Mercurial > public > ostc4
annotate Documentations/dump-rte.cfg @ 783:c31237d20491
Update digital O2 sensor information:
In the previous version only one digital O2 sensor was supported and the additional data could be accessed via a separate menu item. Because of the intraduction of the multiplexer there are three datasets available not. Because of the existing menu structure it was not possible to add additional menu items. To solve the problem the sensor information has been moved beghind the sensor On/Off functionality. When selecting a sensor the sensor data will be shown and the de-/activation of a sensor may be done in scope of the sensor information dialog.
| author | Ideenmodellierer |
|---|---|
| date | Mon, 29 May 2023 20:26:38 +0200 |
| parents | 01cc5959f199 |
| children |
| rev | line source |
|---|---|
| 34 | 1 #! openocd -f |
| 2 # Define the prob used: | |
| 3 source [find interface/stlink-v2.cfg] | |
| 4 set WORKAREASIZE 0x8000 | |
| 5 transport select hla_swd | |
| 6 | |
| 7 # Reset options | |
| 8 set ENABLE_LOW_POWER 1 | |
| 9 set STOP_WATCHDOG 1 | |
| 10 reset_config srst_only srst_nogate connect_assert_srst | |
| 11 | |
| 12 # Seelct the right chip | |
| 13 set CHIPNAME stm32f411RETx | |
| 14 set CONNECT_UNDER_RESET 1 | |
| 15 source [find target/stm32f4x.cfg] | |
| 16 | |
| 17 # Allow to continue execution after a connection: | |
| 18 init_reset run | |
| 19 | |
| 20 #puts "Flash banks:" | |
| 21 #flash banks | |
| 22 | |
| 23 #puts "Reading..." | |
| 24 #flash dump_image CPU2-RTE-dump.hex 0x00000000 0x8000 | |
| 25 | |
| 26 #puts "Done." | |
| 27 #exit |