Mercurial > public > ostc4
annotate Documentations/dump-rte.cfg @ 220:e524a824d8f2 Improve_IPC_Sync
Added schedule point for functions executed once in a second
SPI communication takes place every 100ms triggered by the master (main). Synchronisation is done using the SPI RX complete callback which is called ~4ms after communication was started. In the previous implementation this could happen in parallel to usage of data. To solve this potential problem the execution of functions called once a second was moved from 1000ms to 980ms giving a 20ms window for execution.
author | ideenmodellierer |
---|---|
date | Sun, 31 Mar 2019 15:49:47 +0200 |
parents | 01cc5959f199 |
children |
rev | line source |
---|---|
34 | 1 #! openocd -f |
2 # Define the prob used: | |
3 source [find interface/stlink-v2.cfg] | |
4 set WORKAREASIZE 0x8000 | |
5 transport select hla_swd | |
6 | |
7 # Reset options | |
8 set ENABLE_LOW_POWER 1 | |
9 set STOP_WATCHDOG 1 | |
10 reset_config srst_only srst_nogate connect_assert_srst | |
11 | |
12 # Seelct the right chip | |
13 set CHIPNAME stm32f411RETx | |
14 set CONNECT_UNDER_RESET 1 | |
15 source [find target/stm32f4x.cfg] | |
16 | |
17 # Allow to continue execution after a connection: | |
18 init_reset run | |
19 | |
20 #puts "Flash banks:" | |
21 #flash banks | |
22 | |
23 #puts "Reading..." | |
24 #flash dump_image CPU2-RTE-dump.hex 0x00000000 0x8000 | |
25 | |
26 #puts "Done." | |
27 #exit |