Mercurial > public > ostc4
annotate Documentations/dump-rte.cfg @ 824:2a9a47547b05 Evo_2_23
Bugfix Flipscreen visualization:
In Timer and CCR overview the free custom fram coordinates were not initialized. Depending on which view was activ before the coordinates of the former view were used and sometimes resulting in a bad visualization. To fix the problem the coordinates are now initialized by the views.
The top menu bar text in the flip view did not consider spacings in the text position calculation causing an offset between color bar and text. The offset has been corrected.
author | Ideenmodellierer |
---|---|
date | Mon, 09 Oct 2023 16:50:11 +0200 |
parents | 01cc5959f199 |
children |
rev | line source |
---|---|
34 | 1 #! openocd -f |
2 # Define the prob used: | |
3 source [find interface/stlink-v2.cfg] | |
4 set WORKAREASIZE 0x8000 | |
5 transport select hla_swd | |
6 | |
7 # Reset options | |
8 set ENABLE_LOW_POWER 1 | |
9 set STOP_WATCHDOG 1 | |
10 reset_config srst_only srst_nogate connect_assert_srst | |
11 | |
12 # Seelct the right chip | |
13 set CHIPNAME stm32f411RETx | |
14 set CONNECT_UNDER_RESET 1 | |
15 source [find target/stm32f4x.cfg] | |
16 | |
17 # Allow to continue execution after a connection: | |
18 init_reset run | |
19 | |
20 #puts "Flash banks:" | |
21 #flash banks | |
22 | |
23 #puts "Reading..." | |
24 #flash dump_image CPU2-RTE-dump.hex 0x00000000 0x8000 | |
25 | |
26 #puts "Done." | |
27 #exit |