Mercurial > public > hwos_code
annotate src/surfmode.asm @ 631:185ba2f91f59
3.09 beta 1 release
| author | heinrichsweikamp |
|---|---|
| date | Fri, 28 Feb 2020 15:45:07 +0100 |
| parents | 237931377539 |
| children | 4050675965ea |
| rev | line source |
|---|---|
| 0 | 1 ;============================================================================= |
| 2 ; | |
| 631 | 3 ; File surfmode.asm next combined generation V3.08.8 |
| 0 | 4 ; |
| 623 | 5 ; Surface Mode |
| 0 | 6 ; |
| 7 ; Copyright (c) 2011, JD Gascuel, HeinrichsWeikamp, all right reserved. | |
| 8 ;============================================================================= | |
| 9 ; HISTORY | |
| 582 | 10 ; 2011-08-07 : [mH] moving from OSTC code |
| 0 | 11 |
| 582 | 12 #include "hwos.inc" ; Mandatory header |
| 13 #include "shared_definitions.h" ; Mailbox from/to p2_deco.c | |
| 14 #include "start.inc" | |
| 15 #include "tft.inc" | |
| 16 #include "tft_outputs.inc" | |
| 17 #include "adc_lightsensor.inc" | |
| 18 #include "menu_processor.inc" | |
| 19 #include "strings.inc" | |
| 20 #include "sleepmode.inc" | |
| 623 | 21 #include "wait.inc" |
| 582 | 22 #include "external_flash.inc" |
| 23 #include "customview.inc" | |
| 24 #include "divemode.inc" | |
| 25 #include "mcp.inc" ; RX | |
| 26 #include "i2c.inc" | |
| 27 #include "comm.inc" | |
| 28 #include "eeprom_rs232.inc" | |
| 29 #include "calibrate.inc" | |
| 623 | 30 #include "rx_ops.inc" |
| 0 | 31 |
| 604 | 32 |
| 582 | 33 extern do_main_menu |
| 604 | 34 extern check_cns_violation |
| 35 extern check_warn_battery | |
| 623 | 36 extern check_and_store_sat_violation |
| 604 | 37 extern check_mbubbles |
| 38 | |
| 39 IFDEF _osct_logo | |
| 40 extern ostc_logo_block | |
| 41 ENDIF | |
| 582 | 42 |
| 623 | 43 IFDEF _compass |
| 44 extern TFT_surface_compass_heading | |
| 45 ENDIF | |
| 582 | 46 |
| 213 | 47 |
| 623 | 48 ;---- Private local variables ------------------------------------------------ |
| 49 | |
| 50 CBLOCK local1 ; max size is 16 byte !!! | |
| 604 | 51 ; currently not used |
| 52 ENDC ; used: 0 byte, remaining: 16 byte | |
| 582 | 53 |
| 0 | 54 |
| 582 | 55 #DEFINE menu_pos_row .215 |
| 56 #DEFINE menu_pos_column .1 | |
| 57 #DEFINE view_row .215 | |
| 58 #DEFINE view_column .124 | |
| 0 | 59 |
| 623 | 60 |
| 61 sfmode CODE | |
| 0 | 62 |
| 63 ;============================================================================= | |
| 64 ; Boot tasks for all modes | |
| 623 | 65 ; |
| 66 ; called after restart via the battery selection, after compass calibration, | |
| 67 ; and via ghostwriter at the end of a dive | |
| 68 ; | |
| 0 | 69 global surfloop |
| 70 surfloop: | |
| 623 | 71 clrf STKPTR ; clear return addresses stack |
| 72 ; clrf CCP1CON ; stop PWM | |
| 73 ; bcf PORTC,2 ; pull PWM output to GND | |
| 628 | 74 ; clrf CCPR1L ; backlight off |
| 623 | 75 call TFT_boot ; initialize TFT (includes clear screen) |
| 245 | 76 |
| 623 | 77 btfsc restart_fast ; shall make a fast restart? |
| 78 bra surfloop_1 ; YES | |
| 0 | 79 |
| 623 | 80 ; show heinrichsweikamp logo |
| 604 | 81 WIN_TOP .40 |
| 582 | 82 WIN_LEFT .10 |
| 623 | 83 TFT_WRITE_PROM_IMAGE_BY_ADDR hw_logo_block |
| 0 | 84 |
| 623 | 85 ; show textual OSTC logo |
| 604 | 86 WIN_COLOR color_white |
| 87 WIN_STD .30,.90 ; column, row | |
| 88 STRCPY_PRINT "Open Source" ; show OSTC banner text, line 1 | |
| 89 WIN_STD .20,.130 ; column, row | |
| 90 STRCPY_PRINT "Tauch-Computer" ; show OSTC banner text, line 2 | |
| 91 | |
| 92 WIN_COLOR color_white | |
| 93 WIN_SMALL .35,.180 | |
| 94 PUTC "v" ; print v | |
| 95 call TFT_cat_firmware ; print x.y | |
| 623 | 96 PUTC " " ; print _ |
| 604 | 97 call TFT_cat_beta_release ; print BetaZ or Release |
| 98 STRCAT_PRINT "" ; finalize output | |
| 99 bcf win_invert ; clean up eventual color-coding | |
| 100 call TFT_standard_color ; ditto | |
| 623 | 101 call TFT_Display_FadeIn ; dim up the display |
| 604 | 102 |
| 623 | 103 surfloop_1: |
| 104 ;---- Do all useful initializations that take time ----------------------- | |
| 604 | 105 |
| 623 | 106 ; set deco mode flags |
| 107 call restart_set_modes_and_flags | |
| 108 | |
| 109 bsf trigger_pres_cur_changed; set flag to have pressure written to display on first round of surface loop | |
| 110 bsf trigger_temp_changed ; set flag to have temperature written to display on first round of surface loop | |
| 111 | |
| 112 call I2C_sleep_compass ; shut down compass | |
| 113 | |
| 631 | 114 CLRT ext_flash_address |
| 115 | |
| 0 | 116 |
| 623 | 117 IFDEF _ccr_pscr |
| 118 movlw surface_sp ; load default surface setpoint (in cbar) | |
| 119 movff WREG,char_I_const_ppO2 ; store it as current setpoint | |
| 120 ENDIF | |
| 121 | |
| 122 IFDEF _external_sensor | |
| 123 call transmit_setpoint ; transmit current setpoint (in cbar) via S8 digital interface (currently disabled) | |
| 124 ENDIF | |
|
221
90923a081ae7
minor: configure buttons during splash screen
heinrichsweikamp
parents:
213
diff
changeset
|
125 |
| 623 | 126 bcf surfmode_menu ; not in surface menu (any more) |
| 127 bcf compass_menu ; not in "set bearing" selection (any more) | |
| 0 | 128 |
| 623 | 129 bcf switch_left ; clear intermediate button event since start/restart |
| 130 bcf switch_right ; clear intermediate button event since start/restart | |
| 131 | |
| 132 btfsc restart_fast ; shall make a fast restart? | |
| 133 bra surfloop_2 ; YES | |
| 604 | 134 |
| 628 | 135 call deco_calc_desaturation_time ; calculate desaturation and no-fly/no-altitude time (C-code) |
| 136 banksel common ; back to bank common | |
| 137 | |
| 604 | 138 call wait_1s ; wait <= 1 second |
| 139 call wait_1s ; wait 1 second | |
| 140 call wait_1s ; wait 1 second | |
| 0 | 141 |
| 142 ;---- Fade to standard surface view -------------------------------------- | |
| 143 | |
| 623 | 144 call TFT_Display_FadeOut ; dim down display to black screen |
| 145 call TFT_ClearScreen ; clear screen | |
| 146 | |
| 147 surfloop_2: | |
| 604 | 148 WIN_TOP .0 |
| 582 | 149 WIN_LEFT .0 |
| 150 WIN_FONT FT_SMALL | |
| 623 | 151 bcf win_invert ; clear flag for inverted text |
| 0 | 152 |
| 623 | 153 ; show button functionalities |
| 582 | 154 WIN_COLOR color_lightblue |
| 155 WIN_SMALL menu_pos_column,menu_pos_row | |
| 623 | 156 STRCPY_TEXT_PRINT tMenu ; show "<Menu" |
| 582 | 157 WIN_SMALL view_column,view_row |
| 623 | 158 STRCPY_TEXT_PRINT tView ; show "View>" |
| 582 | 159 call TFT_standard_color |
| 0 | 160 |
| 623 | 161 |
| 162 ;---- Logo in upper right corner ----------------------------------------- | |
| 628 | 163 |
| 623 | 164 ; show textual OSTC logo |
| 165 WIN_COLOR color_white ; set text color to white | |
| 166 WIN_STD .100,.2 ; set output position | |
| 604 | 167 STRCPY_PRINT "OSTC" ; show "OSTC" |
| 623 | 168 WIN_COLOR color_cyan ; set text color to cyan |
| 169 WIN_TINY .138,.2 ; set output position | |
| 604 | 170 STRCPY_PRINT "hwOS" ; show "hwOS" |
| 623 | 171 WIN_TINY .137,.14 ; set output position |
| 172 IFDEF _hwos_sport | |
| 173 STRCPY_PRINT "sport" ; show "sport" | |
| 174 ELSE | |
| 604 | 175 STRCPY_PRINT "tech" ; show "tech" |
| 176 ENDIF | |
| 623 | 177 WIN_TINY .100,.32 ; set output position |
| 178 call TFT_show_firmware ; show firmware version | |
| 0 | 179 |
| 180 | |
| 623 | 181 ;---- fill screen -------------------------------------------------------- |
| 182 call get_battery_voltage ; get battery voltage | |
| 183 call TFT_batt_surfmode ; display battery voltage | |
| 184 call TFT_time_surfmode ; display time | |
| 185 call TFT_date_surfmode ; display date | |
| 186 call TFT_pres_surfmode ; display surface pressure | |
| 187 call TFT_temp_surfmode ; display temperature | |
| 188 call TFT_decotype_surface ; display deco mode | |
| 582 | 189 |
| 623 | 190 TSTOSS opt_dive_mode ; in OC? (0=OC, 1=CC, 2=Gauge, 3=Apnea, 4=pSCR) |
| 191 call TFT_show_OC_startgas_surface ; YES - show first gas and "OSTC2-like" active gases | |
| 0 | 192 |
| 631 | 193 ; configure tissue graphics |
| 194 bcf tissue_graphic_mode ; select surface mode | |
| 195 bsf tissue_graphic_cns ; show CNS value | |
| 196 | |
| 197 bsf tissue_graphic_layout ; default to N2+He | |
| 198 TSTOSS opt_tissue_graphics ; shall show press+sat? | |
| 199 bcf tissue_graphic_layout ; YES - show press+sat | |
| 200 | |
| 201 bcf tissue_graphic_gf ; default to none-GF | |
| 202 TSTOSC char_I_model ; GF factors enabled? | |
| 203 bsf tissue_graphic_gf ; YES - show GF lines | |
| 204 | |
| 623 | 205 movff customview_surfmode,active_customview ; reload last custom view |
| 206 call surf_customview_mask ; redraw last custom view | |
| 582 | 207 |
| 623 | 208 call TFT_Display_FadeIn ; display resulting surface screen |
| 0 | 209 |
| 604 | 210 IFDEF _screendump |
| 623 | 211 btfsc screen_dump_avail ; screen dump function enabled? |
| 212 call enable_rs232 ; YES - activate RS232 (also sets CPU to normal speed) | |
| 604 | 213 ENDIF |
| 214 | |
| 623 | 215 bcf restart_fast ; clear flag for fast restart |
| 216 bsf imprint_surfmode_data ; start imprinting surface mode data | |
| 0 | 217 |
| 623 | 218 bcf switch_left ; clear pending left button event |
| 219 bcf switch_right ; clear pending right button event | |
| 0 | 220 |
| 623 | 221 rcall reset_timeout_surfmode ; reset timeout |
| 582 | 222 |
| 623 | 223 surfloop_loop: |
| 224 ; call TFT_debug_output ; optional debug output | |
|
188
ebc28381f17d
NEW: Show Bailout Gas List in Surface mode (CCR Modes)
heinrichsweikamp
parents:
187
diff
changeset
|
225 |
| 623 | 226 call test_switches_surfmode ; check switches |
|
188
ebc28381f17d
NEW: Show Bailout Gas List in Surface mode (CCR Modes)
heinrichsweikamp
parents:
187
diff
changeset
|
227 |
| 623 | 228 btfsc request_next_custview ; shall show next custom view? |
| 229 call surf_customview_toggle ; YES - show next custom view (and clear this flag) | |
| 0 | 230 |
| 623 | 231 btfss surfmode_menu ; shall enter surface menu? |
| 232 bra surfloop_loop_1 ; NO | |
| 233 bcf imprint_surfmode_data ; YES - stop imprinting surface mode data | |
| 234 goto do_main_menu ; - goto surface menu | |
| 582 | 235 |
| 623 | 236 surfloop_loop_1: |
| 237 rcall housekeeping ; handle data imprinting, screen dump request, timeout and entering dive mode | |
| 238 bra surfloop_loop ; loop in surface mode | |
| 582 | 239 |
| 0 | 240 |
| 241 surfmode_check_for_warnings: | |
| 623 | 242 clrf message_counter ; clear message counter |
| 560 | 243 |
| 604 | 244 ; warnings for all modes |
| 623 | 245 call check_warn_battery ; check if the battery level should be displayed/warned |
| 0 | 246 |
| 623 | 247 btfsc FLAG_apnoe_mode ; done for Apnoe or Gauge mode |
| 582 | 248 bra surfmode_check_for_warnings2 |
| 623 | 249 btfsc FLAG_gauge_mode ; done for Apnoe or Gauge mode |
| 582 | 250 bra surfmode_check_for_warnings2 |
| 0 | 251 |
| 604 | 252 ; warnings only in deco modes |
| 623 | 253 call check_and_store_sat_violation ; check/show tissue saturation |
| 254 call check_cns_violation ; check/show CNS value | |
| 255 call check_mbubbles ; check/show micro bubbles warning | |
| 256 movff int_O_lead_supersat+1,WREG ; get upper byte of leading tissue's supersaturation | |
| 257 btfsc WREG,int_warning_flag ; check if the warning flag is set | |
| 258 bra surfmode_check_for_warnings2 ; YES - outside model | |
| 259 rcall surfmode_check_for_desat ; NO - check/display desaturation time | |
| 260 rcall surfmode_check_for_nofly ; NO - check/display no-fly time | |
| 560 | 261 |
| 0 | 262 surfmode_check_for_warnings2: |
| 604 | 263 ; setup message page number |
| 623 | 264 incf message_page,F ; increment page number |
| 265 bcf STATUS,C ; clear carry bit | |
| 266 rlcf message_page,W ; each page can take two messages | |
| 267 cpfsgt message_counter ; number of actual messages > message capacity ? | |
| 268 clrf message_page ; NO - all messages could be shown, restart from first page next time | |
| 0 | 269 |
| 623 | 270 ; clear both rows if there is nothing to show at all |
| 271 tstfsz message_counter ; any message to show? | |
| 272 bra surfmode_check_for_warnings3 ; YES - look if second row needs to be cleared | |
| 273 goto TFT_clear_message_window ; NO - clear complete message area and return | |
| 0 | 274 |
| 582 | 275 surfmode_check_for_warnings3: |
| 623 | 276 ; clear 2nd row of messages if there is nothing to show (on this page) |
| 277 btfss message_2nd_row_used ; does the 2nd row contain a message? | |
| 278 goto TFT_clear_message_window_row2 ; NO - clear the 2nd row and return | |
| 279 return ; YES - done | |
| 280 | |
| 0 | 281 |
| 282 surfmode_check_for_desat: | |
| 560 | 283 banksel int_O_desaturation_time |
| 604 | 284 movf int_O_desaturation_time+0,W |
| 582 | 285 iorwf int_O_desaturation_time+1,W |
| 623 | 286 banksel common ; back to bank common |
| 287 bnz surfmode_check_for_desat_1 ; is the desat-time > 0 ? | |
| 288 return ; NO - done | |
| 289 surfmode_check_for_desat_1: | |
| 290 incf message_counter,F ; YES - increase counter | |
| 291 call TFT_desaturation_time ; - show desaturation time | |
| 292 return ; - done | |
| 0 | 293 |
| 294 surfmode_check_for_nofly: | |
| 560 | 295 banksel int_O_nofly_time |
| 604 | 296 movf int_O_nofly_time+0,W |
| 582 | 297 iorwf int_O_nofly_time+1,W |
| 623 | 298 banksel common ; back to bank common |
| 299 bnz surfmode_check_for_nofly_1 ; is the nofly-time > 0 ? | |
| 300 return ; NO - done | |
| 301 surfmode_check_for_nofly_1: | |
| 302 incf message_counter,F ; YES - increase counter | |
| 303 call TFT_nofly_time ; - show nofly-time | |
| 304 return ; - done | |
| 0 | 305 |
| 306 | |
| 307 ;============================================================================= | |
| 560 | 308 |
| 623 | 309 test_switches_surfmode: ; check buttons in surface mode |
| 310 btfsc switch_right ; right button pressed? | |
| 311 bra test_switches_surfmode2 ; YES | |
| 312 btfsc switch_left ; left button pressed? | |
| 313 bra test_switches_surfmode3 ; YES | |
| 314 return ; NO to both - done | |
| 315 | |
| 316 test_switches_surfmode2: ; right button pressed | |
| 317 bcf switch_right ; clear button event | |
| 631 | 318 rcall reset_timeout_surfmode ; set up timeout |
| 623 | 319 IFDEF _compass |
| 320 movlw .6 ; coding for surface custom compass view | |
| 321 cpfseq active_customview ; in compass view? | |
| 322 bra test_switches_surfmode2a ; NO | |
| 323 btfss compass_menu ; "set course" selection shown? | |
| 324 bra test_switches_surfmode2a ; NO | |
| 325 bsf compass_bearing_set ; YES - set new course | |
| 326 MOVII compass_heading_shown,compass_bearing | |
| 327 bra test_switches_surfmode3b ; - clear "Course" label and return | |
| 328 ENDIF | |
| 329 test_switches_surfmode2a: | |
| 330 bsf request_next_custview ; request next custom view | |
| 331 bcf compass_menu ; "set course" selection not shown anymore | |
| 0 | 332 return |
| 333 | |
| 623 | 334 test_switches_surfmode3: ; left button pressed |
| 335 bcf switch_left ; clear button event | |
| 631 | 336 rcall reset_timeout_surfmode ; set up timeout |
| 623 | 337 IFDEF _compass |
| 338 movlw .6 ; coding for surface custom view compass | |
| 339 cpfseq active_customview ; in compass view? | |
| 604 | 340 bra test_switches_surfmode3a ; NO |
| 623 | 341 btfsc compass_menu ; YES - "set course" selection already shown? |
| 342 bra test_switches_surfmode3b ; YES - remove it | |
| 343 call TFT_surf_set_bearing ; NO - show it | |
| 628 | 344 return ; - done |
| 623 | 345 ENDIF |
| 382 | 346 test_switches_surfmode3a: |
| 623 | 347 bcf compass_bearing_set ; clear course on entering menu |
| 348 bsf surfmode_menu ; flag that the surface menu shall be entered | |
| 582 | 349 return |
| 382 | 350 |
| 623 | 351 IFDEF _compass |
| 352 test_switches_surfmode3b: | |
| 628 | 353 WIN_BOX_BLACK .158,.190, .15, .99 ; clear "Course" label (top, bottom, left, right) |
| 623 | 354 bcf compass_menu ; clear flag for "set course" selection |
| 582 | 355 return |
| 623 | 356 ENDIF |
| 382 | 357 |
| 623 | 358 |
| 359 ; handle data imprinting, screen dump request, timeout and entering dive mode | |
| 360 global housekeeping | |
| 361 housekeeping: | |
| 362 btfss trigger_full_second ; new 1/1 second begun? | |
| 363 bra housekeeping_1 ; NO | |
| 364 | |
| 365 ; tasks any new second | |
| 366 bcf trigger_full_second ; YES - clear flag | |
| 367 call get_battery_voltage ; - get battery voltage | |
| 368 | |
| 369 btfsc imprint_time_date ; - shall imprint the current time & date? | |
| 370 call TFT_show_time_date_menu ; YES - imprint time and date on display (copies running time to latch registers) | |
| 371 | |
| 372 IFDEF _rx_functions | |
| 373 btfsc tr_functions_activated ; - TR functions activated? | |
| 374 call I2C_get_tankdata ; YES - get new transmitter data | |
| 375 | |
| 376 btfsc imprint_xmitter_pres ; - shall imprint transmitter ID and pressure? | |
| 377 call TFT_menu_tank_pres ; YES - imprint transmitter ID and pressure | |
| 378 ENDIF | |
| 379 | |
| 380 btfss imprint_surfmode_data ; - shall imprint all surface mode data? | |
| 381 bra housekeeping_0 ; NO | |
| 382 call TFT_time_surfmode ; YES - update displayed time | |
| 383 call TFT_batt_surfmode ; - update displayed battery voltage | |
| 384 btfss timebase_1sec,0 ; - on even second? | |
| 385 call surfmode_check_for_warnings ; YES - check for warnings and display/update them | |
| 386 | |
| 387 IFDEF _rx_functions | |
| 388 btfss tr_functions_activated ; - TR functions activated? | |
| 389 bra housekeeping_0 ; NO - skip tank pressure part | |
| 390 | |
| 391 call get_pressure_readings ; YES - get pressure readings | |
| 392 call TFT_surface_tank_pres ; - update first gas/diluent pressure | |
| 393 | |
| 394 movf active_customview,W ; - get current custom view | |
| 395 xorlw .10 ; - coding of tank data custom view | |
| 396 btfsc STATUS,Z ; - equal? | |
| 397 call TFT_surface_tankdata ; YES - update tank data custom view | |
| 398 ENDIF | |
| 399 | |
| 400 housekeeping_0: | |
| 401 bsf restart_fast ; default to doing a fast restart (no logos) | |
| 402 call set_dive_modes ; check if dive mode needs to be entered, will set dive mode flag if yes | |
| 403 btfsc simulatormode ; in simulator mode? | |
| 404 bra housekeeping_1 ; YES - can't restart or go to sleep without prior cleanup | |
| 405 btfsc divemode ; NO - need to enter dive mode? | |
| 406 goto restart ; YES - restart, will proceed to dive mode | |
| 407 btfss trigger_timeout ; NO - timeout? | |
| 408 bra housekeeping_1 ; NO | |
| 409 btfsc surfmode_menu ; YES - in surface menus? | |
| 410 goto restart ; YES - goto restart, will proceed to surface mode | |
| 411 bcf restart_fast ; NO - set next restart to be done slow, i.e. with logos | |
| 412 goto sleeploop ; - goto sleep mode | |
| 413 | |
| 414 housekeeping_1: | |
| 415 btfss trigger_quarter_second ; new 1/4 second begun? | |
| 416 bra housekeeping_2 ; NO | |
| 0 | 417 |
| 623 | 418 ; tasks any new 1/4 second |
| 419 bcf trigger_quarter_second ; YES - clear flag | |
| 420 IFDEF _external_sensor | |
| 421 btfsc imprint_sensor_mv ; - shall imprint sensor mV data? | |
| 422 call TFT_menu_calibrate ; YES - imprint sensor mV data | |
| 423 ENDIF ; _external_sensor | |
| 424 btfss imprint_surfmode_data ; - shall imprint all surface mode data? | |
| 425 bra housekeeping_2 ; NO | |
| 426 btfsc trigger_pres_cur_changed ; YES - pressure changed? | |
| 427 call TFT_pres_surfmode ; YES - display surface pressure | |
| 428 bcf trigger_pres_cur_changed ; - clear flag (anyhow) | |
| 429 IFDEF _compass | |
| 430 movf active_customview,W ; - get current custom view | |
| 431 xorlw .6 ; - coding of compass custom view | |
| 432 btfsc STATUS,Z ; - equal? | |
| 433 call TFT_surface_compass_heading ; YES - update compass view | |
| 434 ENDIF ; _compass | |
| 435 IFDEF _external_sensor | |
| 436 btfsc FLAG_ccr_mode ; - in CCR mode? | |
| 437 bra housekeeping_1a ; - YES - handle sensors | |
| 438 btfsc FLAG_pscr_mode ; - in pSCR mode? | |
| 439 bra housekeeping_1a ; YES - handle sensors | |
| 440 bra housekeeping_2 ; NO to both | |
| 441 housekeeping_1a: ; handle sensors | |
| 442 movff opt_ccr_mode,WREG ; =0: fixed SP, =1: sensor, =2: autoSP | |
| 443 decfsz WREG ; opt_ccr_mode = 1 (sensor)? | |
| 444 bra housekeeping_2 ; NO - skip sensor readings | |
| 445 call calc_deko_divemode_sensor ; YES - read & calculate sensor data | |
| 446 call TFT_surface_sensor ; - update displayed sensor data | |
| 447 call TFT_sensor_surface_warning ; - show a down-arrow behind sensor readings when sensor is at end-of-life | |
| 448 movf active_customview,W ; - get current custom view | |
| 449 xorlw .9 ; - coding of sensor mV readings custom view | |
| 450 btfsc STATUS,Z ; - equal? | |
| 451 call TFT_sensor_mV ; YES - update mV readings | |
| 452 ENDIF ; _external_sensor | |
| 453 housekeeping_2: | |
| 454 btfss trigger_full_minute ; new 1/1 minute begun? | |
| 455 bra housekeeping_3 ; NO | |
| 456 | |
| 457 ; tasks any new minute | |
| 458 bcf trigger_full_minute ; YES - clear flag | |
| 459 btfsc simulatormode ; - in simulator mode? | |
| 460 bra housekeeping_2a ; YES - real tissues are in the vault, skip desaturation calculations | |
| 461 call deco_calc_dive_interval_1min; NO - calculate 1 minute at surface conditions (C-code) | |
| 462 call deco_calc_desaturation_time ; - calculate desaturation and no-fly/no-altitude time (C-code) | |
| 463 banksel common ; - back to bank common | |
| 464 housekeeping_2a: | |
| 465 btfss imprint_surfmode_data ; - shall imprint all surface mode data? | |
| 466 bra housekeeping_3 ; NO | |
| 467 call TFT_date_surfmode ; YES - update displayed date | |
| 468 | |
| 469 btfsc trigger_temp_changed ; - temperature changed? | |
| 470 call TFT_temp_surfmode ; YES - display temperature | |
| 471 bcf trigger_temp_changed ; - clear flag (anyhow) | |
| 472 | |
| 473 movf active_customview,W ; - get current custom view | |
| 474 xorlw .5 ; - coding of tissue custom view | |
| 475 btfsc STATUS,Z ; - equal? | |
| 476 call TFT_surface_tissues ; YES - update tissue diagram | |
| 477 | |
| 478 movf active_customview,W ; - get current custom view | |
| 479 xorlw .8 ; - coding of last dive info custom view | |
| 480 btfsc STATUS,Z ; - equal? | |
| 481 call TFT_surface_lastdive ; YES - update last dive infos | |
| 482 | |
| 483 housekeeping_3: | |
| 484 ; tasks any round | |
| 485 IFDEF _screendump | |
| 486 btfsc screen_dump_avail ; screen dump function enabled? | |
| 487 call TFT_dump_screen_check ; YES - check if requested and do it | |
| 488 ELSE | |
| 489 btfsc comm_mode_disabled ; COMM mode disabled? | |
| 490 return ; YES - done | |
| 604 | 491 ENDIF |
| 623 | 492 btfss surfmode_menu ; in surface menus? |
| 493 return ; NO - done | |
| 494 | |
| 495 btfsc simulatormode ; currently in simulator (deco calculator) mode? | |
| 496 return ; YES - suppress COMM mode to not jeopardize backup/restore of tissue data | |
| 497 | |
| 498 btfss vusb_in ; USB plugged in? | |
| 631 | 499 return ; NO - done |
| 623 | 500 IFDEF _screendump |
| 501 btfsc screen_dump_avail ; YES - screen dump enabled? | |
| 502 return ; YES - no COMM mode to be able to make screen shots of the menu and simulator mode | |
| 503 ENDIF | |
| 631 | 504 btfss ble_available ; skip "USB" check in all Bluetooth models (required for very old OSTC sport) |
| 623 | 505 goto comm_mode_usb ; YES / NO - proceed to COMM mode, will also set CPU to speed normal |
| 629 | 506 return |
|
188
ebc28381f17d
NEW: Show Bailout Gas List in Surface mode (CCR Modes)
heinrichsweikamp
parents:
187
diff
changeset
|
507 |
| 631 | 508 |
| 623 | 509 global reset_timeout_surfmode |
| 510 reset_timeout_surfmode: | |
| 511 movlw surfmode_timeout_default ; load default timeout value | |
| 631 | 512 btfss battery_is_36v ; running on a 3.6 V battery? |
| 513 movlw surfmode_timeout_aa_15v ; NO - replace by timeout for 1.5V battery | |
| 623 | 514 btfsc simulatormode ; currently in simulator (deco calculator) mode? |
| 515 movlw surfmode_timeout_simulator ; YES - replace with simulator timeout | |
| 631 | 516 ;bra reset_timeout_time ; set timeout value |
| 517 | |
| 518 ; btfsc imprint_sensor_mv ; currently imprinting O2 sensor mV data? | |
| 519 ; movlw surfmode_timeout_calibrate ; YES - replace with CCR Calibrate Menu timeout | |
| 520 ; IFDEF _rx_functions | |
| 521 ; btfsc imprint_xmitter_ID ; currently selecting pressure transmitter? | |
| 522 ; movlw surfmode_timeout_xmitter ; YES - replace with transmitter selection timeout | |
| 523 ; ENDIF ; _rx_functions | |
| 524 ; IFDEF _external_sensor | |
| 525 ; btfsc surfmode_menu ; in surface menu? | |
| 526 ; bra reset_timeout_time ; YES - keep timeout value | |
| 527 ; btfsc FLAG_ccr_mode ; NO - in CCR mode? | |
| 528 ; bra reset_timeout_surfmode_loop ; YES - continue checking if in sensor mode | |
| 529 ; btfsc FLAG_ccr_mode ; NO - in pSCR mode? | |
| 530 ; bra reset_timeout_surfmode_loop ; YES - continue checking if in sensor mode | |
| 531 ; bra reset_timeout_time ; NO - keep timeout value | |
| 532 ;reset_timeout_surfmode_loop: | |
| 533 ; movff opt_ccr_mode,lo ; get loop mode (=0: fixed/calculated SP, =1: sensor, =2: auto SP) | |
| 534 ; decfsz lo,f ; in sensor mode? | |
| 535 ; bra reset_timeout_time ; NO - keep timeout value | |
| 536 ; movlw surfmode_timeout_sensor ; YES - replace with sensor mode timeout | |
| 537 ; ENDIF ; _external_sensor | |
| 538 ; ;bra reset_timeout_time ; set timeout value | |
| 0 | 539 |
| 623 | 540 |
| 541 global reset_timeout_time | |
| 542 reset_timeout_time: ; entry point with timeout value in WREG | |
| 543 movwf isr_timeout_reload ; copy WREG to isr_timeout_reload | |
| 544 bsf reset_timeout ; request ISR to reset the timeout | |
| 545 bcf trigger_timeout ; clear any pending timeout trigger | |
| 546 return ; done | |
| 547 | |
| 548 ;----------------------------------------------------------------------------- | |
| 549 | |
| 550 END |