice device; | |
| 169 SVpmRepetitiveData vpm; | |
| 170 } SDeviceState; | |
| 171 */ | |
| 172 | |
|
899
2225c467f1e9
Added data path and visualization for position data:
Ideenmodellierer
parents:
868
diff
changeset
|
173 typedef struct |
|
2225c467f1e9
Added data path and visualization for position data:
Ideenmodellierer
parents:
868
diff
changeset
|
174 { |
| 931 | 175 float fLat; |
| 176 float fLon; | |
| 941 | 177 }SGnssCoord; |
| 178 | |
| 949 | 179 |
| 180 typedef struct | |
| 181 { | |
| 182 uint8_t year; | |
| 183 uint8_t month; | |
| 184 uint8_t day; | |
| 185 uint8_t hour; | |
| 186 uint8_t min; | |
| 187 uint8_t sec; | |
| 188 }SDateTime; | |
| 189 | |
| 941 | 190 typedef struct |
| 191 { | |
| 192 SGnssCoord coord; | |
| 940 | 193 uint8_t alive; |
| 931 | 194 uint8_t fixType; |
| 195 uint8_t numSat; /* number of available satellites */ | |
| 196 uint8_t signalQual[4]; /* signal quality indicator for x sats */ | |
| 949 | 197 SDateTime DateTime; /* UTC time information */ |
| 931 | 198 } SGnssInfo; |
|
899
2225c467f1e9
Added data path and visualization for position data:
Ideenmodellierer
parents:
868
diff
changeset
|
199 |
| 945 | 200 typedef enum |
| 201 { | |
| 202 SE_INIT = 0, | |
| 203 SE_REINIT, | |
| 204 SE_ACTIVE, | |
| 205 SE_END | |
| 206 } SSlowExitState; | |
| 207 | |
|
899
2225c467f1e9
Added data path and visualization for position data:
Ideenmodellierer
parents:
868
diff
changeset
|
208 |
| 38 | 209 /* struct SLifeData |
| 210 * contains data all actual data (pressure, stuturation, etc. as received from second ship | |
| 211 * and has actualGas to be send to Small CPU (second chip) | |
| 212 * contains data calculated from actual data after receiption from Small CPU | |
| 213 */ | |
| 214 typedef struct | |
| 215 { | |
| 216 /* from Small CPU */ | |
| 780 | 217 uint8_t extIf_sensor_data[3][32]; /* The external sensor may contain a 64 bit ID. It has been placed at the beginning of the structure to avoid problems in alignment */ |
|
752
4f19336a3f21
Dev Bugfix: Alignment problem in lifedata structure:
Ideenmodellierer
parents:
748
diff
changeset
|
218 uint8_t extIf_sensor_map[EXT_INTERFACE_SENSOR_CNT]; |
|
4f19336a3f21
Dev Bugfix: Alignment problem in lifedata structure:
Ideenmodellierer
parents:
748
diff
changeset
|
219 |
| 38 | 220 int32_t dive_time_seconds; |
| 221 int32_t dive_time_seconds_without_surface_time; | |
| 222 uint32_t surface_time_seconds; | |
| 223 float pressure_ambient_bar; | |
| 224 float pressure_surface_bar; | |
| 225 float tissue_nitrogen_bar[16]; | |
| 226 float tissue_helium_bar[16]; | |
| 227 float cns; | |
| 228 float otu; | |
| 229 uint16_t desaturation_time_minutes; | |
| 230 uint16_t no_fly_time_minutes; | |
| 231 float temperature_celsius; | |
| 232 float compass_heading; | |
| 233 float compass_roll; | |
| 234 float compass_pitch; | |
| 235 int16_t compass_DX_f; | |
| 236 int16_t compass_DY_f; | |
| 237 int16_t compass_DZ_f; | |
| 238 uint16_t counterSecondsShallowDepth; | |
| 239 float ascent_rate_meter_per_min; | |
| 240 uint32_t timeBinaryFormat; | |
| 241 uint32_t dateBinaryFormat; | |
| 242 float battery_voltage; | |
| 243 float battery_charge; | |
| 244 uint16_t ambient_light_level; | |
| 245 SDataWireless wireless_data[4]; | |
| 246 uint8_t buttonPICdata[4]; | |
| 662 | 247 SCO2Sensor CO2_data; |
|
714
045ff7800501
Added customizable data area for specific sensor data:
Ideenmodellierer
parents:
672
diff
changeset
|
248 uint8_t extIf_sensor_Id; |
| 38 | 249 |
| 250 /* by create DiveSettings() and by setActualGas() | |
| 251 * is send to Small CPU2 for nitrogen calculation | |
| 252 * includes setpoint information | |
| 253 */ | |
| 254 SGas actualGas; | |
|
771
29d9b5bc7946
Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents:
752
diff
changeset
|
255 |
| 38 | 256 uint8_t lastDiluent_GasIdInSettings; |
|
771
29d9b5bc7946
Revised automatic setpoint change. The proposed approach is essentially the approach used by most controllers of eCCR ('upshift' on descent, 'downshift' on ascent), so that the OSTC4 when used as a backup computer for eCCR will make the changes at the same time as the eCCR itself.
heinrichsweikamp
parents:
752
diff
changeset
|
257 float lastSetpointChangeDepthM; |
|
788
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
780
diff
changeset
|
258 bool setpointDecoActivated; |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
780
diff
changeset
|
259 bool setpointLowDelayed; |
| 38 | 260 |
| 261 /* calculated by DataEX_copy_to_LifeData() | |
| 262 bottle_bar array size is made like this to have multiples of 32bit | |
| 263 */ | |
| 264 float ppO2; | |
| 265 float depth_meter; | |
| 266 float max_depth_meter; | |
| 267 float average_depth_meter; | |
| 268 float apnea_total_max_depth_meter; | |
| 269 float apnea_last_max_depth_meter; | |
| 270 int32_t apnea_last_dive_time_seconds; | |
| 271 uint16_t bottle_bar[2 * NUM_GASES +1]; | |
| 272 uint16_t bottle_bar_age_MilliSeconds[2 * NUM_GASES + 1]; | |
| 273 uint16_t apnea_total_counter; | |
| 274 | |
| 275 /* control of DataEX_copy_to_LifeData() | |
| 276 */ | |
| 277 uint8_t boolResetAverageDepth; | |
| 278 uint8_t bool_temp1; | |
| 279 uint8_t bool_temp2; | |
| 280 | |
| 281 /* from local sensor or direct HUD communication */ | |
| 282 //pp O2 Sensor | |
| 283 float ppO2Sensor_bar[3]; | |
| 284 float sensorVoltage_mV[3]; | |
| 285 float HUD_battery_voltage_V; | |
| 662 | 286 |
| 287 /* for PSCR Mode */ | |
| 288 float ppo2Simulated_bar; | |
|
899
2225c467f1e9
Added data path and visualization for position data:
Ideenmodellierer
parents:
868
diff
changeset
|
289 /* GNSS data */ |
| 931 | 290 SGnssInfo gnssData; |
|
899
2225c467f1e9
Added data path and visualization for position data:
Ideenmodellierer
parents:
868
diff
changeset
|
291 |
| 38 | 292 } SLifeData; |
| 293 | |
| 294 | |
| 295 typedef struct | |
| 296 { | |
| 297 uint16_t tissue_nitrogen_desaturation_time_minutes[16]; | |
| 298 uint16_t tissue_helium_desaturation_time_minutes[16]; | |
| 299 } SLifeData2; | |
| 300 | |
| 301 | |
| 302 typedef struct | |
| 303 { | |
| 304 //warnings | |
| 305 int8_t decoMissed; | |
| 306 int8_t aGf; | |
| 307 int8_t ascentRateHigh; | |
| 308 int8_t ppO2Low; | |
| 309 int8_t ppO2High; | |
| 310 int8_t cnsHigh; | |
| 311 int8_t slowWarning; | |
| 312 int8_t lowBattery; | |
| 313 int8_t numWarnings; | |
| 314 int8_t sensorLinkLost; | |
| 315 int8_t sensorOutOfBounds[3]; | |
| 316 int8_t betterGas; | |
| 317 int8_t fallback; | |
| 318 int8_t betterSetpoint; | |
|
752
4f19336a3f21
Dev Bugfix: Alignment problem in lifedata structure:
Ideenmodellierer
parents:
748
diff
changeset
|
319 int8_t co2High; |
|
478
58200d756365
Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents:
309
diff
changeset
|
320 #ifdef ENABLE_BOTTLE_SENSOR |
|
58200d756365
Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents:
309
diff
changeset
|
321 int8_t newPressure; |
|
58200d756365
Development option only: Show Pressure update for a short time in the custom field (as warning)
ideenmodellierer
parents:
309
diff
changeset
|
322 #endif |
| 857 | 323 #ifdef HAVE_DEBUG_WARNINGS |
| 324 int8_t debug; | |
| 325 #endif | |
| 38 | 326 } SWarnings; |
| 327 | |
| 328 | |
| 329 typedef struct | |
| 330 { | |
| 331 //Events logbook only | |
| 332 int16_t manualMarker; | |
| 333 int16_t gasChange; | |
| 334 int16_t info_GasChange; | |
| 335 int16_t setpointChange; | |
| 336 int16_t info_SetpointChange; | |
| 281 | 337 int16_t manualGasSet; |
| 338 int16_t info_manualGasSetHe; | |
| 339 int16_t info_manualGasSetO2; | |
| 38 | 340 int16_t bailout; |
| 341 int16_t info_bailoutHe; | |
| 342 int16_t info_bailoutO2; | |
|
929
63c340abd70e
Add a line to the compass heading dive menu that shows the currently set heading to enable the
heinrichsweikamp
parents:
925
diff
changeset
|
343 int16_t compassHeadingUpdate; |
|
63c340abd70e
Add a line to the compass heading dive menu that shows the currently set heading to enable the
heinrichsweikamp
parents:
925
diff
changeset
|
344 uint16_t info_compassHeadingUpdate; |
| 941 | 345 int16_t gnssPositionUpdate; |
| 346 SGnssCoord info_gnssPosition; | |
|
1014
8c0134a287da
Add a log data event to the scrubber timer at the start of the dive and every time the timer (in minutes)
heinrichsweikamp
parents:
996
diff
changeset
|
347 int16_t scrubberState; |
|
8c0134a287da
Add a log data event to the scrubber timer at the start of the dive and every time the timer (in minutes)
heinrichsweikamp
parents:
996
diff
changeset
|
348 uint16_t info_scrubberState; |
|
929
63c340abd70e
Add a line to the compass heading dive menu that shows the currently set heading to enable the
heinrichsweikamp
parents:
925
diff
changeset
|
349 } SEvents; |
| 38 | 350 |
| 351 | |
| 352 | |
| 353 //struct SDiveSettings | |
| 354 //contains settings necessary for deco calculation | |
| 355 typedef struct | |
| 356 { | |
| 357 float last_stop_depth_bar; | |
| 358 float input_next_stop_increment_depth_bar; | |
| 359 float input_second_to_last_stop_depth_bar; | |
| 360 float ascentRate_meterperminute; | |
| 361 uint8_t diveMode; /* OC, CC, .. */ | |
| 362 uint8_t CCR_Mode; | |
| 363 uint8_t future_TTS_minutes; | |
| 364 | |
| 365 /* If beginning of dive is CCR than ccrOption is set true | |
| 366 * true allows returning from bailout (OC) back to CCR | |
| 367 * true activates CC gas and setpoint pages in dive menu | |
| 368 */ | |
| 369 uint8_t ccrOption; | |
| 370 uint8_t fallbackOption; | |
| 371 uint8_t ppo2sensors_deactivated; | |
| 372 | |
| 373 split2x4_Type deco_type; /* GF or VPM for standard and alternative seperate */ | |
| 374 | |
| 375 /* VPM conservatism, do not change during dive!!! | |
| 376 * do not change in between dives otherwise repetitve dive is not possible | |
| 377 */ | |
| 378 uint8_t vpm_conservatism; | |
| 379 | |
| 902 | 380 /* VPM table mode, do not change during dive!!! |
| 381 */ | |
| 382 uint8_t vpm_tableMode; | |
| 383 | |
| 38 | 384 /* B�hlmann GF |
| 385 * and a variable that is used by Buehlmann during the dive | |
| 386 * to remember the position of GF low during ascend | |
| 387 */ | |
| 388 uint8_t gf_high; | |
| 389 uint8_t gf_low; | |
| 390 | |
| 391 /* copy of the Settings GasList and SetpintList | |
| 392 * that can be modified during the dive | |
| 393 * especially gases can be actived and deactivated | |
| 394 * gas[0] and setpoint[0] are the special ones configurable during the dive | |
| 395 */ | |
| 396 SGasLine gas[1 + (2*NUM_GASES)]; | |
| 397 SSetpointLine setpoint[1 + NUM_GASES]; | |
| 398 | |
| 399 /* List of GasChanges in the actual order | |
| 400 * this is necessary for VPM and Buehlmann and will be created on start of each calculation | |
| 401 */ | |
| 402 SGas decogaslist[BUEHLMANN_STRUCT_MAX_GASES]; // unused filled with 0xFF | |
| 403 | |
| 404 /* | |
| 405 */ | |
| 406 float internal__pressure_first_stop_ambient_bar_as_upper_limit_for_gf_low_otherwise_zero; | |
| 407 uint16_t compassHeading; | |
| 662 | 408 |
| 409 uint8_t pscr_o2_drop; | |
| 410 uint8_t pscr_lung_ratio; | |
|
834
2a8af51ab04d
Added event based display changes for big font view:
Ideenmodellierer
parents:
805
diff
changeset
|
411 |
|
2a8af51ab04d
Added event based display changes for big font view:
Ideenmodellierer
parents:
805
diff
changeset
|
412 uint32_t activeAFViews; |
| 38 | 413 } SDiveSettings; |
| 414 | |
| 415 enum CHARGE_STATUS{ | |
| 416 CHARGER_off = 0, | |
| 417 CHARGER_running, | |
| 418 CHARGER_complete, | |
| 419 CHARGER_lostConnection | |
| 420 }; | |
| 421 | |
|
805
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
799
diff
changeset
|
422 typedef enum { |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
799
diff
changeset
|
423 TIMER_STATE_OFF = 0, |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
799
diff
changeset
|
424 TIMER_STATE_PRESTART, |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
799
diff
changeset
|
425 TIMER_STATE_RUNNING, |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
799
diff
changeset
|
426 TIMER_STATE_WAIT_FINISHED, |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
799
diff
changeset
|
427 TIMER_STATE_FINISHED, |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
799
diff
changeset
|
428 } timerState_e; |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
799
diff
changeset
|
429 |
| 38 | 430 typedef struct |
| 431 { | |
| 432 SDiveSettings diveSettings; | |
| 433 SLifeData lifeData; | |
| 434 SVpm vpm; | |
| 435 SEvents events; | |
| 436 SWarnings warnings; | |
| 437 SDecoinfo decolistVPM; | |
| 438 SDecoinfo decolistFutureVPM; | |
| 439 SDecoinfo decolistBuehlmann; // | |
| 440 SDecoinfo decolistFutureBuehlmann; | |
| 441 uint8_t mode; /* hw for sleep, surface, dive, .. */ | |
| 442 uint8_t chargeStatus; | |
| 443 uint8_t data_old__lost_connection_to_slave; | |
| 444 | |
| 445 uint32_t pressure_uTick_new; | |
| 446 uint32_t compass_uTick_new; | |
| 447 | |
| 448 uint32_t pressure_uTick_old; | |
| 449 uint32_t compass_uTick_old; | |
| 450 | |
| 451 uint32_t pressure_uTick_local_new; | |
| 452 uint32_t compass_uTick_local_new; | |
| 453 | |
| 454 uint8_t cnsHigh_at_the_end_of_dive; | |
| 455 uint8_t decoMissed_at_the_end_of_dive; | |
| 456 | |
| 457 uint8_t sensorErrorsRTE; | |
| 458 | |
| 459 uint8_t lastKnownBatteryPercentage; | |
|
805
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
799
diff
changeset
|
460 |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
799
diff
changeset
|
461 timerState_e timerState; |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
799
diff
changeset
|
462 int timerStartedS; |
| 925 | 463 |
| 464 SScrubberData scrubberDataDive[2]; | |
| 38 | 465 } SDiveState; |
| 466 | |
| 467 | |
| 468 typedef struct{ | |
| 469 uint8_t bit0:1; | |
| 470 uint8_t bit1:1; | |
| 471 uint8_t bit2:1; | |
| 472 uint8_t bit3:1; | |
| 473 uint8_t bit4:1; | |
| 474 uint8_t bit5:1; | |
| 475 uint8_t bit6:1; | |
| 476 uint8_t bit7:1; | |
| 477 } ubit8_t; | |
| 478 | |
| 479 typedef union{ | |
| 480 ubit8_t ub; | |
| 481 uint8_t uw; | |
| 482 } bit8_Type; | |
| 483 | |
| 484 extern SDiveState stateSim; | |
| 485 extern SDiveState stateDeco; | |
| 486 extern uint8_t decoLock; | |
|
271
1303747b5ba2
cleanup: also write gas and setpoint changes in simulator mode
Jan Mulder <jlmulder@xs4all.nl>
parents:
270
diff
changeset
|
487 extern const SDiveState *stateUsed; |
|
1303747b5ba2
cleanup: also write gas and setpoint changes in simulator mode
Jan Mulder <jlmulder@xs4all.nl>
parents:
270
diff
changeset
|
488 extern SDiveState *stateUsedWrite; |
| 38 | 489 |
| 490 enum DECO_LOCK{ | |
| 491 DECO_CALC_running, | |
| 492 DECO_CALC_ready, | |
| 493 DECO_CALC_FINSHED_Buehlmann, | |
| 494 DECO_CALC_FINSHED_vpm, | |
| 495 DECO_CALC_FINSHED_FutureBuehlmann, | |
| 496 DECO_CALC_FINSHED_Futurevpm, | |
| 497 DECO_CALC_init_as_is_start_of_dive, | |
| 498 DECO_CALC_undefined | |
| 499 }; | |
| 500 | |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
714
diff
changeset
|
501 typedef enum |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
714
diff
changeset
|
502 { |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
714
diff
changeset
|
503 SENSOR_NONE, |
| 745 | 504 SENSOR_SEARCH, |
| 733 | 505 SENSOR_OPTIC, |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
714
diff
changeset
|
506 SENSOR_ANALOG, |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
714
diff
changeset
|
507 SENSOR_DIGO2, |
| 796 | 508 SENSOR_DIGO2M, |
| 745 | 509 SENSOR_SENTINEL, |
|
842
c3dd461ca3f9
Migrated Sentinel protocol to new UART structure:
Ideenmodellierer
parents:
834
diff
changeset
|
510 SENSOR_SENTINELM, |
| 745 | 511 SENSOR_TYPE_O2_END, |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
714
diff
changeset
|
512 SENSOR_CO2, |
| 799 | 513 SENSOR_CO2M, |
| 920 | 514 SENSOR_GNSS, |
| 515 SENSOR_GNSSM, | |
| 780 | 516 SENSOR_MUX, |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
714
diff
changeset
|
517 SENSOR_END |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
714
diff
changeset
|
518 } externalInterfaceSensorType; |
|
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
714
diff
changeset
|
519 |
| 745 | 520 #define DVO2_FATAL_INTENSITY_LOW (0x00000001) |
| 521 #define DVO2_FATAL_AMBIENT_HIGH (0x00000002) | |
| 522 #define DVO2_FATAL_REFINT_LOW (0x00000004) | |
| 523 #define DVO2_FATAL_REFAMB_HIGH (0x00000008) | |
| 524 #define DVO2_FATAL_TEMPERATURE (0x00000010) | |
| 525 | |
| 526 #define DVO2_FATAL_ERROR (DVO2_FATAL_INTENSITY_LOW | DVO2_FATAL_AMBIENT_HIGH | DVO2_FATAL_REFINT_LOW | DVO2_FATAL_REFAMB_HIGH | DVO2_FATAL_TEMPERATURE) | |
|
728
5143e927219f
Added sensor map to Firmware <=> RTE inferface:
Ideenmodellierer
parents:
714
diff
changeset
|
527 |
| 38 | 528 uint32_t time_elapsed_ms(uint32_t ticksstart,uint32_t ticksnow); |
| 529 | |
| 530 void set_stateUsedToSim(void); | |
| 531 void set_stateUsedToReal(void); | |
| 532 | |
| 533 _Bool is_stateUsedSetToSim(void); | |
| 534 | |
| 535 const SDiveState * stateRealGetPointer(void); | |
| 536 const SDiveState * stateSimGetPointer(void); | |
| 537 SDiveState * stateRealGetPointerWrite(void); | |
| 538 SDiveState * stateSimGetPointerWrite(void); | |
| 539 const SDevice * stateDeviceGetPointer(void); | |
| 540 SDevice * stateDeviceGetPointerWrite(void); | |
| 541 const SVpmRepetitiveData * stateVpmRepetitiveDataGetPointer(void); | |
| 542 SVpmRepetitiveData * stateVpmRepetitiveDataGetPointerWrite(void); | |
| 543 | |
| 544 void UpdateLifeDataTest(SDiveState * diveState); | |
| 545 | |
| 546 void setSimulationValues(int _ascent_rate_meter_per_min, int _descent_rate_meter_per_min, int _max_depth, int _bottom_time ); | |
| 547 | |
| 548 void createDiveSettings(void); | |
| 549 void copyDiveSettingsToSim(void); | |
| 550 void copyVpmRepetetiveDataToSim(void); | |
| 551 //void fallbackToFixedSetpoints(SLifeData *lifeData); | |
| 552 void setActualGasFirst(SLifeData *lifeData); | |
| 553 void setActualGasAir(SLifeData *lifeData); | |
| 554 void setActualGas(SLifeData *lifeData, uint8_t gasId, uint8_t setpoint_cbar); | |
| 555 void setActualGas_ExtraGas(SLifeData *lifeData, uint8_t oxygen, uint8_t helium, uint8_t setpoint_cbar); | |
| 556 void setActualGas_DM(SLifeData *lifeData, uint8_t gasId, uint8_t setpoint_cbar); | |
| 557 void setWeekday(RTC_DateTypeDef *sDate); | |
| 558 void setDate(RTC_DateTypeDef Sdate); | |
| 559 void setTime(RTC_TimeTypeDef Stime); | |
| 560 void setBatteryPercentage(uint8_t newChargePercentage); | |
| 561 void setButtonResponsiveness(uint8_t *ButtonSensitivyList); | |
| 562 void calibrateCompass(void); | |
|
539
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
478
diff
changeset
|
563 void compass_Inertia(float newHeading); |
|
d784f281833a
Added inertia simulation for compass heading:
Ideenmodellierer
parents:
478
diff
changeset
|
564 float compass_getCompensated(); |
| 38 | 565 void clearDeco(void); |
| 566 void translateDate(uint32_t datetmpreg, RTC_DateTypeDef *sDate); | |
| 567 void translateTime(uint32_t tmpreg, RTC_TimeTypeDef *sTime); | |
| 568 void updateSetpointStateUsed(void); | |
| 569 | |
| 570 uint8_t calc_MOD(uint8_t gasId); | |
| 571 uint8_t calc_MinOD(uint8_t gasId); | |
| 572 //float calc_ppO2(float input_ambient_pressure_bar, SGas* pGas); | |
| 573 int current_second(void); | |
| 574 _Bool vpm_crush(SDiveState* pDiveState); | |
| 575 _Bool deco_zone_reached(void); | |
|
270
2e58a4094770
feature, debug: make simulator write a logbook entry
Jan Mulder <jlmulder@xs4all.nl>
parents:
247
diff
changeset
|
576 void resetEvents(const SDiveState *pStateUsed); |
| 38 | 577 |
| 578 uint32_t crc32c_checksum(uint8_t* message, uint16_t length, uint8_t* message2, uint16_t length2); | |
| 579 uint32_t CRC_CalcBlockCRC(uint32_t *buffer, uint32_t words); | |
| 580 uint32_t CRC_CalcBlockCRC_moreThan768000(uint32_t *buffer1, uint32_t *buffer2, uint32_t words); | |
| 581 | |
| 582 _Bool is_ambient_pressure_close_to_surface(SLifeData *lifeData); | |
| 583 | |
| 662 | 584 uint8_t isLoopMode(uint8_t Mode); |
| 585 | |
|
776
45b8f3c2acce
Add support for a configurable compass declination in a range of -99 to 99 degrees.
heinrichsweikamp
parents:
774
diff
changeset
|
586 bool isCompassCalibrated(void); |
|
929
63c340abd70e
Add a line to the compass heading dive menu that shows the currently set heading to enable the
heinrichsweikamp
parents:
925
diff
changeset
|
587 void logCompassHeading(uint16_t heading); |
|
63c340abd70e
Add a line to the compass heading dive menu that shows the currently set heading to enable the
heinrichsweikamp
parents:
925
diff
changeset
|
588 void clearCompassHeading(void); |
|
774
6169309d6eb9
more menu items for the compass menu: Delete bearing, and reset to land based bearing. I have also re-enabled the real time bearing display in the menu - makes it easier to set the correct bearing. (mikeller)
heinrichsweikamp
parents:
771
diff
changeset
|
589 void setCompassHeading(uint16_t heading); |
|
788
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
780
diff
changeset
|
590 |
|
4abfb8a2a435
Define explicit setpoints for low / high / deco. Add an option to delay the switch to SPlow until all decompression has been cleared. (mikeller)
heinrichsweikamp
parents:
780
diff
changeset
|
591 const SDecoinfo *getDecoInfo(void); |
|
805
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
799
diff
changeset
|
592 |
|
dd7ce655db26
Adds a simple countdown timer, available as a custom view in surface and dive mode.
heinrichsweikamp
parents:
799
diff
changeset
|
593 void disableTimer(void); |
|
868
db92692c014f
Introduce speed dependend coloring of depth:
Ideenmodellierer
parents:
857
diff
changeset
|
594 |
|
db92692c014f
Introduce speed dependend coloring of depth:
Ideenmodellierer
parents:
857
diff
changeset
|
595 uint8_t drawingColor_from_ascentspeed(float speed); |
|
db92692c014f
Introduce speed dependend coloring of depth:
Ideenmodellierer
parents:
857
diff
changeset
|
596 |
| 944 | 597 void convertStringOfDate_DDMMYY(char* pString, uint8_t strLen, uint8_t day, uint8_t month, uint8_t year); |
| 598 void getStringOfFormat_DDMMYY(char* pString, uint8_t strLen); | |
| 949 | 599 void convertUTCToLocal(uint8_t utcHours, uint8_t utcMinutes, uint8_t* pLocalHours, uint8_t* pLocalMinutes); |
| 944 | 600 |
| 945 | 601 uint8_t calculateSlowExit(uint16_t* pCountDownSec, float* pExitDepthMeter, uint8_t* pColor); |
| 944 | 602 |
|
1014
8c0134a287da
Add a log data event to the scrubber timer at the start of the dive and every time the timer (in minutes)
heinrichsweikamp
parents:
996
diff
changeset
|
603 bool isScrubberTimerEnabled(const SSettings *settings); |
|
8c0134a287da
Add a log data event to the scrubber timer at the start of the dive and every time the timer (in minutes)
heinrichsweikamp
parents:
996
diff
changeset
|
604 bool isScrubberTimerRunning(const SDiveState *diveState, const SSettings *settings); |
| 38 | 605 #endif // DATA_CENTRAL_H |