Mercurial > public > ostc4
annotate Small_CPU/Src/i2c.c @ 298:50c26a4442af cleanup-3
Bugfix: fix drawing of CCR bailout profile
When bailing out to an OC gas from CCR dive mode, the profile was not
drawn correctly in the device internal logbook. It was truncated
from the moment of bailout, and the remaining CCR part of the dive
was stretched over the full dive time.
Yes, a lot of text for a 1 letter fix, but finding the reason of this
bug was not trivial. It appeared to be a parsing error from the
internal logbook, looking at the wrong bit from the extended sample
data on drawing time. The bit that denotes bailout is bit 0, and
not bit 1.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
| author | Jan Mulder <jlmulder@xs4all.nl> |
|---|---|
| date | Thu, 16 May 2019 14:02:46 +0200 |
| parents | 2b9775f71e30 |
| children | 4fe5400567e7 |
| rev | line source |
|---|---|
| 38 | 1 #include "baseCPU2.h" |
| 2 #include "i2c.h" | |
| 3 #include "scheduler.h" | |
| 4 | |
| 5 /* Private typedef -----------------------------------------------------------*/ | |
| 6 /* Private define ------------------------------------------------------------*/ | |
| 7 /* Private macro -------------------------------------------------------------*/ | |
| 8 | |
| 9 | |
| 10 // =============================================================================== | |
| 11 // I2C addresses - see i2c.h | |
|
165
e9cce686fe41
Minor: Some documentation for new hardware
heinrichsweikamp
parents:
104
diff
changeset
|
12 // =============================================================================== |
| 38 | 13 |
| 14 I2C_HandleTypeDef I2cHandle; | |
| 15 | |
| 16 | |
| 17 /* | |
| 18 static void I2C_Error_Handler(void) | |
| 19 { | |
| 20 while(1) | |
| 21 { | |
| 22 } | |
| 23 } | |
| 24 */ | |
| 25 | |
| 26 GPIO_PinState HAL_I2C_Read_Data_PIN(void) | |
| 27 { | |
| 28 return HAL_GPIO_ReadPin(I2Cx_SDA_GPIO_PORT,I2Cx_SDA_PIN); | |
| 29 } | |
| 30 | |
| 31 void HAL_I2C_Send_One_CLOCK(void) | |
| 32 { | |
| 33 HAL_GPIO_WritePin(I2Cx_SCL_GPIO_PORT, I2Cx_SCL_PIN, GPIO_PIN_RESET); | |
| 34 HAL_Delay(10); | |
| 35 HAL_GPIO_WritePin(I2Cx_SCL_GPIO_PORT, I2Cx_SCL_PIN, GPIO_PIN_SET); | |
| 36 HAL_Delay(10); | |
| 37 } | |
| 38 | |
| 39 GPIO_PinState MX_I2C1_TestAndClear(void) | |
| 40 { | |
| 41 I2C_DeInit(); | |
| 42 HAL_I2C_ManualControl_MspInit(); | |
| 43 for(int i=0; i<9;i++) | |
| 44 { | |
| 45 if(HAL_I2C_Read_Data_PIN() == GPIO_PIN_RESET) | |
| 46 HAL_I2C_Send_One_CLOCK(); | |
| 47 else | |
| 48 break; | |
| 49 } | |
| 50 return HAL_I2C_Read_Data_PIN(); | |
| 51 } | |
| 52 | |
| 53 HAL_StatusTypeDef MX_I2C1_Init(void) | |
| 54 { | |
| 55 I2cHandle.Instance = I2Cx; | |
| 56 I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT; | |
| 104 | 57 I2cHandle.Init.ClockSpeed = 100000;//400000; REDUCED for compatibility with HMC5583L + MMA8452Q |
| 38 | 58 I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLED; |
| 104 | 59 I2cHandle.Init.DutyCycle = I2C_DUTYCYCLE_2; |
| 38 | 60 I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLED; |
| 61 I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLED; | |
| 62 I2cHandle.Init.OwnAddress1 = 0x01; | |
| 63 | |
| 64 global.I2C_SystemStatus = HAL_I2C_Init(&I2cHandle); | |
| 82 | 65 HAL_I2CEx_AnalogFilter_Config(&I2cHandle, I2C_ANALOGFILTER_ENABLED); |
| 100 | 66 HAL_I2CEx_ConfigDigitalFilter(&I2cHandle,0x0F); |
| 67 | |
| 68 if(global.dataSendToSlavePending) | |
| 69 { | |
| 70 scheduleSpecial_Evaluate_DataSendToSlave(); | |
| 71 } | |
|
241
2b9775f71e30
cleanup: factor out I2C1_Status() and cleanup type
Jan Mulder <jlmulder@xs4all.nl>
parents:
239
diff
changeset
|
72 return global.I2C_SystemStatus; |
| 38 | 73 } |
| 74 | |
| 75 | |
| 76 void I2C_DeInit(void) | |
| 77 { | |
| 78 HAL_I2C_DeInit(&I2cHandle); | |
| 79 } | |
| 80 | |
|
239
e4207f0aaa4b
cleanup: factor out dataSendToSlaveStopEval
Jan Mulder <jlmulder@xs4all.nl>
parents:
238
diff
changeset
|
81 static uint8_t i2c_errors = 0; |
| 38 | 82 |
| 83 void I2C_Error_count(void) | |
| 84 { | |
| 85 i2c_errors++; | |
| 86 } | |
| 87 | |
| 88 HAL_StatusTypeDef I2C_Master_Transmit( uint16_t DevAddress, uint8_t *pData, uint16_t Size) | |
| 89 { | |
| 90 if(global.I2C_SystemStatus != HAL_OK) | |
|
238
a9d798e8c11f
cleanup, bugfix: do not mask I2C_SystemStatus with local variable
Jan Mulder <jlmulder@xs4all.nl>
parents:
182
diff
changeset
|
91 return global.I2C_SystemStatus; |
| 38 | 92 |
| 182 | 93 global.I2C_SystemStatus = HAL_I2C_Master_Transmit(&I2cHandle, DevAddress, pData, Size, 2); |
| 38 | 94 if(global.I2C_SystemStatus != HAL_OK) |
| 95 { | |
| 96 I2C_Error_count(); | |
| 97 } | |
| 88 | 98 |
|
241
2b9775f71e30
cleanup: factor out I2C1_Status() and cleanup type
Jan Mulder <jlmulder@xs4all.nl>
parents:
239
diff
changeset
|
99 return global.I2C_SystemStatus; |
| 38 | 100 } |
| 101 | |
| 102 HAL_StatusTypeDef I2C_Master_Receive( uint16_t DevAddress, uint8_t *pData, uint16_t Size) | |
| 103 { | |
| 104 if(global.I2C_SystemStatus != HAL_OK) | |
|
238
a9d798e8c11f
cleanup, bugfix: do not mask I2C_SystemStatus with local variable
Jan Mulder <jlmulder@xs4all.nl>
parents:
182
diff
changeset
|
105 return global.I2C_SystemStatus; |
| 38 | 106 |
|
238
a9d798e8c11f
cleanup, bugfix: do not mask I2C_SystemStatus with local variable
Jan Mulder <jlmulder@xs4all.nl>
parents:
182
diff
changeset
|
107 global.I2C_SystemStatus = HAL_I2C_Master_Receive(&I2cHandle, DevAddress, pData, Size, 10); |
|
a9d798e8c11f
cleanup, bugfix: do not mask I2C_SystemStatus with local variable
Jan Mulder <jlmulder@xs4all.nl>
parents:
182
diff
changeset
|
108 if(global.I2C_SystemStatus != HAL_OK) |
| 38 | 109 { |
| 110 I2C_Error_count(); | |
| 111 } | |
| 112 | |
|
238
a9d798e8c11f
cleanup, bugfix: do not mask I2C_SystemStatus with local variable
Jan Mulder <jlmulder@xs4all.nl>
parents:
182
diff
changeset
|
113 return global.I2C_SystemStatus; |
| 38 | 114 } |