Mercurial > public > hwos_code
annotate src/ghostwriter.asm @ 604:ca4556fb60b9
bump to 2.99beta, work on 3.00 stable
| author | heinrichsweikamp |
|---|---|
| date | Thu, 22 Nov 2018 19:47:26 +0100 |
| parents | 08a0162d3ca1 |
| children | c40025d8e750 |
| rev | line source |
|---|---|
| 0 | 1 ;============================================================================= |
| 2 ; | |
| 604 | 3 ; File ghostwriter.asm REFACTORED VERSION V2.99a |
| 0 | 4 ; |
| 5 ; Ghostwriter (Log profile recorder) | |
| 6 ; | |
| 7 ; Copyright (c) 2011, JD Gascuel, HeinrichsWeikamp, all right reserved. | |
| 8 ;============================================================================= | |
| 9 ; HISTORY | |
| 10 ; 2011-11-27 : [mH] Creation | |
| 11 | |
| 582 | 12 #include "hwos.inc" ; Mandatory header |
| 13 #include "shared_definitions.h" ; Mailbox from/to p2_deco.c | |
| 14 #include "external_flash.inc" | |
| 15 #include "surfmode.inc" | |
| 16 #include "eeprom_rs232.inc" | |
| 17 #include "strings.inc" | |
| 18 #include "isr.inc" | |
| 19 #include "tft_outputs.inc" | |
| 20 #include "divemode.inc" | |
| 21 #include "rtc.inc" | |
| 22 | |
| 604 | 23 extern deco_pull_tissues_from_vault |
| 24 | |
| 582 | 25 |
| 26 ;---- Private local variables ------------------------------------------------- | |
| 27 | |
| 604 | 28 CBLOCK local3 ; max size is 16 Byte !!! |
| 582 | 29 divisor_temperature ; divisor used to time the sampling of dive data |
| 30 divisor_deco ; divisor used to time the sampling of dive data | |
| 31 divisor_gf ; divisor used to time the sampling of dive data | |
| 32 divisor_ppo2_sensors ; divisor used to time the sampling of dive data | |
| 33 divisor_decoplan ; divisor used to time the sampling of dive data | |
| 34 divisor_cns ; divisor used to time the sampling of dive data | |
| 35 divisor_tank ; divisor used to time the sampling of dive data | |
| 36 ProfileFlagByte ; used to store events | |
| 37 ENDC ; used: 8 byte, remaining: 8 byte | |
| 38 | |
| 39 | |
| 40 ghostwriter CODE | |
| 41 | |
| 42 ;============================================================================= | |
| 43 | |
| 0 | 44 |
| 604 | 45 global init_recording_params ; initialize profile recording parameters |
| 582 | 46 init_recording_params: |
| 47 movff samplingrate,samplesecs_value; to avoid EEPROM access in the ISR | |
| 48 movlw div_temperature | |
| 49 movwf divisor_temperature ; load divisors for profile storage | |
| 50 movlw div_deco | |
| 51 movwf divisor_deco | |
| 52 movlw div_gf | |
| 53 movwf divisor_gf | |
| 54 movlw div_ppo2_sensors | |
| 55 movwf divisor_ppo2_sensors | |
| 56 movlw div_decoplan | |
| 57 movwf divisor_decoplan | |
| 58 movlw div_cns | |
| 59 movwf divisor_cns | |
| 60 movlw div_tank | |
| 61 movwf divisor_tank | |
| 604 | 62 btfss FLAG_apnoe_mode ; in Apnoe mode? |
| 582 | 63 bra init_recording_params_1 ; NO |
| 64 movlw samplingrate_apnoe ; YES - overwrite some parameters in Apnoe mode | |
| 65 movwf samplesecs_value ; to avoid EEPROM access in the ISR | |
| 66 init_recording_params_1: | |
| 67 btfsc FLAG_ccr_mode ; in CCR mode? | |
| 68 bra init_recording_params_2 ; YES | |
| 69 btfsc FLAG_pscr_mode ; in pSCR mode? | |
| 70 bra init_recording_params_2 ; YES | |
| 604 | 71 ; in all modes but CCR and pSCR, disable ppO2 logging |
| 582 | 72 movlw .0 |
| 73 movwf divisor_ppo2_sensors | |
| 74 init_recording_params_2: | |
| 75 return | |
| 76 | |
| 0 | 77 |
| 78 global store_dive_data | |
| 560 | 79 store_dive_data: |
| 582 | 80 bcf store_sample ; clear flag |
| 0 | 81 |
| 582 | 82 ifndef __DEBUG |
| 604 | 83 btfsc simulatormode_active ; are we in simulator mode? |
| 84 return ; YES - discard everything | |
| 582 | 85 endif |
| 0 | 86 |
| 604 | 87 btfsc FLAG_apnoe_mode ; in Apnoe mode? |
| 88 return ; YES - discard everything | |
|
35
eca4a201d8cf
change apnea timeout, do no longer store apnea dives in logbook
heinrichsweikamp
parents:
23
diff
changeset
|
89 |
| 582 | 90 SAFE_2BYTE_COPY rel_pressure, lo |
| 91 movf lo,W ; store depth with every sample | |
| 604 | 92 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 0 | 93 movf hi,W |
| 604 | 94 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 0 | 95 |
| 604 | 96 ; First, find out how many bytes will be appended to this sample set |
| 582 | 97 clrf ProfileFlagByte ; clear number of bytes to append |
| 0 | 98 |
| 582 | 99 ; Check Extended informations |
| 604 | 100 decfsz divisor_temperature,W ; check divisor |
| 582 | 101 bra check_extended1 |
| 0 | 102 movlw infolength_temperature |
| 582 | 103 addwf ProfileFlagByte,F ; add to ProfileFlagByte |
| 0 | 104 check_extended1: |
| 604 | 105 decfsz divisor_deco,W ; check divisor |
| 582 | 106 bra check_extended2 |
| 0 | 107 movlw infolength_deco |
| 582 | 108 addwf ProfileFlagByte,F ; add to ProfileFlagByte |
| 0 | 109 check_extended2: |
| 604 | 110 decfsz divisor_gf,W ; check divisor |
| 582 | 111 bra check_extended3 |
| 0 | 112 movlw infolength_gf |
| 582 | 113 addwf ProfileFlagByte,F ; add to ProfileFlagByte |
| 0 | 114 check_extended3: |
| 604 | 115 decfsz divisor_ppo2_sensors,W ; check divisor |
| 582 | 116 bra check_extended4 |
| 0 | 117 movlw infolength_ppo2_sensors |
| 582 | 118 addwf ProfileFlagByte,F ; add to ProfileFlagByte |
| 0 | 119 check_extended4: |
| 604 | 120 decfsz divisor_decoplan,W ; check divisor |
| 582 | 121 bra check_extended5 |
| 0 | 122 movlw infolength_decoplan |
| 582 | 123 addwf ProfileFlagByte,F ; add to ProfileFlagByte |
| 0 | 124 check_extended5: |
| 604 | 125 decfsz divisor_cns,W ; check divisor |
| 582 | 126 bra check_extended6 |
| 0 | 127 movlw infolength_cns |
| 582 | 128 addwf ProfileFlagByte,F ; add to ProfileFlagByte |
| 0 | 129 check_extended6: |
| 604 | 130 decfsz divisor_tank,W ; check divisor |
| 0 | 131 bra check_extended7 |
| 132 movlw infolength_tank | |
| 582 | 133 addwf ProfileFlagByte,F ; add to ProfileFlagByte |
| 0 | 134 check_extended7: |
| 135 | |
| 136 ; Second, check global event flag | |
| 604 | 137 btfss event_occured ; check global event flag |
| 138 bra store_dive_data3 ; no event | |
|
99
87cc1adfe4da
show event "bailout" in the internal logbook
heinrichsweikamp
parents:
98
diff
changeset
|
139 |
| 604 | 140 incf ProfileFlagByte,F ; add one byte (the EventByte1) |
| 0 | 141 |
| 582 | 142 clrf EventByte1 ; reset EventByte1 |
| 143 clrf EventByte2 ; reset EventByte2 | |
| 0 | 144 |
| 604 | 145 movf AlarmType,W ; type of Alarm Bit 0-3 |
| 146 addwf EventByte1,F ; copy to EventByte1 Bit 0-3 | |
| 147 clrf AlarmType ; reset AlarmType | |
| 582 | 148 |
| 560 | 149 ; Third, check events and add additional bytes |
| 604 | 150 btfss gas6_changed ; check flag |
| 0 | 151 bra check_event2 |
| 604 | 152 movlw d'2' ; information length |
| 582 | 153 addwf ProfileFlagByte,F ; add to ProfileFlagByte |
| 604 | 154 bsf EventByte1,4 ; also set Flag in EventByte1! |
| 0 | 155 check_event2: |
| 604 | 156 btfss stored_gas_changed ; check flag |
| 0 | 157 bra check_event3 |
| 604 | 158 movlw d'1' ; information length |
| 582 | 159 addwf ProfileFlagByte,F ; add to ProfileFlagByte |
| 604 | 160 bsf EventByte1,5 ; also set Flag in EventByte1! |
| 0 | 161 check_event3: |
| 604 | 162 btfss setpoint_changed ; check flag |
| 0 | 163 bra check_event4 |
| 604 | 164 movlw d'1' ; information length |
| 582 | 165 addwf ProfileFlagByte,F ; add to ProfileFlagByte |
| 604 | 166 bsf EventByte1,6 ; also set Flag in EventByte1! |
| 0 | 167 check_event4: |
| 582 | 168 btfss bailoutgas_event ; =1: bailout was selected or a gas change during bailout |
| 169 bra check_event5 | |
| 604 | 170 movlw d'2' ; information length |
| 582 | 171 addwf ProfileFlagByte,F ; add to ProfileFlagByte |
| 172 bsf EventByte2,0 ; set flag in EventByte2! | |
| 604 | 173 bsf EventByte1,7 ; =1: another EventByte1 is available |
| 98 | 174 |
| 175 check_event5: | |
| 0 | 176 ; more events? |
| 177 | |
| 178 store_dive_data3: | |
| 582 | 179 btfsc EventByte1,7 ; =1: Another EventByte1 is available |
| 180 incf ProfileFlagByte,F ; add one byte (The EventByte2) | |
| 98 | 181 |
| 604 | 182 btfsc event_occured ; check global event flag |
| 183 bsf ProfileFlagByte,7 ; set EventByte1 flag in ProfileFlagByte | |
| 98 | 184 |
| 604 | 185 movf ProfileFlagByte,W ; finally, write ProfileFlagByte |
| 186 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 98 | 187 |
| 604 | 188 btfss event_occured ; check global event flag (again) |
| 189 bra store_dive_data4 ; no event | |
| 98 | 190 |
| 191 ; Store the EventByte(s) + additional bytes now | |
| 582 | 192 movf EventByte1,W |
| 604 | 193 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 0 | 194 |
| 604 | 195 movf EventByte2,W ; write second event byte... |
| 196 btfsc EventByte1,7 ; =1: another EventByte1 is available | |
| 197 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 0 | 198 |
| 604 | 199 btfss gas6_changed ; check flag |
| 0 | 200 bra store_dive_data3b |
| 582 | 201 movff char_I_O2_ratio,WREG ; store gas 6 o2 ratio |
| 604 | 202 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 582 | 203 movff char_I_He_ratio,WREG ; store gas 6 He ratio |
| 604 | 204 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 205 bcf gas6_changed ; clear this event | |
| 0 | 206 store_dive_data3b: |
| 604 | 207 btfss stored_gas_changed ; check flag |
| 0 | 208 bra store_dive_data3c |
| 604 | 209 movf active_dil,W ; store active diluent (default, may be overwritten soon) |
| 210 btfsc FLAG_oc_mode ; in OC mode? | |
| 211 movf active_gas,W ; YES - store active gas | |
| 212 btfsc FLAG_bailout_mode ; in bailout? | |
| 213 movf active_gas,W ; YES - store active OC = bailout gas | |
| 214 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 215 bcf stored_gas_changed ; clear this event | |
| 0 | 216 store_dive_data3c: |
| 604 | 217 btfss setpoint_changed ; check flag |
| 0 | 218 bra store_dive_data3d |
| 582 | 219 movff char_I_const_ppO2,WREG ; store setpoint |
| 604 | 220 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 221 bcf setpoint_changed ; clear this event | |
| 0 | 222 store_dive_data3d: |
| 604 | 223 btfss bailoutgas_event ; check flag |
| 582 | 224 bra store_dive_data4 |
| 225 movff char_I_O2_ratio,WREG ; store O2 ratio of bailout gas | |
| 604 | 226 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 582 | 227 movff char_I_He_ratio,WREG ; store He ratio of bailout gas |
| 604 | 228 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 229 bcf bailoutgas_event ; clear this event | |
| 0 | 230 |
| 231 store_dive_data4: | |
| 604 | 232 ; Store extended information |
| 233 decfsz divisor_temperature,F ; check divisor | |
| 0 | 234 bra store_extended1 |
| 235 rcall store_dive_temperature | |
| 236 store_extended1: | |
| 604 | 237 decfsz divisor_deco,F ; check divisor |
| 0 | 238 bra store_extended2 |
| 239 rcall store_dive_decodata | |
| 240 store_extended2: | |
| 604 | 241 decfsz divisor_gf,F ; check divisor |
| 582 | 242 bra store_extended3 |
| 0 | 243 rcall store_dive_gf |
| 244 store_extended3: | |
| 604 | 245 decfsz divisor_ppo2_sensors,F ; check divisor |
| 582 | 246 bra store_extended4 |
| 0 | 247 rcall store_dive_ppO2_sensors |
| 248 store_extended4: | |
| 604 | 249 decfsz divisor_decoplan,F ; check divisor |
| 582 | 250 bra store_extended5 |
| 0 | 251 rcall store_dive_decoplan |
| 252 store_extended5: | |
| 604 | 253 decfsz divisor_cns,F ; check divisor |
| 582 | 254 bra store_extended6 |
| 0 | 255 rcall store_dive_cns |
| 256 store_extended6: | |
| 604 | 257 decfsz divisor_tank,F ; check divisor |
| 0 | 258 bra store_extended7 |
| 259 rcall store_dive_tank | |
| 260 store_extended7: | |
| 261 | |
| 262 ; The next block is required to take care of "store never" | |
| 604 | 263 btfsc divisor_temperature,7 ; test highest bit (register must have been zero before the "decfsz" command!) |
| 264 clrf divisor_temperature ; and clear register again, so it will never reach zero... | |
| 0 | 265 btfsc divisor_deco,7 |
| 266 clrf divisor_deco | |
| 267 btfsc divisor_gf,7 | |
| 268 clrf divisor_gf | |
| 269 btfsc divisor_ppo2_sensors,7 | |
| 270 clrf divisor_ppo2_sensors | |
| 271 btfsc divisor_decoplan,7 | |
| 272 clrf divisor_decoplan | |
| 273 btfsc divisor_cns,7 | |
| 274 clrf divisor_cns | |
| 275 btfsc divisor_tank,7 | |
| 276 clrf divisor_tank | |
| 277 | |
| 278 store_dive_data5: | |
| 604 | 279 bcf event_occured ; clear the global event flag |
| 582 | 280 clrf EventByte1 ; reset EventByte1 |
| 281 clrf EventByte2 ; reset EventByte2 | |
| 604 | 282 return ; done (sample with all informations written to external flash) |
| 582 | 283 |
| 0 | 284 store_dive_cns: |
| 285 movff int_O_CNS_fraction+0,WREG | |
| 604 | 286 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 0 | 287 movff int_O_CNS_fraction+1,WREG |
| 604 | 288 bcf WREG,int_warning_flag ; clear warning flag |
| 289 bcf WREG,int_attention_flag ; clear attention flag | |
| 290 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 0 | 291 movlw div_cns |
| 604 | 292 movwf divisor_cns ; reload divisor from CF |
| 0 | 293 return |
| 294 | |
| 295 store_dive_tank: | |
| 604 | 296 ; OSTC TR tank pressure logging |
| 0 | 297 movlw div_tank |
| 604 | 298 movwf divisor_tank ; reload divisor from CF |
| 0 | 299 return |
| 300 | |
| 301 store_dive_decoplan: | |
| 582 | 302 ; Store the deco plan |
| 303 lfsr FSR1,char_O_deco_time_for_log+.0 | |
| 304 movlw .15 | |
| 305 movwf lo | |
| 0 | 306 store_dive_decoplan_loop: |
| 582 | 307 movf POSTINC1,W |
| 604 | 308 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 582 | 309 decfsz lo,F |
| 310 bra store_dive_decoplan_loop | |
| 0 | 311 movlw div_decoplan |
| 604 | 312 movwf divisor_decoplan ; reload divisor from CF |
| 0 | 313 return |
| 314 | |
| 315 store_dive_ppO2_sensors: | |
| 604 | 316 movf o2_ppo2_sensor1,W ; Sensor1 ppO2 (in 0.01 bar steps) |
| 317 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 318 SAFE_2BYTE_COPY o2_mv_sensor1,lo ; o2_mv_sensor may be modified via ISR during the two writes here... | |
| 319 movf lo,W ; in 0.1 mV steps | |
| 320 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 321 movf hi,W ; in 0.1 mV steps | |
| 322 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 0 | 323 |
| 604 | 324 movf o2_ppo2_sensor2,W ; Sensor2 ppO2 (in 0.01 bar steps) |
| 325 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 326 SAFE_2BYTE_COPY o2_mv_sensor2,lo ; o2_mv_sensor may be modified via ISR during the two writes here... | |
| 327 movf lo,W ; in 0.1 mV steps | |
| 328 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 329 movf hi,W ; in 0.1 mV steps | |
| 330 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 0 | 331 |
| 604 | 332 movf o2_ppo2_sensor3,W ; Sensor3 ppO2 (in 0.01 bar steps) |
| 333 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 334 SAFE_2BYTE_COPY o2_mv_sensor3,lo ; o2_mv_sensor may be modified via ISR during the two writes here... | |
| 335 movf lo,W ; in 0.1 mV steps | |
| 336 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 337 movf hi,W ; in 0.1 mV steps | |
| 338 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 0 | 339 |
| 340 movlw div_ppo2_sensors | |
| 604 | 341 movwf divisor_ppo2_sensors ; reload divisor |
| 0 | 342 return |
| 343 | |
| 344 store_dive_gf: | |
| 604 | 345 movff int_O_gradient_factor+0,WREG ; gradient factor absolute (range is limited to 255, only lower byte used for value) |
| 346 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 0 | 347 movlw div_gf |
| 604 | 348 movwf divisor_gf ; reload divisor |
| 0 | 349 return |
| 350 | |
| 351 store_dive_decodata: | |
| 582 | 352 ; Check if deco stops are necessary |
| 604 | 353 movff char_O_first_deco_depth,WREG ; get ceiling |
| 354 tstfsz WREG ; ceiling < 0 m (aka in deco) ? | |
| 355 bra store_dive_decodata_deco ; YES | |
| 582 | 356 ; NO - within NDL |
| 604 | 357 clrf WREG ; =0: no stop dive |
| 358 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 359 movff char_O_nullzeit,WREG ; remaining NDL time | |
| 360 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 582 | 361 bra store_dive_decodata_common |
| 362 store_dive_decodata_deco: | |
| 363 ; YES - in deco | |
| 604 | 364 movff char_O_first_deco_depth,WREG ; ceiling in m |
| 365 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 366 movff char_O_first_deco_time,WREG ; length of first stop in minutes | |
| 367 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 582 | 368 store_dive_decodata_common: |
| 0 | 369 movlw div_deco |
| 604 | 370 movwf divisor_deco ; Reload divisor |
| 0 | 371 return |
| 372 | |
| 373 store_dive_temperature: | |
| 582 | 374 SAFE_2BYTE_COPY temperature,lo |
| 604 | 375 movf lo,W ; append temperature to current sample! |
| 376 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 0 | 377 movf hi,W |
| 604 | 378 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 0 | 379 movlw div_temperature |
| 604 | 380 movwf divisor_temperature ; reload divisor |
| 0 | 381 return |
| 382 | |
| 383 ghostwrite_byte_header: | |
| 604 | 384 goto write_byte_ext_flash_plus_header ; (this call will also delete the 4kB TOC entry first) |
| 582 | 385 ; returns... |
| 0 | 386 |
| 387 ghostwrite_byte_profile: | |
| 604 | 388 goto write_byte_ext_flash_plus ; writes byte and increases address with banking at 0x200000 |
| 582 | 389 ; returns... |
| 0 | 390 |
| 391 global ghostwriter_end_dive | |
| 392 ghostwriter_end_dive: | |
| 393 movff ext_flash_address+0,ext_flash_log_pointer+0 | |
| 394 movff ext_flash_address+1,ext_flash_log_pointer+1 | |
| 604 | 395 movff ext_flash_address+2,ext_flash_log_pointer+2 ; save end-of-profile pointer to store in header |
| 0 | 396 |
| 604 | 397 movff menupos3,customview_divemode ; store last custom view |
|
39
e4e91fe8b09d
remember last customview in dive and surface mode
mh@mh-THINK.fritz.box
parents:
35
diff
changeset
|
398 |
| 604 | 399 btfss realdive ; dive longer then one minute |
| 400 goto ghostwriter_end_dive_common ; NO - discard everything | |
| 0 | 401 |
| 402 ; In DEBUG compile, keep all simulated dives in logbook, Desat time, nofly, etc... | |
| 604 | 403 ifndef __DEBUG |
| 404 btfsc simulatormode_active ; are we in simulator mode? | |
| 405 goto ghostwriter_end_dive_common_sim ; YES - discard everything | |
| 406 endif | |
| 0 | 407 |
| 604 | 408 btfsc FLAG_apnoe_mode ; in Apnoe mode? |
| 409 goto ghostwriter_end_dive_common ; YES - discard everything | |
|
35
eca4a201d8cf
change apnea timeout, do no longer store apnea dives in logbook
heinrichsweikamp
parents:
23
diff
changeset
|
410 |
| 604 | 411 ; Dive finished (and longer than one minute) |
| 0 | 412 |
| 604 | 413 btfsc FLAG_apnoe_mode ; calc max. depth (again) for very short apnoe dives |
| 0 | 414 call apnoe_calc_maxdepth |
| 415 | |
| 416 ; calculate desaturation time | |
| 604 | 417 movff last_surfpressure_30min+0,int_I_pres_surface+0 ; pass surface to desat routine ! |
| 0 | 418 movff last_surfpressure_30min+1,int_I_pres_surface+1 |
| 419 | |
| 582 | 420 call deco_calc_dive_interval_1min ; calculate deco in surface mode |
| 421 call deco_calc_desaturation_time ; calculate desaturation time | |
| 422 banksel common ; select ram bank 1 | |
| 423 | |
| 604 | 424 movlw 0xFD ; .... End-of-Profile bytes |
| 425 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 0 | 426 movlw 0xFD |
| 604 | 427 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 0 | 428 movff ext_flash_address+0,ext_flash_log_pointer+0 |
| 429 movff ext_flash_address+1,ext_flash_log_pointer+1 | |
| 604 | 430 movff ext_flash_address+2,ext_flash_log_pointer+2 ; save end-of-profile pointer to store in header |
| 0 | 431 |
| 582 | 432 ; Set to first address again to store dive length ext_flash_dive_counter:3 |
| 604 | 433 rcall ghostwriter_load_pointer ; load ext_flash_address:3 from EEPROM .4-.6 |
| 0 | 434 |
| 604 | 435 incf_ext_flash_address_0x20 d'6' ; skip internal "0xFA 0xFA #Divenumber:2 0xFA 0xFA" Header |
| 582 | 436 ; Store dive length |
| 437 movf ext_flash_dive_counter+0,W | |
| 604 | 438 call write_byte_ext_flash_plus_nodel ; WREG -> profile in ext. flash (No ext_flash_dive_counter:3 increase) and does NOT delete 4kB page |
| 582 | 439 movf ext_flash_dive_counter+1,W |
| 604 | 440 call write_byte_ext_flash_plus_nodel ; WREG -> profile in ext. flash (No ext_flash_dive_counter:3 increase) and does NOT delete 4kB page |
| 582 | 441 movf ext_flash_dive_counter+2,W |
| 604 | 442 call write_byte_ext_flash_plus_nodel ; WREG -> profile in ext. flash (No ext_flash_dive_counter:3 increase) and does NOT delete 4kB page |
| 0 | 443 |
| 604 | 444 ; profile recording done |
| 0 | 445 |
| 446 ; Load total number of dives | |
| 447 read_int_eeprom .2 | |
| 448 movff EEDATA,lo | |
| 449 read_int_eeprom .3 | |
| 450 movff EEDATA,hi | |
| 582 | 451 ; +1 ; increase total dive counter |
| 452 infsnz lo,F | |
| 147 | 453 incf hi,F |
| 0 | 454 ; Store new number in EEPROM |
| 455 movff lo,EEDATA | |
| 582 | 456 write_int_eeprom .2 |
| 0 | 457 movff hi,EEDATA |
| 582 | 458 write_int_eeprom .3 |
| 0 | 459 |
| 582 | 460 decf lo,F ; -1 |
| 461 | |
| 0 | 462 ; Set ext_flash_address:3 to TOC entry of this dive |
| 463 ; 1st: 200000h-200FFFh -> lo=0 | |
| 464 ; 2nd: 201000h-201FFFh -> lo=1 | |
| 465 ; 3rd: 202000h-202FFFh -> lo=2 | |
| 466 ; 255: 2FF000h-2FFFFFh -> lo=255 | |
| 467 | |
| 468 clrf ext_flash_address+0 | |
| 469 clrf ext_flash_address+1 | |
| 470 movlw 0x20 | |
| 471 movwf ext_flash_address+2 | |
| 472 movlw .16 | |
| 582 | 473 mulwf lo ; lo*16 = offset to 0x2000 (up:hi) |
| 0 | 474 movf PRODL,W |
| 475 addwf ext_flash_address+1,F | |
| 476 movf PRODH,W | |
| 477 addwfc ext_flash_address+2,F | |
| 582 | 478 |
| 0 | 479 ; Now, write header |
| 480 | |
| 604 | 481 movlw 0xFA ; header start |
| 482 rcall ghostwrite_byte_header ; (this call will also delete the 4kB TOC entry first) | |
| 0 | 483 movlw 0xFA |
| 604 | 484 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 0 | 485 |
| 582 | 486 ; store pointer to begin of dive profile |
| 487 read_int_eeprom .4 | |
| 0 | 488 movf EEDATA,W |
| 604 | 489 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 582 | 490 read_int_eeprom .5 |
| 0 | 491 movf EEDATA,W |
| 604 | 492 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 582 | 493 read_int_eeprom .6 |
| 0 | 494 movf EEDATA,W |
| 604 | 495 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 0 | 496 |
| 582 | 497 ; store pointer to end of dive profile |
| 0 | 498 movf ext_flash_log_pointer+0,W |
| 604 | 499 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 0 | 500 movf ext_flash_log_pointer+1,W |
| 604 | 501 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 0 | 502 movf ext_flash_log_pointer+2,W |
| 604 | 503 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 0 | 504 |
| 505 ; write rest of header | |
| 604 | 506 movlw logbook_profile_version ; defined in hwos.inc |
| 507 rcall ghostwrite_byte_header ; WREG -> header in ext. flash | |
| 0 | 508 |
| 582 | 509 ; Store dive length |
| 510 movf ext_flash_dive_counter+0,W | |
| 604 | 511 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 582 | 512 movf ext_flash_dive_counter+1,W |
| 604 | 513 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 582 | 514 movf ext_flash_dive_counter+2,W |
| 604 | 515 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 0 | 516 |
| 604 | 517 lfsr FSR0,start_year ; load base address of start-of-dive data |
| 518 movf POSTINC0,W ; year | |
| 519 rcall ghostwrite_byte_header ; WREG -> header in ext. flash | |
| 520 movf POSTINC0,W ; month | |
| 521 rcall ghostwrite_byte_header ; WREG -> header in ext. flash | |
| 522 movf POSTINC0,W ; day | |
| 523 rcall ghostwrite_byte_header ; WREG -> header in ext. flash | |
| 524 movf POSTINC0,W ; hour | |
| 525 rcall ghostwrite_byte_header ; WREG -> header in ext. flash | |
| 526 movf POSTINC0,W ; minute | |
| 527 rcall ghostwrite_byte_header ; WREG -> header in ext. flash | |
| 0 | 528 |
| 604 | 529 btfss FLAG_apnoe_mode ; store apnoe max or normal max (which is only max from the last descent) |
| 530 bra end_dive1 ; store normal depth | |
| 0 | 531 |
| 532 movff apnoe_max_pressure+0,lo | |
| 533 movff apnoe_max_pressure+1,hi | |
| 582 | 534 call adjust_depth_with_salinity ; computes salinity setting into lo:hi [mbar] |
| 0 | 535 movff lo,apnoe_max_pressure+0 |
| 536 movff hi,apnoe_max_pressure+1 | |
| 604 | 537 |
| 538 movf lo,W ; max. depth, low byte | |
| 539 rcall ghostwrite_byte_header ; WREG -> header in ext. flash | |
| 540 movf hi,W ; max. depth, high byte | |
| 541 rcall ghostwrite_byte_header ; WREG -> header in ext. flash | |
| 582 | 542 bra end_dive2 ; skip normal max. depth |
| 543 | |
| 0 | 544 end_dive1: |
| 545 movff max_pressure+0,lo | |
| 546 movff max_pressure+1,hi | |
| 582 | 547 call adjust_depth_with_salinity ; computes salinity setting into lo:hi [mbar] |
| 0 | 548 movff lo,max_pressure+0 |
| 549 movff hi,max_pressure+1 | |
| 582 | 550 |
| 604 | 551 movf lo,W ; max. depth, low byte |
| 552 rcall ghostwrite_byte_header ; WREG -> header in ext. flash | |
| 553 movf hi,W ; max. depth, high byte | |
| 554 rcall ghostwrite_byte_header ; WREG -> header in ext. flash | |
| 0 | 555 |
| 556 end_dive2: | |
| 582 | 557 movf divemins+0,W ; dive time minutes |
| 604 | 558 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 0 | 559 movf divemins+1,W |
| 604 | 560 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 582 | 561 movf divesecs,W ; dive time seconds |
| 604 | 562 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 560 | 563 movff minimum_temperature+0,WREG ; minimum temperature |
| 604 | 564 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 582 | 565 movff minimum_temperature+1,WREG |
| 604 | 566 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 582 | 567 movff last_surfpressure_30min+0,WREG ; air pressure before dive |
| 604 | 568 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 582 | 569 movff last_surfpressure_30min+1,WREG |
| 604 | 570 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 560 | 571 movff int_O_desaturation_time+0,WREG ; desaturation time in minutes |
| 604 | 572 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 0 | 573 movff int_O_desaturation_time+1,WREG |
| 604 | 574 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 0 | 575 |
| 604 | 576 btfsc FLAG_ccr_mode ; in CCR mode? |
| 577 bra end_dive_dil_gaslist ; YES - write diluent gas list | |
| 578 btfsc FLAG_pscr_mode ; in pSCR mode? | |
| 579 bra end_dive_dil_gaslist ; YES - write diluent gas list | |
| 0 | 580 |
| 604 | 581 end_dive_oc_gaslist: ; write OC gases |
| 582 lfsr FSR0,opt_gas_O2_ratio-.1 ; set base address to (opt_gas_O2_ratio - 1) because of pre-increment statement | |
| 583 bra end_dive_gaslist ; write all 5 OC gases | |
| 0 | 584 |
| 604 | 585 end_dive_dil_gaslist: ; write diluents |
| 586 lfsr FSR0,opt_dil_O2_ratio-.1 ; set base address to (opt_dil_O2_ratio - 1) because of pre-increment statement | |
| 587 ;bra end_dive_gaslist ; write all 5 diluents | |
| 0 | 588 |
| 604 | 589 end_dive_gaslist: ; helper function for writing gas list entries |
| 590 ; | |
| 591 ; Memory Map: | |
| 592 ; ------------------------- | |
| 593 ; opt_gas_O2_ratio res 5 | |
| 594 ; opt_dil_O2_ratio res 5 | |
| 595 ; opt_gas_He_ratio res 5 | |
| 596 ; opt_dil_He_ratio res 5 | |
| 597 ; opt_gas_type res 5 | |
| 598 ; opt_dil_type res 5 | |
| 599 ; opt_gas_change res 5 | |
| 600 ; opt_dil_change res 5 | |
| 601 ; | |
| 602 movlw .5 ; 5 gases to store | |
| 603 movwf lo ; use lo as counter | |
| 604 end_dive_gaslist_loop: | |
| 605 movf PREINC0,W ; increment base address and get O2 ratio into WREG | |
| 606 rcall ghostwrite_byte_header ; store data | |
| 607 movlw .10 ; offset for H2 ratios | |
| 608 movf PLUSW0,W ; get H2 ratio into WREG | |
| 609 rcall ghostwrite_byte_header ; store data | |
| 610 movlw .30 ; offset for change depths | |
| 611 movf PLUSW0,W ; get change depth into WREG | |
| 612 rcall ghostwrite_byte_header ; store data | |
| 613 movlw .20 ; offset for types | |
| 614 movf PLUSW0,W ; get type into WREG | |
| 615 rcall ghostwrite_byte_header ; store data | |
| 616 decfsz lo ; decrement counter, did it became 0 ? | |
| 617 bra end_dive_gaslist_loop ; NO - loop | |
| 618 ;bra end_dive_oc_cc_common ; YES - done | |
| 0 | 619 |
| 620 end_dive_oc_cc_common: | |
| 604 | 621 movlw softwareversion_x ; firmware version |
| 0 | 622 rcall ghostwrite_byte_header |
| 623 movlw softwareversion_y | |
| 624 rcall ghostwrite_byte_header | |
| 604 | 625 movf batt_voltage+0,W ; battery voltage |
| 0 | 626 rcall ghostwrite_byte_header |
| 627 movf batt_voltage+1,W | |
| 628 rcall ghostwrite_byte_header | |
| 629 | |
| 582 | 630 movf samplingrate,W ; Sampling rate |
| 631 btfsc FLAG_apnoe_mode ; Apnoe mode? | |
| 632 movlw samplingrate_apnoe ; Apnoe sampling rate | |
| 604 | 633 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 0 | 634 |
| 582 | 635 ; CNS at beginning of dive |
| 0 | 636 movff CNS_start+0,WREG |
| 604 | 637 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 582 | 638 movff CNS_start+1,WREG |
| 604 | 639 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 582 | 640 ; Gradient factor |
| 641 movff GF_start,WREG | |
| 604 | 642 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 582 | 643 movff int_O_gradient_factor+0,WREG ; value limited to 255, only lower byte in use |
| 604 | 644 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 5 | 645 |
| 582 | 646 ; Logbook offset |
| 647 call do_logoffset_common_read ; Read into lo:hi | |
| 648 movf lo,W | |
| 604 | 649 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 582 | 650 movf hi,W |
| 604 | 651 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 5 | 652 |
| 582 | 653 ; Battery info at Byte 59 |
| 654 movf batt_percent,W ; 0-100 | |
| 604 | 655 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 656 | |
| 657 ; Store the setpoints | |
| 658 lfsr FSR0,char_I_setpoint_cbar ; base address of ppO2 values | |
| 659 lfsr FSR1,char_I_setpoint_change ; base address of change depths | |
| 660 movlw .5 ; 5 setpoints to store | |
| 661 movwf lo ; use lo as counter | |
| 662 end_dive_sp_loop: | |
| 663 movf POSTINC0,W ; get ppO2 value | |
| 664 rcall ghostwrite_byte_header ; store ppO2 value | |
| 665 movf POSTINC1,W ; get change depth | |
| 666 rcall ghostwrite_byte_header ; store change depth | |
| 667 decfsz lo ; decrement counter, did it became 0 ? | |
| 668 bra end_dive_sp_loop ; NO - loop | |
| 0 | 669 |
| 604 | 670 ; Store further data |
| 671 movff opt_salinity,WREG ; salinity (0-4%) | |
| 672 rcall ghostwrite_byte_header ; store salinity | |
| 0 | 673 |
| 604 | 674 movff int_O_CNS_fraction+0,WREG ; CNS value, low byte |
| 675 rcall ghostwrite_byte_header ; store CNS% | |
| 676 movff int_O_CNS_fraction+1,WREG ; CNS value, high byte | |
| 677 bcf WREG,int_warning_flag ; clear warning flag | |
| 678 bcf WREG,int_attention_flag ; clear attention flag | |
| 679 rcall ghostwrite_byte_header ; store CNS% | |
| 0 | 680 |
| 604 | 681 movff avg_rel_pressure_total+0,WREG ; average depth |
| 682 rcall ghostwrite_byte_header ; WREG -> header in ext. flash | |
| 683 movff avg_rel_pressure_total+1,WREG ; average depth | |
| 684 rcall ghostwrite_byte_header ; WREG -> header in ext. flash | |
| 685 | |
| 686 movff total_divetime_seconds+0,WREG ; total dive time (regardless of start_dive_threshold) | |
| 687 rcall ghostwrite_byte_header ; WREG -> header in ext. flash | |
| 688 movff total_divetime_seconds+1,WREG ; total dive time (regardless of start_dive_threshold) | |
| 689 rcall ghostwrite_byte_header ; WREG -> header in ext. flash | |
| 0 | 690 |
| 691 movff char_I_GF_Low_percentage,WREG ; GF_lo | |
| 692 movff char_I_deco_model,lo | |
| 693 decfsz lo,F ; jump over next line if char_I_deco_model == 1 | |
| 604 | 694 movff char_I_saturation_multiplier,WREG ; saturation multiplier |
| 695 rcall ghostwrite_byte_header ; WREG -> header in ext. flash | |
| 0 | 696 |
| 697 movff char_I_GF_High_percentage,WREG ; GF_hi | |
| 698 movff char_I_deco_model,lo | |
| 699 decfsz lo,F ; jump over next line if char_I_deco_model == 1 | |
| 604 | 700 movff char_I_desaturation_multiplier,WREG ; desaturation multiplier |
| 701 rcall ghostwrite_byte_header ; WREG -> header in ext. flash | |
| 0 | 702 |
| 703 movff char_I_deco_model,WREG ; 0 = ZH-L16, 1 = ZH-L16-GF | |
| 582 | 704 rcall ghostwrite_byte_header ; writes byte and increases address (no banking) |
| 0 | 705 |
| 582 | 706 read_int_eeprom .2 |
| 0 | 707 movf EEDATA,W |
| 604 | 708 rcall ghostwrite_byte_header ; total dive counter, low |
| 582 | 709 read_int_eeprom .3 |
| 0 | 710 movf EEDATA,W |
| 604 | 711 rcall ghostwrite_byte_header ; total dive counter, high |
| 0 | 712 |
| 582 | 713 movff opt_dive_mode,WREG |
| 714 rcall ghostwrite_byte_header ; 0=OC, 1=CC, 2=Gauge, 3=Apnea, 4=PSCR | |
| 0 | 715 |
| 582 | 716 ; Store all tissue data available |
| 717 movlw .16 | |
| 718 movwf lo | |
| 719 lfsr FSR1,char_O_tissue_N2_saturation+0 | |
| 0 | 720 end_dive_store_tissues_N2: |
| 582 | 721 movf POSTINC1,W |
| 722 bcf WREG,7 ; clear flag bit for ongassing/offgassing | |
| 604 | 723 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 582 | 724 decfsz lo,F |
| 604 | 725 bra end_dive_store_tissues_N2 ; NO |
| 0 | 726 |
| 582 | 727 movlw .64 |
| 728 movwf lo | |
| 604 | 729 lfsr FSR1,0x700 ; pres_tissue_N2+0 ; 16*4 Byte Float = 64 Bytes |
| 0 | 730 end_dive_store_tissues_N2_2: |
| 582 | 731 movf POSTINC1,W |
| 604 | 732 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 582 | 733 decfsz lo,F |
| 604 | 734 bra end_dive_store_tissues_N2_2 ; NO |
| 0 | 735 |
| 582 | 736 movlw .16 |
| 737 movwf lo | |
| 738 lfsr FSR1,char_O_tissue_He_saturation+0 | |
| 0 | 739 end_dive_store_tissues_He: |
| 582 | 740 movf POSTINC1,W |
| 741 bcf WREG,7 ; clear flag bit for ongassing/offgassing | |
| 604 | 742 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 582 | 743 decfsz lo,F |
| 604 | 744 bra end_dive_store_tissues_He ; NO |
| 0 | 745 |
| 582 | 746 movlw .64 |
| 747 movwf lo | |
| 604 | 748 lfsr FSR1,0x740 ; pres_tissue_He+0 ; 16*4 Byte Float = 64 Bytes |
| 0 | 749 end_dive_store_tissues_He_2: |
| 582 | 750 movf POSTINC1,W |
| 604 | 751 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 582 | 752 decfsz lo,F |
| 604 | 753 bra end_dive_store_tissues_He_2 ; NO |
| 0 | 754 |
| 582 | 755 ; Some deco stuff |
| 756 movff char_I_depth_last_deco,WREG ; last stop [m] | |
| 604 | 757 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 582 | 758 movff char_I_deco_distance,WREG ; assumed distance to shown stop |
| 604 | 759 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 0 | 760 |
| 582 | 761 ; Last HUD data |
| 604 | 762 movff hud_battery_mv+0,WREG ; last HUD battery value |
| 763 rcall ghostwrite_byte_header ; WREG -> header in ext. flash | |
| 764 movff hud_battery_mv+1,WREG ; last HUD battery value | |
| 765 rcall ghostwrite_byte_header ; WREG -> header in ext. flash | |
| 766 movff hud_status_byte,WREG ; last HUD status | |
| 767 rcall ghostwrite_byte_header ; WREG -> header in ext. flash | |
| 0 | 768 |
| 582 | 769 ; Battery gauge registers [nAs] |
| 604 | 770 lfsr FSR0,battery_gauge ; load base address of battery gauge register |
| 771 movf POSTINC0,W ; get byte 0 | |
| 772 rcall ghostwrite_byte_header ; WREG -> header in ext. flash | |
| 773 movf POSTINC0,W ; get byte 1 | |
| 774 rcall ghostwrite_byte_header ; WREG -> header in ext. flash | |
| 775 movf POSTINC0,W ; get byte 2 | |
| 776 rcall ghostwrite_byte_header ; WREG -> header in ext. flash | |
| 777 movf POSTINC0,W ; get byte 3 | |
| 778 rcall ghostwrite_byte_header ; WREG -> header in ext. flash | |
| 779 movf POSTINC0,W ; get byte 4 | |
| 780 rcall ghostwrite_byte_header ; WREG -> header in ext. flash | |
| 781 movf POSTINC0,W ; get byte 5 | |
| 782 rcall ghostwrite_byte_header ; WREG -> header in ext. flash | |
| 0 | 783 |
| 582 | 784 ; Header stop |
| 0 | 785 movlw 0xFB |
| 604 | 786 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 0 | 787 movlw 0xFB |
| 604 | 788 rcall ghostwrite_byte_header ; WREG -> header in ext. flash |
| 582 | 789 |
| 604 | 790 call divemode_store_statistics ; store/update statistics for this unit |
| 0 | 791 |
| 792 clrf surface_interval+0 | |
| 604 | 793 clrf surface_interval+1 ; clear surface interval timer |
| 0 | 794 |
| 795 ghostwriter_end_dive_common: | |
| 796 ; Update ext_flash_log_pointer into EEPROM | |
| 797 clrf EEADRH | |
| 798 movff ext_flash_log_pointer+0,EEDATA | |
| 799 write_int_eeprom .4 | |
| 800 movff ext_flash_log_pointer+1,EEDATA | |
| 801 write_int_eeprom .5 | |
| 802 movff ext_flash_log_pointer+2,EEDATA | |
| 803 write_int_eeprom .6 | |
| 804 | |
| 582 | 805 bcf simulatormode_active ; if we were in simulator mode |
| 0 | 806 |
| 807 ; In DEBUG compile, keep all simulated dives in logbook, Desat time, nofly, etc... | |
| 604 | 808 ifndef __DEBUG |
| 809 btfsc restore_deco_data ; restore decodata? | |
| 810 call deco_pull_tissues_from_vault | |
| 811 banksel common ; bank 1 | |
| 812 endif | |
| 560 | 813 call update_battery_registers ; update battery registers into EEPROM |
| 582 | 814 goto surfloop ; and return to surface loop |
| 0 | 815 |
| 604 | 816 |
|
166
30ebaf72170d
BUGFIX: Flip compass with flipped screen, too
heinrichsweikamp
parents:
147
diff
changeset
|
817 ghostwriter_end_dive_common_sim: |
| 604 | 818 tstfsz surface_interval+0 ; was interval zero? |
| 819 bra ghostwriter_end_dive_common_sim2 ; NO | |
| 820 tstfsz surface_interval+1 ; was interval zero? | |
| 821 bra ghostwriter_end_dive_common_sim2 ; NO | |
| 822 bra ghostwriter_end_dive_common ; YES - done | |
|
174
932e91074bdb
CHANGE: Clarify Travel Gases with "---" as change depth
heinrichsweikamp
parents:
170
diff
changeset
|
823 ghostwriter_end_dive_common_sim2: |
| 582 | 824 movf divemins+0,W |
| 825 addwf surface_interval+0,F | |
| 826 movf divemins+1,W | |
| 604 | 827 addwfc surface_interval+1 ; add simulated dive time to surface interval |
| 582 | 828 bra ghostwriter_end_dive_common |
|
166
30ebaf72170d
BUGFIX: Flip compass with flipped screen, too
heinrichsweikamp
parents:
147
diff
changeset
|
829 |
| 604 | 830 |
| 831 ghostwriter_load_pointer: ; load ext_flash_address:3 from EEPROM .4-.6 | |
| 832 clrf EEADRH ; make sure to select EEPROM bank 0 | |
| 0 | 833 read_int_eeprom .4 |
| 834 movff EEDATA,ext_flash_address+0 | |
| 835 read_int_eeprom .5 | |
| 836 movff EEDATA,ext_flash_address+1 | |
| 837 read_int_eeprom .6 | |
| 838 movff EEDATA,ext_flash_address+2 | |
| 582 | 839 return |
|
219
4b2622e0fd50
init new 4kB Page in logbook memory when pointer is not valid.
heinrichsweikamp
parents:
185
diff
changeset
|
840 |
| 604 | 841 ghostwriter_short_header_init: ; proceed one page forward |
| 582 | 842 clrf EEDATA |
| 604 | 843 write_int_eeprom .4 ; ext_flash_address+0 = 0 |
| 582 | 844 movlw .16 |
| 845 addwf ext_flash_address+1,F | |
| 846 movlw .0 | |
| 847 addwfc ext_flash_address+2,F | |
| 848 movlw 0x20 | |
| 604 | 849 cpfseq ext_flash_address+2 ; at address 0x200000? |
| 850 bra ghostwriter_short_header_init2 ; NO | |
| 851 clrf ext_flash_address+2 ; YES - rollover to 0x000000 | |
|
219
4b2622e0fd50
init new 4kB Page in logbook memory when pointer is not valid.
heinrichsweikamp
parents:
185
diff
changeset
|
852 ghostwriter_short_header_init2: |
| 582 | 853 movlw 0xF0 |
| 604 | 854 andwf ext_flash_address+1,F ; keep higher nibble, set lower nibble to 0 |
|
219
4b2622e0fd50
init new 4kB Page in logbook memory when pointer is not valid.
heinrichsweikamp
parents:
185
diff
changeset
|
855 |
| 582 | 856 movff ext_flash_address+1,EEDATA |
| 604 | 857 write_int_eeprom .5 ; write new pointer |
| 582 | 858 movff ext_flash_address+2,EEDATA |
| 604 | 859 write_int_eeprom .6 ; write new pointer |
| 860 bra ghostwriter_short_header2 ; Done | |
|
219
4b2622e0fd50
init new 4kB Page in logbook memory when pointer is not valid.
heinrichsweikamp
parents:
185
diff
changeset
|
861 |
|
4b2622e0fd50
init new 4kB Page in logbook memory when pointer is not valid.
heinrichsweikamp
parents:
185
diff
changeset
|
862 global ghostwriter_short_header |
| 604 | 863 ghostwriter_short_header: ; write short header with dive number into profile memory |
|
219
4b2622e0fd50
init new 4kB Page in logbook memory when pointer is not valid.
heinrichsweikamp
parents:
185
diff
changeset
|
864 ; load pointer for profile storing into RAM (Updated in EEPROM after the dive) |
| 604 | 865 rcall ghostwriter_load_pointer ; load ext_flash_address:3 from EEPROM .4-.6 |
|
219
4b2622e0fd50
init new 4kB Page in logbook memory when pointer is not valid.
heinrichsweikamp
parents:
185
diff
changeset
|
866 |
| 582 | 867 ; The following code is used to write a clean new dive after the previous hasn't been |
| 868 ; stored correctly. e.g. after a battery fail during the dive | |
| 604 | 869 call ext_flash_byte_read_plus_0x20 ; into ext_flash_rw |
| 582 | 870 incfsz ext_flash_rw,F |
| 604 | 871 bra ghostwriter_short_header_init ; not 0xFF -> init page |
| 872 call ext_flash_byte_read_plus_0x20 ; into ext_flash_rw | |
| 582 | 873 incfsz ext_flash_rw,F |
| 604 | 874 bra ghostwriter_short_header_init ; not 0xFF -> init page |
|
219
4b2622e0fd50
init new 4kB Page in logbook memory when pointer is not valid.
heinrichsweikamp
parents:
185
diff
changeset
|
875 |
|
4b2622e0fd50
init new 4kB Page in logbook memory when pointer is not valid.
heinrichsweikamp
parents:
185
diff
changeset
|
876 ghostwriter_short_header2: |
| 582 | 877 ; All ok, reload the pointer and start |
| 604 | 878 rcall ghostwriter_load_pointer ; load ext_flash_address:3 from EEPROM .4-.6 |
| 0 | 879 |
| 582 | 880 ; Clear dive length counter |
| 881 clrf ext_flash_dive_counter+0 | |
| 882 clrf ext_flash_dive_counter+1 | |
| 883 clrf ext_flash_dive_counter+2 | |
| 0 | 884 |
| 582 | 885 ; Write short header with dive number into profile memory |
| 0 | 886 movlw 0xFA |
| 604 | 887 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 0 | 888 movlw 0xFA |
| 604 | 889 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 0 | 890 ; Load total number of dives (low byte only) |
| 891 read_int_eeprom .2 | |
| 604 | 892 incf EEDATA,W ; +1 |
| 893 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 0 | 894 read_int_eeprom .3 |
| 895 movf EEDATA,W | |
| 604 | 896 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 0 | 897 movlw 0xFA |
| 604 | 898 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 0 | 899 movlw 0xFA |
| 604 | 900 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
|
278
dfac47ac2e1d
BUGFIX: There was a 1:4096 chance that a portion of a dive was not stored correctly resulting in download issues
heinrichsweikamp
parents:
275
diff
changeset
|
901 |
| 582 | 902 ; Keep room for dive length ext_flash_dive_counter:3 (Stored at the end of the dive) |
| 903 ; Writing 0xFF three times here is mandatory | |
| 904 ; - 0xFF can be overwritten after the dive | |
| 905 ; - ghostwrite_byte_profile takes care of 4kB Page switching | |
| 906 ; - fixes an issue when we are at exactly 0xXXX000 here... | |
|
278
dfac47ac2e1d
BUGFIX: There was a 1:4096 chance that a portion of a dive was not stored correctly resulting in download issues
heinrichsweikamp
parents:
275
diff
changeset
|
907 |
| 582 | 908 movlw 0xFF |
| 604 | 909 call write_byte_ext_flash_plus_nocnt ; WREG -> profile in ext. flash (No ext_flash_dive_counter:3 increase) |
| 582 | 910 movlw 0xFF |
| 604 | 911 call write_byte_ext_flash_plus_nocnt ; WREG -> profile in ext. flash (No ext_flash_dive_counter:3 increase) |
| 582 | 912 movlw 0xFF |
| 604 | 913 call write_byte_ext_flash_plus_nocnt ; WREG -> profile in ext. flash (No ext_flash_dive_counter:3 increase) |
| 0 | 914 |
| 604 | 915 movf samplingrate,W ; sampling rate |
| 916 btfsc FLAG_apnoe_mode ; apnoe mode? | |
| 917 movlw samplingrate_apnoe ; apnoe sampling rate | |
| 918 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 0 | 919 |
| 604 | 920 movlw .7 ; number of divisors |
| 921 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 0 | 922 |
| 604 | 923 movlw .0 ; type |
| 924 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 0 | 925 movlw infolength_temperature |
| 604 | 926 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 927 movlw div_temperature ; divisor temperature | |
| 928 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 0 | 929 |
| 582 | 930 movlw .1 ; Type |
| 604 | 931 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 0 | 932 movlw infolength_deco |
| 604 | 933 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 934 movlw div_deco ; divisor deco data | |
| 935 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 0 | 936 |
| 604 | 937 movlw .2 ; type |
| 938 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 0 | 939 movlw infolength_gf |
| 604 | 940 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 941 movlw div_gf ; divisor gf | |
| 942 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 0 | 943 |
| 604 | 944 movlw .3 ; type |
| 945 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 0 | 946 movlw infolength_ppo2_sensors |
| 604 | 947 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 948 movlw div_ppo2_sensors ; divisor ppO2 | |
| 582 | 949 btfss FLAG_ccr_mode ; =1: CCR mode (Fixed ppO2 or Sensor) active |
| 604 | 950 movlw .0 ; no ppO2 data in OC mode |
| 951 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 0 | 952 |
| 604 | 953 movlw .4 ; type |
| 954 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 0 | 955 movlw infolength_decoplan |
| 604 | 956 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 957 movlw div_decoplan ; divisor debug | |
| 958 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 0 | 959 |
| 582 | 960 movlw .5 ; Type |
| 604 | 961 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 0 | 962 movlw infolength_cns |
| 604 | 963 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 964 movlw div_cns ; divisor CNS | |
| 965 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 0 | 966 |
| 582 | 967 movlw .6 ; Type |
| 604 | 968 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 0 | 969 movlw infolength_tank |
| 604 | 970 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash |
| 971 movlw div_tank ; divisor tank | |
| 972 rcall ghostwrite_byte_profile ; WREG -> profile in ext. flash | |
| 0 | 973 |
| 974 return | |
| 582 | 975 |
| 604 | 976 divemode_store_statistics: ; store/update statistics for this unit |
| 582 | 977 call vault_decodata_into_eeprom ; update deco data |
| 604 | 978 call do_logoffset_common_read ; existing logbook offset into lo:hi |
| 582 | 979 |
| 980 tstfsz lo ; lo=0? | |
| 604 | 981 bra change_logbook_offset1 ; NO - adjust offset |
| 582 | 982 tstfsz hi ; hi=0? |
| 604 | 983 bra change_logbook_offset1 ; NO - adjust offset |
| 984 bra change_logbook_offset2 ; lo=0 and hi=0 -> skip offset routine | |
| 582 | 985 |
| 0 | 986 change_logbook_offset1: |
| 987 movlw d'1' | |
| 988 addwf lo | |
| 989 movlw d'0' | |
| 990 addwfc hi | |
| 582 | 991 call do_logoffset_common_write ; lo:hi -> EEPROM |
| 992 | |
| 0 | 993 change_logbook_offset2: |
|
453
b4f28ab23b87
NEW: Show Uptime (Time since last firmware boot) in information menu
heinrichsweikamp
parents:
437
diff
changeset
|
994 ; Clear lastdive:4 |
|
b4f28ab23b87
NEW: Show Uptime (Time since last firmware boot) in information menu
heinrichsweikamp
parents:
437
diff
changeset
|
995 banksel lastdive_time+0 |
|
b4f28ab23b87
NEW: Show Uptime (Time since last firmware boot) in information menu
heinrichsweikamp
parents:
437
diff
changeset
|
996 clrf lastdive_time+0 |
|
b4f28ab23b87
NEW: Show Uptime (Time since last firmware boot) in information menu
heinrichsweikamp
parents:
437
diff
changeset
|
997 clrf lastdive_time+1 |
|
b4f28ab23b87
NEW: Show Uptime (Time since last firmware boot) in information menu
heinrichsweikamp
parents:
437
diff
changeset
|
998 clrf lastdive_time+2 |
|
b4f28ab23b87
NEW: Show Uptime (Time since last firmware boot) in information menu
heinrichsweikamp
parents:
437
diff
changeset
|
999 clrf lastdive_time+3 |
|
503
4542d03f748a
NEW: Last Dive customviews in surface mode with divetime, depth and interval
heinrichsweikamp
parents:
490
diff
changeset
|
1000 movff divemins+0,lastdive_duration+0 |
|
4542d03f748a
NEW: Last Dive customviews in surface mode with divetime, depth and interval
heinrichsweikamp
parents:
490
diff
changeset
|
1001 movff divemins+1,lastdive_duration+1 |
| 582 | 1002 movff divesecs, lastdive_duration+2 |
|
503
4542d03f748a
NEW: Last Dive customviews in surface mode with divetime, depth and interval
heinrichsweikamp
parents:
490
diff
changeset
|
1003 movff max_pressure+0,lastdive_maxdepth+0 |
|
4542d03f748a
NEW: Last Dive customviews in surface mode with divetime, depth and interval
heinrichsweikamp
parents:
490
diff
changeset
|
1004 movff max_pressure+1,lastdive_maxdepth+1 |
|
453
b4f28ab23b87
NEW: Show Uptime (Time since last firmware boot) in information menu
heinrichsweikamp
parents:
437
diff
changeset
|
1005 banksel common |
|
b4f28ab23b87
NEW: Show Uptime (Time since last firmware boot) in information menu
heinrichsweikamp
parents:
437
diff
changeset
|
1006 |
| 0 | 1007 ; Add more here... |
| 1008 return | |
| 1009 | |
| 582 | 1010 END |