Mercurial > public > ostc4
annotate Documentations/dump-rte.cfg @ 627:189f945ae4ba
Improve in / out of focus transitions:
Added a function which detects if the yaw value changed significant while in focus state. This event is typically pointing to a arm movment => diver is no longer focussing at the OSTC.
Improve custom view mapping:
Added a direction indicator to the focus distance value (now +/- values instead of absolut values before). With this modification custom view sectors may have the double size and are threrfore easier to be controlled.
author | Ideenmodellierer |
---|---|
date | Fri, 12 Feb 2021 21:43:27 +0100 |
parents | 01cc5959f199 |
children |
rev | line source |
---|---|
34 | 1 #! openocd -f |
2 # Define the prob used: | |
3 source [find interface/stlink-v2.cfg] | |
4 set WORKAREASIZE 0x8000 | |
5 transport select hla_swd | |
6 | |
7 # Reset options | |
8 set ENABLE_LOW_POWER 1 | |
9 set STOP_WATCHDOG 1 | |
10 reset_config srst_only srst_nogate connect_assert_srst | |
11 | |
12 # Seelct the right chip | |
13 set CHIPNAME stm32f411RETx | |
14 set CONNECT_UNDER_RESET 1 | |
15 source [find target/stm32f4x.cfg] | |
16 | |
17 # Allow to continue execution after a connection: | |
18 init_reset run | |
19 | |
20 #puts "Flash banks:" | |
21 #flash banks | |
22 | |
23 #puts "Reading..." | |
24 #flash dump_image CPU2-RTE-dump.hex 0x00000000 0x8000 | |
25 | |
26 #puts "Done." | |
27 #exit |