Mercurial > public > hwos_code
annotate src/hwos.inc @ 646:5b7fe7777425
3.16 release
| author | heinrichs weikamp |
|---|---|
| date | Thu, 14 Oct 2021 12:03:24 +0200 |
| parents | 8c1f1f334275 |
| children | 357341239438 |
| rev | line source |
|---|---|
| 0 | 1 ;============================================================================= |
| 2 ; | |
| 640 | 3 ; File hwos.inc * combined next generation V3.12.3 |
| 0 | 4 ; |
| 623 | 5 ; OSTC Platform Definitions |
| 0 | 6 ; |
| 7 ; Copyright (c) 2011, JD Gascuel, HeinrichsWeikamp, all right reserved. | |
| 8 ;============================================================================= | |
| 9 ; HISTORY | |
| 604 | 10 ; 2011-05-24 : [jDG] Cleanups from initial Matthias code |
| 0 | 11 ;============================================================================= |
| 12 | |
| 623 | 13 |
| 634 | 14 ; ---- Hardware Configuration |
| 646 | 15 LIST P=18F87K22 ; compiler settings, if changed change also: Configure -> SelectDevice in MPLAB |
| 623 | 16 #include "p18f87k22.inc" ; processor definitions |
| 17 #include "ports.inc" ; port map definitions | |
| 0 | 18 |
| 604 | 19 |
| 634 | 20 ; ---- Software Configuration |
| 623 | 21 #include "configuration.inc" ; OSTC hwOS configuration |
| 582 | 22 |
| 0 | 23 |
| 634 | 24 ;----------------------------------------------------------------------------- |
| 25 ; Settings, Limits, Thresholds, Encodings, etc. | |
| 26 ;----------------------------------------------------------------------------- | |
| 27 | |
| 28 ; ---- Language Codes | |
| 604 | 29 #DEFINE none 0 ; no language selected |
| 623 | 30 #DEFINE en 1 ; select English |
| 31 #DEFINE de 2 ; select German | |
| 32 #DEFINE fr 3 ; select French | |
| 33 #DEFINE it 4 ; select Italian | |
| 604 | 34 |
| 560 | 35 |
| 634 | 36 ; ---- Magic Cookie Definition |
| 631 | 37 #DEFINE comm_service_key 0xABCDEF ; simsalabim to establish comm service mode |
| 0 | 38 |
| 39 | |
| 634 | 40 ; ---- Scrolling Menu Support |
| 41 ;#DEFINE scrolling_menu_enabled ; disabled | |
| 42 | |
| 43 | |
| 44 ; ---- Logo Address Vectors | |
| 604 | 45 #DEFINE hw_logo_block 0x01E000 ; color image data for heinrichsweikamp logo |
| 634 | 46 #DEFINE comm_logo_1 0x01EEDE ; color image data for USB or BT logo |
| 47 #DEFINE comm_logo_2 0x01EA04 ; color image data for BT logo, "+" bootloader | |
| 604 | 48 |
| 49 | |
| 582 | 50 ;-----------------------------EEPROM DATA ------------------------------------ |
| 51 ; Automatic reset of all options when this is changed: | |
| 631 | 52 #DEFINE eeprom_opt_version .8 ; range: 16 bit |
| 53 #DEFINE eeprom_vault_version .1 ; range: 8 bit | |
| 0 | 54 ;----------------------------------------------------------------------------- |
| 55 | |
| 623 | 56 |
| 634 | 57 ; ---- PWM1 for LED dimming |
| 58 #DEFINE CCP1CON_VALUE b'00001100' | |
| 623 | 59 #DEFINE T2CON_ECO b'01111110' |
| 60 #DEFINE T2CON_NORMAL b'01111110' | |
| 61 #DEFINE T2CON_FASTEST b'01111110' | |
| 62 | |
| 63 | |
| 634 | 64 ; ---- CPU speeds |
| 623 | 65 #DEFINE coding_speed_eco .1 ; 1 MHz = eco speed |
| 66 #DEFINE coding_speed_normal .2 ; 16 MHz = normal speed | |
| 67 #DEFINE coding_speed_fastest .4 ; 64 MHz = fastest speed (32 MHz on OSTC Sport BLE) | |
| 68 | |
| 69 #DEFINE speed_is_eco cpu_speed_state,0 ; =1: CPU is running at eco speed | |
| 70 #DEFINE speed_is_normal cpu_speed_state,1 ; =1: CPU is running at normal speed | |
| 71 #DEFINE speed_is_fastest cpu_speed_state,2 ; =1: CPU is running at fastest speed | |
| 72 | |
| 646 | 73 ; ---- I2C speed |
| 74 #DEFINE i2c_speed_value 0x27 ;0x9C = 100kHz @ 64MHz Fosc, 0x27 = 100kHz @ 16MHz Fosc | |
| 604 | 75 |
| 634 | 76 ; ---- Divemode Custom View Indexes - Attention: these numbers need to be in line with the jump tables in customview.asm! |
| 631 | 77 #DEFINE index_blank .0 ; blank view |
| 604 | 78 #DEFINE index_avr_stopwatch .1 ; average depth and stopwatch |
| 79 #DEFINE index_compass_dm .2 ; compass | |
| 80 #DEFINE index_ppo2_sensors .3 ; ppO2 sensors | |
| 81 #DEFINE index_sensor_check .4 ; sensor check | |
| 82 #DEFINE index_pscr_info .5 ; pSCR data | |
| 83 #DEFINE index_pressures_SAC .6 ; tank pressure and SAC rate | |
| 84 #DEFINE index_gas_needs_ascent .7 ; gas needs for ascent / cave return | |
| 631 | 85 #DEFINE index_cave_tts .8 ; cave mode TTS |
| 86 #DEFINE index_decoplan .9 ; deco plan | |
| 87 #DEFINE index_ceiling_GF_tissue .10 ; ceiling, current GF and tissues | |
| 88 #DEFINE index_CNS .11 ; CNS values | |
| 89 #DEFINE index_ppo2_ead_end_cns .12 ; ppO2, END/EAD and CNS or gas density | |
| 604 | 90 #DEFINE index_clock_batt_surfpress .13 ; clock, battery and surface pressure |
| 631 | 91 #DEFINE index_gf_factors .14 ; GF factors |
| 92 #DEFINE index_cave_waypoints .15 ; cave waypoints | |
| 93 #DEFINE index_cv_dm_max .13 ; highest index used in normal custom view rotation | |
| 28 | 94 |
| 623 | 95 |
| 634 | 96 ; ---- Timing for button hold-down flags |
| 631 | 97 #DEFINE TMR1H_VALUE_FIRST .255-.128 ; in steps of 7.8125 ms -> 1.00 s |
| 604 | 98 #DEFINE TMR1H_VALUE_CONT .255-.32 ; in steps of 7.8125 ms -> 0.25 s |
| 631 | 99 #DEFINE TMR1H_VALUE_CONT_DIVE .255-.64 ; in steps of 7.8125 ms -> 0.50 s |
| 0 | 100 |
| 623 | 101 |
| 634 | 102 ; ---- Font Sizes |
| 623 | 103 #DEFINE FT_TINY .0 ; aa_font16_block, full character set |
| 104 #DEFINE FT_SMALL .1 ; aa_font28_block, full character set | |
| 105 #DEFINE FT_STANDARD .2 ; aa_font34_block, full character set | |
| 106 #DEFINE FT_MEDIUM .3 ; aa_font48_block, only digits, /, ., :, ;, <, =, > and ? | |
| 107 #DEFINE FT_LARGE .4 ; aa_font90_block, only digits, / and . | |
| 108 #DEFINE FT_HUGE .5 ; aa_font92_block, only digits, / and . | |
| 109 | |
| 0 | 110 |
| 634 | 111 ; ---- External O2 Sensors |
| 628 | 112 #DEFINE min_mv .70 ; = 7 mV |
| 604 | 113 #DEFINE max_mv .2500 ; = 250 mV |
| 634 | 114 #DEFINE ignore_mv_above .3500 ; = 350 mV (to suppress ghost readings on long open cables) |
| 115 #DEFINE ignore_mv_below .19 ; = 1.9 mv (to suppress noise readings on open cabled) | |
| 0 | 116 |
| 623 | 117 |
| 634 | 118 ; ---- Profile Recording Parameters |
| 119 #DEFINE logbook_profile_version 0x40+0x24 ; logbook recording format: internal (2 bit) + external (6 bit) | |
| 582 | 120 #DEFINE samplingrate_apnoe .1 ; [seconds] |
| 560 | 121 |
| 623 | 122 |
| 634 | 123 ; ---- Profile Recording Rates - Attention: all Divisors must be < 16 ! |
| 604 | 124 #DEFINE div_temperature .6 ; x sampling rate [s] |
| 125 #DEFINE div_deco .6 ; x sampling rate [s] | |
| 126 #DEFINE div_gf .12 ; x sampling rate [s] | |
| 127 #DEFINE div_ppo2_sensors .2 ; x sampling rate [s] | |
| 128 #DEFINE div_decoplan .12 ; x sampling rate [s] | |
| 129 #DEFINE div_cns .12 ; x sampling rate [s] | |
| 628 | 130 #DEFINE div_tank .12 ; x sampling rate [s] |
| 560 | 131 |
| 623 | 132 |
| 634 | 133 ; ---- Profile Recording Data - Attention: Information Lengths must be < 16 ! |
| 582 | 134 #DEFINE infolength_temperature .2 ; [byte] |
| 135 #DEFINE infolength_deco .2 ; [byte] | |
| 136 #DEFINE infolength_gf .1 ; [byte] | |
| 137 #DEFINE infolength_ppo2_sensors .9 ; [byte] | |
| 138 #DEFINE infolength_decoplan .15 ; [byte] | |
| 139 #DEFINE infolength_cns .2 ; [byte] | |
| 628 | 140 #DEFINE infolength_tank .2 ; [byte] |
| 0 | 141 |
| 623 | 142 |
| 634 | 143 ; ---- RX Functions |
| 628 | 144 #DEFINE rx_packet_overdue_timeout .120 ; [seconds] timeout for pressure measurements becomming declared as outdated (max. 255) |
| 604 | 145 #DEFINE max_pres_diff_min .5 ; [bar] minimum selectable pressure difference for ind.double mode |
| 146 #DEFINE max_pres_diff_max .50 ; [bar] maximum selectable pressure difference for ind.double mode | |
| 0 | 147 |
| 623 | 148 IFDEF _ccr_pscr |
| 149 #DEFINE tr_pres_options .15 ; number of options for pressure measurement source / with diluents | |
| 150 ELSE | |
| 151 #DEFINE tr_pres_options .6 ; number of options for pressure measurement source / OC gases only | |
| 152 ENDIF | |
| 153 | |
| 631 | 154 |
| 634 | 155 ; ---- Cave Mode |
| 623 | 156 IFDEF _cave_mode |
| 631 | 157 #DEFINE backtrack_waypoint_max .30 ; highest user-available waypoint number (max allowed: 30) |
| 158 #DEFINE backtrack_almost_full_threshold .240 ; backtrack index position at which the almost full flag will be set | |
| 159 #DEFINE backtrack_entire_full_threshold .250 ; backtrack index position at which the entirely full flag will be set | |
| 623 | 160 ENDIF |
| 161 | |
| 162 | |
| 634 | 163 ; ---- Gas Needs Settings |
| 604 | 164 #DEFINE min_tank_size .1 ; [liter] |
| 165 #DEFINE max_tank_size .40 ; [liter] | |
| 166 #DEFINE min_fill_press .5 ; [0 bar] value is in multiples of 10 bar | |
| 167 #DEFINE max_fill_press .29 ; [0 bar] value is in multiples of 10 bar, no 300 bar due to too far beyond ideal gas laws | |
| 168 | |
| 169 | |
| 634 | 170 ; ---- Timeouts for Menus / Surface Mode |
| 631 | 171 #DEFINE surfmode_timeout_default .240 ; [s] default timeout for surface mode and surface menus |
| 172 #DEFINE surfmode_timeout_aa_15v .90 ; [s] timeout for surface mode and surface menus when on 1.5V battery | |
| 173 #DEFINE surfmode_timeout_simulator .240 ; [s] special timeout for simulator mode | |
| 634 | 174 |
| 604 | 175 |
| 634 | 176 ; ---- Timeouts for Menus / Dive Mode |
| 623 | 177 #DEFINE divemode_timeout_premenu .10 ; [s] timeout for dive mode pre-menu |
| 178 #DEFINE divemode_timeout_mainmenu .30 ; [s] timeout for dive mode main menu | |
| 179 | |
| 180 | |
| 634 | 181 ; ---- RS232 Timeout |
| 182 #DEFINE rx_timeout .400 ; [ms] timeout for RS232 RX, needs to be multiple of 50 ms | |
| 631 | 183 |
| 184 | |
| 634 | 185 ; ---- End-of-Dive Timeouts |
| 631 | 186 #DEFINE simulator_timeout_normal .90 ; [min] timeout simulator mode |
| 640 | 187 #DEFINE simulator_timeout_cave .240 ; [min] timeout simulator mode (cave mode) |
| 188 #DEFINE apnoe_timeout .15 ; [min] timeout at surface in apnoe mode | |
| 189 #DEFINE simulator_timeout .15 ; [s] timeout at surface in simulator mode | |
| 190 #DEFINE divetime_less_1min_timeout .5 ; [s] timeout at surface for very short dives | |
| 631 | 191 |
| 192 | |
| 634 | 193 ; ---- other Timeouts |
| 631 | 194 #DEFINE deep_sleep_10mins .144 ; [x 10mins] (24h in this example) |
| 195 | |
| 582 | 196 |
| 634 | 197 ; ---- Surface Mode Thresholds and Limits |
| 623 | 198 #DEFINE high_altitude_threshold .880 ; [mbar] ambient pressure at which to switch into high altitude mode |
| 640 | 199 #DEFINE max_surfpressure .1060 ; [mbar] maximum value for internal surface pressure |
| 634 | 200 #DEFINE pressure_noise_threshold .10 ; [mbar] deltaP threshold for start of fast display updating |
| 201 #DEFINE pressure_noise_lag_time .6 ; [1/4 secs] lag time of display updating after deltaP < threshold again | |
| 560 | 202 |
| 203 | |
| 634 | 204 |
| 205 ; ---- Dive Mode Thresholds and Limits | |
| 623 | 206 #DEFINE wake_up_from_sleep .1160 ; [mbar] absolute pressure at which to switch from sleep mode to surface / dive mode |
| 207 #DEFINE dive_threshold_norm_alt_start .125 ; [mbar] relative pressure for normal altitude start-of-dive (equals depth in cm) | |
| 208 #DEFINE dive_threshold_norm_alt_end .75 ; [mbar] relative pressure for normal altitude end-of-dive (equals depth in cm) | |
| 209 #DEFINE dive_threshold_high_alt_start .325 ; [mbar] relative pressure for high altitude start-of-dive (equals depth in cm) | |
| 210 #DEFINE dive_threshold_high_alt_end .75 ; [mbar] relative pressure for high altitude end-of-dive (equals depth in cm) | |
| 211 #DEFINE ostc_depth_max .120 ; [m] maximum allowed operational depth for OSTC 2, 3, cR, TR, Plus & Sport | |
| 628 | 212 #DEFINE deco_region_distance .2 ; [m] distance below first stop for the deco region to begin |
| 192 | 213 |
| 582 | 214 |
| 634 | 215 ; ---- Dive Mode Margins |
| 623 | 216 #DEFINE ppO2_margin_on_max .300 ; [0.1 mbar] extra margin on ppO2 max values to compensate for surface pressures > 1000 hPa |
| 604 | 217 #DEFINE sensor_voting_logic_threshold .10 ; threshold in 0.01 bar |
| 0 | 218 |
| 623 | 219 |
| 634 | 220 ; ---- Gas and Dil types |
| 631 | 221 #DEFINE num_gas_types .4 ; Disabled, First, Normal, Deco |
| 222 #DEFINE num_dil_types .3 ; Disabled, First, Normal | |
| 223 | |
| 224 | |
| 634 | 225 ; ---- ppO2 Limits |
| 623 | 226 #DEFINE ppo2_warning_low_lowest .15 ; [cbar] minimum value for minimum ppO2 on OC |
| 227 #DEFINE ppo2_warning_low_default .17 ; [cbar] default value for minimum ppO2 on OC | |
| 228 #DEFINE ppo2_warning_low_highest .21 ; [cbar] maximum value for minimum ppO2 on OC | |
| 229 | |
| 230 #DEFINE ppo2_warning_loop_lowest .20 ; [cbar] minimum value for minimum ppO2 on loop | |
| 231 #DEFINE ppo2_warning_loop_default .40 ; [cbar] default value for minimum ppO2 on loop | |
| 232 #DEFINE ppo2_warning_loop_highest .60 ; [cbar] maximum value for minimum ppO2 on loop | |
| 233 | |
| 234 #DEFINE ppo2_warning_high_lowest .120 ; [cbar] minimum value for maximum ppO2 in none-deco phase | |
| 628 | 235 #DEFINE ppo2_warning_deco_lowest .120 ; [cbar] minimum value for maximum ppO2 in deco phase |
| 236 | |
| 623 | 237 #DEFINE ppo2_warning_high_default .140 ; [cbar] default value for maximum ppO2 in none-deco phase |
| 238 #DEFINE ppo2_warning_deco_default .160 ; [cbar] default value for maximum ppO2 in deco phase | |
| 628 | 239 |
| 240 IFDEF _high_ppO2_max | |
| 241 #DEFINE ppo2_warning_high_highest .200 ; [cbar] maximum value for maximum ppO2 in none-deco phase | |
| 242 #DEFINE ppo2_warning_deco_highest .200 ; [cbar] maximum value for maximum ppO2 in deco phase | |
| 243 ELSE | |
| 244 #DEFINE ppo2_warning_high_highest .160 ; [cbar] maximum value for maximum ppO2 in none-deco phase | |
| 623 | 245 #DEFINE ppo2_warning_deco_highest .160 ; [cbar] maximum value for maximum ppO2 in deco phase |
| 628 | 246 ENDIF |
| 623 | 247 |
| 634 | 248 |
| 249 ; ---- Salinity Limits | |
| 631 | 250 #DEFINE salinity_min .0 ; [%] minimum value for salinity percentage |
| 251 #DEFINE salinity_max .4 ; [%] maximum value for salinity percentage | |
| 0 | 252 |
| 634 | 253 |
| 254 ; ---- Color-Code Parameters for the Dive Mode | |
| 582 | 255 #DEFINE color_code_velocity_warn_high .11 ; [m/min] |
| 256 #DEFINE color_code_velocity_attn_high .10 ; [m/min] | |
| 623 | 257 #DEFINE velocity_display_threshold .3 ; [m/min] |
| 258 | |
| 259 | |
| 634 | 260 ; ---- Simulator Parameters |
| 623 | 261 #DEFINE simulator_startdepth .200 ; [mbar] initial depth (relative pressure) when entering simulator mode |
| 262 #DEFINE simulator_descent_threshold .50 ; [mbar] remaining distance to target pressure when to slow down descent | |
| 263 #DEFINE simulator_ascent_threshold .50 ; [mbar] remaining distance to target pressure when to slow down ascent | |
| 628 | 264 #DEFINE simulator_descent_rate .5 ; [mbar/0.125 sec] normal descent speed, 5 equals 24 m/min |
| 623 | 265 #DEFINE simulator_ascent_rate .2 ; [mbar/0.125 sec] normal ascent speed, 2 equals 9 m/min |
| 266 | |
| 0 | 267 |
| 634 | 268 ; ---- Battery Thresholds |
| 623 | 269 #DEFINE max_battery_charge_temp .3231 ; [0.1 Kelvin] max allowed battery temperature during charging (equals 50°C) |
| 604 | 270 #DEFINE lithium_36v_empty .2400 ; [mV] Saft 3.6 V LS14500 AA - threshold for battery percent display |
| 623 | 271 #DEFINE lithium_36v_low .2000 ; [mV] Saft 3.6 V LS14500 AA - lowest possible voltage, value must be higher than value of aa_15v_high! |
| 272 #DEFINE aa_15v_high .1550 ; [mV] Energizer 1.5 V E2 AA - highest possible voltage, value must be lower than value of lithium_36v_low! | |
| 273 #DEFINE aa_15v_low .1100 ; [mV] Energizer 1.5 V E2 AA - lowest possible voltage, according to Energizer data sheet EBC-4201R, page 2 | |
| 274 #DEFINE battery_show_level .30 ; [%] threshold when to show battery level | |
| 628 | 275 #DEFINE battery_warn_level_36 .15 ; [%] threshold for 3.6 V battery warning, also acts as threshold for setting display brightness level to ECO when in dive mode |
| 631 | 276 #DEFINE battery_warn_level_15 .25 ; [%] threshold for 1.5 V battery warning, also acts as threshold for setting display brightness level to ECO when in dive mode |
| 0 | 277 |
| 623 | 278 |
| 634 | 279 ; ---- 3.6 Volt Battery Sensing Data Points at 70 mA Load |
| 582 | 280 #DEFINE lithium_36v_75 .3000 ; [mV] |
| 281 #DEFINE lithium_36v_50 .2900 ; [mV] | |
| 282 #DEFINE lithium_36v_25 .2600 ; [mV] | |
| 283 #DEFINE lithium_36v_10 .2500 ; [mV] | |
| 604 | 284 |
| 628 | 285 |
| 634 | 286 ; ---- Capacity for 2.4 Ah Saft LS14500 and 0.8 Ah Panasonic UR14500P |
| 623 | 287 ; battery_gauge: 6 is nAs |
| 448 | 288 ; devide through 65536 |
| 604 | 289 ; a) devide through 364 -> result is in percent of a 2.4 Ah battery |
| 290 ; or b) devide through 121 -> result is in percent of a 0.8 Ah battery | |
|
37
0e1723f2761e
use four additional data points for the battery monitor
mh@mh-THINK.fritz.box
parents:
35
diff
changeset
|
291 |
| 628 | 292 |
| 634 | 293 ; ---- internal Battery Gauging |
| 623 | 294 #DEFINE capacity_saft_internal .364 |
| 295 #DEFINE capacity_panasonic_internal .121 | |
| 296 | |
| 448 | 297 |
| 604 | 298 ; Gauge IC |
| 640 | 299 #DEFINE capacity_saft .271 ; 2.3Ah/0.085mAh/100 [%] |
| 300 #DEFINE offset_saft .38477 ; 65536-(2.3Ah/0.085mAh) | |
| 448 | 301 |
| 640 | 302 #DEFINE capacity_panasonic .94 ; 0.8Ah/0.085mAh/100 [%] |
| 623 | 303 #DEFINE offset_panasonic .56124 ; 65536-(0.8Ah/0.085mAh) |
| 582 | 304 |
| 623 | 305 #DEFINE capacity_ncr18650 .364 ; 3.1Ah/0.085mAh/100 [%] |
| 306 #DEFINE offset_ncr18650 .29065 ; 65536-(3.1Ah/0.085mAh) | |
| 448 | 307 |
| 640 | 308 #DEFINE capacity_ur16650 .235 ; 2.0Ah/0.085mAh/100 [%] |
| 309 #DEFINE offset_ur16650 .42006 ; 65536-(2.0Ah/0.085mAh) | |
| 623 | 310 |
| 582 | 311 |
| 634 | 312 ; ---- Power Consumption Values |
| 582 | 313 #DEFINE current_sleepmode .31 |
| 623 | 314 #DEFINE current_backlight_multi .115 ; * CCPR1L + current_backlight_offset (restricted to <= 255) |
| 582 | 315 #DEFINE current_backlight_offset .216 |
| 316 #DEFINE current_speed_eco .1914 | |
| 317 #DEFINE current_speed_normal .4027 | |
| 318 #DEFINE current_speed_fastest .5050 | |
| 319 #DEFINE current_ir_receiver .139 | |
| 320 #DEFINE current_compass .28 | |
| 0 | 321 |
| 623 | 322 |
| 634 | 323 ; ---- Brightness Thresholds (between zero (off) and 255 (max. power consumption)) |
| 582 | 324 #DEFINE ambient_light_max_high_36V .170 |
| 325 #DEFINE ambient_light_max_high_cr .240 | |
| 326 #DEFINE ambient_light_max_high_15V .140 | |
| 327 #DEFINE ambient_light_min_high .35 | |
| 328 #DEFINE ambient_light_max_medium .125 | |
| 329 #DEFINE ambient_light_min_medium .25 | |
| 330 #DEFINE ambient_light_max_eco .70 | |
| 331 #DEFINE ambient_light_min_eco .10 ; must be the lowest value! | |
| 0 | 332 |
| 623 | 333 |
| 634 | 334 ; ---- IR Link Timeout |
| 631 | 335 #DEFINE ir_timeout_value .128 ; in multiples of 62.5 ms |
| 623 | 336 |
| 0 | 337 |
| 634 | 338 ; ---- Setpoint Control |
| 582 | 339 #DEFINE surface_sp .50 ; in cbar |
|
352
5c6da9fa5cb0
add setpoint change to first sample in CCR mode
heinrichsweikamp
parents:
344
diff
changeset
|
340 |
| 623 | 341 |
| 634 | 342 ; ---- Gaslist hard-coded Limits |
| 343 IFDEF _helium | |
| 344 #DEFINE gaslist_min_o2 .7 ; minimum O2 [%] ( 7% is minimum value to keep MOD < 255 meters / 1 Byte) | |
| 345 #DEFINE gaslist_max_o2 .100 ; maximum O2 [%] | |
| 346 #DEFINE gaslist_max_He .100-gaslist_min_o2 ; maximum He [%] | |
| 347 #DEFINE gaslist_max_change_depth .140 ; max. change depth [m] | |
| 348 #DEFINE tissue_graphics_options .2 ; tissue graphics "Pres+Sat" and "N2+He" available | |
| 349 ELSE | |
| 350 #DEFINE gaslist_min_o2 .21 ; minimum O2 [%] | |
| 351 #DEFINE gaslist_max_o2 .100 ; maximum O2 [%] | |
| 352 #DEFINE gaslist_max_He .0 ; maximum He [%] | |
| 353 #DEFINE gaslist_max_change_depth .70 ; max. change depth [m] | |
| 354 #DEFINE tissue_graphics_options .1 ; tissue graphics "Pres+Sat" only available | |
| 355 ENDIF | |
| 356 | |
| 357 | |
| 358 ; ---- Setpoint list hard-coded Limits | |
| 359 #DEFINE gaslist_sp_max .160 ; max. setpoint [cbar] | |
| 360 #DEFINE gaslist_sp_min .50 ; min. setpoint [cbar] | |
| 361 #DEFINE gaslist_sp_max_depth .100 ; max change depth [m] | |
| 362 | |
| 363 | |
| 364 ; ---- Compass Display | |
| 365 #DEFINE compass_fast_treshold .9 ; show new heading instantly if angular difference > compass_fast_treshold, else show animated turning of compass rose | |
| 366 #DEFINE compass_averaging .10 ; number of averaging cycles | |
| 367 | |
| 368 | |
| 369 ;----------------------------------------------------------------------------- | |
| 370 ; Bit Flags | |
| 371 ;----------------------------------------------------------------------------- | |
| 372 | |
| 373 ; ---- Gas / Diluent Type & State | |
| 631 | 374 ; .0 ; | 0: disabled, 1: first, 2: normal/work, 3: deco |
| 375 ; .1 ; | | |
| 376 #DEFINE gas_lost .2 ; =1: gas/diluent is lost (permanently unavailable) | |
| 377 #DEFINE gas_staged .3 ; =1: gas/diluent is staged (temporary unavailable) | |
| 378 ; .4 ; --- unused | |
| 379 ; .5 ; --- unused | |
| 380 ; .6 ; --- unused | |
| 381 ; .7 ; --- unused | |
| 382 | |
| 634 | 383 ; ---- Bit Flags for Communication with p2_deco.c - char_O_main_status |
| 623 | 384 #DEFINE DECO_VOLUME_FLAG .0 ; =1: calculate gas needs |
| 385 #DEFINE DECO_BOTTOM_FLAG .1 ; =1: calculate gas needs for full bottom segment, =0: ...for extra time only | |
| 386 #DEFINE DECO_CAVE_MODE .2 ; =1: calculate ascent and gas needs using backtracking data | |
| 631 | 387 #DEFINE DECO_GAS_CONTINGENCY .3 ; =1: use a second best gas if best gas is all used up |
| 623 | 388 #DEFINE DECO_TR_FUNCTIONS .4 ; =1: calculate TR functions (pressure readings) |
| 389 #DEFINE DECO_EXTENDED_STOPS .5 ; =1: place gas changes also below 1st stop depth | |
| 390 #DEFINE DECO_MODE_LOOP_FLAG .6 ; =1: calculate real tissues in loop mode (CCR or pSCR) | |
| 391 #DEFINE DECO_MODE_PSCR_FLAG .7 ; =1: calculate real tissues in pSCR mode (loop flag needs to be set, too) | |
| 392 | |
| 634 | 393 ; ---- Bit Flags for Communication with p2_deco.c - char_O_deco_status |
| 623 | 394 #DEFINE DECO_START_NORM .0 ; =1: write: start calculation of a normal deco plan |
| 395 #DEFINE DECO_START_ALT .1 ; =1: write: start calculation of an alternative deco plan | |
| 396 #DEFINE DECO_COMPLETED_NORM .0 ; =1: read: calculation of a normal deco plan has completed | |
| 397 #DEFINE DECO_COMPLETED_ALT .1 ; =1: read: calculation of an alternative deco plan has completed | |
| 398 #DEFINE DECO_INITIALIZE .2 ; =1: write: initialize deco engine (to be done only once at the begin of every dive) | |
| 628 | 399 #DEFINE DECO_CALCULATOR_MODE .3 ; =1: deco engone is run from the deco calculator |
| 623 | 400 #DEFINE DECO_BAILOUT_FLAG .4 ; =1: allow gas switches before first deco stop (used in bailout plans) |
| 631 | 401 #DEFINE DECO_DELAY_FLAG .5 ; =1: figure in a delayed ascent (fTTS) |
| 623 | 402 ; DECO_MODE_LOOP_FLAG .6 ; =1: calculate simulated tissues in loop mode (CCR or pSCR) |
| 403 ; DECO_MODE_PSCR_FLAG .7 ; =1: calculate simulated tissues in pSCR mode (loop flag needs to be set, too) | |
| 404 | |
| 634 | 405 ; ---- Bit Flags for Communication with p2_deco.c - char_O_deco_warnings |
| 623 | 406 #DEFINE IBCD_warning .0 ; =1: IBCD currently occuring |
| 407 #DEFINE IBCD_warning_lock .1 ; =1: IBCD occured durign the dive | |
| 408 #DEFINE mbubble_warning .2 ; =1: microbubbles potentionally currently occuring | |
| 409 #DEFINE mbubble_warning_lock .3 ; =1: microbubbles potentionally occured during the dive | |
| 410 #DEFINE outside_warning .4 ; =1: currently outside the ZHL-16 model | |
| 411 #DEFINE outside_warning_lock .5 ; =1: was outside the ZHL-16 model during the dive | |
| 412 #DEFINE outside_attention .6 ; =1: currently near to the limits of the ZHL-16 model | |
| 628 | 413 #DEFINE deco_plan_incomplete .7 ; =1: internal error: deco calculation incomplete |
| 623 | 414 |
| 634 | 415 ; ---- Bit Flags for Communication with p2_deco.c - char_O_deco_info |
| 628 | 416 #DEFINE deco_mode .0 ; =1: in deco mode, deco ppO2 levels permitted |
| 604 | 417 #DEFINE ind_double_switch .1 ; =1: switch to other tank advice active |
| 631 | 418 #DEFINE gas_needs_fTTS .2 ; =1: indicated gas needs are calculated in fTTS mode |
| 623 | 419 #DEFINE deco_zone .3 ; =1: fTTS is <= TTS (not updated when in bailout mode) |
| 604 | 420 #DEFINE deco_ceiling .4 ; =1: ceiling depth > 0 |
| 631 | 421 #DEFINE deco_stops_norm .5 ; =1: deco stops found in normal plan |
| 422 #DEFINE deco_stops_alt .6 ; =1: deco stops found in alternative plan | |
| 423 #DEFINE gas_needs_cave .7 ; =1: indicated gas needs are calculated in cave mode | |
| 623 | 424 |
| 634 | 425 ; ---- Bit Flags for Status on Variables of Type char |
| 604 | 426 #DEFINE char_transmitter_lost .6 |
| 427 #DEFINE char_invalid_flag .7 | |
| 428 #DEFINE char_transmitter_low_bat .7 | |
| 429 | |
| 634 | 430 ; ---- Bit Flags for Status on Variables of Type int (Flags are placed in the UPPER byte!) |
| 604 | 431 #DEFINE int_invalid_flag .2 |
| 432 #DEFINE int_not_yet_computed .3 | |
| 433 #DEFINE int_is_zero .3 | |
| 434 #DEFINE int_low_flag .4 | |
| 435 #DEFINE int_not_avail_flag .4 | |
| 436 #DEFINE int_high_flag .5 | |
| 437 #DEFINE int_outdated_flag .5 | |
| 438 #DEFINE int_attention_flag .6 | |
| 439 #DEFINE int_warning_flag .7 | |
| 0 | 440 |
| 623 | 441 |
| 0 | 442 ;----------------------------------------------------------------------------- |
| 623 | 443 ; Timebase and Eventbase (stored in access RAM, set by the ISR, trigger flags to be cleared by the application) |
| 634 | 444 ;----------------------------------------------------------------------------- |
| 623 | 445 |
| 446 #DEFINE timebase_0sec timebase,0 ; counting timebase, 1/2 sec bit | |
| 447 #DEFINE timebase_1sec timebase,1 ; counting timebase, 1 sec bit | |
| 448 #DEFINE timebase_2sec timebase,2 ; counting timebase, 2 sec bit | |
| 646 | 449 #DEFINE trigger_quarter_second timebase,3 ; =1: a new 1/4 second has begun (not synced with the other time flags) |
| 623 | 450 #DEFINE trigger_half_second timebase,4 ; =1: a new 1/2 second has begun |
| 451 #DEFINE trigger_full_second timebase,5 ; =1: a new 1/1 second has begun | |
| 452 #DEFINE trigger_full_minute timebase,6 ; =1: a new minute has begun | |
| 453 #DEFINE trigger_full_hour timebase,7 ; =1: a new hour has begun | |
| 454 | |
| 455 #DEFINE trigger_isr_updates eventbase,0 ; =1: the ISR had kicked in (set by ISR, used by ISR-safe copy macros) | |
| 456 #DEFINE trigger_timeout eventbase,1 ; =1: timeout signal by timeout service | |
| 457 #DEFINE trigger_sample_divedata eventbase,2 ; =1: time to store a new sample | |
| 458 #DEFINE trigger_S8_data_update eventbase,3 ; =1: new S8 digital data are available | |
| 634 | 459 ; eventbase,4 ; --- unused |
| 623 | 460 #DEFINE trigger_pres_cur_changed eventbase,5 ; =1: current pressure value has changed |
| 461 #DEFINE trigger_pres_max_changed eventbase,6 ; =1: maximum pressure value has changed | |
| 462 #DEFINE trigger_temp_changed eventbase,7 ; =1: temperature value has changed | |
| 463 | |
| 464 | |
| 465 ;----------------------------------------------------------------------------- | |
| 466 ; Flags - stored in access RAM | |
| 634 | 467 ;----------------------------------------------------------------------------- |
| 623 | 468 |
| 469 ;---- Hardware - OSTC Model Descriptor (stored in access RAM, cleared & rebuilt in restart, to preserve compatibility with 3rd party tools DO NOT alter bit positions) | |
| 470 #DEFINE battery_gauge_available HW_descriptor,0 ; =1: OSTC has rechargeable battery with battery management chip | |
| 471 #DEFINE ambient_sensor HW_descriptor,1 ; =1: OSTC has an ambient light sensor | |
| 634 | 472 #DEFINE ext_input_s8_ana HW_descriptor,2 ; =1: OSTC has S8/analog input |
| 473 #DEFINE ext_input_optical HW_descriptor,3 ; =1: OSTC has optical input | |
| 474 #DEFINE ble_available HW_descriptor,4 ; =1: OSTC has an BT module | |
| 623 | 475 #DEFINE ostc_rx_present HW_descriptor,5 ; =1: OSTC has RX module |
| 476 #DEFINE lv_core HW_descriptor,6 ; =1: OSTC has low-voltage core (2.7V) | |
| 634 | 477 #DEFINE flash_block_write HW_descriptor,7 ; =1: OSTC has FLASH with block-write capability |
| 623 | 478 |
| 479 ;---- Hardware - OSTC Model Variants (stored in access RAM, NOT cleared in restart) | |
| 628 | 480 #DEFINE screen_type1 HW_variants,0 ; =1: display type 1, =0; display type 0 |
| 481 #DEFINE screen_type2 HW_variants,1 ; =1: display type 2, =0: display type 0 or 1 | |
| 482 #DEFINE screen_type3 HW_variants,2 ; =1: display type 3, =0: display type 0 or 1 or 2 | |
| 483 #DEFINE compass_type1 HW_variants,3 ; =1: compass type 1, =0: compass type 0 | |
| 484 #DEFINE compass_type2 HW_variants,4 ; =1: compass type 2, =0: compass type 0 or 1 | |
| 485 #DEFINE compass_type3 HW_variants,5 ; =1: compass type 3, =0: compass type 0 or 1 or 2 | |
| 486 #DEFINE analog_switches HW_variants,6 ; =1: analog switches available | |
| 487 #DEFINE battery_is_36v HW_variants,7 ; =1: a 3.6 Volt battery is detected | |
| 624 | 488 |
| 646 | 489 ;---- Hardware - OSTC Model Variants2 (stored in access RAM, NOT cleared in restart) |
| 490 #DEFINE press_sensor_type HW_variants2,0 ; =1: pressure sensor MS5837, =0: Pressure sensor MS5541 | |
| 491 ; HW_variants2,1 ; --- unused | |
| 492 ; HW_variants2,2 ; --- unused | |
| 493 ; HW_variants2,3 ; --- unused | |
| 494 ; HW_variants2,4 ; --- unused | |
| 495 ; HW_variants2,5 ; --- unused | |
| 496 ; HW_variants2,6 ; --- unused | |
| 497 ; HW_variants2,7 ; --- unused | |
| 623 | 498 |
| 628 | 499 ;---- Hardware - States 1 (stored in access RAM, cleared on restart) |
| 500 #DEFINE analog_sw1_pressed HW_flags_state1,0 ; =1: analog switch 1 pressed | |
| 501 #DEFINE analog_sw2_pressed HW_flags_state1,1 ; =1: analog switch 2 pressed | |
| 502 #DEFINE switch_left HW_flags_state1,2 ; =1: left button was pressed | |
| 503 #DEFINE switch_right HW_flags_state1,3 ; =1: right button was pressed | |
| 504 #DEFINE flip_screen HW_flags_state1,4 ; =1: screen is shown 180° turned | |
| 505 #DEFINE adc_is_running HW_flags_state1,5 ; =1: the ADC is in use | |
| 506 #DEFINE tft_is_dimming HW_flags_state1,6 ; =1: the TFT is dimming, ignore light sensor | |
| 507 #DEFINE compass_enabled HW_flags_state1,7 ; =1: the compass and accelerometer chip is active | |
| 508 | |
| 509 ;---- Hardware - States 2 (stored in access RAM, NOT cleared on restart) | |
| 510 #DEFINE cc_active HW_flags_state2,0 ; =1: constant current charging active (cR hardware only) | |
| 511 #DEFINE cv_active HW_flags_state2,1 ; =1: constant voltage charging active (cR hardware only) | |
| 631 | 512 #DEFINE i2c_error_flag HW_flags_state2,2 ; =1: an I2C error occurred |
| 513 #DEFINE rs232_rx_timeout HW_flags_state2,3 ; =1: RS232 receive timeout occurred | |
| 634 | 514 #DEFINE battery_low_condition HW_flags_state2,4 ; =1: low battery condition detected |
| 515 #DEFINE flash_wrap_around HW_flags_state2,5 ; =1: address wrap-around control / signalling | |
| 516 #DEFINE flash_wait HW_flags_state2,6 ; =1: wait for flash write operation to complete | |
| 646 | 517 #DEFINE i2c_busy_temperature HW_flags_state2,7 ; =1: Currently updating temperature from MS5837 |
| 623 | 518 |
| 646 | 519 ;---- Hardware - States 3 (stored in access RAM, NOT cleared on restart) |
| 520 #DEFINE ms5837_state HW_flags_state3,0 ; =1: result of pressure is in the ADC | |
| 521 #DEFINE i2c_busy_pressure HW_flags_state3,1 ; =1: Currently updating pressure from MS5837 | |
| 522 ; HW_flags_state3,2 ; --- unused | |
| 523 ; HW_flags_state3,3 ; --- unused | |
| 524 ; HW_flags_state3,4 ; --- unused | |
| 525 ; HW_flags_state3,5 ; --- unused | |
| 526 ; HW_flags_state3,6 ; --- unused | |
| 527 ; HW_flags_state3,7 ; --- unused | |
| 528 | |
| 623 | 529 ;---- Operating System - persistent Settings (stored in access RAM, NOT cleared in restart) |
| 530 #DEFINE sensor1_calibrated_ok OS_flags_persist,0 ; =1: sensor 1 calibration ok | |
| 531 #DEFINE sensor2_calibrated_ok OS_flags_persist,1 ; =1: sensor 2 calibration ok | |
| 532 #DEFINE sensor3_calibrated_ok OS_flags_persist,2 ; =1: sensor 3 calibration ok | |
| 533 #DEFINE compass_bearing_set OS_flags_persist,3 ; =1: compass bearing is set | |
| 534 #DEFINE use_old_batt_flag OS_flags_persist,4 ; =1: load old battery data after power-on reset | |
| 634 | 535 #DEFINE option_changed OS_flags_persist,5 ; =1: option values have been changed, EEPROM needs to be updated |
| 631 | 536 #DEFINE restart_fast OS_flags_persist,6 ; =1: request to skip logos and waits on restart |
| 623 | 537 #DEFINE battery_overtemp OS_flags_persist,7 ; =1: battery charging temperature limit exceeded |
| 538 | |
| 539 | |
| 540 ;---- Operating System - ISR Control 1 (stored in access RAM) | |
| 634 | 541 #DEFINE reset_timebase OS_flags_ISR1,0 ; =1: request ISR to reset the timebase for the trigger flags |
| 542 #DEFINE restart_timeout OS_flags_ISR1,1 ; =1: request ISR to resart the timeout timer | |
| 543 #DEFINE reset_max_pressure OS_flags_ISR1,2 ; =1: request ISR to reset the maximum pressure to zero | |
| 544 #DEFINE reset_surface_interval OS_flags_ISR1,3 ; =1: request ISR to reset the surface interval to zero | |
| 545 #DEFINE reset_trip_pressure OS_flags_ISR1,4 ; =1: request ISR to reset the resettable min/max pressure | |
| 623 | 546 #DEFINE block_rtc_access OS_flags_ISR1,5 ; =1: suspend the ISR from accessing the RTC |
| 547 #DEFINE block_battery_gauge OS_flags_ISR1,6 ; =1: suspend the ISR from updating the battery gauge | |
| 548 #DEFINE block_sensor_interrupt OS_flags_ISR1,7 ; =1: suspend the ISR from executing sensor interrupts | |
| 549 | |
| 550 ;---- Operating System - ISR Control 2 (stored in access RAM) | |
| 551 #DEFINE update_surface_pressure OS_flags_ISR2,0 ; =1: request ISR to update the surface pressure | |
| 552 #DEFINE quit_simulatormode OS_flags_ISR2,1 ; =1: request ISR to quit the simulator mode | |
| 553 #DEFINE count_divetime OS_flags_ISR2,2 ; =1: request ISR to count the dive time | |
| 554 #DEFINE sensor_override_request OS_flags_ISR2,3 ; =1: request ISR to override the pressure sensor with a simulated depth | |
| 634 | 555 #DEFINE tmr5_preemtion_allowed OS_flags_ISR2,4 ; =1: allow preemption of timeout counter |
| 640 | 556 #DEFINE button_hold_down_allowed OS_flags_ISR2,5 ; =1: OSTC uses mechanical push buttons |
| 623 | 557 #DEFINE sensor_override_active OS_flags_ISR2,6 ; =1: ISR output: switch to override-mode confirmed |
| 558 #DEFINE divetime_longer_1min OS_flags_ISR2,7 ; =1: ISR output: dive time is >= one minute | |
| 559 | |
| 560 | |
| 561 ;---- Operating Modes (stored in access RAM, persistent) | |
| 562 #DEFINE sleepmode OM_flags_mode,0 ; =1: in sleep mode | |
| 563 #DEFINE divemode OM_flags_mode,1 ; =1: in dive mode | |
| 564 #DEFINE simulatormode OM_flags_mode,2 ; =1: in simulator mode | |
| 565 #DEFINE high_altitude_mode OM_flags_mode,3 ; =1: unit was manually turned on with absolute pressure < 880 mbar | |
| 634 | 566 ; OM_flags_mode,4 ; --- unused |
| 623 | 567 #DEFINE tr_functions_activated OM_flags_mode,5 ; =1: TR module is available and TR mode is <> off |
| 568 #DEFINE cold_start OM_flags_mode,6 ; =1: restart is entered from a cold start | |
| 569 IFDEF _screendump | |
| 570 #DEFINE screen_dump_avail OM_flags_mode,7 ; =1: screen dump function is available | |
| 571 ELSE | |
| 572 #DEFINE comm_mode_disabled OM_flags_mode,7 ; =1: COMM mode is disabled | |
| 573 ENDIF | |
| 574 | |
| 575 | |
| 576 ;---- Dive Modes - Deco Modes (stored in access RAM) | |
| 577 #DEFINE FLAG_oc_mode DM_flags_deco,0 ; =1: in OC mode active | |
| 578 #DEFINE FLAG_ccr_mode DM_flags_deco,1 ; =1: in CCR mode (fixed ppO2 or sensor) active | |
| 579 #DEFINE FLAG_gauge_mode DM_flags_deco,2 ; =1: in gauge mode | |
| 580 #DEFINE FLAG_apnoe_mode DM_flags_deco,3 ; =1: in apnoe mode | |
| 581 #DEFINE FLAG_pscr_mode DM_flags_deco,4 ; =1: in pSCR mode | |
| 582 #DEFINE bailout_mode DM_flags_deco,5 ; =1: in bailout mode | |
| 583 #DEFINE apnoe_at_surface DM_flags_deco,6 ; =1: at the surface, 0= submerged (apnoe mode only, set/reset by ISR) | |
| 584 #DEFINE apnoe_new_dive DM_flags_deco,7 ; =1: a new dive has begun (apnoe mode only, set by ISR) | |
| 585 | |
| 586 | |
| 587 ;----------------------------------------------------------------------------- | |
| 588 ; Flags - stored in bank common | |
| 634 | 589 ;----------------------------------------------------------------------------- |
| 623 | 590 |
| 591 ;---- Dive Mode - Dive States | |
| 592 #DEFINE use_aGF DM_flags_state,0 ; =1: use aGF, =0: use GF | |
| 631 | 593 #DEFINE deco_locked DM_flags_state,1 ; =1: in or has been in deco obligation during the dive |
| 594 #DEFINE deco_region DM_flags_state,2 ; =1: in or has been in the deco stops region during the dive | |
| 595 #DEFINE cave_mode DM_flags_state,3 ; =1: cave mode is active (cave mode) | |
| 596 #DEFINE dive_turned DM_flags_state,4 ; =1: dive is turned (cave mode) | |
| 597 #DEFINE backtrack_almost_full DM_flags_state,5 ; =1: the backtracking storage is almost full (cave mode) | |
| 598 #DEFINE backtrack_entire_full DM_flags_state,6 ; =1: the backtracking storage is entirely full (cave mode) | |
| 599 #DEFINE backtrack_shutdown DM_flags_state,7 ; =1: the backtracking has shut down due to entirely full (cave mode) | |
| 582 | 600 |
| 640 | 601 ;---- Dive Mode - O2 Sensors & Setpoint |
| 623 | 602 #DEFINE use_O2_sensor1 DM_flags_sensor,0 ; =1: sensor 1 shall be used |
| 603 #DEFINE use_O2_sensor2 DM_flags_sensor,1 ; =1: sensor 2 shall be used | |
| 604 #DEFINE use_O2_sensor3 DM_flags_sensor,2 ; =1: sensor 3 shall be used | |
| 605 #DEFINE voting_logic_sensor1 DM_flags_sensor,3 ; =1: sensor 1 is within the voting logic threshold | |
| 606 #DEFINE voting_logic_sensor2 DM_flags_sensor,4 ; =1: sensor 2 is within the voting logic threshold | |
| 607 #DEFINE voting_logic_sensor3 DM_flags_sensor,5 ; =1: sensor 3 is within the voting logic threshold | |
| 634 | 608 ; DM_flags_sensor,6 ; --- unused |
| 640 | 609 #DEFINE restart_auto_sp DM_flags_sensor,7 ; =1: re-run the auto SP selection from 1st SP |
| 623 | 610 |
| 631 | 611 ;---- Dive Mode - User Requests / General |
| 612 #DEFINE request_gas_change DM_flags_request,0 ; =1: request to change the gas | |
| 613 #DEFINE request_gas_update DM_flags_request,1 ; =1: request to update the gas | |
| 614 #DEFINE request_reset_avg DM_flags_request,2 ; =1: request to reset the average depth | |
| 615 #DEFINE request_next_custview DM_flags_request,3 ; =1: request to show the next custom view | |
| 616 #DEFINE request_back_to_loop DM_flags_request,4 ; =1: request to switch back from bailout to loop | |
| 617 #DEFINE request_toggle_GF DM_flags_request,5 ; =1: request to toggle between GF and aGF | |
| 618 #DEFINE request_set_marker DM_flags_request,6 ; =1: request to set a marker in the logbook | |
| 619 #DEFINE request_restart_engine DM_flags_request,7 ; =1: request to restart the deco engine | |
| 620 | |
| 621 ;---- Dive Mode - User Requests / Cave Mode | |
| 622 #DEFINE request_cave_toggle DM_flags_cavereq,0 ; =1: request to toggle cave mode off/on (cave mode) | |
| 623 #DEFINE request_cave_off_turned DM_flags_cavereq,1 ; =1: request to switch cave mode off (cave mode) | |
| 624 #DEFINE request_turn_toggle DM_flags_cavereq,2 ; =1: request to toggle dive turned state (cave mode) | |
| 625 #DEFINE request_turn_turn DM_flags_cavereq,3 ; =1: request to switch dive turned state to turned (cave mode) | |
| 626 #DEFINE request_waypoint_set DM_flags_cavereq,4 ; =1: request to set a waypoint (cave mode) | |
| 627 #DEFINE request_waypoint_out DM_flags_cavereq,5 ; =1: request to go one waypoint out of the cave (cave mode) | |
| 628 #DEFINE request_waypoint_in DM_flags_cavereq,6 ; =1: request to go one waypoint into the cave (cave mode) | |
| 629 ; DM_flags_cavereq,7 ; --- unused | |
| 623 | 630 |
| 631 ;---- Dive Mode - Data Recording Events | |
| 632 #DEFINE event_occured DM_flags_event,0 ; =1: an event occurred (global indicator flag) | |
| 633 #DEFINE event_gas_change DM_flags_event,1 ; =1: a change to another gas or diluent occurred | |
| 634 #DEFINE event_gas_change_gas6 DM_flags_event,2 ; =1: a change to or of the gas 6 has occurred | |
| 635 #DEFINE event_bailout DM_flags_event,3 ; =1: a change to or of the OC gas occurred due to bailout | |
| 636 #DEFINE event_SP_change DM_flags_event,4 ; =1: a change of the setpoint has occurred | |
| 637 ; DM_flags_event,5 ; --- unused | |
| 631 | 638 ; DM_flags_event,6 ; --- unused |
| 639 ; DM_flags_event,7 ; --- unused | |
| 623 | 640 |
| 641 ;---- Dive Mode - Display Control / Layout | |
| 642 #DEFINE safety_stop_enabled DM_flags_layout1,0 ; =1: safety stop is enabled | |
| 643 #DEFINE safety_stop_active DM_flags_layout1,1 ; =1: safety stop is shown | |
| 644 #DEFINE decostop_active DM_flags_layout1,2 ; =1: decompression stop is shown | |
| 645 #DEFINE velocity_active_num DM_flags_layout1,3 ; =1: numerical velocity indicator is shown | |
| 646 #DEFINE velocity_active_vsi DM_flags_layout1,4 ; =1: graphical velocity indicator is shown | |
| 647 #DEFINE alt_layout_active DM_flags_layout1,5 ; =1: the alternative dive layout is used (aka "blind mode") | |
| 648 #DEFINE neg_flag_velocity DM_flags_layout1,6 ; =1: descending, used by velocity logic | |
| 649 #DEFINE show_only_divemins DM_flags_layout1,7 ; =1: only dive minutes are shown | |
| 650 | |
| 651 #DEFINE cur_depth_greater_100m DM_flags_layout2,0 ; =1: current depth > 100 meters | |
| 652 #DEFINE max_depth_greater_100m DM_flags_layout2,1 ; =1: max. depth > 100 meters | |
| 634 | 653 #DEFINE depth_color_attention DM_flags_layout2,2 ; =1: show depth in attention color |
| 654 #DEFINE depth_color_warning DM_flags_layout2,3 ; =1: show depth in warning color | |
| 655 #DEFINE depth_color_last DM_flags_layout2,4 ; =1: last depth was shown in warning or attention color | |
| 623 | 656 #DEFINE depth_inverse_last DM_flags_layout2,5 ; =1: last depth was shown in inverse |
| 634 | 657 #DEFINE gas_needs_mode_last DM_flags_layout2,6 ; =1: last gas needs were computed for cave mode, =0: vertical ascent |
| 658 #DEFINE tts_over_99_last DM_flags_layout2,7 ; =1: last TTS was > 99 minutes | |
| 623 | 659 |
| 631 | 660 #DEFINE tissue_graphic_layout DM_flags_layout3,0 ; =1: show pres+sat, =0: show N2/He pressures |
| 661 #DEFINE tissue_graphic_gf DM_flags_layout3,1 ; =1: show GF lines | |
| 662 #DEFINE tissue_graphic_cns DM_flags_layout3,2 ; =1: shwo CNS value (surface mode graphic only) | |
| 663 #DEFINE tissue_graphic_mode DM_flags_layout3,3 ; =1: logbook mode (surface mode graphic only) | |
| 664 ; DM_flags_layout3,4 ; --- unused | |
| 665 ; DM_flags_layout3,5 ; --- unused | |
| 666 ; DM_flags_layout3,6 ; --- unused | |
| 667 ; DM_flags_layout3,7 ; --- unused | |
| 668 | |
| 669 | |
| 670 ;---- Dive Mode - Display Control / Gas, Diluent, Depth | |
| 623 | 671 #DEFINE better_gas_hint DM_flags_gas_dil,0 ; =1: mark a gas when it is a better gas |
| 631 | 672 #DEFINE color_code_gases DM_flags_gas_dil,1 ; =1: color code the gases by ppO2 & current depth |
| 673 #DEFINE better_gas_available DM_flags_gas_dil,2 ; =1: a better gas is available | |
| 674 #DEFINE better_gas_blinking DM_flags_gas_dil,3 ; =1: gas is blinking | |
| 675 #DEFINE better_dil_available DM_flags_gas_dil,4 ; =1: a better diluent is available | |
| 676 #DEFINE better_dil_blinking DM_flags_gas_dil,5 ; =1: diluent is blinking | |
| 677 #DEFINE gas6_or_EXIT DM_flags_gas_dil,6 ; =1: exit menu, =0: provide gas6 option | |
| 634 | 678 ; DM_flags_gas_dil,7 ; --- unused |
| 679 | |
| 680 | |
| 681 ;---- Dive Mode - Display Control / Messages | |
| 682 #DEFINE sign_shown DM_flags_message,0 ; =1: the warning/attention/advice sign is shown | |
| 683 #DEFINE sign_advice DM_flags_message,1 ; =1: the sign shown is an advice sign | |
| 684 #DEFINE sign_attention DM_flags_message,2 ; =1: the sign shown is an attention sign | |
| 685 #DEFINE sign_warning DM_flags_message,3 ; =1: the sign shown is a warning sign | |
| 686 #DEFINE message_2nd_row_used DM_flags_message,4 ; =1: the second row contains a warning/attention/advice | |
| 687 ; DM_flags_message,5 ; --- unused | |
| 688 ; DM_flags_message,6 ; --- unused | |
| 689 ; DM_flags_message,7 ; --- unused | |
| 690 | |
| 691 | |
| 692 ;---- Dive Mode - Display Control / Advices | |
| 693 #DEFINE advc_det_change_gas DM_flags_advc_det,0 ; =1: change gas advice | |
| 694 #DEFINE advc_det_switch_tank DM_flags_advc_det,1 ; =1: change tank advice | |
| 695 ; DM_flags_advc_det,2 ; --- unused | |
| 696 ; DM_flags_advc_det,3 ; --- unused | |
| 697 ; DM_flags_advc_det,4 ; --- unused | |
| 698 ; DM_flags_advc_det,5 ; --- unused | |
| 699 ; DM_flags_advc_det,6 ; --- unused | |
| 700 ; DM_flags_advc_det,7 ; --- unused | |
| 701 | |
| 702 | |
| 703 ;---- Dive Mode - Display Control / Attentions | |
| 704 #DEFINE attn_det_gas_needs DM_flags_att1_det,0 ; =1: gas needs attention threshold reached | |
| 705 #DEFINE attn_det_ppo2_breathed DM_flags_att1_det,1 ; =1: breathed ppO2 attention threshold reached | |
| 706 #DEFINE attn_det_ppo2_diluent DM_flags_att1_det,2 ; =1: diluent ppO2 attention threshold reached | |
| 707 #DEFINE attn_det_cns_current DM_flags_att1_det,3 ; =1: current CNS attention threshold reached | |
| 708 #DEFINE attn_det_gas_density DM_flags_att1_det,4 ; =1: gas density attention threshold reached | |
| 709 #DEFINE attn_det_saturation DM_flags_att1_det,5 ; =1: tissue saturation attention threshold reached | |
| 710 #DEFINE attn_det_outside DM_flags_att1_det,6 ; =1: outside model attention issued | |
| 711 #DEFINE attn_det_microbubble DM_flags_att1_det,7 ; =1: µ-bubble attention issued | |
| 712 | |
| 713 #DEFINE attn_det_sac_rate DM_flags_att2_det,0 ; =1: SAC rate attention threshold reached | |
| 714 #DEFINE attn_det_pressure1 DM_flags_att2_det,1 ; =1: tank 1 pressure attention threshold reached | |
| 715 #DEFINE attn_det_pressure2 DM_flags_att2_det,2 ; =1: tank 2 pressure attention threshold reached | |
| 716 #DEFINE attn_det_ibcd DM_flags_att2_det,3 ; =1: IBCD attention issued | |
| 717 #DEFINE attn_det_cave_shut_down DM_flags_att2_det,4 ; =1: cave mode shutdown attention issued | |
| 718 #DEFINE attn_det_sensor1_lost DM_flags_att2_det,5 ; =1: sensor 1 lost attention issued | |
| 719 #DEFINE attn_det_sensor2_lost DM_flags_att2_det,6 ; =1: sensor 2 lost attention issued | |
| 720 #DEFINE attn_det_sensor3_lost DM_flags_att2_det,7 ; =1: sensor 3 lost attention issued | |
| 721 | |
| 722 #DEFINE attn_det_xmit1_bat DM_flags_att3_det,0 ; =1: xmitter 1 low batt attention issued | |
| 723 #DEFINE attn_det_xmit2_bat DM_flags_att3_det,1 ; =1: xmitter 2 low batt attention issued | |
| 724 #DEFINE attn_det_cns_eod DM_flags_att3_det,2 ; =1: end-of-dive CNS attention threshold reached | |
| 725 ; DM_flags_att3_det,3 ; --- unused | |
| 726 ; DM_flags_att3_det,4 ; --- unused | |
| 727 ; DM_flags_att3_det,5 ; --- unused | |
| 728 ; DM_flags_att3_det,6 ; --- unused | |
| 729 ; DM_flags_att3_det,7 ; --- unused | |
| 730 | |
| 731 ;---- Dive Mode - Display Control / Warnings | |
| 732 #DEFINE warn_det_gas_needs DM_flags_war1_det,0 ; =1: gas needs warning threshold reached | |
| 733 #DEFINE warn_det_ppO2_breathed DM_flags_war1_det,1 ; =1: breathed ppO2 warning threshold reached | |
| 734 #DEFINE warn_det_ppO2_diluent DM_flags_war1_det,2 ; =1: diluent ppO2 warning threshold reached | |
| 735 #DEFINE warn_det_cns_current DM_flags_war1_det,3 ; =1: current CNS warning threshold reached | |
| 736 #DEFINE warn_det_gas_density DM_flags_war1_det,4 ; =1: gas density warning threshold reached | |
| 737 #DEFINE warn_det_saturation DM_flags_war1_det,5 ; =1: tissue saturation warning threshold reached | |
| 738 #DEFINE warn_det_outside DM_flags_war1_det,6 ; =1: outside model warning issued | |
| 739 #DEFINE warn_det_microbubble DM_flags_war1_det,7 ; =1: µ-bubble warning issued | |
| 740 | |
| 741 #DEFINE warn_det_cave_shut_down DM_flags_war2_det,0 ; =1: cave mode shutdown warning issued | |
| 742 #DEFINE warn_det_pressure1 DM_flags_war2_det,1 ; =1: tank pressure 1 warning threshold reached | |
| 743 #DEFINE warn_det_pressure2 DM_flags_war2_det,2 ; =1: tank pressure 2 warning threshold reached | |
| 744 #DEFINE warn_det_batt_low DM_flags_war2_det,3 ; =1: battery low warning issued | |
| 745 #DEFINE warn_det_depth_limit DM_flags_war2_det,4 ; =1: depth limit warning issued | |
| 746 #DEFINE warn_det_sensors_lost DM_flags_war2_det,5 ; =1: sensors lost warning issued | |
| 747 #DEFINE warn_det_sensors_div DM_flags_war2_det,6 ; =1: sensors divergence warning issued | |
| 748 #DEFINE warn_det_no_bo_gas DM_flags_war2_det,7 ; =1: no B/O gas avail warning issued | |
| 749 | |
| 750 | |
| 751 ;---- Dive Mode - Display Control / Custom View automatic show-up | |
| 752 #DEFINE shown_gas_needs_attn DM_flags_shown1,0 ; =1: gas needs attention has been shown before | |
| 753 #DEFINE shown_gas_needs_warn DM_flags_shown1,1 ; =1: gas needs warning has been shown before | |
| 754 #DEFINE shown_sensors_diverg DM_flags_shown1,2 ; =1: sensor divergence has been shown before | |
| 755 #DEFINE shown_sensors_lost DM_flags_shown1,3 ; =1: sensor all lost has been shown before | |
| 756 #DEFINE shown_sensor1_fail DM_flags_shown1,4 ; =1: sensor 1 failure has been shown before | |
| 757 #DEFINE shown_sensor2_fail DM_flags_shown1,5 ; =1: sensor 2 failure has been shown before | |
| 758 #DEFINE shown_sensor3_fail DM_flags_shown1,6 ; =1: sensor 3 failure has been shown before | |
| 759 ; DM_flags_shown1,7 ; --- unused | |
| 760 | |
| 761 #DEFINE shown_xmit1_lost DM_flags_shown2,0 ; =1: xmitter 1 lost has been shown before | |
| 762 #DEFINE shown_xmit1_battery DM_flags_shown2,1 ; =1: xmitter 1 batt low has been shown before | |
| 763 #DEFINE shown_xmit1_pres_warn DM_flags_shown2,2 ; =1: xmitter 1 pres warn has been shown before | |
| 764 #DEFINE shown_xmit1_pres_attn DM_flags_shown2,3 ; =1: xmitter 1 pres attn has been shown before | |
| 765 #DEFINE shown_xmit2_lost DM_flags_shown2,4 ; =1: xmitter 2 lost has been shown before | |
| 766 #DEFINE shown_xmit2_battery DM_flags_shown2,5 ; =1: xmitter 2 batt low has been shown before | |
| 767 #DEFINE shown_xmit2_pres_warn DM_flags_shown2,6 ; =1: xmitter 2 pres warn has been shown before | |
| 768 #DEFINE shown_xmit2_pres_attn DM_flags_shown2,7 ; =1: xmitter 2 pres attn has been shown before | |
| 769 | |
| 770 #DEFINE shown_gas_density_attn DM_flags_shown3,0 ; =1: gas density atten. has been shown before | |
| 771 #DEFINE shown_gas_density_warn DM_flags_shown3,1 ; =1: gas density warning has been shown before | |
| 772 ; DM_flags_shown3,2 ; --- unused | |
| 773 ; DM_flags_shown3,3 ; --- unused | |
| 774 ; DM_flags_shown3,4 ; --- unused | |
| 775 ; DM_flags_shown3,5 ; --- unused | |
| 776 ; DM_flags_shown3,6 ; --- unused | |
| 777 ; DM_flags_shown3,7 ; --- unused | |
| 778 | |
| 623 | 779 |
| 780 ;---- Menu System - Control | |
| 634 | 781 #DEFINE surfmode_menu MS_flags_control,0 ; =1: surface menu is shown (i.e. returning from it) |
| 782 #DEFINE dive_pre_menu MS_flags_control,1 ; =1: dive pre-menu is shown (e.g. "Menu?") | |
| 783 #DEFINE dive_main_menu MS_flags_control,2 ; =1: dive main menu is shown (i.e. the "big" menu) | |
| 623 | 784 #DEFINE compass_menu MS_flags_control,3 ; =1: "set bearing" is shown |
| 785 #DEFINE is_diluent_menu MS_flags_control,4 ; =1: setting up diluents, =0: setting up OC gases | |
| 786 #DEFINE is_bailout_menu MS_flags_control,5 ; =1: in bailout menu | |
| 631 | 787 #DEFINE custom_view_locked MS_flags_control,6 ; =1: the custom view is locked (defer CV auto-popup) |
| 634 | 788 #DEFINE option_stop_at_max MS_flags_control,7 ; =1: option increment will stop at max value (no wrap around) |
| 623 | 789 |
| 790 ;---- Menu System - Data Imprinting | |
| 791 #DEFINE imprint_time_date MS_flags_imprint,0 ; =1: imprint current time & date | |
| 792 #DEFINE imprint_color_schemes MS_flags_imprint,1 ; =1: imprint color schemes | |
| 793 #DEFINE imprint_sensor_mv MS_flags_imprint,2 ; =1: imprint O2 sensor mV data | |
| 794 #DEFINE imprint_xmitter_pres MS_flags_imprint,3 ; =1: imprint transmitter pressure data | |
| 795 #DEFINE imprint_xmitter_ID MS_flags_imprint,4 ; =1: in transmitter-to-tank pairing menu | |
| 796 #DEFINE imprint_surfmode_data MS_flags_imprint,5 ; =1: imprint surface mode data | |
| 634 | 797 #DEFINE block_option_value MS_flags_imprint,6 ; =1: suspend displaying of option values |
| 798 #DEFINE short_gas_descriptions MS_flags_imprint,7 ; =1: use short versions of gaslist_strcat_gas_cd and gaslist_strcat_setpoint | |
| 623 | 799 |
| 0 | 800 |
| 623 | 801 ;---- Font & Image System |
| 802 #DEFINE aa_antialias AA_flags,0 ; used by aa_wordprocessor | |
| 803 #DEFINE aa_color_quarter AA_flags,1 ; used by aa_wordprocessor | |
| 804 #DEFINE aa_color_half AA_flags,2 ; used by aa_wordprocessor | |
| 805 #DEFINE aa_aux_flag AA_flags,3 ; auxiliary flag for various purposes | |
| 806 #DEFINE use_custom_colors AA_flags,4 ; =1: override default pixel colors, used by color_image | |
| 634 | 807 #DEFINE win_invert AA_flags,5 ; =1: print in inverse video |
| 623 | 808 ; AA_flags,6 ; --- unused |
| 809 ; AA_flags,7 ; --- unused | |
| 810 | |
| 811 | |
| 634 | 812 ;---- Convert Functions (Control of numerical Output) |
| 813 | |
| 814 #DEFINE hide_digit5 CVT_flags1,0 ; =1: do not print digit 5 (clip output at 9999) | |
| 815 #DEFINE hide_digit4 CVT_flags1,1 ; =1: do not print digits 5-4 (clip output at 999) | |
| 816 #DEFINE hide_digit3 CVT_flags1,2 ; =1: do not print digits 5-3 (clip output at 99) | |
| 817 #DEFINE hide_digit2 CVT_flags1,3 ; =1: do not print digits 5-2 (clip output at 9) | |
| 818 #DEFINE omit_digit_1 CVT_flags1,4 ; =1: do not print digit 1 (show output as xxxx-) | |
| 819 #DEFINE omit_digit_2 CVT_flags1,5 ; =1: do not print digits 2-1 (show output as xxx--) | |
| 631 | 820 ; CVT_flags1,6 ; --- unused |
| 623 | 821 ; CVT_flags1,7 ; --- unused |
| 0 | 822 |
| 634 | 823 #DEFINE decimal_digit1 CVT_flags2,0 ; =1: put a decimal point in front of digit 1 |
| 824 #DEFINE decimal_digit2 CVT_flags2,1 ; =1: put a decimal point in front of digit 2 | |
| 825 #DEFINE decimal_digit3 CVT_flags2,2 ; =1: put a decimal point in front of digit 3 | |
| 826 ; CVT_flags2,3 ; --- unused | |
| 827 #DEFINE leftbind CVT_flags2,4 ; =1: align output to the left (no leading spaces) | |
| 828 #DEFINE leading_zeros CVT_flags2,5 ; =1: print leading zeros | |
| 829 #DEFINE output_overflow CVT_flags2,6 ; =1: the printed number is clipped to 9999/999/99/9 | |
| 830 ; CVT_flags2,7 ; --- unused | |
| 623 | 831 |
| 832 | |
| 631 | 833 ;---- Miscellaneous Flags |
| 623 | 834 #DEFINE ignore_last_edited_gas misc_flags,0 ; =1: ignore last edited gas while cleaning up gas/dil list |
| 835 #DEFINE copying_dil misc_flags,1 ; =1: copying a diluent | |
| 631 | 836 #DEFINE comm_service_mode misc_flags,2 ; =1: service mode (extended command set) is enabled |
| 837 #DEFINE waypoint_reached_first misc_flags,3 ; =1: the first (most outside) waypoint is reached (cave mode) | |
| 838 #DEFINE waypoint_reached_last misc_flags,4 ; =1: the last (most inside) waypoint is reached (cave mode) | |
| 634 | 839 #DEFINE option_value_ok misc_flags,5 ; =1: option value was checked to be within min/max limits |
| 840 #DEFINE aux_flag misc_flags,6 ; local flag, used in various places | |
| 841 #DEFINE neg_flag misc_flags,7 ; =1: result is negative | |
| 842 | |
| 623 | 843 |
| 844 ;---- HUD Status Byte (stored in access RAM) | |
| 604 | 845 #DEFINE hud_connection_ok hud_status_byte,0 ; =1 HUD connection ok |
| 846 ; hud_status_byte,1 ; =1 HUD is calibrated | |
| 623 | 847 ; hud_status_byte,2 ; =1 HUD battery is low (< 3000 mV) |
| 604 | 848 #DEFINE sensor1_active hud_status_byte,3 ; =1: sensor 1 is active |
| 849 #DEFINE sensor2_active hud_status_byte,4 ; =1: sensor 2 is active | |
| 850 #DEFINE sensor3_active hud_status_byte,5 ; =1: sensor 3 is active | |
| 851 ; hud_status_byte,6 ; --- unused in stand-alone HUD | |
| 852 ; hud_status_byte,7 ; --- unused in stand-alone HUD | |
| 0 | 853 |
| 582 | 854 |
| 634 | 855 ;----------------------------------------------------------------------------- |
| 856 ; Macros | |
| 857 ;----------------------------------------------------------------------------- | |
| 582 | 858 |
| 634 | 859 ; ---- options checking |
| 631 | 860 |
| 623 | 861 TSTOSS macro opt_reg ; TeST Option Skip next instruction if Set (not zero) |
| 631 | 862 movff opt_reg,EEDATA ; Attention: destroys EEDATA! |
| 646 | 863 tstfsz EEDATA ; Attention: must be followed by a plain machine |
| 623 | 864 bra $+4 ; command, do not let follow a macro! |
| 865 endm ; | |
| 866 | |
| 867 TSTOSC macro opt_reg ; TeST Option Skip next instruction if Clear (zero) | |
| 631 | 868 movff opt_reg,EEDATA ; Attention: destroys EEDATA! |
| 646 | 869 tstfsz EEDATA ; Attention: must be followed by a plain machine |
| 623 | 870 endm ; command, do not let follow a macro! |
| 871 | |
| 872 | |
| 634 | 873 ; ---- literal operations |
| 631 | 874 |
| 875 CLRI macro address ; CLeaR Integer (version of clrf for 2 byte integers) | |
| 876 clrf address+0 ; Attention: must be in bank where target variable resides! | |
| 877 clrf address+1 ; | |
| 878 endm ; | |
| 879 | |
| 880 CLRT macro address ; CLeaR Three byte integer (version of clrf for 3 byte integers) | |
| 881 clrf address+0 ; Attention: must be in bank where target variable resides! | |
| 882 clrf address+1 ; | |
| 883 clrf address+2 ; | |
| 623 | 884 endm ; |
| 885 | |
| 631 | 886 CLRR macro address,range ; CLeaR a Range of bytes (version of clrf for 1-256 bytes) |
| 887 movlw low(range) ; initialize loop counter | |
| 888 lfsr FSR1,address ; set start address | |
| 889 extern memory_clear | |
| 890 call memory_clear | |
| 891 endm | |
| 623 | 892 |
| 631 | 893 SETI macro address ; SET Integer (version of setf for 2 byte integers) |
| 894 setf address+0 ; Attention: must be in bank where target variable resides! | |
| 895 setf address+1 ; | |
| 623 | 896 endm ; |
| 897 | |
| 631 | 898 MOVLI macro literal,address ; MOVe Literal to Integer |
| 899 movlw LOW (literal) ; Attention: destroys WREG! | |
| 900 movwf address+0 ; Attention: must be in bank where target variable resides! | |
| 901 movlw HIGH (literal) ; | |
| 902 movwf address+1 ; | |
| 623 | 903 endm ; |
| 904 | |
| 905 | |
| 634 | 906 ; ---- arithetics |
| 631 | 907 |
| 908 INCI macro address ; INCrement Integer (version of incf for 2 byte integers) | |
| 909 infsnz address+0,F ; Attention: must be in bank where target variable resides! | |
| 910 incf address+1,F ; | |
| 623 | 911 endm ; |
| 912 | |
| 631 | 913 DECI macro address ; DECrement Integer (version of decf for 2 byte integers) |
| 623 | 914 movlw .1 ; Attention: destroys WREG! |
| 631 | 915 subwf address+0,F ; Attention: must be in bank where target variable resides! |
| 623 | 916 movlw .0 ; |
| 631 | 917 subwfb address+1,F ; |
| 918 endm ; | |
| 919 | |
| 920 ADDLI macro literal, address ; ADD Literal to Integer | |
| 921 movlw LOW (literal) ; Attention: destroys WREG! | |
| 922 addwf address+0,F ; Attention: must be in bank where target variable resides! | |
| 923 movlw HIGH (literal) ; | |
| 924 addwfc address+1,F ; | |
| 925 endm ; | |
| 926 | |
| 927 SUBLI macro literal, address ; SUBtract Literal from Integer | |
| 928 movlw LOW (literal) ; Attention: destroys WREG! | |
| 929 subwf address+0,F ; Attention: must be in bank where target variable resides! | |
| 930 movlw HIGH (literal) ; | |
| 931 subwfb address+1,F ; | |
| 623 | 932 endm ; |
| 933 | |
| 934 | |
| 634 | 935 ; ---- moves |
| 631 | 936 |
| 937 MOVCC macro from,to ; MOVe 1 byte Char (actually an alias for movff) | |
| 938 movff from,to | |
| 939 endm | |
| 940 | |
| 941 MOVII macro from,to ; MOVe 2 byte Integer (version of movff for 2 bytes) | |
| 942 movff from+0,to+0 ; copy 1st byte | |
| 943 movff from+1,to+1 ; copy 2nd byte | |
| 623 | 944 endm ; |
| 945 | |
| 631 | 946 MOVTT macro from,to ; MOVe Three byte Integer (version of movff for 3 bytes) |
| 947 movff from+0,to+0 ; copy 1st byte | |
| 948 movff from+1,to+1 ; copy 2nd byte | |
| 949 movff from+2,to+2 ; copy 3rd byte | |
| 950 endm ; | |
| 951 | |
| 952 MOVRR macro from,to,range ; MOVe a Range of bytes (version of movff for 1-256 bytes) | |
| 953 movlw low(range) ; initialize loop counter | |
| 954 lfsr FSR1,from ; from | |
| 955 lfsr FSR2,to ; to | |
| 956 extern memory_move | |
| 957 call memory_move | |
| 958 endm | |
| 959 | |
| 623 | 960 |
| 634 | 961 ; ---- ISR-safe moves |
| 623 | 962 |
| 631 | 963 SMOVII macro from, to ; isr-Safe MOVe 2 byte Integer (version of MOVII for ISR-safe copying) |
| 623 | 964 local retry ; |
| 965 retry: | |
| 966 bcf trigger_isr_updates ; clear flag, it will be set by the ISR in case it had kicked in | |
| 967 movff from+0,to+0 ; copy low byte | |
| 968 movff from+1,to+1 ; copy high byte | |
| 969 btfsc trigger_isr_updates ; did the ISR kicked in since we cleared the flag? | |
| 970 bra retry ; YES - retry copy | |
| 971 endm ; NO - done | |
| 972 | |
| 631 | 973 SMOVTT macro from, to ; isr-Safe MOVe Three byte integer (version of MOVTT for ISR-safe copying) |
| 623 | 974 local retry ; |
| 975 retry: | |
| 976 bcf trigger_isr_updates ; clear flag, it will be set by the ISR in case it had kicked in | |
| 977 movff from+0,to+0 ; copy low byte | |
| 978 movff from+1,to+1 ; copy high byte | |
| 979 movff from+2,to+2 ; copy upper byte | |
| 980 btfsc trigger_isr_updates ; did the ISR kicked in since we cleared the flag? | |
| 981 bra retry ; YES - retry copy | |
| 982 endm ; NO - done | |
| 983 | |
| 631 | 984 SMOVQQ macro from, to ; isr-Safe MOVe Quad byte integer (version of MOVII for ISR-safe copying) |
| 623 | 985 local retry ; |
| 986 retry: | |
| 987 bcf trigger_isr_updates ; clear flag, it will be set by the ISR in case it had kicked in | |
| 988 movff from+0,to+0 ; copy byte 0 (LSB) | |
| 989 movff from+1,to+1 ; copy byte 1 | |
| 990 movff from+2,to+2 ; copy byte 2 | |
| 991 movff from+3,to+3 ; copy byte 3 (MSB) | |
| 992 btfsc trigger_isr_updates ; did the ISR kicked in since we cleared the flag? | |
| 993 bra retry ; YES - retry copy | |
| 994 endm ; NO - done | |
| 995 | |
| 996 SMOVSS macro from, to ; isr-Safe MOVe Six byte integer to integer (version of MOVII for integers updated in ISR) | |
| 997 local retry ; | |
| 998 retry: | |
| 999 bcf trigger_isr_updates ; clear flag, it will be set by the ISR in case it had kicked in | |
| 1000 movff from+0,to+0 ; copy byte 0 (LSB) | |
| 1001 movff from+1,to+1 ; copy byte 1 | |
| 1002 movff from+2,to+2 ; copy byte 2 | |
| 1003 movff from+3,to+3 ; copy byte 3 | |
| 1004 movff from+4,to+4 ; copy byte 4 | |
| 1005 movff from+5,to+5 ; copy byte 5 (MSB) | |
| 1006 btfsc trigger_isr_updates ; did the ISR kicked in since we cleared the flag? | |
| 1007 bra retry ; YES - retry copy | |
| 1008 endm ; NO - done | |
| 1009 | |
| 582 | 1010 |
| 634 | 1011 ;----------------------------------------------------------------------------- |
| 1012 ; C-Code Routines | |
| 1013 ;----------------------------------------------------------------------------- | |
| 582 | 1014 |
| 1015 extern deco_calc_desaturation_time | |
| 1016 extern deco_calc_hauptroutine | |
| 604 | 1017 extern deco_calc_dive_interval |
| 582 | 1018 extern deco_calc_dive_interval_1min |
| 1019 extern deco_calc_dive_interval_10min | |
| 1020 extern deco_clear_tissue | |
| 623 | 1021 extern deco_init_output_vars |
| 582 | 1022 extern deco_pull_tissues_from_vault |
| 1023 extern deco_push_tissues_to_vault | |
| 560 | 1024 |
| 1025 | |
| 634 | 1026 ;----------------------------------------------------------------------------- |
| 1027 ; Bank0 ACCESS RAM | |
| 1028 ;----------------------------------------------------------------------------- | |
| 623 | 1029 |
| 1030 ; Variables located in the Access Bank are declared in hwos.asm | |
| 1031 | |
| 634 | 1032 ifndef INSIDE_HWOS_ASM |
| 623 | 1033 |
| 1034 extern HW_descriptor | |
| 1035 extern HW_variants | |
| 646 | 1036 extern HW_variants2 |
| 623 | 1037 |
| 628 | 1038 extern HW_flags_state1 |
| 1039 extern HW_flags_state2 | |
| 646 | 1040 extern HW_flags_state3 |
| 623 | 1041 |
| 1042 extern OS_flags_persist | |
| 1043 extern OS_flags_ISR1 | |
| 1044 extern OS_flags_ISR2 | |
| 1045 | |
| 1046 extern OM_flags_mode | |
| 1047 | |
| 1048 extern DM_flags_deco | |
| 1049 | |
| 1050 extern cpu_speed_request | |
| 1051 extern cpu_speed_state | |
| 1052 | |
| 1053 extern timebase | |
| 1054 extern eventbase | |
| 604 | 1055 |
| 623 | 1056 extern isr_timeout_timer |
| 1057 extern isr_timeout_reload | |
| 1058 | |
| 1059 extern total_divetime_secs | |
| 1060 extern counted_divetime_mins | |
| 1061 extern counted_divetime_secs | |
| 1062 | |
| 1063 extern apnoe_surface_secs | |
| 1064 extern apnoe_surface_mins | |
| 1065 extern apnoe_dive_secs | |
| 1066 extern apnoe_dive_mins | |
| 1067 | |
| 1068 extern sampling_rate | |
| 1069 extern sampling_timer | |
| 1070 | |
| 1071 extern simulatormode_depth | |
| 1072 | |
| 1073 extern hud_status_byte | |
| 1074 extern hud_battery_mv | |
| 1075 | |
| 634 | 1076 extern battery_capacity_internal |
| 1077 extern battery_capacity | |
| 1078 extern battery_offset | |
| 1079 extern battery_type | |
| 1080 extern battery_accumulated_charge | |
| 1081 extern battery_temperature | |
| 1082 extern gauge_status_byte | |
| 1083 | |
| 631 | 1084 endif ; ACCESS_RAM_VARS |
| 623 | 1085 |
| 634 | 1086 ;----------------------------------------------------------------------------- |
| 1087 ; Bank0 NORMAL RAM | |
| 1088 ;----------------------------------------------------------------------------- | |
| 1089 | |
| 623 | 1090 isr_backup equ 0x060 ; Alias for "banksel isr_backup" |
| 1091 isr_backup udata_ovr isr_backup ; Bank 0 ISR data | |
| 604 | 1092 |
| 631 | 1093 ;---- Backup for general Registers, used by ISR Routines |
| 623 | 1094 PROD_backup res 2 |
| 1095 FSR0_backup res 2 | |
| 1096 BSR_backup res 1 | |
| 1097 | |
| 631 | 1098 ;---- Multi-Purpose Registers, used by ISR Routines |
| 623 | 1099 isr_mpr res 2 ; used in ms5541.asm and isr.asm |
| 631 | 1100 #DEFINE isr_lo isr_mpr+0 ; ... |
| 1101 #DEFINE isr_hi isr_mpr+1 ; ... | |
| 1102 | |
| 1103 ;---- Multi-Purpose Registers, NOT USED by ISR Routines | |
| 1104 backup_mpr res 2 ; used in rtc.asm | |
| 1105 #DEFINE backup_lo backup_mpr+0 | |
| 1106 #DEFINE backup_hi backup_mpr+1 | |
| 1107 | |
| 623 | 1108 |
| 1109 ;---- Time and Date - Real Time Clock | |
| 1110 rtc_year res 1 ; running year | Attention: | |
| 1111 rtc_month res 1 ; running month | do not change | |
| 1112 rtc_day res 1 ; running day | the Position of | |
| 1113 rtc_hour res 1 ; running hour | these Variables | |
| 1114 rtc_mins res 1 ; running minute | relative to | |
| 1115 rtc_secs res 1 ; running second | each other! | |
| 582 | 1116 |
| 623 | 1117 rtc_latched_year res 1 ; latched year | Attention: |
| 1118 rtc_latched_month res 1 ; latched month | do not change | |
| 1119 rtc_latched_day res 1 ; latched day | the Position of | |
| 1120 rtc_latched_hour res 1 ; latched hour | these Variables | |
| 1121 rtc_latched_mins res 1 ; latched minute | relative to | |
| 1122 rtc_latched_secs res 1 ; latched second | each other! | |
| 1123 | |
| 1124 ;--- RTC-independent Timebase | |
| 1125 timebase_mins res 1 ; RTC-independent timer for generating the every hour trigger | |
| 1126 timebase_secs res 1 ; RTC-independent timer for generating the every minute trigger | |
| 1127 | |
| 1128 ;---- other Timers | |
| 1129 uptime res 4 ; [sec] uptime of the OSTC since last cold start | |
| 629 | 1130 surface_interval_secs res 4 ; [sec] surface interval counted in seconds |
| 1131 surface_interval_mins res 2 ; [min] surface interval counted in minutes | |
| 623 | 1132 simulator_time res 1 ; [min] real runtime of the simulator |
| 1133 | |
| 1134 ;---- Data for Pressure and Temperature Calculation (MS5541) | |
| 1135 clock_count res 1 ; I2C clock pulse counter | |
| 1136 sensor_state_counter res 1 ; counter for pressure sensor state machine | |
| 1137 dLSB res 1 ; pressure sensor interface, LSB | |
| 1138 dMSB res 1 ; pressure sensor interface, MSB | |
| 1139 dbuffer res 1 ; pressure sensor interface, RX/TX buffer | |
| 582 | 1140 |
| 646 | 1141 C1 res 2 ; decoded calibration data |
| 1142 C2 res 2 ; decoded calibration data | |
| 1143 C3 res 2 ; decoded calibration data | |
| 1144 C4 res 2 ; decoded calibration data, here C4-250 | |
| 1145 C5 res 2 ; decoded calibration data, here reference temperature UT1 = 8*C5 + 10000 (u16 range 10.000 .. +42.760) | |
| 1146 C6 res 2 ; decoded calibration data | |
| 1147 D1 res 3 ; raw pressure | |
| 1148 D2 res 3 ; raw temperature | |
| 1149 xdT res 3 | |
| 582 | 1150 xdT2 res 2 |
| 646 | 1151 OFF res 4 |
| 1152 SENS res 4 | |
| 623 | 1153 |
| 1154 temperature_cur res 2 ; current temperature | |
| 1155 temperature_min res 2 ; minimum temperature (operated by divemode.asm) | |
| 1156 temperature_avg res 2 ; internal register used for averaging | |
| 1157 temperature_last res 2 ; internal register used for detecting changes | |
| 1158 | |
| 1159 pressure_abs res 2 ; current absolute pressure | |
| 646 | 1160 pressure_abs_avg res 3 ; internal register used for averaging |
| 623 | 1161 pressure_abs_last res 2 ; internal register used for detecting pressure changes |
| 1162 | |
| 1163 pressure_abs_sampled res 2 ; sampled surface pressure, sampled in sleep mode every 15 minutes | |
| 1164 pressure_abs_ref res 2 ; reference surface pressure, surface pressure sampled 15 minutes ago | |
| 1165 pressure_surf res 2 ; surface pressure used by ISR to calculate relative pressures | |
| 1166 | |
| 1167 pressure_rel_cur res 2 ; current relative pressure | |
| 1168 pressure_rel_max res 2 ; maximum relative pressure | |
| 1169 pressure_rel_sim res 2 ; simulated relative pressure (simulator mode) | |
| 582 | 1170 |
| 604 | 1171 ;---- Data for ISR Math Subroutines |
| 646 | 1172 isr_xA res 4 ; multiplicand 1 |
| 1173 isr_xB res 3 ; multiplicand 2 | |
| 1174 isr_xC res 7 ; resulting product | |
| 1175 isr_math_loop res 1 ; loop counter | |
| 582 | 1176 |
| 604 | 1177 ;---- Display Brightness |
| 623 | 1178 ambient_light res 2 ; ambient light level |
| 604 | 1179 max_CCPR1L res 1 ; max. brightness value for CCPR1L |
| 582 | 1180 |
| 604 | 1181 ;---- Battery Gauge (nAs, nC) |
| 1182 battery_gauge res 6 ; 48 bit -> 78 Ah max | |
| 582 | 1183 |
| 604 | 1184 ;---- IR/S8-Link |
| 623 | 1185 ir_s8_buffer res .18 ; buffer for data received on IR/S8 interface, |
| 1186 ; also used to buffer MS5541 raw calibration data | |
| 1187 | |
| 1188 IFDEF _external_sensor | |
| 582 | 1189 ir_s8_counter res 1 |
| 604 | 1190 ir_s8_timeout res 1 ; timeout for valid data |
| 623 | 1191 ENDIF |
| 582 | 1192 |
| 623 | 1193 ;---- raw O2 Sensor Data received on S8 Link |
| 1194 IFDEF _external_sensor | |
| 1195 s8_rawdata_sensor1 res 3 ; 24 bit A/D raw data from S8 HUD sensor 1 | |
| 1196 s8_rawdata_sensor2 res 3 ; 24 bit A/D raw data from S8 HUD sensor 2 | |
| 1197 s8_rawdata_sensor3 res 3 ; 24 bit A/D raw data from S8 HUD sensor 3 | |
| 1198 ENDIF | |
| 582 | 1199 |
| 623 | 1200 ;---- Switch Processing (8 byte, called by ISR and sleep mode) |
| 1201 analog_sw1_raw res 2 ; idle values (average) | |
| 1202 analog_sw2_raw res 2 ; idle values (average) | |
| 1203 analog_counter res 1 ; for averaging | |
| 1204 analog_sw1 res 1 ; analog value for switch 1 | |
| 1205 analog_sw2 res 1 ; analog value for switch 2 | |
| 1206 button_polarity res 1 ; 0xFF (both normal), 0x00 (both inverted), 0x01 (left inverted only), 0x02 (right inverted only) | |
| 582 | 1207 |
| 631 | 1208 |
| 623 | 1209 ;--- resettable min and max Depth Option |
| 1210 IFDEF _min_depth_option | |
| 1211 pressure_rel_min_trip res 2 ; resettable minimum relative pressure | |
| 1212 pressure_rel_max_trip res 2 ; resettable maximum relative pressure | |
| 1213 ENDIF | |
| 640 | 1214 |
| 1215 debounce_counter res 1 ; multiples of 16ms | |
| 646 | 1216 isr_tmr7_helper res 1 ; used for 1/4 second trigger |
| 1217 | |
| 1218 ; 158 byte used, 2 byte free | |
| 560 | 1219 |
| 634 | 1220 |
| 1221 ;----------------------------------------------------------------------------- | |
| 1222 ; Common DATA | |
| 1223 ;----------------------------------------------------------------------------- | |
| 1224 | |
| 623 | 1225 common equ 0x100 ; Alias for "banksel common" |
| 1226 common udata_ovr common ; Bank 1 general variables | |
| 582 | 1227 |
| 623 | 1228 ;---- Multi-Purpose Register for Data Storage and Interface with Conversion and Display Functions (6 byte) |
| 1229 mpr res 6 ; will be used as base address of 1, 2, 3, 4 and 6 byte buffers | |
| 1230 #DEFINE lo mpr+0 ; nickname for "low" | |
| 1231 #DEFINE hi mpr+1 ; nickname for "high" | |
| 1232 #DEFINE up mpr+2 ; nickname for "upper" | |
| 1233 #DEFINE ex mpr+3 ; nickname for "extra" | |
| 1234 #DEFINE ul mpr+4 ; nickname for "ultra" | |
| 1235 #DEFINE hy mpr+5 ; nickname for "hyper" | |
| 1236 | |
| 582 | 1237 |
| 623 | 1238 ;---- Flags - Menu System (2 byte) |
| 1239 MS_flags_control res 1 ; menu system - control | |
| 1240 MS_flags_imprint res 1 ; menu system - data imprinting | |
| 582 | 1241 |
| 634 | 1242 ;---- Flags - Dive Mode (21 byte) |
| 623 | 1243 DM_flags_state res 1 ; dive mode - dive states |
| 1244 DM_flags_sensor res 1 ; dive mode - O2 sensors | |
| 631 | 1245 DM_flags_request res 1 ; dive mode - user requests / general |
| 623 | 1246 DM_flags_event res 1 ; dive mode - data recording events |
| 1247 DM_flags_layout1 res 1 ; dive mode - display control / layout (1) | |
| 1248 DM_flags_layout2 res 1 ; dive mode - display control / layout (2) | |
| 631 | 1249 DM_flags_layout3 res 1 ; dive mode - display control / layout (3) |
| 623 | 1250 DM_flags_message res 1 ; dive mode - display control / messages |
| 1251 DM_flags_gas_dil res 1 ; dive mode - display control / gas, diluent | |
| 634 | 1252 DM_flags_advc_det res 1 ; dive mode - advices detected |
| 1253 DM_flags_advc_ack res 1 ; dive mode - advices acknowledged | |
| 1254 DM_flags_att1_det res 1 ; dive mode - attentions detected (1) | |
| 1255 DM_flags_att2_det res 1 ; dive mode - attentions detected (2) | |
| 1256 DM_flags_att3_det res 1 ; dive mode - attentions detected (3) | |
| 1257 DM_flags_att1_ack res 1 ; dive mode - attentions acknowledged (1) | |
| 1258 DM_flags_att2_ack res 1 ; dive mode - attentions acknowledged (2) | |
| 1259 DM_flags_att3_ack res 1 ; dive mode - attentions acknowledged (3) | |
| 1260 DM_flags_war1_det res 1 ; dive mode - warnings detected (1) | |
| 1261 DM_flags_war2_det res 1 ; dive mode - warnings detected (2) | |
| 1262 DM_flags_war1_ack res 1 ; dive mode - warnings acknowledged (1) | |
| 1263 DM_flags_war2_ack res 1 ; dive mode - warnings acknowledged (2) | |
| 1264 DM_flags_shown1 res 1 ; dive mode - custom views shown (1) | |
| 1265 DM_flags_shown2 res 1 ; dive mode - custom views shown (2) | |
| 1266 DM_flags_shown3 res 1 ; dive mode - custom views shown (3) | |
| 623 | 1267 |
| 1268 ;---- Miscellaneous Flags (1 byte) | |
| 1269 misc_flags res 1 | |
| 1270 | |
| 634 | 1271 ;---- Interface to Graphic Functions (11 byte) |
| 582 | 1272 win_leftx2 res 1 |
| 1273 win_top res 1 | |
| 1274 win_width res 2 | |
| 1275 win_height res 1 | |
| 623 | 1276 win_bargraph res 1 ; width of the bargraph bar |
| 1277 win_color1 res 1 ; 2 byte color | |
| 1278 win_color2 res 1 ; 2 byte color | |
| 1279 win_color3 res 1 ; 3 byte color used for display 2 | |
| 1280 win_color4 res 1 ; 3 byte color used for display 2 | |
| 1281 win_color5 res 1 ; 3 byte color used for display 2 | |
| 560 | 1282 |
| 623 | 1283 ;---- Interface to Math Functions (16 byte) |
| 582 | 1284 divA res 2 |
| 1285 xA res 2 | |
| 1286 xB res 2 | |
| 623 | 1287 xC res 4 |
| 582 | 1288 sub_a res 2 |
| 1289 sub_b res 2 | |
| 623 | 1290 sub_c res 2 |
| 582 | 1291 |
| 631 | 1292 ;---- Menu System and Views (5 byte) |
| 623 | 1293 menu_pos_cur res 1 ; current position in main menu |
| 1294 menu_pos_max res 1 ; highest position in main menu | |
| 1295 active_premenu res 1 ; currently shown pre-menu (0: none) | |
| 631 | 1296 active_customview res 1 ; currently shown custom view |
| 1297 backup_customview res 1 ; previously shown custom view | |
| 623 | 1298 |
| 1299 ;---- Miscellaneous (6 byte) | |
| 1300 batt_voltage res 2 ; battery voltage in mV (no ISR involved) | |
| 1301 batt_percent res 1 ; battery in percent (1-100%) | |
| 604 | 1302 message_counter res 1 ; counts amount of messages |
| 623 | 1303 message_page res 1 ; current message page number |
| 604 | 1304 pairing_slot res 1 ; slot number, used in transmitter pairing |
| 1305 | |
| 634 | 1306 |
| 631 | 1307 ;---- Dive Mode / all modes (26 byte) |
| 623 | 1308 divesecs_avg_trip res 2 ; time accumulator for the resettable average depth & stopwatch |
| 1309 divesecs_avg_total res 2 ; time accumulator for the total dive average depth | |
| 1310 pressure_rel_avg_trip res 2 ; calculated resettable average depth | |
| 1311 pressure_rel_avg_total res 2 ; calculated total dive average depth | |
| 1312 pressure_rel_cur_cached res 2 ; cached current relative pressure | |
| 1313 pressure_rel_max_cached res 2 ; cached maximum relative pressure | |
| 1314 pressure_abs_cached res 2 ; cached current absolute pressure | |
| 1315 pressure_abs_10 res 2 ; cached current absolute pressure divided by 10 | |
| 1316 depth_meter res 1 ; current depth in meters | |
| 1317 safety_stop_countdown res 1 ; counter for safety stop | |
| 1318 dive_timeout_timer res 2 ; timeout timer for leaving dive mode after surfacing | |
| 582 | 1319 gaslist_gas res 1 ; used for transfer between gaslist.asm and menu_tree.asm |
| 604 | 1320 best_gas_number res 1 ; number of the "best gas": 0= none found, 1-5= gases 1-5, 255= not computed |
| 623 | 1321 active_gas res 1 ; the currently used OC/bailout gas (1-5) |
| 640 | 1322 dive_ccr_mode res 1 ; working copy of opt_ccr_mode while the dive |
| 646 | 1323 dive_threshold_debounce res 1 ; Countdown for entering dive mode |
| 1324 | |
| 623 | 1325 IFDEF _ccr_pscr |
| 604 | 1326 best_dil_number res 1 ; number of the "best dil": 0= none found, 1-5= dils 1-5, 255= not computed |
| 1327 active_dil res 1 ; the currently used diluent (1-5) | |
| 623 | 1328 ENDIF |
| 1329 | |
| 631 | 1330 IFDEF _cave_mode |
| 1331 DM_flags_cavereq res 1 ; dive mode - user requests / cave mode | |
| 1332 backtrack_deltatime res 1 ; time elapsed since last depth recording in seconds | |
| 1333 backtrack_waypoint_num res 1 ; current waypoint number | |
| 1334 backtrack_waypoint_turn res 1 ; waypoint number of the turn point | |
| 1335 ENDIF | |
| 1336 | |
| 623 | 1337 ;---- Dive Mode / apnoe mode (2 byte) |
| 1338 apnoe_max_pressure res 2 ; max depth over all dives in the series | |
| 560 | 1339 |
| 623 | 1340 ;---- Profile Recording (6 byte) |
| 634 | 1341 alarm_type res 1 ; alarm states recording |
| 1342 event_byte1 res 1 ; events recording | |
| 1343 event_byte2 res 1 ; events recording | |
| 623 | 1344 CNS_start res 2 ; CNS value at beginning of dive |
| 560 | 1345 |
| 631 | 1346 ;---- External Flash (14 byte) |
| 582 | 1347 ext_flash_address res 3 ; 24 bit address |
| 631 | 1348 ext_flash_length_counter res 3 ; 24 bit length counter |
| 582 | 1349 ext_flash_log_pointer res 3 ; 24 bit address for logbook profile storing |
| 1350 ext_flash_end_pointer res 3 ; 24 bit address for logbook profile storing | |
| 631 | 1351 ext_flash_rw res 1 ; transfer register for data read / write |
| 634 | 1352 ext_flash_address_limit res 1 ; wrap-around threshold while address incrementing |
| 560 | 1353 |
| 1354 | |
| 634 | 1355 ;------------------------------------------------------------------------------- |
| 1356 ; private Variables - do not access from outside of the respective source files! | |
| 1357 ;------------------------------------------------------------------------------- | |
| 560 | 1358 |
| 634 | 1359 ;---- aa_wordprocessor.asm, strings.asm & Co. |
| 623 | 1360 AA_flags res 1 ; various flags for aa_wordprocessor and strings |
| 582 | 1361 aa_bitlen res 1 ; count of pixels when decoding bitmaps |
| 623 | 1362 aa_start res 2 ; PROM pointer to start of encoded bitmap |
| 582 | 1363 aa_end res 2 ; and end of it |
| 1364 aa_temp res 2 ; current color, divided by 2 or 4 | |
| 634 | 1365 font_color res 1 ; selected font color |
| 1366 font_size res 1 ; selected font size | |
| 1367 pallet_color_mask res 1 ; pallet color - mask | Attention: | |
| 1368 pallet_color_disabled res 1 ; pallet color - disabled | do not change | |
| 1369 pallet_color_memo res 1 ; pallet color - memo | the relative | |
| 1370 pallet_color_advice res 1 ; pallet color - advice | position of | |
| 1371 pallet_color_attention res 1 ; pallet color - attention | these vars! | |
| 1372 pallet_color_warning res 1 ; pallet color - warning | | |
| 1373 | |
| 582 | 1374 |
| 1375 ;--- adc_lightsensor.asm | |
| 623 | 1376 get_bat_volt_counter res 1 ; counter for reading the charger chip |
| 582 | 1377 |
| 1378 ;---- convert.asm | |
| 623 | 1379 CVT_flags1 res 1 |
| 1380 CVT_flags2 res 1 | |
| 634 | 1381 bcd_lo res 1 |
| 1382 bcd_hi res 1 | |
| 1383 bcd_up res 1 | |
| 1384 bin_lo res 1 | |
| 1385 bin_hi res 1 | |
| 582 | 1386 |
| 1387 ;---- color_processor.asm | |
| 623 | 1388 overall_pixels res 3 ; used by color_processor.asm |
| 1389 pixel_count res 2 ; used by color_processor.asm | |
| 1390 encoding_format res 1 ; image encoding format | |
| 1391 | |
| 1392 ;---- compass_ops.asm | |
| 1393 compass_flags res 1 ; flags are defined in compass_ops.asm | |
| 582 | 1394 |
| 1395 ;---- comm.asm | |
| 623 | 1396 comm_timeout_timer res 1 ; timeout for communication |
| 582 | 1397 |
| 1398 ;---- eeprom_rs232.asm | |
| 631 | 1399 eeprom_loop res 1 ; loop counter (actually used in flash and serial, too) |
| 634 | 1400 rx_timeout_tmr5h_load res 1 ; TMR5H load value for RS232 RX timeout |
| 582 | 1401 |
| 1402 ;---- i2c.asm | |
| 1403 i2c_temp1 res 1 ; temporary data | |
| 1404 i2c_temp2 res 1 ; temporary data | |
| 1405 | |
| 623 | 1406 ;---- math.asm |
| 1407 math_loop res 1 ; loop counter | |
| 1408 | |
| 582 | 1409 ;---- menu_processor.asm |
| 623 | 1410 menustack_pointer res 1 ; pointer to menu stack |
| 634 | 1411 menu_item_start res 1 ; index of the first menu item (scrolling) |
| 1412 menu_item_curr res 1 ; index of the current menu item (loop counter) | |
| 1413 menu_item_count res 1 ; total number of menu items | |
| 582 | 1414 selected_item res 1 ; index of the current item |
| 634 | 1415 menu_title_addr res 2 ; address of the multi-lingual menu titel |
| 1416 menu_item_data_start res 3 ; base address of the menu item data blocks | |
| 1417 menu_vertical_start res 1 ; vertical start position of 1st menu item | |
| 1418 item_type res 1 ; type of the menu item | |
| 1419 item_title_addr res 2 ; address of item title function or title text | |
| 1420 item_funct_addr res 2 ; address of item call function or option definition data | |
| 1421 | |
| 582 | 1422 |
| 1423 ;---- options.asm | |
| 634 | 1424 #DEFINE opt_definition_bytes .12 ; | Attention: do not change the relative position of these vars! |
| 631 | 1425 opt_type res 1 ; | option type |
| 1426 opt_serial res 1 ; | index used for option read/write via RS232 | |
| 634 | 1427 opt_inc res 1 ; | increment value, also used for enum low and low (pointer to default string) |
| 1428 opt_min res 1 ; | minimum value, also used for enum high and high(pointer to default string) | |
| 1429 opt_max res 1 ; | maximum value, also used for length( default string) | |
| 631 | 1430 opt_default res 1 ; | default value |
| 1431 opt_unit res 2 ; | pointer to multi-lingual unit text | |
| 1432 opt_memory res 2 ; | pointer to memory position | |
| 1433 opt_eeprom_index res 1 ; | pointer to EEPROM position (index) | |
| 1434 opt_eeprom_bank res 1 ; | pointer to EEPROM position (bank) | |
| 1435 opt_end_token res 1 ; | =0xFF: end of table reached (does not count into opt_definiton_bytes) | |
| 1436 | |
| 582 | 1437 |
| 1438 ;---- tft.asm | |
| 623 | 1439 tft_save_top res 1 |
| 1440 tft_save_height res 1 | |
| 1441 tft_save_left res 1 | |
| 1442 tft_save_width res 1 | |
| 582 | 1443 tft_temp1 res 1 |
| 1444 tft_temp2 res 1 | |
| 1445 tft_temp3 res 1 | |
| 1446 tft_temp4 res 1 | |
| 1447 | |
| 623 | 1448 ;---- dump screen Function |
| 604 | 1449 IFDEF _screendump |
| 623 | 1450 ds_line res 1 ; current line (0..239) |
| 1451 ds_column res 1 ; current columnx2 (0..159) | |
| 1452 ds_pixel res 2 ; current pixel color | |
| 1453 ds_count res 1 ; repetition count | |
| 604 | 1454 ENDIF |
| 1455 | |
| 582 | 1456 ;---- wait.asm |
| 1457 wait_counter res 1 | |
| 1458 | |
| 634 | 1459 ;---- tft_outputs.asm |
| 1460 pressure_update_lag_counter res 1 ; lag time counter for fast surface pressure display updating | |
| 623 | 1461 |
| 634 | 1462 |
| 640 | 1463 ; 201 byte used, 7 byte free (208 byte total) |
| 582 | 1464 |
| 1465 | |
| 634 | 1466 ;----------------------------------------------------------------------------- |
| 1467 ; LOCAL DATA | |
| 1468 ;----------------------------------------------------------------------------- | |
| 1469 | |
| 582 | 1470 ; Space for various overlayed local data from top-level applications, |
| 1471 ; i.e. applications that never run in parallel to each other | |
| 634 | 1472 |
| 582 | 1473 ; --------------------- local Data Users -------------------------------------- |
| 623 | 1474 ; |
| 1475 ; -------------- Applications using ---------------------- | |
| 582 | 1476 ; Mode local1 local2 local3 |
| 634 | 1477 ; -------------------------------------------------------------------------- |
| 582 | 1478 ; sleepmode sleepmode.asm (unused) (unused) |
| 1479 ; surfmode surfmode.asm* (unused) (unused) | |
| 628 | 1480 ; simulator divemode.asm divemode.asm simulator.asm |
| 604 | 1481 ; divemode divemode.asm divemode.asm ghostwriter.asm |
| 623 | 1482 ; logbook logbook.asm logbook.asm logbook.asm |
| 582 | 1483 ; |
| 1484 ; * assigned to this slot, but currently no local memory used | |
| 1485 | |
| 1486 local1 equ 0x1D0 ; Alias for CBLOCK directive | |
| 1487 local1 udata_ovr 0x1D0 ; Bank1 shared local space | |
| 1488 res 0x10 ; 16 Byte (0x1D0 ... 0x1DF) | |
| 1489 | |
| 1490 local2 equ 0x1E0 ; Alias for CBLOCK directive | |
| 1491 local2 udata_ovr 0x1E0 ; Bank1 shared local space | |
| 1492 res 0x10 ; 16 Byte (0x1E0 ... 0x1EF) | |
| 1493 | |
| 1494 local3 equ 0x1F0 ; Alias for CBLOCK directive | |
| 1495 local3 udata_ovr 0x1F0 ; Bank1 shared local space | |
| 1496 res 0x10 ; 16 Byte (0x1F0 ... 0x1FF) | |
| 1497 | |
| 1498 | |
| 634 | 1499 ;----------------------------------------------------------------------------- |
| 1500 ; Common2 DATA | |
| 1501 ;----------------------------------------------------------------------------- | |
| 1502 | |
| 623 | 1503 common2 equ 0xA00 ; Alias for "banksel common2" |
| 1504 common2 udata_ovr common2 ; Bank 10 general variables | |
| 582 | 1505 |
| 623 | 1506 ;---- Data for Logging (6 byte), sampled in divemode.asm and used in ghostwriter.asm |
| 1507 start_year res 1 ; year | ATTENTION: | |
| 1508 start_month res 1 ; month | do not change the | |
| 1509 start_day res 1 ; day | position of these | |
| 1510 start_hour res 1 ; hour | variables relative | |
| 1511 start_mins res 1 ; minute | to each other! | |
| 1512 start_secs res 1 ; second, not used, for code commonality | | |
| 582 | 1513 |
| 623 | 1514 supersat_start res 1 ; leading tissue supersaturation at beginning of the dive |
| 1515 | |
| 1516 ;---- O2 Sensors (9 byte, updated by ISR when sensors are connected via datalink) | |
| 1517 IFDEF _external_sensor | |
| 1518 sensor1_mv res 2 ; sensor 1 voltage in 0.1 mV steps | |
| 1519 sensor2_mv res 2 ; sensor 2 voltage in 0.1 mV steps | |
| 1520 sensor3_mv res 2 ; sensor 3 voltage in 0.1 mV steps | |
| 1521 sensor1_ppO2 res 1 ; sensor 1 ppO2 in 0.01 bar steps | |
| 1522 sensor2_ppO2 res 1 ; sensor 2 ppO2 in 0.01 bar steps | |
| 1523 sensor3_ppO2 res 1 ; sensor 3 ppO2 in 0.01 bar steps | |
| 1524 ENDIF | |
| 582 | 1525 |
| 623 | 1526 ;---- last Dive Statistics (7 byte) |
| 1527 lastdive_duration res 3 ; byte 0= minutes, low byte, 1= minutes, high byte, 2= seconds | |
| 1528 lastdive_maxdepth res 2 ; in mbar | |
| 1529 lastdive_avgdepth res 2 ; in mbar | |
| 582 | 1530 |
| 623 | 1531 ;---- Backup of last shown Custom View (2 byte) |
| 582 | 1532 customview_surfmode res 1 ; storage to remember last selected custom view in surface mode |
| 1533 customview_divemode res 1 ; storage to remember last selected custom view in dive mode | |
| 1534 | |
| 623 | 1535 ;---- Miscellaneous (0 byte) |
| 1536 ;old_velocity res 4 ; stores the last 4 speeds (8 seconds) in m/min | |
| 1537 | |
| 1538 ;---- Menu Processor (8 byte) | |
| 1539 menustack res 8 ; menu stack | |
| 582 | 1540 |
| 628 | 1541 ;---- Graphical Compass (15 byte) |
| 623 | 1542 xRD res 2 ; virtual compass ruler offset |
| 1543 xRDr res 2 ; virtual compass ruler offset - right end | |
| 1544 xRD180 res 2 ; virtual compass ruler offset for the -180 marker | |
| 1545 xLO res 1 ; lo backup to prevent trashing | |
| 1546 xHI res 1 ; hi backup to prevent trashing | |
| 1547 xCM res 1 ; compass bearing relative position | |
| 1548 compass_heading_new res 2 ; corrected heading (in 1°) : -180 .. 180 | |
| 1549 compass_heading_shown res 2 ; displayed heading | |
| 1550 compass_bearing res 2 ; displayed bearing | |
| 582 | 1551 |
| 623 | 1552 ;---- Compass Arithmetics (30 byte) |
| 1553 compass_DX res 2 ; raw data | |
| 1554 compass_DY res 2 ; raw data | |
| 1555 compass_DZ res 2 ; raw data | |
| 1556 accel_DX res 2 ; raw data | |
| 1557 accel_DY res 2 ; raw data | |
| 1558 accel_DZ res 2 ; raw data | |
| 1559 compass_DX_f res 2 ; filtered Data | |
| 1560 compass_DY_f res 2 ; filtered Data | |
| 1561 compass_DZ_f res 2 ; filtered Data | |
| 1562 accel_DX_f res 2 ; filtered Data | |
| 1563 accel_DY_f res 2 ; filtered Data | |
| 1564 accel_DZ_f res 2 ; filtered Data | |
| 631 | 1565 compass_CX_f res 2 ; calibration data (stored via options system) |
| 1566 compass_CY_f res 2 ; calibration data (stored via options system) | |
| 1567 compass_CZ_f res 2 ; calibration data (stored via options system) | |
| 582 | 1568 |
| 623 | 1569 ;---- temporary Data for Q15 Arithmetics (7 byte, compass_ops.asm, called from C) |
| 1570 compass_a res 2 ; | |
| 1571 compass_b res 2 ; | |
| 1572 compass_r res 3 ; | |
| 1573 | |
| 1574 ;---- Data Exchange with TR Co-Processor (50 byte) | |
| 604 | 1575 IFDEF _rx_functions |
| 1576 rx_buffer res .48 ; Buffer for RX data (slots 0-7) | |
| 623 | 1577 rx_firmware_cur_major res 1 ; TR module current firmware, major |
| 1578 rx_firmware_cur_minor res 1 ; TR module current firmware, minor | |
| 1579 ENDIF | |
| 604 | 1580 |
| 628 | 1581 ;---- SAC Calculation on Pressure Readings 1 & 2 (22 byte) |
| 623 | 1582 IFDEF _rx_functions |
| 604 | 1583 pres_accu_1st res 4 ; accumulator for pressure drop in 1/160 bar | ATTENTION: do not |
| 1584 pres_accu_2nd res 4 ; accumulator for pressure drop in 1/160 bar | change the | |
| 628 | 1585 time_accu_1st res 2 ; accumulator for reading ages in seconds | position |
| 604 | 1586 gas__last_1st res 1 ; last gas assignment | of these |
| 628 | 1587 time_accu_2nd res 2 ; accumulator for reading ages in seconds | variables |
| 604 | 1588 gas__last_2nd res 1 ; last gas assignment | relative |
| 1589 pres_last_1st res 2 ; last pressure reading pressure in 1/160 bar | to each | |
| 1590 pres_last_2nd res 2 ; last pressure reading pressure in 1/160 bar | other! | |
| 1591 time_last_1st res 2 ; last pressure reading time in seconds | | |
| 1592 time_last_2nd res 2 ; last pressure reading time in seconds | | |
| 1593 ENDIF | |
| 1594 | |
| 646 | 1595 i2c_error_vault res 2 ; Store last used device ID and data byte |
| 1596 D1_buffer res 3 ; Buffer of D1 (Sensor raw data) | |
| 1597 D2_buffer res 3 ; Buffer of D2 (Sensor raw data) | |
| 1598 | |
| 1599 brightness res 1 ; =0: Eco, =1:Medium, =2:Full | |
| 1600 ; 157 byte used, 92 byte free | |
| 631 | 1601 |
| 1602 | |
| 634 | 1603 ;----------------------------------------------------------------------------- |
| 1604 ; Bank 2 General Purpose Buffer 1 | |
| 1605 ;----------------------------------------------------------------------------- | |
| 1606 | |
| 631 | 1607 ; NOTE: needs to be aligned with a bank (low(buffer)=0) |
| 1608 | |
| 1609 buffer udata_ovr 0x200 | |
| 1610 buffer res .256 ; buffer 1 - string buffer, etc. | |
| 582 | 1611 |
| 1612 | |
| 634 | 1613 ;----------------------------------------------------------------------------- |
| 1614 ; Bank 11 General Purpose Buffer 2 | |
| 1615 ;----------------------------------------------------------------------------- | |
| 1616 | |
| 1617 ; NOTE: needs to be aligned with a bank (low(buffer)=0) | |
| 631 | 1618 ; |
| 1619 ; Remark: this memory block is already allocated in shared_definitions.h for | |
| 1620 ; use while in dive mode, so we need to make a hard reference here | |
| 634 | 1621 |
| 631 | 1622 ;buffer2 udata_ovr 0xB00 |
| 1623 ;buffer2 res .256 ; buffer 2 - backtracking, flash mirror, etc. | |
| 582 | 1624 |
| 631 | 1625 #DEFINE buffer2 0xB00 |
| 582 | 1626 |
| 1627 | |
| 634 | 1628 ;----------------------------------------------------------------------------- |
| 1629 ; Bank 14 Options Table | |
| 1630 ;----------------------------------------------------------------------------- | |
| 1631 | |
| 623 | 1632 opt_table equ 0xE00 ; Alias for "banksel opt_table" |
| 1633 opt_table udata_ovr opt_table ; Bank 14 options table | |
| 582 | 1634 |
| 623 | 1635 ;---- Gas and Diluent Settings |
| 604 | 1636 opt_gas_O2_ratio res 5 ; O2 ratios of OC/bailout gases | ATTENTION: |
| 1637 opt_dil_O2_ratio res 5 ; O2 ratios of diluents | keep relative | |
| 1638 opt_gas_He_ratio res 5 ; He ratios of OC/bailout gases | positioning of | |
| 1639 opt_dil_He_ratio res 5 ; He ratios of diluents | all arrays in | |
| 1640 opt_gas_type res 5 ; OC/bailout gas type: O=Disabled, 1=First, 2=Travel, 3=Deco | this block! | |
| 1641 opt_dil_type res 5 ; dil type: 0=Disabled, 1=First, 2=Normal | | |
| 1642 opt_gas_change res 5 ; change depths for OC/Bailout gases | | |
| 1643 opt_dil_change res 5 ; change depths for diluents | | |
| 1644 | |
| 634 | 1645 ;---- Gas 6 Settings |
| 1646 opt_gas6_O2_ratio res 1 ; gas 6 O2 ratio | ATTENTION: keep relative positioning | |
| 1647 opt_gas6_He_ratio res 1 ; gas 6 He ratio | of these two variables! | |
| 1648 | |
| 1649 ;---- Setpoints Settings | |
| 623 | 1650 opt_setpoint_cbar res 5 ; setpoints in cbar | ATTENTION: keep relative positioning |
| 1651 opt_setpoint_change res 5 ; change depth for the setpoints in meter | of these two arrays! | |
| 582 | 1652 |
| 623 | 1653 ;---- Dive Mode Settings |
| 1654 opt_dive_mode res 1 ; main dive/deco mode: =0: OC, =1: CC, =2: Gauge, =3: Apnea, =4: pSCR | |
| 1655 opt_ccr_mode res 1 ; CCR/pSCR sub mode: =0: fixed/calculated SP, =1: Sensor, =2: Auto SP | |
| 1656 | |
| 1657 ;---- custom Text | |
| 1658 #DEFINE opt_name_length .60 ; custom text string 5 rows with 12 chars | |
| 1659 opt_name res opt_name_length | |
| 1660 | |
| 1661 ;---- various other Settings | |
| 631 | 1662 opt_fw_version_major res 1 ; firmware version, major | use read-only! |
| 1663 opt_fw_version_minor res 1 ; firmware version, minor | | |
| 1664 opt_fw_version_beta res 1 ; firmware version, beta | | |
| 623 | 1665 opt_surface_interval res 1 ; surface interval, used by deco calculator |
| 646 | 1666 opt_brightness_divemode res 1 ; =0: Eco, =1:Medium, =2:Full |
| 1667 opt_brightness_surface res 1 ; =0: Eco, =1:Medium, =2:Full | |
| 582 | 1668 opt_salinity res 1 ; 0-5% |
| 604 | 1669 opt_language res 1 ; current language: 0=EN, 1=DE, 2=FR, 3=SP |
| 582 | 1670 opt_units res 1 ; 0:m/°C, 1:ft/°F |
| 1671 opt_dateformat res 1 ; =0:MMDDYY, =1:DDMMYY, =2:YYMMDD | |
| 634 | 1672 opt_dive_color_scheme res 1 ; dive mode color scheme selection |
| 582 | 1673 opt_last_stop res 1 ; =3:3m, =4:4m, =5:5m, =6:6m |
| 604 | 1674 opt_aGF_high res 1 ; alternative GF HIGH |
| 1675 opt_aGF_low res 1 ; alternative GF LOW | |
| 582 | 1676 opt_GF_high res 1 ; GF HIGH |
| 1677 opt_GF_low res 1 ; GF LOW | |
| 1678 opt_enable_aGF res 1 ; =1: aGF can be selected underwater | |
| 1679 opt_compass_gain res 1 ; 0-7 (230LSB/Gauss to 1370LSB/Gaus) | |
| 1680 opt_sampling_rate res 1 ; =1: 10s, =0: 2s | |
| 1681 opt_pressure_adjust res 1 ; SIGNED char (two's complement), -20/+20mbar max. | |
| 631 | 1682 opt_safetystop res 1 ; =1: a safety stop is shown |
| 582 | 1683 opt_calibration_O2_ratio res 1 ; %O2 of calibration gas |
| 634 | 1684 opt_x_s1 res 2 ; calibration factor (not stored in EEPROM) | keep relative |
| 1685 opt_x_s2 res 2 ; calibration factor (not stored in EEPROM) | position! | |
| 1686 opt_x_s3 res 2 ; calibration factor (not stored in EEPROM) | | |
| 582 | 1687 opt_sensor_fallback res 1 ; NOT USED ANY MORE, KEPT FOR COMPATIBILITY WITH EEPROM IMAGE |
| 604 | 1688 opt_flip_screen res 1 ; =1: flip the screen |
| 623 | 1689 opt_cR_button_left res 1 ; left button sensitivity (cR hardware) |
| 604 | 1690 opt_cR_button_right res 1 ; right button sensitivity (cR hardware) |
| 631 | 1691 opt_depth_warn res 1 ; =1:do a red blinking warning, =0:default behavior |
| 1692 opt_vsitext res 1 ; =1:use the depth dependent ascend rate limits | |
| 582 | 1693 opt_vsigraph res 1 ; =1:draw the graphical VSI bar |
| 1694 opt_showppo2 res 1 ; =1:always show the ppO2 value in the warning position | |
| 1695 opt_temperature_adjust res 1 ; SIGNED char (two's complement), -2.0/+2.0 °C max. | |
| 1696 opt_safety_stop_length res 1 ; [s] | |
| 1697 opt_safety_stop_start res 1 ; [cbar] | |
| 1698 opt_safety_stop_end res 1 ; [cbar] | |
| 1699 opt_safety_stop_reset res 1 ; [cbar] | |
| 604 | 1700 opt_diveTimeout res 1 ; timeout for dive mode [min] |
| 582 | 1701 opt_sim_setpoint_number res 1 ; setpoint to use for deco calculation |
| 631 | 1702 opt_calc_gasvolume res 1 ; calculate OC gas volume needs for ascent |
| 582 | 1703 opt_sim_use_aGF res 1 ; =0: use GF, =1: use aGF for deco calculation |
| 1704 opt_enable_IBCD res 1 ; enable IBCD warning | |
| 1705 opt_sat_multiplier_gf res 1 ; Buhlmann safety factor for GF deco | |
| 1706 opt_desat_multiplier_gf res 1 ; Buhlmann safety factor for GF deco | |
| 1707 opt_sat_multiplier_non_gf res 1 ; Buhlmann safety factor for NON-GF deco | |
| 1708 opt_desat_multiplier_non_gf res 1 ; Buhlmann safety factor for NON-GF deco | |
| 604 | 1709 opt_2ndDepthDisp res 1 ; =1: show average depth instead of max depth |
| 623 | 1710 opt_max_depth res 1 ; depth at which a warning will be given |
| 631 | 1711 opt_store_apnoe res 1 ; =1: store dives in apnoe mode into logbook |
| 623 | 1712 opt_tissue_graphics res 1 ; =0: show N2 and He pressures, =1: show pressures and saturations |
| 1713 opt_logoffset_step res 1 ; step size when adjusting log offset | |
| 1714 opt_layout res 1 ; initial layout of dive mode screen | |
| 631 | 1715 opt_ext_stops res 1 ; =1: place gas switches also below 1st stop depth |
| 1716 opt_s8_mode res 1 ; S8 mode - analog / digital | |
| 1717 opt_gas_contingency_sim res 1 ; =1: deco calculator: switch to alternative gas if best gas is used up | |
| 1718 opt_gas_contingency_dive res 1 ; =1: real dive mode: switch to alternative gas if best gas is used up | |
| 1719 opt_cave_mode res 1 ; =1: cave mode switched on | |
| 634 | 1720 opt_gas_density_check res 1 ; =1: gas density is checked (effective in CCR / pSCR modes only) |
| 1721 opt_comm_timeout res 1 ; comm RX timeout in multiples of 10 ms | |
| 1722 opt_fallback res 1 ; unused dummy option for compatibility with 3rd party tools | |
| 1723 opt_conservatism res 1 ; unused dummy option for compatibility with 3rd party tools | |
| 604 | 1724 |
| 623 | 1725 ;---- RX Function Settings |
| 604 | 1726 opt_transmitter_id_1 res 2 ; 16 bit transmitter ID for Gas 1 |
| 1727 opt_transmitter_id_2 res 2 ; 16 bit transmitter ID for Gas 2 | |
| 1728 opt_transmitter_id_3 res 2 ; 16 bit transmitter ID for Gas 3 | |
| 1729 opt_transmitter_id_4 res 2 ; 16 bit transmitter ID for Gas 4 | |
| 1730 opt_transmitter_id_5 res 2 ; 16 bit transmitter ID for Gas 5 | |
| 1731 opt_transmitter_id_6 res 2 ; 16 bit transmitter ID for Dil 1 | |
| 1732 opt_transmitter_id_7 res 2 ; 16 bit transmitter ID for Dil 2 | |
| 1733 opt_transmitter_id_8 res 2 ; 16 bit transmitter ID for Dil 3 | |
| 1734 opt_transmitter_id_9 res 2 ; 16 bit transmitter ID for Dil 4 | |
| 1735 opt_transmitter_id_10 res 2 ; 16 bit transmitter ID for Dil 5 | |
| 1736 opt_TR_mode res 1 ; TR functions - mode | |
| 1737 opt_TR_1st_pres res 1 ; TR functions - 1st pressure assignment | |
| 1738 opt_TR_2nd_pres res 1 ; TR functions - 2nd pressure assignment | |
| 1739 opt_TR_Bail_pres res 1 ; TR functions - bailout pressure assignment | |
| 1740 | |
| 634 | 1741 ; ==> 193 bytes used - 51 bytes free (244 usable bytes only in bank 14 as the upper 12 |
| 631 | 1742 ; bytes are reserved for special function registers) |
| 582 | 1743 |
| 1744 ;----------------------------------------------------------------------------- |